Am I seeing thin gray vertical lines on my 8X10 print because I am using the trial version?

Am I seeing thin gray vertical lines on my 8X10 print because I am using the trial version?

No. First check your ink levels and try printing something from another program to be sure you don't need to run a cleaning routine for your printer. Also, if you have an older printer occasionally you'll see those lines if your resolution in ppi isn't a whole number (in other words 347 ppi works, but 346.983 makes lines). That's not so common nowadays, though, so unless your printer is quite old it's unlikely to be the cause.

Similar Messages

  • Gray vertical line on crop

    Hello! I imported a .mov clip that was shot on green screen. I cropped the clip on the left to remove some of the "non-green" elements. When I do a preview I see a light gray vertical line where I did the crop. Not sure what's going on there. Any ideas?
    You can see it here:
    http://www.retailcontrol.com/video-test/
    I'm using Motion 5.0.4
    Thanks!
    Andy

    I have seen this efect before and I don't recall there being a solution given. You might try using a B-Spline or Bezier mask to mask out the elements on the left instead of cropping. I have had good luck with that.

  • Why are there 2 thin red vertical lines on the screen of my MBP 15" retina which is only 2 months old!

    I would just like to understand why there a two thin red vertical lines on the screen
    I suspect I need to bring into an apple store for diagnostics but is anyone aware of the likely cause?
    thanks v much!

    It could be a GPU issue, a display issue or a display connection issue.  The genius bar technician will offer you a definitive answer and should fix it under the warranty provisions.
    Ciao.

  • Help please. T22, Thin blue vertical line on my screen????​??

    Hi, Can anyone help me , I have a thin blue vertical line on my thinkpad t22 screen, how can i remove it

    Take it in for service. You may need to replace the screen.

  • Iphone 5 gray vertical lines

    Any ideas:
    I have my mother's iPhone 5.  Screen broke so we had it repaired at the Apple Store.  So now the same device has a "newer" display assembly.  However, all of a sudden, the screen went blank.  Apple Store acknowledged the issue and replaced the device.  However, two months ago, on the phone there are gray vertical lines and the touch is not responsive.  The phone works otherwise except for the LCD and touch screen.  The phone is out of warranty so I bought a display assembly, replaced it myself.  Since it was an "LCD" issue, replacing it would solve the problem.  However, even with the replaced display, the same problem persists.  I still have gray vertical lines and touch screen is unresponsive.
    All connectors are seated properly.  Powercycled the battery.  Any ideas?

    don't be afraid to upgrade, it's surely an hardware problem. If that thing happens again, go to apple store, they will repair it or gave you an other one, the warranty is one year .

  • I'm trying to install adobe acrobat XI pro, the trial version. The Install Download Assist pops up but the program doesn't install. I do see a file named XI Pro, but not a program. It seems the program never completely downloads. Any suggestions? Thanks.

    I've tried to download the trial version of Acrobat XI pro but it's not working. The time bar is active for the download and indicates that it will take two hours. When I come back, the screen has gone back to the "install free trial here" page. I do see a file for XI Pro, but not a program.

    try a direct download,
    Downloads available:
    Suites and Programs:  CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5 | 4 | 3
    Captivate:  7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • I recently installed the trial version of Adobe XI and the trial period ended, so I wanted to revert back to the version I already had. I did not see any uninstall feature and my old version was apparently replaced by the trial version. I cannot re-instal

    I recently installed the trial version of Adobe XI and the trial period ended, so I wanted to revert back to the version I already had. I did not see any uninstall feature and my old version was apparently replaced by the trial version. I cannot re-install a previous version b/c I need both a product Id (GOd only knows where that is now) and a way to uninstall the trial. Any ideas?

    When you installed the trial, there should have been an option to have ignored your current installation and leave it. Apparently you skipped that case. To uninstall the trial (in Windows) go to Control Panel>Programs & Features and select the Acrobat XI and choose uninstall. After the uninstall run http://labs.adobe.com/downloads/acrobatcleaner.html to clean up your system. HOWEVER, if you see your old Acrobat in that window, do not run the cleaner, but do a repair on the old version.
    You did not mention the old version you had. You might try from http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html. As for the S/N, you should have register and if so you can get it from Adobe. The instructions are at http://helpx.adobe.com/x-productkb/global/find-serial-number.html#adobeproductdownload.
    Be sure to backup any download of the old installer and the S/N to CD or backup HD for future use. They will not likely continue to be available.

  • Why does a gray screen display whenever I try to open a pdf (or any file) using the updated version of adobe

    Why does a gray screen display whenever I try to open a pdf (or any file) using the updated version of adobe

    Chances are you are looking at the place holder of a large image. Go to the preferences and check that View Large Images is checked.

  • Can I used Dreamweaver CS5.5 to learn to build and style a web page? I see the CC version but I want to use the earlier version. THx

    Can I used Dreamweaver CS5.5 to learn to build and style a web page? I see the CC version but I want to use the earlier version. THx

    you can use the 30 trial and/or purchase from a 3rd party.
    for the trial:
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  6| 5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5 | 1
    Contribute:  CS5 | CS4, CS3 | 3,2
    FrameMaker:  12, 11, 10, 9, 8, 7.2
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • All I see is colored vertical lines!!!

    I had booted into vista and was updating it while reading about windows 7 and thinking what crap it is compared to my mac when the screen suddenly frooze and it got filled with vertical lines of random colors.
    I rebooted my macbook several times but it didnt solve the problem. It did give the startup sound but vertical colored lies was all i could see.
    Then I reseted my pram, reset the logic board by removing the battery and pressing the power button for 5 seconds, no use!
    Upon calling Apple Care I was askied to take it to the service center. At the service center while my macbook was being checked I was busy thinking how this whole 'switching' to mac has been. I purchased my mac on July 8, 2008.
    1. 10 days after purchasing my white fiber body macbook, the charger dies. I live in Mumbai, India's largest city but they have to make me wait for like a week untill the new charger arrives from Banglore.
    2. In September I see a dead pixel on the LCD. Apple says untill there are atleast 5 they can't replace it!
    3. In November the entier body begins to turn yellow. The bottom fiber body develops cracks. The place on the keyboard panel where the magnets connect breaks because of the magnet. Apple replaces the keyboard panel but refuses to change the bottom case saying that its not covered under warranty and that 'its written so' in the warranty (which isnt!).
    4. In december i notice more dead pixels. Finally Apple arranges to send me a new macbook altogether. As the 2.4ghz white fiber body one I have gets out of stock and is no more in production they send me the late 2008 aluminum macbook 2.4ghz. wow! they also renew my warranty starting from december 08.
    5. Yesterday, the vertical lines appear out of nowhere.
    Accept for the fact that they sent me a much better laptop as a replacement, which shows that apple cares, the whole switching thing hasnt been really hassle free. I have come to realize that what makes apple so different is OS X and the design they give to their products. Its certainly not the hardware. Considering the fact that the charger went bad, the body turned yellow, the dead pixels on the LCD and now the vertical lines on the LED, I think apple hardware is no better than that of dell or sony. Infact, my Toshiba laptop that I'm on right now is older than my macbook(s) and hasnt faced a single hardware issue yet.
    I was just wondering what would I do if such things happen (and from the looks of it, they are bound to happen) after the warranty period. The apple extended warranty is a whooping Rs.13000/-. For Rs 15000/- people buy desktop computers with LCD monitors here in India!

    They have said they are gonna replace the LED panel. Also, if this was to happen post warranty, they would had charge Rs1600 for diagnosis plus the cost the LED panel. I swear to God the moment something happens to this piece of crap after warranty I am gonna throw it in the store room where i keep my junk. I'm not gonna bear the cost of a single repair and fill Apple's coffers. For now, I assume my 60 grands i spent on buying this over hyped machine is a waste.
    And good this happened just days before I was about to buy the 36 grands iPhone. I would be better off buying a htc touch for 15 grands which has all the same features.
    Neerav
    PS. the aluminium one they sent me costs as high as 96 grands! u definitely dont expect such behaviour out of it.
    Also, the guys at apple service center say this happend because i updated leopard in the wrong manner! they say i should not directly click 'install' in the software update window but should rather go to the menubar and select 'download only' and then install it! the engineer in me is confused.

  • Gray vertical lines on MacBook unibody screen!!!!?

    I received my MacBook for Christmas/graduation I have had it less than 3 years. I absolutely loved this computer until now. One day I was surfing the web and all of a sudden my screen went gray with vertical lines and I can no longer use it. I'm very dissapointed considering that I have babied this computer since the day I got it and never dropped it or anything! I went to apple and they said most likely it will be batten $600 and $800 to fix it. I am a college student and I can not afford that. Apple employees have also said they have seen this before and they can't explain to me the problem Nor do they know how to fix it right the first time. I don't know what I should do I am truly upset that there is no reason this should be happening and as much as I love (loved) my Mac I'm probably just going to have to get a cheep computer that will last longer... Unless anyone knows how this can be fixed cheep I will turn my back on Mac

    GPU is failing or bad cable or connection.
    Genius reservation http://www.apple.com/retail/geniusbar/
    on-line https://getsupport.apple.com/GetproductgroupList.action
    check warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do

  • 15" LCD has many thin colored vertical lines. HELP!

    I have Model # a1286 I think. It is a mid-2009 model. There are so many vertical, and some horizontal, lines blocking a third of my screen. It looks like there is a crack but the glass isn't broken, just lines on screen. HELP! I have no warranty, this started exactly 3 months after 1 yr. warranty was up and I have no Applecare. I know part or all of the problem is the LCD because a screenshot does not show the lines. If you press on the screen, the lines change color or it just adds more lines.
    I am 3 hours from an Apple store but I will take it I have to.
    It is not the same as the "strange vertical lines" issue. Each line is the width of a pin but goes down the whole screen and colors are pink, red, green, blue, yellow and light blue and there is now a BIG thick white bars with the lines over them (sese pic).
    I attached an iphone picture but it is kind of dark. I will retake a brighter picture tomorrow.

    The picture is OK; it tells the story quite well.
    Can you connect an external monitor? If the problem goes away on the external, that indicates a fault in the built-in display assembly, but not the graphics chipset or the logic board.

  • 20" iMac screen is gray with blue and gray vertical lines after restart

    Hey, I have a 20" Intel iMac that I purchased about 2 years ago. I have had no problems with it at all until yesterday afternoon. I had just woken it from sleep (no problems at all with the screen), used it for 5 minutes to check email and then left for 10 minutes only to come back to this on the screen:
    http://www.flickr.com/photos/47548003@N03/4357722284/
    I have tried restarting with the same result each time. The computer starts up with a gray screen that fades around the edges to the picture shown above. I am still able to use the computer with an external monitor, so obviously just the screen seems to be affected. Any ideas about what could be wrong?

    Welcome to Apple Discussions.
    It looks like the graphics card may be failing. If you are covered by AppleCare contact Apple immediately, if you are not I would recommend bringing it into an Apple Authorized Service Provider to be checked out.
    Sorry for being the bearer of bad news.
    Roger

  • I have illustrator cs5, and I have plans, the side, rear, front elevations of  vehicles,. I did a line trace of these elevations and projected them using the  perspective selection tool to the perspective grid, but I get distorted image on it, I am trying

    I have illustrator cs5. I have front, side, rear, plans of vehicles. I need to create 3D illustrations. I did a line trace of these elevations and projected them to the perspective grid using the perspective tool.  I got distorted image on each side of the grid.  What do I need to do?

    Please show.

  • Thin purple vertical line appears on my Mac Pro screen

    A few days ago I started getting a thin purple line running vertically on my Mac Pro Screen. It comes and goes.

    It is probably a hardware fault. Make and appointment with your Apple Store to have it checked.

Maybe you are looking for

  • Help needed in Java Printing Service

    I need to print an image using the new JPS API, but with specific requirements. I managed to find out how to get the image printed from my HD onto the printer by using the example given in the JPS user guide. But I can't seem to find out how to achie

  • Developing plug-ins for BEA Weblogic Studio

    Can anyone provide pointers on documentation on developing plug-ins for BEA Weblogic Studio (e.g like this one https://beajunitplugin.projects.dev2dev.bea.com/ ) Regards, -N

  • Iview for Webdynpro ABAP application with TimedTrigger

    Hello, I created an IView  for a WebDynpro  ABAP  application. This application uses a UI element TimedTrigger. Without portal integration this TimedTrigger works fine. Inside an IView  this TimedTrigger element does not work anymore. Did anyone have

  • BPEL sensors log

    Hi I have BAM Sensors in BPEL process at various activities. The data is published to BAM DO. How to check the logs, payload any details related . The sensor tab in the BPEL COnsole...Does that show any details....bcoz I dont see anything there.... W

  • Why am I seeing multiple copies of my sent messages (in Trash)?

    Why are my sent emails multiplying in the Trash mailbox?