Am I the Albatross?

David;
As you didn't answer my last CS Review problem (Can't Delete Reviews...carried over from the beta testing), I will add to the issue. I have Safari for the PC installed on my 'Lite' laptop (not part of the beta testing) and, even though I have IE 8 selected as my default browser, my CS Review ALWAYS launches in Safari! I ALWAYS get the, what I now call, default response that, "You don’t have the latest version of the Adobe Flash Player. You must install it to use Adobe Acrobat.com. Get it here." Yep...I've installed it at least five times now. This falls under the Safari shortcomings (so many under the new w3.org standard requirements). WHY does CS Review insist on seeking out the Safari.exe command over the default browser? This is a real issue for me. Yes, I can uninstall Safari but, as I am also a web programmer/developer, I don't feel that I can always trust the browser lab in DreamWeaver.
As to my original issue, if I have NO control over all the content that must load in CS Review when I launch it from Photoshop then I can not use it! People have my email address and I don't want to be permanently tied to their review requests [one of these people has 40 (!) files]! I OWN my version of Photoshop. I want control!

Given my personal experience with both the ReSound LiNX and Starkey Halos paired with my iPhone, i can confirm that the interplay between both hearing aids and the iPhone is far from perfect. However, I don't think it is more Apple's problem than it is ReSound or Starkey. Apple has developed technical and programming interfaces to work with a large universe of Bluetooth devices. Consequently, the responsibility for connecting really relies on the device manufacturers to craft devices that meet the connectivity standard as it is defined. That hearing aids experience struggles there doesn't surprise me. The miniaturization of circuitry and the functionality they can pack into very small devices is astonishing.....but also leads to compromise as any other micro-miniature device would have compromises.
My more immediate concern for you is that you have been told that you must disconnect your hearing aids from your iPhone before answering a land line handset. That doesn't sound right.

Similar Messages

Hello- I would like to have new pages open in a separate tab automatically...(i.e., Google--- Google listing---click on listing-----auto open new tab and put the page of the google listing that I selected, on the new tab. Thanks. RMartinez

Hello again-
Here is my scenario-
I am browsing, and let's say, I'm on Google. I look up "albatross novels." I get 6 hits. I look at the list, and I pick one of them. I double-click on it, and away we go. My current Google search page is REPLACED by the selected "albatross" site. But it's not exactly what I want. So now I click the BACK ARROW to go back to the Google page, to look at the other 'albatross" hits. And now I find another site, replacing my Google page when I open it......And THAT site takes me to another site, and another, and yet another......But then I realize that the first site WAS the best one. Now I have to hit the back button 15 times and probably NOT reach the Google page from which I started.
But if I could have the new pages open in a new tab, then I could go back and forth between all the pages without worrying about the back button.
I am sure that this is just a setting change somewhere, but I can't find it....I do have it on my work computer.
Thanks/Rod Martinez

When I open a link from a search it does open in a new tab ''(it is new, but it is at least in Firefox 4+)'' 
'''browser.search.openintab''' user set '''true'''
'''More information on configuration variables''' available in
[http://kb.mozillazine.org/About:config_entries about:config entries] and for users not familiar with the process there is [http://kb.mozillazine.org/About:config about:config] (How to change).
You will find interesting reading on tabs in
* '''Tabbed Browsing''' in Firefox http://dmcritchie.mvps.org/firefox/tabs.htm
* '''Tabs configuration''', extracted from About:config entries - MozillaZine Knowledge Base http://dmcritchie.mvps.org/firefox/tabs_config.htm
* 001 '''Tab Capacity Test''' http://dmcritchie.mvps.org/firefox/tab_capacity/001_with_underscore.htm##
* '''Tab Color Underscoring active/read/unread''' (Fx3.6) - Themes and Skins for Browser - userstyles.org actually colors all borders not just an underline-- see picture in Tabs Bar Minimal Size http://userstyles.org/styles/24728
* '''Tabs, Enlarge list-all-tabs button''' - Themes and Skins for Browser - userstyles.org http://userstyles.org/styles/18553
* '''Tabs Bar Minimal Size''' - Themes and Skins for Browser - userstyles.org http://userstyles.org/styles/9043
From a Google search you should have the pages open in another tab, but with Google that is not quite good enough because they have them open all in the same new tab ''as you noticed so you've done that''.
* Search and Substitution Shortcuts especially for Firefox users http://dmcritchie.mvps.org/firefox/search.htm
You can use '''Ctrl+click''' or '''Ctrl+Shift+click''' to open a link in a new tab.
* Firefox and other Browser Keyboard Shortcuts (Comparison Table) http://dmcritchie.mvps.org/firefox/keyboard.htm
You can use '''app-tab''' to pin the tab, right-click on the tab and choose pin-tab and the opposite to unpin tab, or delete the tab when done.

10.4.11 Has Apple addressed/fixed issues with the latest update to Tiger?

Like many of you, I installed the 10.4.11 update last weekend with disastrous results. I eventually had to Archive and Install and my machine seems to be recovered. Has anybody had this problem and gone on to try the update a second time with better results ?? Any words of wisdom?? or had some sort of feedback from Apple to indicate they have or are going to resolve the problems with this update.

+I just posted this on the thread that seemed geared to those who "had success" (many more than half had issues) with the recent update after pi55ing and moaning due to crashing several times while trying to post there. Subsequently I found this thread and a bit of absoultion. I have eliminated the links, thinking them redundant but they are posted to that thread.+
"If stupidity got us into this mess, then why can't it get us out?" "
- Will Rogers (1879-1935)
A little story, when I first tried to install Jaguar on my then Beige (Yeah, remember them!) G3 MT, it took me a full six months to get that "Darn Cat" in that house! Oh, how I sweated and swore, you talk about "legacy", I waved every "dead chicken" that was suggested to no avail. Ended up that before I bought the unit someone had switched out the CD/ROM for one from one year later, still Apple issue, mind you. I sent to OpAmp and got an original and "The Cat" slid in as quick as grease through a goose. That's how tightly wound Apple was and still is in many ways and is why they stopped the clones. This was one of a slew of many little things you had to get used to in "Mac Land".
One other small thing you used to do a "clean install", you still can, but under OS 9, after you were satisfied (Conflict Catcher made things ever so easy!) all was peachy, you could simply trash your Previous System Folder and get back some valuable disk space. Well not to long after my success with the install of Jaguar and still not understanding OS X at all, I was still working mainly in OS 9, I did a Clean Install on my OS X, horsed around with settings which was difficult without Conflict Catcher and bravely trashed my Prev Sys Folder. Don't ever, EVER do that. What is a seemingly empty shell but for redundant Apps and meaningless abbreviations, is indeed a necessary if gigabyte eating Albatross you are doomed to carry!
My point with these two parables is that we are creatures of trust and habit, living on borrowed time. We have been blessed with a computer system that is virtually foolproof given certain caveats, caveats if adhered to even marginally would guarantee success. I my self have gotten into some very bad habits of late and think that this may be the cause of my computers malaise.
Drop to your knees and be grateful you don't have a PC (shudder!)! Yes Virginia, there is an Insanity Clause! I just installed WinXP on an Intel Mac, and after it was over all I wanted was a stiff drink and a shower!
+There's always something worse than he77, there's always Vista!+
Message was edited by: fla_cracker

Three movies I bought from iTunes this morning do not show up on the 1st Gen AppleTV.

I understand some file formats are not compatible with AppleTV (1st gen) but these films were purchased directly from iTunes. One would assume they are formatted properly to work on Apple equipment, yes? Previously purchased movies show up on the AppleTV just fine, so I'm not sure what's going with these three. They were from the $4.99 Sci Fi collection: Enemy Mine, Dune and Terminator 2. Oldies but goodies. The iMac, where the iTunes Library lives is used to stream the content to the AppleTV, and everything that is in my Library appears to be available for streaming, except these three films. Any advice?

I have now restored Factory Settings on the Apple TV. Looked promising until iTunes hangs everytime I tried to enter the podcast page of the sync options. And I get errors that my newest movies, created in Final Cut Pro X with the Share with 720p Apple Devices export settings are not compatible with Apple TV.
Unbelievable.

Re: Column is not getting displayed in the BI report

Hello Gurus,
I have developed a BI report with more number of parameters.
Case 1:
When i run my report , I am able to see data for particular condition but one column doesn't show any thing. All the rows in the column are blank.
Case 2
I tried to put the blank column as parameter, The Program works with out displaying that column data.
I am not sure where it is going wrong. I tried running the code in toad and i am able to see the data.
I have checked the code, Parameter description, length, Template and data definition.
Please help.
Thanks,
Sreekanth

Hi ,
For that column did u changed any alias name in the query...
check ur template once by loading the xml data...
check that column form field that matches with the xml tag or not..
Thanks,
Ananth

Since I installed FF4 each time I start up internet FF doesn't open and gives the report that it cannot find the proxyserver.

Already I have changed the settings to no proxy, but it doesn't work. Each time I want to open internet again I get the same report and I have to change the setting to no proxy again! Also I noticed that FF has changed the proxy adjustment himself to 'manual proxy configuration' where it has introduced HTTP-proxy 127.0.0.1 and port 63030 himself! How can I change this for good?! So that I don't have to change the setting each time I want to open internet.

Thank you for this information. I am going to get rid of my i Phone5c because of this policy of Apple! Maybe they need sued to stop this policy!

I am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier

i am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier photo please help me to recover my photos

Well I'll guess you're using iPhoto 11:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Using S-Video w/ the Mini DVI to Video Adapter

I just purchased a MacBook last week and I also purchased a Mini DVI to Video adapter for it so I can use the built-in DVD player to watch movies on my TV. I have a composite to composite cable and that worked fine when I connected the cable between the Mini DVI to Video Adapter and my TV. However, when I tried to use a S-Video cable and connected that between the Mini DVI to Video Adapter and my TV; then I got no picture at all. All I saw on the TV was a picture of the MAC desktop w/o the dock and the movie or nothing else played at all.
Is the composite connection a better connection for the MAC, or, are there some settings I need to work with on the MAC to get the S-Video connection to work?

I managed to figure this one out, by fluke. The MacBook has to be powered on and ready for user input prior to connecting the mini DVI to video adapter with the s video already connected to it, and to the TV. Once I did it this way, it worked fine. I just thought I'd share this.

Refreshing the Data from a embed view in a view container

Hi everybody
I would like to know how can I do to refresh all data from a View with a view container the problem is:
that I have a window that has a view at the same time this has a view container. The Main view brings the data of editable elements when I select one element of the main view the view container brings a list for that element (dependencies) but only the first time a choose an element loads the correct data, when I choose another one it brings the same old data and doesn't make the call for the wdDoInit() method.
The question is:
How do I force the view to refresh all the data or call again the wdDoInit() method?
Thank you for your help

Aida,
Lets say you have two components C1 and C2 and you want method from C1 to be available in C2 then follow these steps:-
1) Goto the Interface Controller of C1 and create a method there lets say doSomething
2) Then goto C2. There you can see Used Web Dynpro Components --> Right click Add Used Component --> Give some name say C1Comp --> Click browse and select C1 --> Click Finish.
3) Next goto Component Controller of C2 --> Properties --> Click Add and check if C1 is added. If not then select the checkbox and select OK.
4) Now goto Implementation tab of C2 and lets say wdDoInit you can write following code:-
wdThis.wdGetC1CompInterface().doSomething();
Chintan

Is there a way to open two months at the same time in iCal?

I have recurring events for every month in 2009 and want to replicate them in 2010. I do not want to just extend the stop date because there will be subtle changes to the 2010 items that I do not want changed in the 2009 versions. I would ideally like to open Jan 2009 and Jan 2010 next to each other and copy the 2009 event to the 2010 calendar (the appointment copy does not copy the recurrence info which is good). Is there a way to show either two instances of iCal running or 2 month windows?
Thanks!

Hi,
If you activate iCal's Debug menu, you should find it has a 'New Calendar Window' option (Cmd-L). It is a bit of a knack to cutting and pasting correctly between windows.
Best wishes
John M

Possible to see at a glance who has/has not viewed pdf via the 'Tracker'?

We are working on setting up procedures for Browser-based reviews. We were hoping we'd be able to see at-a-glance who had/had not viewed or sent back comments, and the date they sent them in the Tracker, but it seems to be just a list of who it was sent to originally. How do you know who has sent comments, other than manually scrolling through all the comments to see people's names?

Hi;
No, there isn't a way for you to see anything about who has saved progress.
Thanks,
Josh

How do I find, at-a-glance, the sample size used in several music files?

How do I find, at-a-glance, the sample size used in several music files?
Of all the fields available in a FInder Search, "Sample Size" is not available. Finder does offer a "Bits per Sample" field, but it only recognized graphic files and not music files.
Running 10.8.5 on an iMac i5.
I did search through a couple of communities but came up empty.
Thank you,
Craig

C-squared,
There is no View Option to allow display of a column of sample size.
For WAV or Apple Lossless files, it is available on the Summary tab (one song at a time, as you know). For MP3 and AAC it is not available at all.
You can roughly infer it from the files that are larger than expected for their time.
99% of the music we use is at the CD standard of 16-bit, so I can guess that displaying it has never been a priority. However, if you want to make a suggestion to Apple, use this link:
http://www.apple.com/feedback/itunesapp.html

PSE icons instead of the photo. I need to view photos at a glance. Please help me????

Please help, this is driving me crazy. I have downloaded my free PSE #9, it came with my Leica Camera. I cannot view at a glance any of my photos. There is only an icon that reads, PSE. To view any of my photos, I must click select and then preview. This gets old, and I am doing 4 times the work. I am having to use the dates to guess where my photos might be. I hate this! My old Photo Shop #5 didn't do this. When you went to my pictures, you could see every photo.
I have tried the right click and open as any program. What ever program I choose, that is the icon that appears. No photo. Still no good.
Please help.
Thanking anyone in advance,
Leica

Hi,
Are you using Windows Explorer to view the files?
If so, load Explorer, go to the Tools menu and select Folder Options.
Click on the View tab and make sure the first option (Always show icons, never thumbnails) is not checked.
Click on OK and see if that is any better.
Brian

How can I print just the year view in iCal?

Just trying to print the year view.

If you choose the "list" option in View on the print dialog box and uncheck everything at the bottom except "To do items" you may be able to get what you're looking for. It appears that the list includes all todos including those without due dates, so you might have to do something to assign due dates to all your todos and in iCal preferences restrict the visibility of todos outside of a certain date range. Unfortunately, you can't save any of this work into a standard report (at least not that I know of) - the print dialog in iCal starts from scratch every time you invoke it. Hope that helps at least some.

I create a birthday calendar in iCal and then click on it in iphoto at the begining of the calendar project each year. Some how the birthday did not populate the photo calendar. Is there a way to add the birthday iCal calendar into the calendar project?

I created a birthday calendar to use in iphoto for calendar. When a new calendar project is started each year, I click on it in. Some how the birthday did not populate the photo calendar this year. The photo calendar is almost complete. Is there a way to add the birthday iCal calendar into the calendar project? I would prefer not to start over.

Hi,
If you first select the calendar on the left, so that its background is highlighted blue/grey, when you make a new events they should be added to that calendar.
Best wishes
John M

Am I the Albatross?

Similar Messages

Maybe you are looking for