Am I the only one not able to update my macbook air to os x Yosemite?
Basically I have a early 2014 macbook air that cannot update the software. What can I do?
That is a load of crap.....it has nothing to do with servers being overloaded.....if it is not showing up for anyone to actually attempt to try and download it, then there would be no traffic to overload any servers now would there?
Similar Messages
-
HT201210 Am i the only one not able to do restore because it is saying unable to contact apple
Am i the only one not abe to retore iphone because itunes is unable to contact apple????
Maybe here:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server -
What's going on with the App Store not able to update 2015
What's going on with the App Store not able to update any apps 2015?
Apple is having server problems affecting App Store, iTunes, iCloud, etc…
Check the Apple Service Status(***) page… http://www.apple.com/support/systemstatus/ Wait for all systems to show green.
Here is what Apple's message says…
Multiple Store Services - All users are affected
Customers may be unable to make purchases from the App Store, iTunes Store,
iBooks Store, or Mac App Store.
iCloud Mail - All users were affected
Users may have been unable to access iCloud mail.
iCloud Account & Sign In - All users were affected
Users may have been unable to sign in.
This means no downloads, updates, iCloud and other issues. You may get pop-up windows asking you for password for iCloud, etc…
Try again after it's all green on status page. -
The u, j, m and 7 keys on the keyboard are not functioning properly on my macbook air. Please Help!
The u, j, m and 7 keys on the keyboard are not functioning properly on my macbook air. In its place are a random assortment of keys (Ex - u = "eqrw" or "IOUY"). This randomly happened when logging back in after sleep mode. No liquid damage at all. Please help!
OK, I fixed the problem by doing a SMC (System Management Controller) reset as follows:
1. Powered off my MacBook and removed everything connected except for the power chord.
2. When powered off, I held "Shift" + "ctrl" + "Option" + "Power button" for 5 seconds or so until the little light on the front started to blink rapidly.
3. Powered up my Mac, which took a little longer than usual to start and tested the "missing" keys which now works perfectly again.
Just added another couple of years usage with my aging mac :-) -
Please help!
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter "BOOT_TIME" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Note the timestamps of the BOOT_TIME log messages, which refer to the times when the system was started. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged before the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
For example, if the system was unresponsive or was failing to shut down for three minutes before you forced a restart, post the messages timestamped within three minutes before the boot time, not after. Please include the BOOT_TIME message at the end of the log extract—not at the beginning.
If there are long runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Some private information, such as your name, may appear in the log. Anonymize before posting.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A crash report has a name that begins with the name of the crashed process and ends in ".crash". A panic report has a name that begins with "Kernel" and ends in ".panic". A shutdown stall report has a name that ends in ".shutdownstall". Select the most recent of each, if any. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot. It's possible that none of these reports exists.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash or panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful. -
Hello,
I have recently updated my mac book air to OS X Yosemite. Now my mac book air does not connect with my HP Laserjet 1300 printer. Can you please tell me what to do to solve this problem?
Thank you very much.Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post other kinds of diagnostic report — they're very long and not helpful. -
Of nine mail acct .mac the only one not downloading
I have nine e-mail accts set up in Mail. They have been working just fine for months. Two days ago .mac mail stopped downloading. If I'm in mail, on the list of mail boxes it says there are X number of new e-mails in the .mac acct but they do not show up in the program. Example: 3 new messages in acct one, 4 new messages in acct two, 5 new messages in .mac ... but all I see is the new messages in acct one and two. If I then use safari and log in to my .mac acct there are the 5 new messages. I am not getting any error messages at all. Anybody know why .mac has suddenly stopped downloading to Mail?
Thanks
LeighI'm not sure exactly what could be going on, but a point of clarification. You click the triangle next to Inbox so you can see the various inboxes of all the 9 accounts. You click on the one for .Mac that says it has 5 new messages. Is there anything showing up to the right? You can still see read messages? If you read the unread messages through webmail, does Mail stop telling you there are new messages? If so, do they appear in Mail as read messages at that point? This might help narrow down the problem, anyway.
Oh, do you have your .Mac account set up as POP or IMAP? -
Can someone help me updating my ipad? is still running on version 4.3.3, i have deleted all its content I have restore to original settings and still cant update.
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
Cheers, Tom -
I am getting the message that my email password and/or username is not correct. They are both correct! I am the only one who cannot send or receive emails...I am the only one using a mac. i use mac mail and it is my companies server. I took my computer and iPhone to the Apple store...4 hours later they said that couldn't figure out why it wasn't working. Any suggestions???? I am also not able to log into the C-Panel...
Same here! Happened yesterday to me on New iPad and iPhone 4S. On iPad I managed to correct it by removing the account and activating it again as an Exchange account...I have mail and calendar OK!
On the iPhone nothing seems to work!
Facts:
1. everything worked perfectly for years!
2. I have the 2-step authentication deactivated on my google account so it cannot be this one.
3. On desktop everything works just fine, on iPad everything is OK with Exchange account added (after Google removed support for Exchange account access I CAN ONLY HAVE ONE DEVICE with Google Exchange account, so doing the same on the iPhone does not work!)
4. Tried to remove and add the account again - no results.
5. Tried to remove and add as Google, as Exchange, as Other account - I get calendar but no mail!!!
6. Tried to reboot between remove/add accounts - no results.
7. Tried to ("reset settings") reset the device - no results.
8. Tried to add as POP account and I it worked - I get mail but I do not need POP as I am using zounds of mail with labels and need to be working on an IMAP account
9. To make things even more complicated...I have another account which works perfectly!!!!!
Anyone out there having a clue? -
My IPad 2, IPhone 3GS ans iPod no longer work with apple TV, I have 2 apple TV in my house and for he last 3 weeks the iPod was the only one we could use for appleTV now none of them works, the apple TV icon does not show up any more. Re-started everything.
Ok thank you so much, for your timely response.
RESPONSES:
1) When I set up my iMac, I did not transfer any data directly from my windows PC. I simply used the same iTunes login and account. I have access to all of the files via the "Purchased" section of the iTunes store. If I click "Download Previous Purchases" text, I can download ALL of the purchases I have ever made.
2) I have the Apple TV 2, so good news, question answered. I thought maybe it was the Apple TV 1, but it is the Black model, so bam. Good response for you. Well the whole damned reply is an awesome response, just pointing out that one piece of awesome. I stated that it was an Apple TV 2, and yet you were still good enough to figure I could be mistaken, and provide me with knowleedge just incase.
QUESTIONS:
3) So can my iMac not stream the data directly from itunes, without download? Apple TV can, but perhaps that is something among many things that maker it unique, and awesome.
SERIOUSLY.... THANK YOU...
I work in the computer support section for the Military. The only problem is we use Windows , lol. Well that and i've been gone for nearly 6 months on recover. I go back next month though I hope. But working in that field gives me the abilty to judge responses that run inside the same vein. Your response was so awesome that I half thought I might have written it myself. -
My texts have stoipped getting through to one of my contacts. I can phone him and I can receive his calls and messages. I am the only one of his contacts whose texts are not getting through. We have both restarted our iphones but the problem continues.
Have you talked to your carrier (or your friend to his)? Could be an issue at their end.
-
i have updated my ipad yestarday sicne then i am not able to open any application on my ipad2. some of the application able to open in the page and not able to open all the applications in the second page. Does any one got this type of issue? any suggestions?
This problem has been reported a few times. The solution is to install any new App say a free one. This seems to fix whatever has gone wrong.
-
IMAP every 15 minutes not reliable - Am I the only one?
I had the problem since 1.1.2 (on an unhacked T-Mobile Germany iPhone) and it seems to get worse with 1.1.3.
Pulling mails using IMAP from my .mac account works for an hour or some hours then it stops to pull mails every 15 minutes. When I manually start the mail program it loads all mails. So my settings are correct. When I reboot my iPhone the problem is gone for a while but then comes back. Am I the only one because I read no other post with this specific problem.
Deleting and recreating the mailbox on the phone did not help (and I found out that deleting a mailbox from the phone does NOT delete all information from the phone, a cache of the IMAP messages is still kept). Even a full recovery (including restore from backup) on the phone did not help.I solved the problem now this way:
- Did a complete reset of the iPhone and
- I did NOT restore from a previous backup.
Instead I entered all my settings manual again, like IMAP Servers, all phone settings etc.
For now the problem is gone. Works reliable for a week or so. Knocking on wood... -
A message cannot be seen on my incoming emails. I can only view the message if I click on reply. Also any links attached to email will not open. I have tried everything to solve the problem but not able to.
Try closing the Mail app completely and see if it works properly when you re-open the app : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
HT201272 wait just to be sure i am not the only one who has the "term and conditions" problem
wait just to be sure i am not the only one who has the "term and conditions" problem
Go to Crucial.com and use one of their two methods to determine what upgrades are available for your Mac:
I would purchase the modules from Crucial as they are very reliable and wiill work with you if you have problems.
OT
Maybe you are looking for
-
How to set the number of sockets for batch processing at runtime?
Hello all, I need to change the execution model at runtime. I have achieved this by setting the 'ModelPath' property of the sequence file at runtime. When I set the sequence file model as batchmodel, i need to set the number of test sockets also dyna
-
Excel 2010 - Userform - VBA How to stop 'Job No' from duplicating itself on next empty row
Hi there Thank you in advance for taking the time to check this out. Objective: To prevent duplication of incident numbers in the datasheet, and format the job number with a prefix of Inc- at the beginning. I currently have the cell customization
-
How can I get Siri to not see some iCal calendars?
When I ask to see my calendar, Siri shows calendars that I want to supress. I have some iCal calendars with misc info (warranties, medicines, etc.) that I turn off in iCal, off on the phone calendar. But Siri shows me (for ex: "19 meetings"" when I a
-
Multiple version of same package being distributed
Hello, So i have a package ABC being distributed to site 01. When I check the sender log it is showing it is distributing multiple version of ABC. is this possible? Should it not distribute latest version only? In process sending SWD package ABC ver
-
Hi, I work at a public library - we now have at least three customers affected by the issue where ADE quits unexpectedly after a .acsm file is opened and during the fulfillment stage. All three customers are using Mac OS 10.10.2. One person is using