Am i totally ruined? (regarding my screen)

Ok so i had my Macbook Pro in my bag in its case along with a charger which was also in my bag. I take my usual route on the bus to college and when i get in there is a dent in the aluminium shell of the laptop which was caused by the plug. The plug pins are now bent out of place but that is the least of my worries at the moment. My screen has vertical lines all the way down the section where the dents are. I need to know whether i am covered by Apple Care, and if not, how much a replacement screen would be. Also whether it is possible that the connection has just been lost because there are no leaks or anything that is obviously cracked.
Here are some images of my screen:
http://img186.imageshack.us/img186/5047/img4289.jpg
http://img408.imageshack.us/img408/5217/img4288.jpg
Many Thanks

Hi, Nayrdesigns. No, accidental damage of the kind your MBP has suffered won't be covered by AppleCare, so you'll be on your own to pay for the (very costly) repair. You need to get a better carrying case and/or avoid crushing your AC adapter against the middle of your display back panel.

Similar Messages

How to get the Grand Total in Module pool Screen

Hi Frds.
     How to get the Grand Total in Module pool Screen
Example i have 10 different materials
for each matarial has different moving . But in my case matarials is doesnt matter here
10 material Moving Average price to do Frand total and display in one column...
Please Help me out Frds.
Regards,
Kabil

Hi
You need to calculate the total in a module of PAI (or PBO) event:
PROCESS PAI.
   LOOP.....
   ENDLOOP.
MODULE CALCULATE_TOTAL.
MODULE CALCULATE_TOTAL.
    GRAND_TOTAL = 0.
     LOOP AT ITAB,
        GRAND_TOTAL = GRAND_TOTAL + ITAB-PWB.
    ENDLOOP.
ENDMODULE.
In this way the grand total will be calculated as soon as the user presses enter or another command.
You can't insert the calculation in the loop of table control, because this loop runs the visible lines only, so it's better to calculate the total out of those loop,

My iphone 4 the screen was totally blanck like white screen nothing is visible it is in 90 days warranty now i am new delhi

my iphone 4 the screen is totally blank like white screen nothing is visible.replacment done in dadeland mall apple store on 19th of janvaury 2014 this month and it has got 90 days warranty.now i am in new delhi,India.I have called to apple care USA and they have given the toll free number of india they said it a hardware problem and this has to replace only in USA .now i am not going to USA so i would like to request you that please arrange to replace or repair my iphone 4 in apple care centre at new delhi as this iphone has a warranty just they can send the message and apple care people will take care over here as i bought many product from Usa like HP laptop ,sony camera and other things and they have given the international warranty and over here all the sevice centre will take care so why not apple care peoples take care?
i am waiting for your favorable action and reply
thanks
Rajeev Gupta

Please disregard this question. I'll submit a shorter and more direct question. Thanks.

Can you giv me a brief introduction regarding selection screen with one eg:

Hello
can you giv me a brief introduction regarding selection screen with one eg:

Hi Ranjith,
Selection Screens
Selection screens are one of the three types of screen in the R/3 System, along with dialog screens and lists. You use them whenever you want the user to enter either a single value for a field or fields, or to enter selection criteria.
Function
ABAP programs use screens to obtain input from users. The most general type of screen is a dialog screen, which you create using the ABAP Workbench tools Screen Painter and Menu Painter These tools allow you to create screens for data input and output. However, each of these screens requires its own flow logic.
Defining and Calling Selection Screens
You often use screens purely for data input . In these cases, you can use a selection screen. Selection screens provide a standardized user interface in the R/3 System. Users can enter both single values and complex selections. Input parameters are primarily used to control the program flow, while users can enter selection criteria to restrict the amount of data read from the database. You can create and save predefined sets of input values in the ABAP Editor for any selection screen. These are called variants. Texts on the selection screen are stored as language-specific selection texts in the program text elements. If you start an executable report using the SUBMIT statement, the input fields of the selection screen also serve as a data interface.
Defining and Calling Selection Screens
You define selection screens using ABAP statements in a program. Simple statements allow you to create input fields, checkboxes, and radio buttons, and design the screen layout. If you want to create a screen exclusively for data input, you do not need to create it using the normal dialog programming tools. When you create a selection screen, the system automatically assumes the tasks of the Screen Painter and Menu Painter.
The rules for calling and defining selection screens in ABAP programs depend on the program type:
·         Executable program (type 1) without logical database
You can use a single standard selection screen and as many user-defined selection screens as you wish. The standard selection screen is called automatically when you start the program. User-defined selection screens, on the other hand, are called using the CALL SELECTION-SCREEN statement in a program. The standard selection screen always has the screen number 1000. User-defined selection screens can have any screen number except 1000.
·         Executable program (type 1) with logical database
The standard selection screen for an executable program linked to a logical database is made up of the logical database selections and the program selections.
·         Module pools (type M) and function modules (type F)
You can only use user-defined selection screens in module pools and function modules. These can have any number apart from 1000. You can only call a selection screen from a function module using the CALL SELECTION-SCREEN statement. You can also define selection screens as Subscreens and incorporate them in screens or tabstrip controls.
Hope this is useful.
regards
Ram
Message was edited by:
        Ramanujan Chitrakootam

Regarding Safari; (screen goes crazy when I press the Top Sites bottom)

Regarding Safari; When I open safari everything works fine, but when I press the top sites bottom, the screen goes crazy for a second and then goes to the top sites. It is not fading or dimming from one screen to the other like it use to do. any sugestions. Thanks

Nope, it isn't normal, but I don't know the cause. You might have better luck posting in the Safari forum:
https://discussions.apple.com/community/mac_os/safari

Regarding selection screen output

hi,
i have created ALV report by using selection screen.in this i have displayed kunnr field from kna1 table.
but it is showing someextra zero's and then code now i want to display only code not extra zero.here below i am giving example:----
sap code
00001562
but i want like this....
sap code
1562.
thanx/regards,
vaneet thakur

TABLES : VBRK,KNA1.
TYPE-POOLS : SLIS.
DATA : T_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
 L_FIELDCAT TYPE SLIS_FIELDCAT_ALV, "DECLARATION OF FIELDCAT FOR OUTPUT DISPLAY
 T_LAYOUT TYPE SLIS_LAYOUT_ALV.
DATA : BEGIN OF ITAB OCCURS 0,
 VBELN LIKE VBRK-VBELN, "PO NUMBER
 VTEG LIKE VBRK-VTWEG, "DC
 SPART LIKE VBRK-SPART, "DIVISION
 FKDAT LIKE VBRK-FKDAT, "DATE
 KUNRG LIKE VBRK-KUNRG, "CUSTOMER PLANT
 WERKS LIKE VBRK-WAERK, "SITE
 VKORG LIKE VBRK-VKORG, "SALE ORGANIZATION
 NAME1 LIKE KNA1-NAME1,
 ORT01 LIKE KNA1-ORT01,
 END OF ITAB.
SELECTION-SCREEN : BEGIN OF BLOCK VANEET WITH FRAME TITLE TEXT-001.
*SELECT-OPTIONS : SITE FOR VBRK-WAERK.
SELECT-OPTIONS : PCODE FOR VBRK-KUNRG.
*SELECT-OPTIONS : INVOICE FOR VBRK-VBELN.
SELECT-OPTIONS : S_ORG FOR VBRK-VKORG OBLIGATORY.
SELECT-OPTIONS : DC FOR VBRK-VTWEG OBLIGATORY.
SELECT-OPTIONS : DIVISION FOR VBRK-SPART obligatory.
*SELECT-OPTIONS : PO_DATE FOR VBRK-FKDAT.
SELECTION-SCREEN : END OF BLOCK VANEET.
SELECTION-SCREEN : BEGIN OF BLOCK VANEET1 WITH FRAME TITLE TEXT-002.
SELECT-OPTIONS : INVOICE FOR VBRK-VBELN.
SELECT-OPTIONS : PO_DATE FOR VBRK-FKDAT.
SELECTION-SCREEN : END OF BLOCK VANEET1.
*PERFORM TOP-OF-PAGE.
PERFORM FETCH-DATA.
*PERFORM DISP_DATA.
PERFORM T_FIELDCAT.
PERFORM REUSE_ALV.
**& Form TOP-OF-PAGE
 text
--> p1 text
<-- p2 text
*FORM TOP-OF-PAGE .
*FORMAT COLOR 3 INTENSIFIED OFF.
*FORMAT COLOR 5 INTENSIFIED OFF.
*write : /48(120) 'NAHAR RETAIL LTD'.
*FORMAT COLOR 3 INTENSIFIED OFF.
*write : /48(120) 'FOCAL POINT'.
*FORMAT COLOR 6 INTENSIFIED OFF.
*write : /48(120) 'LUDHIANA'.
*write : / sy-uline.
*format color 4.
**WRITE: /1(20) 'INVOICENO',
 25(15) 'SAP CODE',
 55(15) 'PARTYNAME',
 100(50) 'LOCATION'.
 format color 7 INTENSIFIED ON.
*ENDFORM. " TOP-OF-PAGE
*& Form FETCH-DATA
 text
--> p1 text
<-- p2 text
FORM FETCH-DATA .
REFRESH ITAB.
SELECT AVBELN AKUNRG AFKDAT AWAERK BNAME1 BORT01 INTO CORRESPONDING FIELDS OF TABLE ITAB
FROM VBRK AS A INNER JOIN KNA1 AS B
ON AKUNRG = BKUNNR
WHERE
A~VBELN IN INVOICE
and
A~FKDAT IN PO_DATE
and
B~KUNNR IN PCODE
GROUP BY AVBELN AKUNRG BNAME1 BORT01 AFKDAT AWAERK.
SORT ITAB ascending BY VBELN.
*ENDSELECT.
ENDFORM. " FETCH-DATA
**& Form DISP_DATA
 text
--> p1 text
<-- p2 text
*FORM DISP_DATA .
*loop at itab.
*write :/1(18) itab-VBELN,
 27(5) ITAB-KUNRG,
 55(25) ITAB-NAME1,
 100(50) ITAB-ORT01.
*endloop.
*ENDFORM. " DISP_DATA
*& Form T_FIELDCAT
 text
--> p1 text
<-- p2 text
FORM T_FIELDCAT .
PERFORM fill_field USING 'VBELN' 'PO NO'.
PERFORM fill_field USING 'KUNRG' 'CUSTOMER PLANT'.
PERFORM fill_field USING 'NAME1' 'PARTY NAME'.
PERFORM fill_field USING 'ORT01' 'LOCATION'.
PERFORM fill_field USING 'BASME' 'UOM'.
PERFORM SELECTION_WIDTH.
ENDFORM. " T_FIELDCAT
*& Form fill_field
 text
 -->P_0267 text
 -->P_0268 text
FORM fill_field USING p_fieldname
 p_seltext.
L_FIELDCAT-FIELDNAME = p_fieldname.
L_FIELDCAT-TABNAME = 'ITAB'.
L_FIELDCAT-SELTEXT_M = p_seltext.
L_FIELDCAT-OUTPUTLEN = 10.
APPEND L_FIELDCAT TO T_FIELDCAT.
CLEAR L_FIELDCAT.
ENDFORM. " fill_field
*& Form REUSE_ALV
 text
--> p1 text
<-- p2 text
FORM REUSE_ALV .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = ' '
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
 IS_LAYOUT = T_LAYOUT
 IT_FIELDCAT = T_FIELDCAT
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
 T_OUTTAB = ITAB
EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " REUSE_ALV
*& Form SELECTION_WIDTH
 text
--> p1 text
<-- p2 text
FORM SELECTION_WIDTH .
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
 INPUT = itab-kunrg
IMPORTING
 OUTPUT = itab-kunrg

Regarding Selection-Screen Field Display

Hi All,
I have issues with Selection-Screen field display.
The Actual issue is i had declared a selection screen field as: s_exgen FOR embk-exgen.
EMBK-EXGEN is actually 20 Char length field.
But in output display it is being shown as 18 Char field though i can type in all 20 characters.
But display restricted to 18 Characters only.
Can anybody give me the solution for the same!
Thanks in advance.
Thanks & Regards,
Prasad.

Hi,
You can decrease the visible length of the field but you can not increase more than database field length. check SAP help on this :
select-options: s_exgen FOR embk-exgen VISIBLE LENGTH 5.
... VISIBLE LENGTH vlen
Effect
This addition allows you to shorten the visible length of the corresponding screen field on the selection screen to vlen.
Variant 2
SELECT-OPTIONS sel FOR (f).
Additions as in variant 1.
Effect
In this variant, (f) must be a field containing the name of the actual reference field at runtime. The system creates the LOW and HIGH fields as character fields with length 45. However, their appearance on the selection screen is inherited from the reference field whose name is contained in field f at runtime.
Regards
Appana

Query regarding selection screen

Hi experts,
I have a requirement that once I get my output on a selection screen, suppose it has just 1 row and 4 columns. If I click on each of these 4 columns, a new transaction/report etc. needs to be called. How can I achieve this functionality?
Thanks,
Ajay.

Hi,
Say you have an internal table with fields as:
VBELN (sales order)
POSNR (sales order line item)
WERKS (plant)
MATNR (matnr)
And you write all these fields on output screen using reporting and when you click on any column field then a particular transaction/report should be called, then follow the below mentioned logic:-
DATA : BEGIN OF it_final OCCURS 0,
 vbeln TYPE vbap-vbeln,
 posnr TYPE vbap-posnr,
 werks TYPE vbap-werks,
 matnr TYPE vbap-matnr,
 END OF it_final.
DATA : fldname(25) TYPE c,
 fldvalue(25) TYPE c.
START-OF-SELECTION.
"select query into it_final internal table
AT LINE-SELECTION.
GET CURSOR FIELD fldname VALUE fldvalue.
CASE fldname.
 WHEN 'IT_FINAL-VBELN'.
 WRITE : / fldvalue.
 "code to call transaction/report
 WHEN 'IT_FINAL-POSNR'.
 WRITE : / fldvalue.
 "code to call transaction/report
 WHEN 'IT_FINAL-WERKS'.
 WRITE : / fldvalue.
 "code to call transaction/report
 WHEN 'IT_FINAL-MATNR'.
 WRITE : / fldvalue.
 "code to call transaction/report
ENDCASE.
END-OF-SELECTION.
ULINE.
FORMAT HOTSPOT.
LOOP AT it_final.
 WRITE : /1 it_final-vbeln, 10 it_final-posnr, 20 it_final-werks, 30 it_final-matnr.
 HIDE : it_final-vbeln, it_final-posnr, it_final-werks, it_final-matnr.
ENDLOOP.
ULINE.
Now to call a transaction user:-
SET PARAMETER ID '<param_id>' FIELD '<field_value>'.
CALL TRANSACTION '<t_code>' AND SKIP FIRST SCREEN.
To call a report use:-
SUBMIT <report_name> WITH <parameter_name1> = <field_value1>
 WITH <parameter_name2> = <field_value2>
 "and so on use parameters
 AND RETURN.
<paramater_name> refer to the parameter of the called report <report_name>
and <field_value> refer to value for the parameter to be passed.
Hope this helps you.
Regards,
Tarun

Regarding the screen problem in 'back' command

Hi Experts,
I am doing project on data scrambling an using the ldb PNP . currently i am facing one problem regarding the' BACK'.
i am calling one screen program in main program. when i am clicking on back button from screen program ,the control flow back to the main program and the rest of the lines of the main program gets executed.
i want the control must go back to the default selection screen.
i have tried using leave to screen 0,leave program and exit.But these command are not working as per the requirement.
thanks in advance.

Hai,
       Please check the fct code for BACK button. if the fctcode is exist then use the following code.
        if sy-ucomm = 'BACK'.       " USE CAPITAL LETTERS ONLY
             LEAVE TO SCREEN 0.

Regarding slection-screen problem

Hi,
I have one requirement in selection-screen.if I enter the period from 04 to 03 with fiscal year from 2006 to 2007 as in put parameters in selection-screen, getting error message as 'From period is greater than To period'.
Can any body please respond to my question..
Regards,
Suresh Kumar.

Say you have the selection fields
SELECTION-SCREEN BEGIN OF BLOCK block
[WITH FRAME [TITLE title]]
[NO INTERVALS].
parameters: per1 fiscyr1 per2 fiscyr2
SELECTION-SCREEN END OF BLOCK block.
SELECTION-SCREEN END OF BLOCK block.
AT SELECTION SCREEN ON BLOCK block.
data: num1 type n, num2 type n.
CONCATENATE fiscyr1 per1 into num1.
CONCATENATE fiscyr1 per1 into num2.
if num1 > num2.
message: from period greater than to period
endif.

Regarding Selection Screen in smartforms

Hi:
I got the following requirement.
I've to make a smartform & do the coding in smartform itself. I'm not sure that how to populate a selection screen. I need to populate a Select-options. Please help me out.

HI,
You can create the Selection screen in a program and call the Smartform function module in the Program and you can pass the Selection screen parameters to the Smartfor, if you create the Fields in FROM INTERFACE in Smartfroms, then that become import paramters in the function module and you can pass the selection screen fields to this paramters
Look at the below link, it is having the Program and the Progam using the select-options also
http://www.erpgenie.com/abap/smartforms.htm
Regards
Sudheer

Regarding Sub Screen Moving problem

Dear All,
I created 9 subscreen and assigned to different tabs.
Each and every sub screen have 3 to 4 text blocks (i.e. Custom Controls).
after moving one tab to another tab scroll the sub screen down , all text blocks also moving with scroll bar.
how to resolve this problem. Due to this problem saving also not working..when text blocks are study text save in ibject id and text id..But when moving saving not happend.
Regards,
Reddy Nara

Hai,
       Please check the fct code for BACK button. if the fctcode is exist then use the following code.
        if sy-ucomm = 'BACK'.       " USE CAPITAL LETTERS ONLY
             LEAVE TO SCREEN 0.

Query regarding selection screen layout

i want to knw how to put a blank line / how to skip a line in selection screen...
like
in Block 1
Presentn filepath
Application filepath
(1 line skipped)
Log filepath
end of block 1

Hi ,
use SELECTION-SCREEN SKIP 2. statement.If u want to skip two lines .
check this code.
selection-screen begin of block B1 with frame title text-d01.
selection-screen SKIP 3.
parameters : p_lifnr type lifnr.
parameters : p_kunnr type kunnr.
parameters : p_count(2) type n.
selection-screen SKIP 3.
selection-screen end of block B1.
regards
reena

Regarding selction screen values

Hi ,
In my report there are two parameter
1. country
2.airport code
when i enetred country , then the airport will display the corresponding airports and description only,
there is a table where i get the country , airports and descriptions,
Please suggest how to solve this
regards,
krishna

Hi,
as per my understanding you have to provide the F4 help for airport based on the country code entered, if my guess is correct follow the below procedure.
write the code in "at selection-screen on value-request for airport"
1) use the function module "DYNP_VALUES_READ" function module to capture the country entered on the selection screen.
2) select the airports based on the country code entered.
3) us the function moduel "F4IF_INT_TABLE_VALUE_REQUEST" to display the airport list in list of possible window.
Refer the below code you will understand.
here i am taking material and material description, based on the entered material i am fetching the material description on F4 help.
TABLES: mara.
DATA:
     BEGIN OF x_matnr OCCURS 0,
           matnr LIKE mara-matnr,
           maktx like makt-maktx,
     END   OF x_matnr.
DATA:
     l_dynprofld      TYPE help_info-dynprofld,
     l_matnr(7) TYPE c VALUE 'P_MATNR',
     l_prog     TYPE sy-repid,
     l_dynnr    TYPE sy-dynnr.
PARAMETERS: p_matnr LIKE mara-matnr,
            p_maktx like makt-maktx.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_maktx.
   PERFORM f_get_values.
FORM f_get_values.
DATA: i_return LIKE ddshretval OCCURS 0,
      i_dynpfields like DYNPREAD occurs 0 with header line,
      l_repid like sy-repid.
      l_repid = sy-repid.
      i_dynpfields-fieldname = 'P_MATNR'.
      APPEND I_DYNPFIELDS.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname   = l_repid
      dynumb   = '1000'
    tables
      dynpfields = i_dynpfields .
IF sy-subrc = 0.
     READ TABLE I_DYNPfields INDEX 1.
     IF SY-SUBRC = 0.
        CALL FUNCTION 'CONVERSION_EXIT_MATN2_INPUT'
          EXPORTING
            input    = I_DYNPfields-FIELDVALUE
         IMPORTING
           OUTPUT    = I_DYNPfields-FIELDVALUE.
        select matnr maktx from makt into table x_matnr
               where matnr = I_DYNPfields-FIELDVALUE.
     ENDIF.
ENDIF.
IF NOT X_MATNR[] IS INITIAL.
l_prog = sy-repid.
l_dynnr = sy-dynnr.
l_dynprofld = l_matnr.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
    retfield               = 'MAKTX'
   dynpprog               = l_prog
   dynpnr                 = l_dynnr
   dynprofield            = l_dynprofld
   value_org              = 'S'
TABLES
    value_tab              = x_matnr
   return_tab             = i_return.
IF sy-subrc NE 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
ENDFORM.                    " F_GET_VALUES
Reward if useful.
Thanks,
Sreeram.
Edited by: Sreeram Prasad on Jan 3, 2008 11:38 AM
Edited by: Sreeram Prasad on Jan 3, 2008 11:39 AM

Regarding RF screen

Hi,
Can u please give an idea about RF Screen. Am new to it.
Regards,
Vijay.

hi
good
Most corporations who implement an ERP system are confronted with the issue of how to simplify and streamline the logistics process utilizing radio frequency (RF) technology. For SAP R/3® users in particular, this issue has always been addressed by selecting and implementing a 3rd party RF Middleware system. Since SAP did not offer any type of RF solution, this became the only choice. In the latter part of 1999, SAP quietly introduced a product named SAPConsole to finally address the issue of supporting character-based RF devices from SAP R/3. The question that now needs to be answered is, What is SAPConsole and will it work for my application.
This guide will clear up the mystery about SAPConsole and describe the benefits and limitations when evaluating an SAPConsole Approach to RF Data Collection.
For RF SAPConsole to work companies will need, along with the SAPConsole implementation, to also implement a WLAN network using the appropriate technology, frequency, compatibility and so on. The SAPConsole consultant should be able to provide advice on this.
History of SAP Console
Several years ago SAP partnered and subsequently purchased OFEK-tech, an Israeli company specializing in Warehouse Management and Control. As SAP OFEK-tech, one of the main objectives of this new partnership was to develop native support for radio frequency (RF) devices for the SAP R/3 Warehouse Management Module.
Parallel to the OFEK-tech effort, SAP initiated a new more comprehensive Warehouse Management systems strategy starting with R/3 version 4.5 known collectively as the Logistics Execution System (LES). LES integrates the applications of Warehouse Management, Shipping and Transportation, and can operate in an integrated mode similar to all the other modules (MM, PP, etc.) or as a stand-alone system (Decentralized WM).
These two initiatives finally came together starting with LES in version 4.6B. The new RF solution for LES offers several new Mobile Data Entry transactions specifically designed for RF users and the supporting operations. This whole suite of functionality including business transactions, configuration, and RF device support is sometimes mistakenly referred to as SAPConsole, since it was first released with version 4.6B. Technically, it is more correct to call this RF solution the SAPConsole Approach.
thanks
mrutyun^

Am i totally ruined? (regarding my screen)

Similar Messages

Maybe you are looking for