Am looking for driver to install HP All in one 2050 for window 7

please install my printer into this computer!

Hi @sentichris, and thanks for reaching out to the HP Forums! I can happily help you install your Deskjet 2050.
You can either install the full feature software with the link below, or you can use the HP Printer Install Wizard for Windows
The HP Printer Install Wizard for Window was created to help Windows 7, Windows 8, and Windows 8.1 users download and install the latest and most appropriate HP software solution for their HP Printer.
DJ2050_J510_1313-1.exe
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Similar Messages

Problems Installing J4680C all in one

I'm having problems installing the all in one for my j4680c. I'm getting a fatal error message. I'm runningWindows 7 64 bit.
This is the screenshot I took:

Hi @Mezron,
I see that you are experiencing issues installing the printer software. You are getting a fatal error message. Thank you for providing the screen shot of the error message. I will certainly do my best to help you.
Please download and save the latest drivers if you haven't already. HP Officejet Full Feature Software and Driver.
Turn off the Antivirus Software and the Real Time Scanning if your Antivirus Software has this feature. It can affect the full software from being installed.
Here is a example using McAffee Security Center.
Disable Real-Time Scanning and the Firewall:
Open your McAfee product located down by your clock and right click the M.
Click Navigation and select Real-Time Scanning .
Click Turn Off .
Click Navigation and select Firewall .
Click Turn Off .
Return to the main product window and verify that Real-Time Scanning and the Firewall remain off.
Close your McAfee product. The status should show that you are not protected.
Then follow this document to register Windows components, msconfig and reinstall the printer software again.
Fatal Error 'Error 1603. A fatal error occurred during installation' (MSI Error 1603) Displays Durin...
If you have any further issues, check this document out for A 'Fatal Error' (MSI error) Displays on the Computer During HP Software Installation in Windows.
Please provide in detail the results if you are still having issues.
Have a wonderful day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Unable to install hp all in one officejet x64 drivers windows 8 it

unable to install hp all in one officejet x64 drivers windows 8 64 bit from hp website the select all button is not working.

Hello louvallee,
If you had upgraded you PC OS to win 8.1 and if you were able print with the prior OS, then you may have to first uninstall the existing printer software and try step#
Else
1) Please download and run the HP Printer Install Wizard from www.hp.com/go/tools
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

Fail with quickstart with fresh install the All-in-one Installer

Hi all,
I install the quick install with all-in-one installer, and start the Endeca Server from program menu, and then I can get to the http://localhost:8080, and login successfully.
Then I start the Integrator, open the quickstart project, but when I try to run the Baseline.grf it get fail with:
IERROR [WatchDog] - Graph execution finished with error
ERROR [WatchDog] - Node WEB_SERVICE_CLIENT0 finished with status: ERROR caused by: org.apache.axis2.AxisFault: Read timed out
ERROR [WatchDog] - Node WEB_SERVICE_CLIENT0 error details:
com.opensys.cloveretl.component.ws.exception.SendingMessegeException: org.apache.axis2.AxisFault: Read timed out
     at com.opensys.cloveretl.component.ws.proxy.b.b(Unknown Source)
     at com.opensys.cloveretl.component.ws.proxy.b.a(Unknown Source)
     at com.opensys.cloveretl.component.WebServiceClient.a(Unknown Source)
     at com.opensys.cloveretl.component.WebServiceClient.execute(Unknown Source)
     at org.jetel.graph.Node.run(Node.java:414)
     at java.lang.Thread.run(Thread.java:619)
Caused by: org.apache.axis2.AxisFault: Read timed out
     at org.apache.axis2.AxisFault.makeFault(AxisFault.java:430)
     at org.apache.axis2.transport.http.HTTPSender.sendViaPost(HTTPSender.java:193)
     at org.apache.axis2.transport.http.HTTPSender.send(HTTPSender.java:75)
     at org.apache.axis2.transport.http.CommonsHTTPTransportSender.writeMessageWithCommons(CommonsHTTPTransportSender.java:389)
     at org.apache.axis2.transport.http.CommonsHTTPTransportSender.invoke(CommonsHTTPTransportSender.java:222)
     at org.apache.axis2.engine.AxisEngine.send(AxisEngine.java:435)
     at org.apache.axis2.description.OutInAxisOperationClient.send(OutInAxisOperation.java:402)
     at org.apache.axis2.description.OutInAxisOperationClient$NonBlockingInvocationWorker.run(OutInAxisOperation.java:442)
     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
     ... 1 more
Caused by: java.net.SocketTimeoutException: Read timed out
     at java.net.SocketInputStream.socketRead0(Native Method)
     at java.net.SocketInputStream.read(SocketInputStream.java:129)
     at java.io.BufferedInputStream.fill(BufferedInputStream.java:218)
     at java.io.BufferedInputStream.read(BufferedInputStream.java:237)
     at org.apache.commons.httpclient.HttpParser.readRawLine(HttpParser.java:78)
     at org.apache.commons.httpclient.HttpParser.readLine(HttpParser.java:106)
     at org.apache.commons.httpclient.HttpConnection.readLine(HttpConnection.java:1116)
     at org.apache.commons.httpclient.MultiThreadedHttpConnectionManager$HttpConnectionAdapter.readLine(MultiThreadedHttpConnectionManager.java:1413)
     at org.apache.commons.httpclient.HttpMethodBase.readStatusLine(HttpMethodBase.java:1973)
     at org.apache.commons.httpclient.HttpMethodBase.readResponse(HttpMethodBase.java:1735)
     at org.apache.commons.httpclient.HttpMethodBase.execute(HttpMethodBase.java:1098)
     at org.apache.commons.httpclient.HttpMethodDirector.executeWithRetry(HttpMethodDirector.java:398)
     at org.apache.commons.httpclient.HttpMethodDirector.executeMethod(HttpMethodDirector.java:171)
     at org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:397)
     at org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:346)
     at org.apache.axis2.transport.http.AbstractHTTPSender.executeMethod(AbstractHTTPSender.java:550)
     at org.apache.axis2.transport.http.HTTPSender.sendViaPost(HTTPSender.java:189)
     ... 9 more
INFO [WatchDog] - [Clover] Post-execute phase finalization: 0
INFO [WatchDog] - [Clover] phase: 0 post-execute finalization successfully.
INFO [WatchDog] - Execution of phase [0] finished with error - elapsed time(sec): 600
ERROR [WatchDog] - !!! Phase finished with error - stopping graph run !!!
INFO [WatchDog] - -----------------------** Summary of Phases execution **---------------------
INFO [WatchDog] - Phase# Finished Status RunTime(sec) MemoryAllocation(KB)
INFO [WatchDog] - 0 ERROR 600 16351
INFO [WatchDog] - ------------------------------** End of Summary **---------------------------
INFO [WatchDog] - WatchDog thread finished - total execution time: 600 (sec)
INFO [main] - Freeing graph resources.
ERROR [main] - Execution of graph failed !
and the start Endeca Server window is stop on Starting
2012-12-14 22:09:48.043:INFO:oejs.AbstractConnector:Started SelectChannelConnect
[email protected]:7770 STARTING
Any help is really appreciate.
Thanks,
Jason.

Baseline.grf is not able to connect to Endeca Server. Make sure Endeca Server has started correctly and then run baseline.grf graph.
Regards,
Srikanth

Looking for Windows files on a Mac

On my Macbook Pro OS X 10.9.4 Processor 2.7 GHz Intel Core i7 Memory 16 GB 1600 MHz DDR 3 when starting a existing project I get a message about a file the program is not able to load.
So it asks me to point the location. The question is as follows: Where is the file 'C:\Program Files\Adobe\Premiers Pro 1.5\Presets\Textures\Business Title_7.tga'?
I'm using a Mac and when I search for the file it's not on my computer.
It's looking for a file in a curtain folder.
Could you give an advise what to do?

Hello A.T. Romano,
I’m using Adobe Premiere Elements 12
Version 12.1 (20140225.12.1.620828)
I get the message when opening an already made project in which I added a Title.
In the ones without a title I don’t get the message.
So it is something connected to the use of titles.
I used RedBulbs as a title.
When I click ‚Skip’ or Offline my project opens correctly and I don’t miss any media. Even the title part is OK.
I hope this describes the problem enough and hopefully you can give me some advise.
Best regards,
Rob de Ridder
Op 6 sep. 2014, om 17:30 heeft A.T. Romano <[email protected]> het volgende geschreven:
Looking for Windows files on a Mac
created by A.T. Romano in Premiere Elements - View the full discussion
AquaRidder
What version of Premiere Elements are you using on your Mac computer?
Do you ever get this
Where is the file 'C:\Program Files\Adobe\Premiers Pro 1.5\Presets\Textures\Business Title_7.tga'?
when you open a new project or do you get this message only when you go to open an existing project?
If only for existing projects, then please tell us if this existing project was created with title templates and/or Instant Movie themes.
If so please detail.
If you click "Skip" to the "Where is the file....?" message, does your project open without problem? And if so, do you see any missing media
displays in the workspace? And if so where?
We will be watching for your follow up.
Thanks.
ATR
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6706396#6706396
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Can I update free to Windows 10 from my Aspire ZC-102 All in One desktop from Windows 8.1?

Can I update free to Windows 10 from my Aspire ZC-102 All in One desktop from Windows 8.1?I bought my ACER with Windows 8 on it a year ago thru HSN. Then I upgraded to 8.1 using the Store thing on the computer. I've not been a fan of 8 or 8.1. I'm told that Windows 10 comes out on Friday and that upgrades are free somehow. Maybe that's thru doing the beta testing that I've read about. I don't know. But I'm not in very good shape financially and my computer's operating system is going nuts on me so an upgrade would probably fix things pretty well.
I'd tried to do a Repair Install of 8.1 but was somehow told that since I'd upgraded from 8, a Repair Install couldn't be done thru the Control Panel. I'm clueless and I'm hurting. Can I have some help please?

Thanks. I see that white icon down by the clock that hovered says GET WINDOWS 10. So even though I downloaded Windows 10 yesterday and burned it into being a bootable DVD, I went ahead and just Reserved My Upgrade since the DVD hasn't been cooperating.When I stuck it in and hit any key as the ACER started, it brought me to a screen that I couldn't figure out what to do on. I was clueless and I didn't want to cause myself any grief by just trying anything. I did just backup my28+ GB of Photos, Docs, Desktop, Downloads & Music.
But I don't want to accidentally do a clean install, which I've done before on my XP Tablet pc and that sure isn't any fun for a novice like me.
I only use Office 2013 and an old Paint Shop Pro 6.0 which is really old and isn't their newer v6 so it has to run in Compatibility Mode in 8.1. I'm not an APP guy either. I do use OmniPass software for passwords so I can Save and Restore them if needed, so I had to buy a 64 bit version of that to run on this ACER.
So I guess my next step is to just wait for a Notification from Microsoft that I can now switch to 10 which I think it said will just download so my DVD won't even be needed for anything but as a repair tool.That icon you told me about brought up a screen and on it it said that it found my PC to be compatible with Windows 10. So does that mean that drivers and everything ACER will work as they should or will I need to get anything off the ACER site to make my PC work with Windows 10?

FRUSTRATED - windows 7 64 bit driver HP 6500 709e all in one won't install on 2 computers

Hi,
My son and I both got new laptops for Christmas. I have had nothing but problems installing our wireless printer with its full features. My son's computer is a Dell, mine is a Toshiba. From what I could find both needed the same driver but both have had MAJOR issues getting the install to complete and installing the device. Somehow I was able to get it installed on my Toshiba but the "fix" I used didn't work on the Dell. PLEASE HELP! Thanks
Carol
Sorry I realized I did add much information. The printer is the 6500 all in one deskjet 709e. I have tried installing the 64 bit, windows 7...i also downloaded the update. Eventually it worked for my Toshiba laptop but still can't get it to install on my son's dell.
After numerous tries,
I downloaded the driver for windows 7, 64 bit driver and then downloaded the update. The driver/software wouldn't install the device until I did the update (for my Toshiba) but this is not working for the Dell. Also I did download the troubleshooter and it was useless!

Welcome to the HP Forums Zoney,
I read your post which indicates that you are getting a "MICROSOFT VISUAL C ++RUNTIME LIBRARY" error, when trying to install the printer software. I can help you with this.
Download and install this Patch> Microsoft Visual C++ Runtime Error.
Uninstall the printer software.
Before installing the printer software again, setup the Admin rights on the computer.
Run Command Prompt as Administrator. Go to the start menu, type “CMD” in the search bar. Now, you should see a shortcut for CMD above. Right click on it, and click “run as administrator”. If it asks you for administrative permission, please allow permission. In your Command Prompt window (as administrator), type the following and hit Enter: net user administrator /active:yes
You should see a message saying "the command completed successfully". After troubleshooting is done, you can disable this account by typing the following command into Command Prompt (as administrator): net user administrator /active:no.
Restart the computer, and utilize the new account that is available, which should be named "Administrator".
Here are some more steps you can try if you are still getting the Runtime error.
But it is looking more like a Operating System issue.
Download and install the Microsoft Visual C++ 2010, 2008 and 2005 Redistributable Packages.
You will find the download links to these packages below:
2005 - http://www.microsoft.com/en-ca/download/details.aspx?id=26347
2008 - http://www.microsoft.com/en-ca/download/details.aspx?id=5582
2010 - http://www.microsoft.com/en-us/download/details.aspx?id=14632
Try the installation again please.
Let me know how you make out.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Driver HP Deskjet F2200 All-in-One for Windows 98

Hello!
I have printer HP Deskjet F2200 All-in-On and I need driver for Windows 98. Where I can find this driver? If is not it present, is it possible to do something?
Thank you

Hi,
lick Start ( ), and then click Control Panel .
Double-click Add/Remove Programs . In the list of installed programs, click your HP printer, and then click Add/Remove .
Follow the on-screen instructions to complete the software and select the printer Deskjet 990C and complete the installation. Since we don't have Wind 98 software for the printer any more
I work for HP but my posts and replies are my own.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

Scanner Driver/Sofware for HP 1315 All in One on a Windows 8.1 system

Since I've up grade to a new computer with Windows 8, life has been VERY hard on on my HP 1315 All in One. I've final found the pritner driver but the scanner is not functioning - Where do I find a driver/software download.
Don't tell me a need a new scanner.

Hey there @SierraGulf ,
I just noticed your post and wanted to link you to the drivers and software download page for your PSC 1315 on Windows 8.
Here you are: HP Deskjet and Officejet Full Feature Software and Drivers
Best wishes
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Mac Mini stuck looking for Windows Boot Disk! Please help

Hi all, I've been running Leopard on my Mac Mini off a FireWire hard drive enclosure. The 750gb hard drive in the enclosure is a drive I used to have in my old iMac.
When I had my iMac I'd installed Windows via Bootcamp. So when running, the Mac Mini would show a Windows partition on the Leopard desktop. Today I needed to do something in Windows. so I went to Sys Prefs > Startup Disk and chose to reboot into that Windows partition. BIG MISTAKE
Now whenever I turn the Mini on it looks for a Windows partition and tells me it can't find one. I've tried resetting the PMU, booting from Leopard DVD, holding Option, nothing works. The only thing that will work is if I put a Windows XP disk in and it will try and take me through the install process.
How on earth do I get my Mac back booting into Leopard!?
Message was edited by: Thomas Robinson

I can't believe it was just the new Apple thin Alu Keyboard causing it! Plugged in an old Apple USB one and I got the Option startup menu straight away, totally bizarre!

Trying to install multiple All in One Printers on new laptop

Got a new HP Envy laptop running Windows 8.1. Replacing old HP running XP. Trying to install two HP All in One printers on my home wireless network HP 6500 E709n and a HP 7410. I am stuck in an infinte loop using the HP Print and Scan Doctor. I load up one printer Driver using the downloads on the website. When I go to load the other printer, the system won't let me continue until I uninstall the previous printer driver and accessy software.
Anyone know how to get around it?

Hello again,
Thanks for getting back to me!
Next, I would suggest uninstalling all of the printer software on your computer, performing a clean boot and then reinstalling the OJ 7410 first and then the OJ 6500. Here are the steps and links in order for you.
Uninstalling the Printer Software
Restart the PC
How to perform a clean boot in Windows
Restart the PC
Download and Install - HP Officejet 7410 All-in-One Printer
Download and Install - HP Officejet 6500 Wireless All-in-One Printer - E709n
I hope this works for you!
Happy Wednesday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Install F380 ALL IN ONE

Hi I have a HP DESKJET F380 ALL IN ONE THAT IS SAY IS NOT COMPARABLE WHIT MY DELL WINDO VISTA. HELP
Message Edited by sirena on 12-31-2008 07:14 AM

Hello shrijoshi,
I see that you're getting a runtime error when you are trying to install the HP Deskjet F380 on your Windows 7 (64 bit) machine. Please follow the steps listed below:
Hold down the Windows Logo key ( ) on the keyboard and the 'R' to open the run box, type %temp%
Look for, and open the folder starting with 7z (Example: 7zS2356)
Open folder Util
Open folder CCC
If you have an HP computer run the L3uninstall.exe . If you have a non-HP computer run the L4uninstall.exe
When the uninstall has completed restart the computer
Follow these steps to reset the registry settings and options for Windows Installer.
Click Start , and then click Run .
In the Open box, type msiexec /unreg, and then click OK .
Click Start , and then click Run .
In the Open box, type msiexec /regserver, and then click OK
Run Disk cleanup from Accessories\ System Tools
Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayer/downloads .html
Now we can restart the computer
I would now like you to install the software using the HP Printer Install Wizard it was created to help Windows 7, Windows 8, and Windows 8.1 users download and install the latest and most appropriate HP software solution for their HP Printer
Your HP F380 should now be successfully installed, if you run into any problems please let me know.
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Dell XPS One 27 All In One Desktop PC Windows 10 Graphics Driver Issues

I am posting to let Dell know about a problem with the current Dell XPS One 27 all in one desktop PC running the technical preview of Windows 10. The XPS 27 uses a NVidia mobile graphics card that utilizes the 750M graphics chipset. Dell publishes a compatible driver on its support pages (Driver 331.82). This driver works on Windows 10 technical preview builds 9962 and 10041, however the Windows Update feature in Windows 10 technical preview forces driver updates. The one being forced by Windows Update (Driver 349.90) is not 100% compatible with the hardware in the XPS 27.
When the XPS 27 is running driver 331.82 (supplied by Dell) then Office 365 is both installable and will run normally, however when Windows Update forces the driver update to 349.90, Office 365 is no longer installable, and if it has already been installed, then it will crash whenever any of the apps within the office suite are launched.
Currently in Windows 10 technical preview, there is no way of stopping Windows Update from installing the updated driver. Even if you roll the driver back to the one supplied by Dell, Windows Update will then re-install 349.90 over the top of it.
I have left detailed feedback for Microsoft using the Windows 10 feedback system. I am posting this here to let Dell know about the problem as well.

Greetings. The problem associated with Office 365 has been resolved. I am currently running Windows 10 Build 10074 and I am running Nvidia's GeForce 350.12 driver.
Nvidia released some beta drivers for Windows 10 last week. These are currently 352.??. They have one for the 750M chipset, however the implementation of the 750M chipset used by Dell in the XPS One 27 doesn't appear to be standard., The driver won't install, citing "no compatible hardware found"
Another problem with the current 350.12 drive in either Windows 10 build 10061 or 10074 is that it has broken all 3D gaming. For example Skyrim on Steam no longer runs, and neither does Diablo III on Battle.net. But at least Office 365 works, so I would rather be productive than entertained.

Can't Install C5200 All-in-One Printer Full Feature Software- Runtime error Prevents Installation

I am running Windows 7 64-bit and I am unable to install the HP Photosmart C5200 All-in-One Printer series Full Feature Software that I downloaded from the website.
After extraction, I get the following error:
Microsoft Visual C++ Runtime Library
Runtime Error!
Program: c:\Users\MyUsername~1\AppData\Local\Temp\7zS7526\Setop.exe
This application has requested the Runtime to terminate in an unusual way.
Please contact the application's support team for more information
Can anyone help me solve this problem?
The actual printer and all associated drivers are installed and working correctly.

Hey cmsciulli,
I would first like to welcome you to the HP Support Forums!
When getting the Microsoft Visual C++ Runtime error message. The first step that I would suggest doing, is to make sure that you do have the latest update. I have included a link to the latest available download from Microsoft for 'Visual C++ Redistributable for Visual Studio 2012 Update 4'. Along with this update, I would also suggest completing any other Windows updates that are available to you.
After you have installed all the necessary updates, I would suggest restarting your computer, if you have not already. Then try installing the printer software again.
If you are still experiencing the same error message when trying to install the printer, please let me know the version of Windows that you are currently running. If you need assistance in finding the version, I have included the document 'Which Windows operating system am I running?'.
Looking forward to your reply!
I worked on behalf of HP

Trying to install HP all-in-one C4280

I have installed the drivers and changed the screen resolution to what is required, and I get a message that the document is being sent to the printer, but nothing happens! It is a 5 year old or so, printer and I know it is not a high-speed device. I did a driver check and got a message that my USB cord was out of date. Could that be the problem?

Hi and welcome...you didnt say what model u use and operating system ...
look in devicemanager .. be sure there is no yellow questionmark ... in the usb hub section ...
if there is one... download and install chipset driver....
.... looking for latest printer driver also a good idea...
otherwise its a good idea to buy a new usb cable
sincerely KalvinKlein
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

Am looking for driver to install HP All in one 2050 for window 7

Similar Messages

Maybe you are looking for