Am trying to instal driver for HP 3600 laser printer onto my new laptop HP 625 need help

Am trying to instal driver for HP3600 printer onto my new HP625 laptop but keep getting message that I do not have IE5 or later and cannot instal until I instal IE5 or later.  I have the lastet Internet Explorer so don't know why I get the message and why I can't instal the driver.  Can anyone help me?
Ron Howie

RH, what Windows system? (32-bit or 64-bit)
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Similar Messages

  • I was trying to put all my songs from my Ipod onto my New laptop, but they were all erased. Is there anyway I can restore my 200  songs quickly?

    I was trying to put all my songs from my Ipod onto my New laptop, but they were all erased. Is there anyway I can restore my 200  songs quickly?

    If iTunes purchases then:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Otherwise you will have to get them from where you originally obtained them

  • Cannot install driver for HP Laserjet 1022 Printer.

    I am running Windows 7 64 bit.  When I attempt to install the driver for the HP Laserjet 1022 Printer, although the software recognized that the printer existed (ergo must be plugged into the computer), I keep getting the message that installation is being held up until I connect the printer to the computer.  Any suggestions?
    Thank you

    Hi mtnkeena2,
    Use a different USB cable to see if the computer can then see the printer.
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • Trying to install driver for HP5610 which is sitting shared on a Windows PC

    I have a HP5610 all in one which is currently connected to a Windows PC and is shared. I can "see" the printer through AirPort on my Mac when I try to install the printer, but despite downloading HP installer OJS60_V9.7 beta.dmg and HP Print OSX I am still unable to configure My macbook to use the printer. I am new to Macs and would not go back to a PC if you paid me!! But the downside is I am still learning about the nuances of Macs and how they operate.
    Grateful for any help out there!

    Please disregard.  After using a couple different search engines, i was finally able to find the solution.
    Todd Munsell
    Turbine Engine Test Technician/IT Tech
    Wood Group Pratt & Whitney Industrial Turbine Services, LLC
    Plattsburgh, NY

  • I get error msg 0x00000015 when trying to install driver for scanner of PIXMA MP140. Can anyone plea

    Solved!
    Go to Solution.

    Hello sturrdave.
    To resolve this error, please try downloading and installing the latest drivers from our website at this link.
    This didn't answer your question or issue? Find more help at Contact Us.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Error installing Driver for audio device in MS-6585 Motherboard

    Hi,
    I have MS-6585 Max L motherboard. I installed windows 2000 with SP4. When I tried to install driver for the audio device, it always fails with the following error.
    An error occurred during the installation of the device.
    The data is invalid.
    And in the Device status in the properties menu
    The drivers for this device are not installed. (Code 28)
    I tried to download the latest driver using the "Live Update" and it didn't help. I tried few other options suggested in the web.
    The usual cause of this problem in Windows 2000/XP systems is Registry keys that are set as read-only.
    From the Start menu, click Run and enter RegEdit to run the Registry Editor. Open the following - Keys => HKey_Local_machine => System => CurrentControlSet => Enum => PCI.
    You will see several keys in this form - Ven_xxxx - where xxxx represents a string such as - 1102&Dev_004&Subsys_00011103&Rev_04.
    In each of these folders there is another folder that has a long numerical name. Open each of these folders, and look for the DeviceDesc entry that matches the type of hardware that you are trying unsuccessfully to install. Use the right mouse button to click on the Ven_xxxx entry for that device, and click Permissions. If it is set to read-only, then that is the cause of the problem. To rectify it, change it to Allow Full Control.
    I'm stuck and I am not sure what else to try. Its not clear to me where the problem is. Is there any log I can look? Any other suggestions please
    BTW, It used to work..I had to reinstall windows 2000 and after the clean/format reinstallation it stopped working.
    thanks for any help
    Suresh

    It might be that the drivers are for WinXP. Are you 100% sure they are for 2000? Can you get a copy of XP, it would prabobly solve youre problem.

  • Satellite A100-599 - Unable to install driver for nVidia GeForce Go 7600

    Greetings to all!
    Trying to install driver for Nvidia GeForce Go 7600 after complete system reinstall, but without any success. Only safe mode is available after this driver installation, tried with Windows XP, Vista and Windows 7 and with different drivers from Nvidia and Toshiba sites - same result all the time :(
    Would be glad to realize how to solve this... Thanks a lot.
    Satellite A100-599
    Current OS: Windpws Vista Home premium sp1.
    Message was edited by: Airtoground

    I do not want to install XP again, will try to fund a solution for Vista. Here is what I got from Installs list:
    Component List Satellite A100 PSAAR; Satellite Pro A100 PSAAs; Satego A100 PSAAW
    Contents and Installation order
    for Windows VISTA
    Windows Vista 32bit Home Premium - Windows Vista Home Premium&Basic(English) RTM
    - SLP Module OEMSLP2.0
    - Sun Java 2 Runtime Environment v1.6.0
    1 KB928190(For updated USBHub.sys) KB928190
    2 TOSHIBA Value Added Package Please use the attached ini file for ButtonSetting.ini and FeatureSelect.ini when the TVAP installation. v1.0.7
    3 Intel 945GM/940GML Display Driver v7.14.10.1114 (Package:V15.0.1.1114 PV)
    4 ATI ATI M52P/M54P/M56P Display Driver V8.31.100.3.2-061124a2-039454C
    *5 Nvidia G72M/G72MV/G73M Display Driver v97.46(TBD)*
    I found this driver but it says "no suitable driver found, installation wizard stops its work".
    Any ideas what could it mean?
    Thanks to all.

  • I am trying to install xmarks on Firefox 4 but it tells me Firefox cannot modify the needed file.

    I just upgraded to Firefox 4 and am trying to install xmarks for the first time, but Firefox says it cannot modify the needed file.

    What is the exact error message?

  • I receive the following error message when trying to install QuickTime for Windows "Error writing to file C:/Program Files/QuickTime/QTSystems/QuickTimeCheck.ocx. Verify that you have access to that directory."

    I recieve the following error message when trying to install Quicktime for Windows "Error writing to file C:/Program Files/QuickTime/QTSystems/QuickTimeCheck.ocx. Verify that you have access to that directory."  I just trying to get the latest version of iTunes.  Thanks

    "Error writing to file C:/Program Files/QuickTime/QTSystems/QuickTimeCheck.ocx. Verify that you have access to that directory."
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • I have been trying to install Itunes for 3 days to my computer.  MY eyes burn and I want to smash this computer at this point!!!! HELP ME!!! I receive this message when I run the diagnostic on my iphone Microsoft Windows Vista Ultimate Edition (Build 6000

    I have been trying to install Itunes for 3 days to my computer.  MY eyes burn and I want to smash this computer at this point!!!! HELP ME!!! I receive this message when I run the diagnostic on my iphone
    Microsoft Windows Vista Ultimate Edition (Build 6000)
    Dell Inc. Studio 1535
    iTunes 10.6.1.7
    QuickTime not available
    FairPlay 1.14.37
    Apple Application Support 2.1.7
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device Driver 1.57.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.5.502
    Gracenote MusicID 1.9.5.115
    Gracenote Submit 1.9.5.143
    Gracenote DSP 1.9.5.45
    iTunes Serial Number 0020AEDC02A7C4B8
    Current user is an administrator.
    The current local date and time is 2012-04-17 17:05:40.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
    Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:          {92497F93-8A79-419C-AA27-50CD2F263F77}
    Description:          Microsoft Virtual WiFi Miniport Adapter
    IP Address:          0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:          0.0.0.0
    DHCP Enabled:          Yes
    DHCP Server:
    Lease Obtained:          Wed Dec 31 19:00:00 1969
    Lease Expires:          Wed Dec 31 19:00:00 1969
    DNS Servers:
    Adapter Name:          {6FECCC1D-04CF-4A3F-92B6-DC6E68D12BE5}
    Description:          Dell Wireless 1397 WLAN Mini-Card
    IP Address:          192.168.0.118
    Subnet Mask:          255.255.255.0
    Default Gateway:          192.168.0.1
    DHCP Enabled:          Yes
    DHCP Server:          192.168.0.1
    Lease Obtained:          Tue Apr 17 16:59:28 2012
    Lease Expires:          Wed Apr 18 16:59:28 2012
    DNS Servers:          192.168.20.254
                        192.168.30.217
    Adapter Name:          {3323A300-E864-46C3-A6B6-F0B90AFF4AFE}
    Description:          Broadcom NetLink (TM) Gigabit Ethernet
    IP Address:          0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:          0.0.0.0
    DHCP Enabled:          Yes
    DHCP Server:
    Lease Obtained:          Wed Dec 31 19:00:00 1969
    Lease Expires:          Wed Dec 31 19:00:00 1969
    DNS Servers:
    Active Connection:          LAN Connection
    Connected:          Yes
    Online:                    Yes
    Using Modem:          No
    Using LAN:          Yes
    Using Proxy:          No
    Firewall Information
    Windows Firewall is on.
    iTunes is NOT enabled in Windows Firewall.
    Connection attempt to Apple web site was unsuccessful.
    The network connection timed out.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was unsuccessful.
    The network connection timed out.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2012-04-17 17:04:26.
    **** CD/DVD Drive Tests ****
    No drivers in LowerFilters.
    UpperFilters: GEARAspiWDM (2.2.0.1),
    E: Optiarc DVD+-RW AD-7640S, Rev HD14
    Drive is empty.
    **** Device Connectivity Tests ****
    iPodService 10.6.1.7 is currently running.
    iTunesHelper 10.6.1.7 is currently running.
    Apple Mobile Device Service not found.
    Universal Serial Bus Controllers:
    Intel(R) ICH8 Family USB Universal Host Controller - 2830.  Device is working properly.
    Intel(R) ICH8 Family USB Universal Host Controller - 2831.  Device is working properly.
    Intel(R) ICH8 Family USB Universal Host Controller - 2832.  Device is working properly.
    Intel(R) ICH8 Family USB Universal Host Controller - 2834.  Device is working properly.
    Intel(R) ICH8 Family USB Universal Host Controller - 2835.  Device is working properly.
    Intel(R) ICH8 Family USB2 Enhanced Host Controller - 2836.  Device is working properly.
    Intel(R) ICH8 Family USB2 Enhanced Host Controller - 283A.  Device is working properly.
    FireWire (IEEE 1394) Host Controllers:
    Ricoh 1394 OHCI Compliant Host Controller.  Device is working properly.
    **** Device Sync Tests ****
    No iPod, iPhone, or iPad found.

    This should get your itunes store connection working.
    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • Tried to install software for canon pro 100 getting  message "you can't open the application "setup.app" because it is not supported on this architecture"

    tried to install software for canon pro 100 getting  message "you can't open the application "setup.app" because it is not supported on this architecture"
    any suggestions?

    This is what Canon suggested,  still doesn't work.
    Thank you for your E-mail inquiry regarding your PIXMA PRO-100.
    Based on the information provided in your email, I recommend you download and install the driver for your PIXMA PRO-100 from the web site listed below.
    http://www.usa.canon.com/cusa/support/professional/professional_printers/destop_ printers/pixma_pro_100#DriversAndSoftware
    You will be required to download and install the following:
    1. PRO-100 series Mini Master Setup (OS X 10.5/10.6/10.7/10.8) (under Drivers)
    Should you require further assistance, please feel free to email us or visit our customer support website at http://www.canon.ca
    still receiving Alert This software is not supported by your computer (powerPC-based Macintosh)
    Also received error You can't open the application "Setup.app" because it is not supported on this architecture.
    thanks for your reply A Brody.

  • My Windows 7 Ultimate {32bit} does not install driver for my LG HDD HXD5 320GB

    My windows 7 does not install driver for my LG EXTERNAL HDD HXD5 320GB & its attached using a USB.
    It works perfectly on Other computers having Windows 7 & Windows XP & Windows Vista, just doesn't work on mines.
    I have had internet connected when it was installing hence it got the opportunity to search Windows Update for it but it fails :(
    It works even on my computer ( I have DUAL OS) on windows XP SP3 but i need it to work in Windows 7.
    Please help Thanks :)
    & i have already tried tried the solution which was proposed for another topic in this forum on which it was to Uninstall the driver using Device Manager and unplug the HDD and attach again and let the computer detect and install it again, my computer
    does detect it but fails to install the drivers.
    My Computer has a 2GB of RAM & 2.40GHZ (32bit) with an Intel Core 2 Duo Processor and had come with Windows Vista Home Premium 32bit installed, & i upgraded to Windows 7 Ultimate 32 Bit which is completely updated to all the Updates that Microsoft
    had offered (using the built in Windows Update in Control Panel)
    I have got screen shots of it too.
    http://shumayal.fileave.com/HDD.zip
    PS: Same is the case with some of my USB Flash drives, but in their case they don't get detected at all but get in Windows XP SP3 (which is another OS on my pc) as well as on windows 7 and other OS on OTHER COMPUTERS but not mines in Windows 7.
    Thanks :)

    Hi,
    I recommend you try to update the BIOS and the motherboard chipset drivers for Windows 7 firstly.
    After that, please refresh the USB Stack:
    Control Panel – Device Manager – USB Serial Controllers – Right Click on EVERYTHING and UNINSTALL all except the category itself – Reboot
    . This refreshes the drive and the USB stack
    Then, right click on the LG EXTERNAL HDD HXD 5 320GB in Device Manager and select Update Driver Software.
    You may also try the Windows 7 built-in
    Hardware and Devices troubleshooter.
    Hope it can help you!
    Best Regards,
    Miya Yao
    This posting is provided "AS IS" with no warranties, and confers no rights. | Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial
    to other community members reading the thread.

  • Officejet 6500A Plus, trying to download driver for Win 7

    Officejet 6500A Plus, trying to download driver for Win 7, but won't work on HP's site. Any ideas where I can get the driver?

    Hello, 
    Please download and run the HP Printer Install Wizard from www.hp.com/go/tools
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • Keep getting "program couldn\'t download" when trying to download driver for officejet 6000

    keep getting "program couldn\'t download" when trying to download driver for officejet 6000

    Hello,
    I see that you're having an issue installing the software. Have you tried installing the software from a different browser? 
    Does this happen on chrome and IE?

  • I am trying to install software for iTwin Connect, but after downloading the dmg file and launching the program, I receive a message saying the file can't open and to check my internet connection.  Any ideas?

    I am trying to install software for iTwin Connect, but after downloading the dmg file and launching the program, I receive a message saying the file can't open and to check my internet connection.  Any ideas?

    Many Thanks, Kurt.
    I knew I'd seen the solution you've provided somewhere - either in MacWorld or MacFormat - but couldn't remember the Gatekeeper bit!
    I shall save it somewhere VERY safe now in case this happens again …
    You have made an old man very happy and saved me from worrying that senile decay had suddenly set in. (I was 70 last week so you might understand the situation from that.)
    Best wishes
    OllyanDinah

Maybe you are looking for

  • HP Photosmart e-ALL-IN-ONE C310 printer stuck on "initializing"

    It seems like this "initializing" problem is common with this printer. Has anyone received better help or direction from HP, other than unplugging and plugging in the printer? The only other advice I received was to trade in my printer for another mo

  • Adobe Reader XI: FormBridge and TrustedFunction

    Hello We are using Formbridge to communicate with our Forms. So we load the Form with a XML file, to prefill the fields. With the update to Adobe Reader XI i can't get this working. I tried to add some specific policies with the ProtectedModeWhitelis

  • Why still a 1.5Mbps max for iPods?

    Apple raised the maximum bitrate for H.264 content on iPods to 2.5Mbps a while ago. So why does the iPod setting in Compressor still max out at 1.5Mbps for 640x480 content? I would like to use Compressor due to frame controls, which are second to non

  • Report writer forms

    Hi, we have a custom report writer report, how can we see the layout of the form/selection screen of the report since some changes needs to be done in the selection screen for the report? Thank you.

  • Doubt in Basic ABAP.

    Hi Gurus, I have a small doubt in basic ABAP. What is the exact difference between the below statements. Types: Begin of ty_data,              matnr type mara-matnr,           end of ty_data. Types: Begin of ty_data,              matnr type matnr,