Am unable to find a "reload" button for Firefox under Windows 7.

Where is the Reload button?

Firefox 4.0 has a '''''combined''''' Reload/Stop button that is positioned at the far right of the location bar. (see image attached at bottom of this reply)
In Firefox 4.0 you can move the Stop/Reload button out of the location bar and put them wherever you want on the toolbar. You can also make them appear as separate buttons on the toolbar.
* Open the "View > Toolbars > Customize" window to move them out of the location bar.
* Swap the two buttons or move them to their previous position at the left of the location bar.
* If the order is "Reload - Stop" to get a combined "Reload/Stop" button.
* Swap the order to "Stop - Reload" or separate them otherwise to get two distinct buttons.
<br />
<br />
'''You need to update the following.''' The Plugin version(s) shown below was/were submitted with your question and is/are out of date. You should update to avoid known security issues with the version(s) you have installed. Click on "More system info..." to the right of your question to see what was included with your question.
*Adobe PDF Plug-In For Firefox and Netscape
*Next Generation Java Plug-in 1.6.0_24 for Mozilla browsers
#'''''Check your plugin versions''''' on either of the following links':
#*http://www.mozilla.com/en-US/plugincheck/
#*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#*There are plugin specific testing links available from this page:
#**http://kb.mozillazine.org/Testing_plugins
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''<u>if you have it already installed</u>'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do <u>NOT</u> have Adobe Reader installed'''):
#**SAVE the installer to your hard drive (save to your Desktop so that you can find it after the download). Exit/Close Firefox. Run the installer you just downloaded.
#**Use either of the links below:
#***https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox ''(click on "Installing and updating Adobe Reader")''
#***''<u>Also see Download link</u>''': http://get.adobe.com/reader/otherversions/
#*After the installation, start Firefox and check your version again.
#'''Update the [[Java]] plugin''' to the latest version.
#*Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
#**'''''Be sure to <u>un-check the Yahoo Toolbar</u> option during the install if you do not want it installed.
#*Also see "Manual Update" in this article to update from the Java Control Panel in Windows Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org/Firefox_:_FAQs_:_Install_Java#Multiple_Java_Console_extensions
#*Java Test: http://www.java.com/en/download/help/testvm.xml

Similar Messages

  • Unable to find the published output for this request - problem

    Hi ,
    In the invoice Payables module i modified a report to be open in xml and not text as it was. The program name of this report iis Print Invoice Notice. I did same thing we normally do to register a xml report in ebs.
    The problem is that when i run the report from the invoice form and from the button wich call this raport i get this error:
    Unable to find the published output for this request.
    No output file exist for the request
    and if i see the log file i get this message :
    Arguments
    P_INVOICE_ID='10243'
    APPLLCSP Environment Variable set to :
    XML_REPORTS_XENVIRONMENT is :
    +/oracle/prodora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb+
    XENVIRONMENT is set to  /oracle/prodora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
    Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
    AMERICAN_ALBANIA.UTF8
    +' '+
    REP-3000: Internal error starting Oracle Toolkit.
    Report Builder: Release 6.0.8.27.0 - Production on Fri Mar 27 02:30:46 2009
    +(c) Copyright 1999 Oracle Corporation. All rights reserved.+
    The thing is that if i run this report from Other ->Request -> Run of the same module this raport runs correctly
    And if i change the output of my report (From concurrent manager) to text its open correctly even from there where i want to open it.
    Can anyone give me any sugestion why i get this error while i try to open this xml publisher report from a button in a form in application?
    PS: i am using ebs 11.5 version
    Thanks in advance,
    Best regards

    Hi,
    REP-3000: Internal error starting Oracle ToolkitThis errors was discussed many times before in this thread, so please search for REP-3000 and fix this error first ( [REP-3000|http://forums.oracle.com/forums/search.jspa?threadID=&q=REP-3000&objID=c84&dateRange=all&userID=&numResults=15] )
    Regards,
    Hussein

  • Oracle Install Base -Unable to find Expire relationship button

    Hi Experts,
    I am not able to find "Expire Relationship" button under Configuration Tab while trying to expire parent and child relationship in oracle install base for an intem instance.But for some item instance I am able to find the "Expire Relationship" button under Configuration Tab.
    Can any one please let me know why the "Expire Relationship" button is available for some item and not available for some item instances.
    Thank you.
    Ravi S

    Duplicate post.
    Oracle Install Base -Unable to find Expire relationship button
    Unable to find Expire relationship button

  • Install Base - Unable to find "Expire Relationship" button

    Hi Experts,
    I am not able to find "Expire Relationship" button under Configuration Tab while trying to expire parent and child relationship in oracle install base for an intem instance.But for some item instance I am able to find the "Expire Relationship" button under Configuration Tab.
    Can any one please let me know why the "Expire Relationship" button is available for some item and not available for some item instances.
    Thank you.
    Ravi S

    Duplicate post.
    Oracle Install Base -Unable to find Expire relationship button
    Unable to find Expire relationship button

  • Proxy error-  unable to find software component version for namespace-

    Hi all,
    I need  help  regarding proxy. 
    I am using SAP standard package for one integration  PI 7.0 to SRM. 
    Here we need to use the datatype enhancement for adding some fields.  So I create one extension_datatype  in the datatype enhancement and add the fields . 
    ( I am using Inbount interface, where I am adding the new fields in  PI)
    Now when I go to SRM system and  Run SPROXY system  to regenerate the Proxy.  So that It can reload the New fields.
    Then it reloads and We activate the same. 
    Now at one place when I clicked the data type enhancement object  its giving the error  that  unable to find software component version for namespace" . I did not understand  why  its giving the error.  I added the new fields in the existing  running datatype enhancement.   and reload the reproxy. 
    I have one more datatype enhancement object in the same software component and in the same name space but its not giving the error. 
    Please  help ,  how to resolve it asap. 
    regards
    ram

    1.the datatype enhancement object may not be activated in the same software component .
    for this try these -
    after creating your data types and designing part. First close all the developement objects windows.
    then click on your sw component which you have created and activate it very first.
    then you will be able to activate all other objects
    or when you start activating your data types a new window with list of the objects which you want to activate opens
    in this new window you can see your sw component as the very last object select it first and activate it
    2. update the cache in both system
    i think these 2 reasons.u try it.

  • Getting error "Unable to find the published output for this request"

    1. Created a Data Template
    2. Created a Data Definition using the above Data Template
    3. Created a RTF template and registered the same in XML Publisher Administrator
    4. Created Concurrent program for the data template using 'XDODTEXE' as executable
    5. Ran the above concurrent program and it completed successfully.
    6. When I click the 'View Output' button in Oracle applications it says "Unable to find the published output for this request".
    7. I can see the XML output in the $APPLCSF/out directory.
    8. Also the short name for concurrent program and data definition code and template code are same.
    I assume the Concurrent Manager’s Output Post Processor is not able to setup the layout template to the generated XML.
    Am I missing something here. Can anyone come across this issue.
    I have the XML publisher 5.6.1 patch on the DB. Do I need to take 5.6.2 Patch to fix this issue.
    Thanks

    I tried again after applying XDO 5.6.2. I am still not able to see the output.
    Here is the logfile info. There is no mention of OPP or PUBLISH section:
    XDO Data Engine ver 1.0
    Resp: 21540
    Org ID : 101
    Request ID: 348042
    All Parameters: p_batch_id=7169
    Data Template Code: AUDRPT
    Data Template Application Short Name: XXCUST
    Debug Flag: Y
    {p_batch_id=7169}
    Calling XDO Data Engine...
    Start of log messages from FND_FILE
    End of log messages from FND_FILE
    Executing request completion options...
    ------------- 1) PRINT   -------------
    Printing output file.
    Request ID : 348042
    Number of copies : 0
    Printer : noprint
    Finished executing request completion options.

  • Unable to find data in RSA3 for particular fields2lis_04_p_arbpl datasource

    I am working with datasource 2lis_04_p_arbpl to construct Yield Report. I have a field GAMNG(Target Quantity) in the table AFKO, so I added it to the communication structure and activated it. I also want the field IGMNG(confirmed quantity) which is available in the table AFKO but not appearing in the pool tables of ARBPL datasource, so I have done datasource enhancement and obtained the field in the datasource. When I am checking for the data in RSA3, unable to find data(zero values) for both the fields.
    Edited by: bhagav on Jan 5, 2012 1:20 PM

    Hi ,
    Please make sure that you are doing the extractor check in Update mode 'Full' .If the setup tables are filled then this should pick the data for the 2 newly added fields .
    check and update accordingly later .
    Thanks
    Kamal Mehta

  • Unable to find corresponding attribute definition for taxonomy

    Hi,
    I am facing this issue while the endecaScript Service runs.
    In the ConfigurationGeneratorForge.log I am seeing this message . Can anybody will help me on this
    Thanks in Advance
    Jan 24, 2013 12:18:14 PM com.endeca.itl.fcm.integration.cadk.ifdi.TaxonomyGenerator execute
    WARNING: Associated attribute (dimension) configuration with spec 'product.price_range' was not found for dval with spec 'under_100'.  An associated full configuration is necessary to completely define node, an attempt will be made but some defaults will have to be used (e.g. range dimension bound type)
    Jan 24, 2013 12:18:14 PM com.endeca.itl.fcm.integration.cadk.ifdi.TaxonomyGenerator execute
    WARNING: Associated attribute (dimension) configuration with spec 'product.price_range' was not found for dval with spec '100_to_500'.  An associated full configuration is necessary to completely define node, an attempt will be made but some defaults will have to be used (e.g. range dimension bound type)
    Jan 24, 2013 12:18:14 PM com.endeca.itl.fcm.integration.cadk.ifdi.TaxonomyGenerator execute
    WARNING: Associated attribute (dimension) configuration with spec 'product.price_range' was not found for dval with spec '100_to_150'.  An associated full configuration is necessary to completely define node, an attempt will be made but some defaults will have to be used (e.g. range dimension bound type)
    Jan 24, 2013 12:18:14 PM com.endeca.itl.fcm.integration.cadk.ifdi.TaxonomyGenerator execute
    WARNING: Associated attribute (dimension) configuration with spec 'product.price_range' was not found for dval with spec '150_to_200'.  An associated full configuration is necessary to completely define node, an attempt will be made but some defaults will have to be used (e.g. range dimension bound type)
    Jan 24, 2013 12:18:14 PM com.endeca.itl.fcm.integration.cadk.ifdi.TaxonomyGenerator execute
    WARNING: Associated attribute (dimension) configuration with spec 'product.price_range' was not found for dval with spec '200_to_300'.  An associated full configuration is necessary to completely define node, an attempt will be made but some defaults will have to be used (e.g. range dimension bound type)
    Jan 24, 2013 12:18:14 PM com.endeca.itl.fcm.integration.cadk.ifdi.TaxonomyGenerator execute
    WARNING: Associated attribute (dimension) configuration with spec 'product.price_range' was not found for dval with spec '300_to_400'.  An associated full configuration is necessary to completely define node, an attempt will be made but some defaults will have to be used (e.g. range dimension bound type)
    Jan 24, 2013 12:18:14 PM com.endeca.itl.fcm.integration.cadk.ifdi.TaxonomyGenerator execute
    WARNING: Associated attribute (dimension) configuration with spec 'product.price_range' was not found for dval with spec '400_to_500'.  An associated full configuration is necessary to completely define node, an attempt will be made but some defaults will have to be used (e.g. range dimension bound type)
    Jan 24, 2013 12:18:14 PM com.endeca.itl.fcm.integration.cadk.ifdi.TaxonomyGenerator execute
    WARNING: Associated attribute (dimension) configuration with spec 'product.price_range' was not found for dval with spec '500_to_1000'.  An associated full configuration is necessary to completely define node, an attempt will be made but some defaults will have to be used (e.g. range dimension bound type)
    Jan 24, 2013 12:18:14 PM com.endeca.itl.fcm.integration.cadk.ifdi.TaxonomyGenerator execute
    WARNING: Associated attribute (dimension) configuration with spec 'product.price_range' was not found for dval with spec 'over_1000'.  An associated full configuration is necessary to completely define node, an attempt will be made but some defaults will have to be used (e.g. range dimension bound type)
    Jan 24, 2013 12:18:14 PM com.endeca.edf.adapter.AdapterRunner run
    SEVERE: Unable to find corresponding attribute definition for taxonomy with root node spec 'product.price_range', you must define a dimension in the schema feed
    com.endeca.edf.adapter.AdapterException: Unable to find corresponding attribute definition for taxonomy with root node spec 'product.price_range', you must define a dimension in the schema feed
    +     at com.endeca.itl.fcm.integration.cadk.ifdi.TaxonomyGenerator.execute(TaxonomyGenerator.java:249)+
    +     at com.endeca.itl.fcm.integration.cadk.ConfigurationAdapter.execute(ConfigurationAdapter.java:118)+
    +     at com.endeca.esource.springadapter.SpringDelegateAdapter.execute(SpringDelegateAdapter.java:60)+
    +     at com.endeca.edf.adapter.AdapterRunner.run(AdapterRunner.java:168)+
    +     at com.endeca.edf.adapter.AdapterRunner.main(AdapterRunner.java:43)+

    Hi,
    I was also getting same error, which is solved now.
    For reference following is what we need to check.
    - Proper mapping of source data to endeca dimension is made.
    - You have made entries in "dimension_values.csv" but dimension is not specified in "schema.csv"
    HTH
    MS

  • Unable to find exact master giude for ECC 6.0

    hello experts,
    I want to install SAP netweaver 2004s(Non IDES version) in my PC with oracle 10g as database in WINDOWS/Solaris.
    I am unable to find exact master guide for the above installation in service maarket place. Can you plz help me to find it.
    I want installation guide for  both WINDOWS and Solaris OS.
    Your response will be highly appreaciated.
    Regards,
    Vineet

    Hi ,
         Please go to service market place https://websmp205.sap-ag.de/instguides
         &  follow this path to guides ::
    Installation & Upgrade Guides->SAP Netweaver ->SAP Netweaver 7.0 (2004s) ->Installation
         Here you will find the all installation guides related to Netweaver installation.
    Thanks..
    Mohit

  • Unable to find a qualifications catalog for the root object specified-ESS

    Hi SDN,
    We are getting following exception Unable to find a qualifications catalog for the root object specified   when click on Add New Skill in Skills Profile, ESS . It is working fine , if user is assigned sap_all role. This is issue with permissions. Which role need to be assigned to work with Skills Profile in r3. Please help me out.
    regards,
    Sree.

    Have a look in table T77S0 for an entry called QUALI ESSST and make sure the object ID stored there matches the appropriate node in your qualifications catalogue.
    This setting is designed to be used for restricting ESS users to a particular part of the Quals Catalogue.
    If the table entry was configured in your development system, it may not match the obect numbers in your production system.

  • Where in itunes can I find the eject button for my new ipod nano?

    Where in itunes can I find the eject button for my new ipod nano?

    When in iTunes on the top R it should say your name and ipod and then there is a triangle pointing up with one or two lines underneath.  Just click on that and then it's ok to disconnect.

  • I am having trouble finding the Accept button for my licensing agreement and would like to accept.

    I am having trouble finding the Aceept button for my licensing agreement and would like to accept.

    Well, it's probably below the table... Sounds like you didn't consider the system requirements and installed on a system with too small screen resolution. If so, only using a larger res may possibly revela the magic button...
    Mylenium

  • TS3682 I have a message on my IPad saying " IPad not backed up - This IPad hadn't been backed up. Backups happen when this IPad is plugged in, locked and connected to Wi-Fi. I am unable to activiate the OK button for this message or slide to unlock my IPa

    I have a message on my IPad saying " IPad not backed up - This IPad hadn't been backed up. Backups happen when this IPad is plugged in, locked and connected to Wi-Fi. I am unable to activiate the OK button for this message or slide to unlock my IPad

    Try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • I have business catalyst website imported in Dreamweaver. But I am unable to find or use database for it. Please help me into this

    I have business catalyst website imported in Dreamweaver. But I am unable to find or use database for it. Please help me into this

    You might find better help here: Dreamweaver & Business Catalyst
    Additional Info: Dreamweaver Help | Dreamweaver-Business Catalyst integration

  • How do I find a "download button" for the Flash Player 11.x?

    How do I find a "download button" for the Flash Player 1.x updateon my Mac? All I find is a download tag for other products on the Adobe Flash Player 11.6.602.180" page.

    You don't even need a button.
    Either:
    <a href="docs/mytext.pdf">My text</a>
    Or:
    <a href="docs/my text.pdf"><img src="images/pdf.gif"
    width="34" height="20" border="0"></a>
    where the image is the pdf symbol
    GP01

Maybe you are looking for

  • In FF4, how do I change the orange color of the drop down box that says 'firefox'?

    I find the bright orange drop down box very annoying and distracting. How do I change the color?

  • Basic Runtime for VS 2008

    I have a report that I designed in Crystal 10.  The report runs with no problems from within the designer.  However when I try to run the report in my .NET application and export to a PDF I have no luck.  The report engine just hangs.  I have a diffe

  • Tab in Barcode

    Hi All We are facing a very typical problem with barcodes. Till this date we were printing a barcode on an output which contained a tab feed between two fields, to enable automatic switch to the next field upon scanning by a RF device. This worked pe

  • Website payment and shopping cart buttons not working on Windows Phone browser

    A customer shopping on our site notified me that the "add to cart" and "view cart" buttons were taking him to the PayPal main site and not the shopping cart. I tried a Windows Phone at the Verizon store and found the same issue. I have tested the sit

  • My computer cannot find iTunes folder !!

    I have an older laptop with 40G memory, so I store my iTunes on an external hard drive (H Drive). I went to open my iTunes this morning and it says: "The folder iTunes cannot be found or created, and is required. The default location of this folder i