Am unable to insert table and graphs into word document in labwindow/CVI? can any one help me ?
Am unable to insert table and graphs into word document in labwindow/CVI? can any one help me ?
Are you using the Word Report Generation instrument? You can find it in toolslib\activex\word\wordreport.fp under the CVI directory.
The instrument comes with a sample project that shows how to include table and graphs in a Word document: see samples\activex\word\wordrpt.cws in the samples foder of your CVI installation.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?
Similar Messages
-
i changed my email for my apple account online and now i can't log into itunes on my iphone 5 can any one help please?
Sign out of your Apple ID on the device and sign in with the new credentials.
-
I rubbed the iTunes gift card back off, I was unable to read the serial number as part of it came off, can any one help.
If the page that you posted from doesn't help then you will need to try contacting iTunes support (you will need to give them as much of the serial number and activation code from the card as you can read) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes
-
I installed Apple TV yesterday and then purchased and watched a film for the first time. Today Apple TV does not accept my pass word. I' m confused can any one help me?
there are up to 3 different password
there is the appleID password
there is the wifi encryption password
there is te shared itunes lib password -
I downloaded update 10.5 and now i have lost all my apps can any one help
be very much appreciated if any one could help me out
As long as the apps are still available in the store, and you use the same iTunes account as you originally used to buy them, then you should be able to re-download them for free : http://support.apple.com/kb/HT2519 . If you download them to your computer's iTunes you could then try restoring to your backup and see if that restores them and their settings/content back to your device - a backup doesn't contain the actual apps, just their content/settings, so for the restore to work fully iTunes needs access to the apps so that it can restore them.
-
Internet connection very very slow and it takes 6 hours to download IOS 5 which by that time I am timed out . Can anyone help
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
my ipod touch is frozen and it has a picture of a usb cable and the itunes icon, can any one help me??, my ipod touch is frozen and it has a picture of a usb cable and the itunes icon, can any one help me?? anything would be helpful!
What exactly happen? If it started and froze, at what stage did it freeze?
Maybe this:
Hang during restore process
Following Troubleshooting security software will frequently resolve this issue. This issue can be caused by the default packet size being set incorrectly. There may be third-party software installed that modifies the default packet size in Windows by inserting a TcpWindowSize or MaxGlobalTcpWindowSize entry into the Registry. Contact the manufacturer of the software that installed the packet-size modification for assistance in adjusting this TcpWindowSize values. Typically the default packet size is modified by 3G cellular network card software, ISP communication software, or Internet speed download optimization software. There are legitimate reasons to change the TCP/IP packet size and not use the Windows default settings (for example, network traffic optimization, home/broadband optimization, enterprise app optimization such as database apps, Exchange, and more). Deleting the "TcpWindowSize" or "GlobalMaxTcpWindowSize" entries in Windows Registry could affect the system's performance with other apps or on their network connections. Deleting the customized TCP/IP settings may require the reinstallation of any third-party applications that had modified the TCP/IP settings from the Windows default settings.
There are two ways to resolve this:
You can follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) , or follow the steps below to manually find and remove TcpWindowSize and MaxGlobalTcpWindowSize entries from the Registry.
For Windows XP, Windows Vista, Windows 7: Go to the C:\Windows folder and launch regedit.
Go to Edit > Find.
Search for "TcpWindowSize" entries. There are typically multiple entries of TcpWindowSize/GlobalMaxTcpWindowSize spread throughout the entire Registry. If "TcpWindowSize" exists, one or more third-party applications have changed the user's default Windows settings for TCP/IP.
Go to File and select Export. This step will export a copy of the Registry that can be used as a backup of the original settings.
Delete the "TcpWindowSize" entry.
Search for the next "TcpWindowSize" entry and delete each one until the Registry no longer has any "TcpWindowSize" entries.
Close Regedit, restart the PC, and test.
If you are uncertain as to why these registry entries exist and the PC is a business computer, contact your network administrator and determine what values TCP/IP can be set in their Windows Registry setting so that the PC can update or restore an iOS device rather than deleting the "TcpWindowSize" entry.
If editing the registry does not resolve the issue, restoring on a different computer that did not install the communication software is the step most likely to resolve this issue.
I would first try restoring on another computer. -
Have just down loaded Yosemite over Mountain Lion, Indesign CS5 does not work ( Am dependant on it) although Bridge , Light Room and Elements operate OK How do I solve this rapidly. Can any one help on this issue. Thanks
Sorry to say it, but I think you can see from Bob's response that there's no way to solve this rapidly.
Did you take an image of your Mountain Lion install before upgrading to Yosemite? Roll back to that. If you're not in the habit of taking a snapshot of your system before performing operating system upgrades - get in that habit. If you are dependent on anything at all on hour computer, having a reliable backup method in place is essential. If you don't have a Time Capsule, or some other way to run Time Machine onto a disk that's not in your computer, go set that up yesterday.
If you can't just remove Yosemite and roll back to Mountain Lion for whatever reason, you can partition your drive so that you can install both Yosemite and Mountain Lion on the same drive, and then boot into Mountain Lion when you need to work in CS5. Or you can take your Mountain Lion disc (I assume you have one, no?) and then use it to create a virtual machine in something like VirtualBox to run Mountain Lion from inside Yosemite. -
I have a early 2008 macbook 13 inch and dont have the pass word can any one help?
I have an early 08 macbook that is locked by password and do not know Itunes account. can any one help thanks.
Upgrading to Yosemite
You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
Upgrading to Yosemite
To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mavericks/Yosemite - System Requirements
Macs that can be upgraded to OS X Yosemite
1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table - RoaringApps. -
as title can any one help me thank you
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection. -
I'm having difficulty publishing via ftp to Machighway, I suspect this has to do with the fact I seperated my webpages into 3 sites in iWeb. Can any one tell me how to undo this in iWeb?
You'll have to describe in detail the workflow you're using to upload to Machighway and any messages/warnings that you get along the way. Also what version of iWeb are you using and are you publishing just one of your sites?
OT -
When I connect my Macbook Pro to my Dell DLP projector, either via cable or wirelessly, I just see a dark screen with the mouse and mouse trails only, can any one help?
jpmarkques post is a good start point, after folling his directions, you can try detect displays. Also try different rsolution and refresh rates.
Most of the projectors I have used support a 1024X768 res.
Youcan also try a pram reset if it still does not detect.
Leave theproctor connected and powered up, power down the MBP.
Power back up the MBP and hold the following keys before you hear the start up chime:
Option, command, P,R (no commas) continue to hold these keys till you hear the start up chime 2 times. -
Since itunes and apple tvs latest update I have had problem wtching movies on apple tv via my itunes can any one help, movie takes a very long time to load sometimes never, it use to work really well, whats going on please help?
You might find useful information in item D1 of Time Machine Troubleshooting.
-
Hello guys..!! I have got my new iphone 4 2 days ago.The same day it got a problem of auto restart in every 1, to 2 minutes. I updated and restored it many times...but of no use... can any one help me how to solve this problem..!!
Go to Settings/General/Reset - Erase all content and settings. the connecto to iTunes and restore as a New phone. Do not restore any backup. If the problem persists you have a hardware problem. Take it to Apple for exchange.
This assumes that the phone is not hacked or jailbroken. If it is you will have to go elsewhere on the internet for help. -
I am not able to register my Apple ID for iCloud and the error is "the maximum no of free accounts have been activated on this phone" can any one help me why I need to do
Sir, your Apple ID can be used as an iCloud account as well. They are both the same thing.
You can learn more from --> Set up your Apple ID for iCloud and iTunes - Apple Support
Maybe you are looking for
-
Pricing error: Exchange rate conversion Message no. V1803
Hi, I am getting an error in the pricing procedure Pricing error: Mandatory condition XXXX is missing Message no. V1801 Pricing error: Exchange rate conversion Message no. V1803 where as the exchange rate is maintained. Please guide me
-
TS3297 problem downloading a movie in itunes
I have downloaded a movie and it says 100% downloaded and processing is now 100% but it won't finalise and move in to my library. I have tried resetting computer and deleting movie - i am now stuck - any ideas?
-
I am new to this so I apologise if I am posting in the wrong area. Recently my machine crashed and had to be reloaded. During the process I lost the ability to compile Crystal 8.5 reports. Does anybody know, where can I get a copy of the compiler?
-
I got delivered order email but it is not delivered.
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Hello Looking fo
-
My iphoto display the same picture throughout the whole album. How do I undo that. The last thing I did was clicking on something that has to do with sharing/privacy. All my pictures are still there. Thank you