Am unable to reset Pram anymore

I have a 2010 intel iMac. I've always been able to reset my pram by holding down the command key, option key, P and R at startup. It has never failed. I went to resest it yesterday after noticing my mute key no longer works to find out that the command key, option key, P and R no longer do it, it takes me to the desktop like a regular start up does.
All my software (10.6.8) is up to date. Would anyone know how to take care of this problem? My computer is out of warranty now.
And am I in the right community for this problem?
Thanks much!
Martha

I have resolved my issue with the PRAM, though it is one of the weirdest hardware issues I have ever dealt with, and I still have no explanation. The USB port closest to the sound in / out does not recognize any keyboard input until the login page appears. The other three USB ports recognize keyboard input as expected, and those three all allow me to reset my PRAM, boot into safe mode, etc.
This is a repeatable condition, and is not limited to just one keyboard. (I have reproduced the condition with my iMac keyboard, two Logitech keyboards, and an original B&W G3 keyboard.) I rearranged my cabling behind the computer around the time I installed 10.5.8, changing the port the keyboard was plugged into, so I do not think the upgrade had anything to do with it.
Thanks Topher for the suggestion of checking for a firmware password, that is something that had not crossed my mind. The end result is my issue is resolved by switching ports, but I still have no explanation for the port closest to the sound input / output. Thanks guys.

Similar Messages

Files/Folders Sticking to Mouse Pointer - Not Releasing (Reset PRAM & Apple Hardware Test Fail to Run)

I've been having two issues with my Late 2008 MacBook Pro 15-inch - Running OS X 10.8.5 (Mountain Lion). Unable to Reset the PRAM and Run Apple Hardware Test (AHT).
On a random basis - File/Folder icons are Sticking to the Mouse Pointer - Not Releasing. I've done everything from trashing finder preferences, making sure Universal Access preferences are off, Restoring Defaults in the Energy Saver System Preferences, Resetting the System SMC. Another post mentioned that this is being caused by the Graphics Driver not working correctly - and mentioned to put the MBP to sleep, then wake it up, and the files/folders are no longer sticking to the mouse pointer. This works for me and released the sticking items in the Finder.
OK, Good this is a simple fix, BUT, what is really causing this issue, and how may it be fixed or repaired?
I also tried to Reset the PRAM and Run the Apple Hardware test (AHT), and these both fail to run on my MacBook Pro with OS X 10.8.5.
1) Resetting the PRAM:
Shut down the MBP, press the power button, and hold down at the same time <option><command>-P-R. The Reset PRAM process never starts up, but rather I receive the Padlock/Password Login which logs me into the Restore System Utilities. I'm unable to Reset the PRAM.
2) Apple Hardware Test (AHT):
Shut down the MBP, press the power button, and hold down the "D" key, the system boots up as normal and does not enter the AHT.
The File/Folder Finder sticking to the mouse pointer issue is very annoying. Does anyone have a solution to resolve this issue?
- Cheers

HI Barbara,
It sounds like the hard drive is failing or has failed. Boot from your Mac install disc and if you can run Disk Utility in case the startup disk needs repairs.
Insert your install disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
*(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)*
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
While you have the Disk Utility window open, look at the bottom of the window. Where you see Capacity and Available. *Make sure there is always 10% to 15% free disk space*
If you cannot boot from your install disc, try booting in Safe Mode
What is Safe Mode
Carolyn

How do you reset pram with an external keyboard

Hi, this is related to the keyboard and trackpad not working anymore on my 21month old MBP. I tried reinstalling osx 10.5 and no luck. Tried holding down the power button for 10seconds, got the beep but no trackpad and keyboard afterwards. The preference pane does not show up in the system pref panel anymore for the trackpad. I even downgraded to 10.4. and no luck. So question is there anyway to reset the pram with an external usb keyboard hooked up to the MBP. That is the only way that I can type right now. Or should is this a logic board issue. My video had been having issues about a week ago. The screen would stay blank and also zoom would work properly with pdfs or in CAD (it would be very pixelated at times). Any thoughts. Did the new firmware update fry my computer. Help Apple!

Hi Bob.
You can reset pram via a external usb keyboard the same way you would normally reset pram. Apple + Option + P + R. However pram will do nothing to your situation. Sounds as like you are having much bigger issues. When you reinstalled the OS, what type of install did you do? If you did an erase and install without bringing back you data, you probably have a hardware issue.
Boomer

Can't boot after resetting PRAM??

Before attempting to install Leopard, I upgraded my non-leopard compatible 1.2 GHz processor to a 1.8 GHz leopard compatible one. I also doubled my RAM from 512 to 1024 MB. I then installed leopard but upon restart it continually shut down. Holding down the "c" button at startup, I was able to boot from the leopard disc. I could then even start the computer from my old Panther startup volume. I used 'Disk Utility', ran 'disk repair' and reinstalled Leopard. The same problem persisted.
In another forum someone suggested resetting the PRAM as a next step. This I did but now I'm really freaking out because my computer is totally nonresponsive. My computer starts, I no longer hear that wonderful symphonic major chord, the Apple logo appears (with no circular loading bar), and there it remains frozen. I can no longer boot from the Leopard disc or any other disc (TechTool Pro, DiskWarrior). What should I try now?

japjunk wrote:
Before attempting to install Leopard, I upgraded my non-leopard compatible 1.2 GHz processor to a 1.8 GHz leopard compatible one. I also doubled my RAM from 512 to 1024 MB. I then installed leopard but upon restart it continually shut down. Holding down the "c" button at startup, I was able to boot from the leopard disc. I could then even start the computer from my old Panther startup volume. I used 'Disk Utility', ran 'disk repair' and reinstalled Leopard. The same problem persisted.
In another forum someone suggested resetting the PRAM as a next step. This I did but now I'm really freaking out because my computer is totally nonresponsive. My computer starts, I no longer hear that wonderful symphonic major chord, the Apple logo appears (with no circular loading bar), and there it remains frozen. I can no longer boot from the Leopard disc or any other disc (TechTool Pro, DiskWarrior). What should I try now?
There are several things you can do.
If you can’t start up after resetting PRAM
If you have a redundant array of independent disks (RAID) scheme set up, your computer may not start up if you reset parameter random-access memory (PRAM) when you restart.
If this happens, hold down the Option key while you restart your computer, and select your startup disk when you see the prompt.
f a message says “type ‘mac-boot’ and press return”
If the message “type ‘mac-boot’ and press return” appears when you try to start up your computer, some of your computer’s internal settings need to be reset.
NOTE: It may be helpful to print these instructions before you begin.
Or, try these suggestions:
■ Shut down your computer. Turn the computer back on and immediately hold down Command-Option-P-R, continuing to press until you hear the startup sound for the second time. This resets the computer’s parameter random-access memory (PRAM).
IMPORTANT: Resetting PRAM may change some system settings and preferences. Use System Preferences to restore your settings.
And finally
Restart with the X key
Hold down the X key and choose Apple menu > Restart. This may force the computer to start up using your Mac OS X system.
If the computer starts up, release the X key. Choose Apple menu> System Preferences, and then click Startup Disk. Make sure that the disk containing Mac OS X is selected.
Restart with the Option key
If you are unable to start up using the X key, choose Apple menu > Restart and immediately hold down the Option key.
When icons start to appear in the center of the screen, release the Option key. Select the disk that contains Mac OS X, and then click the forward arrow to continue starting up.
■ If resetting PRAM doesn’t solve the problem, reset non-volatile random access memory (NVRAM). When the “To continue booting ...” message appears, type “reset-nvram” and press Return. Then type “reset-all” and press Return.

I have forgotten icloud account password linked to my ipad. I am unable to reset the password as well as delete this account from my ipad, and use a new one.

I have forgotten icloud account password linked to my ipad. I am unable to reset the password as well as delete this account from my ipad, and use a new one.

None of us here, nor Apple, can help you.

External Display resolution problem after resetting PRAM

Gello, I've got Fujitsu-Siemens P19-2 monitor hooked up to my MbookPro and after resetting PRAM the correct display resolution disappeared from the "Displays" menu in System PReferences.
So did the refresh rate option...
What do I do?
I really need to change the refresh rate and the resolution, but the refresh rate button is grey and unclickable, and the resolution simply isn't there (I need 1280x1024).
REsetting PRAM and SMC didn't help.

After a couple of resets everything went back to normal

HT1222 my iphone 4S no longer plays music output to speaker after updating to version 6.1.3. I am unable to reset the phone to an earlier version! How do I get my audio output to speaker back? (music, audible, youtube, netflix))

my iphone 4S no longer plays music output to speaker after updating to version 6.1.3. I am unable to reset the phone to an earlier version! How do I get my audio output to speaker back? (music, audible, youtube, netflix)

So you have business contacts that were lost... do you not have these on a Database in some shape or form? Sounds like you need to invest in a RAID1 backup setup for your computer so you dont have this issue in the future.
As for repairing your problem, sounds like you are going to need to start from scratch at this point or if the data is still on your phone look into a program that can take the information from the phone onto iTunes.

Unable to reset or add new email addresses on HP Officejet Pro 8600 Premium e-All-in-one N911n

Unable to reset or add new email addresses on my HP Office jet J4680

Hi johndavis196,
Welcome to the HP Support forums. I see that you are trying to add new email addresses to your Officejet J4680 printer.
To better assist you, would you please provide some additional information:
How is the printer connected (USB cable, ethernet, or wireless)? The Officejet J4680 supports all three methods.
What operating system are you using on your computer (Windows 7, Mac 10.8, or Windows 8, etc)?
Where are you trying to update the email addresses?
Are you encountering any error messages? If yes, what is the error message and where is it displayed (printer or computer)?
What steps are you taking before you are stopped?
Thank you.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

TS2570 Hi, MacBook Pro & Snow Leopard- startup probs. I have tried repairing with the disk utility, resetting PRAM, booting in safe mode, and finally trying to get to archive&install the o/s, but it cannot find the destination volume. IsAn erase the only

(10.6.8 Intel core duo 2009)
Hi,
I have a grey screen and grey rotating wheel startup probs. I have tried repairing with the disk utility, resetting PRAM, booting in safe mode (which gave a subset of the errors that 'disk repair' did- namely- 'invalid sibling link,invalid record count, invalid node structure, invalid key length) and finally trying to get to archive&install the o/s, but it cannot find the destination volume. Is an erase the only option? PS I have backed up most files individually, but my daughter did not back up any from her user account. Any help would be appreciated. J

Gray, Blue or White screen at boot, w/spinner/progress bar
Why is my computer slow?
..Step by Step to fix your Mac
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

Unable to reset password of user through IDM UI (IDM 7.1)

Hello,
We are unable to reset password of users in SAP Backend System through IDM UI.
The moment we enter new password and submit, we are getting below dump.
Any idea???
java.lang.NullPointerException
at com.sap.idm.wd.wf.task.TaskCompView.onActionSave(TaskCompView.java:172)
at com.sap.idm.wd.wf.task.wdp.InternalTaskCompView.wdInvokeEventHandler(InternalTaskCompView.java:223)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:333)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:741)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:694)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Thanks
Aditi

Hello Aditi,
In AS Java 7.1 and higher you go to short link /nwa and navigate
to Configuration -> Infrastructure -> Java System Properties – Switch to
application tab in second section (Details about <InstanceName>) ->
search for tc~idm~jmx~app.
For 7.0 you have to do that in Visual Admin but I would need to read docu to know where it is too.
But you can find that all in UI installation guide http://service.sap.com/~sapidb/011000358700001233082010E
Regards
Norman

How to reset PRAM of a remote Mac

How do I reset PRAM of a remote Mac? (It's a Mac Mini 1,1 running 10.5.8)
I can connect to that remote Mac via VNC and SSH.
And of course, right after reset, I need it to automatically reboot and allow VNC and SSH access.
Thanks!

Hello, I know of no way to do that, since it's done without any OS running at all.

Working in adobe illustrator - computer crashed - will not soft boot or reset PRAM - should i reinstall from CD snow leopard 10.6.3? I have an extra hard drive in my MAC with time machine on it set to do auto back ups. How do i recover ?

working in adobe illustrator - computer crashed - will not soft boot or reset PRAM - should i reinstall from CD snow leopard 10.6.3? I have an extra hard drive in my MAC with time machine on it set to do auto back ups. How do i recover ?

Well first you have to figure out what is wrong with the machine and solve that problem first.
Your post is very vague on what occured, and there are many types of "crashes" it really depends upon what see on the screen and what the hardware does, we can't see it to tell you, so you have to tell us.
I suggest you run through these user tips and provide more information about your hardware.
Disconnect the TimeMachine drive for now
..Step by Step to fix your Mac
Help us to help you on these forums
Create a data recovery/undelete external boot drive
If this is going way over your head, there are local PC/Mac techs that will assist you for a fee, Apple only does hardware repairs and is advised to use them if you discover it is, especially if under warranty/AppleCare.
Hard drive and RAM upgrades can be handled yourself or by a outside tech in many older models of Mac, but don't expect Apple to cover the new parts.
Install/upgrade RAM or storage drive in Mac's

TS3048 No bluetooth whatsoever on Macbook Pro 10.6.8, resetting PRAM and SMC does nothing. Help?

Bought a wireless Magic Mouse today, was real pumped to go home and use it. When I turned my computer on, there was no bluetooth whatsoever to connect to. I read the forums for solutions, tried resetting PRAM and SMC. Neither worked. Let me know what I can do.

If the HDD will boot your MBP externally but not when installed in the MBP, that usually indicates a bad connection.. Either the connecting plug is not seated properly, ot the connecting cable is loose or faulty. Open the MBP and check very carefully for those conditions. To repair or replace connecting cable is not an expensive repair, even at an Apple store.
Ciao.

Help with BBOD! Can't seem to get to the bottom of it. Have tried SMC reset, PRAM reset, reinstall of Mavericks, Carbon copy clone, checked my CPU, Memory is 500GB and I'm only using 250GB thereabouts.

Here's what I've tried;
SMC reset
Pram reset
Looked at activity monitor - mostly seems OK aside from a kernel task taking up memory (approx 460MB) but CPU is around 96% idle.
Fan seems to be running constantly - heats up noticeably when I close the MBP
Despite a re-install of Mavericks, MBP is running frustratingly slow. Just typing is enough to bring on the beach ball.
Have backed up everything, reinstalled from a clone, checked through Apple Hardware test and carried out a Verify Disk Permission - nothing was reported, erased the drive and set up again - problem still stands.
Memory is running at 3.43 GB without anything really running bar Safari.
A little loath to install SMC fan control without knowing what's wrong.
Checked software updates.
Can anyone tell me what the matter is? Does this have a fix?
Have been reading up various posts but to no avail so have resorted to posting myself.
Does this sound familiar to anyone?
Many, many thanks
Roque

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[45]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}')printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ s/ *:$//;x;s/\n//;/Apple|Genesy|Intel|SMSC/d;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;} ' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/:/;END { if(NR<100)print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { $4="";gsub(" "," ");gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}')print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR==2'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' ' s/^.{52}//;s/ .+//p ' ' /Launch[AD].+\.plist$/;END{if(NR<100)print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' '/\.(framew|lproj)/d;/plist:|:.+(M.+exec|scrip)/s/:[^:]+//p' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/;END{if(NR<100)print "/System/"};' '/^\/usr\/lib\/.+dylib$/p' '/\/etc\/(auto_m|hosts[^.]|peri)/s/^\.\/[^/]+//p' ' /\/(Contents\/.+\/Contents|Frameworks)\//d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' /lR/ { if($2<='${p[25]}')print $2;} ' ' BEGIN { FS=":";} $3~/(sh|ng|ic)$/ { n=split($3,a,".");sub(/_2.+/,"",a[n-1]);b=b"\n"$2" "a[n-1]" "a[n]" "$1;c=c$1;} END { d="sort|tail -n'${p[38]}'";print b|d;close(d);if(c)print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(A.+ E.+ text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' /:/{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status '-F bsd -k Sender kernel -k Message Req "Beac|caug|dead[^bl]|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN" -k Message Rne "Goog|ksadm|SMC:" -o -k Sender fseventsd -k Message Req "SL"' '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/*/*.{BS,Bas,Es,OSXU,Rem}*.bom' '{/,}L*/Lo*/Diag* -type f \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;' '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto_master,{cron,fs}tab,hosts,{launchd,sysctl}.conf} /usr/local/etc/periodic/*/* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n 'syscall::'${p[33+j]}':return {@out[execname,uid]=sum(arg0)} tick-10sec {trunc(@out,1);exit(0)}'";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP RSSI Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear;};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(echo "${v[$1]}") <(echo "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ test "$v"&&echo "$_";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;A0;{ A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D22 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D23 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;D22 32 31 43 38;D23 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

In Adobe Acrobat XI I could draw on PDFs. It seems that I am unable to do this anymore. Any tips?

In Adobe Acrobat XI I could draw on PDFs. It seems that I am unable to do this anymore. Any tips?

Hey Tragon,
Could you please specify more on the same as what exactly are you trying to do within PDFs.
Are you trying to draw your signature or something else?
What exact dot version of Acrobat XI are you using?
Let me know more so that I can analyze this issue.
Regards,
Anubha

Am unable to reset Pram anymore

Similar Messages

Maybe you are looking for