Am using 2007 iMac running 10.4.11.  Do not wish to upgrade now.  Where can I find an external hard drive to work with it?  Also need a printer?

I'm using a 20" iMac that I purchased in 2007.  It's running OS 10.4.11,  and still doing beautifully.  But I've got to get serious about upgrading and I don't want to lose the material that's on it.   Purchased an external hard drive about two years ago,  copied everything I wanted at that time on to it.  When I tried using the h.d. a few days ago it was garbled.  Now I see that inside the box it says that it requires OS 10.5+.   Anyone know if there's still a new hard drive out there that would work with 10.4.11?   Can't even find thumb drives to work with my system anymore.   Any ideas would be appreciated.

If I were you I would bite the bullet and upgrade to Snow Leopard. You will still be able to use AppleWorks by installing the Rosetta emulator included in Snow Leopard. And, it's a much better OS version than Tiger.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
See App Compatibility Table - RoaringApps.

Similar Messages

  • I can't find my external hard drive on my imac.  Any ideas?

    Whatever I do I can't seem to locate my external hard drive to back up my files.   If anybody has any ideas it would be much appreciated.

    Launch disk utility do you see the drive in the window on the left? if not then the drive is not working or not connected.  Try using a different USB port, and make sure you have power to the drive. 

  • I have 10.5.8 installed and can't find an external hard drive.  It used to work...but hasn't in a while.  any suggestions?

    I have an older Mac, prob 2007/early 2008.  I've got OS 10.5.8 installed.  For the last couple months, I haven't been able to recognize my iomega HD.  It used to work with time machine, had it set to run on a weekly basis if there were changes, and then I started getting messages that Time Machine hadn't run in a while.  Googled it, and there are a lot of suggestions out there.  I've tried a few, but to no avail.  Any suggestions?

    It could be the cable or the drive may have failed. Plug in another external HD and see if that works OK, if it does then that points the finger at the EHD.
    Roger

  • Terminal - how to find my external hard drive using unix commands

    just discovered terminal and using cd and ls commands, which are the only commands i know, i realized that i can't find my external hard drive. i thought it would be listed on my desktop, as it is in the OSX interface, but it isn't there.
    not that im skilled enough to use terminal yet, but i thought the first step would be being able to navigate the computer's files.
    really curious as to where my external hard drive is and how i can find it using unix commands in terminal.
    i was trying to figure it out myself, then i thought surely someone knows this and could tell me in a sec.
    thanks.
    ibook   Mac OS X (10.4.4)  
    ibook   Mac OS X (10.4.4)  

    "ls /Volumes" will list all volumes, including internal and external hard drives and mounted disk images. I find "disktool -l" more useful in scripts, as it tells you which volume names correspond to which "mount points" under /Volumes. Usually they're the same, but if you have two volumes with the same name, or you try to remount a removable volume before it is fully unmounted, you'll end up with a mount point that consists of the volume name with a numerical suffix.

  • After trying to change permissions on my computer so others on my network can access files, my external Hard Drive has a lock on it and I can't access files. I've tried repairing permissions, logging in under another Administrator account, using Terminal

    After trying to change permissions on my computer so others on my network can grab files, my external Hard Drive has a lock on it and I can't access files. I've tried repairing permissions, logging in under another Administrator account, using Terminal to fix the problem, downloaded BatChmod but nothing works… Any other suggestions? I have an Imac running OS10.6.8.

    There is suddenly a lock icon on my external backup drive!
    Custom Permissions

  • I connected my external hard drive to my new imac to put all of the information from my macbook onto it. i have been working on the macbook now and want to reconnect the external hard drive so my imac is updated with the work. How is that done?

    I connected my external hard drive to my new imac to put all of the information from my macbook onto it. I have been working on the macbook now and want to reconnect the external hard drive so my imac is updated with the work. How is that done? or is it possible?

    As I said, I don't use Time Machine, so it'd be best to wait for an "expert" answer, but, with my very limited knowledge, I'd say: probably not - so, for now, I'd suggest you read up on Time Machine:
    http://web.me.com/pondini/Time_Machine/Home.html
    http://support.apple.com/kb/index?page=search&src=support_site.home.search&local e=en_US&q=time%20machine
    And, you might be attracting more knowledgeable answers if you were to post this question in the Time Machine Forum (part of the Snow Leopard forums).

  • I currently have a MAC Mini, which has 1 Firewire 800 port.  I have a 1TB external hard disk that runs at Firewire 400.  Can I insert another external hard drive that runs at Firewire 800?

    Here's the deal.  Currently running SL 10.6.8 on a MAC Mini.  Planning for eventual upgrade to ML.  Have a 1TB external hard drive partitioned into two volumes, one volume for Time Machine and one volume for SL which I periodically update using Superduper.  Thus I always have a point-in-time bootable backup on the external hard drive.
    The MAC Mini supports Firewire 800.  However, booting from my current external hard disk is pretty slow, since it only supports Firewire 400.  I am considering buying an Iomega MiniMax which supports Firewire 800.  Then, I would use the MiniMax as my bootable backup volume, and relegate the older hard drive to Time Machine. 
    So, question #1 is, can I daisychain the new MiniMax between the MAC Mini and my existing external hard drive?  My expectation is that the new Mini Max would run using Firewire 800 and that the existing hard drive would run at Firewire 400 speed as it does today.  If it doesn't (e.g., daisychaining in the Firewire 400 external disk with the MiniMax Firewire 800 external disk ends up running the whole leg at 400), my resolution will be to run the existing hard disk off an available USB port and have just the MiniMax running at Firewire 800.
    Why am I going to all this trouble?  That's question #2.  I don't trust upgrades; they always break something.  When I upgraded from 10.5.x to 10.6.x, the web directories got renamed, and all of my web apps 403'd until I figured out what happened.  Plus, I have accounts for other family members, and in order to ensure their ability to use the computer during my upgrade process, I need to have the ability to fall-back quickly to a known-stable version of OSX.  So what I'm trying to do is insulate myself from problems by partitioning the MiniMax into two volumes, taking a Superduper image of my current installation on the Mac Mini to MiniMax external drive volume 1, then upgrading to ML on the MAC Mini, and take a SuperDuper image of that to MiniMax external drive volume 2.  Then, if the upgrade results in problems I can't resolve immediately, I can simply reimage the MAC Mini from MiniMax volume 1.  BUT ...
    ... I've read that the ML installation creates a "service and support" partition that is different than the startup disk.  I'm concerned that I won't be able to reimage the hard disk in the MAC Mini once I upgrade it to ML because of the partitioning changes it introduces on the startup disk.  Theoretically, I +should+ be able to use the disk utility on my SL system to repartition the disk in the MAC Mini prior to reimaging it from my backup, but I'm considering the possibility that the new partition may be of a type that the SL disk utility cannot identify, and might therefore be unable to delete or even detect.  So I'm hoping someone else has been down this road and can advise me.  Even at Firewire 800 speeds, booting from an external disk is still going to be slow, so I want to be able to restore my SL image to the MAC Mini hard disk.
    A little background on me.  I work for a major disaster recovery provider.  I used to have a Mac PRO G5, which I got used, and the first thing I did with it was install a second hard disk, SuperDupe an image from the first disk to the second, and made sure I could boot from the second.  THEN I started using and customizing the MAC.  I really feel vulnerable with the MAC Mini, since it only has the single internal hard drive - sort of like going out in public dressed only in a long T-shirt.  So my whole thing is, I ABSOLUTELY MUST BE ABLE TO PUT THINGS BACK THE WAY THEY WERE before I do the migration to ML.
    Obsessive-cumpulsive?  Yep.  Anal?  You got it.  That's why I'm in the DR business.

    You may have overloaded the port, following the instructions below it should reset:
    +1. Shut down the computer.+
    +2. Disconnect all devices and all other cables, except the keyboard and mouse cable(s).+
    +3. Disconnect the computer from the power outlet and wait for 3 to 5 minutes.+
    +4. Plug the computer back in and turn it on.+
    +5. Reconnect the device(s) (one at a time if there is more than one) and test. Test with each port if you have more than one.+
    http://support.apple.com/kb/HT1317?viewlocale=en_US

  • Windows not recognizing my time capsle - I just purchased a new computer that runs windows 8 and it doesn't want to recognize the time capsule as an external hard drive (ie doesn't show up under my compter).  I've downloaded airport utility...

    I just purchased a new computer that runs windows 8 and it doesn't want to recognize the time capsule as an external hard drive (ie doesn't show up under my compter).  I've downloaded and run airport utility, but it seems to have a hard time finding the time capsule...maybe one out of 10 times it will find it.
    What's more, when I look under network infrastructure under the control panel, it shows my Broadcom ADSL centurylink Router...so I'm wondering if my modem/router combo is overriding the router function on my timecapsule and the time capsule is not being used as a router...
    Any help much appreciated!

    In this case the TC should be in bridge mode.
    Win8 is still problematic. Try using ethernet instead of wireless. I think the drivers are poor still and it is well worth having a try via ethernet if you haven't already.
    Otherwise you will need to wait for apple to release bonjour for windows 8 and airport utility.. which is not out yet.
    Also make sure the windows is set to home, not work or public.. even turn off the firewall.
    Open windows explorer and type the TC ip address into the address bar.. (none of which is perhaps the same.. I gave away windows at vista.. shudder)
    \\TCIPadderss.

  • I have a Seagate Slim Portable 500 GB USB 3.0 external hard drive that worked great with my Macbook Pro 13" Retina but gets ejected and won't show files on any iMac.

    I have a Seagate Slim Portable 500 GB USB 3.0 external hard drive that worked great with my Macbook Pro 13" Retina but gets ejected and won't show files on any iMac. My Macbook Pro and the two different iMacs I tried it on were all using Mountain Lion, so the only difference was the iMac versus Macbook Pro.

    I just tried this, no luck...
    I connected a different USB cable, still the same problem. Tried both cables with the problematic hard drive on two different computers, still the same problem.
    At this point I assume I'll probably need professional help in saving the files, thanks for the assistance.

  • Can i connect a external hard drive to apple tv 3 generation, for see my movies itunes with out use streaming or icloud?

    can i connect a external hard drive to apple tv 3 generation, for see my movies itunes with out use streaming or icloud?  in apple tv 3 and 2?
    That  i want to know is i can connect a external hard drive to apple tv, for see my movies that i keep in my external hard drive,  i dont want to see then  whit the streaming and icloud, or used my  laptop o pc for access de movies and stuff.
    i put iny spanish to, because i feel my english is not so good, but i hope you understand me.
    if i can´t  connect a external hard  drive, wich others media players divices you know that can see itunes movies?
    ¿quisiera saber si se puede conectar una memoria externa al apple tv, para ver el contenido de itunes que tengo guardado en esa memoria como peliculas, ect?
    lo que no quiero es usar  la icloud, o el servicio streamig para ver mi contenido, ni tener que usar la computadora para ver mi contenido el la tv?
    y de no poderse conectar  que otros dispositivos media pleyer conoces para ver peliculas de itunes  en la tv?

    Welcome to the Apple Community.
    can i connect a external hard drive to apple tv 3 generation
    Unfortunately not.

  • If I already have an Airport Express Base Station, can i hook an external hard drive into it's USB port and use that hard drive with Time Machine?

    If I already have an Airport Express Base Station, can i hook an external hard drive into it's USB port and use that hard drive with Time Machine?

    No, and that shouldn't be done with an AirPort Extreme or Time Capsule.
    (66017)

  • Can you unplug the external hard drive you are using for time machine

    can you unplug the external hard drive you are using for time machine and then plug it back in and it work normals because i have a mac book and don't want to always be carrieing the external hard drive every where i go so can you ?

    Yes, that will work fine. It will back up normally once you plug it in again. I do this with my MacBook.

  • How can I backup an external hard drive using Time Machine?

    How can I backup an external hard drive connected to my MacBook Pro using Time Machine?

    Attach drive, open Time Machine preferences, be sure external drive is not in the Exclude list.

  • Since I downloaded Maverick, I cannot find my External Hard Drive in the "Finder" area. I have to unplug all the time the hard drive to be recognized by my iMac. How can I fix this problem? Thank You.

    Since I downloaded Maverick, I cannot find my External Hard Drive in the "Finder" area. I have to unplug all the time the hard drive to be recognized by my iMac. How can I fix this problem? Thank You.

    Check Finderr->Preferences->General and ensure that HDs are selected for display. If so and they still don't, Reset the NVRAM/PRAM and Reset the SMC, and see if that does the trick.

  • How can i format my external hard drive to write files from Mac without loosing the files that i alredy have on my external hard when i used it with windows?

    How can i format my external hard drive to write files from Mac without loosing the files that i alredy have on my external hard when i used it with windows?
    I have been using Windows to write files to my 1TB WD external hard drive and I do not want to format to loose the files capacity of around 500GB
    Someone, Please help

    Hi Allen,
    Is there any way to store the back up to Mac and restore after formating?

Maybe you are looking for

  • Control browser properties from a java application while launching a browse

    How to control the properties of a browser when it is launched from a java application? I am using the command " Runtime.getRuntime().exec("rundll32 url.dll,FileProtocolHandler "+url); " to launch the browser. The syntax of "exec" command is "public

  • How to import/export value for ekko-netwr

    Hi friends, amount value 'ekko-netwr'  from incude LV61AA43 should pass to include LV61AA43 for this iam using import/export paramters but there is no parameter id for netwr . How can i pass this amout to this rountine. Thank u , prasad.

  • Display Costs on Accounting Tab in Company Code (object / Project) curerncy

    Hello Forum Experts, We have this major issue whereas teh costs on the Accounting Tab are shown in Controlling Area Currency. It seems this is the standard cProjects behaviour. What changes / enhancement do we have to implement to ensure that the cos

  • Application Support folders disappeared

    Finder has been hanging recently, causing other apps (and sometimes the whole system) to become unresponsive.  i googled for fixes, and followed a suggestion to reboot into Safe Mode, navigate through a few directories in Finder, then restart normall

  • Can i get a screenshot without the toolbar?

    I know I can crop it out in photo editing, but I want to get the full iPad screen size.  Is there a simple way to take a screenshot, and hide the toolbar at the same time?