AM7.1 and DS with custom DIT/schema
I am installing AM 7.1 in realm mode and using a remote DS 6. I use the configure now option and choose no when asked if directory is provisioned with user data. Everything is ok but i need to config AM for my directory.
My DIT is strange because all my users are at root, o=company. I also use a custom attribute for the rdn in user entries. How do I get AM to look at root for people entries, it seems by default to use ou=people? How do I get AM to see and use a custom dn for people entries?
This is a conflict in the OID or Name in either an object class or attribute.
No attribute must have an identical OID or name as another defined attribute
(both OID and name identical between 2 definitions means same definition)
The error log on the Consumer should have the OID or the name of the schema element that is already defined.
Schema replication between 5.2 and 5.1 servers is explained in the Administration Guide of Directory Server 5.2 and may require some settings (I don't recall which way, but it's covered in the documentation).
Regards,
Ludovic.
Similar Messages
-
hi there i ahve ipod touch 2nd gen and i am tryna restore it but get error 21 with orginal fireware and 1601 with custom firewarw and when connected it to itunes and i try to boot it by resotring it white screen with lines through it
Those errors are covered here:
http://support.apple.com/kb/TS3694 -
Restful Web Services - First Party Authentication with custom authentication schemes
Hi
I've successfully enabled security using first party authentication on our Restful web services however these only work with the built in Apex accounts and not other authentication schemes.
Ideally I'd like to authenticate against LDAP, however when I enable this authentication scheme the restful services don't work as they only support the Apex accounts.
Has anyone implemented LDAP authentication for Apex restful web services, either directly or using Glassfish ? Does anyone know if support for custom authentication schemes on the feature roadmap for a future Listener release ?
I attempted to configure the glassfish application against LDAP but am still working on it.. glassfish never challenged the client to authenticate (it's only to be for the web service endpoints and nothing else), so any pointers on how to set that up for Apex would be appreciated.
Thanks
KesHi Gemma,
unfortunately at the moment you are caught between a rock and a hard place:
- As you point out there is no way in APEX for a user to self-register themselves, short of developing your own table to store users and configuring APEX custom auth to authenticate against that table
- Listener can only authenticate against the the APEX user repository, it cannot integrate with custom APEX authentication.
There may be other options though, by leveraging the authentication capabilities in the JRE and/or WebLogic/GlassFish application servers. We're interested in addressing this use case, so if you wish to investigate further please send me an email ( colm <dot> divilly <at> oracle <dot> com).
Thanks,
Colm Divilly -
Difference between VMI and collaboration with customer
Hai,
I am trying to understand the difference between VMI and collaborative planning with customer(CPC)
Please correct me if I am wrong. In VMI, a vendor or manufacturer sells his material to customer and through EDI, the customer gives the information such as forecast, stock etc.
In CPC, the vendor and customer interchange information, such as demand, stock levels, promotions, delivery dates etc., based on ITS.
What is the difference between these two?
If I am not wrong, EDI is used for outside company communication andITS for within. So, can I say that VMI is for customer outside the company and CPC for internal customer?
Thank you.Hi Visu,
Service provided by a vendor for a customer, whereby the vendor plans material requirements in the customer's company. Vendor-managed inventory is only possible if the vendor has access to the customer's current stock and sales data.
In the ERP system, the following functions are available for vendor-managed inventory:
Transfer of stock and sales data by EDI
Receipt of stock and sales data by EDI
Replenishment planning for customers
Creation of a purchase order for an external EDI order acknowledgment
supply chain management tool that synchronizes demand signals and supply chain activities by utilizing Internet technology. Collaborative Planning enables supply chain partners to view, share and synchronize common information within the supply chain.
Hope this helps.
Regards,
Mohan -
Create a Homescreen Symbol with custom URL Scheme
Hi People,
I hope you can help me.
As the subject said I want to create a Home-screen-Symbol with a URL Scheme. Meaning a Link that directs me to a Note in Evernote.
If I Enter the URL in Safari it takes me there, that works perfect. Now I want to use the "Add to Home-screen" Function of Safari to create a Symbol that takes me to that Note also.
But there is also my problem: Safari immediately opens the App and I can't use the Function and if I get back to safari the tab with the URL is already cleaned up.
Does someone know a trick where I can create such a symbol or edit the URL of an existing Symbol?
First of all: Jailbreaking is no Option here.Does it work without iWeb?
As in : a webpage with code you typed yourself.
If so, then display that page in an <iframe>. Or paste the code in a HTML snippet.
My impression is, that iWeb only allow http:// URLs.
And do you really want to install an app on someone's iPad just by clicking the link?
Why not provide a link to the app in the App Store? -
Exporting images in PDF and broadcasting with custom template error in BI 7
Hello! We're in the process of creating broadcast reports and are running into some problems. We need someone with experience exporting PDF's or creating broadcasts using custom web templates in 7.0.
Our issue is two-pronged:
1) We want users to be able to export (with WAD command) web reports to PDF with the company logo. We have a custom web template with just a JPG image and analysis grid. But for some reason, when this template gets exported to PDF, the image does not get included. We've tried embedding the image into table, group, container, container-layout to no avail. Any suggestions?
2) We also need the company logo in PDF broadcast reports. We replaced the standard broadcasting web template 0BROADCATING_TEMPLATE (using RSCUST27) with a custom one, but we immediately get the "error loading template ..." when trying to access the Broadcaster. There seem to be no OSS notes for this.
Please let me know if you need any additional information.
Thank you!!1) We want users to be able to export (with WAD command) web reports to PDF with the company logo. We have a custom web template with just a JPG image and analysis grid. But for some reason, when this template gets exported to PDF, the image does not get included. We've tried embedding the image into table, group, container, container-layout to no avail. Any suggestions?
which std template are you replacing with this custom template?
Broadcasting
Query Precalculation
Report Precalculat.
Enterpr. Report
Ad Hoc Analysis
I mean which template does online link default to when it is clicked. -
Upgrading PeopleSoft and Risks with Custom Development
My company's parent is on PS 8.8, and is trying to bring my company into their system. To do this, they are going to have to do a lot of custom development surrounding labor-based project costing.
From some of the PeopleSoft developers, I am hearing that it is risky to develop on this older platform, and then upgrade to version 9.1, because some of the customization will not carry over well and will need to be re-written. Their boss insists that this is an exaggeration, and it should not be a concern.
Can someone please tell me what the pitfalls are of doing heavy custom development on an older version with plans to upgrade in the immediate future?
Thank you so much.Hi Alexandra,
I'll give you the details of attaching an application log to BPEM which are (Let say) gnerated by a Transaction.
Step 1: Define Business Process Area
Step 2: Define Business process code
step 3: Define Transaction attached to this Business Process Code
Step 4: Run transaction EMMA to view it.
I can write all the customizing for this here also however i would recommond a link which contains the cookbook of implementing BPEM.
Go to :
SAP service market place->sap for utilities->product information->Business Process Exception Management->cookbook & Guidelines->BPEM Cookook
<https://websmp101.sap-ag.de/solutions>
In this document go to the Section 4 (Customizing) here you can see all the steps in detail with example to set up the system for attaching an Application log with BPEM.
In case if you face some problem, revert.
Please assign the point.
Amit -
Unable to call, reach and connect with Customer Service
How come every time I call *611 or 18009220204 from my cell phone. It directs me to the *611 app. Then at the very bottom of the app, it says "call customer service" then I'm directed to enter my billing pin. Then it just cycles after I enter it back to the *611 app. Why am I unable to call customer service any more?? Very very frustrating. This app definitely has a glitch obviously and I need to speak with someone.
yes i can make calls to everyone..except verizon. i have the samsung droid charge. what is this new *611 app all about. i'm not interested in even having to view it, just so i can scroll all the way down to call customer service and ask to enter my pin..time consuming. and even more frustrating that i still can't speak to anyone.
-
SSL between NSAPI and WLS with custom certificate and RequireSSLHostMatch=true fails
I am trying to use SSL for communication between NSAPI and WebLogic
server (server authentication at the NSAPI).
Therefore, a custom server certificate is installed on WLS, containing this
server's hostname. The NSAPI is configured (RequireSSLHostMatch=true) to
check the hostname contained in the certificate against the WebLogicHost
parameter in the "obj.conf" file. The corresponding TrustedCAFile is installed
for NSAPI.
The SSL setup seems to work ok, but when matching the hostname, it seems like
NSAPI is trying to do a string-match against the numeric IP of the WebLogicHost,
not on the hostname as configured in the WebLogicHost parameter.
The relevant entry in the "obj.conf" file:
<Object name="weblogic" ppath="*">
Service fn=wl-proxy WebLogicHost=btsun2a.muc \
WebLogicPort=7162 \
Debug=ALL \
SecureProxy=ON \
TrustedCAFile=/home/qx13604/wls61/config/testdomain/TC_RootServer_PEM_Class0.pem
RequireSSLHostMatch=true
</Object>
I am using WLS6.1 with NSAPI (both Solaris). The content of "wlproxy.log" is as
follows.
Any ideas?
Content of "wlproxy.log":
Thu Oct 11 12:30:22 2001 INFO: SSL is configured
Thu Oct 11 12:30:22 2001 INFO: Initializing SSL library
Thu Oct 11 12:30:22 2001 Loaded 1 trusted CA's
Thu Oct 11 12:30:22 2001 INFO: Successfully initialized SSL
Thu Oct 11 12:30:22 2001 INFO: SSL configured successfully
Thu Oct 11 12:30:22 2001 ....relFile.../index.jsp...
Thu Oct 11 12:30:22 2001 URI=[index.jsp]
Thu Oct 11 12:30:22 2001 Initializing lastIndex=0 for a list of length=1
Thu Oct 11 12:30:22 2001 attempt #0 out of a max of 5
Thu Oct 11 12:30:22 2001 general list: trying connect to '160.50.106.101'/7162/7162
at line 1156 for '/index.jsp'
Thu Oct 11 12:30:22 2001 New SSL URL: match = 1 oid = 22
Thu Oct 11 12:30:22 2001 Going to check the general server list
Thu Oct 11 12:30:22 2001 WLS info : 160.50.106.101:7162 recycled? 0
Thu Oct 11 12:30:22 2001 Hdrs from Client:[connection]=[Keep-Alive]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[user-agent]=[Mozilla/4.72 [de]C-CCK-MCD
(WinNT; U)]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[host]=[btsun1a.muc:99]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[accept]=[image/gif, image/x-xbitmap,
image/jpeg, image/pjpeg, image/png, */*]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[accept-encoding]=[gzip]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[accept-language]=[de,en]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[accept-charset]=[iso-8859-1,*,utf-8]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[connection]=[Keep-Alive]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[user-agent]=[Mozilla/4.72 [de]C-CCK-MCD
(WinNT; U)]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[host]=[btsun1a.muc:99]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[accept]=[image/gif, image/x-xbitmap, image/jpeg,
image/pjpeg, image/png, */*]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[accept-encoding]=[gzip]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[accept-language]=[de,en]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[accept-charset]=[iso-8859-1,*,utf-8]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[WL-Proxy-SSL]=[false]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[X-WebLogic-Force-Cookie]=[true]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[Proxy-Client-IP]=[160.50.136.171]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[X-Forwarded-For]=[160.50.136.171]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[Proxy-Path-Translated]=[wwws/ns-homeV417/docs/index.jsp]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[Proxy-Path-Translated-Base]=[wwws/ns-homeV417/docs]
Thu Oct 11 12:30:22 2001 INFO: sysSend 52
Thu Oct 11 12:30:22 2001 Partial read socket
Thu Oct 11 12:30:22 2001 INFO: SSLWrite sent 0
Thu Oct 11 12:30:22 2001 INFO: Host (btsun2a.muc) doesn't match (160.50.106.101),
validation failed
Thu Oct 11 12:30:22 2001 ERROR: SSLWrite failed
Thu Oct 11 12:30:22 2001 SEND failed (ret=-1) at 549 of file URL.cpp
Thu Oct 11 12:30:22 2001 *******Exception type [WRITE_ERROR] raised at line 550
of URL.cpp
Thu Oct 11 12:30:22 2001 got exception in sendRequest phase: WRITE_ERROR [os error=0,
line 550 of URL.cpp]: at line 944
Thu Oct 11 12:30:22 2001 INFO: Closing SSL context
Thu Oct 11 12:30:22 2001 INFO: sysSend 14
Thu Oct 11 12:30:22 2001 Failing over after sendRequest exception
Thu Oct 11 12:30:22 2001 attempt #1 out of a max of 5
Thu Oct 11 12:30:22 2001 general list: trying connect to '160.50.106.101'/7162/7162
at line 1156 for '/index.jsp'
Thu Oct 11 12:30:22 2001 New SSL URL: match = 1 oid = 22
Thu Oct 11 12:30:22 2001 Going to check the general server list
Thu Oct 11 12:30:22 2001 WLS info : 160.50.106.101:7162 recycled? 0
Thu Oct 11 12:30:22 2001 Hdrs from Client:[connection]=[Keep-Alive]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[user-agent]=[Mozilla/4.72 [de]C-CCK-MCD
(WinNT; U)]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[host]=[btsun1a.muc:99]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[accept]=[image/gif, image/x-xbitmap,
image/jpeg, image/pjpeg, image/png, */*]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[accept-encoding]=[gzip]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[accept-language]=[de,en]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[accept-charset]=[iso-8859-1,*,utf-8]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[connection]=[Keep-Alive]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[user-agent]=[Mozilla/4.72 [de]C-CCK-MCD
(WinNT; U)]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[host]=[btsun1a.muc:99]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[accept]=[image/gif, image/x-xbitmap, image/jpeg,
image/pjpeg, image/png, */*]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[accept-encoding]=[gzip]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[accept-language]=[de,en]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[accept-charset]=[iso-8859-1,*,utf-8]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[WL-Proxy-SSL]=[false]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[X-WebLogic-Force-Cookie]=[true]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[Proxy-Client-IP]=[160.50.136.171]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[X-Forwarded-For]=[160.50.136.171]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[Proxy-Path-Translated]=[wwws/ns-homeV417/docs/index.jsp]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[Proxy-Path-Translated-Base]=[wwws/ns-homeV417/docs]
Thu Oct 11 12:30:22 2001 INFO: sysSend 52
Thu Oct 11 12:30:22 2001 Partial read socket
Thu Oct 11 12:30:22 2001 INFO: SSLWrite sent 0
Thu Oct 11 12:30:22 2001 INFO: Host (btsun2a.muc) doesn't match (160.50.106.101),
validation failed
Thu Oct 11 12:30:22 2001 ERROR: SSLWrite failed
Thu Oct 11 12:30:22 2001 SEND failed (ret=-1) at 549 of file URL.cpp
Thu Oct 11 12:30:22 2001 *******Exception type [WRITE_ERROR] raised at line 550
of URL.cpp
Thu Oct 11 12:30:22 2001 got exception in sendRequest phase: WRITE_ERROR [os error=0,
line 550 of URL.cpp]: at line 944
Thu Oct 11 12:30:22 2001 INFO: Closing SSL context
Thu Oct 11 12:30:22 2001 INFO: sysSend 14
Thu Oct 11 12:30:22 2001 Failing over after sendRequest exception
Thu Oct 11 12:30:22 2001 attempt #2 out of a max of 5
Thu Oct 11 12:30:22 2001 general list: trying connect to '160.50.106.101'/7162/7162
at line 1156 for '/index.jsp'
Thu Oct 11 12:30:22 2001 New SSL URL: match = 1 oid = 22
Thu Oct 11 12:30:22 2001 Going to check the general server list
Thu Oct 11 12:30:22 2001 WLS info : 160.50.106.101:7162 recycled? 0
Thu Oct 11 12:30:22 2001 Hdrs from Client:[connection]=[Keep-Alive]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[user-agent]=[Mozilla/4.72 [de]C-CCK-MCD
(WinNT; U)]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[host]=[btsun1a.muc:99]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[accept]=[image/gif, image/x-xbitmap,
image/jpeg, image/pjpeg, image/png, */*]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[accept-encoding]=[gzip]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[accept-language]=[de,en]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[accept-charset]=[iso-8859-1,*,utf-8]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[connection]=[Keep-Alive]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[user-agent]=[Mozilla/4.72 [de]C-CCK-MCD
(WinNT; U)]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[host]=[btsun1a.muc:99]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[accept]=[image/gif, image/x-xbitmap, image/jpeg,
image/pjpeg, image/png, */*]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[accept-encoding]=[gzip]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[accept-language]=[de,en]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[accept-charset]=[iso-8859-1,*,utf-8]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[WL-Proxy-SSL]=[false]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[X-WebLogic-Force-Cookie]=[true]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[Proxy-Client-IP]=[160.50.136.171]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[X-Forwarded-For]=[160.50.136.171]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[Proxy-Path-Translated]=[wwws/ns-homeV417/docs/index.jsp]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[Proxy-Path-Translated-Base]=[wwws/ns-homeV417/docs]
Thu Oct 11 12:30:22 2001 INFO: sysSend 52
Thu Oct 11 12:30:22 2001 Partial read socket
Thu Oct 11 12:30:22 2001 INFO: SSLWrite sent 0
Thu Oct 11 12:30:22 2001 INFO: Host (btsun2a.muc) doesn't match (160.50.106.101),
validation failed
Thu Oct 11 12:30:22 2001 ERROR: SSLWrite failed
Thu Oct 11 12:30:22 2001 SEND failed (ret=-1) at 549 of file URL.cpp
Thu Oct 11 12:30:22 2001 *******Exception type [WRITE_ERROR] raised at line 550
of URL.cpp
Thu Oct 11 12:30:22 2001 got exception in sendRequest phase: WRITE_ERROR [os error=0,
line 550 of URL.cpp]: at line 944
Thu Oct 11 12:30:22 2001 INFO: Closing SSL context
Thu Oct 11 12:30:22 2001 INFO: sysSend 14
Thu Oct 11 12:30:22 2001 Failing over after sendRequest exception
Thu Oct 11 12:30:22 2001 attempt #3 out of a max of 5
Thu Oct 11 12:30:22 2001 general list: trying connect to '160.50.106.101'/7162/7162
at line 1156 for '/index.jsp'
Thu Oct 11 12:30:22 2001 New SSL URL: match = 1 oid = 22
Thu Oct 11 12:30:22 2001 Going to check the general server list
Thu Oct 11 12:30:22 2001 WLS info : 160.50.106.101:7162 recycled? 0
Thu Oct 11 12:30:22 2001 Hdrs from Client:[connection]=[Keep-Alive]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[user-agent]=[Mozilla/4.72 [de]C-CCK-MCD
(WinNT; U)]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[host]=[btsun1a.muc:99]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[accept]=[image/gif, image/x-xbitmap,
image/jpeg, image/pjpeg, image/png, */*]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[accept-encoding]=[gzip]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[accept-language]=[de,en]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[accept-charset]=[iso-8859-1,*,utf-8]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[connection]=[Keep-Alive]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[user-agent]=[Mozilla/4.72 [de]C-CCK-MCD
(WinNT; U)]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[host]=[btsun1a.muc:99]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[accept]=[image/gif, image/x-xbitmap, image/jpeg,
image/pjpeg, image/png, */*]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[accept-encoding]=[gzip]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[accept-language]=[de,en]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[accept-charset]=[iso-8859-1,*,utf-8]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[WL-Proxy-SSL]=[false]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[X-WebLogic-Force-Cookie]=[true]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[Proxy-Client-IP]=[160.50.136.171]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[X-Forwarded-For]=[160.50.136.171]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[Proxy-Path-Translated]=[wwws/ns-homeV417/docs/index.jsp]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[Proxy-Path-Translated-Base]=[wwws/ns-homeV417/docs]
Thu Oct 11 12:30:22 2001 INFO: sysSend 52
Thu Oct 11 12:30:22 2001 Partial read socket
Thu Oct 11 12:30:22 2001 INFO: SSLWrite sent 0
Thu Oct 11 12:30:22 2001 INFO: Host (btsun2a.muc) doesn't match (160.50.106.101),
validation failed
Thu Oct 11 12:30:22 2001 ERROR: SSLWrite failed
Thu Oct 11 12:30:22 2001 SEND failed (ret=-1) at 549 of file URL.cpp
Thu Oct 11 12:30:22 2001 *******Exception type [WRITE_ERROR] raised at line 550
of URL.cpp
Thu Oct 11 12:30:22 2001 got exception in sendRequest phase: WRITE_ERROR [os error=0,
line 550 of URL.cpp]: at line 944
Thu Oct 11 12:30:22 2001 INFO: Closing SSL context
Thu Oct 11 12:30:22 2001 INFO: sysSend 14
Thu Oct 11 12:30:22 2001 Failing over after sendRequest exception
Thu Oct 11 12:30:22 2001 attempt #4 out of a max of 5
Thu Oct 11 12:30:22 2001 general list: trying connect to '160.50.106.101'/7162/7162
at line 1156 for '/index.jsp'
Thu Oct 11 12:30:22 2001 New SSL URL: match = 1 oid = 22
Thu Oct 11 12:30:22 2001 Going to check the general server list
Thu Oct 11 12:30:22 2001 WLS info : 160.50.106.101:7162 recycled? 0
Thu Oct 11 12:30:22 2001 Hdrs from Client:[connection]=[Keep-Alive]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[user-agent]=[Mozilla/4.72 [de]C-CCK-MCD
(WinNT; U)]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[host]=[btsun1a.muc:99]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[accept]=[image/gif, image/x-xbitmap,
image/jpeg, image/pjpeg, image/png, */*]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[accept-encoding]=[gzip]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[accept-language]=[de,en]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[accept-charset]=[iso-8859-1,*,utf-8]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[connection]=[Keep-Alive]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[user-agent]=[Mozilla/4.72 [de]C-CCK-MCD
(WinNT; U)]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[host]=[btsun1a.muc:99]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[accept]=[image/gif, image/x-xbitmap, image/jpeg,
image/pjpeg, image/png, */*]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[accept-encoding]=[gzip]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[accept-language]=[de,en]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[accept-charset]=[iso-8859-1,*,utf-8]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[WL-Proxy-SSL]=[false]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[X-WebLogic-Force-Cookie]=[true]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[Proxy-Client-IP]=[160.50.136.171]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[X-Forwarded-For]=[160.50.136.171]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[Proxy-Path-Translated]=[wwws/ns-homeV417/docs/index.jsp]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[Proxy-Path-Translated-Base]=[wwws/ns-homeV417/docs]
Thu Oct 11 12:30:22 2001 INFO: sysSend 52
Thu Oct 11 12:30:22 2001 Partial read socket
Thu Oct 11 12:30:22 2001 INFO: SSLWrite sent 0
Thu Oct 11 12:30:22 2001 INFO: Host (btsun2a.muc) doesn't match (160.50.106.101),
validation failed
Thu Oct 11 12:30:22 2001 ERROR: SSLWrite failed
Thu Oct 11 12:30:22 2001 SEND failed (ret=-1) at 549 of file URL.cpp
Thu Oct 11 12:30:22 2001 *******Exception type [WRITE_ERROR] raised at line 550
of URL.cpp
Thu Oct 11 12:30:22 2001 got exception in sendRequest phase: WRITE_ERROR [os error=0,
line 550 of URL.cpp]: at line 944
Thu Oct 11 12:30:22 2001 INFO: Closing SSL context
Thu Oct 11 12:30:22 2001 INFO: sysSend 14
Thu Oct 11 12:30:22 2001 Failing over after sendRequest exception
Thu Oct 11 12:30:22 2001 attempt #5 out of a max of 5
Thu Oct 11 12:30:22 2001 general list: trying connect to '160.50.106.101'/7162/7162
at line 1156 for '/index.jsp'
Thu Oct 11 12:30:22 2001 New SSL URL: match = 1 oid = 22
Thu Oct 11 12:30:22 2001 Going to check the general server list
Thu Oct 11 12:30:22 2001 WLS info : 160.50.106.101:7162 recycled? 0
Thu Oct 11 12:30:22 2001 Hdrs from Client:[connection]=[Keep-Alive]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[user-agent]=[Mozilla/4.72 [de]C-CCK-MCD
(WinNT; U)]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[host]=[btsun1a.muc:99]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[accept]=[image/gif, image/x-xbitmap,
image/jpeg, image/pjpeg, image/png, */*]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[accept-encoding]=[gzip]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[accept-language]=[de,en]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[accept-charset]=[iso-8859-1,*,utf-8]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[connection]=[Keep-Alive]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[user-agent]=[Mozilla/4.72 [de]C-CCK-MCD
(WinNT; U)]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[host]=[btsun1a.muc:99]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[accept]=[image/gif, image/x-xbitmap, image/jpeg,
image/pjpeg, image/png, */*]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[accept-encoding]=[gzip]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[accept-language]=[de,en]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[accept-charset]=[iso-8859-1,*,utf-8]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[WL-Proxy-SSL]=[false]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[X-WebLogic-Force-Cookie]=[true]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[Proxy-Client-IP]=[160.50.136.171]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[X-Forwarded-For]=[160.50.136.171]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[Proxy-Path-Translated]=[wwws/ns-homeV417/docs/index.jsp]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[Proxy-Path-Translated-Base]=[wwws/ns-homeV417/docs]
Thu Oct 11 12:30:22 2001 INFO: sysSend 52
Thu Oct 11 12:30:22 2001 Partial read socket
Thu Oct 11 12:30:22 2001 INFO: SSLWrite sent 0
Thu Oct 11 12:30:22 2001 INFO: Host (btsun2a.muc) doesn't match (160.50.106.101),
validation failed
Thu Oct 11 12:30:22 2001 ERROR: SSLWrite failed
Thu Oct 11 12:30:22 2001 SEND failed (ret=-1) at 549 of file URL.cpp
Thu Oct 11 12:30:22 2001 *******Exception type [WRITE_ERROR] raised at line 550
of URL.cpp
Thu Oct 11 12:30:22 2001 got exception in sendRequest phase: WRITE_ERROR [os error=0,
line 550 of URL.cpp]: at line 944
Thu Oct 11 12:30:22 2001 INFO: Closing SSL context
Thu Oct 11 12:30:22 2001 INFO: sysSend 14
Thu Oct 11 12:30:22 2001 Failing over after sendRequest exception
Thu Oct 11 12:30:22 2001 request [index.jsp] processed ..................I tried some other case and configured a certificate containing
the numeric IP as hostname. The authentication works fine then,
but it wouldn't be nice to hard-code the IP in the certificate
(btw. the WebLogicHost parameter is still given as DNS name, not
as IP address).
Has anyone got a solution for this?
"Wolfgang Jodl" <[email protected]> wrote:
>
I am trying to use SSL for communication between NSAPI and WebLogic
server (server authentication at the NSAPI).
Therefore, a custom server certificate is installed on WLS, containing
this
server's hostname. The NSAPI is configured (RequireSSLHostMatch=true)
to
check the hostname contained in the certificate against the WebLogicHost
parameter in the "obj.conf" file. The corresponding TrustedCAFile is
installed
for NSAPI.
The SSL setup seems to work ok, but when matching the hostname, it seems
like
NSAPI is trying to do a string-match against the numeric IP of the WebLogicHost,
not on the hostname as configured in the WebLogicHost parameter.
The relevant entry in the "obj.conf" file:
<Object name="weblogic" ppath="*">
Service fn=wl-proxy WebLogicHost=btsun2a.muc \
WebLogicPort=7162 \
Debug=ALL \
SecureProxy=ON \
TrustedCAFile=/home/qx13604/wls61/config/testdomain/TC_RootServer_PEM_Class0.pem
RequireSSLHostMatch=true
</Object>
I am using WLS6.1 with NSAPI (both Solaris). The content of "wlproxy.log"
is as
follows.
Any ideas? -
XML Sign and Verify with custom canonization algorithm
How can i implement my canonization algorithm?
I'm unable to find any explanation or examples of how to do it?
ThanksWoland_CA wrote:
How can i implement my canonization algorithm?Do you mean "canonicalization"? Also, are you using the JSR 105 API (javax.xml.crypto)?
If so, you need to implement a subclass of javax.xml.crypto.dsig.TransformService.
I'm unable to find any explanation or examples of how to do it?Well, it is a fairly new API (introduced in Java SE 6), and the implementation included in SE 6 contains all of the required standard canonicalization algorithms (inclusive C14N, exclusive C14N). So it's not something many developers need to do. -
Problems with custom authentication when migrating from 3.2 to 4.1.1
Hi,
we’re about to upgrade our APEX instances to 4.1.1 and to migrate our applications. I encountered some problems with our custom authentication schema.
1. Recognize already authenticated sessions: in 3.2 the sentry function could return false as long as the user was not authenticated. Public pages could still be displayed (including the login page). The result of the function apex_custom_auth.is_session_valid returned false until once the sentry function returned true. How can I recognize non authenticated sessions in 4.1.1? I looked for the test the Condition “User is the public user (user has not authenticated)” computes on a page but didn’t found the right one. It’s not what docu states here (comparison with the public user): http://docs.oracle.com/cd/E23903_01/doc/doc.41/e21674/condition001.htm#HTMDB25943. I replaced the test with p_authentication.username = ‘nobody’. It works. But that doesn’t seem to me to be the right way …
2. Post_logout lacks session context: the Post Logout Procedure does not receive a session_id and username. Neither the V(‘APP_SESSION’) nor p_authentication.session_id are set. This applies to both plugin authentication schemes and non-plugin custom authentication schemes. Is there another way to obtain the logged-out sessions infos or is this a bug?
See apex.oracle.com for a demo, workspace WS_MW, gast/gast. Can someone please guide me the way?
MichaelHello again,
there are no replies until now .... I reviewed some posts regarding custom authentication again and did not find any solution for the issues. Found some that worked with APEX 3.2.1 but not with 4.1.1. I can only work around
1.) in an insecure way, because the non documented (?) user "nobody" can change and all new sessions will be considered authenticated
2.) in a way, that ends up in implementing the logout from the non apex environment outside the authentication schema or authentication plugin.
May be I should contact support for at least the second issue because this doesn't work as documented or am I doing something wrong?
Michael -
I'd like to express how unsatisfied we have been with Verizon on an issue that has been ongoing now since March 14, 2014. It involves an upgrade on one of our lines. After all these months, phone call with customer service, Tech support, and visits to a Verizon stores, I would hope that there are ample notation on our acct but since I've had to explain the situation on a bi-weekly time frame, I would assume that no one has documented any contacts.
We've been with Verizon for few yrs now and I have always been very satisfied with Verizon who, up until now , always provided excellent customer service in their knowledge, concern, and customer satisfaction. But I have to say, every positive outlook I've had with your company has been wiped clean with the worst service we have received in the last few months.
We upgraded my daughter's phone on 03-14-14 with a Samsung Galaxy Mini from an Iphone 4s. Within 24 hrs, the phone failed. After 2 visits to a Verizon store the next day which took 6 hrs, we still had to return the next day to speak to a manager. The 2 stores advised us to make a CLAIM on the defective phone thru our insurance plan with Verizon. A CLAIM on a 24 hr old phone!! A 3rd visit with a manager finally convinced him to replace the phone with another new phone at the store. Within 2 weeks - issues began to occur with the replacement phone. Several visits more, several calls more with Customer Service, several calls more with tech support which adds up to soooo many of our time taken up to simple have temporary "fixes" is outrageous. If I billed Verizon for my time, perhaps the situation would have been resolved more quickly. Each visit lasts approx 2 hrs, each phone call approx 1-1 1/2 hrs. We are talking at least 2x a month for the course of 5 1/2 months. Plus the time it takes to get the phone back to where she needs it - contacts, apps, internet.
Not once were we offered a new phone or replace the phone. Not until today. Replace the phone with the same phone that my daughter has grown to hate. So basically a 3rd phone - same phone. She is not interested in this phone any longer. She dealt with this phone model for far too long.
Today we were offered to replace the phone with same phone, or pay for a refurbished Iphone 4. So basically she would be going back to her original Iphone 4s before the upgraded WITH a cost. So her upgrade was wasted, we'd paid over $200 for a defective phone, and would need to pay for an even older model Iphone 4 and have to pay for it. Why wasn't she offered a different phone within those 30 days after the upgrade and 6 visits?
Every rep at the stores, every rep in tech support would provide a different reason for the issue. Finally, tech support advised not to download apps. WHAT GOOD IS A SMARTPHONE IF YOU CAN'T HAVE APPS??? We are talking about a 20 yrs college student who attends school in another state. Do you know the trouble she has to go thru to visit a store? To find 2 hrs between being a full time student with 2 jobs to sit on the phone with a tech support or go to a Verizon store? Once-ok Twice-maybe BUT for 5 months?
She's not eligible for an upgrade. She will be stuck with a phone that she had grown to hate. And I with customer service which I've grown to hate.
Finally, The Edge. Trying to find a way to make my daughter happy, I spoke with 4 representative today about the Edge. Each rep gave me 4 different information. 1st rep advised Edge phone could not be used on another line so I could not use a line eligible for the Edge and give that phone to my daughter since she isn't eligible for the Edge. 2nd rep advised that although new phone thru edge must be used by same number that it was eligible for, we could use the current phone o that line for my daughter. My son currently has an Iphone 5 and is eligible for the Edge early upgrade. He would not have to return his Iphone 5 so my daughter could use it. However, all the lines would have to go to the More Everything Plan and share the Data between all our phone lines. 3rd rep advised the cost would almost double from our current $358 to go to the More Everything Plan so suggested to have 2 accounts vs just 1. 4th rep advised not every line needs to go the More Everything Plan, we could not keep the current phone, and my daughter could get a replacement phone but same phone or made exception to offer the Edge early upgrade to my daughter but only after we go thru the replacement program because the phone we send to Verizon has to be in good working order/no defects.
After 5 1/2 months, it is now Verizon that is indicating that we have a defective phone and can't accept it thru the Edge program or we would get billed approx $299 for a defective phone. After 5 1/2 months of me calling in about a defective phone that not one rep replaced because they "fixed" the problem ( by the way, a temporary fix is not fixing, if it was fixed I would have made those calls today or writing this email), I am now being told her phone is defective. She advised to get a replacement phone first, return the old phone, activate the new phone, then call in to get the Edge early upgrade. So my daughter would have to do all this, plus add contacts back, apps and whatever else she needs to use her phone just to turn around a couple weeks later and do it all over again with the new phone thru the Edge program. Once again, we are the ones having to be inconvenienced and go thru all these steps. Did I mention she is going to be studying abroad in Italy beginning Nov? So the idea of having to wait 2-3 weeks for a new phone and having only a week or 2 to test the phone to make sure it's working properly before she's out of the country doesn't sound appealing to me. Verizon has made us have a defective phone for 5 months advising it's in good working order after each and every "fix" but Verizon will not accept that phone if returned in the same condition as a phone in good working condition. Do you see the irony in that?
I have reached my limit and after 5 yrs of my brother in law trying to convince us to switch to AT&T where he works in their Corporate Office, I can honestly say I will not be sad to leave Verizon. Especially when one of your reps simply provided me with the contract end dates to provide to AT&T because they offered to buy out our contract. No effort in customer retention what so ever. That was a phone call on Thursday.
And yes, one of your tech reps tried to convince me of all the hassle it would be to switch and time AT&T would take to buy out our contracts but honestly it was the pot calling the kettle. I am not in the position to discuss hassle and time after 5 months of getting that with Verizon. Did I mention it's my brother in law so we would be getting special treatment and no out of pocket expenses to switch. It was my loyalty and satisfaction with Verizon that has kept me from switching all these years. Something Verizon clearly does not appreciate.
So can you guess where I am with confidence that your customer service department is knowledgable about the plans/offers? Where I am that I can trust what I'm being told?
I know this email is confusing and really hard to understand...perhaps now you will know how i've been feeling--lost and confused with all the mis-information, with a hit and miss phone, and out of time with all the 1 1/2 hr to 2 hrs EACH wasted on this issue.
On top of all this, I can't even find out how to file a complaint with anyone higher up than Customer Service.Jneklason wrote:
~snip~
I know this email is confusing and really hard to understand...perhaps now you will know how i've been feeling--lost and confused with all the mis-information, with a hit and miss phone, and out of time with all the 1 1/2 hr to 2 hrs EACH wasted on this issue.
On top of all this, I can't even find out how to file a complaint with anyone higher up than Customer Service.
I hate to tell you this, but you didn't write an email. You wrote a discussion post on the Verizon Wireless Community forum which is a public peer to peer forum. Unfortunately since you didn't mark your post as a question, the VZW reps that roam this community won't ever see your post. Before you re-post it, don't. Duplicate posts get removed from the community.
I see there were several missteps both by the reps and yourself in your post. First you should have insisted on returning the phone within the 14 day return policy period. Second which Samsung Galaxy mini model did you purchase? The S3 mini or the S4 mini? Did you do any research prior to deciding on this device. The reps at that time deflected the easiest course of action, by trying to get you to replace the phone under insurance instead of returning the phone. The Early Edge payment option requires the current phone on the line using the early Edge must be returned to Verizon Wireless. Did you once considered going to a third party site like Swappa to purchase a gently used device for your daughter? -
CreateInsert and LOV with multiple return values
HI. I am on Build JDEVADF_11.1.2.3.0_GENERIC_120914.0223.6276.1
I have a View Object which is based on Entity Object.
View Object has customer_name and customer_id attributes.
customer_name attribute has LOV (input field with LOV) based on some other View Object (which of caurse holds customer name and customer id data)
I defined that when LOV return the chosen values it will populate customer_name with "Customer Name" value and customer_id with "Customer Id" value
All atributes are updatable
I droped my View Object on the page and also "CreateInsert" buton. When I click on "CreateInsert" button, I can see new row added as expected, customer_name field has LOV. I can choose from LOV and can see customers and customer_id data. But when I click OK in the LOV pop-up only customer_name attribute is populated!
I do see that customer_id is returned from LOV (I implemented ReturnPopupEvent listener), but still the customer id remains empty.
I though maybe I need to add LOV as auto submit = true and set LOV to be a partial trigger for customer_id. But still - it didn't help
However, if I run Application Module tester, I do get what I want. I can create new row and when I change customer name , both customer name and customer id fields are populated
Please adviceHi Michael,
On Lov VO, make sure you have at least one or combination of attributes as Key attribute. and re test.
Thanks,
Jeet -
Replication of BP linked with Customer number from R/3 to CRM
Hi,
We are trying to replicate BP linked with the customer number.
In R/3 when a BP is created automatically a customer is created for this BP (due to activation of synchrozination- BP -->Customer ) with different numbers and is available in the customer-general data tab of the BP in the field - Customer number.
Both BP and Customer are having different numbers this needs to be replicated to crm as a BP with the Customer number appearing in the Identificatio tab as R/3 customer number (identification type).
Example - A BP with number-100 is created then automatically a customer with number 2000 is attached to this BP -100. The same needs to be replicated to CRM. Both BP and customer shud have same GUID.
With the settings that is done now two records are getting created seperately one with BP number and other with customer number based on settings in PIDE.
How can we configure this?
Thanks & Regards
PrathibaHi,
I think you are using some IS component in ECC. Hope you are using BUPA_MAIN and BUPA_REL objects for downloading BP's to CRM. In PIDE you do not need to maintain mapping for customer. -
Having issues with custom master pages and device channels
I'm working in Sharepoint 2013 and am attempting to create a custom master page that is to be used by mobile devices. I have created an html file and a custom css file that includes snippets from the design manager. The file appears to preview fine in a
browser from Microsoft Web Expression. I have loaded the html file into sharepoint via design manager, so the master file is there as well. The css files are in the style library for the site collection and I have created a device channel including user agent
strings for iphones going back to the iPhone 4 and operating systems going back to iOS 6. I have obviously assigned my custom "mobile" master for that device channel and I have turned off mobile browsing. However when I open the site on my phone
it shows the normal full desktop view and not my custom master. I will include my html code, my css and a screenshot of my device channel below. Please help!
<?xml version="1.0" encoding="utf-8"?><!--SPG:
This HTML file has been associated with a SharePoint Master Page (.master file) carrying the same name. While the files remain associated, you will not be allowed to edit the .master file, and any rename, move, or deletion operations will be reciprocated.
To build the master page directly from this HTML file, simply edit the page as you normally would. Use the Snippet Generator at https://otterbein.sharepoint.com/sites/Committees/_layouts/15/ComponentHome.aspx?Url=https%3A%2F%2Fotterbein%2Esharepoint%2Ecom%2Fsites%2FCommittees%2F%5Fcatalogs%2Fmasterpage%2Fmobile%5Ftest%5Fmaster%2Emaster to create and customize useful SharePoint entities, then copy and paste them as HTML snippets into your HTML code. All updates to this file will automatically sync to the associated Master Page.
-->
<!-- _lcid="1033" _version="16.0.3611" _dal="1" -->
<!-- _LocalBinding -->
<!DOCTYPE html[]>
<html xmlns:mso="urn:schemas-microsoft-com:office:office" xmlns:msdt="uuid:C2F41010-65B3-11d1-A29F-00AA00C14882">
<head>
<link href="https://otterbein.sharepoint.com/sites/Committees/Style Library/mobile_corev15.css" rel="stylesheet" type="text/css" />
<meta http-equiv="X-UA-Compatible" content="IE=10" />
<!--CS: Start Head Snippet-->
<!--SPM:<%@Register Tagprefix="SharePoint" Namespace="Microsoft.SharePoint.WebControls" Assembly="Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"%>-->
<!--SPM:<%@Register Tagprefix="WebPartPages" Namespace="Microsoft.SharePoint.WebPartPages" Assembly="Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"%>-->
<!--SID:00 -->
<meta name="GENERATOR" content="Microsoft SharePoint" />
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<meta http-equiv="Expires" content="0" />
<!--SPM:<SharePoint:RobotsMetaTag runat="server"/>-->
<!--MS:<SharePoint:PageTitle runat="server">-->
<!--SPM:<asp:ContentPlaceHolder id="PlaceHolderPageTitle" runat="server">-->
<!--SPM:<SharePoint:ProjectProperty Property="Title" runat="server"/>-->
<!--SPM:</asp:ContentPlaceHolder>-->
<!--ME:</SharePoint:PageTitle>-->
<!--SPM:<SharePoint:StartScript runat="server"/>-->
<!--MS:<SharePoint:CssLink runat="server" Version="15">-->
<!--PS: Start Preview-->
<link href="https://otterbein.sharepoint.com/sites/Committees/Style Library/mobile_corev15.css" rel="stylesheet" type="text/css" /><!--PE: End Preview-->
<!--ME:</SharePoint:CssLink>-->
<!--SPM:<SharePoint:CacheManifestLink runat="server"/>-->
<!--SPM:<SharePoint:PageRenderMode runat="server" RenderModeType="Standard"/>-->
<!--SPM:<SharePoint:ScriptLink language="javascript" name="core.js" OnDemand="true" runat="server" Localizable="false"/>-->
<!--SPM:<SharePoint:ScriptLink language="javascript" name="menu.js" OnDemand="true" runat="server" Localizable="false"/>-->
<!--SPM:<SharePoint:ScriptLink language="javascript" name="callout.js" OnDemand="true" runat="server" Localizable="false"/>-->
<!--SPM:<SharePoint:ScriptLink language="javascript" name="sharing.js" OnDemand="true" runat="server" Localizable="false"/>-->
<!--SPM:<SharePoint:ScriptLink language="javascript" name="suitelinks.js" OnDemand="true" runat="server" Localizable="false"/>-->
<!--SPM:<SharePoint:CustomJSUrl runat="server"/>-->
<!--MS:<SharePoint:SoapDiscoveryLink runat="server">-->
<!--PS: Start Preview--><link href="https://otterbein.sharepoint.com/_vti_bin/spsdisco.aspx" rel="alternate" type="text/xml" /><!--PE: End Preview-->
<!--ME:</SharePoint:SoapDiscoveryLink>-->
<!--MS:<SharePoint:AjaxDelta id="DeltaPlaceHolderAdditionalPageHead" Container="false" runat="server">-->
<!--MS:<asp:ContentPlaceHolder id="PlaceHolderAdditionalPageHead" runat="server">-->
<!--ME:</asp:ContentPlaceHolder>-->
<!--MS:<SharePoint:DelegateControl runat="server" ControlId="AdditionalPageHead" AllowMultipleControls="true">-->
<!--ME:</SharePoint:DelegateControl>-->
<!--MS:<asp:ContentPlaceHolder id="PlaceHolderBodyAreaClass" runat="server">-->
<!--ME:</asp:ContentPlaceHolder>-->
<!--ME:</SharePoint:AjaxDelta>-->
<!--SPM:<SharePoint:CssRegistration Name="Themable/corev15.css" runat="server"/>-->
<!--SPM:<SharePoint:AjaxDelta id="DeltaSPWebPartManager" runat="server">-->
<!--SPM:<WebPartPages:SPWebPartManager runat="server"/>-->
<!--SPM:</SharePoint:AjaxDelta>-->
<!--CE: End Head Snippet-->
<!--[if gte mso 9]><xml>
<mso:CustomDocumentProperties>
<mso:ContentType msdt:dt="string">Design File</mso:ContentType>
<mso:ContentTypeId msdt:dt="string">0x0101000F1C8B9E0EB4BE489F09807B2C53288F0054AD6EF48B9F7B45A142F8173F171BD10003D357F861E29844953D5CAA1D4D8A3A</mso:ContentTypeId>
<mso:HtmlDesignAssociated msdt:dt="string">1</mso:HtmlDesignAssociated>
<mso:HtmlDesignFromMaster msdt:dt="string"></mso:HtmlDesignFromMaster>
<mso:HtmlDesignConversionSucceeded msdt:dt="string">True</mso:HtmlDesignConversionSucceeded>
<mso:HtmlDesignStatusAndPreview msdt:dt="string">https://otterbein.sharepoint.com/sites/Committees/_catalogs/masterpage/mobile_test_master.html, Conversion successful.</mso:HtmlDesignStatusAndPreview>
</mso:CustomDocumentProperties>
</xml><![endif]-->
<link href="https://otterbein.sharepoint.com/sites/Committees/Style Library/mobile_corev15.css" rel="stylesheet" type="text/css" />
</head>
<body style="width: 330; margin-right: 0px">
<div id="ms-designer-ribbon" style="width:312px">
<!--SPM:<%@Register Tagprefix="SharePoint" Namespace="Microsoft.SharePoint.WebControls" Assembly="Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"%>-->
<div id="TurnOnAccessibility" style="display:none" class="s4-notdlg noindex">
<a id="linkTurnOnAcc" href="#" class="ms-accessible ms-acc-button" onclick="SetIsAccessibilityFeatureEnabled(true);UpdateAccessibilityUI();document.getElementById('linkTurnOffAcc').focus();return false;">
<!--MS:<SharePoint:EncodedLiteral runat="server" text="<%$Resources:wss,master_turnonaccessibility%>" EncodeMethod="HtmlEncode">-->
<!--ME:</SharePoint:EncodedLiteral>-->
</a>
</div>
<div id="TurnOffAccessibility" style="display:none" class="s4-notdlg noindex">
<a id="linkTurnOffAcc" href="#" class="ms-accessible ms-acc-button" onclick="SetIsAccessibilityFeatureEnabled(false);UpdateAccessibilityUI();document.getElementById('linkTurnOnAcc').focus();return false;">
<!--MS:<SharePoint:EncodedLiteral runat="server" text="<%$Resources:wss,master_turnoffaccessibility%>" EncodeMethod="HtmlEncode">-->
<!--ME:</SharePoint:EncodedLiteral>-->
</a>
</div>
<!--SID:02 {Ribbon Snippet}-->
<!--PS: Start Preview--><!--PE: End Preview-->
</div>
<!--MS:<SharePoint:SPSecurityTrimmedControl runat="server" AuthenticationRestrictions="AnonymousUsersOnly">-->
<!--SPM:<wssucw:Welcome runat="server" EnableViewState="false"/>-->
<!--ME:</SharePoint:SPSecurityTrimmedControl>-->
<div id="s4-workspace" style="left: 0px; top: 0px; width: 329">
<div id="s4-bodyContainer" style="width: 328">
<table style="width: 312px">
<tr>
<td style="width: 312px; background: #666666; text-align:center">
<div class="js-callout-menuAction" style="background:rgb(102, 102, 102); color:white; width:295px; padding:8px; height:64px; overflow:hidden;">In true previews of your site, the SharePoint ribbon will be here.</div></td>
</tr>
<tr>
<td style="width: 312px; background: #CB1920; text-align:center">
<img alt="Otterbein Logo" src="https://otterbein.sharepoint.com/sites/Committees/Style%20Library/otterbein-logo_towers_white_mobile.png" style="padding:5px"><br>
<div data-name="SiteTitle" style="width: 295px; color:white; padding-bottom:5px; text-indent:5px" class="ms-chkmark-container-centerer"><!--CS: Start Site Title Snippet--><!--SPM:<%@Register Tagprefix="SharePoint" Namespace="Microsoft.SharePoint.WebControls" Assembly="Microsoft.SharePoint, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"%>--><!--MS:<SharePoint:AjaxDelta runat="server" ForeColor="White">--><!--PS: Start of READ-ONLY PREVIEW (do not modify)--><!--PE: End of READ-ONLY PREVIEW--><!--MS:<SharePoint:SPLinkButton runat="server" ForeColor="White" NavigateUrl="~site/">--><!--PS: Start of READ-ONLY PREVIEW (do not modify)--><!--PE: End of READ-ONLY PREVIEW--><!--MS:<SharePoint:ProjectProperty runat="server" Property="Title">--><!--PS: Start of READ-ONLY PREVIEW (do not modify)-->
<span style="font-size:xx-large">Committees<!--PE: End of READ-ONLY PREVIEW--><!--ME:</SharePoint:ProjectProperty>--><!--PS: Start of READ-ONLY PREVIEW (do not modify)--><!--PE: End of READ-ONLY PREVIEW--><!--ME:</SharePoint:SPLinkButton>--><!--PS: Start of READ-ONLY PREVIEW (do not modify)--><!--PE: End of READ-ONLY PREVIEW--><!--ME:</SharePoint:AjaxDelta>--><!--CE: End Site Title Snippet--></span>
</div>
<div WebPartID="00000000-0000-0000-0000-000000000000" HasPers="true" id="WebPart" width="250px" class="ms-WPBody noindex " OnlyForMePart="true" allowDelete="false" style="padding-top:15px; padding-bottom:15px"><div componentid="ctl00_ctl03_csr" id="ctl00_ctl03_csr"><div id="SearchBox" name="Control"><div class="ms-srch-sb ms-srch-sb-border" id="ctl00_ctl03_csr_sboxdiv">
<input type="text" value="Search..." maxlength="2048" accessKey="S" title="Search..." id="ctl00_ctl03_csr_sbox" autocomplete="off" autocorrect="off" onkeypress="EnsureScriptFunc('Search.ClientControls.js', 'Srch.U', function() {if (Srch.U.isEnterKey(String.fromCharCode(event.keyCode))) {$find('ctl00_ctl03_csr').search($get('ctl00_ctl03_csr_sbox').value);return Srch.U.cancelEvent(event);}})" onkeydown="EnsureScriptFunc('Search.ClientControls.js', 'Srch.U', function() {var ctl = $find('ctl00_ctl03_csr');ctl.activateDefaultQuerySuggestionBehavior();})" onfocus="EnsureScriptFunc('Search.ClientControls.js', 'Srch.U', function() {var ctl = $find('ctl00_ctl03_csr');ctl.hidePrompt();ctl.setBorder(true);})" onblur="EnsureScriptFunc('Search.ClientControls.js', 'Srch.U', function() {var ctl = $find('ctl00_ctl03_csr'); if (ctl){ ctl.showPrompt(); ctl.setBorder(false);}})" class="ms-textSmall ms-srch-sb-prompt ms-helperText" style="width: 250px; height: 18px" /><a title="Search" class="ms-srch-sb-searchLink" id="ctl00_ctl03_csr_SearchLink" onclick="EnsureScriptFunc('Search.ClientControls.js', 'Srch.U', function() {$find('ctl00_ctl03_csr').search($get('ctl00_ctl03_csr_sbox').value);})" href="javascript: {}"><img src="/sites/Committees/_catalogs/theme/Themed/EF0ED6F1/searchresultui-61174269.themedpng?ctag=55" class="ms-srch-sb-searchImg" id="searchImg" alt="Search" /></a></div></div></div><noscript><div id="ctl00_ctl03_noscript">It looks like your browser does not have JavaScript enabled. Please turn on JavaScript and try again.</div></noscript><div id="ctl00_ctl03" style="color:White;border-color:White;border-width:0px;border-style:Solid;text-align:center;"></div><div class="ms-clear"></div></div>
<div data-name="TopNavigationNoFlyoutWithStartNode"><!--CS: Start Top Navigation Snippet--><!--SPM:<%@Register Tagprefix="SharePoint" Namespace="Microsoft.SharePoint.WebControls" Assembly="Microsoft.SharePoint, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"%>--><!--MS:<SharePoint:AjaxDelta runat="server" CssClass="ms-displayInline ms-core-navigation ms-dialogHidden" Width="312px" BlockElement="True" ID="DeltaTopNavigation">--><!--PS: Start of READ-ONLY PREVIEW (do not modify)--><!--PE: End of READ-ONLY PREVIEW--><!--MS:<SharePoint:DelegateControl runat="server" Id="topNavigationDelegate" ControlId="TopNavigationDataSource">--><!--PS: Start of READ-ONLY PREVIEW (do not modify)--><span style="display:none">
<table cellpadding="4" cellspacing="0" style="font:messagebox;color:buttontext;background-color:buttonface;border: solid 1px;border-top-color:buttonhighlight;border-left-color:buttonhighlight;border-bottom-color:buttonshadow;border-right-color:buttonshadow">
<tr>
<td nowrap="nowrap">
<span style="font-weight:bold">PortalSiteMapDataSource</span> - topSiteMap</td>
</tr>
<tr>
<td></td>
</tr>
</table>
</span><!--PE: End of READ-ONLY PREVIEW--><!--MS:<Template_Controls>--><!--MS:<asp:SiteMapDataSource ShowStartingNode="True" SiteMapProvider="SPNavigationProvider" ID="topSiteMap" runat="server" StartingNodeUrl="sid:1002">--><!--ME:</asp:SiteMapDataSource>--><!--ME:</Template_Controls>--><!--ME:</SharePoint:DelegateControl>--><a name="startNavigation"></a><!--MS:<asp:ContentPlaceHolder ID="PlaceHolderTopNavBar" runat="server">--><!--MS:<SharePoint:AspMenu runat="server" UseSeparateCss="false" AdjustForShowStartingNode="False" StaticDisplayLevels="2" AccessKey="1" SkipLinkText="" ItemWrap="True" EnableViewState="False" MaximumDynamicDisplayLevels="0" UseSimpleRendering="True" DataSourceID="topSiteMap" Orientation="Vertical" ID="TopNavigationMenu">--><!--PS: Start of READ-ONLY PREVIEW (do not modify)-->
<div id="zz7_TopNavigationMenu" class=" noindex ms-core-listMenu-verticalBox">
<ul id="zz9_RootAspMenu" class="root ms-core-listMenu-root static">
<li class="static">
<a class="static menu-item ms-core-listMenu-item ms-displayInline ms-navedit-linkNode" href="/sites/Committees/SitePages/Home.aspx" accesskey="1">
<span class="additional-background ms-navedit-flyoutArrow">
<span class="menu-item-text">Committees</span></span></a></li>
<li class="static ms-verticalAlignTop ms-listMenu-editLink ms-navedit-editArea">
<span class="ms-navedit-editSpan" id="zz7_TopNavigationMenu_NavMenu_Edit">
<a id="zz7_TopNavigationMenu_NavMenu_EditLinks" class="ms-navedit-editLinksText" href="#" onclick="g_QuickLaunchMenu = null; EnsureScriptParams('quicklaunch.js', 'QuickLaunchInitEditMode', 'zz7_TopNavigationMenu', 1, 0, 1, '\u002fSITES\u002fCOMMITTEES'); cancelDefault(event); return false;" title="Edit Links">
<span class="ms-displayInlineBlock">
<span class="ms-navedit-editLinksIconWrapper ms-verticalAlignMiddle">
<img class="ms-navedit-editLinksIcon" src="/sites/Committees/_catalogs/theme/Themed/EF0ED6F1/spcommon-B35BB0A9.themedpng?ctag=55" alt="Edit Links" /></span><span class="ms-metadata ms-verticalAlignMiddle">Edit Links</span></span></a><span id="zz7_TopNavigationMenu_NavMenu_Loading" class="ms-navedit-menuLoading ms-hide"><a id="zz7_TopNavigationMenu_NavMenu_GearsLink" href="#" onclick="HideGears(); return false;" title="This animation indicates the operation is in progress. Click to remove this animated image."><img id="zz7_TopNavigationMenu_NavMenu_GearsImage" src="/_layouts/15/images/loadingcirclests16.gif?rev=38" alt="This animation indicates the operation is in progress. Click to remove this animated image." /></a></span><div id="zz7_TopNavigationMenu_NavMenu_ErrorMsg" class="ms-navedit-errorMsg">
</div>
</span></li>
</ul>
</div>
<!--PE: End of READ-ONLY PREVIEW--><!--ME:</SharePoint:AspMenu>--><!--ME:</asp:ContentPlaceHolder>--><!--PS: Start of READ-ONLY PREVIEW (do not modify)--><!--PE: End of READ-ONLY PREVIEW--><!--ME:</SharePoint:AjaxDelta>--><!--CE: End Top Navigation Snippet-->
</div>
<br>
</td>
</tr>
<tr>
<td style="width: 312px">
<div class="DefaultContentBlock" style="border:medium black solid; background:yellow; color:black;">
This area will be filled in by content you create in your page layouts.
</div>
</td>
</tr>
<tr>
<td style="width: 312px; background:#CCCCCC"><!--CS: Start Content Editor Snippet--><!--SPM:<%@Register Tagprefix="WebPartPages" Namespace="Microsoft.SharePoint.WebPartPages" Assembly="Microsoft.SharePoint, Version=16.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"%>--><!--MS:<WebPartPages:ContentEditorWebPart xmlns:WebPartPages="namespace" runat="server" webpart="true">--><!--PS: Start of READ-ONLY PREVIEW (do not modify)--><div class="ms-webpart-chrome ms-webpart-chrome-fullWidth "><div WebPartID="00000000-0000-0000-0000-000000000000" HasPers="true" id="WebPart" width="312px" class="ms-WPBody noindex " OnlyForMePart="true" allowDelete="false" style=""><div class="ms-rtestate-field"></div></div></div><!--PE: End of READ-ONLY PREVIEW--><!--MS:<WebPart xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://schemas.microsoft.com/WebPart/v2">--><!--MS:<Title>--><!--SPM:$Resources:core,ContentEditorWebPartTitle;--><!--ME:</Title>--><!--MS:<FrameType>--><!--SPM:None--><!--ME:</FrameType>--><!--MS:<Description>--><!--SPM:$Resources:core,ContentEditorWebPartDescription;--><!--ME:</Description>--><!--MS:<IsIncluded>--><!--SPM:true--><!--ME:</IsIncluded>--><!--MS:<ZoneID>--><!--SPM:ImportedPartZone--><!--ME:</ZoneID>--><!--MS:<PartOrder>--><!--SPM:0--><!--ME:</PartOrder>--><!--MS:<FrameState>--><!--SPM:Normal--><!--ME:</FrameState>--><!--MS:<Height>--><!--ME:</Height>--><!--MS:<Width>--><!--ME:</Width>--><!--MS:<AllowRemove>--><!--SPM:true--><!--ME:</AllowRemove>--><!--MS:<AllowZoneChange>--><!--SPM:true--><!--ME:</AllowZoneChange>--><!--MS:<AllowMinimize>--><!--SPM:true--><!--ME:</AllowMinimize>--><!--MS:<AllowConnect>--><!--SPM:true--><!--ME:</AllowConnect>--><!--MS:<AllowEdit>--><!--SPM:true--><!--ME:</AllowEdit>--><!--MS:<AllowHide>--><!--SPM:true--><!--ME:</AllowHide>--><!--MS:<IsVisible>--><!--SPM:true--><!--ME:</IsVisible>--><!--MS:<DetailLink>--><!--ME:</DetailLink>--><!--MS:<HelpLink>--><!--ME:</HelpLink>--><!--MS:<HelpMode>--><!--SPM:Modeless--><!--ME:</HelpMode>--><!--MS:<Dir>--><!--SPM:Default--><!--ME:</Dir>--><!--MS:<PartImageSmall>--><!--ME:</PartImageSmall>--><!--MS:<MissingAssembly>--><!--SPM:Cannot import this Web Part.--><!--ME:</MissingAssembly>--><!--MS:<PartImageLarge>--><!--SPM:/_layouts/15/images/mscontl.gif--><!--ME:</PartImageLarge>--><!--MS:<IsIncludedFilter>--><!--ME:</IsIncludedFilter>--><!--MS:<ExportControlledProperties>--><!--SPM:true--><!--ME:</ExportControlledProperties>--><!--MS:<ConnectionID>--><!--SPM:00000000-0000-0000-0000-000000000000--><!--ME:</ConnectionID>--><!--MS:<ID>--><!--SPM:g_4a85e298_8d8c_4770_9fc1_a5f6d6456ec7--><!--ME:</ID>--><!--MS:<ContentLink xmlns="http://schemas.microsoft.com/WebPart/v2/ContentEditor">--><!--ME:</ContentLink>--><!--MS:<Content xmlns="http://schemas.microsoft.com/WebPart/v2/ContentEditor">--><!--ME:</Content>--><!--MS:<PartStorage xmlns="http://schemas.microsoft.com/WebPart/v2/ContentEditor">--><!--ME:</PartStorage>--><!--MS:<ID>--><!--SPM:g_90f063ab_d6a1_4718_b306_b3ade5119bd1--><!--ME:</ID>--><!--ME:</WebPart>--><!--ME:</WebPartPages:ContentEditorWebPart>--><!--CE: End Content Editor Snippet--></td>
</tr>
</table>
</div>
</div>
</body>
</html>
User agent strings for mobile Channel
Apple-iPhone3C1/1001.403
Apple-iPhone3C3/1001.403
Apple-iPhone4C1/1001.403
Apple-iPhone5C1/1001.405
Apple-iPhone5C2/1001.405
Apple-iPhone2C1/1001.523Hi,
The issue is likely not your HTML Master Page but your user agent string. Try a user agent string of just "iphone". To test your master page, you could also set the user agent to "MSIE", which should cause this master page to load for
any version of IE. This will help you debug the master page as well in your normal browser.
Eric Overfield - PixelMill -
ericoverfield.com -
@EricOverfield
Maybe you are looking for
-
Unable to download BlackBerry Desktop Software on Windows 8
I cannot get BB Desktop to install on my new Windows 8 lap file unzipped itself; asked for the preferred language; Install shield Wizard starts to run. Then I get the below message in a box called "Windows Installer". I click OK and the whole process
-
We just purchased a Macbook for my wife. The out-of-the-box Safari and Firefox software won't load sites like apple.com; huffingtonpost; ebay; yahoo; people.com; and any google searchable images. Huffingtonpost won't load at all. The other sites try
-
Audio offline in Timeline ONLY; Clips appear red (CS6)
Very, very, very frustrating issue. I have a cut of a scene where the audio has all mysteriously gone offline (the clips in the timeline have turned red, rather than green). No audio plays back. Yet when I select "Reveal in Project", it finds the ass
-
Hi All I have designed a form with a textbox and a matrix. I have set CFL for the textbox If select record I have made it to display in the matrix at that time a error appears Invalid Date Value -Anto
-
Logical system names after system copy for SAP ECC 6.0
Hi! We successfully installed SAP ECC 6.0 system as system copy. All the logical system names of old system have been copied to new system. Question What is the approach to change the logical system names for new SAP system? a) just via tcode SCC4 b)