Amarok kde library problem [SOLVED]

After the last update I had problems running amarok on gnome. Trying to start from the terminal returned various lib errors (libkhtml.so.4 , libkdeui etc.) running "pacman -S kdelibs3" seems to solve the problem. Hope it helps if anyone out there having the same issue...

Had the same problem.
kdelibs3 was installed, but I had to reinstall it to fix the problem.

Similar Messages

Teamspeak3 in KDE - microphone problems [SOLVED]

I am in KDE4 (latest version as of now). I chose the GStreamer backend when I installed KDE.
I have a headset, plugged into the rear outlets on my pc.
Sound output works fine.
I installed Teamspeak3 (Linux version, not Wine, but same problem in Windows/Wine version).
I can hear sounds just fine, but it does not register any sound from my microphone.
I went into alsamixer, unmuted everything, turned it up, etc., same problem. There is a 'rear mic' and 'rear mic boost' in the output section of alsamixer. when I turn that up, I can hear the microphone just fine through the headphones, so I know the microphone works and is picking up sound - Teamspeak isn't registering it, though.
The input section of Teamspeak settings shows either default or ALSA for sound system, and whichever I choose, it has two devices under microphone. I've tried all different combinations, no dice.
Any ideas?
Last edited by olorin12 (2014-12-13 02:51:30)

Apparently I didn't do my due diligence.
Teamspeak3 requires Pulseaudio. I installed it, now everything is working fine, both native and Windows/Wine versions.
Leaving this up in case anyone else runs into the same problems.

Acrobat printing problems (solved)

Hi Folk
I'm getting on well with Arch apart from one problem, I can not print from Acrobat reader, it accepts the command and does precisely nothing, the jobs are appearing in cups but not being printed, I can print from Open Office and test print from cups but no cooperation with acrobat, anyone have any ideas? thanks
Pete
Last edited by pete051 (2009-09-29 19:14:12)

I don't know what DE are you using. In my case, I use xfce and when acroread starts with his stupidity I just change the print command to 'xfprint'. That forces acroread to redirect the print job to xfce's printing frontend, and problem solved.
Now, if you're using kde, I guess there is something named 'kdeprint', 'kprint' or similar. For gnome, I've no idea.
I hope this helps.
p.s. Sometimes, cups takes his time to print. When its taking too long I purge cups' temp files and restart the daemon.
Last edited by kjon (2009-09-25 00:32:23)

Ovi Suite 3.0.0.290 - Music library problems...

Hello,
Just bought a Nokia E5, looks to be a sweet phone so far...
Only, Ovi Suite is just annoying. Very slow on communicating with the phone (USB connection) and some big problems.
Impossible to delete music from the library ! How is that ?? And also the library takes ages to add a new folder.
Also, not seeing the playlist i've made on the phone ? Either on mass storage connection, in the playlist folder of the phone, nothing... But should be on a other threat.
Hope you can solve the library problem because it's quite annoying.
Thanks in advance for any answers.

@satari
Yeah, alright already!
We get that without you plastering this message over EVERY single thread dealing with issues of that truly useless and pathetic piece of software called Ovi-Suite.
Especially since the new version DOES NOT SOLVE ANY OF THE ISSUES AT HAND IN THE THREADS YOU MASS PASTED INTO!
Ovi-Suite 3.x still no longer syncs music, which IMHO is a basic function. Who on earth wants to be forced to manually update the phone playlists and songs whenever songs are added on the PC? That is beyond backwards.
Hello? It's 2011, not 1991.
Ovi Suite 3.x still randomly refuses to add songs to the library on the PC (e.g. it skips several songs from an album folder, yet they play fine when added to the phone manually outside Ovi-Suite), an issue that can only be corrected by deleting the entire library on the PC and recreating it. A "repair library" function is notoriously absent.
I'd like a so called Smartphone to make tasks easier and more comfortable instead of harder.
Newer Nokia handsets may be slightly less bad, but the N97 with Ovi-Suite is still the smartphone/desktop combo from hell.
The fruit phone/ITunes combo is sadly restricted by the greed and desire to control everything of Apple, but at least the products work reliably and consistently for the most part. The same is true for 'Droid devices.
Ever seen a black lemon? They turn black when they rot. My N97 is black. 'nuff said

Linux 3.1.9 and HDA ATI SB problem [SOLVED]

I`ve just updated kernel from 3.1.8 to 3.1.9 and now my HDA ATI SB (ALC889 Analog) audio card is now unavailable for system. Any suggestions?
I have KDE, and phonon-gstreamer.
Last edited by RealGecko (2012-01-14 11:38:02)

Well problem solved. Of course it is strange, but.. Before update I installed fluidsynth and enabled to run it as daemon through rc.conf. Then was update and restart after that I had message that my sound card doesn`t work. I was thinking and decided to remove fluidsynth from daemons array. After restart everything works again. The strangest thing is that if I start fluidsynth daemon during system run(/etc/rc.d/fluidsynth start) everything works fine.

Split iPhoto library to solve sluggishness?

Hello, we have 23000 pictures in our iPhoto library. It seems like iPhoto is particularly "burdened" by all the photos (i.e. sluggish at times). At least that's our theory.
We're wondering, provided our theory is correct--if splitting the library into multiple libraries, and then setting iPhoto;s default library just to the most recent pictures would solve its sluggishness?
Would that help, or would anyone have other ideas how to give iPhoto a break from having to load 23000 pics every time we load it?
many thanks!
--sluggish in Dallas

i split the library by creating a new one and them importing the pics I wanted to have ready access to in a streamlined library.
problem is, all my ratings didn't come across in the import. what did I do wrong? I even check the prefs file to ensure ratings and other metadata would be included in the import, but no dice.
any ideas?

Podcast Smart Playlist Problems (Disregard - Problem solved)

Problems solved. Is it possible to delete the post?
Message was edited by: ogman

Reagrding tracks being copied over again, I've seen another post in iPod Lounge where that person indicated the same thing. He stated that the play count was not being updated between the iPod and iTunes, but that the tracks were being copied over again. This sounds like a good explanation of this problem.
I have now noticed many of the tracks which I know I have played in the past show a "0" play count. Are the play counts kept in the iTunes library files (iTunes.xml and iTunes.itl)?
I always save the library files, so that when I reinstall iTunes I can just copy these 2 files back to their proper locations and I have my entire library intact - playlists and all. My music library is on a different drive.
Anyway, I KNOW I have played these tracks on the iPod, and yet they show unplayed on iTunes. This is probably another symptom of the re-copying tracks problem.

I can not write in Hebrew And create effects It shows all distorted When This problem solved?

I can not write in Hebrew
And create effects
It shows all distorted
When This problem solved?

roeisarusi wrote:
When This problem solved?
Nobody knows. iWorks apps have always had bugs that make them unsuitable for Hebrew/Arabic for most people. Tell Apple here:
http://www.apple.com/feedback/keynote.html

How to problem solve adf issue in the mx340 model

how to problem solve adf issue in the mx340 model

Alex,
the missing thing in your example is the fact, that if only one value is selected, the parameter has exact this value like BOSTON. If you choose more than one value, the parameter includes the *'*, so that it looks like *'BOSTON','NEW YORK'*. So you need to check in the package, if there's a *,* in the parameter or not. If yes there's more than one value, if not it's only one value or it's null.
So change your package to (you need to expand your variables)
create or replace package bip_departments_2_parameters
as
p_dep_2_param varchar2(1000);
p_loc_1_param varchar2(1000);
p_where_clause varchar2(1000);
function beforereporttrigger
return boolean;
end bip_departments_2_parameters;
create or replace package body bip_departments_2_parameters
as
function beforereporttrigger
return boolean
is
l_return boolean := true;
begin
p_where_clause := ' ';
if p_dep_2_param is not null then
if instr(p_dep_2_param,',')>0 then
p_where_clause := 'WHERE DNAME in ('||p_dep_2_param||')';
else
p_where_clause := 'WHERE DNAME = '''||p_dep_2_param||'''';
end if;
if p_loc_1_param is not null then
if instr(p_loc_1_param,',')>0 then
p_where_clause := p_where_clause || ' AND LOC IN ('||p_loc_1_param||')';
else
p_where_clause := p_where_clause || ' AND LOC = '''||p_loc_1_param||'''';
end if;
end if;
else
if p_loc_1_param is not null then
if instr(p_loc_1_param,',')>0 then
p_where_clause := p_where_clause || 'WHERE LOC in ('||p_loc_1_param||')';
else
p_where_clause := p_where_clause || 'WHERE LOC = '''||p_loc_1_param||'''';
end if;
end if;
end if;
return (l_return);
end beforereporttrigger;
end bip_departments_2_parameters;
I've written a similar example at http://www.oracle.com/global/de/community/bip/tipps/Dynamische_Queries/index.html ... but it's in german.
Regards
Rainer

The missing library problem.

I understand that there's already a lot of threads about the sudden disappearance of iTunes libraries, however I'm typing this up because I'd like to point out in a bit more detail what I'm seeing happening to my computer, and maybe have a collective of what's going on. This issue has happened to me five times in the last two months since I've updated to iTunes 11. After searching on google I know the missing library problem has existed since the early 2000s; why this glitch has yet to be fixed 13 years later is beyond me. I have personally never had this problem until updating to 11, and seeing the many other threads on here this appears to me to be an issue with this version of the software more than it has been in previous versions.
Before I continue, I have tried the following to fix it:
Simply readded my whole library. It was only wiped again a few weeks later.
Completely uninstalled and reinstalled iTunes. That didn't work either, so it's not just an updating problem.
What I haven't tried
Changing where on my computer iTunes is installed. I have no idea where on the computer might be better or if it will change anything. I have iTunes installed on its default location on my local C: disk.
Importing the music directly from my iPod into iTunes. Can this be done? If so, how? Not everything on my iTunes is a store purchase, most of it is imported CDs and also amazon purchases too. So I don't know if the transfer purchases option works. While this wouldn't fix this current issue, I would like to know how to do this if possible since it would just be a quick fix whenever this happens.
What is happening:
So each time this has happened, what occurs is that like many other people, one day I open my iTunes and everything is in order. Then the next, for no reason, all of my libraries are gone but the music is still on my computer, organized in their files the way iTunes had them done so upon importing. I can't use the .itl files in the "previous libraries" folder because they have also been re-written. Upon opening them, even if their last save was on a day I know everything was in working order, opening them does nothing but give me the same blank default page.
What isn't mentioned in a lot of the posts regarding this issue, is the sudden crop of temporary files in the iTunes folder.
The ones that have cropped up for me personally are the following:
iT 1.tmp
iT 2.tmp
iT 3.tmp
iT 4.tmp
Temp file 1.tmp
Temp file 2. tmp
Those were not there the last time I used iTunes, and they're never there on the days I've used it before and it has worked correctly. However every time my library is wiped, these files suddenly appear without fail, every time. I can't open them, I can't do anything with them except delete them. I believe I remember reading somewhere that this might be an issue regarding with how the program is saving the progress of your library changing, and that the temp files are there until it can "officially" save what has happened to your library. While I didn't change anything in my library in the last couple of weeks, I'm assuming this also counts things like play count.
My own personal opinion
Seeing just how many threads with this issue are popping up, this leads me to believe that this isn't just a problem with my personal computer or my personal install of iTunes 11. These temp files also lead me to believe that as well. In other words, whatever glitch has existed with iTunes since the early 2000s is for some reason running rampant in version 11.
TL;DR:
Please developers, actually look at this library glitch within the program itself. It can't just be an individual user's problem because way too many people are experiencing it.

No worries. You've probably run into one the other threads I've posted to but I'll add my thoughts here anyway...
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. Note that in iTunes 11 an "empty" library may show your past purchases with links to stream or download them.
In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
Alternatively, depending on exactly when and why the library went missing, there may be a more recent .tmp file in the main iTunes folder that can be copied and renamed as iTunes Library.itl to restore the library to an earlier state. Look for a recent .tmp file that is similar in size to the .itl files in the Previous iTunes Libraries folder. If it has happened repeatedly you may want the earliest such file generated since the last iTunes upgrade.
If applicable, see iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device.
I've noticed more of these missing library posts of late and a common factor to most since I started asking is AVG Anti-Virus. It seems in some cases it might be at least part of the reason why the library file disappears. Try excluding the iTunes folder from any AV scanning process.
tt2

WiFi connection problem solved

My intel iMac and MBA had no problem but iPods 3g and 5g did. I had an old Netgear router connected and sitting next to my Airport Express. On a hunch I diconnected the Netgear and created a guest network to replace the one on the Netgear. PROBLEM SOLVED!
Evidently our iPods and boarder's iPhone had problems sorting out the signals and finding the right addresses. Moving the AE to a higher and slightly more central position also helped.
Jim

Same here on a Vodafone PocketWiFi 2.
Tried NetworkManager, wicd, wifi-menu but all have the same issue.
I recently installed Aptosid on another machine and it has the same problem... It also has kernel version 3.9.
All the live CDs I've tried work, even an Arch CD from May works, though a current install does not.
I have no problems connecting to another (wpa2 enterprise) network yet can't on this 3G modem.
I'm hoping this isn't a permanent issue and perhaps an update very soon will fix this.
It seems the only way to fix this for now is to use an old version of Linux. I'm currently running a virtual machine only for the purpose of Internet sharing, very annoying.

Bug fix for Mac book wireless - problem solved!

Aparantly there is a rather large number of folks out there who've discovered this dillema with wireless not working very well at this point on the Macbook.
Well, I can attest there is one very good solution out there for this issue. This application called Sonar Theater from www.sunray.tv includes a bug fix for the wireless connection issues with Macbook in their latest 1.5 release of Sonar Theater.
I downloaded it, put it into my start up folder and waalaa! problem solved. I've haven't any more issues with dropped wireless since - it's been running constantly for over 2 weeks now.
I haven't even attempted to touch my router configuration - don't need to.

Welcome to the better life of Macs. I am using Sonar Theater too and it's been working very well for me. In fact, I'm getting hooked on just texting a message to my Mac book to fire up user sessions now. I think if you give the Mac Book some time however, you'll find that there really is no comparison to PC's. Your life overall is going to just keep getting better as you dig in to the resources available to new Mac users.
I'm sure it seems confusing to PC users at first, but here's how to set up any application as part of your startup sequence. It really is extremely easy and simple compared to the PC world. Oh and by the way, in reality, Mac users refer to this as your login sequence. So, at login time, you can do a multitude of different things for each user account you might want to set up. Naturally, you can choose to share or not share applications and data between these user accounts on your Mac too....
Mac OS X 10.3 or later
1. Log in as the user who wishes to have a login item or as an admin user.
2. Choose System Preferences from the Apple menu.
3. Choose Accounts from the View menu.
4. Click the name of the user.
5. Click the Startup Items button
6. Click the "Add {+}" button.
The item you selected will automatically open the next time you log in.
there are several ways to get good info from the apple community on tips and tricks as well. you should just try the apple os x web site...here,
http://www.apple.com/macosx/resources/
happy mac-ing!

Mediawiki, mysql, php? problems [SOLVED]

On Sunday my Arch install that is hosted by Slicehost became unresponsive to them so they had to do an emergency reboot. After it came back up my install of mediawiki was (and still is) only returning a blank page (at least in Firefox). After some digging I found out that part of the problem was that mysqld wasn't starting so I managed to get that fixed by commenting out the lines relating to innodb and putting in skip-innodb into my.cnf. But I'm still getting a blank page.
According to Mediawiki's manual, "A blank white page indicates a PHP error which isn't being printed to the screen." They give two lines to put into LocalSettings.php to force error messages but after doing that I'm still getting a blank page. Changing display_errors in php.ini to ON didn't have any effect. When I load the wiki in Safari I get the following error: "Got java.io.EOFException (Server closed connection while sending the HTTP header.): http://some_url.com/mediawiki/index.php/Main_Page". I have no idea what this error means and googling java.io.EOFException doesn't bring up anything very helpful. My PHP Test Page indicates that PHP is up and running.
Any ideas on fixes or where I can find more clues?
[EDIT]
Mysql was definitely the root of the problems with Mediawiki. I tried nearly every suggestion listed in the forums for fixing a mysql install that wouldn't start but nothing worked. I even completely uninstalled mysql and reinstalled it but it still refused to start. I switched over to postgresql and switched mediawiki to run with that. Problem solved.
Last edited by k_odoma (2009-05-23 01:48:35)

There are some other things that must be done to connect to
the database
(such as passing the usernamee, password, and host info to
mysql_connect()
and storing the connection resource), and those might be in
the include
files. I generally place all of the connection parameters in
a separate file
that is located in a folder that can't be accessed by a
browser, for
security purposes.
Paul Swanson
Portland, Oregon, USA
"Amy Blankenship *AdobeCommunityExpert*"
<[email protected]>
wrote in message news:edk6ui$69c$[email protected]..
> What's in the include(s)?
>
> "83Dons" <[email protected]> wrote in
message
> news:edk5s5$4uk$[email protected]..
> > Here is the php code for the 'read' and 'write'
parts:
> >
> >
> >
> > <?php
> > include '......';
> > mysql_select_db('clinskills') or die("UNABLE TO
CONNECT TO
DATABASE");
> > $sql = "select A1Answer from authorware where id =
'13'";
> > $result = mysql_query($sql);
> > $answer1 = mysql_result($result,0,"A1Answer");
> > print $answer1;
> > ?>
> >
> > <?php
> > include '............';
> > mysql_select_db('clinskills') or die("UNABLE TO
CONNECT TO
DATABASE");
> > $newdata = $_GET['data'];
> > mysql_query("insert into authorware (A1Answer)
values('$newdata')")
or
> > die(mysql_error());
> > mysql_close(); ?>
> >
>
>

Stuck with grub problem (SOLVED)

Today i tried to upgrade my Arch Linux, it downloaded everything that should be downloaded, it was installing upgrades but at the installing grub it stucks as like this
"Copying /boot/grub/grub.cfg.pacsave to /boot/grub/grub.cfg"
I've waited it for about 15 minutes, it didn't move on. So i did ctrl+z to break. Then i tried to update again. But it gives an error which is:
error: failed to commit transaction (conflicting files)
python: /usr/bin/2to3 exists in filesystem
Error occured, no packages were upgraded.
Please help me guys!
Last edited by bilgee0629 (2011-03-21 10:36:28)

Problem solved by moving 2to3 to other directory.

Dr.Watson problems solved.

DR.WATSON PROBLEMS SOLVED:
System:
WLS 5.1 with SP11 running on NT4 Using OCI817_8.
Oracle 7.3.4 running on NT4.
Problems:
Dr.Watson exceptions in native code...
# An EXCEPTION_ACCESS_VIOLATION exception has been detected in native code outside
the VM.
# Program counter=0x60239689
When asking BEA and Oracle:
"Use the latest OCI available. It is backward compatible !"
What have been done to solve the problem:
Going through all SQL code (and doing some rewriting), configuring connection
pools (TestOnReserve / TestOnRelease, refresh, etc) and several other configurations...
At last, we tried to change to the OCI version matching the Oracla versions we
were connecting to (from OCI817_8 to OCI734_7).
Voila ! NO MORE DR.WATSON EXCEPTIONS !
Our conclusion:
If possible, use the OCI version that matches the Oracle version you are running
on.

Hi Abhijit
Couple of pointers which could resolve the issue:
1. Since you are using the JDBC-ODBC bridge what occurs internally is that your JDBC API through the Virtual Machine make calls into the ODBC API on your Windows system. So the Watson error that you are getting is probably an illegal access by one of the methods in the ODBC API - this is for the Diagnosis part.
2. The Solution part -
a. Should I change my JDBC-ODBC driver? Not necessarily because the problems could be with the ODBC interface implementation and changing the driver might not help.
b. Should I change my programming style? This is one thing which could really help. The problem with creating connections each time is that it takes a lot of resources to do it, So there is a performance degradation. What you could do inyour code is use a Java Bean to create the required Connection. You can also think of using a prepared statement appropriately encapsulate it since you are invoking a particular query repeatedly. In your JSP page you can retrive(create) this bean through the jsp:useBean tag with the session as the scope attribute. The <jsp:setProperty methods could also be used to set the DSN name and the driver.
Once this bean is successfully created you have an open connection.
Now for the part you have pasted - replace the create connections with getting a new Statement object which would hold your Query. At the end of the JSP just close the Statement object.
Once you are done updating the page you may transfer the control to a different JSP - Let that transfer trigger the connection close in the Java bean.
This should solve the Dr.Watson problem.
Good Luck!
Eshwar Rao
Developer Technical Support
Sun microsystems inc
http://www.sun.com/developers/support

Amarok kde library problem [SOLVED]

Similar Messages

Maybe you are looking for