Amazon AWS problem with client instalation
Hello,
We installed without problems the server and the client tools in our AWS server with amazon, but when we try to install the client tools in workstation, the installer can't locate the license server, as image shows, can anybody help us with the issue?
Best Regards,
Hi,
Please turn off fire wall and anti virus if any. Also check below threads:
http://scn.sap.com/thread/2087758
SAP Business One Client Installation Problem | SCN
Thanks & Regards,
Nagarajan
Similar Messages
-
Problems with client site assignment
Hello,
previously I did not have problems with clients on my test computers, both have WinXP SP3. I am testing migration scenarios. One computer is virtual, one is real computer. After successful migration to Win7, I decided to make another test and changed state
of computers back to with WinXP installed, rejoined to domain, removed from SCCM, discovered again. And I pushed agent installation. Now both computers have problems, I see following in the LocationServices.log: "Failed to verify message. Sending MP [SCCMserver]
not in cached MPlist".
But agent was installed on both, has status Yes in the console, but Software Center is not installed.
Please help.Hi,
I did not find errors in the end of ccmsetup.log:
File C:\WINDOWS\ccmsetup\{4D87A80B-6971-43EF-A59F-8088D214378A}\client.msi installation succeeded.
Successfully deleted the ccmsetup service
A Fallback Status Point has not been specified. Message with STATEID='400' will not be sent.
Deleted file C:\WINDOWS\ccmsetup\ccmsetup.xml
CcmSetup is exiting with return code 0
But across the log some errors:
MSI: Action 16:10:48: SmsGenerateFailureMIF.
MSI: Action 16:10:51: CcmRegisterEndpointRollback. In the event of a failed installation, this action rolls back the changes from CcmRegisterEndpoint. -
Exchange Server 2010 SP3 - Rollup 8 - Issue - Problems with client connections - MS Outlook 2013
Exchange Server 2010 SP3 - Rollup 8 - Issue - Problems with client connections - MS Outlook 2013
Detected Problems:
- Access denied for attached mailbox (department mailbox)
- Access denied for delete or move messages on own mailbox
- Can't send new messages with error (Error: [0x80004005-00000000-00000000])
Solution:
- Rollback to Exchange 2010 SP3 - Rollup 7
- You can rollback to Exchange 2010 SP3 - RollUp 7 in 30 min
Algunos de los destinatarios no recibieron su mensaje.
Asunto: Hola
Enviado el: 11/12/2014 8:35
No se puede localizar a los destinatarios siguientes:
'[email protected]' en 11/12/2014 8:35
Este mensaje no se pudo enviar. Inténtelo de nuevo más tarde, o póngase en contacto con el administrador de red.
Error: [0x80004005-00000000-00000000].See the following forum thread:
https://social.technet.microsoft.com/Forums/en-US/1be9b816-b0ab-40ea-a43a-446239f8eae3/outlook-client-issues-following-exchange-2010-rollup-8 -
Problem with client P6 install
I installed P6 project client and server on a workstation and server and they work ok. However when i attempted to perform a import i got the error below:
The problem is that the default port 1433 being used on the client is wrong.
When i go to help-> About Primavera ->system, i see :
BRE Database: com.microsoft.sqlserver.jdbc.SQLServerDriver, jdbc:sqlserver://FYITESTSVR:1433;database=PMDB_P6V7; (, 7.0, INTERNAL_PLUGINS)
But on the server, the TCP/TP properties , "TCP dynamic ports" is set to port 3574
The strange thing is i did the client install on the server,to test, and the app is using the port 3574.
Am i missing a step in the client install on a workstation, that requires you set the correct port? Can you port be changed on the client side?
thanks for the help
Kes
com.microsoft.sqlserver.jdbc.SQLServerException: The TCP/IP connection to the host FYITESTSVR, port *1433* has failed. Error: "Connection refused: connect. Verify the connection properties, check that an instance of SQL Server is running on the host and accepting TCP/IP connections at the port, and that no firewall is blocking TCP connections to the port.".
at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(SQLServerException.java:170)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.connectHelper(SQLServerConnection.java:1049)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.login(SQLServerConnection.java:833)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.connect(SQLServerConnection.java:716)
at com.microsoft.sqlserver.jdbc.SQLServerDriver.connect(SQLServerDriver.java:841)
at java.sql.DriverManager.getConnection(Unknown Source)
at java.sql.DriverManager.getConnection(Unknown Source)
at com.primavera.infr.db.PrivUserResolver.<init>(PrivUserResolver.java:102)
at com.primavera.infr.admin.CfgAccessMgr.a(CfgAccessMgr.java:101)
at com.primavera.infr.admin.CfgAccessMgr.<init>(CfgAccessMgr.java:78)
at com.primavera.integration.app.importexport.ImportExportAction.do(Unknown Source)
at com.primavera.integration.app.importexport.ImportExportAction.for(Unknown Source)
at com.primavera.integration.app.importexport.ImportExportMain.main(Unknown Source)Thanks a mil.
according to note 913032.1 , i ran the following command and fixed the problem with importing.
INSERT into SETTINGS (namespace, setting_name, setting_value) values ('Administrator_Settings', 'JdbcConnectionURL', 'jdbc:sqlserver://FYITESTSVR:3574;database=PMDB_P6V7;');
Didn't even realize the claim digger app was not working. That was fixed too.
thanks -
Installation problem with already installed apache, help!
Alright, I have oracle 9i client installed on a windows 2000 machine. I'm admin (it is a laptop that dual boots Solaris and Windows 2000). I also had apache 2 and tomcat with jk2 connector. Normally I run a web app off of this laptop, connecting to a remote db. I'm also using HTML DB on Sun machines.
I figured I'd give XE a spin. Too bad there's no solaris version, makes it harder to figure out if something goes wrong.
So I installed and it found some ports already in use. It did assign new ports. But in the end, it didn't connect to the home page.
I figured I'd stop apache and tomcat. I then uninstalled and reinstalled. No port conflict this time, but in the end, it didn't connect to the home page.
If I look at services, 3 XE are running, plus MTSrecovery and OraHome92ClientCache. OracleJobSchedulerXE is disabled. I enabled and started too just in case, but it made no difference.
If I run SQL command line, I can connect as sysdba and all that, so the database is up. Just not the web service. I get a connection refused.
I made sure I didn't have a putty tunnel or anything similar active. If I restart tomcat, it has no problem serving on 8080.
Any suggestions as to where to go next?
FrancoisWell, two things that can happen and happened to me:
1 - ran out of disk space. One tablespace missing. I dont remember the exact error thru oracle, but the install didn't give me any at all. That was the original issue. For those that are getting that ftp screen, there is a good chance it is because you ran out of disk space.
2 - database went in recovery mode (what caused that I'm not sure) the second time around, altough I had 2GB free on C:\. I ended up freeing another 500mb and stopping antivirus, update, sync, apache, tomcat etc Uninstalled one more time and that time the install went through. I might end up reenabling stuff one at a time and do many uninstall/reinstall to try to identify what is the problem. This is a Pentium M 1.6GHz, so I doubt the issue was about CPU cycles.
In both cases, no error messages at install time.
Unfortunately I didn't keep the logs, but as far as a hint, let me mention this:
in c:\oraclexe\app\oracle\admin\XE\bdump\
there is an alert_xe.log file which can reveal a lot of interesting things.
Also, check how much free space you have left after install.
Francois -
8i Listener Problem with client
Hi
I'm having problems with our Linux 8i server.
Software has been installed ok and I can get client connections with a
freshly started listener (LSNRCTL start) using the DBA studio client.
Once I disconnect and then attempt to reconnect I get a "Target not found"
error. But, if I restart the listener on the server then try to connect
again all is fine.telnet is ok the port is open and ready.
I have some more information below that I think is causing my problem
When I start the listener I get
TNSLSNR for Linux: Version 8.1.6.0.0 - Production
System parameter file is
/u01/ora8/app/oracle/8i_8.1.6/network/admin/listener.ora
Log messages written to
/u01/ora8/app/oracle/8i_8.1.6/network/log/listener.log
Listening on:
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=holly.mv)(PORT=1521)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC)))
Connecting to
(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=holly.mv)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 8.1.6.0.0 - Production
Start Date 23-AUG-2000 09:23:48
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security OFF
SNMP ON
Listener Parameter File
/u01/ora8/app/oracle/8i_8.1.6/network/admin/listener.ora
Listener Log File
/u01/ora8/app/oracle/8i_8.1.6/network/log/listener.log
Services Summary...
PLSExtProc has 1 service handler(s)
ora8 has 1 service handler(s)
The command completed successfully
***EOF
For around 50 -65 seconds after this I can connect and reconnect etc
After this time if I do a lsnrctl status I get ( Note the 3 extra
handlers
on ora8 )
LSNRCTL for Linux: Version 8.1.6.0.0 - Production on 23-AUG-2000 09:24:39
(c) Copyright 1998, 1999, Oracle Corporation. All rights reserved.
Connecting to
(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=holly.mv)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 8.1.6.0.0 - Production
Start Date 23-AUG-2000 09:23:48
Uptime 0 days 0 hr. 0 min. 51 sec
Trace Level off
Security OFF
SNMP ON
Listener Parameter File
/u01/ora8/app/oracle/8i_8.1.6/network/admin/listener.ora
Listener Log File
/u01/ora8/app/oracle/8i_8.1.6/network/log/listener.log
Services Summary...
PLSExtProc has 1 service handler(s)
ora8 has 1 service handler(s)
ora8 has 3 service handler(s)<======== ???????
The command completed successfully
***EOF
Once these extra handlers appear, I can no longer connect to the server.
Here is my listener.ora file
# LISTENER.ORA Configuration
File:/u01/ora8/app/oracle/8i_8.1.6/network/admin/listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = holly.mv)(PORT = 1521))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /u01/ora8/app/oracle/8i_8.1.6)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = ora8)
(ORACLE_HOME = /u01/ora8/app/oracle/8i_8.1.6)
(SID_NAME = ora8)
***EOF
Any ideas on if this is related to my problem
Regards
Andrew
nullThe client debug is a good place to start and here is a document explaining that process.
http://www.cisco.com/en/US/products/hw/wireless/ps430/products_tech_note09186a008091b08b.shtml
You many want to do dot11 debugs as well. But sniff the air first and see what activity you see... Also check your clients for a possible misconfig. -
Urgent : Problem with Client when OC4J has been setup in 2 way SSL mode
This is the output that is generated in the JDeveloper console on running the example from b14429.pdf. Examle :
====================================================
import HTTPClient.HTTPConnection;
import HTTPClient.HTTPResponse;
import javax.security.cert.X509Certificate;
import oracle.security.ssl.OracleSSLCredential;
import java.io.IOException;
import javax.net.ssl.SSLPeerUnverifiedException;
public class SSLSocketClientWithClientAuth {
public static void main(String[] args) {
if (args.length < 4) {
System.out.println("Usage: java HTTPSConnectionTest [host] [port] " +
"[wallet] [password]");
System.exit(-1);
String hostname = args[0].toLowerCase();
int port = Integer.decode(args[1]).intValue();
String walletPath = args[2];
String password = args[3];
HTTPConnection httpsConnection = null;
OracleSSLCredential credential = null;
try {
httpsConnection = new HTTPConnection("https", hostname, port);
} catch (IOException e) {
System.out.println("HTTPS Protocol not supported");
System.exit(-1);
try {
credential = new OracleSSLCredential();
credential.setWallet(walletPath, password);
} catch (IOException e) {
System.out.println("Could not open wallet");
System.exit(-1);
httpsConnection.setSSLEnabledCipherSuites(new String[]{"SSL_RSA_WITH_3DES_EDE_CBC_SHA"});
httpsConnection.setSSLCredential(credential);
try {
httpsConnection.connect();
} catch (IOException e) {
System.out.println("Could not establish connection");
e.printStackTrace();
System.exit(-1);
// X509Certificate x509 = new X509Certificate();
//javax.servlet.request.
X509Certificate[] peerCerts = null;
try {
peerCerts =
(httpsConnection.getSSLSession()).getPeerCertificateChain();
} catch (javax.net.ssl.SSLPeerUnverifiedException e) {
System.err.println("Unable to obtain peer credentials");
e.printStackTrace();
System.exit(-1);
String peerCertDN =
peerCerts[peerCerts.length - 1].getSubjectDN().getName();
peerCertDN = peerCertDN.toLowerCase();
if (peerCertDN.lastIndexOf("cn=" + hostname) == -1) {
System.out.println("Certificate for " + hostname +
" is issued to " + peerCertDN);
System.out.println("Aborting connection");
System.exit(-1);
try {
HTTPResponse rsp = httpsConnection.Get("/");
System.out.println("Server Response: ");
System.out.println(rsp);
} catch (Exception e) {
System.out.println("Exception occured during Get");
e.printStackTrace();
System.exit(-1);
================================================================
C:\j2sdk1.4.2_09\bin\javaw.exe -client -classpath "D:\eclipse\workspace\OC4JClient\OC4JClient\classes;D:\eclipse\workspace\jdev\extensions\.jar;C:\Documents and Settings\nilesh_bafna\Desktop\Nitin\lib\jssl-1_1.jar;E:\product\10.1.3.1\OracleAS_1\j2ee\home\lib\http_client.jar;E:\product\10.1.3.1\OracleAS_1\jlib\javax-ssl-1_1.jar" -Djava.protocol.handler.pkgs=HTTPClient -Djavax.net.debug=ssl -Djavax.net.ssl.keyStore=F:/oc4jcert/client.keystore -Djavax.net.ssl.keyStorePassword=welcome1 -Djavax.net.ssl.trustStore=F:/oc4jcert/client.keystore -Djavax.net.ssl.trustStorePassword=welcome1 -DOracle.ssl.defaultCipherSuites=SSL_RSA_WITH_RC4_128_MD5 SSLSocketClientWithClientAuth ps4372.persistent.co.in 443 F:/oc4jcert/client.keystore welcome1
keyStore is : F:/oc4jcert/client.keystore
keyStore type is : jks
init keystore
init keymanager of type SunX509
found key for : oracle-client
chain [0] = [
Version: V3
Subject: CN=ps4372.persistent.co.in, OU=Marketing, O=Oracle, L=Atlanta, ST=Georgia, C=US
Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: SunJSSE RSA public key:
public exponent:
010001
modulus:
87fcc8e9 0ffcef8e 61f3be10 be7c9715 2792849b 3bbdeb1c cc76b337 4b82bbab
86972c63 9af3adfd 35b5df99 9078a0d1 6dc760d8 0549a95a bfa7648a 9eadd326
a6bc4b61 d8f8b42f 44e0b178 ff1dee20 db8406cd d800c26a 9c5a6ed9 4d6f2aef
bc919814 3b46be39 e129280c e83afe12 c9d4e3d7 fb5787b1 d98bed4a 4f0833d5
Validity: [From: Thu Jan 18 21:18:14 GMT+05:30 2007,
To: Wed Apr 18 21:18:14 GMT+05:30 2007]
Issuer: CN=ps4372.persistent.co.in, OU=Marketing, O=Oracle, L=Atlanta, ST=Georgia, C=US
SerialNumber: [ 45af96be]
Algorithm: [MD5withRSA]
Signature:
0000: 41 47 35 41 90 10 E3 77 A7 F3 F5 81 37 49 4F 57 AG5A...w....7IOW
0010: 01 11 82 A2 FB 69 46 E8 18 6C EE 11 23 A6 67 2E .....iF..l..#.g.
0020: 68 4D D6 A6 E7 09 45 24 58 18 9A E5 44 49 10 9B hM....E$X...DI..
0030: F1 EC 99 4A 45 5F A4 4F 71 3F 05 3D 45 29 42 CD ...JE_.Oq?.=E)B.
0040: 11 87 DA 0C AA DC 55 4E CF 22 4A 94 85 CB E5 EB ......UN."J.....
0050: BA E1 10 D2 C8 80 2C 6B 65 94 13 01 1F 6E 18 C3 ......,ke....n..
0060: 87 33 8C 65 C7 03 16 03 24 FB 0D B0 6D D8 E7 AA .3.e....$...m...
0070: A1 A5 48 90 0D D6 8C 47 50 2A AA 7C 7B 14 E5 B7 ..H....GP*......
trustStore is: F:\oc4jcert\client.keystore
trustStore type is : jks
init truststore
adding as trusted cert:
Subject: CN=ps4372.persistent.co.in, OU=Marketing, O=Oracle, L=Atlanta, ST=Georgia, C=US
Issuer: CN=ps4372.persistent.co.in, OU=Marketing, O=Oracle, L=Atlanta, ST=Georgia, C=US
Algorithm: RSA; Serial number: 0x45af96be
Valid from Thu Jan 18 21:18:14 GMT+05:30 2007 until Wed Apr 18 21:18:14 GMT+05:30 2007
adding as trusted cert:
Subject: CN=ps4372.persistent.co.in, OU=Marketing, O=Oracle, L=Atlanta, ST=Georgia, C=US
Issuer: CN=ps4372.persistent.co.in, OU=Marketing, O=Oracle, L=Atlanta, ST=Georgia, C=US
Algorithm: RSA; Serial number: 0x45af95dc
Valid from Thu Jan 18 21:14:28 GMT+05:30 2007 until Wed Apr 18 21:14:28 GMT+05:30 2007
init context
trigger seeding of SecureRandom
done seeding SecureRandom
%% No cached client session
*** ClientHello, TLSv1
RandomCookie: GMT: 1152299454 bytes = { 41, 212, 166, 48, 109, 77, 185, 232, 204, 95, 158, 141, 60, 96, 196, 172, 49, 19, 49, 22, 222, 234, 47, 76, 27, 130, 5, 176 }
Session ID: {}
Cipher Suites: [SSL_RSA_WITH_RC4_128_MD5, SSL_RSA_WITH_RC4_128_SHA, TLS_RSA_WITH_AES_128_CBC_SHA, TLS_DHE_RSA_WITH_AES_128_CBC_SHA, TLS_DHE_DSS_WITH_AES_128_CBC_SHA, SSL_RSA_WITH_3DES_EDE_CBC_SHA, SSL_DHE_RSA_WITH_3DES_EDE_CBC_SHA, SSL_DHE_DSS_WITH_3DES_EDE_CBC_SHA, SSL_RSA_WITH_DES_CBC_SHA, SSL_DHE_RSA_WITH_DES_CBC_SHA, SSL_DHE_DSS_WITH_DES_CBC_SHA, SSL_RSA_EXPORT_WITH_RC4_40_MD5, SSL_RSA_EXPORT_WITH_DES40_CBC_SHA, SSL_DHE_RSA_EXPORT_WITH_DES40_CBC_SHA, SSL_DHE_DSS_EXPORT_WITH_DES40_CBC_SHA]
Compression Methods: { 0 }
main, WRITE: TLSv1 Handshake, length = 73
main, WRITE: SSLv2 client hello message, length = 98
main, READ: TLSv1 Handshake, length = 839
*** ServerHello, TLSv1
RandomCookie: GMT: 1152299454 bytes = { 206, 186, 162, 116, 179, 72, 44, 198, 189, 25, 70, 227, 170, 235, 83, 186, 152, 49, 194, 222, 248, 3, 191, 170, 248, 95, 134, 35 }
Session ID: {69, 175, 178, 190, 47, 141, 131, 115, 241, 226, 39, 29, 241, 65, 235, 165, 57, 40, 52, 85, 68, 85, 68, 84, 108, 141, 1, 125, 193, 191, 158, 208}
Cipher Suite: SSL_RSA_WITH_RC4_128_MD5
Compression Method: 0
%% Created: [Session-1, SSL_RSA_WITH_RC4_128_MD5]
** SSL_RSA_WITH_RC4_128_MD5
*** Certificate chain
chain [0] = [
Version: V3
Subject: CN=ps4372.persistent.co.in, OU=Marketing, O=Oracle, L=Atlanta, ST=Georgia, C=US
Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: SunJSSE RSA public key:
public exponent:
010001
modulus:
6f24d75b 96919725 ad6ea93a cab0bd96 a49d2f3c e14f5c09 0e228e36 de64e0f2
f2b82740 1653bdb4 5024d281 21ed8c4c 89bc322b 4dc9ffb2 0e97cd95 16e6fe1e
380340c9 f3c67e2c 18d06461 f4f30eaf 4394716e 7bc66d80 810a9cb5 9c168b36
cdd99919 67074ebc edebf02e ebf0accb 2193bc38 7ae1cdda af5ff300 ed0e7763
Validity: [From: Thu Jan 18 21:14:28 GMT+05:30 2007,
To: Wed Apr 18 21:14:28 GMT+05:30 2007]
Issuer: CN=ps4372.persistent.co.in, OU=Marketing, O=Oracle, L=Atlanta, ST=Georgia, C=US
SerialNumber: [ 45af95dc]
Algorithm: [MD5withRSA]
Signature:
0000: 05 4E EE 12 5B DD 7F 26 92 37 67 C9 D0 73 46 4D .N..[..&.7g..sFM
0010: 7E A5 1E 67 38 06 D9 5F 9F B7 2F E8 F6 9E BF 88 ...g8.._../.....
0020: 01 31 7D EA 42 5E 4F 9E D7 8F DA 9F 94 A5 EF 47 .1..B^O........G
0030: E3 E9 BA DE 94 15 C6 03 DE C9 C0 7D CE 58 C0 27 .............X.'
0040: 0F 1A 66 EC 73 53 5D 1D DE 7E FA 35 15 E0 2A CC ..f.sS]....5..*.
0050: C9 74 CC 58 E9 B6 2F 68 A0 89 2B F3 E6 61 7D E1 .t.X../h..+..a..
0060: 21 AF BE E8 83 49 B1 BD 36 C5 2D 1B 0D A1 0E 63 !....I..6.-....c
0070: 02 4A 82 71 B0 E1 9C AD 55 67 F9 17 A5 96 18 EB .J.q....Ug......
Found trusted certificate:
Version: V3
Subject: CN=ps4372.persistent.co.in, OU=Marketing, O=Oracle, L=Atlanta, ST=Georgia, C=US
Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: SunJSSE RSA public key:
public exponent:
010001
modulus:
6f24d75b 96919725 ad6ea93a cab0bd96 a49d2f3c e14f5c09 0e228e36 de64e0f2
f2b82740 1653bdb4 5024d281 21ed8c4c 89bc322b 4dc9ffb2 0e97cd95 16e6fe1e
380340c9 f3c67e2c 18d06461 f4f30eaf 4394716e 7bc66d80 810a9cb5 9c168b36
cdd99919 67074ebc edebf02e ebf0accb 2193bc38 7ae1cdda af5ff300 ed0e7763
Validity: [From: Thu Jan 18 21:14:28 GMT+05:30 2007,
To: Wed Apr 18 21:14:28 GMT+05:30 2007]
Issuer: CN=ps4372.persistent.co.in, OU=Marketing, O=Oracle, L=Atlanta, ST=Georgia, C=US
SerialNumber: [ 45af95dc]
Algorithm: [MD5withRSA]
Signature:
0000: 05 4E EE 12 5B DD 7F 26 92 37 67 C9 D0 73 46 4D .N..[..&.7g..sFM
0010: 7E A5 1E 67 38 06 D9 5F 9F B7 2F E8 F6 9E BF 88 ...g8.._../.....
0020: 01 31 7D EA 42 5E 4F 9E D7 8F DA 9F 94 A5 EF 47 .1..B^O........G
0030: E3 E9 BA DE 94 15 C6 03 DE C9 C0 7D CE 58 C0 27 .............X.'
0040: 0F 1A 66 EC 73 53 5D 1D DE 7E FA 35 15 E0 2A CC ..f.sS]....5..*.
0050: C9 74 CC 58 E9 B6 2F 68 A0 89 2B F3 E6 61 7D E1 .t.X../h..+..a..
0060: 21 AF BE E8 83 49 B1 BD 36 C5 2D 1B 0D A1 0E 63 !....I..6.-....c
0070: 02 4A 82 71 B0 E1 9C AD 55 67 F9 17 A5 96 18 EB .J.q....Ug......
*** CertificateRequest
Cert Types: RSA, DSS,
Cert Authorities:
<CN=ps4372.persistent.co.in, OU=Marketing, O=Oracle, L=Atlanta, ST=Georgia, C=US>
*** ServerHelloDone
matching alias: oracle-client
*** Certificate chain
chain [0] = [
Version: V3
Subject: CN=ps4372.persistent.co.in, OU=Marketing, O=Oracle, L=Atlanta, ST=Georgia, C=US
Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: SunJSSE RSA public key:
public exponent:
010001
modulus:
87fcc8e9 0ffcef8e 61f3be10 be7c9715 2792849b 3bbdeb1c cc76b337 4b82bbab
86972c63 9af3adfd 35b5df99 9078a0d1 6dc760d8 0549a95a bfa7648a 9eadd326
a6bc4b61 d8f8b42f 44e0b178 ff1dee20 db8406cd d800c26a 9c5a6ed9 4d6f2aef
bc919814 3b46be39 e129280c e83afe12 c9d4e3d7 fb5787b1 d98bed4a 4f0833d5
Validity: [From: Thu Jan 18 21:18:14 GMT+05:30 2007,
To: Wed Apr 18 21:18:14 GMT+05:30 2007]
Issuer: CN=ps4372.persistent.co.in, OU=Marketing, O=Oracle, L=Atlanta, ST=Georgia, C=US
SerialNumber: [ 45af96be]
Algorithm: [MD5withRSA]
Signature:
0000: 41 47 35 41 90 10 E3 77 A7 F3 F5 81 37 49 4F 57 AG5A...w....7IOW
0010: 01 11 82 A2 FB 69 46 E8 18 6C EE 11 23 A6 67 2E .....iF..l..#.g.
0020: 68 4D D6 A6 E7 09 45 24 58 18 9A E5 44 49 10 9B hM....E$X...DI..
0030: F1 EC 99 4A 45 5F A4 4F 71 3F 05 3D 45 29 42 CD ...JE_.Oq?.=E)B.
0040: 11 87 DA 0C AA DC 55 4E CF 22 4A 94 85 CB E5 EB ......UN."J.....
0050: BA E1 10 D2 C8 80 2C 6B 65 94 13 01 1F 6E 18 C3 ......,ke....n..
0060: 87 33 8C 65 C7 03 16 03 24 FB 0D B0 6D D8 E7 AA .3.e....$...m...
0070: A1 A5 48 90 0D D6 8C 47 50 2A AA 7C 7B 14 E5 B7 ..H....GP*......
JsseJCE: Using JSSE internal implementation for cipher RSA/ECB/PKCS1Padding
*** ClientKeyExchange, RSA PreMasterSecret, TLSv1
Random Secret: { 3, 1, 236, 206, 185, 158, 75, 201, 230, 16, 170, 40, 193, 70, 188, 134, 36, 134, 14, 20, 191, 121, 246, 8, 7, 2, 137, 66, 166, 10, 185, 246, 104, 154, 27, 82, 161, 133, 11, 130, 11, 130, 71, 84, 155, 165, 239, 227 }
main, WRITE: TLSv1 Handshake, length = 763
SESSION KEYGEN:
PreMaster Secret:
0000: 03 01 EC CE B9 9E 4B C9 E6 10 AA 28 C1 46 BC 86 ......K....(.F..
0010: 24 86 0E 14 BF 79 F6 08 07 02 89 42 A6 0A B9 F6 $....y.....B....
0020: 68 9A 1B 52 A1 85 0B 82 0B 82 47 54 9B A5 EF E3 h..R......GT....
CONNECTION KEYGEN:
Client Nonce:
0000: 45 AF B2 BE 29 D4 A6 30 6D 4D B9 E8 CC 5F 9E 8D E...)..0mM..._..
0010: 3C 60 C4 AC 31 13 31 16 DE EA 2F 4C 1B 82 05 B0 <`..1.1.../L....
Server Nonce:
0000: 45 AF B2 BE CE BA A2 74 B3 48 2C C6 BD 19 46 E3 E......t.H,...F.
0010: AA EB 53 BA 98 31 C2 DE F8 03 BF AA F8 5F 86 23 ..S..1......._.#
Master Secret:
0000: CA 5C BA B3 D0 C9 26 A9 3A 06 08 8F 27 2E CE 17 .\....&.:...'...
0010: 93 98 BC DF EF 78 2A 99 DB 3E 50 3B 01 D1 84 5F .....x*..>P;..._
0020: 28 80 CE 7C 7C C1 12 A4 11 F6 33 9B 2E D9 6F BE (.........3...o.
Client MAC write Secret:
0000: 80 FF CE 99 7C 45 4C D8 60 FA 40 79 A2 A4 36 7C .....EL.`[email protected].
Server MAC write Secret:
0000: 2D F1 A0 A8 ED A1 7B DD 89 A5 01 90 43 BF F1 19 -...........C...
Client write key:
0000: E1 3F 33 54 D3 C5 3A 26 4A 41 65 DA AC 44 3B 28 .?3T..:&JAe..D;(
Server write key:
0000: C5 08 52 AE A9 0A 4F D0 AD 54 49 C6 4E 2F 9C 4E ..R...O..TI.N/.N
... no IV for cipher
JsseJCE: Using JSSE internal implementation for cipher RSA/ECB/PKCS1Padding
*** CertificateVerify
main, WRITE: TLSv1 Handshake, length = 134
main, WRITE: TLSv1 Change Cipher Spec, length = 1
main, handling exception: java.net.SocketException: Software caused connection abort: socket write error
main, SEND TLSv1 ALERT: fatal, description = unexpected_message
main, WRITE: TLSv1 Alert, length = 2
Exception sending alert: java.net.SocketException: Software caused connection abort: socket write error
main, called closeSocket()
IOException in getSession(): java.net.SocketException: Software caused connection abort: socket write error
Unable to obtain peer credentials
javax.net.ssl.SSLPeerUnverifiedException: peer not authenticated
at com.sun.net.ssl.internal.ssl.SSLSessionImpl.getPeerCertificateChain(DashoA12275)
at SSLSocketClientWithClientAuth.main(SSLSocketClientWithClientAuth.java:56)
Process exited with exit code -1.
=====================================================
I think this is the problem with ciphers. So can anybody please help me with this!!!. This is very urgent!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Thanks in advance
NileshThanks for your prompt reply I was able to make it run. Actually I am using the same keystore and truststore at both the client and the server end. I added those properties in opmn.xml as startup parameters.
I have another query I am using JDev to create a client proxy for my webservice that is deployed in OC4J. I have setup OC4J in 2 way SSL (mutual authentication)
When I invoke my client proxy with these system properties set
System.setProperty("javax.net.ssl.keyStore",keyStore);
System.setProperty("javax.net.ssl.keyStorePassword", keyStorePassword);
System.setProperty("javax.net.ssl.trustStore", trustStore);
System.setProperty("javax.net.ssl.trustStorePassword",trustStorePassword);
System.setProperty("javax.net.ssl.keyStoreType","JKS");
System.setProperty("javax.net.ssl.trustStoreType","JKS");
I get an exception in the log.xml which is
<MSG_TEXT>IOException in ServerSocketAcceptHandler$AcceptHandlerHorse:run</MSG_TEXT>
<SUPPL_DETAIL><![CDATA[javax.net.ssl.SSLProtocolException: handshake alert: no_certificate
at com.sun.net.ssl.internal.ssl.ServerHandshaker.handshakeAlert(ServerHandshaker.java:1031)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.recvAlert(SSLSocketImpl.java:1535)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(SSLSocketImpl.java:863)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(SSLSocketImpl.java:1025)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1038)
at oracle.oc4j.network.ServerSocketAcceptHandler.doSSLHandShaking(ServerSocketAcceptHandler.java:250)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:868)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
]]></SUPPL_DETAIL>
Isn't setting these properties enough for sending a client certificate. Please help!!!!
Thanks,
Nilesh. -
I'm having problems installing iTunes 10.7. It seems to be going well and then at the last part of the blue bar it just doesn't complete. All software is up to date and there is plen of room on the mini? I have tried like 4 times and am ready to throw it out the window.
I noticed some problems with the Apple Support sites here the last day or so.
Try again using > Apple - iTunes - Download iTunes Now -
Metalink SR category for problem with CRS install
HI
Can You please tell me , where I find in SR category to create request on metaling about problem with install/start crs :
I wont to create RAC env where host is ORACLE VM and clusterware is OCFS2 and wit Oracle Enterprise linux 5 , but after istal ai have problem with start crs (root.sh) and I don't know to find relevant category
[root@lin1 bin]# ./crsctl start cluster
CRS-2672: Attempting to start 'ora.gipcd' on 'lin1'
CRS-2672: Attempting to start 'ora.mdnsd' on 'lin1'
CRS-2676: Start of 'ora.mdnsd' on 'lin1' succeeded
CRS-2676: Start of 'ora.gipcd' on 'lin1' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'lin1'
CRS-2676: Start of 'ora.gpnpd' on 'lin1' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'lin1'
CRS-2676: Start of 'ora.cssdmonitor' on 'lin1' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'lin1'
CRS-2672: Attempting to start 'ora.diskmon' on 'lin1'
CRS-2676: Start of 'ora.diskmon' on 'lin1' succeeded
CRS-2674: Start of 'ora.cssd' on 'lin1' failed
CRS-679: Attempting to clean 'ora.cssd' on 'lin1'
CRS-2681: Clean of 'ora.cssd' on 'lin1' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'lin1'
CRS-2676: Start of 'ora.cssdmonitor' on 'lin1' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'lin1'
CRS-2674: Start of 'ora.cssd' on 'lin1' failed
CRS-2679: Attempting to clean 'ora.cssd' on 'lin1'
CRS-2681: Clean of 'ora.cssd' on 'lin1' succeeded
CRS-2672: Attempting to start 'ora.diskmon' on 'lin1'
CRS-2676: Start of 'ora.diskmon' on 'lin1' succeeded
CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'lin1'
CRS-2677: Stop of 'ora.cssdmonitor' on 'lin1' succeeded
CRS-4000: Command Start failed, or completed with errors.
[root@lin1 bin]# ./crsctl check cluster
CRS-4535: Cannot communicate with Cluster Ready Services
CRS-4530: Communications failure contacting Cluster Synchronization Services daemon
CRS-4534: Cannot communicate with Event Manager
[root@lin1 bin]# ./crsctl check cluster -all
lin1:
CRS-4535: Cannot communicate with Cluster Ready Services
CRS-4530: Communications failure contacting Cluster Synchronization Services daemon
CRS-4534: Cannot communicate with Event Manager
Thank You BranoHI
Can You please tell me , where I find in SR category to create request on metaling about problem with install/start crs :
I wont to create RAC env where host is ORACLE VM and clusterware is OCFS2 and wit Oracle Enterprise linux 5 , but after istal ai have problem with start crs (root.sh) and I don't know to find relevant category
[root@lin1 bin]# ./crsctl start cluster
CRS-2672: Attempting to start 'ora.gipcd' on 'lin1'
CRS-2672: Attempting to start 'ora.mdnsd' on 'lin1'
CRS-2676: Start of 'ora.mdnsd' on 'lin1' succeeded
CRS-2676: Start of 'ora.gipcd' on 'lin1' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'lin1'
CRS-2676: Start of 'ora.gpnpd' on 'lin1' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'lin1'
CRS-2676: Start of 'ora.cssdmonitor' on 'lin1' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'lin1'
CRS-2672: Attempting to start 'ora.diskmon' on 'lin1'
CRS-2676: Start of 'ora.diskmon' on 'lin1' succeeded
CRS-2674: Start of 'ora.cssd' on 'lin1' failed
CRS-679: Attempting to clean 'ora.cssd' on 'lin1'
CRS-2681: Clean of 'ora.cssd' on 'lin1' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'lin1'
CRS-2676: Start of 'ora.cssdmonitor' on 'lin1' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'lin1'
CRS-2674: Start of 'ora.cssd' on 'lin1' failed
CRS-2679: Attempting to clean 'ora.cssd' on 'lin1'
CRS-2681: Clean of 'ora.cssd' on 'lin1' succeeded
CRS-2672: Attempting to start 'ora.diskmon' on 'lin1'
CRS-2676: Start of 'ora.diskmon' on 'lin1' succeeded
CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'lin1'
CRS-2677: Stop of 'ora.cssdmonitor' on 'lin1' succeeded
CRS-4000: Command Start failed, or completed with errors.
[root@lin1 bin]# ./crsctl check cluster
CRS-4535: Cannot communicate with Cluster Ready Services
CRS-4530: Communications failure contacting Cluster Synchronization Services daemon
CRS-4534: Cannot communicate with Event Manager
[root@lin1 bin]# ./crsctl check cluster -all
lin1:
CRS-4535: Cannot communicate with Cluster Ready Services
CRS-4530: Communications failure contacting Cluster Synchronization Services daemon
CRS-4534: Cannot communicate with Event Manager
Thank You Brano -
Problems with client.jar - generated from webservices toolkit from JDK 1.1.7
We have deployed a web application using the webservices in WL 6.1 using JDK 1.3.1.
The clients were able to successfully access the servlet it generated and download
the client.jar. Unfortunately this client.jar seems to be dependent on JDK 1.2
and beyond. It seems to use java.util.Map class in the JNDI-SOAP SPI.
Is there any workaround or fix to this problem, so this jar can be used from a
JDK 1.1.7 env?.
Our objective is to use WL 6.1 EJB's from WL 4.5.1 using Webservices. Are there
any known problems with this approach (Ofcourse other than this).
Thank you.
Dora Potluri
Here is the stack trace from using the client.jar
Class not found java.lang.ClassNotFoundException: java.util.Map
[Root exception is java.lang.ClassNotFoundException: java.util.Map]javax.naming.
NamingException: Class not found java.lang.ClassNotFoundException: java.util.Map
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at javax.naming.NamingException.<init>(Compiled Code)
at weblogic.soap.http.SoapContext.throwNamingException(Compiled Code)
at weblogic.soap.http.SoapContext.lookup(Compiled Code)
at javax.naming.InitialContext.lookup(Compiled Code)
at weatherEJB.WeatherBean.getTemp(Compiled Code)
at weatherEJB.WeatherBeanEOImpl.getTemp(Compiled Code)
at weatherEJB.WeatherBeanEOImpl_WLSkel.invoke(Compiled Code)
at weblogic.rmi.extensions.BasicServerObjectAdapter.invoke(Compiled Code
at weblogic.rmi.extensions.BasicRequestHandler.handleRequest(Compiled
Co
de)
at weblogic.rmi.extensions.BasicRequestDispatcher$BasicExecuteRequest.ex
ecute(Compiled Code)
at weblogic.t3.srvr.ExecuteThread.run(Compiled Code)
Fri Sep 21 10:47:12 CDT 2001:<I> <EJB> Transaction: '1001087185816_1' rolled bac
k due to EJB exception:Yes, there is an expectation that the client jar will be run on JDK 1.3x. WLS 6.1 is certified on JDK 1.3x only. This
applies to the WebServices client as well. For details on platform support see
http://e-docs.bea.com/wls/platforms/index.html
Thanks,
Jim
Jim Rivera
Product Manager, WebLogic Server
BEA Systems, Inc.
Dora Potluri wrote:
I started testing using the client.jar generated by webservices WL 6.1 and found
that it uses reflection API interfaces that are not available til JDK 1.3. Is
there an expectation that the clients of Webservices are all going to be JDK 1.3.X.
Here is the stack trace we get.
java.lang.NoClassDefFoundError: java/lang/reflect/InvocationHandler
at weblogic.soap.http.SoapContext.lookup(SoapContext.java:76)
at javax.naming.InitialContext.lookup(InitialContext.java:280)
at weatherEJB.WeatherBean.getTemp(WeatherBean.java:106)
at weatherEJB.WeatherBeanEOImpl.getTemp(WeatherBeanEOImpl.java:47)
at weatherEJB.WeatherBeanEOImpl_WLSkel.invoke(WeatherBeanEOImpl_WLSkel.java:90)
at weblogic.rmi.extensions.BasicServerObjectAdapter.invoke(BasicServerObjectAdapter.java:261)
at weblogic.rmi.extensions.BasicRequestHandler.handleRequest(BasicRequestHandler.java:56)
at weblogic.rmi.extensions.BasicRequestDispatcher$BasicExecuteRequest.execute(BasicRequestDispatcher.java:166)
at weblogic.t3.srvr.ExecuteThread.run(Compiled Code) -
Problems with new instalation of Photoshop Elements 12
Windows 7
I have had continual problems with PE 9 with error messages to uninstall and reinstall Error 16.
So I thought buy version 12 that should do the trick BUT NO I uninstalled version 9 and installed 12 from disk on the 20th August.
Updated with Application Manager and all was well. Yesterday will not load and Error 16 as before. Tried run as administrator and was told I needed a newer version of Update Manager. Downloaded and installed version 8 still no joy and this then updated to Adobe Creative Cloud. The Application still will not open and I am getting fed up with Adobe applications, when they work their fine but I have no luck getting them to work long term.
Having bought this I am reluctant to move on and incur the cost of an alternative but I am fast running out of patience with Adobe
Any Hep Would Be AppreciatedBarbara B
Thanks for link. Worked through Windows Vista/7 settings got to Set permissions but no Adobe PCD folder. Uninstalled and reinstalled PE 12 software 5/9, PCD now there and application running OK as was the initial installation.
6/9 on start-up, Creative Cloud identified update for PE 12, Application Manager appeared and I run update, after, application running OK and Adobe PCD still there. Checked settings and permissions against link document permissions not as suggested but application working so made no changes.Will the application continue to work, that’s the next question, from previous experience with the initial installation and with PE 9, I have my doubts.
If the loss of Adobe PCD is the cause of the problem, what makes it disappear ?
Les -
Having problem with client side Authentication.
Hi,
I am haveing a problem enabling client side authentication with SSL on
weblogic 5.1.
I have set up the .properties files as explained, however it appears
my client is not sending a certificate back to the server. The same
client however works perfectly (using the same keystore file) with a
sample ClassFileSErver webserver from the jsse distribution. (the
client is a very slightly modified version of
SSLSocketClientWithClientAuth sample that comes with Jsse)
Below I've included a section of the debug dump from the interactions.
The only other difference I can see is the cipher suites offered by
the servers.
Weblogic offers type 0 or 9, and agrees on type 9
(SSL_RSA_WITH_DES_CBC_SHA), whereas ClassFileServer offer type 0 or 5
and settles on type 5 (SSL_RSA_WITH_RC4_128_SHA).
I am using the same keystore for both examples. Both servers request
an RSA client cert.... I'm out of ideas.
Any help would be greatfully received.
Cheers,
Keith
Debug dump information
=====================================
1/Weblogic server.
*** CertificateRequest
Cert Types: RSA,
Cert Authorities:
<CN=K H, OU=itsmobile, O=itsmobile, L=Dublin, ST=Dublin, C=ie>
<[email protected], CN=Demo Certificate Authority,
OU=Security, O=BEA WebLogic, L=San Francisco, ST=California, C=US>
<CN=Thawte Test CA Root, OU=TEST TEST TEST, O=Thawte Certification,
ST=FOR TESTING PURPOSES ONLY, C=ZA>
[read] MD5 and SHA1 hashes: len = 427
0000: 0D 00 01 A7 01 01 01 A3 00 67 30 65 31 0B 30 09
.........g0e1.0.
0010: 06 03 55 04 06 13 02 69 65 31 0F 30 0D 06 03 55
..U....ie1.0...U
0020: 04 08 13 06 44 75 62 6C 69 6E 31 0F 30 0D 06 03
....Dublin1.0...
0030: 55 04 07 13 06 44 75 62 6C 69 6E 31 12 30 10 06
U....Dublin1.0..
0040: 03 55 04 0A 13 09 69 74 73 6D 6F 62 69 6C 65 31
.U....itsmobile1
0050: 12 30 10 06 03 55 04 0B 13 09 69 74 73 6D 6F 62
.0...U....itsmob
0060: 69 6C 65 31 0C 30 0A 06 03 55 04 03 13 03 4B 20
ile1.0...U....K
0070: 48 00 AC 30 81 A9 31 0B 30 09 06 03 55 04 06 13
H..0..1.0...U...
0080: 02 55 53 31 13 30 11 06 03 55 04 08 13 0A 43 61
.US1.0...U....Ca
0090: 6C 69 66 6F 72 6E 69 61 31 16 30 14 06 03 55 04
lifornia1.0...U.
00A0: 07 13 0D 53 61 6E 20 46 72 61 6E 63 69 73 63 6F ...San
Francisco
00B0: 31 15 30 13 06 03 55 04 0A 13 0C 42 45 41 20 57
1.0...U....BEA W
00C0: 65 62 4C 6F 67 69 63 31 11 30 0F 06 03 55 04 0B
ebLogic1.0...U..
00D0: 13 08 53 65 63 75 72 69 74 79 31 23 30 21 06 03
..Security1#0!..
00E0: 55 04 03 13 1A 44 65 6D 6F 20 43 65 72 74 69 66 U....Demo
Certif
00F0: 69 63 61 74 65 20 41 75 74 68 6F 72 69 74 79 31 icate
Authority1
0100: 1E 30 1C 06 09 2A 86 48 86 F7 0D 01 09 01 16 0F
.0...*.H........
0110: 73 75 70 70 6F 72 74 40 62 65 61 2E 63 6F 6D 00
[email protected].
0120: 8A 30 81 87 31 0B 30 09 06 03 55 04 06 13 02 5A
.0..1.0...U....Z
0130: 41 31 22 30 20 06 03 55 04 08 13 19 46 4F 52 20 A1"0
..U....FOR
0140: 54 45 53 54 49 4E 47 20 50 55 52 50 4F 53 45 53 TESTING
PURPOSES
0150: 20 4F 4E 4C 59 31 1D 30 1B 06 03 55 04 0A 13 14
ONLY1.0...U....
0160: 54 68 61 77 74 65 20 43 65 72 74 69 66 69 63 61 Thawte
Certifica
0170: 74 69 6F 6E 31 17 30 15 06 03 55 04 0B 13 0E 54
tion1.0...U....T
0180: 45 53 54 20 54 45 53 54 20 54 45 53 54 31 1C 30 EST TEST
TEST1.0
0190: 1A 06 03 55 04 03 13 13 54 68 61 77 74 65 20 54
...U....Thawte T
01A0: 65 73 74 20 43 41 20 52 6F 6F 74 est CA Root
main, READ: SSL v3.0 Handshake, length = 4
*** ServerHelloDone
[read] MD5 and SHA1 hashes: len = 4
0000: 0E 00 00 00 ....
main, SEND SSL v3.0 ALERT: warning, description = no_certificate
main, WRITE: SSL v3.0 Alert, length = 2
And below is a sample when I used the ClassFileServer.
This time the client (same src) returned a certificate.
2/ClassFileSErver (from Sun Jsse distribution)
*** CertificateRequest
Cert Types: DSS, RSA,
Cert Authorities:
<CN=K H, OU=itsmobile, O=itsmobile, L=Dublin, ST=Dublin, C=ie>
[read] MD5 and SHA1 hashes: len = 114
0000: 0D 00 00 6E 02 02 01 00 69 00 67 30 65 31 0B 30
...n....i.g0e1.0
0010: 09 06 03 55 04 06 13 02 69 65 31 0F 30 0D 06 03
...U....ie1.0...
0020: 55 04 08 13 06 44 75 62 6C 69 6E 31 0F 30 0D 06
U....Dublin1.0..
0030: 03 55 04 07 13 06 44 75 62 6C 69 6E 31 12 30 10
.U....Dublin1.0.
0040: 06 03 55 04 0A 13 09 69 74 73 6D 6F 62 69 6C 65
..U....itsmobile
0050: 31 12 30 10 06 03 55 04 0B 13 09 69 74 73 6D 6F
1.0...U....itsmo
0060: 62 69 6C 65 31 0C 30 0A 06 03 55 04 03 13 03 4B
bile1.0...U....K
0070: 20 48 H
*** ServerHelloDone
[read] MD5 and SHA1 hashes: len = 4
0000: 0E 00 00 00 ....
matching client alias : rsakey
*** Certificate chainMatt,
Did you read this article:
https://wiki.sdn.sap.com/wiki/display/BSP/Using%20Proxies
This explains how to properly setup the HTTPURLLOC table.
In your case you should have entries that look something like this:
40 HTTP * <internal host name> <https port>
50 HTTPS * <external host name> <https port>
In addition you need to run the report to determine if the proxy configuration is setup properly. The URL should be run with the
https://<externalhostname>/sap/bc/bsp/sap/system_test/test_proxy.htm
Take care,
Stephen -
Previously having OS 10.2, I tried to install 10.4 from an installation disc over 10.2, and it failed to install. After failing to install, the computer made me restart, and now it goes to a screen giving an error about a Mac OS 10.4 and 10.5 Driver. The Computer can't find drivers for 10.4 and 10.5. I cannot boot from an Apple I-care disc, the machine tries to boot into an OS, but there is a question mark, instead of an OS Icon in the middle of the screen, and then shortly after comes the error message. The machine locks up.
I thought maybee the problem was intalling OS10.4 as an update, because there was a gap between version previously installed and the new one, but the installation guide says OS 10.2 or later is updatable.
Please Help.Hi Brandon,
If you are not able to start up from your installation DVD there might be a problem with your DVD drive.
If this is the case then there are two things you might do:
1- (and most obvious) take your Mac in for repair.
2- Fire Wire Target Disk Mode... (For this option you will need a second Mac)
- Target Disk Mode will basically turn your iMac into an external HD, by doing this you will be able to use a second Mac with a working disc drive to start up from the Tiger DVD and then install it on your iMac.
If you are going to do this it is important that no other FireWire devices are connected to either of the computers.
How to start your iMac in Target Disk Mode: Start up the computer and immediately press and hold down the T key until the FireWire icon appears.
Once you have done this connect it to the second Mac (with FireWire)
Now insert the Tiger DVD in the second Mac, when the disk appears on the Desktop open it and double click on "install"
A window with a restart button will appear... click and restart (there will be no need to hold the "c" key.
Once the computer has started up from the Tiger DVD you need to find UTILITIES or TOOLS (i can remember the exact name) on the top bar
Click on it and open Disk Utility then follow the steps of my previous post.
Make sure that you have selected the correct HD to erase and install (it will not be the first one on the list)
Good Luck.
S -
Problems with re-installing OS X
Hi,
I have recently had some problems with my iBook G4, it ran very slow and I could hear the Hard Drive constantly spinning. So I think about doing a fresh install of OSX to see if that would solve the problem, so I went to the apple support and saw that it would work if I followed the installation. Everything was working well. in the installation, I erased everything on the hard drive (I did have everything backed up...) and started the installation. (Just let me say here that I have 4 CDs that came with my iBook to install panther and it also came with a dvd to upgrade to tiger [I bought the day they relesed tiger]) on both installation disks once I satrted installing it said "there were errors installing this software please try again" I had tried many times again. and nothing has happened since.
Does anybody think they could give me a hand? it would be greatly appreciated. Thanks in advance!Try this:
1. Boot from your Panther Installer Disk. After the installer loads select Disk Utility from the Installer menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
7. Once the formatting has completed quit DU to return to the installer. Proceed with the installation of Panther. -
[SOLVED] Problem with net install cd
Trying to install Arch on an old Asus P4BGL-MX board which is proprietary, probably something HP. I have had no problems using the net install CD on 3 other Asus boards. What happens is the install process starts (booting the kernel) and then halts with the screen black and the computer hung.
The last line before black screen is: [13.34178412] ACPI: Invalid PBLK length [5]
==>> I think problem solved, but I don't understand it. The board has on board Intel graphics, but I had an ATI PCI card installed with bios set for it. Took it out and now the install goes as it should. I'm marking this post as solved, but if anyone could shed some light on this, it would be appreciated.
Last edited by Ron74 (2012-01-02 19:46:25)This says:
Colin King wrote:The warning is because of a problem with the Processor declaration in the _PR root namespace of your ACPI DSDT:
Scope (\_PR)
Processor (\_PR.CPU0, 0x00, 0x0000E410, 0x05) {}
Processor (\_PR.CPU1, 0x01, 0x00000000, 0x00) {}
The syntax of the Processor declaration is as follows:
Processor (ProcessorName, ProcessorID, PBlockAddress, PblockLength)
Section 18.5.93 of the ACPI specification states that the PBlockLength is the length of the processor register block, in bytes and is either 0 (for no P_BLK) or 6. In your case, the it's been set to 0x05 in the first Processor declaration which is definetly not compliant with the specification, hence the kernel warning message. The ACPI specification can be downloaded from http://www.acpi.info/DOWNLOADS/ACPIspec40.pdf if your are interested in the details.
As it is, this is not a kernel bug, but a warning from the kernel that your BIOS is buggy and needs fixing. I suggest informing the manufacturer so that they can fix the BIOS.
Maybe you are looking for
-
Hi, I have 2 tables as below (in similar format) having CLOB type column and these are range partitioned on the value_date column. CREATE TABLE I_TAB_A STG_RECORD_ID NUMBER NOT NULL, STG_LOAD_TIMESTAMP TIMESTAMP(6) WITH TIME ZONE NOT NULL, STG_STATUS
-
when i try to access the itunes store to buy music, it loads at the top and says connecting to itunes store..then it loads all the way and goes to a blank page. it loads and seems like it is will work, but then goes to a blank page. Why is it doing t
-
Mail Problem: No outbox, no sent mail unable to send mail
I wiped my HD and restored my account from back up. All seems to be okay EXCEPT When I open MAIL I have no OUTBOX, my SENT mail is empty and while it appears to let me create a new email and send it it does not go to outbox or sent mail, and no email
-
Re : Powershell does NOT return errorcode to CMD file thats invoking PS
Hello there, I am trying to return the exit code from PS back to CMD file that invokes the PS. Funny thing is PS does print exit code as 1 but CMD files still shows errorlevel as 0..... not sure what is causing it. The catch block in PS , I attempted
-
The following sample program got empty display , why?
import pool.ConnectionPool; import java.io.*; import javax.servlet.*; import javax.servlet.http.*; import java.sql.*; import javax.sql.*; public class Update extends HttpServlet { Statement stmt = null; ResultSet rs = null; Connection