Amazon.co.uk: EA6500 - Be careful if you want to use the VUSB feature
Date: January 18, 2013
Rating: 2
The VUSB software supplied by CISCO to connect to the router worked on two of the three PC's in my network. The software comes with little debug facility and badly written help pages, so I'm currently stuck on this.
CISCO's online help response was the router is OK, therefore they will not help any more.
Now I'm stuck digging through forums, trying to work out why their software doesn't work.
I have some articles below that hopes going to help you with the VUSB issues.
Printer sharing using the Linksys Smart Wi-Fi Router VUSB software
http://homekb.cisco.com/Cisco2/ukp.aspx?vw=1&docid=98885600b15e41d8bd0fa643a45a35fb_Printer_sharing_...
Connecting a USB printer through the Cisco VUSB software on a Windows-based computer
http://homekb.cisco.com/Cisco2/ukp.aspx?vw=1&docid=4123f0080f5a47d5ad3306aac51c0ddc_How_do_I_connect...
Connecting a USB printer through the Cisco VUSB software on a Windows-based computer
http://homekb.cisco.com/Cisco2/ukp.aspx?vw=1&docid=4123f0080f5a47d5ad3306aac51c0ddc_How_do_I_connect...
Similar Messages
-
Thursday(day 1):Had an iPad2 wifi only which I rarely used, stolen.
minutes later, pulled up findmyphone on iCloud and put a lock on iPad and then erased the iPad.
Sunday(day4) : I noted websites opened on my iphone that I had not opened.
Monday: Spooked, I went to genius bar was informed that it would have been wiped since the thief had been hooked to wifi and thus the iPad would have been erased.
Sunday(day 11), my iCal has been deleted totally from all my devices (iMac, iPhone, MacAir)
Monday (day12): I go to genius bar with Time Machine backup drive and some magic is worked to recover it. The conclusion was that the thief of my iPad wiped it out. And, " there are always ways to get into the iPad if they really want to with firewalls etc....". And I needed to change my iCloud password (which the first guy did not suggest and stupidly I did not presume I needed to do).
Monday: (day 12) Password changed. OK, done.
Wednesday (day14): I open my photo stream on the iphone and see screen shots of websites dated from as recently as day 10! These of course showed up on my iMac and my iPhone amongst my own photo shots. Talk about feeling violated and failed.
Moral of story: Can not trust that the erase feature works.
Change every single password you have as there is not assurance that a track has not been made.
And, do not have more than one user on your device: such as your spouse as their stuff could be compromized too.The pages panel is not the place where you see this information. You can customize the Links panel to show all sorts of things, including the page number, effective and actual ppi, and whether the link is OK or needs updating.
-
i need to know if palm pixie plus runs with 500 kilobytes or more please some one HELP MEEEE
Post relates to: Pre Plus p101vzw (Verizon)Sorry, your question isn't very clear... What are you asking?
- what storage capacity does the phone have?. (8gb, 7 available to user)
- will the phone run if it has only 500kb free?. (doubtful)
- is it possible to stream netflix through your Pixi to your PS3? (doubtful again). You would have to be getting a strong 3g signal and then figure out how to get netflix to work.
If I were you, I'd search for this answer over at PreCentral.net. I got zero hits for "Netflix" in the Pixi board. Many users were using "FreeTether" instead of the VZW app.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked! -
Hi,
When I insert a lightscribe DVD/CD into a lightscribe optical drive, then when I click to open the DVD, I faced this error 'How do you want to use this disc', although the DVD was full of data. When opening these
lightscribe DVD/CD via NON lightscribe optical drive, I noticed that the DVD/CD opened well without any problems at all.
Also, how can the System show to me 'How do you want to use this disc' , in particular when a DVD is non rewritable(DVD-R) and also contains data)?
Bear in mind, not all DVDs/CDs were not detected. However, only full lightscribe discs' (having data)
However, even blank lightscribe discs were detected without problems. When insert a lightscribe disc having data, then I faced that error. However, when inserting blank lightscribe discs I found that the disc were opened. Also,
non lightscribe discs were opened well.
When checking the device manager, I didn't see any issue with DVD/CD drive. If there were a problem unrecongnising, then I would have seen 'a remarkable mark' in front of it.
Note: I have faced this problem after trying formating a rewritable CD inserted onto the drive. Althouthg the format failed, all data on the disc was deleted. Anyway, after that, then inserting full-lightscribe discs are unregonised
Do you think the problem wth my optical drive. IF so, I would be saying why it wasn't happened with all other non lightscribe discs. If my lightscrib discs were corrupted, then why would they have opened well on another laptop.
I have done:
Press the Windows logo key+R to open the Run dialog box.
Type devmgmt.msc in the Run dialog box, then press Enter. If you are prompted for an administrator password or for a confirmation, type the password, or click Allow
In Device Manager, expand DVD/CD-ROM drives, right-click the CD and DVD devices, and then clickUninstall.
When you are prompted to confirm that you want to remove the device, click OK.
Restart the computer.
But the same prolbem is existing.
yes there is a virtual CloneDrive program installed on my PC, however, there is no any CD mounted into it. Even if a CD was mounted into Virtual Clondrive, there would be no problem at all, because the virtual CloneDrive is used to only
mount ISO disc images into it, and not physical discs.
Any I have do what you have said, when inserting a light-scribe disc having data, then I open it, I found this
NOTE: in the above screen shot there is a lightscribe DVD having data inserted. However, in the screen shot below, there a ightsrbe DVD not having data inserted. In the first screen shot, the disc is not reconginsed by Windows, however, in
the second is recognised.
Even when I have inserted a lightscribe disc not having data(empty), it opened well regardless of what virutal CloneDrive is enabled or disabled.
But when cliced on my problem didn't solve,
A man should convert his anger and sadness into strength to continue living in this life.Hi,
The product Name of my computer is: HP Pavilion dv6-6093ex Entertainment
Notebook PC support
The number of my computer is : LM610EA#A2N.
Could anyone please at this splendid forum take some of their precious time
out to really reply my questions and solve my problems?
FIRST OF ALL:
My HP Pavilion Laptop is about 3 years old.
My
sister's Dell Inspiron laptop is 3 years old.
My HP lapotp is well-cared, as opposed to my sister's Inspiron Dell laptop,
which is always thrown in dust without caring at all. Also, its battery is
always inserted even when it is fully charged while the laptop is plugged in to
the main power supply.
However, my laptop is either used on only battery, or on plugin. Also, it is
kept from the dust.
But, I really found that the battery of the Dell laptop
still lasts about three and half hours, and there is no problem cooling fan is
not oproperly preporly.
I only remember one thing differently done on my laptop battery which is I
charged it fully, then I stored it without using it for about four months, then
when I reused it, I found it got worse over time. I.e. first time of using it
after storing,I found it empty, then I charged it again fully, however, then it
lasted about 2 hours, then 1 and half hours, next an hour, now it is only
lasting about 20 minutes without performance. If there is high performance, then
the computer shuts down suddenly.
My problem is follows:::
First: Whenever I inserted any Containing Data OR Data
CD/DVD-R LightScribe discs, I found that HP optical driver was
unable to read them. When clicking on the optical disc drive
'duble-click', then I find that disc opens as this way(NOT: With a CD/DVD player
is grayed out)
Blank Or Used CD, DVD±R,RW lightscirbe is unable to be
read:(clicking on it let it Open like a USB FlashDrive or With a CD,DVD player:
NOTE: with CD/DVD Player is grayed out)
Used CD/DVD±R/RW Non-LightScribe disc opens normal:
Blank CD,DVD±R,RW Non-LightScribe opens normal(Opens like a USB FlashDrive or
With a CD,DVD)::
My HP CD/DVD DVD±R/RW specis are::
Optical Drives
hp CDDVDW TS-L633R
Media Type DVD Writer
Name hp
CDDVDW TS-L633R
Availability Running/Full Power
Capabilities Random
Access, Supports Writing, Supports Removable Media
Read capabilities CD-R,
CD-RW, CD-ROM, DVD-RAM, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-R DL, DVD-RW
DL, DVD+R DL
Write capabilities CD-R, CD-RW, DVD-RAM, DVD-R, DVD-RW, DVD+R,
DVD+RW, DVD-R DL, DVD+R DL
Config Manager Error Code Device is working
properly
Config Manager User Config FALSE
Drive E:
Media Loaded
FALSE
SCSI Bus 0
SCSI Logical Unit 0
SCSI Port 0
SCSI Target Id
1
Status OK
Trying to solve the problem,
I have done these steps in order::
I tried checking with dignostic ulitiy:
I have tried Advanced View , this is the file of output data
diagnostic utility
LightScribe System Software Settings:
SOFTWARE\LightScribe\MessageDir
C:\Program Files (x86)\Common
Files\LightScribe\
SOFTWARE\LightScribe\LSPrintDialog C:\Program Files
(x86)\Common
Files\LightScribe\LSPrintDialog.exe
SOFTWARE\LightScribe\LSPrintingDialog
C:\Program Files (x86)\Common
Files\LightScribe\LSPrintingDialog.exe
SOFTWARE\LightScribe\LsPrintLauncher
C:\Program Files (x86)\Common
Files\LightScribe\LSPrintLauncher.dll
SOFTWARE\LightScribe\ResourceDir
C:\Program Files (x86)\Common
Files\LightScribe\res
SOFTWARE\LightScribe\LSPrintAPI C:\Program Files
(x86)\Common
Files\LightScribe\LSPrintAPI.dll
SOFTWARE\LightScribe\Update\UpdateShellCommand
http://www.lightscribe.com/go/downloads/windows
SOFTWARE\LightScribe\Update\PreviousVersion
1.18.20.1
SOFTWARE\LightScribe\Update\CurrentVersion
1.18.27.10
SOFTWARE\LightScribe\Update\TrailingVersion
SYSTEM\CurrentControlSet\Services\LightScribeService\Type
16
SYSTEM\CurrentControlSet\Services\LightScribeService\Start
2
SYSTEM\CurrentControlSet\Services\LightScribeService\ErrorControl
0
SYSTEM\CurrentControlSet\Services\LightScribeService\
SYSTEM\CurrentControlSet\Services\LightScribeService\DisplayName
LightScribeService Direct Disc Labeling
Service
SYSTEM\CurrentControlSet\Services\LightScribeService\ObjectName
LocalSystem
SYSTEM\CurrentControlSet\Services\LightScribeService\Description
Used by the LightScribe software components to support 3rd party disc labeling
applications using the LightScribe COM Application Programming Interface
(LSCAPI). This service needs to run for LightScribe direct disc labeling to
work.
SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\
SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\
SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\TypesSupported
7
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\0
IDE\CdRomhp_CDDVDW_TS-L633R______________________0300____\4&334f7860&0&0.1.0
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\Count
2
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\NextInstance
2
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\1
SCSI\CdRom&Ven_ELBY&Prod_CLONEDRIVE&Rev_1.4\1&2afd7d61&0&000000
SOFTWARE\Microsoft\Windows
NT\CurrentVersion\Winlogon\allocatecdroms
0
SYSTEM\CurrentControlSet\Services\CDRom\autorun 1
SOFTWARE\INTEL\Intel
Application Accelerator Not detected
Drives and Media:
Drive 0 : hp CDDVDW TS-L633R 0300 219 (E, Media
Imaging Parameter : 114
I tried running the below command line to fix potential disk issue 'Chkdsk
/r /f'
I cleaned the drive, discs, and so on.
I have uninstalled the all third-party data recording software.
I have uninstalled the Cyber DVD suite, lightscribe system software which
came pre-installed with my HP pavilion Notebook.
I have recovered my system from the Factory Recovery discs.
I have tried opening all those LightScibe discs not opening on my HP optical
drive, on a Dell optical drive, and all of them were opened well, although Dell
optical drive did not have a lightscribe feature at all., nor third party disc
recording software
However, the problem is still with opening the discs LIGHT-SCRIBE
Thus, my questions are:
How to determine if the drive is corrupted and needs to be replaced with
another one.
I think there something needed to be done on the BIOS Of my HP
laptop[[[A similar problems happened on my Desktop computer's optical
drive which is as follows:::(ALL discs are opened as empty by Optical Drive of
My Desktop Computer) ---while my optical drive of my desktop was connected to
the primary slave IDE, and the HDD was connected to the
primary master IDE, the optical drive and hard disk are functioning
well. However, I remember that while burning an image with Nero essential V: 5,
something went wrong, and then the Optical Drive of My Desktop Computer
(HL-DT-ST DVD-RAM GH22NP20) became NOT recognised/Installed on
BIOS, although it was still shown on the device manager as a
recognised device. Also, it was listed on my computer, however, when entering a
disc(blank or with data) into the drive, I found it was not recognised, and it
opened empty(no files at it), although it contains data. Thus, I decided to boot
to BIOS, and clicked on 'Autodetection for IDE', then I found that only HDD was
still shown as installed on BIOS. However, the optical drive was not. Th I tried
clicking on it on BIOS and then clicking on 'enter' to try to let the device be
re-recognized. However, that made no difference. I had to take part my computer
,and then reconnected the optical drive onto the secondary slave
IDE , and let HDD connected to the same primary master IDE.
Then, I found that the problem solved and all discs became being read
normally. Aslo, optical drive became installed on BIOS]]]
What is meant with with double Layer Support.
How much does it cost?
A man should convert his anger and sadness into strength to continue living in this life. -
How to return a profile in Game Center. where you want to enter the old nikneim?
How to return a profile in Game Center. where you want to enter the old nikneim?
It's not actually round. It is slight flattened vertically.
Anyway...
I have an Action that places guides at 50% (50pc) vertically and horizontally to give me the exact center of an image file, or you place them manually with View > New Guide.
After doing that I would place the circular select from that center point using Shift and Alt (Opt) and get it more or less where I wanted it. Then change the selection into a work path.
You can use Free Transform to reshape and position that work path by selecting it in the Paths panel.
Then place your text, and if you still need to fine tune, use Free Transform again, but on the Type layer.
You could also use Free Transform to reshape the BG graphic to make it round. -
I'm not sure if this was a recent update in Mavericks, but when I used to delete items from iTunes it would ask something along the lines of:
Do you want to keep the original file or move to trash?
Now I no longer get this, instead iTunes asks:
Are you sure you want to delete the selected song from your iTunes library?
After which, if you choose the option "Delete Song", you get no option to keep the original file, it just straight up deletes if from my library and hard drive. Does anyone know if there is a way around this? For whatever reason, I want to be able to keep the original file on my Mac, without keeping it in my iTunes library.
I've tried resetting dialogue warning, and this hasn't made a difference.
Thanks!iTunes prefs > Advanced > Reset all dialog warnings. - https://discussions.apple.com/message/23987276
Resetting iTunes Store warnings - http://support.apple.com/kb/HT1734 -
Enter the Apple ID you want to use for iCloud in Control Panel > Network > Internet > iCloud.
Enter the Apple ID you want to use for store purchases (including iTunes in the Cloud and iTunes Match) in iTunes > iTunes Store.Welcome to the Apple community.
iTunes and iCloud and different accounts, you will need to delete both accounts from your device before adding the new details in their place.
For iCloud go to settings > iCloud, scroll down and hit the delete button. You can then sign back in using your correct details. For iTunes go to settings >store, tap your account ID and then sign out, you can then sign back in using your correct Apple ID. -
'You Are Not Using The Correct Type of Phone Cord' Error
Having a issue with my fax on my HP Officejet Pro 8500 wireless. Tried to send a fax, it received a send error. I ran fax test and it came back with "You are not using the correct type of phone cord". Nothing has changed since I last fax'd but I check the lines and connection, everything appears ok. Phone jack is connected to 1-line and Officejet '2-ext' is connected to the phone. I use a dedicated phone # and the Officejet is set to auto answer. I can call out and receive calls on the phone connect to the Officejet. My assumption is that since I can use the phone without issue there is nothing wrong with the phone line. Any ideas?
This question was solved.
View Solution.I was having the same problem. I'm using a the 2 wire phone cord provided with the printer and still getting this error. Turns out that it related to have a phone extension plugged into the printer. If I unplug the telephone form the extension jack on the back of the printer, then the fax test passes. I was even using a 2 wire cord on the phone extension but it seems that simply having a telephone plugged into the extension jack will cause this error.
Run the test without a telephone plugged into the printer's extension jack and you should be fine.
Worked for me! -
//remove this line if you want to edit the code by hand? um which line?
Several of my pages are locking up and I don't know why. As I work through the code, I remembered that I altered some text in a SendEmail by directly altering the page rather than using the Server Behavior. Don't understand why that would matter but whatever...
Now as I ponder if that is causing the problem, I ran across this commented line in the code:
//remove this line if you want to edit the code by hand
But are they talking about the line just after that line of //remove or do they mean the actual comment line of
//remove this line if you want to edit the code by hand?
Thanks for your helpTrigger and $tNG look suspiciously like ADDT code to me. Ask the guys in the ADDT forum (http://forums.adobe.com/community/dreamweaver/addt). There are a couple of them in there who know the code intimately. I haven't touched ADDT for ages.
-
All my Windows operating Systems are set to use the UI Culture: German
With Update-Help or Save-Help you can download PowerShell help in different (any) language by use of the –UICulture parameter.
Update-Help –UICulture en-US
Because my Windows OS is set to use the German UI Culture and the Cmdlet Get-Help depends on it, I cannot access PowerShell help in a different Language (English) with Get-Help.
There is still no translated German PowerShell help and even if I have installed the en-US verbose Help files I cannot use it (easily)!
I made a suggestion on Microsoft Connect to add the –UICulture Parameter to the Get-Help Cmdlet, to make it possible to call Help in a different language then the Windows Ui Culture.
As a workaround until then you can use the .NET Class [System.Threading.Thread]::CurrentThread.CurrentUICulture to set the UI Culture and get Help in a different language.
Function Get-HelpUICulture {
param (
[String]$HelpSearchString,
[String]$UICulture
# remember the UICulture
$OldCulture = [System.Threading.Thread]::CurrentThread.CurrentUICulture
trap
[System.Threading.Thread]::CurrentThread.CurrentUICulture = $OldCulture
# set thread to given UICulture
[System.Threading.Thread]::CurrentThread.CurrentUICulture = $UICulture
# call powershell help in given language
Get-Help $HelpSearchString -Full
# reset UICulture
[System.Threading.Thread]::CurrentThread.CurrentUICulture = $OldCulture
# Example: call PowerShell en-US help in verbose English:
Get-HelpUICulture -HelpSearchString Get-Command -UICulture ‘en-US’
If you want to access the PowerShell 3.0 Help in another language please vote for my Connect suggestion!
https://connect.microsoft.com/PowerShell/feedback/details/767899/please-add-uiculture-to-get-help
Please click “Mark as Answer” if my post answers your question and click
“Vote As Helpful” if my Post helps you.
Bitte markiere hilfreiche Beiträge von mir als “Als Hilfreich bewerten” und Beiträge die deine Frage ganz oder teilweise beantwortet haben als
“Als Antwort markieren”.
My PowerShell Blog http://www.admin-source.info
[string](0..21|%{[char][int]([int]("{0:d}" -f 0x28)+('755964655967-86965747271757624-8796158066061').substring(($_*2),2))})-replace' '
German ? Come to German PowerShell Forum!Hello JosKW
Thank you for your suggestions!
In my 3 Part Blog Series about the new 3.0 PowerShell, I offer a full blown Proxy Function for the Get-Help cmdlet to solve this better.
For now I have the first two Articles Published at my Blog, the Third Part will follow soon:
PowerShell 3.0 updateable help Update-Help, Save-Help und Get-Help Basics
http://www.admin-source.de/BlogDeu/497/powershell-3-0-updateable-help-update-help-save-help-und-get-help-grundlagen
PowerShell 3.0 updateable help Update-Help, Save-Help und Get-Help using
http://www.admin-source.de/BlogDeu/523/powershell-3-0-updateable-help-update-help-save-help-und-get-help-anwenden
The Articles are written in German. I think you as a Dutchman can read this.
Or you can use the Translate Button on my Page, to use Google Translate Service to read this in the Language of your choice. ;-))
Cheers Peter
Please click “Mark as Answer” if my post answers your question and click
“Vote As Helpful” if my Post helps you.
Bitte markiere hilfreiche Beiträge von mir als “Als Hilfreich bewerten” und Beiträge die deine Frage ganz oder teilweise beantwortet haben als
“Als Antwort markieren”.
My PowerShell Blog http://www.admin-source.info
[string](0..21|%{[char][int]([int]("{0:d}" -f 0x28)+('755964655967-86965747271757624-8796158066061').substring(($_*2),2))})-replace' '
German ? Come to German PowerShell Forum! -
How to avoid the message "Do you want to save the changes you have made?"
i have 3 forms
master block
detail1 block of master
detail2 block of detail1
when i go out of detail1 and detail2 blocks after doing some modifications it asks me "Do you want to save the changes you have made"?
i want to avoid this message as well as my changes should be posted in the database. what is the solution for this big pblm?hi
may be you are trying to modify the database item or reassigning the database item value which is not actually needed.
try to comment the reassigning database values
and give clear_form(do_commit);
most probably u will not get the message again
Regards
Rajdeep .A -
Dialog Box as "Do you want to save the changes?" in Forms.
Hi,
I have 4 datablocks in my forms that corresponds View.
In the form design, I have a canvas(multiple inserting design) with two buttons that calls the other two blocks.
Am inserting the records in the following way,
In first record,
am entering the value in one block, then a button-press event and so it opens another canvas where I enter some values then return to my main canvas. This is one row.
But while I try to insert in the second row, there arises the dialog box as "Do you want to save the changes"?
I should not get that dialog box.
Please suggest me with the solution.
Regards,
MiniThanks for the response,
Let me clearly explain.
I have 3 blocks created from view not table.
I have a canvas in the multiple display layout i.e Number of items displayed is 10.
In that canvas, I have set the two buttons. the button event is calling another canvas.
Am inserting a record in the first row in the following sequence.
Inserting the values for some fields in the main canvas, then entering the button, it opens another canvas that responds to another block, there am entering some values and closing the button event canvas, then returning to my main canvas, then entering the remaining fields with the values, thus my first row ends.
Now I want to enter the values in the second row, while I navigate from the first Row to the Second row, there arises the dialog box as to save the changes or not?
I should not get the dialog box.
Am inserting the values in the database using Insert statements in all the blocks.
Hope U understand the issue.
Suggest me with the solution.
Regards,
Mini. -
I keep getting an annoying pop up the says "User Account Control" "Do you want to allow the following program to make changes to your computer"
== This happened ==
Every time Firefox opened
== Two days after I downloaded Firefox and set as my default browser.Check that you do not run Firefox as Administrator.
Right-click the Firefox desktop shortcut and choose "Properties".
In the Compatibility tab, make sure that Privilege Level: "Run this program as Administrator" is not selected.
You also need to check the Properties of the firefox.exe program in the Firefox program directory.
If you can't make the changes then you need to start Windows Explorer as Administrator. -
I keep getting the error message "Missing PDFMaker files Do you want to run the installer in repair mode"when I try to convert a file into a pdf. I have tried uninstalling then reinstalling but I continue to get the message. I am able directly print file, but there are some errors in the pages, but some of them have font errors. Please advise.
Hey Suzanne,
Could you please let me know what Acrobat version are you using and what kind of file are you trying to convert to PDF.
If you are using an MS Office application, then PDF Maker has to be an active plug-in for the PDF conversion.
Have you tried using Print to PDF option from the File menu for the same?
Please check and then let me know.
Regards,
Anubha -
I just purchased a license for LR 5 (received via reseller, DVD in Box) and wanted to use the serial on the downloaded LR5 version through Creative Cloud.
System sais "The serial number you entered is invalid. Please try again. If problem persists contact Customer support".
I have tried several times, without success. Internet connection is working.
Thanks for your help.If you have a DVD version then you have to use the serial number that is associated with the DVD version. A Cloud subscription number has no relationship to a DVD serial number.
Maybe you are looking for
-
Properties files with Tomcat 4.0.1
I'm having trouble finding properties files using Class.getResourceAsStream Properties props = new Properties(); try { props.load(Class.class.getResourceAsStream("/Database.properties")); catch (IOException e) { //error reading from stream }The a
-
For example, I cannot drag and drop photos from Photos to the processing program. Nor can I save them directly from the processing program to Photos, it is not an option. I have to save it as a jpeg in finder, then open "other" and select Photos. Is
-
How can I switch to 32bit Windows 7
I recently purchased a U150 laptop. It came with Windows 7 64bit installed. I am discovering that there are a number of devices that I need to connect to that only have 32bit drivers available. Is there any way I can convert my laptop to 32bit Wind
-
WebDynpro Standalone - Redirect in same window
the code below I have a WebDynpro application (standalone). when loaded outside the portal in a browser window without any parameter rendering for mobile clients application should be redirected to the same url + parameter of the mobile client (in th
-
Does an ipad 3 generation can use the iOS 8.1.2 ?
i gave my ipad 3 generation (A1416 with a capacity of 16 GB) the software update (iOS 8.1.2) but my ipad isn't working how it used to. my iMessages aren't working, i can't download anything. its simply not working.