Amazon Template for Empty Production 12.1.3 Database

Dear Everyone,
Before I spend a lot of time trying the template listed in the AWS search facility:
936851542197/Oracle E-Business Suite 12.1.3 Database 32-bit - OVM
The text says: "The templates are pre-configured for Vision Demo or fresh install database". I want the fresh install database. Has anyone used these templates on AWS to create and empty e-Business suite ready for configuration?
But looking through Oracle VM Template Developers Guide For Oracle E-Business Suite (Doc ID 977681.1) it mentions only a vision database tar include.
Has anyone done this and can advise?
Regards,
Iain

Service Provider Access resulted in exception 'oracle.apps.fnd.soa.util.SOAException: SystemError: Error while sending message to server. http://ec2-107-22-78-224.compute-1.amazonaws.com:8000/webservices/SOAProvider/EbizAuth?Generate=1132&soa_ticket=Tu2z7GYoWPwq-VdgimKRFg..' when attempting to perform 'GENERATE'. Please view Service Provider logs for more details
Can you find any details about the error in the log?
I have looked at the following Note as well:
Error using the Generate WSDL Button in Oracle E-Business Suite Integrated Soa Gateway Release 12.1.1 [ID 1090946.1]Did the doc help?
Any one know what may be causing this issue? Do we have to do additional setup for SOA gateway after the standard install of the OVM? I tried to follow the steps in the note above but I do not see any entry for "<jdbc_url oa_var="s_apps_jdbc_connect_descriptor"/>" in the file data-sources.xml.
Anyone have any ideas?Have you reviewed these docs?
Oracle E-Business Suite Integrated SOA Gateway Troubleshooting Guide, Release 12 [ID 726414.1]
Oracle E-Business Suite Integrated SOA Gateway 12.1.1 Consolidated One-Off [ID 815196.1]
Thanks,
Hussein

Similar Messages

Parameter REPORT for the Report Web item in the Web template is empty or mi

Hello,
I tried to create a Web-Template (WAD). By executing the report, I get the selection screnn, but by confirming the selection I get the following message:
Web Item Report Error
Web template error in specifications for the Web item report
Parameter REPORT for the Report Web item in the Web template is empty or missing
Use the BEx Web Application Designer to add parameter REPORT to the report Web item in the Web template, and assign a report name to the parameter
Contact your system administrator. This error was recorded
What can I do to solve this error?
Thanks!
XmchX

As DP_1 Type Query_view_Data_provider, I have assinged a Query Designer Query wich works fine, if I execute it as QDR.
The entry Query_view_Data_provider makes sense for me, but what do I need to maintain for the type "Filter"?
Thanks!
XmchX

How to create a Templates for Categories and Products In BCC

Hi All,
Could you please tell me How to create a Templates for Categories and Products In BCC and how Can I get those Templates details(Categories and Products)in jsp
If possible can any one send the document or where we find in atg docs
Regards,

At product/category/sku level there is a property called template.
Find the property in ACC/BCC and provide all the values including the URL property.
In you jsp, you can use this property from product/sku like the way you retrieve any other property from sku/product.
<dsp:valueof param="product.template.URL" />
Using that property with <dsp:include> includes that page.
Peace
Shaik

Where can I download the template libraries for CS5 Production Premium

I have recently downloaded CS5 Production Premium but noticed that there are no default template libraries for things like Menu presets in Encore etc.
Can anyone tell me where I can download this file from, as when I asked Adobe telephone support they couldn't give me a specific address or file name.

I think you'll get much better answers asking in the particlar forum for the application that you're wanting templates for. To get to the forum home page where you can choose them look at the "breadcrumbs" near the top of this page.

Autocad Templates for products

Does NI provide AutoCad templates for it's products? For example, we are looking for the dimensional attributes for the ARINC 429 card to integrate into our drawing packages. Can you help???
Koz

Koz,
Sorry, but I don't believe we make that card. Are you confusing NI with Ballard?
If we do have any diagrams, they will be located here:
http://digital.ni.com/hardref.nsf/display?ReadForm&view=webmech&node=132120_US
--Paul Mandeltort
Automotive and Industrial Communications Product Marketing

Oracle VM Template for Enterprise Manager Cloud Control 12c Media Pack v1

Hello
I download Oracle VM Template for Enterprise Manager Cloud Control 12c Media Pack v1
I was checking the structure and I found this
[oracle@em12c bin]$ cd /u01
[oracle@em12c u01]$ ls
app lost+found OracleHomes oracle-template.sh scripts
[oracle@em12c u01]$ cd OracleHomes/
[oracle@em12c OracleHomes]$ ls
checkpoints db11g Middleware
[oracle@em12c OracleHomes]$ pwd
/u01/OracleHomes
[oracle@em12c OracleHomes]$ cd db11g/
[oracle@em12c db11g]$ ls
admin cfgtoollogs checkpoints diag fast_recovery_area oradata product
[oracle@em12c db11g]$ cd ..
[oracle@em12c OracleHomes]$ cd Middleware/
[oracle@em12c Middleware]$ ls
[oracle@em12c Middleware]$
The Database has all binaries but Middleware is empty
Same body knows about this issue.
Regards

Yes, you can install Oracle VM Manager, create a server pool with the one parent Oracle VM server in it, and then deploy the Oracle VM template in the pool. Once EM VM is up and running, you can register the same Oracle VM Manager with EM, to manage the pool.
In general, it is not recommended that you use the OVM server backend directly. But for bootstrapping the EM environment, you can also try the following:
Download the OVM Template on the Oracle VM server. From the OVM server terminal itself you can do "xm create" to spin a new virtual machine using the Oracle VM teamplate. Once the VM comes up, VNC into the VM and configure the EM OMS and agent.

Check for empty visa resource?

When I am developing the VI at my desk and not a the test station PC, the VISA resource name is empty.
Once the VI is moved to the test station PC, the user can select a VXI board.
How do I make sure the user has selected a VISA resource before continuing?
I can wire a Comparision to check for Empty String, and that works. But is there any method that I should use?
Solved!
Go to Solution.

Additionally, you can limit the selectable items by interface type. Right-click VISA Resource Name Control and select I/O Name Filtering.
National Instruments
Product Support Engineer

500 Internal server error in web template for specific users

Hi We have issue with Web templates for some of the users giving error "500 internal Server Error", all other users able to run the same report.
We have authorization for the user and following variable which will give target currency selection in variable screen.
SAP BI Environment
BI Java : Release: 7 - Patch level: 0000000107 - Description: BI Web Applications Java - Additional info: - Production mode: true BI JAVA SPS : 7, Patch : 0
BI ABAP : Release: 701 - Patch level: 0007 - Description: SAP Business Warehouse (PBICLNT005) - Additional info: - Production mode: true
Java Virtual Machine : Java HotSpot(TM) 64-Bit Server VM - Sun Microsystems Inc. - 1.4.2_28-b03
Operating System : Windows 2003 - amd64 - 5.2
Error Message :
ERROR: Specify a value for variable Select Target Currency
ERROR: Specify a value for variable Select Target Currency
Root Cause :
The initial exception that caused the request to fail was:
com.sap.ip.bi.bics.dataaccess.resource.impl.bi.exceptions.BicsResourceBwRuntimeException:
at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.ProviderSelectionObject.initializeState(ProviderSelectionObject.java:932)
at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.queryview.ProviderQueryView.initializeState(ProviderQueryView.java:109)
at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.ProviderSelectionObject.hasDefaultView(ProviderSelectionObject.java:1462)
at com.sap.ip.bi.bics.dataaccess.consumer.impl.selector.SelectionObject.initializeState(SelectionObject.java:516)
at com.sap.ip.bi.bics.dataaccess.consumer.impl.queryview.QueryView.initializeState(QueryView.java:198)
please let me know if any of you guys had this kind of problem.

SLD is not down its in active , I checked SLD url and Technical system also
Its in active , but when the problem is happend they done restart
but many times its happening every time restart is not preferrable ,upto that one is production system.
SLD is in active , but why the JCO'S ARE DISABLE under content Admin
where we can search the SLD user , we checked in SU01 but the user didn't exist there
If user is lock in the sense after the restart again it's working fine
I want to know the Root cause , why bcz it's simultaniously happend.
Regards,
SONY

Managed property value is not returned in item template for ArticleStartDateOWSDATE

Environment: SharePoint 2013 online
Related parts: Search Result web part (OOB), Display template for search result items
Base type: article page
I have a search result page, it has a search result web part on it, for the display template, it is using a default for list, using "single template to display items" option to point to a custom item template.
The search returns list of articles, just title and abstract, it works fine.
We need to add "Article Date" to be displayed. "Article Date" is a OOB site column under "Publishing Columns".
I found its field name is ArticleStartDate, then from search schema, I found the corresponding managed property name is "ArticleStartDateOWSDATE", the mapped crawled property is "ows_q_DATE_ArticleStartDate".
In order to display it, I added managed property mapping to the item template to map to ArticleStartDateOWSDATE.
The code is like,
<mso:ManagedPropertyMapping msdt:dt="string">'Title':'Title',','MyArticleStartDate':'ArticleStartDateOWSDATE'</mso:ManagedPropertyMapping>
var ArticleDate = $getItemValue(ctx, "MyArticleStartDate");
The value of variable (ArticleDate) is empty when try to display it.
Please let me know if you re-create this issue or have a solution to display the value.
BTW, on "Content search" web part, I can map ArticleStartDateOWSDATE to "Line 3", and display its value. So I know the managed property itself should be fine.
Thanks in advance,
John
John Architect

I think your input value is wrong,, when I did HTML decode of your Managed properties :
'Title':'Title',','MyArticleStartDate':'ArticleStartDateOWSDATE'
It gives :
'Title':'Title',','MyArticleStartDate':'ArticleStartDateOWSDATE'
i.e. wrong, if you see there is extra comma in between.
try giving :
'Title':'Title','MyArticleStartDate':'ArticleStartDateOWSDATE'
or directly 'Title':'Title','MyArticleStartDate':'ArticleStartDateOWSDATE'
get2pallav
Please click "Propose As Answer" if this post solves your problem or "Vote As Helpful" if this post has been useful to you.

Determine of Tax Code for Country/Product Category - Table handling

Dear Experts,
in SRM 7.0, CS, i am facing the following requirement regarding tax codes:
We have users from different countries using SRM. These different countries have different tax codes that are to be used for legal reasons.
My question is, how i can achieve a system behaviour, by which in the shopping cart, the correct tax codes gets selected automatically, based on the country of the user, who is creating the shopping cart.
Question 1:
Is it correct to assume, that this requirement can be achieved by maintaining the "Determine of Tax Code for Country/Product Category" - Table?
Q2:
What is the purpose of the 1st column of the above mentioned table, "Domestic/International Indicator"? Can it be left blank?
Q3:
Is it possible to fill in the values for the field "Country" BUT to leave the field "Category ID" empty???The reason for asking it, that otherwise several hundreds entries would have to be maintaind manaully...
Q4:
From where in the shopping cart or ppoma settings is the system fetching the Country code, in order to be able to use it in the table? Is there any specific attribute maintenance that has to be taken care of, so the above mentioned table can be used (e.g. delivery address, including the country information)?
Thank you very much for your help in understanding the topic.

Hi
Here are my responses to your questions:
Question 1:
Is it correct to assume, that this requirement can be achieved by maintaining the "Determine of Tax Code for Country/Product Category" - Table?
Answer - If you have a requirement where different countries have different tax codes, then you do need this confiugration. Otherwise Configuraiton in Enter Tax Code are sufficient.
Q2:
What is the purpose of the 1st column of the above mentioned table, "Domestic/International Indicator"? Can it be left blank?
Answer - Sometimes you have different codes for International and Domestic purchases for a product Category. IN those situations you can select Domestic/International field to differentiate btw tax codes. Otherwise this field can be left blank
Q3:
Is it possible to fill in the values for the field "Country" BUT to leave the field "Category ID" empty???The reason for asking it, that otherwise several hundreds entries would have to be maintaind manaully...
Answer - No, if you enter country, then Category Id field is mandatory. You may enter * in case you dont have multiple backend systems. otherwise you will ve to ve individual entries for each category and backend system.
Q4:
From where in the shopping cart or ppoma settings is the system fetching the Country code, in order to be able to use it in the table? Is there any specific attribute maintenance that has to be taken care of, so the above mentioned table can be used (e.g. delivery address, including the country information)?
Answer - It is picked up from the address of the user where is will receive goods. and Domestic/International will be decided based on Vendor address with reference to thta address.
I hope my responses clarify your doubts.
Regards
Virender Singh

Using a single file as a template for th whole site

My Application.cfm file has the code that i am using as a
template for the rest of my site. On the template, the title
section looks like this. <cfif
IsDefined('pagetitle')><cfoutput><title>#pagetitle#</title></cfoutput><else><title>Welcom e</title>
and the title variable is set on the end page. lets just say
test.cfm but when i view test.cfm the title is always Welcome. How
can i fix this. and this also goes along with my content. On the
application.cfm pge i have empty divs. on the test.cfm page i have
the same divs only with all the page-relevant information in them,
but they never show up. I know that this is how you do it in php.
but how do you do it in ColdFusion

Theres a few things you could do here... none of which I
think is the perfect solution. It all depends on your preference as
well as the needs of your application.
-- Move your page title code to another file - call it
Header.cfm or something along those lines -- and include it in
every page after you set the pagetitle variable.
-- Use Javascript to add the page title to some div at the
top of the page when it loads. (not my favorite option here)
-- Check out the CF tag cfsavecontent. You could save the
generated HTML in test.cfm into a variable and output it later. Put
your pagetitle code in OnRequestEnd.cfm, which is called AFTER
every template is executed. Set your pagetitle variable in test.cfm
and save the HTML into a variable, then in OnRequestEnd.cfm output
the pagetitle followed by your generated content.

My serial number is "not valid for subscription products", but of course it should be. how do I fix that?

my serial number is "not valid for subscription products", but of course it should be. how do I fix that?

Hello,
general informations you will find there: https://www.adobe.com/account.html and this brandnew website: Serial number and activation support.
In case you bought your program from these firms like Amazon this "serial number" obtained from them is not a serial number, only a code with which you can request a serial number from Adobe.
The following part, so I just see at least ceased to exist on my Adobe website, everything plays out in the link from above. I let it there as an info:
Here you have to go through your "Adobe Store", and look for the button "Serial Number Request". Fill in the form and, after a while you will get a "real" serial number.
Hans-Günter

Where is the VM Templates for Oracle IdM 10g R2 ???

Guys,
Oracle says to donwload VM Templates for Oracle Identity Management 10g R2 from the following site.
http://www.oracle.com/technetwork/server-storage/vm/idm-085976.html
It has also give the E-delivery instruction:
Oracle E-Delivery Instructions:
Visit http://edelivery.oracle.com/oraclevm
Complete your registration information (Name, Company Name, Email Address and Country) and click on the download agreement
Select "Oracle VM Templates" from the "Select a Product Pack" pull-down menu
Select "x86 32-bit" from the "Platform" pull-down menu
Click "Go" and then select from the list of Oracle VM Templates
Download and unzip the files and read the readme
But actually the template doesn't exist in E-delivery.
Please advise.
Thanks

yes, they removed it without updating the page at http://www.oracle.com/technetwork/server-storage/vm/idm-085976.html

Can LC Designer produce a flat PDF, not form, as a template for dynamic content?

Can LiveCycle Designer produce a flat PDF, not form, as a template for dynamic content?

Yes that means LiveCycle Designer .....the XDP is an XML file that describes the template that you want. It is turned into a PDF by the Designer as well as the LC Server I mentioned. The Designer creates interactive content (not what you asked for), the server can do the same as well as flat PDFs. I mentioned the batch mode because that is how people generally use it or they use it for real time creation of the reports but it tends to be high volume (it is a server product so it will bepriced that way). You can create an XDP that has text and "floating fields" on it. Floating Fields are special in that you can merge data with the template and once the data is put into the field it is turned into text (non-interactive). This woudl be useful for testing (requires a hands on approach) but if there is any kind of volume that you are looking for this will not be useful. The server side can be automated so that no human intervention is required.
Paul

Which is better MBPr for music production? 8gb or 16gb

Hi everyone:
I am seeking suggestions here from fellow music artists/ DJs and tech wizards to help me make the "right" decision in where to invest my money.
I don't know wether to buy the base model MBPr 15inch with 2.0Ghz Quad Core i7, 8gb ram and 256 flash drive. I am a musician and this laptop will solve two purposes
1) Usual everyday Microsoft Office kinda stuff and web surfing and
2) More importantly for Music production using Logic Pro X, Ableton 9 using KONTAKT and Omnisphere along with Reason Rewire for loops.
THEREFORE, now I am second guessing my purchase on two aspects -->
1) Is the 8GB enough to run, say a typical setup of Ableton along with 2-3 vsts softwares, would these specs on the MBPr last about 3-5 years?
2) Is the 256 GB SSD going to be an issue with file sizes? I mean like I can always transfer stuff to an external drive and keep creating space but then its almost like having a McLaren SLR and running it constantly on EMPTY and getting gas filled in it every 2 miles. Idk....
Any advise, nudge in the right direction, suggestions, recommendations would be much appreciated. . Is 8gb of ram enough? I am more on the 8gb ram side because of money issue also the place I am buying is offering 10% discount (cannot configure with the specs) I want to be happy with my purchase, but I don't want to be 2 years down the road kicking myself for not having gone with the 16GB and bigger SSD.
Which is a notable problem with the rMBPs and their lack of upgradability.

Hi whopkins85
Well I ended up going with the 16GB Retina MBP. For the simple reason that the 8GB would've seen me constantly second guess my decision. Plus I wanted to "future proof" myself as best as I could knowing that these babies cannot be 'upgraded' with additional ram at a later date due the whole soldered RAM issue. So yeah I shelled out some extra money, bought my rMBP from B&H in NYC through their webstore and saved a ton on not having to pay sales tax since I am not a resident of NY state.
Another thing I'd like to recommend to you is that if you plan on running a number of VSTs or AUs with your DAW especially of the nature of heavy sound libraries such as Spectrasonics Omnisphere or KOMPLETE then I would highly highly recommend purchasing a Lacie 2 or 3TB 7200 RPM external drive. I wish I had known this earlier but an incredibly efficient (and correct) way to run DAW with sound libraries to load your VSTs on an external drive which is either a fast SSD or at least a 7200 RPM. This way your system drive doesn't get overloaded reading and writing at the same time between multiple programs running in parallel. Once your system drive runs the DAW and the system accesses the sound libraries through and external drive, it makes for a much more efficiently managed read/write process.
I hope this helps. My mantra for technology is, when in doubt go with max specs on a machine.
Thanks for your post

Amazon Template for Empty Production 12.1.3 Database

Similar Messages

Maybe you are looking for