Amazon videos stream through Apple TV?

I own a GREAT deal of videos in Amazon prime, IF I buy an Apple TV, will I be able to stream them? I currently own a Roku, but would like to buy an Apple TV for the family room IF I can utilize all the video's I own.

only with spottily or all audio absent when you mirror?
when asking putting in very specific info such as stating the app can be confusing if the issue is general
personally my first step would be the disconnect the router for 30sec

Similar Messages

HT204291 Since downloading 8.1.3 onto my iPad, video streaming through my Apple TV freezes after a few minutes whilst audio continues as usual. Anyone experienced this and if so, is there a fix?

Since downloading 8.1.3 onto my iPad, video streaming through my Apple TV freezes after a few minutes whilst audio continues as usual. Anyone experienced this and if so, is there a fix?

8.2 is out...perhaps that will address your problem.
Barry

Why is local video streaming to Apple TV jerky?

Video streaming to Apple TV (v 3) has always been smooth. No matter what the online source -- from YouTube to Netflix -- the video is consistently good. Video streamed from Macs, though, is jerky to the point of unwatchable. Even when I stream it from a a Mac connected by ethernet with wi-fi off, the result is unwatchable. I cannot think what the problem could be. My wi-fi signal is strong (from two bridged Apple Extreme units) so when I stream wirelessly network shouldn’t be the problem, and I’m just a few feet from both ATV and AE.

Seems that if it's network related, this is going to be a hard nut to crack. I assume you can bring your Airport Extreme in to be checked out, but if you are using another brand of wireless router, you won't get much help there. I know wireless interference can play havoc with signals and one of the things I'd check out with some sniffer software is that possibility. Just sitting here in my kitchen I can see signals from 15 different wireless routers in my neighborhood. Using 2.4 GHz channel selection can make all the difference between good and poor performance. Granted those 15 access points in many cases aren't close enough to interfere, a couple are and I've seen performance on my Macbook Pro suck sometime because a close by wireless router pops onto or close to the same channel I'm on. That's a lot why I bought an Airport Extreme and use the 5 GHz side as much as possible. In the case of my Apple TV and all my Apple devices, I run on the 5GHz side. Signal strength is good and when I get the slow downs when using Airplay, the reboots of the streaming devices usually resolve the issues.

Does anyone know a work around to broadcast live (in real time) via video stream through a BC website?

Does anyone know a work around to broadcast live (in real time) via video stream through a BC website?
~Leritha

There is no work around. You would look to use a service, like Twitch, you get a embed code for the live stream, you put that on a page and away you go. All depends on the service your using.

Mplayer and multiptle simultaneous video streams through xv

While I was using nvidia drivers a while back, I could playback multiple simultaneous video streams through xv in mplayer without any problem. After recent change of video card and consequential move to open source radeon drivers, I've observed that I can play upmost one stream with gmplayer (it spits out an error about problems with opening the selected video out device - I can playback more files simultaneously using basic mplayer, although it spits the same error in console with every successive instance). Could someone enlighten me whether it's a standard behaviour of xv with radeon driver or maybe the problem lies elsewhere and it's omittable somehow?

Tried it, but to the same result
What I found out is that the user can play videos from console with framebuffer at least. Not that it helps..

HT202157 Will Apple add Amazon Prime Video Streaming to Apple TV

I am trying to find out if you can use Apple TV to stream Amazon Prime directly with out going through another device - ie Ipad Iphone - Computer - etc

Hi Cameron,
It doesn't appear that Apple TV is currently supported for Amazon Prime streaming. From the Amazon site:
http://www.amazon.com/gp/video/ontv/devices/ref=amb_link_364494962_10?pf_rd_m=AT VPDKIKX0DER&pf_rd_s=center-4&pf_rd_r=1YSV25F72AQ0FYMMJC2P&pf_rd_t=1401&pf_rd_p=1 770268202&pf_rd_i=1000663511
Cheers,
GB

Volume control for video playback through Apple TV2

I am trying to configure the volume settings used on airplay through apple TV2 and a macbook pro and Iphone4 all with most recent updates.
I am using the apple remote app on my iphone to control the apple tv.
Whats working:
Using the pandora app on my iphone through aiplay to the apple tv, I can control the volume using the plus and minus buttons on the side of the iphone for volume control. Very cool and easy.
Using the apple remote app on my iphone I can control the itunes volume of different speakers by clicking on the airplay icon and using a slider. Not as cool as using the hard +/- buttons but still works.
Whats not working:
Controling volume on appleTV2 through the iphone remote app for video playbacks like netflix, and youtube.
Why I want this: RIght now I can control most of the multimedia right from my iphone including cranking the music up:) But when I switch over to video(Netlfix, Youtube) I have to get out another remote (stereo reciever) to control the volume. It seems we are so close to being able to control everything off the iphone, the only thing missing is volume control for video playback.
Is there a setting that can be changed or a solution I havent found?
Thanks

Same problem with TV3. HDMI volume output is not adjustable, neither with the original Apple remote nor with any universal. Why ? Every simple settop-box is able to be volume adjusted. And a Mac Mini too ?!!!
I use a flatscreen TV. it has 3 HDMI inputs and one optical out for the audio going to an amp standing behind it. The sound of the TV is switched to go to the optical out.
HDMI 1 is connected to the satellite settop box with its own remote control ( channel +/-, volume +/- etc. ) it work s fine.
HDMI 2 is connected to the MacMini HDMI out with its own remote control ( channel/music +/-, volume +/- ) it works fine too.
HDMI 3 was connected to Apple TV3 with its own remote control ( channel/music +/- but no volume ). I sent the TV3 back to Apple.
What's going wrong in the mind of Apple ? Why is the HDMI volume output of the MacMini adjustable with the Apple remote, and the TV3 not ?
I want not to discuss, wether a 4th remote control is useful or not. I don't want it. I want to adjust the volume with the originl remote control of the specific unit I use, because I need it anyway. It worked since years, but not with Apple TV3.
How can we help Apple to open the volume +/- function on their own remote control ?

How do I make only the video stream through atv and keep audio via pc

Basically I am having the video streamed via atv3 to my tv via HDMI, but I want the speakers connected to my PC to be used. They're logitech speakers that have the pink-green-black 3.5mm cable setup. They can't be plugged into the TV and it appears that the HDMI stream pulls audio through the TV but I just want it to only stream the video, if that's possible.
I have searched other forums but due to ignorance I couldn't quite understand if their questions were the same, and the answers didn't seem to fit
Any help would be great, thanks.

Welcome to the forums!
What is the size limit for your email system? It may be that it is too small for any reasonable audio file. I'd suggest looking at a file-hosting and download service like YouSendIt, which would let people download the full presentation.

Netflix and amazon video streaming won't load

My netflix site wont stream video. I am getting a black screen with a rotating blue circle. The same case if I want to stream amazon videos. If I log out and use another user on the same computer (iMac) it works fine. I did reinstall silverlight, but since the second user account works I ruled that out in anycase. This problem happens on all browsers. I have stripped safari of add -ons with no luck. I have also disabled start up apps, no luck. Any suggestions?
Thanks

What is different about the 'second user' account, from the admin or first user?
Is it a matter of browser setting, upgrade to browser, a default
still in effect, in a seldom used second user account?
In these details alone, probably is an answer.
Or a permissions issue, privileges issue, etc.
How current are shared plugins for internet?
Are the videos using Flash, or HTML5, other?
Is there a system log in Profiler, or Console
that would show a set of messages about it?
There has to be a trail of breadcrumbs....
maybe one that regular people can follow.
Sometimes cold trails are best for sniffy dogs.
Good luck & happy computing!

Iphone 4s slow video stream to apple tv

Apple will you please sort out a software fix for this problem!
It takes for ever to stream a short video clip recorded on the iphone 4s to the Apple TV? A lot of the time it doesn't seem to want to mirror it on to the Apple TV Why?
Pictures work just fine.
Don't seem to get the problem, when I record video on my Fuji camera, then copy to my computer, then add that file to my ipad 2 through iTunes. When I then mirror this onto Apple TV it plays just fine.
Had a new router today as well, just in case this was the problem. It's made no difference:-(

After fighting with At&t Uverse, we got a new modem and it appears that that was the problem. I've successfully mirrored three different apps to the apple tv and so far so good after 25 min. Let's see what happens in the next few days.

Live video streaming through red5

hi all,
I'm working on a video Audio chat Application developed in flex, Air and red5 as media server.
Basically the chatting will be between one-to-one user based, where one client(webUser) is going to signin from the website and selects a user from the list of online users.
The other person is online from his desktop tool developed in air application.
The communication between these two users is through webService. Now as soon as the Air user gets request for chat from webuser he accepts it, a chat window opens and connects to red5.
We are streaming the live webcam video,Audio and messages through red5. we are publishing Air users video to webuser and playing webusers video to airuser. we are using the same code in both the applications for connecting and streaming but the video is playing in the webuser end for few minutes and in the air application the webuser video just appears for few seconds and stops saying NetStream.play.unpublishNotify. That is the actual problem.
I also test with the same thing with two web application and here publishing is working at both end and both user can able to see the others video.
So main problem is between Air and web application, the video stops in few seconds. Please let us know if there is any security restriion in AIR or any thing else which I m missing.
Any help is appreaciated.

Hi,
I need show three live image from three ip cameras in one window... how can I do this?? can you help me??
thanks

Variable bitrates for Live Video Stream through DSS

I was wondering if there was a way I could do a live broadcast using QuickTime Broadcaster and Darwin Streaming Server (DSS) so that users viewing the live feed see it at different bitrates according to their internet connection.
I've been looking through the administrator's guide, but it doesn't say anything about doing reference movies with live broadcasts so I wanted to ask here.
Dell Server, iBook G4 with QT Broadcaster Other OS Debian GNU/Linux 3.1 running DSS 5.5.1 using latest QuickTime Broadcaster

Would I have significant performance problems with QT Broadcaster encoding the same video at three different rates?
Not really since you'd be using three separate Macs with three separate copies of QT Broadcaster. Of course you'll need sufficient bandwidth in your network/Internet connection to handle the number of feeds you expect. I haven't tried to plug a single FW camera into three separate Macs at once, though in theory it should work (I did it with two once just as an experiment and it seemed to work OK).

Video stream through PIX

I wanted to know if I can take an video source from a public IP address through my PIX, using the static command, to a multi-cast address like 224.2.0.1. Is this possible or not? If not what would be another way to do it?

Yes, using a static command you can take video source from a public ip address through pix

Streaming through Apple tv

Hi folks
Just wondering is it possible for apple tv to stream live feeds and movies that are not on itunes directly? Or should I just buy the cables to connect to my hdtv as an alternate set up to itunes for this purpose?
Thanks

No it can only play media from iTunes, or access certain predefined areas like YouTube, MobileMe, Flickr and iTunes radio stations.
It does not have a browser or capability to access specific sites you specify.
While it could do these things in theory, it doesn't, and connecting a computer to TV would give better all round functionality if you need this kind of stuff though the interface won't be as elegant.

Is there a way to lock the airplay screen so it is still streaming through apple tv but I can continue working on my macbook?

I can get it to stream without the tv mirroning exactly what I am working on at the moment

You can't change the location of the media folder from a script, neither can you change which library file is opened. I assume your script simply copies the current master library into the normal location for the file on each client machine. Do you not get a file locked error? What about the other library files and the Album Artwork cache?
Your scheme may work best if you use a common drive letter for your media folder and have it so the media folder is not inside the master library folder. E.g.
Master library folder at X:\iTunes
Master media folder at X:\iTunes Media
Where all the computers see drive X: as the same object, be it the whole of that drive or a shared folder on it.
If you have the typical arrangement (iTunes Media inside iTunes) then when you copy the library from X:\iTunes into C:\....\iTunes and start iTunes it will attempt to "correct" for the fact that you've apparently moved the library and reset the library folder to C:\....\iTunes\iTunes Media. It should still be able to find the media at the correct location, but if you accidentally load anything up from a client machine it will end up in a local folder.
If you are not already familiar with it iTunes Folder Watch will be a useful tool for catching up with any additions made on the client computers. You should probably also ensure that each of the clients has the "Keep iTunes Media folder organized" option disabled.
tt2

Amazon videos stream through Apple TV?

Similar Messages

Maybe you are looking for