Ambient light senor/auto brighness on iPad 3 not working
I updated my iPad 3 to iOS version 6.1.3 yesterday. At first I noticed that the brightness control would move on its own. Today, I noticed that the auto brightness has no affect on the screen lighting.
Has anyone seen this before, or have any suggestions?
I did a couple of resets and still not working (hold power off and home button for 10 seconds) until unit shuts down.
Thanks bunches for any suggestions.
hi
since you have already tried the basic troubleshooting, no other way rather than taking to an Apple store
Similar Messages
-
I have Airport Extreme as the base unit and an Express unit in a room separated by a brick wall to improve signal. Express shows a green light indicating signal but my iPad does not perform well. How can I improve other than hardwire ethernet connection?
Other suggestions, and more info about the nature of the problem, may be in this Apple tech note.
http://support.apple.com/kb/HT1365
For example, you might find that the brick wall is not the only problem. There may be other devices pumping out enough wireless interference to be making things even worse.
I agree with Bob Timmons that Ethernet is best and most reliable. And that powerline (which I use) is easier and potentially faster than wireless...but only if your power lines do not have electrical devices plugged in which produce electrical noise on the line. Powerline will be slower than Gigabit Ethernet.
Ethernet cable is the only way to ensure that the signal goes directly there in a shielded way for a clear fast signal. Wireless and powerline are much slower because of all the other things the signal has to fight past to get to the other device. -
My iPad would not complete the back up to iCloud. The suggestion re: resetting the iPad did not work. Are there any other ideas?
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
The device mini iPad is not working after the update of the system
Hello,
I need help that my mini iPad is not working at all. I started an updating process from the system but then it shuts down and it never opens again! even though the charge is full.
please replay me .
Best,
MawaddahTry:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
IPad activation not working please help Urgent
iPad activation not working, I got this message "this ipad is currently linked to an Apple ID, sign in with the Apple ID that was used to set up this iPad. I enter my icloud account and user name to the computer and its ok, but not working for ipad
See if these Apple Support documents help you ...
https://www.apple.com/support/appleid/
Find My iPhone Activation Lock: Removing a Device from a Previous Owner's Account
http://support.apple.com/kb/ts4515
If not those, then go to Apple Support for some official Apple Support help ...
Apple Support
http://www.apple.com/support/
Apple Retail Store - Genius Bar
http://www.apple.com/retail/geniusbar/ -
I have just recently installed ios6 to my iPad 3 an iPhone 4 my iPhone works fine but my iPad is not working at all I can not get a response from it, it seemed to download an then install but did not reset and turn on and will not turn on HELP!! Withdrawal or what!! Lol
Hi there,
Firstly, try a hard reset. Hold the sleep/wake and home buttons together until the Apple logo appears.
If this doesn't work, try restoring your device. Put it in recovery mode if iTunes doesn't recognise it, and restore it from there. I have linked to instructions below.
Recovery Mode and Restore - Apple
Let me know if this helps,
Nathan -
I clicked on "Erase all Content and Settings and now my ipad is not working, only the apple logo appears. how to i reset it back?
Some please show me how to reset it.Here is some information from Apple:
http://support.apple.com/kb/TS3274
http://support.apple.com/kb/HT4057 -
I was trying to do an update on my Ipad2 and it looked like it was getting ready to load, but then I received an error message. Now my ipad is not working at all. The only thing that appears on the screen is the apple logo and a loading bar. I tried to turn it off, but it just wont do anything. Help!
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
PAD Mini Locked after iOS upgrade, tried reset on iPAD did not work, plugged in and device not appearing in iTUNEs for reset/restore. Just get an Apple Logo then a flashing blue screen as if it is caught booting up. This has happened twice before and iTunes restore fixed it. But this time device not appearing in iTunes.
Running iTunes for PC. But as stated restore has worked before! Any help greatly appreciated!!Place the device in DFU mode and let iTunes restore the device to factory condition.
-
Auto-Reaction E-mail is not working:
HI Basis gurus,
I am setting up a fresh configuration with Solution Manager.
Central system is solution manager 4.0.
Auto-Reaction E-mail is not working:
I have set Z_ccms_Onalert_email with the following parameter
Parameter name Parameter value
SENDER userid from client 000
RECIPIENT my company e-mail Id.
RECIPIENT-TYPEID U
for the below MTE:
Properties of DEV\r3dev_DEV_00\...\Background\Aborted
MTE class R3BPServerSpecAbortedJobs
when I check in CCMS Selfmonitoring it shows:
Node name (MTE) DEV\MoniInfra_r3dev_DEV_00\...\DataSupplier\Log
System DEV
Context MoniInfra_r3dev_DEV_00
Object name DataSupplier
Short name Log
Status ACTIVE
Alert text Document <CCMS alerts DEV 20050808 041658> could not be sent
Line-Id in Message Container 0000000243 0001149437 1123489018
VAR 1 CCMS alerts DEV 20050808 041658
VAR 2 CCMS alerts DEV 20050808 041658
VAR 3 CCMS alerts DEV 20050808 041658
VAR 4 CCMS alerts DEV 20050808 041658
I also tried creating seperate MTE and added
Properties of DEV\r3dev_DEV_00\...\R3Abap\Shortdump
MTE class R3AbapShortdumps
With Auto-Reaction Methor has ccms_Onalert_email with the above parameter.
But the e-mails are not triggered.
I checked ccms_selfmonitoring and found below error message:
Node name (MTE) DEV\MoniInfra_r3dev_DEV_00\...\Tooldispatching (short running tasks)\Messages
Context MoniInfra_r3dev_DEV_00 Object name Tooldispatching (short running tasks) Alert text Unable to set runtime status for data collection method (RC = 253), MTE: DEV\r3dev_DEV_00\...\R3Abap\Shortdumps
Line-Id in Message Container 0000000222 0001068279 1122993022
Also send_internet_mail Job is running every 10mins.
Please provide solutions for this.
Thanks in advance
PradeepHi Pradeep,
Can you send e-mail at all from the ssm 4.0 ? Are there any mail hanging in scott ? Are the MTE's reporting at all? May be a stupid one but you say
I have set Z_ccms_Onalert_email with the following parameter
and then
With Auto-Reaction Methor has ccms_Onalert_email with the above parameter.
But the e-mails are not triggered.
Is the no Z_ a typo in the post or is this a typo in you're system ??
Lando -
The sound in my IPad is not working after I downloaded the new iOS 7. I tried to reset the IPad to no avail. Could anyone be so kind to help me?
I"m going to make the presumption that you've checked the volume and that you don't have it muted. One thing some have suggested is to go into the settings and reset all settings.
It is kind of a drag because you wil have to retweak everything but it's helped for some. -
I tried to update my ipad with IOS7, it crashed!!!!!! now my ipad will not work, have tried to restore the ipad, will not restore, help please??
I tried to update my ipad with IOS7, it crashed!!!!!! now my ipad will not work, have tried to restore the ipad, will not restore, help please??
-
Passwords, auto-fill in safari does not work it is enabled in settings, what can do
passwords, auto-fill in safari does not work it is enabled in settings, what can do
Private Browsing Off.
Private Browsing On. -
Ipad photobooth not working, shows curtain closing but camera seems to be off
ipad photobooth not working, shows curtain closing but camera seems to be off
Have you tried closing the Camera app completely ? From the home screen (i.e. not with the Camera app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
iPad sound not working. Need help
Is it working on any apps e.g. Music and Videos apps but not third-party apps or notification sounds ? If you do get sound in Music and Videos then have you got notifications muted ? Only notifications (including games) get muted, so the Music and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085
Maybe you are looking for
-
As my main computer I use an iMac which is not yet updated to Mavericks and I'd rather not update for now. I recently bought a MBP retina which has Mavericks on it. Whilst I was using the shared network to copy over some files to my new macbook I ope
-
Sharepoint Foundation 2013 Remote Desktop Integration.
Hi, I am trying to integrate some form of RDP service into the Sharepoint Foundation Site I'm working on. I would like for users of the site to be able to use a web-based RDP to connect to PC's on the network. Can this be done? Thanks in advance.
-
I am having a problem with sending text messages to ONE contact
We were texting just fine until Sunday night. We text several times a day. As of Monday a text will not go through to my daughters phone. I have done a system reset on my phone, I have cleared the system cache, I tried a different message app, cleare
-
AUC and settlement rule mismatch.
Hi, We have created many AUCs while uploading initial data at the time of go-live by posting JVs on WBSE and then performing the settlement. Now due to some currency issues we have reversed all settlements, and then Asset accounting person has resett
-
How to Deploy forms 6i on Oracle 9iAS
Hello, Anybody knows hot to deploy forms 6i on Oracle 9iAS (WEB). Oracle 9i Application contains several options 1. Oracle9iAS installation. 1.1 J2EE and Web Cache. 1.2 Portal and Wireless. 1.3 Business Intelligence and Forms. 2. Oracle9iAS Infrastru