Ambiguous-import-flow-from-multiple-connectors when running AD MA Full Sync

When I run a Full Sync on the AD MA, I get a bunch of "ambiguous-import-flow-from-multiple-connectors" errors when running AD MA. How can I find out which attribute is causing this?
If I open one of the errors and run a "generate preview" I can see there is a join ("match") based on (data asource attribute) samaccountname & (metaverse attribute) accountName but I don't seem to be able to figure out
what attribute is causing this and / or needs precedence.
Anyone any ideas?
JD

Hello,
this error occurs because you have more than one CS object linked to one MV object.
In this case FIM can not resolv the precedence of Attribute flows correctly, because they have all the same precedence. Or regarding to your question, all Import attibutes flows are causing the Problem.
You have to configure Manual precedence with advanced Attribute flows in this case.
or
If multiple CS objects to one MV object is not was you Need, get rid of the second (or more) connector from that data source.
See more here:
https://msdn.microsoft.com/en-us/library/windows/desktop/ms696034(v=vs.100).aspx
http://www.wapshere.com/missmiis/overcoming-multiple-personality-disorder-in-the-source-data
-Peter
Peter Stapf - ExpertCircle GmbH - My blog:
JustIDM.wordpress.com

Similar Messages

Error in importing data from multiple ASCii files, Concatenate

I am trying to use the "Importing Data From Multiple ASCII FIles.VBS" and the "Concatenate Groups.VBS" scripts downloaded from here, http://zone.ni.com/devzone/cda/epd/p/id/3870. When I run the importing data script and test it by highlighting the example data that comes with the download I get an error. "Error in <Importing Data From Multiple ASCII Files.VBS> (Line:60, Column: 11): Variabls is undefined: 'AscIIAssocSet' "
The offending line of code is " Call AsciiAssocSet(FilePaths(i), StpFilePath) ' assign STP file "
Screenshots of the error are attached.
Can anyone tell me what this error is? Am I just doing something wrong? Getting quite frustrated.
Thanks in advance.
Attachments:
concactenate1.png ‏261 KB
concactenate2.png ‏243 KB

Please have a look at the DIAdem Example to concanate channels. Its delivered with DIAdem.
Examples > Creating Scripts > Scripts > Appending Channels to Each Other
Please use a dataplugin (File -> Text DataPlugin Wizard...) or the csv plugin to load your data.
Greetings
Andreas
P.S.: The one you have downloaded needs the old Ascii Wizard that is not activated by default in newer DIAdem versions.
If you want to use it anyway:
Settings -> Options -> Extensions -> GPI Extensions ...
Add gfsasci.dll

Suddenly my event library in iMovie 11 is empty. I have tried deleting the plist, importing clips from multiple locations (to see if they show up in the library), re-installing iMovie, and re-installing Mountain Lion. Help??

Suddenly my event library in iMovie 11 is empty. I have tried deleting the plist, importing clips from multiple locations (to see if they show up in the library), re-installing iMovie, and re-installing Mountain Lion.
I was working on a project, when all of a sudden the event library went blank. There are no devices showing in the left column, only "last import" and "aperture videos". There are no video clips in the editing window. I have "Show: All Clips" selected. I've tried "group events by disk".
When I have a Project open, it plays just fine. There are no yellow triangles saying "source clip is missing". Yet, again...nothing is in the event library large editing window. So, it seems the data is still there, but invisible. This is true with all the projects, and all the external devices I've experimented by plugging in to see if their video clips show up in the event library.
I have tried to import new movies, and iMovie responds as normal...looking like it's importing, then "generating thumbnails", then it makes the "ding" signalling that the import is complete...but nothing shows in the event library. I've tried importing movies from the harddrive, from quicktime, and from an external drive.
I have searched the forums, and found many users with a similar, but not the same, problem. For them, it seems the "go to users-library-preferences and delete iMovie plist" has solved their problem. This didn't work for me.
I uninstalled/reinstalled iMovie, I even have re-installed Mountain Lion (from a last-ditch effort suggestion from Apple technician).
HERE'S AN INTERESTING DETAIL: After almost 5 hours on the phone with Apple, I decided to cut my losses and take my project to another Mac I have. I'm working on a project, for work, that is critical that it's completed by tonight (whoops), and all my video is on an external drive. So, I plug in the external drive to Mac #2, open iMovie, and everything is looking fine. I continue importing some files I was converting, through Wondershare, and suddenly (whether or not this has to do with the importing, I'm not sure), the SAME THING happened to Mac #2!!!! I can't believe this.
Does anyone have any suggestions? Have you ever heard of this happening? Could it have to do with the files I'm importing???
I apologize if my language is confusing. Obviously, I'm not an Apple genius-person! I hope I've provided all the information you need.
Mac #1 is a 27" desktop, mid-2012, software up-to-date. Mac #2 is a 24" desktop, about 4 years old, OSX 10.7.5

I'm adding more information:
in Finder, my iMovie folders are all visible and accessible. When I click on a clip from iMovie Events folder, Quicktime opens and plays the clip. ALL my video is not missing - it just isn't showing up in the Event Library!
This happened all of a sudden, while I was working on iMovie project (on both computers).
All my Projects are intact, and play when I open them.

How to import photos from multiple iphoto libraries to iPad

How do I import photos from multiple iPhoto libraries from my iMac to the new iPad? I have 4 different iPhoto Libraries on my iMac.
I can import photos from iPhoto library 1, to the iPad, but when I import photos from iPhoto Library 2, created on my iMac to the iPad,
it deletes the original photos that I imported from the first iPhoto Library and replaces them with the import from library 2.
I only want to import selected photos from each library to my iPad. Can someone plese help me?

As Ralph has suggested, if you want to sync photos from your computer, you must include all photos that you want to sync - with each and every sync. You cannot import photos from another Main photo folder on the computer. You must create an all-in-one photo library in iPhoto and sync from that folder. You can select one level of sub folders from within that main folder, but all of those folders must be included in the main folder - in your case it is in iPhoto. That is just how the sync process works with Photos.
I don't know how using third party apps affects the photos that you have already synced from iPhoto, but take a look at these apps in this Google search. Maybe Wifi transfer is the way to go for you.
http://www.google.com/search?q=wifi%20photo%20transfer%20computer%20to%20iPad

Importing,photos,from,a,scanner.,,when,I,import,from,my,epson,exp-860,scanner,and,go,to,de velop,in,lightproof,,only,photos,imported,as,JPEG,have,a,active,,WEB,adjustment.,,tiff,and ,JPEG,have,a,grayed,out,WEB,Adjustment. Is this normal?

Importing,photos,from,a,scanner.,,when,I,import,from,my,epson,exp-860,scanner,and,go,to,de velop,in,lightproof,,only,photos,imported,as,JPEG,have,a,active,,WEB,adjustment.,,tiff,and ,JPEG,have,a,grayed,out,WEB,Adjustment. Is this normal?

William Lloyd wrote:
Yeah you shouldn't use ~ in general. That is a shortcut for "Your home directory."
This is not strictly true. ~ is a "meta-character" in Unix shells -- it is an instruction to the shell to substitute the path to a home directory. It only has meaning in a Unix shell command, and only if ~ is the first character in a file path name. Outside of a Unix shell ~ has no special significance (although other programs might adopt a similar convention).
I don't see any reason why Aperture would be doing tilde expansion, and if it is, it is doing it wrong. "March~May Asia Trip" is a perfectly legitimate name in both Mac OS and in Unix. There is nothing taboo about using ~ in a file name. This behavior (which I can confirm) is almost certainly an Aperture bug.

I am trying to download from iTunes and when I clicked on the Sync button, it indicates that it is waiting to start and then says the sync failed. what is the problem

Trying to download from iTunes and when I clicked on the Sync button, it indicates that it is waiting to sync. Then it comes back saying sync failed. What is the problem ?

Few questions..
are you using windows or mac?
what version of itunes are you using?
have you EVER been able to successfully sync with itunes?
what iOS version are you running on your phone?
This is a great article for syncing with itunes. Good Luck
http://support.apple.com/kb/HT1386?viewlocale=en_US

HT1386 purchased new songs from itunes and when I clicked on the Sync button those new songs are not added to my ipod nano. Have any idea how to resolve this problem?

purchased new songs from itunes and when I clicked on the Sync button those new songs are not added to my ipod nano. Have any idea how to resolve this problem?

Do you have the right boxes checked to sync the music to your iPod?
iTunes: Syncing media content to iOS devices and iPod
Do they play in iTunes on the computer?
Have you successfully synced music form this iTunes library/computer before?

Stopping Time Machine from backing up when running FCP

Is there any way of stopping Time Machine from making backups when I have Final Cut Pro running?
Each time TM is about to prepare backup, FCP goes down in performance like an ant in maple syrup.
Quite annoying. And sure, I can live with no backups made during work. (I hit Command-S every minute instead... ;-))

You may have something else going on, that doesn't seem to be a problem at other times.
First, see if the size of the backups makes sense, given the changes you've made. If in doubt, Click here to download the +Time Machine Buddy+ widget. It shows the messages from your logs for one TM backup run at a time, in a small window. That will show the duration of each backup at the top, and the total size in the "Copied" messages.
If that seems large, see #D4 in the Time Machine - Troubleshooting *User Tip* at the top of this forum.
If the size seems reasonable, but the amount of time is not, see #D2 in the same place; any or all of the suggestions there may speed them up.

Getting SQL*Net more data from client waits when running a query through web based interface

Hi, you all,
We are having this weird behavior when running query through web based interface, we get a lot of "SQL*Net more data from client" waits, the OEM indicates that the current wait event is SQL*Net more data from client
It's just a very simple query wich invokes a db link.
When I execute the same query on any PL/SQL tool like toad or sql developer it works fine, but that query inside an application executed through a web based interface, it hangs for ever.
Where can I start looking for the problem.
We are working on a 3 Node RAC 11gr2, both databases are on the same RAC.
Thanks.

Hi ,
we managed to reproduce the case in test environment, below are the steps:
1)have 2 databases on different machines, will call the first one local, the other one remote.
2)in the local database create:
a - DBLink to remote database.
b - read data from remote database(we simply used select count(*) from dummy_table )
c - insert data into a table on the local database
d - terminate the connection between the 2 databases (disconnect either machine from the network)
e - commit on local database.
what we noticed was the following:
1)when the local database is disconnected from the network(the machine is not connected to any network at the moment): almost immediately throws an error, and issuing the following:
select * from dba_2pc_pending;we found some data .
2) when the remote database was disconnected(the local database is still connected to the network):
after 7-8 seconds an error is thrown, and issuing the following:
select * from dba_2pc_pending;did not return any data.
since this is pretty similar to our case ,we concluded that it's a network issue.
is this the correct behavior ?
as a temporary solution till the network issue is fixed ,we did the following:
1) changed the call of the remote procedure to calling a local procedure that calls the remote procedure.
2) added pragma autonomous_transaction to the local procedure.
3) at the end of the local procedure rollback the autonomous transaction.
it seems that since the global transaction does not use the DBLink database does not issue a 2PC commit.
this works in my cases since the DBLink is only issed to read data.

Importing data from multiple instances of form into spreadsheet

I am trying to set up a time-tracking system using an interactive PDF form. I have designed the form, and it works great. All users will enter their time into the form and email me the form. So I will have multiple XML file to import into Excel, where I can compile and analyze the data.
Is there a way to automate the importing of these multiple XML files into Excel? From what I've figured out so far, it seems that I will have to manually import each XML file into Excel, and this seems too labor-intensive. I'm sure there's a better way.
Any hints?

Give Acrobat a try. Put all your XML data into a single location. In Acrobat, choose File | Form Data | Create Spreadsheet from Data Files. Once the file has been compiled, use the "View" option to see the data in Excel.
Carl Young
www.pdftrain.com

Trying to import favorites from Explorer. When i go to the file menu in firefox, import is grayed out and I can't import the favorites

I am trying to import my Explorer favorites. When I go to the "file" menu, "import" is grayed out and I cannot use it to get to the next step.

Make sure that you do not run Firefox in permanent Private Browsing mode.
*https://support.mozilla.com/kb/Private+Browsing
You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
*Deselect: [ ] "Always use private browsing mode"

Accessing files from jar file when running application?

I have an application that when run should read an xml file (test.xml) from a jar file located in a resource folder. I do this:
    File f = null;
    URL url = this.getClass().getClassLoader().getResource("test.xml");
    try {
      f = new File(url.getPath());
//      f = new File(url.toURI());
    } catch (Exception e) {
      throw new GeneratorException("Preload input not found!");
    }The file is found in the jar but when I want to use it I get problems:
when doing:
f = new File(url.getPath());
this file is not found and when doing:
f = new File(url.toURI());
I get and:
URI is not hierarchical exception
Is there now way to convert the xml file in the jar file to a File object?

fedevaps wrote:
But is there now otherway to create a File from the URL?Only if the URL refers to a file in the first place. Which it doesn't when the URL refers to an entry in a ZIP file because an entry in a ZIP file is not a file.
java.io.File refers to physical files in the sense that the operating system uses it. It can't refer to Files on remote machines, it can't refer to "files" stored in .ZIP files and it can't refer to some random String that you construct.
Usually when you think you need a File object in Java, you don't actually need it. There are only a handful of operations that you can do with a File object that can't be done with a URL as well (deleting, renaming are two that come to my mind). Reading from it and writing to it works with a File as well as with an URL.

Removing keywords from multiple images when the keyword isn't in the list?

So, I know that the method for removing a keyword from multiple images is to select the images, type the keyword in the inspector and press Shift-Return.
However, that doesn't seem to work if the keyword I want to remove is not in the keyword database (i.e. it's not in the keyword HUD).
For example, I deleted the iPhoto keyword group from the keyword HUD because I decided I didn't like that. I've got a bunch of photos that still have keywords like "Beach (iPhoto)". Typing "Beach" Shift-Return does nothing. Typing "Beach (iPhoto)" Shift-Return does nothing.
Adding an iPhoto group back to the HUD and a child keyword of Beach and then Typing "Beach" Shift-Return works, but I can't believe that's how it's supposed to work.
Is that the only way to do this? I've got a lot of those old iPhoto keywords to remove and that's going to be a major pain... there must be a better way.
PowerMac Dual G5 2.0 Mac OS X (10.4.6)

I don't know if this will help you or not but it contains the roots of what you would need to script the removal of unwanted and unlisted keywords.
-- script begins
tell application "Aperture"
  -- set the target to the "Smart beetles" album at the top level of the library.
  tell album "Smart beetles" of folder ""
    -- get a list of the images in the album.
    set x to every image version
    -- move through the images one by one, deleting and creating the appropriate keywords
    repeat with i from 1 to x's length
      tell x's item i
        -- Note. if the keyword is top level, then the parents value is "".
        delete (every keyword whose name is "Australia" and parents is "Location")
        make new keyword with properties {name:"Sydney", parents:"Location"}
      end tell
    end repeat
  end tell
end tell
-- script ends

Error return from JOB_SUBMIT / SUBMIT when running with another username

I am trying to run the program RSBDCSUB after setting up a BDC session.
Due to our authorisations in the production environment I have to run this program under a generic user (l_ernam) that has the authorisations as most users do not.
Here is the code I am using:
CALL FUNCTION 'JOB_OPEN'
EXPORTING
jobname = l_jobname
IMPORTING
JOBCOUNT = l_jobcount
CHANGING
RET = l_ret
EXCEPTIONS
CANT_CREATE_JOB = 1
INVALID_JOB_DATA = 2
JOBNAME_MISSING = 3
OTHERS = 4
Submit RSBDCSUB And Return
User l_Ernam
Via Job l_Jobname Number l_Jobcount
with mappe = l_mappe .
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
jobcount = l_jobcount
jobname = l_jobname
STRTIMMED = 'X'
EXCEPTIONS
CANT_START_IMMEDIATE = 1
INVALID_STARTDATE = 2
JOBNAME_MISSING = 3
JOB_CLOSE_FAILED = 4
JOB_NOSTEPS = 5
JOB_NOTEX = 6
LOCK_FAILED = 7
OTHERS = 8
When I run this with a restricted user I get a return of 8 from the submit rsbdcsub - has anyone seen this before and can you offer advice on how to solve it?.
I have also tried using JOB_SUBMIT with the following settings instead
CALL FUNCTION 'JOB_SUBMIT'
EXPORTING
authcknam = l_ernam
jobcount = l_jobcount
jobname = l_jobname
REPORT = l_report
VARIANT = l_variant
EXCEPTIONS
BAD_PRIPARAMS = 1
BAD_XPGFLAGS = 2
INVALID_JOBDATA = 3
JOBNAME_MISSING = 4
JOB_NOTEX = 5
JOB_SUBMIT_FAILED = 6
LOCK_FAILED = 7
PROGRAM_MISSING = 8
PROG_ABAP_AND_EXTPG_SET = 9
OTHERS = 10
and in this case get a return of 3 (INVALID_JOBDATA) - anyone any ideas as to how to resolve this?.

Hello Caroline,
I do not know whether this issue is resolved at your end. I faced a similar problem and found that User Type for the generic user(l_Ernam) was the cause.
We had initially defined User Type for the generic user as a 'Communication' and it was giving return code 8 after SUBMIT.
We later changed the User Type to 'System' and it worked as intended. Job was created under the name of the user who executed the main program and the steps added using the generic user(l_Ernam).
Please note that the user who is running the main program will need authorization to add job steps using the generic user.
With Kind Regards,
Jatin.

I need to reinstall CS2, downloaded from Adobe but when run get serial nr missing, even if I use the one Adobe is providing

Lost my laptop, and now I need to reinstall CS2, in order to install CS3. I downloaded CS2 from Adobe site but when I run the program I get an error message: Your Adobe Photoshop user name, or serial number is missing or invalid. The application cannot continue. I was using the serial nr that Adobe is providing on the CS2 download page.
Any help much appreaciated

You are on Windows 2000, you do not have a "Firefox" button, and should consider yourself to be fortunate in that you still have menus and don't have to do anything to get the menus back instead of the "Firefox" button. (The same applies to Windows XP users).
Use the "File" menu to get to Import. You are not on Windows 7 or Vista, and don't have to put up with the nonsense added for Aero.
If you want the "Firefox" button you can get it with View -> toolbars -> (uncheck) Menu Bar. The menu bar and the "Firefox" button were supposed to be mutually exclusive (which is impossible in some cases without being incompatible).
Once you are using the "Firefox" button ...
Use the "Alt" key to view the menu bar (temporarily) containing File, Edit, View, History, Bookmarks, Tools, and Help. On Windows 7 and Vista, the menu bar was hidden by default in Firefox 4 and above. These menu items are more or less available under the "Firefox" button which has the most used of the built-in Firefox menu items available in a different format.
To get back to having menus again. "Firefox" button -> Options (second column) -> (check) Menu Bar
You can make '''Firefox 7.0.1''' look like Firefox 3.6.*, see numbered '''items 1-10''' in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 thru 8.0, look like 3.6)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''
* http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface

Ambiguous-import-flow-from-multiple-connectors when running AD MA Full Sync

Similar Messages

Maybe you are looking for