AMC cost need to be captured in maintenance order for fleet equipments

Hi Guys,
Our requirement is for fleet equipments we need to capture all the cost like,Material,AMC.....etc in one order.
Normally we will create one mainteanance order for each equipment .When ever we post the consumption in Transaction:IFCU the cost of the fuel will be booked against the order.
But for AMC through maintenance plan we are creating the order.So, cost will be booked in this but not in the common order which we have created for fleet equipment.
How can i bring this AMC cost also in the maintenance order which we are creating for each fleet equipment?
Regards
Kumar

Hi Maheswaran,
Thxs for your inputs.But when i  create  the settlement profile with standing order as default object .This settlement profile will be assigned to the order type:PM03.This is will be default for this order type,but for preventive it should settle to the respective cost center.
How this can be handled?
Regards
Kumar

Similar Messages

  • Subsititute cost center, profit center, BA in maintenance order Addit.Tab

    Hello.
    I wonder if it's possible to substitute cost center, profit center, BA in maintenance order Addit.data Tab
    according to the WBS element
    I think, in maintenance order Addit data Tab (IW31),
    cost center and profit center is coming from work center.
    and business area is coming from equipment or functional location master which I input
    But the thing is WBS has that informaiotn(cost center, profit center, BA ) as well.
    and since we need to use the same information(cost center, profit center, BA )
    so Users need to change cost center, profit center, BA after checking WBS element information(CJ13)
    so, is there any way to substitute(or change) cost center, profit center, BA  automatically
    in maintenance order Addit.data TAB, when I input WBS element and press enter key?
    any help would be appreciated.
    Thanks

    Thank you for your reply
    Could you tell me more how to have a look at IWO10010 Maint. order
    (Cust. enhancement for determining WBS element)
    I'm kinda new in ABAP so please help me

  • Maintenance order for Refurbishment

    Dear Experts,
    I have created a maintenance order for the equipment E12000003 with order type PM01 and using the control key PM03.Material 12000003 representing the equipment E12000003 issued against the PM order .
    Purchase requisition is created at the background , which converted to PO and the material 12000003 issued to vendor through a deliver challan.
    Acceptance of service through service entry sheet and GR at the background.
    Confirmation of time for the order and GR for the PM order done .Settlement of the order against the material which issued against the order.
    We are planning to follow the above cycle instead of refurbishment process as we donu2019t want to have split valuation .  Please correct me if ia m wrong.
    Thanks,
    Ram

    Hi Ram,
    The method u are using is ok for some companies. But the following questions arise which are to be answered,
    1.How do you fix the cost of the refurbished material? will it be the original cost (cost, if bought from a vendor)
    2. You draw and use spare parts for refurbishing the eqpt. If the spare parts cost is more than the original equipment cost how do u account for it?
    3. The refurbished material must be certified to be as good as new, otherwise its cost must be split based on the condition. In your case all the time the cost will be same. Is it ok? Mind you once the refurbished material is returned to store, there is no replenishment and if the plant condition needs a new spare u do not have one!
    4. In the accounting it can happen that u refurbish few costly materials and in the end of the year return them to stores to bring down the maintenance cost vs budget. How these are controlled?
    But it does not mean the SAP way of refurbishment is an complete solution.
    regards,

  • Background Scheduling of Maintenance order for Calibration.

    Dear Experts,
    I want to scheule my calibration order in QM for calibration of Test Equipment in background.
    I have created my maintenance order for calibration of Gauges / Instruments (which are defined as Equipments). The dates for the calibration have been calculated based on time. When I go to the transaction of scheduling the order & save, the inspection lot for calibration is generated & the equipment task list is assigned to the lot.
    I want this to automatically happen in background. This is because I have thousands of equipments, for which I can not schedule the calibration manually.
    Regards,
    Prashant

    Hi,
    Please check below link if this can help it.
    http://help.sap.com/saphelp_scm2007/helpdata/en/c3/9e443cfb06e532e10000000a114084/content.htm
    Regards,
    Anil

  • Need to run AutoCreate FInal Assembly Orders for a Set of Orders

    Hi All,
    I Need to run AutoCreate FInal Assembly Orders for a Set of Orders, It can run for a Org or for a Single Order.
    How to Run it for set of Orders or Batch of orders.
    Thanks & Regards

    There is no seeded way to do this.
    At one client, we ended up creating a wrapper that accepted more parameters; built a order header cursor and calling the AutoCreate FA Orders for each order.
    Sandeep Gandhi

  • Create Maintenance Order for the Sub assembly and the top assembly together

    Hi
    We create repair order for an equipment when it comes for maintenance.
    We want to create repair/maintenance order for all the sub assemblies for the equipment along with the order for the top assembly at the same time.
    Appreciate your guidance.

    Dear Srini K
    Please create the order for the main equipment & create suborders for the sub assembly is one way to do it. so that main order & other orders may have link to each other.
    Another way if you want to store history that which are the assemblies are affected or you have worked on it you can enter these in all assemblies in object parts tab of the orders.
    Also you can create the notification & maintain the object parts code, Damage code & cause code for each assembly & sub assembly sothat you can keep history.
    But if you can tell me the business requiremennt it detailed i can guide you ini correct direction.
    I hope this will satify your requirement.
    Regards

  • Need Help on WRFMGROUP - Manage Maintenance Groups for articles

    Hi,
    Has anybody used WRFMGROUP-Manage Maintenance Groups for articles for seasonal procuremen article creation.
    I need this to update some article master fields ( like Listing procedure) while creating the article in the background.( WRFAPC11)
    Kindly help.
    Jajati

    Hi Jajati,
    you can use the Maitenance Group to define the fields you have to maintain. Therefore, create a maintenance group in transaction WRFMGROUP. Add the needed Field Groups to the maintenance group - the field group contains the article master fields you can fill when using this maintenance group.
    As far as I know, you can use the maintenance group in transaction WRFMATBODY after releasing the article in transaction WRFAPC11. I'm not sure, if you can use the maintenance group in the releasing process. In transaction WRFMATBODY, you can the fill in all the fields assigned to the field group.
    Hope it helps.
    Regards,
    Tobias

  • Need to MASS unlock LKD maintenance orders and then MASS LKD back again

    Hello,
    We need to make some MASS updates on our Maintenance orders, but I need to know if there is a program or transaction that will allow me to MASS unlock LKD maintenance orders so we can quickly make our changes and then MASS lock them back again.
    Pl suggest.
    Thanks & Regards
    Anil

    Try the ABAP forum

  • In ALE/IDOC Change Pointer using Maintenance order for message Type

    Hi All Expert,
    I am using Maintenace order to send via ALE/IDOC(Change ponters), i need standard message Name for Maintenance Order,

    Hello,
    I'm not sure you're taking the best approch.
    Usually when you need to migrate ISU contracts into an ISU-CRM integrated system, you first migrate everything you need in ISU through the VERY powerful migration workbench available (transaction code EMIGALL), and then you replicate your data to CRM via INITIAL download.
    That's definitely the strategy that will give you the best performance, and less work.
    Kind regards,
    Nicolas Busson.

  • Table for Preventive Maintenance Generated Maintenance Orders for Equipment

    Dear All,
                   I want to Extract no of Preventive Maintenance Orders (PM02) for a month (according to Planned Date)  for a set of Equipments.
                   Which table I should refer so i wll get the Orders with specific order type , for specific equipments for a month ( Date Range).
    With best regards,
    Narendra

    for that use the following tables for report generation:
    AFIH : for equipment number selection and order numbers
    AUFK: For order dates and other data
    T003P: for order type.
    In a single you will not get all the answers. You have to join three four table for this. try using these tables. Or also you can create a query for this using SQ01.

  • I need the care and service maintenance manual for pavilion dv6911 notebook

    In the last 2 weeks the lcd screen has quit on two notebooks of this model
    This question was solved.
    View Solution.

    Hi:
    Below is the Maintenance and Service Guide for your notebook.
    http://h10032.www1.hp.com/ctg/Manual/c01295877.pdf
    Your model series is covered under this manual.
    Paul

  • HT3462 does the person need to have an iphone in order for me to communicate with them?

    I want to text someone who doesn't have an iphone or internet on their phone, is it person to use ichat to contact them?

    Hi,
    You can use SMS if the person is in thre United States and uses the "right" carrier.
    Up to at least iChat 5 (Snow Leopard) the Computer could be set as if is were in the United States and the SMS options would show in the File Menu and Buddies menu of iChat.
    This is set in System Preferences > Language and Text  (in the Personal row before you get to the Security and Privacy/Firewall one)
    The phone number could then be added as if it were a Buddy to the Buddy list with a leading + 1 as in +1234567890.
    That phone has to be in the United States on one of these Carriers
    By the time Messages comes along in Mountain Lion the SMS menu items disappear even though the app can still send SMS to AIM "phone Buddies"
    I am not sure about OS X 10.7.x and iChat 6.x as I don't have a computer that can run that version at the moment (well I do but it is running Mountain Lion)
    9:44 PM      Sunday; March 3, 2013
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Need correct Win 7 driver installation order for Satellite P500/01G

    Hi,
    I have a Toshiba Satellite P500 and had to replace HDD after it was dropped by son.
    I dont have the recovery disc so i loaded Win 7 from image on USB.
    I down loaded all the drivers but have been frustrated by a few things.
    The webcam seems to be impossible to get working despite trying every fix i could find online and some devices unkown in device manager.
    The Toshiba site lists multiple audio,display and wireless cards wgich makes it hard to know the correct driver to install.
    I needd a correct driver list and the order they should installed in
    Model is Satellite P500/01G (PSPGSA-01G003)
    windows 7 32 bit
    Cheers

    Hi
    I have Satellite P500 too and Im really satisfied with it. I hope you are also happy with your machine.
    To be honest I think you should use it with original Win7 64bit version.
    As I can see you have an Australian model. I have UK model but I think installation order must be the same. So here it is:
    Windows 7
    Intel Chipset SW Installation Utility
    Intel Management Engine Interface
    Display Driver
    Intel Turbo Boost Technology Driver
    Intel Rapid Storage Technology Driver
    TOSHIBA Supervisor Password Utility
    TOSHIBA HW Setup Utility
    TOSHIBA Value Added Package
    Card Reader Controller
    NVIDIA HD Audio Driver
    Conexant Audio Driver
    Wireless LAN Driver
    Synaptics Touch Pad Driver
    TOSHIBA HDD Protection
    Bluetooth Stack for Windows by Toshiba
    LAN Driver
    YUAN DVB-T/ATSC Tuner Driver
    TOSHIBA USB Sleep and Charge Utility
    TOSHIBA Face Recognition
    TOSHIBA eco Utility
    TOSHIBA HDD/SSD Alert
    TOSHIBA Service Station
    HDMI Control Manager
    TOSHIBA Remote Control Manager
    TOSHIBA Fingerprint Utility
    PatchFiles FixFPService_REG_1.0
    ConfigFree
    TOSHIBA Assist
    TOSHIBA Web Camera Application
    TOSHIBA Extended Tiles for Windows Mobility Center
    TOSHIBA Folder Migrating Utility
    PatchFiles
    If some listed driver is not available for download just continue with next one.
    Good luck

  • Create Maintenance Order for Object Link

    how can I create a notification or order through an object link?
    it doesn't work here. it doesn't use object link number in order.

    Greetings Daniel,
    It's not possible to create a Notification or Order for the Object link - unless you create a technical object for the object link itself, which is entirely possible in CN04 / CN07 (for example, a cable connects 2 circuits - create 3 FLs and 1 Object Link, assign the cable FL as the link itself)

  • My macbook sometimes needs to be plugged in, in order for it turn on.

    So sometimes when I open my macbook it wont turn on. I push the power button, close and reopen it but the only way it will turn on is if I connect the power cord. I know the battery is not dead because once I does turn on I look at the battery and its usually in the 50% or up range. Today when it happened I plugged it in and the battery icon had an X in it. I unplugged the cord and my mac just turned off. I plugged it back in and got another X in the battery icon. After a few minutes it returned to normal and started charging. Any Ideas of what is wrong with my mac.

    Here is the battery info
    Charge Information:
      Charge Remaining (mAh):          5483
      Fully Charged:          No
      Charging:          No
      Full Charge Capacity (mAh):          5826
      Health Information:
      Cycle Count:          714
      Condition:          Normal
      Battery Installed:          Yes
      Amperage (mA):          -1079
      Voltage (mV):          12248

Maybe you are looking for

  • My old laptop crashed and I have a new one, but I still have the old hard drive, can I get my old bookmarks from it?

    My old laptop broke and I had to buy a new one. I have recovered all data from the old hard drive and want to know if I can recover my old Firefox bookmarks from it as well? I have put Firefox 4 onto my new machine, but cannot find a way to import th

  • Frame bullets not displaying correctly in RoboHelp output

    I imported a FrameMaker book into RoboHelp and tried to convert it to an epub file. Can someone help with the following questions? 1. Why does the bullet format get converted as an n character? How do you work around this? 2. Why do the table of cont

  • LR4 Custom book sizes

    Hello, I've read several times that the only way to get a custom book size in the book module is to edit/create one in Illustrator or Scribus. In this interview with Kevin Tieskoetter he mentions that he would be documenting this process, so I imagin

  • Working with external assets

    I remember in previous versions of FW that you could impot a PSD to the library as an imported external asset, place it on the canvas and then if you made any changes to the original PSD, update the asset to see the changes reflected in FW. Some wher

  • Bytes to image at server

    Hi I am doing client server application which send image from client to server... i am able to send image bytes from client to server ..But at server I am not able to display image which i sent from client............. Can you guys plz tell how i can