AMD A8-4500M APU with Radeon HD Graphics -overheat?

Hello, I have a lap top HP ProBook 455 G1
AMD Elite Quad-Core A8-4500M 1,90 GHz
AMD Radeon HD 7640G + HD 8750M Dual Graphics
Why are we in this program shows that the CPU temperature is high? And if it's at all possible.
The computer does not reset,operating normally.
http://prntscr.com/2f7858
http://prntscr.com/2f7909
http://prntscr.com/2f78gl
And these are the temperature when not doing anything on their computers
http://prntscr.com/2f78km
While this program not only detects high temperature
http://prntscr.com/2f7a9w
I am from Serbia, and since the computer is under warranty, I sent it to an authorized HP service.
http://h41191.www4.hp.com/servisi/
I sent in
NET Computer Engineering
Novi Sad, Braće Ribnikar 52
Tel: +381 (21) 421 111
They returned my computer back and said that everything was fine.
Do I have to worry about and with which program can accurately read the temperature?
This question was solved.
View Solution.

Hi Maxi69:
Welcome to the forum!
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/ .
I hope this helps.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Similar Messages

HP G7-2251dx - AMD A8-4500M APU with Radeon Processor upgrade?

Hello, I am looking to upgrade my laptop's processor, but I don't know what type will work on it. The laptop model is hp g7-2251dx. Also, is there a way for me to swith the standard keyboard for a backlit keyboard? Any help at all is appreciated.
This question was solved.
View Solution.

Hi,
The second manual of the following link will answer your questions. You can find the first answer on page #1. Please note, you have to check BIOS before upgrading CPU. For the second question, no available part for your machine (page #45) that means no connectors for you to plug all the lights of a backlit keyboard.
http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&lc=en&product=5336987
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Processor Upgrade-AMD A6-5350M APU with Radeon(tm) HD Graphics, 2900 Mhz, 2 Core(s)

Hi. I was wondering if my Thinkpad Edge E545 w/ Processor AMD A6-5350M APU with Radeon(tm) HD Graphics, 2900 Mhz, 2 Core(s), 2 Logical Processor(s), can be upgraded. If so, what is the best upgrade option?. ???? Also, what is the socket type?

itbane wrote:
Sorry fore double-posting, but there's something new:
At beginning, the PC continued booting after throwing this issue. But now, Booting sometimes just stops at the very moment when the CPU is not responding.
...sounds like a hardware problem to me given the sporadic nature.

Amd a8- 4555m apu with radeon(tm) hd graphics

i just bought 1 month ago HP Pavilion 15-n276sa, but i use corel draw and its too slow
is there any chance i can uprgade my processor to better one or what should i do
(amd a8- 4555m apu with radeon(tm) hd graphics)
thank you

Hello esignshop,
Welcome to the HP Forums, I hope you enjoy your experience!
I understand that your notebook computer is behaving slowly after a month of use, and I would be happy to assist you in this matter!
Since the processor on your notebook is integrated into the motherboard, I recommend following this document on Improving System Performance without Adding Memory (Windows 8). This should help improve the speed and efficiency of your computer's system without having to replace the entire motherboard with the processor.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Adobe premiere cs6 crash with AMD A8-5600k APU whit Radeon HD

Hello everyone, I am writing because every time I do a rendering with adobe premiere cs6 me pc crashes, blue screen error, or turns off and ariavvia from nothing ..
and I noticed that this problem from me especially when laoro with avchd files (. mts) because I tried to do with rendering. avi file and the problem seemed solved
I have a windows 7 ultimate 8gb ram - AMD A8-5600K APU with Radeon HD graphics
with 4.30Ghz processor
Help me thanks in advances! cheap to make!

That MAY be a hardware error... since video editing stresses all components
Read Bill Hunt on BSOD http://forums.adobe.com/thread/772169

I am running Photoshop CC 2014 on Windows 8.1 with an AMD quad core processor and AMD E1-2100 APU with AMD Radeon HD 8210 Graphics Card. I have installed the latest driver version 13.152.0.0. When I activate puppet warp, the mesh appears over the image an

I am running Photoshop CC 2014 on Windows 8.1 with an AMD quad core processor and AMD E1-2100 APU with AMD Radeon HD 8210 Graphics Card. I have installed the latest driver version 13.152.0.0. When I activate puppet warp, the mesh appears over the image and I can place the first pin. However, when I go to add the second pin, Photoshop crashes. I have tried with on a new, blank file, with just a few lines on it, but, as soon as I place the first pin, the image disappears, and then, as soon as I click anywhere else in the image, Photoshop crashes. I have followed all the online advice about settings under the Preferences/Performance interface, but nothing fixes the problem. Can anyone please help?

BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, such as total installed RAM, scratch file HDs, video card specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
A screen shot could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

A8 3850 APU with HD-6550D Graphics Driver

Members of the HP forum, I have a HP Pavilion Series Model No p7-1254 desktop.It came with a AMD-A6-3620 2.20Ghz processor with a integrated graphics, (Radeon HD 6530D). I have up-graded to a A8 3850 APU 2.9Ghz also with a intergrated graphics (Radeon HD 6550D). The problem I'm having is that I get an error message, no graphics driver. My device manager tells me that I 'm up to date on the driver and yet I see a date of the graphics driver Microsoft 1996 (must be generic). I do not have a second graphics card installed at this time. I'm unable to located a driver for the A8 3850/HD 6560D if there is one.. I'm unable to correct the display settings also at this time. I have not reverted back to the original processor to see if everything would be back to there original settings.The A8 3850 APU is a approved up-graded for the p7-1254 PC with the FM1 socket and Holly motherboard.............What I'm I doing wrong ?...................... Maybe I'm drinking way too many gallons of coffee and the stupid's are creeping in................ Thank You in advance for any help you can give me with my problem. Koppa.

Please try downloading and installing the AMD Chipset Driver and the AMD Catalyst Display Driver for your A8-3850 CPU.
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

HP Pavilion 15 notebook pc AMD A6-5200 APU with USB Problem

Hi there,
I bought a laptop "HP Pavilion 15 notebook pc with AMD A6-5200 APU and product number E8A72UA#ABA with window 8 on it but suddenly something went wrong that I had to formate it.
But since then, all my USB had stop functioning I could'nt find the driver for the USB. please somebody help me.
Thanks

Hi:
Windows 8 is supposed to have the USB drivers incorporated in its driver database.
The only suggestion I can offer, would be to install the chipset driver directly from AMD and see if that restores functionality to the USB 3 ports.
http://support.amd.com/en-us/download/chipset?os=Windows%208%20-%2032

Problems with AMD A8-6410 APU with ATI AMD Radeon R5 Graphics

Hi.
I have problems with the graphics card driver Ati Radeon R5. I have a HP 15 - g012dx , from one moment to another , the driver stopped working. I have to disable this driver for the video work properly. I installed the drivers that brings the HP Recovery Manager:
* AMD HD Graphisc Driver:
-version 13.351.1105.1001
-version 13.351.1105.1005
Prove also unsuccessfully with these drivers :
* amd - catalyst- 14.7 - rc3 -windows- aug12
* amd - catalyst- 15.3beta - 64bit - win8.1 - mar20
* sp67327
* sp69615
PLEASE help me to resolve this problem
thanks
DISABLE DRIVER (VIDEO REGULAR)
ACTIVE DRIVER (VIDEO PROBLEMS)

Install the driver that is available either by download from the HP support portal download section or the HP Recovery manager. You can access the Recovery Manager while logged into Windows or by booting to the usb recovery media you should have created by now.
Try the following HP graphics softpaq version 13.152.1.3000. The HP softpaq will also reinstall the notebook's chipset drivers.
http://ftp.hp.com/pub/softpaq/sp64001-64500/sp64482.exeversion
Do not install drivers from AMD.
If you read the fine print at AMD, you will find that AMD cautions you that it is best to use the notebook manufacturer's drivers.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

AMD display drivers for A8-3500M APU with Radeon Graphics

Hey guys, I hope you're all doing well today!
I have recently installed a fresh version of Windows 7 on my laptop and I'm having a bit of a strange experience with Windows Update.
I went to the AMD website and downloaded the latest version (4/15/14) of the diplay driver that is for my processor and display card; things seemed to work great, however when I ran Windows update there was an "optional update" for the same driver from 2011! I mean, to me that is absurd! Why is this showing up? Have I done something incorrectly?
anyway I have a HP Pavilion dv6, 8gb ram, 64-bit, SP1, yada-yada.

Hey @SparkyCompTech ,
Welcome back to the HP Forums!
I see you have questions about the optional Windows update for your graphics card drivers.
The Windows updates are not meant to be the most recent drivers for your product. You will always find the most recent drivers from the manufacturers website, hence why most of these type of updates are entirely optional. You have done nothing wrong.
If you wish, you can hide the optional update.
To hide updates in Windows 7:
1. Click Start.
2. Type Update in the search.
3. Click Windows Update.
4. Click Check for updates.
5. Click on # important updates are available. Where # is the number of available updates.
6. Right click on the update and choose Hide update. If the update is not shown, click the Optional tab on the left.
Hopefully this helps!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Installing Windows 7 on 2009 iMac with Radeon 4850 graphics (Guide)

Howdy
(This was originally posted in the iMac forum by me as a reply to a Windows 7 question, but I figured it may be useful here too. This may be adjustable to work on other 2009 series macs, but I make no promises. If anyone has any tips on how to get the things working that I mentioned as not, feel free to reply. I would love keyboard volume control specifically :p)
I was able to get Windows 7 64bit installed on my 2009 iMac. I was expecting it not to work, but in the end it did (with surprisingly little effort)
I have the following iMac:
Early 2009 iMac
3.06 GHz
4GB Ram
Radeon 4850
How to get video to work:
1) Download latest "desktop" video drivers from ATI's site (I used catalyst 9.7)
32 bit: http://game.amd.com/us-en/drivers_catalyst.aspx?p=win7/windows-7-32bit
64 bit: http://game.amd.com/us-en/drivers_catalyst.aspx?p=win7/windows-7-64bit
2) Run MobilityModder from the following link: http://www.driverheaven.net/modtool.php
3) Follow the directions on the page (When it sais Vista only, that means Win7 too)
How to get audio to work:
1) Download exe installer from the following page: http://www.realtek.com.tw/downloads/downloadsCheck.aspx?Langid=1&PNid=24&PFid=24 &Level=4&Conn=3&DownTypeID=3&GetDown=false
2) Run the installer
Things that do work
Video (Built in version isn't the best, follow directions above)
Audio (Built in version doesn't work, follow directions above)
Wireless Internet (Built in)
Wired Internet (Built in)
Bluetooth (mouse and keyboard) (Built in)
Things that I haven't figured out
1) How to get the 64bit apple software frontend to install (the taskbar icon)
2) How to get volume keys to work (the apple keyboard driver actually is worse than default)
3) Things like changing brightness (but I would assume this would go with getting the apple frontend software to work)
Comments
1) It is blazing fast
2) While this works on 64bit, I don't think 32bit would be much different to setup
3) Using the latest ATI drivers are important because they support the new Windows 7 driver model (WDDM 1.1). While older versions may work (like bootcamp 2.1), they won't be the most advanced or fastest performing.
4) While I haven't been able to install the bootcamp software (Win7 warns that it is incompatible), from what I've read (all the posts about DPC latency), it is probably better off for performance
5) Your mileage may vary, I haven't tested this on anything other than my 24" radeon 4850 iMac. I also haven't tested it on 32bit, so don't blame me if something doesn't work right. Basically, if you break something it isn't my fault
6) Bluetooth pairing is somewhat quirky, it usually goes pretty quickly for the mouse. Sometimes it will take multiple tries (canceling out, and starting again, etc) especially for the keyboard. Once everything is paired though it works perfect without any extra drivers.
7) Remember this isn't supported by Apple yet.

Hi Beta_,
If you are looking for assistance in setting up Windows 7 in Bootcamp on your iMac running Mavericks, you may find the following articles helpful:
Mac Basics: Using Windows on your Mac via Boot Camp
http://support.apple.com/kb/ht1461
OS X Mavericks: Use Windows 7 or Windows 8 on your Mac
http://support.apple.com/kb/PH14129
Regards,
- Brenden

Is the latest version of FCP studio compatible with Radeon X1600 graphics..

I read under the requirements that the latest version of FCP studio is not compatible with "integrated graphics cards"... what does that mean to me with an iMac that has a Radeon X1600 with 128MB and a bus type PCIe? Will it work?
Thanks!

Final Cut Studio 2 (with FCP 6) runs just fine on my 2.0 GHz 20" iMac CD, which has a 128 MB ATI Radeon X1600 with an external display (1280x1024) connected via DVI.

Have an HP Pavilion DV7 with Radeon HD6490M Graphics Card. Photoshop doesn't recognize it.

Photoshop CC doesn't recognize my other video card, which is a Radeon HD6490M. Can't utilize 3D tools. Is there something wrong with this particular video card that won't allow it to be recognized?

Here's one idea although it is for a DV6.
First off, reboot and press F10 to go into your BIOS.
Switch the Graphics settings from "dynamic" to "fixed". This will ensure that your computer will not use the default Intel card. I'm not sure why, but it seems as though Rage kept using that card regardless of my settings in Windows.
Gene

Anyone using AP2 on a 2Ghz G5 with Radeon 9600 graphics?

I had high hopes for v1.5 but it just ran too slow on my G5 to be usable. I hoped to upgrade the card to an x800 xt but after being on order through B&H for six months or so with the estimate of availability "within the next 2 weeks" for that whole time, I finally gave up and got my money back from B&H and gave up on Aperture.
I have now ordered V2, and I'm hopeful it will be - if not fast - at least usable now on my 2Ghz G5 with the 9600 card. (3GB ram)
Is there anyone using it with this configuration who could provide me with some feedback?
Much appreciated!
Forrest Smyth

I got a 2x2.5Ghz PowerMac G5, 2 GB RAM, with a 23" Apple Display, and a ATI Radeon 9600 XT..
I also found Ap1.5 to be a bit to slow, but I just stuck with it.. I have now installed the trail version of Ap2.0 and its quite noticeably faster, fast enough for me to keep this Mac for a while longer (unless it breaks)..
Im not entirely sure, but it seems that it takes a bit longer to fully load an image (Nikon D80 RAW files) then in Ap1.5.. but thats not to bad, just use quick view mode to browse around.. and then work on the images you want to work on.
As I said it all works faster, straightening can now actually be done in near real-time
and all the other sliders (even highlight & shadows) are far more responsive..
now I must say this is in an aperture library with only about 200-300 images.. I hope it will stay as fast when I get the full version and get all my 30,000 images in it.

I have my macbook pro 17" 2.5 Q.C. i7,750GB HDD 5400rpm, 4gb ram, amd radeon 1gb dedicated graphics with intel hd graphics 3000,antiglare screen when i turned on my laptop and see the specs is not showing the 1gb graph. only 512mb.

i have my macbook pro 17" 2.5 Quad. Core. i7,750GB HDD 5400rpm, 4gb ram, amd radeon 1gb dedicated graphics with intel hd graphics 3000,antiglare screen when i turned on my laptop and see the specs is not showing the 1gb graph. only 512mb is there anybody out there have the same problem please how can i know or is there any other way to be sure what's the real capacity of my graphics?take note this is brand new late 2011 model made to customize MD311 with anti glare screen...

I have the same machine, except it's running the blessed fast Snow Kitty,
"when I turn on my laptop and see the specs is not showing the 1gb graph, only 512mb is there"
What specs are you refering about?
Hold the command shift and 4 keys down, draw a box around what your seeing and upload the desktop image in your post response here.

AMD A8-4500M APU with Radeon HD Graphics -overheat?

Similar Messages

Maybe you are looking for