Amd a8- 4555m apu with radeon(tm) hd graphics

i just bought 1 month ago HP Pavilion 15-n276sa, but i use corel draw and its too slow
is there any chance i can uprgade my processor to better one or what should i do
(amd a8- 4555m apu with radeon(tm) hd graphics)
thank you

Hello esignshop,
Welcome to the HP Forums, I hope you enjoy your experience!
I understand that your notebook computer is behaving slowly after a month of use, and I would be happy to assist you in this matter!
Since the processor on your notebook is integrated into the motherboard, I recommend following this document on Improving System Performance without Adding Memory (Windows 8). This should help improve the speed and efficiency of your computer's system without having to replace the entire motherboard with the processor.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Similar Messages

  • Processor Upgrade-AMD A6-5350M APU with Radeon(tm) HD Graphics, 2900 Mhz, 2 Core(s)

    Hi.  I was wondering if my Thinkpad Edge E545 w/ Processor AMD A6-5350M APU with Radeon(tm) HD Graphics, 2900 Mhz, 2 Core(s), 2 Logical Processor(s),  can be upgraded.  If so, what is the best upgrade option?.   ????  Also, what is the socket type?

    itbane wrote:
    Sorry fore double-posting, but there's something new:
    At beginning, the PC continued booting after throwing this issue. But now, Booting sometimes just stops at the very moment when the CPU is not responding.
    ...sounds like a hardware problem to me given the sporadic nature.

  • AMD A8-4500M APU with Radeon HD Graphics -overheat?

    Hello, I have a lap top HP ProBook 455 G1
    AMD Elite Quad-Core A8-4500M 1,90 GHz
    AMD Radeon HD 7640G + HD 8750M Dual Graphics
    Why are we in this program shows that the CPU temperature is high? And if it's at all possible.
    The computer does not reset,operating normally.
    http://prntscr.com/2f7858
    http://prntscr.com/2f7909
    http://prntscr.com/2f78gl
    And these are the temperature when not doing anything on their computers
    http://prntscr.com/2f78km
    While this program not only detects high temperature
    http://prntscr.com/2f7a9w
    I am from Serbia, and since the computer is under warranty, I sent it to an authorized HP service.
    http://h41191.www4.hp.com/servisi/
    I sent in 
    NET Computer Engineering 
    Novi Sad, Braće Ribnikar 52
    Tel: +381 (21) 421 111
    They returned my computer back and said that everything was fine.
    Do I have to worry about and with which program can accurately read the temperature?
    This question was solved.
    View Solution.

    Hi Maxi69:
    Welcome to the forum! 
      I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/ .
    I hope this helps.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • HP G7-2251dx - AMD A8-4500M APU with Radeon Processor upgrade?

    Hello, I am looking to upgrade my laptop's processor, but I don't know what type will work on it. The laptop model is hp g7-2251dx. Also, is there a way for me to swith the standard keyboard for a backlit keyboard? Any help at all is appreciated. 
    This question was solved.
    View Solution.

    Hi,
    The second manual of the following link will answer your questions. You can find the first answer on page #1. Please note, you have to check BIOS before upgrading CPU. For the second question, no available part for your machine (page #45) that means no connectors for you to plug all the lights of a backlit keyboard.
       http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&lc=en&product=5336987
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Adobe premiere cs6 crash with AMD A8-5600k APU whit Radeon HD

    Hello everyone, I am writing because every time I do a rendering with adobe premiere cs6 me pc crashes, blue screen error, or turns off and ariavvia from nothing ..
    and I noticed that this problem from me especially when laoro with avchd files (. mts) because I tried to do with rendering. avi file and the problem seemed solved
    I have a windows 7 ultimate 8gb ram - AMD A8-5600K APU with Radeon HD graphics
    with 4.30Ghz processor
    Help me thanks in advances! cheap to make!

    That MAY be a hardware error... since video editing stresses all components
    Read Bill Hunt on BSOD http://forums.adobe.com/thread/772169

  • I am running Photoshop CC 2014 on Windows 8.1 with an AMD quad core processor and AMD E1-2100 APU with AMD Radeon HD 8210 Graphics Card. I have installed the latest driver version 13.152.0.0. When I activate puppet warp, the mesh appears over the image an

    I am running Photoshop CC 2014 on Windows 8.1 with an AMD quad core processor and AMD E1-2100 APU with AMD Radeon HD 8210 Graphics Card. I have installed the latest driver version 13.152.0.0. When I activate puppet warp, the mesh appears over the image and I can place the first pin.  However, when I go to add the second pin, Photoshop crashes. I have tried with on a new, blank file, with just a few lines on it, but, as soon as I place the first pin, the image disappears, and then, as soon as I click anywhere else in the image, Photoshop crashes. I have followed all the online advice about settings under the Preferences/Performance interface, but nothing fixes the problem. Can anyone please help?

    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, such as total installed RAM, scratch file HDs, video card specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
    A screen shot could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • HP Pavilion 15 notebook pc AMD A6-5200 APU with USB Problem

    Hi there,
    I bought a laptop "HP Pavilion 15 notebook pc with AMD A6-5200 APU and product number E8A72UA#ABA with window 8 on it but suddenly something went wrong that I had to formate it.
    But since then, all my USB had stop functioning I could'nt find the driver for the USB. please somebody help me.
    Thanks

    Hi:
    Windows 8 is supposed to have the USB drivers incorporated in its driver database.
    The only suggestion I can offer, would be to install the chipset driver directly from AMD and see if that restores functionality to the USB 3 ports.
    http://support.amd.com/en-us/download/chipset?os=Windows%208%20-%2032

  • Imac with radeon x 1600 graphics card will not send signal to projector

    I am using an Imac running Boot Camp. The Imac has a Radeon X 1600 graphics card. I have installed the latest driver in XP. The Device manager recognizes the correct card.
    The problem: I cannot get our projector to pick up the signal from the Imac. I have systematically gone through all the display settings. Others who have similar problems seem to have graphics cards with additional software that allows them to select a clone display feature.
    Any thoughts? The projector works fine with a macbook running bootcamp (xp).

    Hi Cathy and welcome to Discussions,
    sounds to me as if you are missing the Catalyst Control Center, which usually provides these kinds of setting.
    You can download both Drivers and the Control Center from the ATI/AMD website here: http://ati.amd.com/support/drivers/mac/bootcamp-xp.html
    The Control Center needs a Windows where the .NET Framework (2.0 at least) is already installed before installing the Control Center, otherwise it does not work.
    You can download that from Microsoft http://www.microsoft.com/downloads/details.aspx?FamilyID=0856eacb-4362-4b0d-8edd -aab15c5e04f5&displaylang=en
    Hope it helps.
    Good Luck
    Stefan

  • Problems with AMD A8-6410 APU with ATI AMD Radeon R5 Graphics

    Hi.
    I have problems with the graphics card driver Ati Radeon R5. I have a HP 15 - g012dx , from one moment to another , the driver stopped working. I have to disable this driver for the video work properly. I installed the drivers that brings the HP Recovery Manager:
    * AMD HD Graphisc Driver:
    -version 13.351.1105.1001
    -version 13.351.1105.1005
    Prove also unsuccessfully with these drivers :
    * amd - catalyst- 14.7 - rc3 -windows- aug12
    * amd - catalyst- 15.3beta - 64bit - win8.1 - mar20
    * sp67327
    * sp69615
    PLEASE help me to resolve this problem
    thanks
    DISABLE DRIVER (VIDEO REGULAR)
    ACTIVE DRIVER (VIDEO PROBLEMS)

    Install the driver that is available either by download from the HP support portal download section or the HP Recovery manager. You can access the Recovery Manager while logged into Windows or by booting to the usb recovery media you should have created by now. 
    Try the following HP graphics softpaq version 13.152.1.3000. The HP softpaq will also reinstall the notebook's chipset drivers.
    http://ftp.hp.com/pub/softpaq/sp64001-64500/sp64482.exeversion
    Do not install drivers from AMD.
    If you read the fine print at AMD, you will find that AMD cautions you that it is best to use the notebook manufacturer's drivers.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • AMD display drivers for A8-3500M APU with Radeon Graphics

    Hey guys, I hope you're all doing well today!
    I have recently installed a fresh version of Windows 7 on my laptop and I'm having a bit of a strange experience with Windows Update.
    I went to the AMD website and downloaded the latest version (4/15/14) of the diplay driver that is for my processor and display card; things seemed to work great, however when I ran Windows update there was an "optional update" for the same driver from 2011! I mean, to me that is absurd! Why is this showing up? Have I done something incorrectly?
    anyway I have a HP Pavilion dv6, 8gb ram, 64-bit, SP1, yada-yada.

    Hey @SparkyCompTech ,
    Welcome back to the HP Forums!
    I see you have questions about the optional Windows update for your graphics card drivers.
    The Windows updates are not meant to be the most recent drivers for your product. You will always find the most recent drivers from the manufacturers website, hence why most of these type of updates are entirely optional. You have done nothing wrong.
    If you wish, you can hide the optional update.
    To hide updates in Windows 7:
    1. Click Start.
    2. Type Update in the search.
    3. Click Windows Update.
    4. Click Check for updates.
    5. Click on # important updates are available. Where # is the number of available updates.
    6. Right click on the update and choose Hide update. If the update is not shown, click the Optional tab on the left.
    Hopefully this helps!
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • Radeon R5 (VGA) Graphics Driver

    Hello,
    on my laptop  hp 15-g049au (K5B45PA)  graphics driver is 
    amd quad-core a8-6410 apu with Radeon R5 
    So, from where i can install this vga driver on my Windows 7  32Bit
    due to this Screen Brightness and funcation not working (  fn + f2).. screen at max brightness....
    so pls help to install vga graphics driver of  Randeon R5.
    Thnks
    This question was solved.
    View Solution.

    Hi:
    See if this works...
    Download and run the W8.1 graphics driver from your model's support page...Close out of any error windows.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-135683-1&cc=us&dlc=en&lc=en...
    Go to the device manager and click to expand the Display Adapters category.  Click on the Standard VGA Adapter.  Click on the Driver tab.  Click on Update Driver.
    Select the Browse my computer for driver software method and browse to the driver folder that was created when you ran the file.
    That folder will be located in C:\SWSetup\sp67327.  Make sure the Include Subfolders box is checked and see if the driver installs that way.  Then reboot.
    If the graphics driver was succesfully installed, you should now be able to adjust the screen brightness and the webcam should work as well.

  • Dual graphic options with AMD A8-4555m+RADEON HD 7600G

    Hi,
         New HP user here, I had a HP Pavilion TouchSmart 15-b153cl for a couple of months, enjoyed it so far. I have read reports on better game dev support for AMD crossfire recently. I'd like to know what upgrade options are there.  From what I have learned so far, Radeon HD 8550M is available for a very similar notebook 15-b105la.  
    Soldering is not a problem, but I am more concerned about motherboard capability, voltage, frequency, heat... 
    The laptop is working well, and the upgrade is not top priority(causal gamer, sorry if I offended other"causal gamers").I think a notebook with the a touchscreen and window 8(Yes, its a plus for me) deserves a little bit more power.
    Any input will be appreciated and hopefully the discussion will benefit more user here.
    Thanks for reading.
    Specs:
    AMD A8-4555m+RADEON HD 7600G
    Chipset
    Northbridge
    AMD A55/A60M/A88 FCH rev. 00
    Southbridge
    AMD A55/A60M rev. 11
    Graphic Interface
    PCI-Express
    PCI-E Link Width
    x0
    PCI-E Max Link Width
    x0
    Memory Type
    DDR3
    Memory Size
    8 GBytes
    Channels
    Dual
    Memory Frequency
    672.7 MHz (3:20)
    CAS# latency (CL)
    9.0
    RAS# to CAS# delay (tRCD)
    9
    RAS# Precharge (tRP)
    10
    Cycle Time (tRAS)
    24
    Bank Cycle Time (tRC)
    33
    Uncore Frequency
    908.2 MHz
    This question was solved.
    View Solution.

    Hi,
    They use 2 different mother/system boards as shown:
        http://partsurfer.hp.com/Search.aspx?SearchText=D1E42UA
    and
       http://partsurfer.hp.com/Search.aspx?SearchText=C7B34LA
    You have to buy new motherboard or in short new machine. Normally we have to make decision before buying a laptop. Changing HDD, adding RAM or sometimes CPU but only a very, very, very small % of laptops which allow users to upgrade video card.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I have my macbook pro 17" 2.5 Q.C. i7,750GB HDD 5400rpm, 4gb ram, amd radeon 1gb dedicated graphics with intel hd graphics 3000,antiglare screen when i turned on my laptop and see the specs is not showing the 1gb graph. only 512mb.

    i have my macbook pro 17" 2.5 Quad. Core. i7,750GB HDD 5400rpm, 4gb ram, amd radeon 1gb dedicated graphics with intel hd graphics 3000,antiglare screen when i turned on my laptop and see the specs is not showing the 1gb graph. only 512mb is there anybody out there have the same problem please how can i know or is there any other way to be sure what's the real capacity of my graphics?take note this is brand new late 2011 model made to customize MD311 with anti glare screen...

    I have the same machine, except it's running the blessed fast Snow Kitty,
    "when I turn on my laptop and see the specs is not showing the 1gb graph, only 512mb is there"
    What specs are you refering about?
    Hold the command shift and 4 keys down, draw a box around what your seeing and upload the desktop image in your post response here.

  • Satellite C850D-B600 - troubles with AMD Radeon HD 7310 Graphics

    Hi,
    I have laptop Toshiba Satellite C850D-B600 with AMD Dual-Core Processor E1-1200 CPU with AMD Radeon™ HD 7310 Graphics
    I tried the last version in the official site and I tried AMD Official Site and I got massage says (the version of your graphics adapter is not supported) and when I tried to install Toshiba driver the graphic card does not work too.
    When I tried to open AMD vision engine control centre I got this massage says (AMD vision engine control center cannot be started there are currently no settings that can be configured using AMD vision engine control center).
    Please could you help me :(

    Hi
    May I ask you what system did you install and what driver did you try to install from Toshiba driver page?
    It seems that this notebook Satellite C850D-B600 was released without any preinstalled Windows system and therefore it would be useful to know what system you are using.
    You should also know that the Radeon HD 7310 graphic is a part of CPU. Yes, this is not external graphic unit but its intergraded in CPU.
    Regarding the AMD vision engine control center
    >AMD vision engine control center cannot be started there are currently no settings that can be configured using AMD vision engine control center
    The AMD Vision Control Center offers additional CPU monitoring options from within the Control Center. I think the above message appears because there are no settings which could be configured. But this does not mean that the driver would not work.

  • Full HD 3D with Mac mini/AMD Radeon HD 6630M graphics?

    I am able to output full HD 3D (1080p frame packing) with my 2011 MacAir. I used SwitchResX to define a new resolution of 2205 x 1920 for a 3D beamer that is connected via an HDMI adapter. The beamer recognizes this format as 3D and displayes the 2 packed frames as 3D.
    I wonder if the same is possible with the Mac mini with AMD Radeon HD 6630M graphics. It SHOULD work the same way, but only if this is ensured, I will buy one.

    Hi skampi77,
    here are the SwitchResX settings that work for an Onkyo AV receiver, and for an JVC 3D beamer (sorry for the German):
    I connected the 3D beamer either directly or via the Onkyo AV receiver to the HDMI or (via an adapter) to the DVI output of the Mac mini. And, indeed, the output is in both cases HDMI 1.4a.
    I can output full HD 3D images and video. For slide shows, I use a beta version of Graphics Converter v8 ( I asked Torsten Lemke to implement the frame packing format. Please contact him to get access to the beta version, even for testing purposes). This version has in the slide show settings a box "convert output to frame packing" that has to be checked. For video, I use Bino <http://bino3d.org>. In Bino frame packing output is one of the options.
    In both cases, one has to switch to the frame packing format before Graphics Converter or Bino is started.
    It is helpful to use one of the outputs (DVI or HDMI) for the "control screen", and the other for the 3D output that is switched to full HD frame packing format.
    I hope this helps.
    Cheers, Reiner

Maybe you are looking for