Amd Athlon Xp 2800+@2.25ghz

I have just oced my athlon xp 2800+ to 2.25ghz and its at a stable temp of 32 degrees. This being my first overclock im quite happy. . Its at 180 fsb and 12.5 multiplier. The only thing is that when i right click on my computer and look at properties, it tells me thats its internal clock is 2.25ghz but it doesnt tell me its speed, AMD style i.e. 3000+ or whatever it is. If someone knows what it is now can u tell me.
Also i think my gc is underclocked. Its Agp clock value is at 66mhz. Is this what its meant to be or is it underclocked?

Download wcpuid and it should tell you up to a certain point. Once you hit a certain speed it won't tell you the XX00+ rating.
Or go here ... http://www.ocinside.de/index_e.html this guide will tell you no matter what speed you overclock too

Similar Messages

AMD Athlon XP 2800 (Barton Core) will not post at FSB 166 MHz.

Per top of the board “stickys” I have read a great number of the post on this board and done my homework to provide as much technical info to help you help me. This should explain some of it’s lengthy nature.
Aside from Memory, HDD and Video card every thing else has been unplugged from board and power or stripped out of slots to isolate the problem.
Presently running BIOS: A6712 V. 1B
*As seen on face of MoBo: KT4V MS-6712 Ver:10A
*The Original Box bar code label: KT4V-L (601-6712-050)
K7, KT400. 5.1 chnl. S/W Audio, LAN, D-Bracket 2.
CPU: AMD Athlon AXDL 2800 DLV4D
Q334763K40034 AQYHA 0447APMW
Chip lable
Athlon XP (Barton) Low Power Processor (Model 10) 2083 MHz
OPGA Organic Pin Grid Array 1.50 Volt max. Temp. 85°C
512 KB L2 Cache 333 MHz System bus (166 MHz FSB) x 12.5
Memory: x3- PC 2700 512 mb DDR 333 Super Talent
And shows at post as running 333MHz. MemTested to 1,000% with first 1 stick, then all 3 sticks presently on bios A6712vms.1B0. at fsb 100MHz (aprox. 24hr.) I even installed and ran other AMD utillitys while MemTest was running to “stress” the system memory with zero errors. During this period I checked Windows Task Manager > Performance, CPU usage at 100%, PF usage 1.35gb. No Probs.
Video card: Removed: MSI AGP-8X Ti4200- VTD8X 128 MB DDR 533MHz
Replace with: PCI card (to rule out AGP card prob.) Gilmont, nVidia 64mb
(also tried Matrox AGP 32mb card with no different results then above cards)
Power Supply: L&C Model: LC-B350 ATX = 350 watt
      115/130v      B/4a      60/50 hz
      +3.3v/+5v   1+12v   -12/-5v    +5vsb
      28a   35a    16a    0.8a    0.3a   2a
   +3.3v combined load 200w
Cooler: Slim Volcano 10+, P/N A1671, rated for up to AMD Athlon CP 3400+ & fresh heat sink compound. Freshly re-seated.
All PCI slots empty as I attempt to run bare bones to eliminate problems. (except now running Vido card in 1 slot)
Floppy Drive: ribbon unplugged from board
HDD-0: Seagate 8 gb master, (HDD tested w/no errors)
O/S: Win. XP w/sp2
HDD-1: slave/ unplugged from ribbon and power
Sony CD-Rom: Unplugged from PCI slot and power
SATA/RAID-usb 2.0 card and other HDD’s, removed and not included till Sys. runs at full potential.
Exterior HDD and Burner beyond the scope here and not attached.
O/S Win. XP-sp2
BIOS I have tried: The original; Ver:10A, ran fine on Athlon XP 1600 (1400 MP) 3 years.
•   Then with MSI Live Update 3: Installed v. 1c which couldn’t run FSB 166MHz (MSI:” Fixes system reports incorrect message for AMD 3200+ CPU.
- Supports Sempron L2 512K 3000+ CPU.)
However, v. 1.c did not work and would not post at all with the newly installed Barton AMD-XP 2800. [frankly this attempt was months ago and I do not remember whether it would post at the slower 100 and 133 FSB speeds, and also to muddle my memory further I was upgrading an A7N8X-D with a Barton XP 3000 and having similar problems on the ASUS,,, which is now running fine at full potential. ; - p
•   Then I selected and flashed A6712 V 1.7 122602, boots and runs Win.XP-sp2 at FSB 100MHz & 133MHZ. (MSI:” Supports AMD Barton XP2800+ (FSB333) CPU
-Fixes system sometimes will have IDE CRC error -Fixes D-bracket2+USB keyboard, cannot use keyboard on DOS mode.)” which couldn’t run FSB 166MHz.
I checked with the Tech. at the local shop where I purchased the KT4V MoBo. He suggested I try a different BIOS but he didn’t specify which one. He is a personal friend and admits to some bad luck and dead boards due to flashing bios so reluctant to mess with it.
•   Now running: A6712vms.1B0 – MSI hid this BIOS V. found here:
•   http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=362&kind=1
•    On a different page than the 2 versions mentioned above. http://www.msicomputer.com/support/bios_result.asp
•    No wonder people are frustrated and confused about different MoBo versions there ID #’s and the BIOS versions them selves as seen on this news board. MSI’s fault, no fault of anyone here trying to help.
A6712vms.1B0
Runs fine at FSB 100 (shows as XP 1250+) and FSB 133 (shows as XP 2200+) Booting to Win. XP-sp2 on CMOS, default setup other than minor tweaks to accommodate MSI Ti 4200 AGP 8X 125mb graphics card or Gilmond PCI card. But which couldn’t run FSB 166MHz .
No post at FSB 166 mhz (once, it did flash a post screen stating AMD Athlon XP 2800 for about 2 sec. before going blank) Manual power down. Just now I rebooted with FSB 166, and again saw the AMD Athlon XP 2800 at top of the post screen as I hit pause break,,,, then the machine power crashed to Off. Once it even loaded Win.XP-sp2 but crashed to power off with in 2 min.
I must have booted this beast a dozen times or more after Clear CMOS jumper each time it went to blank screen with mach. still running. Start over; set Default settings and work up with FSB 100, 133, each time to read what POST says and see if it will boot to O/S.
Btw: I have looked for clear evidence through the not so specific descriptions MSI uses to separate these board model #s and may be part of my current problem with correct board ID = correct BIOS ID.
Found here:
[VIA] unofficial FAQ for KT4 series motherboards
https://forum-en.msi.com/index.php?topic=6090.0
Eg: - KT4 Ultra (MS-6590), 6-channel hardware audio codec
• KT4 Ultra (Pure Version)
• KT4 Ultra-B (Bluetooth ready)
• KT4 Ultra-BSR (Bluetooth ready + Serial ATA RAID)
• KT4 Ultra-FISR (Bluetooth ready, Serial ATA RAID, Gigabit LAN, IEEE 1394)
- KT4V (MS-6712), 6-channel software audio codec
• KT4V-L, with onboard 10/100 LAN
- KT4M (MS-6596) micro-ATX board
• KT4M-L, with onboard 10/100 LAN
- KT4A Ultra, (MS-6590) NEW!! based on KT400A chipset
• KT4A Ultra (Standard Version)
• KT4A Ultra-SR (Serial ATA RAID)
• KT4A Ultra-FISR (Serial ATA RAID, Gigabit LAN, IEEE 1394)
And a very similar version of this on Official MSI site. Both seem to try and make a difference between modles with on board Lan, and Blue Tooth ready.
Take a look at my original box sticker:
*As seen on face of MoBo: KT4V MS-6712 Ver:10A
*The Original Box bar code label: KT4V-L (601-6712-050)
K7, KT400. 5.1 chnl. S/W Audio, LAN, D-Bracket 2.
Yup, it says all this on the sticker and the in the manual and verified on the MoBo. So I can only guess at all parts of the puzzle as they gave them to me which lead me to the afore mention BIOS versions I ran, or am running. The sticker points to nearly half of the boards above except for the MS-6712 and the Ver:10a which is what I based my BIOS choices on. If someone knows differently and can lead me to official Nfo with a better answer I’m all ears.
Just saw this: Latest Official BIOS : KT4 MS-6590 (1.4), KT4V MS-6712 (1.8 ) , KT4M MS-6596 (1.1)>>Here: [VIA] unofficial FAQ for KT4 series motherboards
« on: 24 October 02, 05:14:04 » But these links and all but one link in this ‘sticky’ are broken .
So if (1.8) is the Latest Official BIOS for KT4V MS-6712 then what is this at the Official MSI SITE ?
KT4V
BIOS Type
AMI® BIOS     File Sizes
485KB
Version
1.C     Update date
Update Description   -Support Sempron L2 512K 3000+ CPU.
BIOS Type
AMI® BIOS     File Size
Version
1.B     Update date
2004-8-9
Update Description   Support Sempron 2200+/2300+/2400+/2500+/2600+/2800+ CPU.
BIOS Type
AMI® BIOS     File Sizes
485Kb Version
1.A     Update date
2004-5-13
Update Description   - System is unstable to run 3DMark03 with ATI 9600 PRO
- Add "PS/2 Keyboard Detection" Function.
- Support AMD 2400+ CPU.
BIOS Type
AMI® BIOS     File Sizes
514KB
Version
1.9     Update date
2003-7-29
Update Description   -Fixed Adaptec 2100S SCSI card cannot be used
-Modify CPU temperature detection
-Support boot from Onboard LAN
BIOS Type
AMI® BIOS     File Sizes
514KB
Version
1.8     Update date
2003-2-12
Update Description   -Support AMD Barton XP3000+ (FSB333) CPU
-Add "CPU Halt Command Detection" item in the BIOS Setup
Please also keep in mind I’m not trying to scuff anyone’s shoes…I just want to get what’s right for my board so that it and the CPU can live up to their full, "as advertised" potential and run with the other 3 big dogs under my desk.
This seems descriptive enough and rather lengthy. Just doing my homework and reporting my findings so I won’t include actual CMOS settings unless requested. I have notes on all settings I currently use to boot with this problem.
Other Dogs:
ASUS A7N8X-D running Athlon XP 3000 barton core 10 (runs fsb 400..whoknew?), Mem:2.5gb Super Talent
ASUS A7M266-D running Athlon XP 2800 (mp), Mem: 3gb Super Talent
Athlon XP 2800 (mp)
I don’t want to boar you with the details.
Yes, and the above have been upgraded w/new chips GFX cards and BIOS,,, NP.
Cut to sound track: Down on the BIOS again,,, wasn’t that Creedance Clear Water Revival?
Any suggestions or insights are much appreciated.

Welcome, and thank you for a thorough input! Hope I don't miss something you already said!
Quick version: Try setting processor voltage to 1,5 volt.
Long version:
Posting at wrong FSB can be put down to two things:
1 The processor isn't what you thought it is, but I think you eliminated that.
2 The system cannot run the processor at the correct speed. Mainly this has to with overheating, and/or that memory and processor cannot cooperate. This must be it, as you noticed the processor is correctly recognised.
You have little connected right? Then the best thing would be to pull power cable out. Take the motherboard and redo the seating of the processor, this is much better done with motherboard taken out.
At the same time, I suggest you clear CMOS. Should always be done when changing processor, and I've noticed on the Internet there are a few 1,5V XP2800 around.
http://64.233.183.104/search?q=cache:Q4eIa6OhudcJ:forums.amd.com/lofiversion/index.php/t47487.html+AXDL2800DLV4D+problem&hl=sv&gl=se&ct=clnk&cd=1

AMD Athlon XP 2800+ Throughbred running at 1.35ghz ? HELP !?!?!

Hi. I have just bought an AMD Athlon XP 2800+ thoroughbred and popped it into my MSI K7N2 and everything seemed ok until the system info in the control panel says that the CPU is running at 1.35ghz. I am a little confused !?!?! Any help would be most appreciated. As I am a relative newbie when it comes to CPU's I just expected to plug it in and away I go ......

I have a similar problem, my machine runs, but the system says 1.24GHz. Its a 2.6XP AMD processor.
At present the jumpers are set at:
J10 - User Mode (default)
J11 - Closed (133/166MHz) (default)
Ive tried setting the bios manually, but each time I do it locks te machine up, i have to reset the bios in order to get back in. At this time I normally get a series of ligts indicating either a processor problem or once it said a memory problem.
Yet as you can see, Im using the machine OK.
What settings should I alter, atm everything in the bios is on default.

Overclock AMD Athlon Xp 2800+

Hey, how much do you think I could overclock my athlon xp 2800+ with stock cooling, mi psu i've got now, my current RAM, and, case without any fans. And how much with this psu: http://www.thermaltake.com/purepower/W001011.htm this CPU FAN: http://www.thermaltake.com/coolers/venus/rs/a1838.htm and this case: http://www.thermaltake.com/xaserCase/vm3000/vm3000a.htm . OK, thanks for your help :P.

man, with that new stuff you have listed there you could hit speeds over 3200+
my brother has a 2800+ oc'd to 3200+ with that silent boost HSF and he runs at mid 30's idle (room/case temp high 20's). your ram is fine, as it is pc3200 and will run 1:1. so, looks like youre building a nice new setup

MOVED: using kt4avl mobo w/amd athlon xp 2500+ barton....problems oc'ing

This topic has been moved to Overclockers & Modding Corner.
using kt4avl mobo w/amd athlon xp 2500+ barton....problems oc'ing

Sorry if I'm posting in the "wrong" section - maybe you could tell me where I should post instead?
With a 333mhz max fsb board like the kt4avl, what should I be able to change to overclock, then? When I up the cpu freq from the default 166 to even as high as 180, it won't post...let alone 200 like I hear people do. What you're saying about the bios reading what's hard-coded into the chip during post makes me go 'hmmm', because if I set the freq down to the bios default of 100, the post reads the cpu as a 1900+.
I tried poking around on the internet for specs on successive xp chips, like the 2600+ and the 2800+. My chip, being the 2500+ which runs at 1.833ghz, has a multiplier of 11 with a freq of 166. Whereas,I found some doc on the other chips having multipliers of like 12.5 or 13.5, something like that - when I tried manipulating the multiplier higher than the stock 11, it posts, but it didn't change my operating frequency any when I viewed it from within Windows (system properties view in Windows tells you how fast your cpu is operating), but that did increase when I was manipulating the cpu frequency in the bios earlier (it's just that it 'hit the wall' at about 175mhz and wouldn't post with anything above that, even when increasing the cpu voltage to 1.7 or 1.75).
Can someone suggest what they might try, given these symptoms?

Overclock AMD Athlon II X2 250 on MSI 760GM-P21 (FX)

I want to overclock AMD Athlon II X2 250 on motherboard MSI 760GM-P21 (FX), integrated video card from motherboard and MS-TECH VERTIGO 520W 80+ power supply.
But before buy this power supply I had a NoName 400w.
And when I oc on NoName PSU after 3,3 ghz I receive BSOD.
How to oc more than 3,3 ?
Ty.

The CPU itself would work just fine up till the current draw exceeds the limit of CPU VRM (Voltage Regulator Module) and fry it. Even tho it's listed as supported don't use CPU over 95W and even then under heavy loads for longer periods of time a 95W CPU could possibly cause damage also. If using a 95W don't OC it any. The VRM on the 760GM was never intended for 125W CPU.
The only reason the 125W CPU is listed is because competing brands show support for them and MSI made the wrong decision to list them also just for competitive marketing purposes.

K9N Neo-F and AMD Athlon X2 AM2 6000+ (125W)

Hi Everyone!
I want to upgrade my PC, now I have:
MSI K9N Neo-F motherboard
S/N: 601-7260-010K0609058577
MS-7260 ver. 1.0 K9N Neo nForce 550, AMD AM2
CPU: AMD Athlon X2 AM2 3800+
RAM: GoodRam 2x512MB (667) and 2x1GB (667)
GPU: Zotac GF 8800GT
Now I want to buy:
CPU: AMD Athlon X2 AM2 6000+ (125W)
RAM: GeIL 2x2GB (800) Black Dragon II
My question is: can I use this new CPU on old motherboard?
Have anyone similiar configuration?
In this topic: https://forum-en.msi.com/index.php?topic=108896.0 someone has the same motherboard and CPU, but talking abolut PSU...
Waiting for help :-)

Quote from: Arcur on 04-June-08, 03:59:54
I was looking for a 125watt board too and its really hard to find one from MSI that have the things I want, I cant even find a board with Nvidia chipset, amd2+ and support a 125 watt processor (or not tested OK yet) or some boards without a cpu support list yet. So no AM2+ for you if you want a 125watt processor on it and a nvidia chipset. is there any reason why MSI cant fix 125watt support?
If you dont care about a future quadcores upgrade you can buy a old AM2 board, but dont forgot to look at the cpu support list, because the most AM2 boards doesnt support 125watt either. ???
"I was looking for a 125watt board too and its really hard to find one from MSI that have the things I want, I cant even find a board with Nvidia chipset, amd2+ and support a 125 watt processor (or not tested OK yet) or some boards without a cpu support list yet. So no AM2+ for you if you want a 125watt processor on it and a nvidia chipset. is there any reason why MSI cant fix 125watt support? "
That is not true, 125W support usually have high end mainboards.
"I cant even find a board with Nvidia chipset, amd2+ and support a 125 watt processor (or not tested OK yet) or some boards without a cpu support list yet. "
Here are they:
K9N2 SLI Platinum/K9N2 Zilent ==> http://global.msi.com.tw/index.php?func=proddesc&prod_no=1443&maincat_no=1&cat2_no=171
K9N2 Diamond ==> http://global.msi.com.tw/index.php?func=proddesc&prod_no=1438&maincat_no=1&cat2_no=171
AM2+ Nvidia chipset boards, not only support 125W, but support 140W CPU too.

Can you down load itunes to amd athlon(tm) 64 x2 dual core processor 3800

Can you download itunes to a computer with amd athlon(tm) 64 x2 dual core processor 3800+

Can you download itunes to a computer with amd athlon(tm) 64 x2 dual core processor 3800+

AMD Athlon 64 3800+ cpu upgrade to AMD Athlon 64 X2

Hello everyone,
First of all, I have been to cpu-upgrade.com and typed in my current (CPU)--> AMD Athlon 64 3800+ 2.40GHz (motherboard)--> ASUS A8M2N-LA (Naos) GL6.
According to the website, my AM2 Socket (940pin) is capable of upgrading to a Dual Core, Anyone know if that site is accurate or not? Any help would be nice. I need to get away from this single core.
1) Some CPU models require a BIOS upgrade, which a BIOS upgrade for this board is not available.
2) A lot of X2 Dual Cores work either using a 4400+, 4600+, and so on....
I do have a 550watt PSU installed, also I am using MSI Nvidia GeForce GT620 PCI-express 16x graphics, not using onboard.
I have read that some BIOS' upgrades terminate the onboard video, is that true? Basically, whatever I already have installed is current and up to date with all video/sound drivers, etc... If anybody very knowledgable knows for sure if an AMD Athlon 64 X2 will work in my system that would be nice. My specs below......
OS: Windows Vista Home Basic (32bit)
CPU: AMD Athlon 64 3800+ 2.40GHz
RAM: 2GB (GDDR2)
PSU: 550watt (all 20+4 for main cable to motherboard connected using all 24 pins + 4pin connector for CPU? I believe.
Sound: Realtek HD ALC888 High Definition Audio
Video: MSI Nvidia GeForce GT620 (GDDR3 with 2GB Video Memory).
Only thing I am bottle necking on is the CPU, and I would love to upgrade to Dual Core, once again, thank you for the help.

Hello @bigsnake,
I understand you are looking to upgrade your processor on your Compaq Presario Media Center SR2013WM Desktop PC. I am providing you with a link to a CPU-Upgrade thread concerning your very question ASUS A8M2N-LA CPU compatibility list. Now this is the only information I have been able to find concerning a processor upgrade for your Compaq Presario Media Center SR2013WM Desktop PC.
I hope this helps. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

TS1362 I am running windows xp with all the updates. I have an HP Pavilion with an AMD athlon xp-m processor. I have the most RAM I can install on this PC (1 gig). I also have plenty of disc space(over 60 gig). Why can't I play my .MOV files correctly.

I cannot get the .mov files I recorded on my I-phone 4 to play correctly( i.e. no audio, video jerky at best), on my HP Pavilion laptop with an AMD athlon xp-m, OS=XP, 1 gig ram, plenty of hard drive space >50 gig. Just not enough RAM or am I missing something? I have updated all I can(Quicktime, I-tunes etal). Any ideas?

My first thought when reading your post ( video jerky) is that the CPU doesn't have enough horse power? What is the GHz of the AMD athlon? 1.8 GHz would be right on the edge with video. And where the computer will max out at 1 Ghz of RAM indicates the laptop is older and the CPU probably as well. 1 GHz of RAM maybe low on today's computers but would not be an issue if the CPU was perhaps 2.8 GHz. The audio is less demanding by far on CPU's than video, so that could be a codec?

Is an AMD Athlon 64 3200+ compatible with windows 8.1 64bit?

I have an older build with an AMD Athlon 64 3200+ processor. I have been reading about Win 8.1 64 bit compatibility issues regarding certain AMD processors. My question is...
Looking at my system information under processor, it shows "cx16 CMPXCHG16b instruction" in the details. From what I have read, the problem with older AMDs is that they are missing the CMPXCHG16b instruction set. Given the info
above would it be safe to say that my processor will be able to run the 64bit version of Windows 8.1?
Any info on this subject would be greatly appreciated.
-Nick

Hi Nick,
Yes, as you know, to install a 64-bit OS on a 64-bit PC, your processor needs to support CMPXCHG16b, PrefetchW, and LAHF/SAHF.
There are some other requirements for Windows 8.1, please read this guide:
System requirements
http://windows.microsoft.com/en-us/windows-8/system-requirements
So please contact AMD support if this model meet the requirement.
I also would like to suggest you run Windows 8.1 Upgrade Assistant to check if your computer could running Windows 8.1 before you install it.
Upgrade Assistant: FAQ
http://windows.microsoft.com/en-in/windows-8/upgrade-assistant-download-online-faq
Karen Hu
TechNet Community Support

[solved] Cflags for AMD Athlon x4 750K

Hello there!
I'm not sure if I've posted in right place. If not, please forgive me.
Does anyone is familiar with proper cflags for AMD Athlon X4 750K B.E. ?
I've searched around and opinions differ. Some people apply =athlon, some =amdfam10...
I'm not sure which one is correct.
Thanks in advance for any info!
//Edit: seems that amdfam10 is for phenoms..
//Edit2: Maybe I should stick to =native?
Last edited by 0x29a (2014-02-07 17:53:24)

Super cool! Thanks a lot! It'll save me a looot of time

Cpu amd athlon II 450 x3

pls can someone help me
i hawe amd athlon II 450 x3 on motherboard NF520T-c35 and i dont hawe 3-rd core
the procesor is new
the old one vas 2core amd bios 1.0
i instaled bios 1.5 and i stil hawe 2 core on amd x3
also i try 1.7 bios and still nothing
why i dont hawe 3-core
pls help me

Quote from: srwle
omg i cant find how to post screeen shot here
>>Forum features & how to use<<
Quote from: srwle on 17-March-13, 16:36:40
mhtml:file://D:\firefox dawnloads\psr record\Problem_20130317_0932.mht!screenshot_0001.jpeg
thre is my cpu info
i yust bough it and instal in my pc
open thath link with explorer
, sorry but we can't open local files on your hdd. Just upload it to a pic hoster. Refer to the link above it's all described there.

AMD Athlon II X4 645 on Motherboard K9A2 CF

Hello,
AMD Athlon II X4 645 on Motherboard K9A2 CF will not work?

It's not in the CPU support list. If you have it try it else ask MSI. >> Contact MSI <<

K7T266Pro2-A - system unstable wid amd athlon xp 1880+?

I have a K7T266Pro2-A motherboard wid an AMD athlon xp 1800+ processor. My main problem is when I load the optimal bios settings to get the processor at 1800+, my system becomes unstable. It works fine at the default speed of 1153 mhz. Anyone know how to fix this?

Quote
i changed my FSB to 166mhz
You mean fsb133 I think, fsb166 isn't supported by the K7T266Pro2-A.
Btw: No need for apology, better asking here than blowing up your hardware.

Amd Athlon Xp 2800+@2.25ghz

Similar Messages

Maybe you are looking for