AMD ATI RADEON 6770m problem after update YOSEMITE 10.10

Hello, i'm passing thru a very hard problems, I'm using a :
Model Name: MacBook Pro
Model Identifier: MacBookPro8,3
Processor Name: Intel Core i7
Processor Speed: 2.4 GHz
Number of Processors: 1
otal Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 6 MB
Memory: 16 GB
Boot ROM Version: MBP81.0047.B27
SMC Version (system): 1.70f6
AMD Radeon HD 6770M:
Chipset Model: AMD Radeon HD 6770M
Type: GPU
Bus: PCIe
PCIe Lane Width: x8
VRAM (Total): 1024 MB
Vendor: ATI (0x1002)
Device ID: 0x6740
after call many times to apple support made smc reset , PVRam reset, reinstall yosemite i paid for a tech made some BGA on my mac, it works for 1 week now i'm again with the same problem ... so i moved the amd .kext and controller .bundle to /DisableExtensions but remained on the folder ... i connected my canon T2i and when iPhoto starts the amd start work and my machine sttoped .. reboot now when i boot the machine only
amd radeon is working i tried change the card with gfxCardStatus but i can't
and there's no second display connected here...
so what it can be ?
Model Name: M

Remove Login Items to test.
Open System Preferences > Users & Groups then select the Login Items tab. Remove all items. Restart your Mac to test.
And remove all items from: /Library/StartupItems then restart to test.
Not enough free space on the iMac disk can slow startup time.
Click the Apple  top left in your screen. From the drop down menu click About This Mac > More Info > Storage
Make sure there's at least 15% free disk space.
If it's not a login/startup items or disk space issue, check the hard disk using Disk Utility.
Launch Disk Utility located in HD > Applications > Utillities
Select the startup disk on the left then select the First Aid tab.
Click: Verify Disk (not Verify Disk Permissions)
If Disk Utility reports errors, restart your Mac while holding down the Command + R keys.
From there you should be able to access the built in utilities in OS X Recovery to repair the startup disk and restore OS X.

Similar Messages

Problems after updating from Mavericks to Yosemite.

Hello everyone.I have noticed some battery problems after updating from Mavericks to Yosemite like no charging at all (but the orange led was on )and not able to fully charged.I solve them with SMC reset and PRAM reset.Furthermore, battery discharges faster than before and its really annoying.Now I have notice that the upper right corner of my mac is getting hot.I'll appreciate any help
MacBook Pro (Retina, 13-inch, Late 2013

Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

[HOW-TO] Ati Radeon & Kernel 2.6 - Updated

[HOW-TO] Ati Radeon & Kernel 2.6
Updated on new ati-drivers 4.3.0
[CONTENTS]
1.1 Requirements
2.0 Compiling Kernel
2.1 Configuring Bootloader [GRUB]
3.0 Building & Generating modules
3.1 Pacthing modules
3.2 Compiling modules
3.3 Adding modules boot runlevel
4.0 fglrxconfig
4.1 Xorg.conf NEW!!
[1.1] Requirements
(All Intel & AMD users)
1. Ati Radeon 9xxx (Mine 9600 Sapphyre pro)
2. Kernel 2.8.x (Current 2.8.1)
3. wget, rpmunpack, cpio
4. PKGBUILD [FILE]
5. ati-drivers.install [FILE]
6. fglrx-2.6-vmalloc-vmaddr.patch New!!!
Those are code for listed files:
PKGBUILD New!!!
pkgname=ati-drivers
pkgver=3.11.1
pkgrel=1
pkgdesc="Proprietary (binary) drivers for ATI Radeon Cards."
url="www.ati.com/support/driver.html"
depends=('xfree86')
install="$pkgname.install"
source=(http://www2.ati.com/drivers/linux/fglrx-4.3.0-$pkgver.i386.rpm)
#md5sums=('9f7802ee0bbdeb5172673027056e789d')
# build-time deps: rpmunpack, cpio, gzip
build() {
cd $startdir/pkg
rpmunpack < $startdir/src/fglrx-4.3.0-$pkgver.i386.rpm | gzip -d | cpio -idmuv
chmod 755 -R .
mv opt/kde3 opt/kde
mkdir -p opt/gnome/share
mv usr/share/gnome/apps/ opt/gnome/share
rm -rf usr/share/gnome
usr/share/applnklib/modules/fglrx/{fglrx*.o,fglrx_info.txt}
usr/X11R6/bin/LICENSE.{GPL,QPL}
usr/X11R6/bin/*.bz2
ati-drivers.install New!!!
post_install() {
cat << EOF
NOTE
To create an fglrx module for your system, do:
cd /lib/modules/fglrx/build_mod
./make.sh
cd ..
./make_install.sh
Make sure you have your full kernel tree at /usr/src/linux
Then initialize "fglrxconfig" to create an XF86Config
for your graphics card.
EOF
post_upgrade() {
/bin/true
pre_remove() {
/bin/true
op=$1
shift
$op $*
fglrx-2.6-vmalloc-vmaddr.patch New!!!
--- firegl_public.c 2004-03-17 17:00:29.000000000 -0500
+++ /lib/modules/fglrx/build_mod/firegl_public.c 2004-07-18 16:09:46.000000000 -0500
@@ -2010,8 +2010,8 @@
pMmPage = virt_to_page(kaddr);
#endif /* LINUX_VERSION_CODE < 0x020400 */
- atomic_inc(&(pMmPage->count)); /* inc usage count of page */
+// atomic_inc(&(pMmPage->_count)); /* inc usage count of page */
+ get_page(pMmPage);
#if LINUX_VERSION_CODE >= 0x020400
// __KE_DEBUG3("vm-address 0x%08lx => kernel-page-address 0x%pn",
// address, page_address(pMmPage));
[2.0] Compiling kernel
<*> MTRR
e poi
<M> /dev/agpgart (AGP Support)
< > ALI chipset support
< > ATI chipset support
< > AMD Irongate, 761, and 762 chipset support
< > AMD Opteron/Athlon64 on-CPU GART support
< > Intel 440LX/BX/GX, I8xx and E7x05 chipset support
< > Intel i865 chipset support
< > NVIDIA nForce/nForce2 chipset support
< > SiS chipset support
< > Serverworks LE/HE chipset support
<M> VIA chipset support
< > Transmeta Efficeon support
[*] Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)
< > 3dfx Banshee/Voodoo3+
< > 3dlabs GMX 2000
< > ATI Rage 128
< > ATI Radeon
< > Matrox g200/g400
< > SiS video cards
make dep && make clean bzImage modules modules_install
[/code]
when finished,mount boot partition (if not already mounted)
[code]
mount /boot
[/code]
and copy kernel image to the boot directory, so the new kernel loads after computer restart. Pay attention to not overwrite existent kernels images in boot partition. For security issues rename it as ***_new.
[code]
cp arch/i386/boot/bzImage /boot/vmlinuz_new
[/code]
[2.1] Configuring Bootloader [GRUB]
Edit your boot-loader config file.
I currently use grub instead of lilo.
[code]
nano /boot/grub/menu.lst
[/code]
Add a new sub-menu (this is an example) Check on the forum how to set-up a bootloader).
[code]
# (0) Arch Linux
title Arch Linux [/boot/vmlinuz_new]
root (hd0,3)
kernel (hd0,1)/vmlinuz_new root=/dev/discs/disc0/part4 ro
[/code]
REBOOT
[3.0] Building ati-drivers
Make a directory under /var/abs/local called ati
[code]
mkdir /var/abs/loca/ati
[/code]
copy in it the two files PKGBUILD ati-drivers.install
[code]
cp /path/to/file/PKGBUILD /var/abs/local/ati
cp /path/to/file/ati-drivers.install /var/abs/local/ati
[/code]
start building package
[code]
makepkg -c
[/code]
if all goes well, this will be the output
[code]
[root@CippaLippa ati]# makepkg -c
==> Making package: ati-drivers
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
==> .......
==> .......
==> Compressing man pages...
==> Stripping debugging symbols from libraries...
==> Stripping symbols from binaries...
==> Generating .PKGINFO file...
==> Copying install script...
==> Generating .FILELIST file...
==> Compressing package...
==> Cleaning up...
==> Finished making: ati-drivers (Tue Feb 10 15:11:13 CET 2004)
[root@CippaLippa ati]#
[/code]
It downloads necessary files and generates a file called ati-drivers-3.9.x.pkg.tar.gz
Install it using:
[code]
pacman -A ati-drivers-3.x.x.pkg.tar.gz
[/code]
This installation generates a folder in /lib/modules/fglrx
Change directory
[code]
cd /lib/modules/fglrx
[/code]
[3.1] Pacthing modules
To patch modules simply copy the two files .patch listed on top in this directory. Intel users must only install fglrx-2.6-vmalloc-vmaddr.patch, AMD users both.
[code]
cp /path/to/patch/fglrx-2.6-vmalloc-vmaddr.patch /lib/modules/fglrx
[/code]
change directory
[code]
cd build_mod
[/code]
to patch the file firegl_public.c
[code]
patch -b firegl_public.c ../fglrx-2.6-vmalloc-vmaddr.patch
[/code]
It's time to compile the modules
[code]
sh make.sh
[root@CippaLippa build_mod]# sh make.sh
ATI module generator V 2.0
==========================
initializing...
probing for VMA API version...
cleaning...
patching...
make[1]: Leaving directory `/usr/src/linux-2.6.x
build succeeded with return value 0
duplicating results into driver repository...
done.
==============================
You must change your working directory to /lib/modules/fglrx
and then call ./make_install.sh in order to install the built module.
==============================
[/code]
change directory as you see on screen
[code]
cd /lib/modules/fglrx
[/code]
and compile in
[code]
sh make_install.sh
[/code]
if will be no errors in output, module fglrx were perfectly compiled in /lib/modules/2.6.x/kernel/drivers/char/drm/ and named "fglrx.ko"
[3.2] Adding modules boot runlevel
open /etc/rc.conf
[code]
nano /etc/rc.conf
[/code]
go to line MODULES= and add
[code]
agpgart via-agp fglrx rtc <== make sure always in this order
[/code]
(if your motherboard is "VIA" equipped, else check what do you have: the same configured in kernel under /dev/agpgart (AGP Support)
[4.0] fglrxconfig
Ati-drivers comes with a modified xf86config, utility to generate XF86config files.
Run
[code]
fglrxconfig
[/code]
and a welcome screen appear
[code]
==============================================================================
ATI - FIRE GL - BE THE CREATOR
==============================================================================
This program will create the ATI "XF86Config-4" file
- based on your selections - for the below listed boardtypes...
- ATI Radeon 8500 / 9100
- ATI FireGL 8700 / 8800 / E1
- ATI FireGL T2
- ATI Radeon 9000
- ATI Radeon 9200
- ATI Radeon 9500
- ATI Radeon 9600
- ATI Radeon 9700
- ATI Radeon 9800
- ATI FireGL Z1 / X1 / X2
- ATI Mobility M9
- ATI Mobility FireGL 9000
- ATI Mobility M9PLUS
The "XF86Config-4" file usually resides in /etc/X11.
Press [Enter] to continue, press 'q'&[Enter] or [Ctrl]+'c' to abort.
[/code]
follow the on-screen steps leaving default settings. Configure only mouse, keyboard, screen frequencies and resolution. At least when prompt for:
[code]
External AGPGART module:
external agpgart module execute this on the commandline (as root):
/sbin/insmod agpgart
or alternatively configure your system to auto load the module.
Do you want to use the external AGP GART module (y/n)? [y]
[/code]
be sure to answer "YES".
[4.1] Xorg.cong New!!!
Xorg configuration file, resides in /etc/X11.
It is XF86config renamed and Will replace soon it, with the new video system based on Xorg.
This is my xorg.conf file:
[code]
Section "dri"
Mode 0666
EndSection
Section "Module"
Load "dbe" # Double buffer extension
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "type1"
Load "freetype"
Load "glx" # libglx.a
Load "dri" # libdri.a
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
ModulePath "/usr/X11R6/lib/modules"
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
Option "AutoRepeat" "500 30"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "it"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/usbmouse"
EndSection
Section "Monitor"
Identifier "Monitor0"
HorizSync 31-96
VertRefresh 55-160
Option "DPMS"
EndSection
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
EndSection
Section "Device"
Identifier "ATI Graphics Adapter"
Driver "fglrx"
#Option "NoDDC"
Option "no_accel" "no"
Option "no_dri" "no"
Option "DesktopSetup" "0x00000000"
Option "MonitorLayout" "AUTO, AUTO"
Option "IgnoreEDID" "off"
Option "HSync2" "unspecified"
Option "VRefresh2" "unspecified"
Option "ScreenOverlap" "0"
Option "NoTV" "yes"
Option "TVStandard" "NTSC-M"
Option "TVHSizeAdj" "0"
Option "TVVSizeAdj" "0"
Option "TVHPosAdj" "0"
Option "TVVPosAdj" "0"
Option "TVHStartAdj" "0"
Option "TVColorAdj" "0"
Option "GammaCorrectionI" "0x00000000"
Option "GammaCorrectionII" "0x00000000"
Option "Capabilities" "0x00000000"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
Option "CenterMode" "off"
Option "PseudoColorVisuals" "off"
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
Option "UseFastTLS" "0"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "no"
Option "ForceGenericCPU" "no"
BusID "PCI:1:0:0" # vendor=1002, device=4150
Screen 0
EndSection
Section "Screen"
Identifier "Screen0"
Device "ATI Graphics Adapter"
Monitor "Monitor0"
DefaultDepth 24
#Option "backingstore"
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600"
ViewPort 0 0 # initial origin if mode is smaller than desktop
EndSubsection
EndSection
Section "ServerLayout"
Identifier "Server Layout"
Screen "Screen0"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
[/code]
REBOOT
Start in X with kde, gnome or othet window manager.
If X does not start you maybe made something wrong, retry from the beginning. Else if it starts, check if DRI os working
[code]
fgl_glxgears
[/code]
if it is working, a rotating cube will appear in a new windows, and if it is so.....
ENJOY
**SORRY FOR MY ENGLISH **

Using kernel 2.6.2
I'm starting over again but now cannot get the PKGBUILD to complete. I had this problem this morning as well, but after editing the PKGBUILD file did eventually get it to complete. This is the output of makepkg -c using the PKGBUILD as posted:
[root@Arch2 ati]# makepkg -c
==> Making package: ati-drivers (Wed Feb 11 16:11:02 GMT 2004)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
==> Downloading fglrx-glc22-4.3.0-3.2.8.i586.rpm
--16:11:02-- http://www2.ati.com/drivers/linux/fglrx … 8.i586.rpm
=> `fglrx-glc22-4.3.0-3.2.8.i586.rpm'
Resolving www2.ati.com... 62.25.100.58, 62.25.100.32
Connecting to www2.ati.com[62.25.100.58]:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 4,365,039 [audio/x-pn-realaudio-plugin]
100%[====================================>] 4,365,039 55.23K/s ETA 00:00
16:12:27 (50.80 KB/s) - `fglrx-glc22-4.3.0-3.2.8.i586.rpm' saved [4365039/4365039]
==> Validating source files with MD5sums
fglrx-glc22-4.3.0-3.2.8.i586.rpm ... Passed
==> Extracting Sources...
==> Removing existing pkg/ directory...
==> Starting build()...
./lib/modules/fglrx/build_mod/2.6.x/Makefile
./lib/modules/fglrx/build_mod/agp.h
./lib/modules/fglrx/build_mod/agp3.c
./lib/modules/fglrx/build_mod/agp_backend.h
./lib/modules/fglrx/build_mod/agpgart.h
./lib/modules/fglrx/build_mod/agpgart_be.c
./lib/modules/fglrx/build_mod/firegl_public.c
./lib/modules/fglrx/build_mod/firegl_public.h
./lib/modules/fglrx/build_mod/i7505-agp.c
./lib/modules/fglrx/build_mod/libfglrx_ip.a.GCC2
./lib/modules/fglrx/build_mod/libfglrx_ip.a.GCC3
./lib/modules/fglrx/build_mod/make.sh
./lib/modules/fglrx/build_mod/nvidia-agp.c
./lib/modules/fglrx/fglrx.2.4.18-17.7.x.o
./lib/modules/fglrx/fglrx.2.4.18-17.8.0.o
./lib/modules/fglrx/fglrx.2.4.20-6-SMP.o
./lib/modules/fglrx/fglrx.2.4.20-6.o
./lib/modules/fglrx/fglrx.2.4.21-1.1931.2.349.2.2.ent-SMP.o
./lib/modules/fglrx/fglrx.2.4.21-1.1931.2.349.2.2.ent.o
./lib/modules/fglrx/fglrx.2.4.21-1.1931.2.349.2.2.entbigmem-SMP.o
./lib/modules/fglrx/fglrx_info.txt
./lib/modules/fglrx/make_install.sh
./opt/kde3/share/applnk/fireglcontrol_kde3.desktop
./usr/X11R6/bin/LICENSE.GPL
./usr/X11R6/bin/LICENSE.QPL
./usr/X11R6/bin/fgl_glxgears
./usr/X11R6/bin/fglrx_xgamma
./usr/X11R6/bin/fglrxconfig
./usr/X11R6/bin/fglrxinfo
./usr/X11R6/bin/fireglcontrol.qt2.gcc2.96.bz2
./usr/X11R6/bin/fireglcontrol.qt3.gcc3.2.bz2
./usr/X11R6/bin/fireglcontrol.qtstatic.gcc2.96.bz2
./usr/X11R6/include/X11/extensions/fglrx_gamma.h
./usr/X11R6/lib/libGL.so.1.2
./usr/X11R6/lib/libfglrx_gamma.a
./usr/X11R6/lib/libfglrx_gamma.so.1.0
./usr/X11R6/lib/modules/dri/fglrx_dri.so
./usr/X11R6/lib/modules/drivers/fglrx_drv.o
./usr/X11R6/lib/modules/linux/libfglrxdrm.a
./usr/include/GL/glxATI.h
./usr/share/applnk/fireglcontrol.kdelnk
./usr/share/gnome/apps/fireglcontrol.desktop
./usr/share/icons/ati.xpm
./usr/share/pixmaps/ati.xpm
./usr/src/ATI/fglrx_panel_sources.tgz
./usr/src/ATI/fglrx_sample_source.tgz
21763 blocks
/usr/bin/makepkg: line 23: usr/share/applnklib/modules/fglrx/fglrx*.o: No such file or directory
usr/X11R6/bin/LICENSE.GPL: line 2: syntax error near unexpected token `('
usr/X11R6/bin/LICENSE.GPL: line 2: ` The Qt GUI Toolkit is Copyright (C) 1994-2000 Trolltech AS.'
/usr/bin/makepkg: line 25: usr/X11R6/bin/fireglcontrol.qt2.gcc2.96.bz2: cannot execute binary file
==> ERROR: Build Failed. Aborting...
[root@Arch2 ati]#
I seem to be going backwards!

AMD ATI Radeon HD 6370M in windows 8.1 64-bit

i have a problem with my driver AMD ATI Radeon in Windows 8.1 64-bit. I can't run a program use high performance graphic. that program immidiately close. But when i run with power saving it can work. Can help me???
I need play game using high performance for better gaming. If i play in power saving i can't hold my anger to play games

Hi jokerass,
I am sorry, but at this time HP does not have Windows 8.1 drivers for this computer. Here is the HP alerts and updates page that you can subscribe to, to get the latest updates.
I hope this helps.
Thank you and have a great day!
I worked on behalf of HP.

Why my Mac Pro 2009 became too slow after updated Yosemite?

Why my Mac Pro 2009 became too slow after updated Yosemite?

When the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

White screen problem after updating to 1.1 firmware

My 2G iPod Nano worked fine with 1.0.1 and 1.0.2 firmware but after updating to 1.1 I get white screen everytime I turn it on after longer period of time. Turning the iPod off and then right back on makes it work again. I have done restore 3 times without effect. I even removed the firmware files so that iTunes downloads them again when doing the restore but that didn't work either.
Should I return it or wait for new firmware? Has anyone else had this problem after updating to 1.1?

Disconnect iPod and close iTunes.
Firmware files are in "Documents and Settings\username\Application Data\Apple Computer\iTunes\iPod Software Updates" folder.
You should still have the 1.0.2 files named "iPod_19.1.0.2.ipsw" and "iPod_19.1.0.2.ipsw.signature" in there if have you upgraded from 1.0.1 version.
Remove 1.1 files from the folder so that only those to files are in there.
Disconnect from network (I switched off my wlan) so that iTunes can't download the new version. Connect your iPod and do Restore, iTunes will now use the old firmware files because it can't connect to the internet.
Fujitsu Siemens Amilo M3438G Windows XP

Photoshop CS2 problems after updating to 10.4.5.?

Anybody notice Photoshop CS problems after updating to 10.4.5.?

Hello I had the same problem
I found the following information that helped me.....
Program errors occur when software conflicts arise due to an updated operating system. You can resolve these errors when you also update the driver software that causes the conflict or when you update the operating system. Program errors can also occur because of a damaged Photoshop preference file, or if there is a problem with a phone or internet connection. The Apple Disk Utility fixes file system errors that can also cause program errors.
Error "Could not complete your request..." or "Could not create a new document..." (Photoshop CS2 on Mac OS X v10.4)
Issue
Adobe Photoshop CS2 returns one of the following error messages:
"Could not complete your request because of a program error" when you try to open a file.
"Could not create a new document because of a program error" when you try to create a new file.
Solution 1:
Install the most recent update to Mac OS.
Solution 2:
Re-create your preferences files.
1. Hold CommandOptionShift when you start Photoshop.
2. Click Yes to the message, "Delete the Adobe Photoshop Settings file?"
Solution 3:
Disconnect your Internet connection.
To disconnect your Internet connection, do one of the following:
If you are connected to the Internet via a telephone modem, then disconnect from the modem.
If you are connected to the Internet via cable modem or DSL, then disconnect the ethernet cable from your computer.
Solution 4:
Use a disk repair utility.
Restart your Mac in Single User mode and run fsck -fy . For more information about the fsck command, please visit the Apple website at http:/docs.info.apple.comarticle.html?artnum=106214 .
Solution 5:
Ensure that all your drivers are compatible with Mac OS X v10.4.
Determine if your printer and video card (and any other peripherals you might have) are compatible with Mac OS X v10.4, and visit the manufacturers' websites to update the drivers.
Solution 6:
Re-create your printers in Mac OS X.
To re-create your printers, first delete them and then add them again.
To delete your printers:
1. Open System Preferences from the Apple menu.
2. Select Print & Fax, and click Printing.
3. Select each printer in the list and click the delete key (the minus key).
For instructions on how to add your printers again, see "Setting up to print to a printer" in Mac Help or search Help using the phrase "add a printer."
The one that fixed it for me was solution 6 -- re-creating my printers
I don't know why but it could be worth a try
Good luck
ADAM
17" Powerbook G3 iMac Mac OS X (10.4.3)
17" Powerbook G3 iMac Mac OS X (10.4.3)
17" Powerbook + G3 iMac Mac OS X (10.4.5)

My itunes opens after 2-3 hrs after doubleclicking it to open;it happened once or twice with itunes 11.x , but its a constant problem after updating itunes to 12.x ....my operating system win7;processor i5 intel haswell and 4gb ram...i hav no issue

My itunes opens 2-3 hrs after doubleclicking it to open;it happened once or twice with itunes 11.x , but its a constant problem after updating itunes to the latest 12.0.1....my operating system windows7;processor i5 intel haswell and 4gb ram...i have no issue with opening other big programs....i tried uninstalling completely the itunes and reinstalling it as i thought at first it is not opening (because it takes really long time) and i followed the following support pages
1)iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
2)iTunes for Windows doesn't open after upgrading in Windows Vista, Windows 7, or Windows 8
but my problem doesnot get solved even after trying all the methods in the above pages...
now i realized,it opens after 2-3 hrs and at will...after opening it keeps hanging.finally it doesnot again open immediately after closing...kindly help me out as soon as possible

My itunes opens 2-3 hrs after doubleclicking it to open;it happened once or twice with itunes 11.x , but its a constant problem after updating itunes to the latest 12.0.1....my operating system windows7;processor i5 intel haswell and 4gb ram...i have no issue with opening other big programs....i tried uninstalling completely the itunes and reinstalling it as i thought at first it is not opening (because it takes really long time) and i followed the following support pages
1)iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
2)iTunes for Windows doesn't open after upgrading in Windows Vista, Windows 7, or Windows 8
but my problem doesnot get solved even after trying all the methods in the above pages...
now i realized,it opens after 2-3 hrs and at will...after opening it keeps hanging.finally it doesnot again open immediately after closing...kindly help me out as soon as possible

Iphone 5 back camera problem after update to IOS 8. Focus doesn't work on back camera!

My device is Iphone 5 64gb IOS 8.
I have problem after update to IOS 8. When i run camera.. I hear some scratch inside my phone. And focus of back camera doesn't work.
1. How can i fix it?
2. Or how to rollback to IOS 7+ ?
3. Should i come to app store with this problem?

I'm having this same problem too. Worked fine prior to iOS update. I contacted Verizon this morning who advised that this is a known issue. They suggested I backup my device, and perform a factory data reset. When prompted to update to iOS 8 again, re-installation has been known to resolve the issue. With all the problems with iOS 8, camera, and overall device slowing, I might just wait for a follow on SW turn.

What cause searching network problem after updating iphone 6 from iOS 8.1.2 TO iOS 8.1.3?

what cause searching network problem after updating iphone 6 from iOS 8.1.2 TO iOS 8.1.3?

SSince Apple does not support downgrading the iOS I suggest you start a new question that gives a good title to a specific problem. Then in the body of the thread describe the problem in detail, tell us what steps you have tried so far to correct the problem, what happened, and what error messages you received.

HT4623 I AM FACING PROBLEM AFTER UPDATING (7.0.4) MY PHONE MODEL 5C,AFTER THIS UPDATE SOME TIMES I CANT MAKE CALLS & SOME TIMES WHEN ANY BODY ELSE WANTS TO CALL ME BACK THE MESSAGE COME THAT THE USER IS NOT REACHABLE.PLS HELP

I AM FACING PROBLEM AFTER UPDATING (7.0.4) MY PHONE MODEL 5C,AFTER THIS UPDATE SOME TIMES I CANT MAKE CALLS & SOME TIMES WHEN ANY BODY ELSE WANTS TO CALL ME BACK THE MESSAGE COME THAT THE USER IS NOT REACHABLE.PLS HELP

I am facing the same issue! I bought 5c few days back
and everything was fine till I updated the software 7.0.4!
Whenever am connected to wifi am unable to make a call and if someone tries
Calling me they get the message that my number is not
Reachable! When I go back to 3G the calls work perfectly!!
Please help me out since I use wifi more than my network.
Appreciate any advise on this

Flash player problem after updating to belle on my...

flash player problem after updating to belle on my nokia c7.when I try to play .flv videos screen goes blank as show in image,previously these videos runs fine on symbian anna plz help plz help or tell me the way to downgrade to anna
Attachments:
scr000002.jpg ‏10 KB

1) product code 059B7W0
2) software version 111.030.0609
3) it is actually stored .flv files on my phone workes fine on symbian anna
Attachments:
Scr000003.jpg ‏17 KB
Scr000004.jpg ‏15 KB

Anyone has any problem after updating to iSO 4.3.1 ?

anyone has any problem after updating to iSO 4.3.1 ?
I would like to know before updating mine.

My 3G kept freezing after iSO 4.2.. and after reading the forums I updated both my Itunes and software to iOS 4.3.1, now I've lost my notes, contacts, calender entries and so far in the last ten minutes it's turned off and restarted itself and sync'd continually about 5 times.
So basically I'm still where I was before only more cranky. In addition, I live in Australia and there are no Genius places here, there is no support from Apple unless you pay for it even by an email, you basically end up fending for yourself under a supposed warranty that isn't worth the paper its printed on.
It you haven't already guessed, I'm more than a little ****** off.
If I'd known how much trouble this was going to be, I don't think I would have spent the $400 odd dollars to buy it.
If its not right by the weekend I'm taking it back to the shop I bought it.

Microsoft Office 2011 no longer opens because "there is a problem" after updating mountain lion when the app store said there was an update available this morning. Reinstalling did not work. What's the problem?

Microsoft Office 2011 no longer opens because "there is a problem" after updating mountain lion when the app store said there was an update available this morning. Reinstalling did not work. What's the problem?

Has your problem been solved by the updates??
Have a similar problem. This MacBook opened all MS Office programs in Dec2012 but no longer does in Feb2013. Went to Microsoft/mac/downloads but none of the three updates would run citing a problem "version of software needed to run this update was not found on this volume".
MacBook: 7.1, Intel Core 2 Duo, 2.4 GHz
Microsoft Office 2011: version 14.2.3
Mountain Lion: 10.8.2 (12C60)

Great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my

great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my beloved Photoshop!

The Yosemite upgrade very often damages existing Photoshop installations. Thank Apple for that.
You need to uninstall and re-install Photoshop, then apply all the Photoshop upgrades from scratch.
But first, give us details about your setup:
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

AMD ATI RADEON 6770m problem after update YOSEMITE 10.10

Similar Messages

Maybe you are looking for