AMD based Windows systems

The "Windows Offline Download and Installation Instructions for Java Runtime Environment" has the following : -
"Note: For AMD based Windows systems, the installation file is
jre-1_5_0_11-windows-amd64.exe"
Does this apply only to 64 bit systems?
I have an older system with an ATHLON XP 2200 PLUS Socket A (1800mhz) CPU running Windows XP.
I am having trouble running some JAVA applets with Firefox and want to make sure I have the correct version of JAVA installed
Thanks
Tarras

You should just download the "normal" download. The AMD64 one is just for people running a 64bit system with a 64 bit Windows OS. That's a very limited number and if you're in there you definitely know it.
So just grab the "normal" download (I can't remember but it will be marked with one of "x86", "i586" or just "intel").

Similar Messages

Homesite will not run on my AMD based systems. Period.

I recently upgraded my PC to a dual-core Athlon X2 4400+ and
I cannot get Homesite 5 and 5.5 to start without crashing.
The error shown is: "Exception EOLeSysError in module
HomeSite5.exe at 0008D7A5. Class not registered."
I'm not running any software anti-virus or spyware
protection, that is all handled through hardware on seperate boxes.
Both versions run fine on my Dell XPS Gen 2 Intel-based laptop, as
well as my other Intel-based workstations. Unfortunately It just
crashes on startup on my new AMD dual core system. I've spent hours
researching and trying to see if I can find an answer to this but
I'm at a dead-end. It seems tech support doesnt allow for trial
assistance nor do they have anything in their knowledge base about
this. If anyone could help I'd greatly appreciate it. Here is my
system info:
OS: WindowsXP SP2
Motherboard: ASUS A8N-Deluxe SLI
CPU: AMD X2 4400+
RAM: 1 gig DDR400 Corsair XMS512-3200c
Video: Asus Extreme n7800GT Dual (SLI)
Volume1: 2x WD SE16 WD3200KS (640gig RAID0 SATA2)
Volume2: 2x Seagate ST3160812AS 7200.9 (320gig RAID0 SATA1)
DVD1: NEC ND-3520A
DVD2: Pioneer DVR-105 (USB)
PSU: Silverstone SST-ST50EF 500w

I had a friend try it on his regular single-core AMD64-based
system I think it was a 4000+, and it won't work there either. I
dunno what the deal is but this is very strange. It's uncommon to
see a regular 32bit Windows piece of software simply not run
because of the underlying system hardware makeup.
He also received the same error: "Exception EOLeSysError in
module HomeSite5.exe at 0008D7A5. Class not registered."
I also tried using task manager to set affinity to only
single core upon HomeSite5.exe instance and that didnt seem to
work. From the error, it appears something during the install
shield installation process is not registering, IE, a class or
module.

Can a 128 ssd storage still effectively work if I install windows 8.1 plus msoffice and a window-based proposal system? I plan to buy a macbook air entry level with 1.7 gh i5 processor.

Can a 128 ssd storage still effectively work if I install windows 8.1 plus msoffice and a window-based proposal system? I plan to buy a macbook air entry level with 1.7 gh i5 processor.

If you are going to use Mac OS X and its associated applications, and a BootCamp partition with Windows 8, and MS Office and all of the work created there, you will more than likely run out of space on a 128 GB SSD pretty quickly...especially if you put any music, photos or videos on it. Those things take a lot of space so you will have to be very, very careful about what you want to put on a 128 GB storage space. You would be better off going for 512 GB with what you plan on doing with it.

Will Photoshop CS5 run on a n AMD-based laptop?

I have an Intel based desktop PC and want to buy an AMD based laptop.
Will the CS5 photoshop program I have run on both types of processors?
This may be a stupid question to some, but I would like to be sure before I buy.
Thanks, Fred

It's not a stupid question, but lucky for you those times like back in the 1990s where AMD processors were not fully compatible are long past. As long as you have your system running and installed all AMD specific stuff like motherboard drivers and Windows updates, I would not expect issues. I'd be more concerned about compatibility if the new laptop runs Win 8 instead of Win 7... There may be minor issues to overcome.
Mylenium

Trying to view a linux based dvr system on my mac

Im trying to remote view a linux based dvr system on my mac, I can log into the system, and use the controls, however I cannot view the video on any of the cameras, in windows it requires an active x control installed anyone know what the mac equivalent is?
Thanks

...it requires an active x control installed...
Simple answer: no. ActiveX plug-ins are usually Internet Explorer only. Thus you would not be able to view this on OSX. You could install Windows on your Mac using Boot Camp or a virtual machine, but that's still viewing using Windows.

[SOLVED] Gnome 3.8 apps crash with X Window System Error

So far this applications are affected:
- gnome-terminal (when clicking on menu)
- gnome-control-center (when choosing Users or Date & Time and some other tiles, choosing account in GOA)
- epiphany (when clicking on new tab button)
They crash with following error in console:
(gnome-control-center:12717): Gdk-ERROR **: The program 'gnome-control-center' received an X Window System error.
This probably reflects a bug in the program.
The error was 'BadImplementation (server does not implement operation)'.
(Details: serial 3583 error_code 17 request_code 148 minor_code 46)
(Note to programmers: normally, X errors are reported asynchronously;
that is, you will receive the error a while after causing it.
To debug your program, run it with the GDK_SYNCHRONIZE environment
variable to change this behavior. You can then get a meaningful
backtrace from your debugger if you break on the gdk_x_error() function.)
dmesg show only this line:
[14505.289265] traps: gnome-control-c[12717] trap int3 ip:7fc494139ead sp:7fff3986e5e0 error:0
Running with gdb:
Program received signal SIGTRAP, Trace/breakpoint trap.
0x00007ffff13caead in g_logv () from /usr/lib/libglib-2.0.so.0
(gdb) backtrace
#0 0x00007ffff13caead in g_logv () from /usr/lib/libglib-2.0.so.0
#1 0x00007ffff13cb092 in g_log () from /usr/lib/libglib-2.0.so.0
#2 0x00007ffff2825e60 in ?? () from /usr/lib/libgdk-3.so.0
#3 0x00007ffff2830801 in ?? () from /usr/lib/libgdk-3.so.0
#4 0x00007ffff5332976 in _XError () from /usr/lib/libX11.so.6
#5 0x00007ffff532fbc1 in ?? () from /usr/lib/libX11.so.6
#6 0x00007ffff532fc05 in ?? () from /usr/lib/libX11.so.6
#7 0x00007ffff5330495 in _XEventsQueued () from /usr/lib/libX11.so.6
#8 0x00007ffff5332f28 in _XData32 () from /usr/lib/libX11.so.6
#9 0x00007ffff530d46e in XChangeProperty () from /usr/lib/libX11.so.6
#10 0x00007ffff283bcfb in ?? () from /usr/lib/libgdk-3.so.0
#11 0x00007ffff2d4609c in ?? () from /usr/lib/libgtk-3.so.0
#12 0x00007ffff2d4a8ca in gtk_window_set_icon_name () from /usr/lib/libgtk-3.so.0
#13 0x000000000044ba23 in ?? ()
#14 0x00007fffe3358eb8 in ffi_call_unix64 () from /usr/lib/libffi.so.6
#15 0x00007fffe3358820 in ffi_call () from /usr/lib/libffi.so.6
#16 0x00007ffff168ac98 in g_cclosure_marshal_generic () from /usr/lib/libgobject-2.0.so.0
#17 0x00007ffff168a458 in g_closure_invoke () from /usr/lib/libgobject-2.0.so.0
#18 0x00007ffff169b40d in ?? () from /usr/lib/libgobject-2.0.so.0
#19 0x00007ffff16a3219 in g_signal_emit_valist () from /usr/lib/libgobject-2.0.so.0
#20 0x00007ffff16a3462 in g_signal_emit () from /usr/lib/libgobject-2.0.so.0
#21 0x000000000044d3bc in ?? ()
#22 0x00007ffff168d2b0 in g_cclosure_marshal_VOID__BOXEDv () from /usr/lib/libgobject-2.0.so.0
#23 0x00007ffff168a687 in ?? () from /usr/lib/libgobject-2.0.so.0
#24 0x00007ffff16a2778 in g_signal_emit_valist () from /usr/lib/libgobject-2.0.so.0
#25 0x00007ffff16a3462 in g_signal_emit () from /usr/lib/libgobject-2.0.so.0
#26 0x00007ffff2bf293c in ?? () from /usr/lib/libgtk-3.so.0
My graphic card (iI guess this has something to do with xorg):
AMD Mobility Radeon HD 4550 (using catalyst legacy driver 13.1 with Xorg 1.12)
Last edited by szorti (2013-04-24 08:40:26)

I did a little test:
- upgraded to xorg 1.14
- switched from catalyst to xf86-video-ati drive
Most of the errors dissappeared (GOA still crashes).
But now i can only see message tray using keyboard shortcut (super + m). I read that I need to move my mouse fast to the botton edge of my screen - does not work - instead it show up randomly when i moved mouse near the bottom edge.
I don't want to use the open source drivers (slow and laggy with multi monitor setup I'm using). I hope gnome devs will fix this bugs soon.
SOLUTION (to still use catalyst):
I found out that this is an Xorg 1.12 bug.
Bug: http://lists.debian.org/debian-x/2012/12/msg00133.html
To solve this use patch from this bugreport to compile xorg 1.12
I used this aur packages:
1. https://aur.archlinux.org/packages/xf86 … evdev1.12/
2. https://aur.archlinux.org/packages/xorg-server1.12/ - I have edited PKGBUILD to include patch from bug report above
PKGBUILD and patch:
https://gist.github.com/winglot/5450630
Last edited by szorti (2013-04-24 08:40:10)

Windows System Image Manager Error?

Hi Everyone,
I am having an issue trying to create an answer file through the WSIM. I locate the .wim I need and attempt to create the catalog file it needs first to do the task. However when I do attempt to create this catalog file I get the following error message:
There was an error generating a catalog file for the image ********* in Windows image file G:\RemoteInstall\Images\*******\*******.wim
Keep in mind the *** are just substitutes for the actual names.
If I attempt to just create a new answer file I am prompted with the message box "Editing an answer file without opening a Windows Image will result in limited functionality. Do you want to open a Windows image file now?
I choose yes then open the image and am informed -
"The catalog file for ******** cannot be opened for the following reason: Cannot fine the catalog file associated with the Window image ****. You must have a valid catalog file to continue. Do you want to create a catalog file?"
I click yes and then I get the same message as list on top. I am an admin on this box. Any thoughts or suggestions?
Thanks in advance for your input.

Hi,
First I would like to confirm if you are using the latest version of WAIK –WAIK 1.1. If not, I suggest installing WAIK 1.1 from the following site:
Automated Installation Kit (AIK) for Windows Vista SP1 and Windows Server 2008
http://www.microsoft.com/downloads/details.aspx?FamilyID=94bb6e34-d890-4932-81a5-5b50c657de08&DisplayLang=en
In addition, please make sure you are generating a catalog file for a install.wim file. You cannot generate a catalog file for a boot.wim file.
Because of the changes in the servicing stack in Windows Vista with Service Pack 1 (SP1) and Windows Server 2008, Windows System Image Manager (Windows SIM) cannot create catalog files for some Windows images of different architecture types. The following list describes the Image Manager architecture types and catalogs that can be created for each one.
x86 Windows SIM:
Can create catalogs for x86, x64, and Itanium-based Windows images.
x64 Windows SIM:
Can create catalogs only for x64 Windows images.
Itanium-based Windows SIM:
Can create catalogs only for Itanium-based Windows images.
Please confirm if what version of Windows SIM you are using. I recommend installing x86 Windows SIM.
For more information, please refer to the following thread:
Parameter count mismatch - Windows SIM failed
http://forums.microsoft.com/TechNet/ShowPost.aspx?PostID=3066853&SiteID=17
Hope it helps.
Tim Quan - MSFT

Having issues viewing PDF on web based acct system.

Hello-
I have Adobe Acrobat Professional on my computer and everytime I try to view a PDF on our web based accounting system, it pops open in a separate window. Can you please help?

Hi Mike
First thing you want to do is uninstall CRVS SP 9 and install CRVS SP 10. SP 10 is the first SP to support VS 2013.
Once that is done, let us know if that helped any.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

[SOLVED] Wince Exception 'Data Abort' (0x4) for gwes.dll with ROM based file system??

Hello friends,
Previously, I was using RAM and ROM based file system and my device was booting correctly. Now, I made only one change related to ROM based file system. When I selected this ROM based file system and try to boot the device.... I got the exception and the
logs are ----
3321 PID:400002 TID:410002 SetOpp: choosing AM335X_REV_ES2_1
3321 PID:400002 TID:410002 SetOpp to 3
3331 PID:400002 TID:590002 OALIoCtlHalInitRTC: Initializing RTC
3331 PID:400002 TID:590002 RTC_SetTime() = 2006.01.01 12:00:00.000
3480 PID:400002 TID:930006 ECC TYPE is BCH 8 bit
3481 PID:400002 TID:930006 8Bit NAND device
4835 PID:400002 TID:930006 CM3: input file [\windows\firmware.bin] is 9932 bytes long
4837 PID:400002 TID:930006 CM3: firmware file read ok!
5037 PID:400002 TID:930006 SDHC: CPU revision 0xffffffff
5181 PID:400002 TID:930006 UCD_INIT: g_Dc.pUsb0Regs->MODE_R = 0x80
5185 PID:400002 TID:930006 CAM3xxOTG::Init DEVCTL 80
5391 PID:400002 TID:930006 UsbPowerModule: 2 DEVCTL = 0x00000081
5664 PID:400002 TID:2df001e Exception 'Data Abort' (0x4): Thread-Id=02df001e(pth=9e451cc8), Proc-Id=00400002(pprc=8219f5e0) 'NK.EXE', VM-active=04510006(pprc=9e4658c0) 'GweUser.exe'
5664 PID:400002 TID:2df001e PC=efd918b8(gwes.dll+0x000118b8) RA=efd918b8(gwes.dll+0x000118b8) SP=ab5ff960, BVA=00000024
1529482 PID:400002 TID:2df001e Exception 'Data Abort' (0x4): Thread-Id=02df001e(pth=9e451cc8), Proc-Id=00400002(pprc=8219f5e0) 'NK.EXE', VM-active=04510006(pprc=9e4658c0) 'GweUser.exe'
1529483 PID:400002 TID:2df001e PC=efd918b8(gwes.dll+0x000118b8) RA=efd918b8(gwes.dll+0x000118b8) SP=ab5ff960, BVA=00000024
PB Debugger The Kernel Debugger has been disconnected successfully.
After giving calibration inputs, I go the above exception and the LCD screen becomes white only... But i only changed the file system from RAM & ROM based file system to ROM based file system....
As, I am trying to find the solution but up to now I am unable to find the solution. I request to provide the appropriate inputs????

Hello Friends,
After using the filter as an environment variable in the .bat file still the issue is not solved.. I can only see the Windows Embedded Compact 7 logo without any icon and toolbar??????
My platform .reg files entries are as -
;; Load Device Manager to start storage driver
#if (defined SYSGEN_FSROMONLY)
[HKEY_LOCAL_MACHINE\init\BootVars]
"Start DevMgr"=dword:1
;; Block driver settings to load at boot phase
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\]
"Profile"="FlashDisk"
"Flags"=dword:1000
;; How to use storage space
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\FlashDisk]
"AutoMount"=dword:1
"AutoPart"=dword:1
"AutoFormat"=dword:1
"PartitionDriver"="mspart.dll"
"MountAsBootable"=dword:1
"Name"="NANDFLASH"
"Folder"="NANDFLASH"
"DefaultFileSystem"="FATFS"
;; Making storage device as a root
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\FlashDisk\FATFS]
"MountAsRoot"=dword:1
"MountAsBootable"=dword:1
"MountPermanent"=dword:1
"AutoPart"=dword:1
"AutoFormat"=dword:1
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\FlashDisk\FATFS\Filters\fsreplxfilt]
"dll"="fsreplxfilt.dll"
"order"=dword:1 ; must be loaded before other filters
#endif
;===============================================================================
and .bat file entries are as -
set SYSGEN_FSREPLXFILT=1
set PRJ_ENABLE_FSEXTREPL=1
set PRJ_ENABLE_FSMOUNTASROOT=1
Where I am missing some thing please tell me???????

InDesign crashes every time you double click to open an .indd file on Windows system

InDesign crashes every single time you double click to open an InDesign file and has done so since replacement of the original version of InDesign introduced in the Creative Cloud launch. Does anyone else have this problem? I'd say it was unique to my system if I hadn't experienced the issue repeatedly on several different systems now. You have to relaunch InDesign which then opens the file from recovery, so it saw the file you tried to launch in the first place. This leads me to believe the problem lies with the file association registry of InDesign inside Windows systems. I find it unbelievable that this problem still exists and remains unreported and that a solution hasn't been implemented by Adobe to rectify the issue.
The double click is a fundamental tenant of opening files on a Windows system in the same way a single click is on a Mac. Does InDesign crash ever time a Mac user clicks to open their files, I think not.
Anyone got any ideas other than the obvious which is Adobe actually got their figure out and fixed it.
Cheers,
Pat Doyle

Hi Michael,
I'll give it a go. Don't really like messing with the registry on Windows boxes. Yes you can do it, but it can end up being a case of the operation was a success, but the patient died.
Just was rather hoping someone else had already experienced this problem and posted the registry tweak. Didn't want spend hours reinventing the wheel. Not because I'm lazy, but I have so many demands on my time that resolving a minor issue that effects me only seems like it should be pretty low priority.
The system I'm using is brand new, but the problem seems to have followed me regardless which may indicate that it is seated in my synchronization information somehow. Really don't know how that could happen as I'm not an Adobe engineer or have the remotest idea where to even start looking. So I think I'll mark your suggestion as the "Answer" and just learn to live with it.
Windows eh! Can't live with - can't live without it. I'm sure Mac can be just as temperamental. Just have to chalk this one up as being just another ghost in the machine.
Thanks for all the advice you have kindly offered, much appreciated.
Cheers,
Pat Doyle

NO java control panel in windows system control window

Hello together,
there seems to be a bug/feature (?) not allowing me to use the plugin functionality of my J2EEsdk-1_4
Situation:
Before i installed the J2EE i had an already installed java plug-in 1_4_2 working fine on
my Laptop giving my ms explorer 6.0 the Java VM needed. To avoid conflicts, i deinstalled
this plug-in, before i installed the J2EE 1_4_2. The result was disapointing.
There was NO java control panel in the windows2000 system control window after installing J2EE.
There was no corresponding registration key in the registry anymore.
Additionally there was no java related entrance to be seen anymore in the advanced internet and
security options of my ms explorer 6.0.
i have have found several trouble reports mentioned similar problems during the last months but unluckily
no solution working for me.
i did several tests with different java packages i downloaded today to get the actual versions
First:
i deinstalled the J2EE (not to get version conflicts) and installed the Java Plug-in 1.4.2 again.
This was proposed from ms explorer, when i tried to open an internet page with javaplugins included.
This plugin worked fine again. I could see and use the java panel and it enabled
my explorer to use the java plugin.
Second:
i deinstalled the Java Plugin and installed the J2sdk_1_4_2 instead.
The java plugin which is part of this package also worked fine.
Third:
i deinstalled the J2sdk_1_4_2 and installed the J2EEsdk-1_4-windows.exe.
the same misbehaviour as mentioned before. No java panel icon can be seen
in the windows system control, now registration......
as a workaround i have installed now both, the J2eesdk (i want to learn about)
and some additonal 100 MB java plug-in to enable my MS explorer to display
java applets again.
This is working fine again, but i really would prefer to have no need for two JREs.
By the way:
When i first opened the java control panel of the Plug-in and deactivated the update
mechanism , this plugin got really angry immedialtely afterwards. As a result my
laptop rebooted without coming up again. i had to initiate another hard reboot to get
windows back
i really would like to know , whats wrong me or the J2ee and i apriciate
any hint.
Best regards: yours aspirant

One thing you could do if you by all means want to have only one single copy of 1.4.2 on your system is to install standalone J2SE 1.4.2 (this will accomodate your Java console and browser plugin requirements) and then install Application Server only distribution (on the download page this is referred to as "Sun Java System Application Server Platform Edition 8") and sample applications set ("J2EE 1.4 SDK Samples "). In this way you get full content you would get in J2EE 1.4 SDK and all the benefits of standalone J2SE 1.4.2 installation.
This is obviously more convoluted at installation time since there are 3 separate things to install, but it would seem to fit your requirements.
Hope this helps...

Trying to Create a Catalog file using WSIM (Windows System Image Manager)

I have been looking online for a solution to htis problem for days and come up with nothing so any help would be amazingly helpful.
I have created a Windows 8.1 image which I would like to role out to all users within my company but when trying to create a catalog file I am getting an erorr message saying "Windows SIM was unable to generate a catalog." It says "Mounting
Windows Image file......This might take a few minutes" and then fails after 6-7mins.
When opening the log file I get this:
10:00 : Cannot obtain read/write access for F:\sources\install.wim.
In order to generate a catalog file, you must have read/write access to the Windows image file and its containing folder.
10:13 :
10:13 : Windows SIM was unable to generate a catalog. For troubleshooting assistance, see the topic: 'Windows System Image Manager Technical Reference' in the Windows OPK or Windows AIK User's Guide.
10:13 :
10:13 : System.InvalidOperationException: The operation failed to complete. ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.ArgumentNullException: String reference not set to
an instance of a String.
Parameter name: source
   at System.Globalization.CompareInfo.IsPrefix(String source, String prefix, CompareOptions options)
   at ?A0xfe36268f.ConvertToNtPath(String path)
   at Microsoft.ComponentStudio.ComponentPlatformInterface.CbsSessionAdaptor..ctor(String bootDrive, String imageWinDir, String servicingPath)
   at Microsoft.ComponentStudio.ComponentPlatformInterface.OfflineImageImpl.InitializePackages()
   at Microsoft.ComponentStudio.ComponentPlatformInterface.OfflineImageImpl..ctor(OfflineImageInfo imageInfo)
   --- End of inner exception stack trace ---
   at System.RuntimeMethodHandle._InvokeConstructor(Object[] args, SignatureStruct& signature, IntPtr declaringType)
   at System.Reflection.RuntimeConstructorInfo.Invoke(BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
   at System.RuntimeType.CreateInstanceImpl(BindingFlags bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object[] activationAttributes)
   at Microsoft.ComponentStudio.ComponentPlatformInterface.Cpi.PlatformImplementation.CreateOfflineImageInstance(OfflineImageInfo imageInfo)
   --- End of inner exception stack trace ---
The one image that did work (LiteTouchPE_x64.wim) was from the OS I imported to Microsoft Workbench but the components are different to any that I have seen online when looking on how to do this.
I have made sure that the architecture is x64 and tried from ISO files I have on the system already but get the same error.
This is the first project I have been involved in and only ever done IT support before this.
Thanks for your help in advance.

Yes I am trying to capture a reference image that I have created on another machine and then reploy this through MDT. I am trying to open the Unattend.xml file because the "Capture and Sysprep" fails on the reference machine when trying to run
Sysprep. When I try to open the Unattend.xml file in MDT I get the error below:
Performing operation "generate" on Target "Catalog".
Starting: "C:\Program Files\Microsoft Deployment Toolkit\Bin\Microsoft.BDD.Catalog35.exe" "D:\Windows8.1 TEST3\Operating Systems\Windows8.1 x64\Sources\install.wim" 1 > "C:\Users\*****\AppData\Local\Temp\3\Microsoft.BDD.Catalog.log"
2>&1
No existing catalog file found.
PROGRESS: 0: Starting.
PROGRESS: 0: Creating mount folder: C:\Users\*****\AppData\Local\Temp\3\IMGMGR_install_Windows 8.1 Enterprise_njegg3ph.con.
PROGRESS: 5: Creating temp folder: C:\Users\*****\AppData\Local\Temp\3\IMGMGR_install_temp_qj0x3ga5.obv.
PROGRESS: 10: Mounting Windows image: D:\Windows8.1 TEST3\Operating Systems\Windows8.1 x64\Sources\install.wim. This might take a few minutes.
ERROR: Unable to generate catalog on D:\Windows8.1 TEST3\Operating Systems\Windows8.1 x64\Sources\install.wim: System.ComponentModel.Win32Exception: The process cannot access the file because it is being used by another process
   at Microsoft.ComponentStudio.ComponentPlatformInterface.WimImageInfo.PreCreateCatalog()
   at Microsoft.ComponentStudio.ComponentPlatformInterface.OfflineImageInfo.CreateCatalog()
   at Microsoft.BDD.Catalog.Program.DoCatalog()
Non-zero return code from catalog utility, rc = 2002

Error while trying to send a file through XI to SAP R/3 based OLTP system

Hi all,
I encountered with an error in the runtime workbench for the below mentioned scenario
ERROR message
<b>Unknown error: javax.ejb.CreateException: Neither messager server nor application server are defined for system IXI</b>
SCENARIO
The manufacturing system triggers an equipment failure. The failure message is sent through SAP Exchange Infrastructure (SAP XI) to the SAP R/3 based OLTP system,
changing the equipment status to a failure state. This is achieved by triggering the execution of Remote Function Call (RFC) present in the OLTP system from the SAP XI integration server.
Thanks and regards
Jishi

Hi Jishi,
Please check the Receiver RFC communication channel in your integration directory.
Check the logon parameters provided. From the error message, I guess there is no application server or message server provided, which is mandatory for XI to logon to the target backend R/3 system.

How can I install photoshop elements on a 64 bit windows system?

How can I install photoshop elements on a 64 bit windows system?

You just use the appropriate install disk/ download. See this:
Install Premiere Elements, Photoshop Elements
Or are you asking about some specific procedures?
Mylenium

System.ArithmeticException by Windows.System.Display.DisplayRequest.RequestRelease()

Could anyone shed some light on whey Windows.System.Display.DisplayRequest.RequestRelease()
occasionally throws System.ArithmeticException?
The error message is: Overflow or underflow in the arithmetic operation.
Hong

Hello,
I think we will need a lot more information to be able to really help you. A dump file would be a good place to start.
That said my first guess is that the internal reference counter is underflowing because you have more releases than requests. I would start by instrumenting your code and making sure you have exactly the same number of requests as you do releases.
I hope this helps,
James
Windows SDK Technologies - Microsoft Developer Services - http://blogs.msdn.com/mediasdkstuff/

AMD based Windows systems

Similar Messages

Maybe you are looking for