AMD can not work at first install itunes

I've just reinstalled my laptop. And i installed Itunes 10.5.1, but it said "Service 'AMD' failed to start. Verify that you have sufficient privileges to start system services". So how can i fix that? Thank you.
And when i sync my ipad, i can not untick some part which i don't want to sync. It just synced all.
One more, I can not sync some file .mp3 to my ipad, it said is not the right.
Thank you for your help. My itunes on Imac and Mac Air is good, but when i installed on windows, i got a lot of problems like that.

Hello there, JWCORE888.
The following Knowledge Base article provides some in-depth steps to troubleshoot your issue:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Similar Messages

Can not open, remove or install iTunes

Since uploading the latest update, I have not been able to use iTunes. It started when it could not find any tracks but this was resolved as iTunes was looking in the wrong place.
Now it will not even open, all I get is a warning - The folder path 'Program Files' contains an invalid character - I have tried to un-install this and get the same message and I have tried uploading an update and still get the same message.
Does anybody know a fix for this?

Try uninstalling it using windows cleanup utility the link is below
http://support.microsoft.com/kb/290301/en-us

I can not update my version of itunes. When I install the message "Could not open key UNKNOW \ Instaler \ Products \ E84E5F4E55179FC488DCF773E79CCA45 \ SourceList \ Media. Make sure you have sufficient access to that key or contact the support team." Any

I can not update my version of itunes. When I install the message "Could not open key UNKNOW \ Instaler \ Products \ E84E5F4E55179FC488DCF773E79CCA45 \ SourceList \ Media. Make sure you have sufficient access to that key or contact the support team." Any tips on how to solve this problem?

If doesn't work try use the instructions below BUT in BOTH folders, first in SourceList and after in the Media.
Start>Run put regedit and press Ok.
1. Go to the key: HKEY_CLASSES_ROOT\Installer\Products\9B00314CD581E574FBCE93FE37F2911B\SourceLis t\Media
2. Right click in Media folder, select Permissions from the menu.
3. You will see that is no user, on the "Permissions for..." dialog box which appears next, press the "Add.." button and add in the "All"
4. Back on the first "Permissions for..." dialog box, click on each account in the top-list and make sure each has the "Full Control = Allow" and "Read = Allow" permissions
5. Click the "Advanced" button and the "Advanced Security Settings" dialog box appears
6. On the "Permissions tab" enable the checkmark box named "Replace all child object permissions with inheritable permissions from this object", then press the "Apply" button
7. On the "Owner" tab, highlight the "Administrators" name in the lower listbox, enable the checkmark box called "Replace owner on subcontainers and objects" and press the "Apply Button"

Do I have to buy Lion or snow lepoard or is there a way to updated from OS X 10.4.11?? I have a new ipod that will not work without the ne itunes, but the new itunes will not install without a newer vesion of Max OS X. Help please :)

Do I have to buy Lion or snow lepoard or is there a way to updated from OS X 10.4.11?? I have a new ipod that will not work without the ne itunes, but the new itunes will not install without a newer vesion of Max OS X. Help please

Need to know your Mac model. If it's a PowerPC, the max OS is Leopard 10.5.x. If it's an Intel procesor, you can upgrade to Snow Leopard (for $29) & later to Lion.
*Mac OS X 10.5 Leopard installation system requirements*
http://support.apple.com/kb/TA24950
Leopard is no longer available at the Apple Store *but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753)*.
Installing Mac OS X 10.5 Leopard
http://support.apple.com/kb/HT1544
Mac OS X 10.5 Leopard Installation and Setup Guide
http://manuals.info.apple.com/en/leopard_install-setup.pdf
After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
 Cheers, Tom

Ear Sir: Yesterday on 18.09.2014 evening, I wanted to install IOS 8.0 according to your instructions iPhone 5S.during installation Stopped working and was closd, I can not work with him. Ibought it in the United States Apple Store Fifth 40venue 767 N

Dear Sir: Yesterday on 18.09.2014 evening, I wanted to install
IOS 8.0 according to your instructions iPhone 5S.during installation
Stopped working and was closd, I can not work with him. Ibought it in
the United States
Apple Store Fifth 40venue 767 New York NY1053
iPhone 5s Spase Gray 32 gb verizon.
Part Number: ME344ll / A.
Serial number: DN*******NjM.
Model A1533. I would like to request a new password for opening the
iPhone. Passwod..... Thank you very much,
Im not difficult for you to request a quick answer.Israel.
<Personal Information Edited By Host>

We are fellow users here on these forums, you're not talking to iTunes Support nor Apple - it looks like somebody has asked the hosts to remove your personal info from your post (it's not a good idea to post any personal info on any public forum).
What do you 'stopped working and was closed, I can not work with him' ? What exactly are you seeing on the phone's screen ?
If it's the activation screen and you can't remember your password for your account then see if you can get it reset via http://iforgot.apple.com

TS3682 unable to activate iphone, keep getting a error that server is not working. to hook to itunes. i have done that and still can not activate

i have iphone 4 and it worked previously but then lost service, contacted provider and said would have to do factory reset. Did the reset and now can not activate phone. said server was not working to connect to itunes. Connected to itunes and still can not activate it. any suggesgtions?

This is the iPod touch forum. I requested your post be moved to the iPhone forum

My printers are not working after mavericks install. What can I do to fix - PLEASE HELP! It is my lifeline - we are a print shop!

My printers are not working after mavericks install.
The printer just PAUSE and can't be resumed.
What can I do to fix - PLEASE HELP!
It is my lifeline - we are a print shop!

Go to the printer manufacture website and download the drivers for your printer model for OS X v10.9 Mavericks.
Then open System Preferences > Printers & Scanners > Print
Select your printer on the left then click - (minus)
Then click + (plus) to add the printer.

I've purchased 3 bundle movie packages, Sherlock Holmes, Batman, and The Godfather, I am can not find them in my itunes. I can only see the first movie in the series.

I've purchased 3 bundle movie packages, Sherlock Holmes, Batman, and The Godfather, I am can not find them in my itunes. I can only see the first movie in the series.

First of all, you should always save you photos on computer like any other digital camera.
Backup on iCloud or iTunes only backup your Camera Roll. The other photos should be already on the computer.
Note: Photos are not saved in iTunes, it's only a conduit between your iPhone and your photo managing software on computer.
What computer do you have?

HT201210 I can not restore my iPhone 4S itunes error says I have 29 and I put it in DFU mode and not working help please

Hello

I can not restore my iPhone 4S itunes error says I have 29 and I put it in DFU mode and not working help please

Security and privacy system preferences not working after Lion install. What to do?

Security and privacy system preference not working after Lion install. Not sure if it happen with Lion installer or after updating. What to do?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” (without the quotes) and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

Hi,my iphone is not recognized and it says- AMDS its not working

hi, i have a problem, my iphone is not recognized and it says that AMDS its not working so i restarted and it is set to automatic startup....but it still isnt working! so my question is can i reinstall my itunes? wont it affect the tings i have in it (i mean my pic and stuff)? im asking cos i remember that itunes always deleted my stuff on my ipod? and i gues i have forgoten my backup pass.....thank u very much for help

Hi Ken,
Dennis here from westport. I too am a goldmine user for many years and would love to know how you sync.
I am looking at a product called wmobile, but may be problematic on my current system.
thanks for any help...

I can not restore my iphone through iTunes

I can not restore my iphone through iTunes , it gives you can not restore error accured 3194

This often happens with Jailbroken phones. If that's the case, we can't support you in these forums as it is against the terms of use. This is Apple's information on error 3194:
This device is not eligible for the requested build: Also sometimes displayed as an "error 3194." If you receive this alert, update to the latest version of iTunes. Third-party security software or router security settings can also cause this issue. To resolve this, follow Troubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to performunauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. First you must uninstall the unauthorized modification software from the computer, then edit out the "gs.apple.com" redirect from the hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart. Also, using an older or modified .ipsw file can cause this issue. Try moving the current .ipsw file, or try restoring in a new user to ensure that iTunes downloads a new .ipsw.

Classes.zip can not work?

i am working in the environment of linux server plus oracle816,and i also connect to the server via jdbc on my 98 desktop.
unfortunately, right now, i only can connect to oracle server via local jdbc-odbc bridge,
both thin and oci echo
thead "main" error, noclassNOtfound,
although the classes12.zip has been set in the classpath.
i do not know whether need to do something on the calsses12.zip.
ps: one of the classes12.zip i download it from otn for NT,(there is no linux driver), the other one i found it from the $oracle_home/jdbc/lib. they all can not work.

Hi
It would be much easier to understand if You told
• How many movies - You want to include on the DVD
• The duration in time on each of them
• in what format they was recorded eg .H264, .mpeg4, streamingDV (as on miniDV tapes etc (.avi or .mov or .wmv are containers not formats)
• What theme did You use - with or without animation+sound
• use of audio other than .aiff 16-bit 48kHz - eg .mp3 or .wma etc (I don't)
If Your intention exceed 2 hour of movie + menu then I would consider
a. Save as a DiskImage - to see that the project runs OK
b. If still to large and a reduced quality is no problem - Burn this DiskImage by using Roxio Toast™ 11 Pro as it has a function - fit onto a DVD (at the cost of quality)
or
Cut up Your project into 2 parts and to two DVDs (As DL-DVD doesn't work for You)
Why formats of video and audio - some types don't work in iDVD OK and iDVD not able to burn is often one indication to this.
I feed iDVD only
• video - streamingDV from miniDV tapes
• photos - .jpg
• audio - .aiff 16-bit 48kHz or 44.1 from Audio CDs - NEVER directly from iTunes but via an Audio-CD first (burned in iTunes)
Yours Bengt W

After upgrading to 10.7.5 some of my AU plugins can not be validated in Logic pro. (I got error message "Remove property listener". I can not work anymore. What should I do?

After upgrading to 10.7.5 some of my AU plugins can not be validated in Logic pro. (I got error message "Remove property listener". I can not work anymore. What should I do?
VIBAC

I downloaded and installed
OS X Lion 10.7.5 Supplemental Update
and that solved my problem completely. (368 AU plugins now works!)

I was billed for a renewal with eHarmony that does not work. Eharmony said itunes claims the charge didnt go through but I have already been billed. How do I get my money back or get my subscription working??

I was billed for a renewal with eHarmony via iTunes that does not work. Eharmony said itunes claims the charge didnt go through but I have already been billed it is on my bank statement. How do I get my money back or get my subscription working?? I have all transaction ID's and invoice numbers. Please help this has been very frustrating, thanks.

Yes, I reported the problem using that exact sequence immediately after discovering the problem with the app. When I submitted my complaint and request, Apple redirected me the website of the app manufacturer where I submitted the same complaint/request for refund. I have not heard back from either, and was still charged, so I can only assume that is not the correct way to "Report a Problem" even though Apple would have you believe otherwise.

AMD can not work at first install itunes

Similar Messages

Maybe you are looking for