AMD Catalyst 11.1a Hotfix performance issues

Hey guys, has anyone noticed any performance drops in games, I had been replaying the original Crysis and had been getting around 40-42fps on max settings and after this update I'm now getting 23-25fps. I also noticed that my gpu temp isn't getting near as high as it was before this update,but GPU-Z still says my gpu load was 100%. ( originally up to 89C and now no higher that 69C) Any ideas?? Has anyone else experienced any drops in other games?

I have MSI R6870 Twin Frozr II Radeon HD 6870 1GB 256-bit GDDR5 PCI when using Catalyst 10.12 had some issues.
With Cat 11.1 pretty much gone away except I now have a 5-15 Frame Rate /fps drop practically in everything plus drops in my Benchmark Scores.
Out with the Old, In with the New .... get rid of One Headache just to be introduced to several more minor headaches.
AMD/ATI Failed Again ! Oops, there goes another >>>>>
That's the Way I ..ah ah ah I like IT ah ah. " Kool and the Gang" or KC and the Sunshine Band ..forget which one.
Anyways ... AMD delivered us another DUD ! 

Similar Messages

  • Performance issues with Imac intel 2011 27 inch..

    I have an 2011 imac 3,4 GHz Intel Core i7 with 16 GB 1333 MHz DDR3 RAM.
    Since a few months i noticed performance issues with FCPX, where before it would run through video it shows sometimes the color ball. Now the computer is slow in starting up and shutting down also. Ran disk utility but to no avail. I am now considering reinstalling mavericks.
    But I ran etrecheck.
    here are the results, please who can help me? I use this computer to edit and about everything else.
    copied:
    Problem description:
    slow start and slow quit of computer. Performance issues with fcpx and other programms.
    EtreCheck version: 2.1.8 (121)
    Report generated 6 maart 2015 21:49:31 CET
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        iMac (27-inch, Mid 2011) (Technical Specifications)
        iMac - model: iMac12,2
        1 3.4 GHz Intel Core i7 CPU: 4-core
        16 GB RAM Upgradeable
            BANK 0/DIMM0
                4 GB DDR3 1333 MHz ok
            BANK 1/DIMM0
                4 GB DDR3 1333 MHz ok
            BANK 0/DIMM1
                4 GB DDR3 1333 MHz ok
            BANK 1/DIMM1
                4 GB DDR3 1333 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
        AMD Radeon HD 6970M - VRAM: 1024 MB
            iMac 2560 x 1440
    System Software: ℹ️
        OS X 10.9.4 (13E28) - Time since boot: 0:7:46
    Disk Information: ℹ️
        WDC WD1001FALS-403AA0 disk1 : (1 TB)
            EFI (disk1s1) <not mounted> : 210 MB
            MacintoshHD2  (disk1s2) /Volumes/MacintoshHD2  : 999.86 GB (152.18 GB free)
        APPLE SSD TS256C disk0 : (251 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            MacintoshHD (disk0s2) / : 250.14 GB (62.78 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
        HL-DT-STDVDRW  GA32N
    USB Information: ℹ️
        Apple Inc. FaceTime HD Camera (Built-in)
        Mitsumi Electric Hub in Apple Extended USB Keyboard
            Logitech USB-PS/2 Optical Mouse
            Mitsumi Electric Apple Extended USB Keyboard
        Western Digital Ext HDD 1021 2 TB
            EFI (disk2s1) <not mounted> : 210 MB
            datavideo (disk2s2) /Volumes/datavideo : 1.37 TB (133.89 GB free)
            prive (disk2s3) /Volumes/prive : 627.23 GB (68.13 GB free) - 7 errors
        Apple Inc. BRCM2046 Hub
            Apple Inc. Bluetooth USB Host Controller
        Lexar  USB_3_0 Reader
        Seagate  Expansion Desk 3 TB
            EFI (disk3s1) <not mounted> : 315 MB
            downloads (disk3s2) /Volumes/downloads : 249.18 GB (138.35 GB free)
            BackUpBro (disk3s3) /Volumes/BackUpBro : 2.75 TB (1.03 TB free)
        Apple Internal Memory Card Reader
        Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
            G-Technology G-RAID with Thunderbolt
    Configuration files: ℹ️
        /etc/sysctl.conf - Exists
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /Applications/Toast 11 Titanium/Spin Doctor.app
        [not loaded]    com.hzsystems.terminus.driver (4) [Click for support]
            /Library/Extensions
        [not loaded]    com.Avid.driver.AvidDX (5.9.1 - SDK 10.8) [Click for support]
        [not loaded]    com.blackmagic-design.desktopvideo.iokit.driver (10.1.4 - SDK 10.8) [Click for support]
        [not loaded]    com.blackmagic-design.desktopvideo.iokit.framebufferdriver (10.1.4 - SDK 10.8) [Click for support]
        [not loaded]    com.blackmagic-design.desktopvideo.multibridge.iokit.driver (10.1.4 - SDK 10.8) [Click for support]
        [not loaded]    com.blackmagic-design.driver.BlackmagicIO (10.1.4 - SDK 10.8) [Click for support]
            /Library/Extensions/DeckLink_Driver.kext/Contents/PlugIns
        [not loaded]    com.blackmagic-design.desktopvideo.firmware (10.1.4 - SDK 10.8) [Click for support]
            /System/Library/Extensions
        [not loaded]    at.obdev.nke.LittleSnitch (3876 - SDK 10.8) [Click for support]
        [not loaded]    com.SafeNet.driver.Sentinel (7.5.2) [Click for support]
        [not loaded]    com.paceap.kext.pacesupport.master (5.9.1 - SDK 10.6) [Click for support]
        [not loaded]    com.roxio.BluRaySupport (1.1.6) [Click for support]
            /System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns
        [not loaded]    com.paceap.kext.pacesupport.leopard (5.9.1 - SDK 10.4) [Click for support]
        [not loaded]    com.paceap.kext.pacesupport.panther (5.9.1 - SDK 10.-1) [Click for support]
        [loaded]    com.paceap.kext.pacesupport.snowleopard (5.9.1 - SDK 10.6) [Click for support]
        [not loaded]    com.paceap.kext.pacesupport.tiger (5.9.1 - SDK 10.4) [Click for support]
            /Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
        [not loaded]    com.roxio.TDIXController (2.0) [Click for support]
    Startup Items: ℹ️
        Digidesign Mbox 2: Path: /Library/StartupItems/Digidesign Mbox 2
        DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
        Startup items are obsolete in OS X Yosemite
    Problem System Launch Agents: ℹ️
        [running]    com.paragon.NTFS.notify.plist [Click for support]
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.adobe.CS4ServiceManager.plist [Click for support]
        [loaded]    com.avid.ApplicationManager.plist [Click for support]
        [loaded]    com.avid.backgroundservicesmanager.plist [Click for support]
        [loaded]    com.avid.dmfsupportsvc.plist [Click for support]
        [loaded]    com.avid.interplay.dmfservice.plist [Click for support]
        [loaded]    com.avid.interplay.editortranscode.plist [Click for support]
        [loaded]    com.avid.transcodeserviceworker.plist [Click for support]
        [running]    com.blackmagic-design.DesktopVideoFirmwareUpdater.plist [Click for support]
        [failed]    com.brother.LOGINserver.plist [Click for support] [Click for details]
        [loaded]    com.paragon.updater.plist [Click for support]
        [failed]    com.teamviewer.teamviewer.plist [Click for support] [Click for details]
        [failed]    com.teamviewer.teamviewer_desktop.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.adobe.SwitchBoard.plist [Click for support]
        [loaded]    com.adobe.versioncueCS4.plist [Click for support]
        [loaded]    com.avid.AMCUninstaller.plist [Click for support]
        [running]    com.avid.interplay.editorbroker.plist [Click for support]
        [running]    com.avid.interplay.editortranscodestatus.plist [Click for support]
        [loaded]    com.blackmagic-design.desktopvideo.XPCService.plist [Click for support]
        [running]    com.blackmagic-design.DesktopVideoHelper.plist [Click for support]
        [running]    com.blackmagic-design.streaming.BMDStreamingServer.plist [Click for support]
        [not loaded]    com.digidesign.fwfamily.helper.plist [Click for support]
        [running]    com.edb.launchd.postgresql-8.4.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [loaded]    com.noiseindustries.FxFactory.FxPlug.plist [Click for support]
        [loaded]    com.noiseindustries.FxFactory.plist [Click for support]
        [running]    com.paceap.eden.licensed.plist [Click for support]
        [loaded]    com.teamviewer.Helper.plist [Click for support]
        [failed]    com.teamviewer.teamviewer_service.plist [Click for support]
        [loaded]    jp.co.canon.MasterInstaller.plist [Click for support]
        [loaded]    PACESupport.plist [Click for support]
    User Login Items: ℹ️
        iTunesHelper    Programma Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    Internet Plug-ins: ℹ️
        Default Browser: Version: 537 - SDK 10.9
        OfficeLiveBrowserPlugin: Version: 12.2.6 [Click for support]
        AdobePDFViewerNPAPI: Version: 11.0.0 - SDK 10.6 [Click for support]
        FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
        Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        iPhotoPhotocast: Version: 7.0 - SDK 10.8
        SharePointBrowserPlugin: Version: 14.0.0 [Click for support]
        AdobePDFViewer: Version: 11.0.0 - SDK 10.6 [Click for support]
        EPPEX Plugin: Version: 10.0 [Click for support]
        JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
    User internet Plug-ins: ℹ️
        Google Earth Web Plug-in: Version: 7.0 [Click for support]
    Audio Plug-ins: ℹ️
        DVCPROHDAudio: Version: 1.3.2
    3rd Party Preference Panes: ℹ️
        Blackmagic Desktop Video  [Click for support]
        DigidesignMbox2  [Click for support]
        Digidesign Mbox 2 Pro  [Click for support]
        Flash Player  [Click for support]
        Paragon NTFS for Mac ® OS X  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Mobile backups: OFF
        Auto backup: NO - Auto backup turned off
        Volumes being backed up:
            MacintoshHD: Disk size: 250.14 GB Disk used: 187.36 GB
            downloads: Disk size: 249.18 GB Disk used: 110.84 GB
        Destinations:
            G-RAID with Thunderbolt [Local]
            Total size: 8.00 TB
            Total number of backups: 6
            Oldest backup: 2014-04-08 14:24:41 +0000
            Last backup: 2014-09-24 21:58:28 +0000
            Size of backup disk: Excellent
                Backup size 8.00 TB > (Disk size 499.32 GB X 3)
    Top Processes by CPU: ℹ️
             2%    Google Chrome
             1%    WindowServer
             0%    opendirectoryd
             0%    mds
             0%    dpd
    Top Processes by Memory: ℹ️
        206 MB    mds_stores
        172 MB    com.apple.IconServicesAgent
        155 MB    Google Chrome
        137 MB    Dock
        113 MB    Google Chrome Helper
    Virtual Memory Information: ℹ️
        10.02 GB    Free RAM
        4.36 GB    Active RAM
        1.35 GB    Inactive RAM
        1.44 GB    Wired RAM
        1.24 GB    Page-ins
        0 B    Page-outs
    Diagnostics Information: ℹ️
        Mar 6, 2015, 09:37:26 PM    Self test - passed
        Mar 6, 2015, 08:15:56 PM    /Library/Logs/DiagnosticReports/Mail_2015-03-06-201556_[redacted].hang

    Problem description:
    disk problems
    EtreCheck version: 2.1.8 (121)
    Report generated 7 maart 2015 14:16:18 CET
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        iMac (27-inch, Mid 2011) (Technical Specifications)
        iMac - model: iMac12,2
        1 3.4 GHz Intel Core i7 CPU: 4-core
        16 GB RAM Upgradeable
            BANK 0/DIMM0
                4 GB DDR3 1333 MHz ok
            BANK 1/DIMM0
                4 GB DDR3 1333 MHz ok
            BANK 0/DIMM1
                4 GB DDR3 1333 MHz ok
            BANK 1/DIMM1
                4 GB DDR3 1333 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
        AMD Radeon HD 6970M - VRAM: 1024 MB
            iMac 2560 x 1440
    System Software: ℹ️
        OS X 10.9.4 (13E28) - Time since boot: 0:19:51
    Disk Information: ℹ️
        WDC WD1001FALS-403AA0 disk1 : (1 TB)
            EFI (disk1s1) <not mounted> : 210 MB
            MacintoshHD2  (disk1s2) /Volumes/MacintoshHD2  : 999.86 GB (152.18 GB free)
        APPLE SSD TS256C disk0 : (251 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            MacintoshHD (disk0s2) / : 250.14 GB (62.97 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
        HL-DT-STDVDRW  GA32N 
        HGST HDS724040ALE640 disk2 : (4 TB)
            EFI (disk2s1) <not mounted> : 210 MB
            disk2s2 (disk2s2) <not mounted> : 4.00 TB
            Boot OS X (disk2s3) <not mounted> : 134 MB  - one error
        HGST HDS724040ALE640 disk3 : (4 TB)
            EFI (disk3s1) <not mounted> : 210 MB
            disk3s2 (disk3s2) <not mounted> : 4.00 TB
            Boot OS X (disk3s3) <not mounted> : 134 MB
    USB Information: ℹ️
        Mitsumi Electric Hub in Apple Extended USB Keyboard
            Logitech USB-PS/2 Optical Mouse
            Mitsumi Electric Apple Extended USB Keyboard
        Apple Inc. BRCM2046 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. FaceTime HD Camera (Built-in)
        Lexar  USB_3_0 Reader 
        Seagate  Expansion Desk 3 TB
            EFI (disk5s1) <not mounted> : 315 MB
            downloads (disk5s2) /Volumes/downloads : 249.18 GB (138.35 GB free)
            BackUpBro (disk5s3) /Volumes/BackUpBro : 2.75 TB (1.03 TB free)
        Apple Computer, Inc. IR Receiver
        Apple Internal Memory Card Reader
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
            G-Technology G-RAID with Thunderbolt
    Configuration files: ℹ️
        /etc/sysctl.conf - Exists
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /Applications/Toast 11 Titanium/Spin Doctor.app
        [not loaded]    com.hzsystems.terminus.driver (4) [Click for support]
            /Library/Extensions
        [not loaded]    com.Avid.driver.AvidDX (5.9.1 - SDK 10.8) [Click for support]
        [not loaded]    com.blackmagic-design.desktopvideo.iokit.driver (10.1.4 - SDK 10.8) [Click for support]
        [not loaded]    com.blackmagic-design.desktopvideo.iokit.framebufferdriver (10.1.4 - SDK 10.8) [Click for support]
        [not loaded]    com.blackmagic-design.desktopvideo.multibridge.iokit.driver (10.1.4 - SDK 10.8) [Click for support]
        [not loaded]    com.blackmagic-design.driver.BlackmagicIO (10.1.4 - SDK 10.8) [Click for support]
            /Library/Extensions/DeckLink_Driver.kext/Contents/PlugIns
        [not loaded]    com.blackmagic-design.desktopvideo.firmware (10.1.4 - SDK 10.8) [Click for support]
            /System/Library/Extensions
        [not loaded]    at.obdev.nke.LittleSnitch (3876 - SDK 10.8) [Click for support]
        [not loaded]    com.SafeNet.driver.Sentinel (7.5.2) [Click for support]
        [not loaded]    com.paceap.kext.pacesupport.master (5.9.1 - SDK 10.6) [Click for support]
        [not loaded]    com.roxio.BluRaySupport (1.1.6) [Click for support]
            /System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns
        [not loaded]    com.paceap.kext.pacesupport.leopard (5.9.1 - SDK 10.4) [Click for support]
        [not loaded]    com.paceap.kext.pacesupport.panther (5.9.1 - SDK 10.-1) [Click for support]
        [loaded]    com.paceap.kext.pacesupport.snowleopard (5.9.1 - SDK 10.6) [Click for support]
        [not loaded]    com.paceap.kext.pacesupport.tiger (5.9.1 - SDK 10.4) [Click for support]
            /Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
        [not loaded]    com.roxio.TDIXController (2.0) [Click for support]
    Startup Items: ℹ️
        Digidesign Mbox 2: Path: /Library/StartupItems/Digidesign Mbox 2
        DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
        Startup items are obsolete in OS X Yosemite
    Problem System Launch Agents: ℹ️
        [running]    com.paragon.NTFS.notify.plist [Click for support]
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.adobe.CS4ServiceManager.plist [Click for support]
        [running]    com.avid.ApplicationManager.plist [Click for support]
        [running]    com.avid.backgroundservicesmanager.plist [Click for support]
        [loaded]    com.avid.dmfsupportsvc.plist [Click for support]
        [loaded]    com.avid.interplay.dmfservice.plist [Click for support]
        [loaded]    com.avid.interplay.editortranscode.plist [Click for support]
        [loaded]    com.avid.transcodeserviceworker.plist [Click for support]
        [running]    com.blackmagic-design.DesktopVideoFirmwareUpdater.plist [Click for support]
        [failed]    com.brother.LOGINserver.plist [Click for support] [Click for details]
        [loaded]    com.paragon.updater.plist [Click for support]
        [failed]    com.teamviewer.teamviewer.plist [Click for support] [Click for details]
        [failed]    com.teamviewer.teamviewer_desktop.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.adobe.SwitchBoard.plist [Click for support]
        [loaded]    com.adobe.versioncueCS4.plist [Click for support]
        [loaded]    com.avid.AMCUninstaller.plist [Click for support]
        [running]    com.avid.interplay.editorbroker.plist [Click for support]
        [running]    com.avid.interplay.editortranscodestatus.plist [Click for support]
        [loaded]    com.blackmagic-design.desktopvideo.XPCService.plist [Click for support]
        [running]    com.blackmagic-design.DesktopVideoHelper.plist [Click for support]
        [running]    com.blackmagic-design.streaming.BMDStreamingServer.plist [Click for support]
        [not loaded]    com.digidesign.fwfamily.helper.plist [Click for support]
        [running]    com.edb.launchd.postgresql-8.4.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [loaded]    com.noiseindustries.FxFactory.FxPlug.plist [Click for support]
        [loaded]    com.noiseindustries.FxFactory.plist [Click for support]
        [running]    com.paceap.eden.licensed.plist [Click for support]
        [loaded]    com.teamviewer.Helper.plist [Click for support]
        [failed]    com.teamviewer.teamviewer_service.plist [Click for support]
        [loaded]    jp.co.canon.MasterInstaller.plist [Click for support]
        [loaded]    PACESupport.plist [Click for support]
    User Login Items: ℹ️
        iTunesHelper    Programma Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    Internet Plug-ins: ℹ️
        Default Browser: Version: 537 - SDK 10.9
        OfficeLiveBrowserPlugin: Version: 12.2.6 [Click for support]
        AdobePDFViewerNPAPI: Version: 11.0.0 - SDK 10.6 [Click for support]
        FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
        Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        iPhotoPhotocast: Version: 7.0 - SDK 10.8
        SharePointBrowserPlugin: Version: 14.0.0 [Click for support]
        AdobePDFViewer: Version: 11.0.0 - SDK 10.6 [Click for support]
        EPPEX Plugin: Version: 10.0 [Click for support]
        JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
    User internet Plug-ins: ℹ️
        Google Earth Web Plug-in: Version: 7.0 [Click for support]
    Audio Plug-ins: ℹ️
        DVCPROHDAudio: Version: 1.3.2
    3rd Party Preference Panes: ℹ️
        Blackmagic Desktop Video  [Click for support]
        DigidesignMbox2  [Click for support]
        Digidesign Mbox 2 Pro  [Click for support]
        Flash Player  [Click for support]
        Paragon NTFS for Mac ® OS X  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Mobile backups: OFF
        Auto backup: NO - Auto backup turned off
        Volumes being backed up:
            MacintoshHD: Disk size: 250.14 GB Disk used: 187.17 GB
            downloads: Disk size: 249.18 GB Disk used: 110.83 GB
        Destinations:
            G-RAID with Thunderbolt [Local]
            Total size: 8.00 TB
            Total number of backups: 6
            Oldest backup: 2014-04-08 14:24:41 +0000
            Last backup: 2014-09-24 21:58:28 +0000
            Size of backup disk: Excellent
                Backup size 8.00 TB > (Disk size 499.32 GB X 3)
    Top Processes by CPU: ℹ️
             2%    WindowServer
             1%    fontd
             0%    firefox
             0%    AvidApplicationManager
             0%    AppleSpell
    Top Processes by Memory: ℹ️
        498 MB    firefox
        241 MB    mds_stores
        172 MB    com.apple.IconServicesAgent
        137 MB    Dock
        100 MB    java
    Virtual Memory Information: ℹ️
        12.33 GB    Free RAM
        2.39 GB    Active RAM
        1.11 GB    Inactive RAM
        1.34 GB    Wired RAM
        934 MB    Page-ins
        0 B    Page-outs
    Diagnostics Information: ℹ️
        Mar 7, 2015, 01:56:19 PM    Self test - passed
        Mar 6, 2015, 08:15:56 PM    /Library/Logs/DiagnosticReports/Mail_2015-03-06-201556_[redacted].hang

  • Amd catalyst & built-in display driver clash

    Hello,
    I have a core i5 HP pavilion dv6 entertainment notebook pc with the following specs:
    Processor: 2.53Ghz
    RAM: 8 Gb
    Operating system: Win 7 x64
    AMD Radeon HD 6500M/5600/5700 Series: 1 GB
    System Model: 3141se
    I had a recovery partition on my laptop but a while back when I tried to run it, I kept on getting the same error message " your partition is of GPT style or something like that" and I had to wipe the whole drive and tried recovering from the backup DVDs, without any luck.
    Having said that, I installed another copy of Win 7 with the original key provided and it was working fine. A couple of days back I installed a fresh copy of windows and now the problem I am facing is something like that:
    Built-in intel display and AMD display driver installs, but I dont see anything in adapter section. Which means no graphics card is installed. When ever I install AMD catalyst driver, my windows turn black and stay that way forever (even though windows in running normally). 
    Whenever I disable built-in display driver from "device manager" it  works fine. But I have had no luck installing AMD catalyst control, I tried literally every version available. 
    Kindly, help me fix this issue. My Laptop is a crap without the graphics card. 
    quick help would be appreciated.
    Thank you

    Use the recovery media to install the AMD graphics driver softpaq.
    Choose the AMD video graphics softpaq from the list that appears. The following image is an example from a former HP product loan I was provided by HP. What you see will be a bit different since the notebooks are not in the same model range.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • MacBook Pro performance issues w/2nd monitor and FCP7

    I have this MacBook Pro bought brand-new in January 2010:
      Model Name: MacBook Pro
      Model Identifier: MacBookPro5,2
      Processor Name: Intel Core 2 Duo
      Processor Speed: 3.06 GHz
      Number Of Processors: 1
      Total Number Of Cores: 2
      L2 Cache: 6 MB
      Memory: 8 GB
      Bus Speed: 1.07 GHz
    and until today had never attached a second monitor to it. Today I hooked up my Samsung 24" to do some dual screen editing in Final Cut 7.0.3. I was unable to play back my video at full speed in the second monitor, and after a few seconds of skippy playback I'd get that error message about unable to play back video at full speed and to check my RT settings. I was using a Mini DisplayPort to DVI adapter. My computer has no issues playing the video in the laptop's monitor at any resolution and any quality settings (I've never changed the RT settings or anything else in the menu ever but I tried every combination this time). I then tried using my TV as a 2nd monitor with an HDMI adapter. Same performance issues. I then tried my friend's newer 13" MBP 8,1 and it performed flawlessly with the same project & footage. I feel like my $3,000 computer should outperform a $1,200 one even if mine is a year and a half older. Any advice?
    Chris

    Wow, you posted this perfectly to coincide with an identical problem, albeit using Logic Pro 9.1.5 rather than FCP.
    Last week, I purchased a 23" external monitor to use alongside my "flagship" 2011 15" hi-res, 2.3 i7 Macbook Pro with 8Gb of RAM.
    It is connected via a mini-DVI to D-sub analog (not that that should matter?) and all appeared fine.
    The first issue I had was with my MBP's fan now running CONSTANTLY, when I have the second monitor attached. Even when the machine is completely idle.
    When using the machine to record audio, this is a fairly hefty problem and not something I had anticipated - indeed why would I anticipate such a thing?
    What is far, far worse though is that over the last few days I have had repeated problems with performance drop-outs and errors in Logic and I have trying to fathom out why. Realising that the only major system change made, was the above monitor connection, I ran some tests.
    I restarted my MBP, no other apps were running and with my new 23" monitor attached acting as main display with MBP built in display on as secondary
    I loaded up a fairly demanding Logic project which was hitting 40% to 60% CPU usage when using the built in MBP display last week
    I ran activity monitor and had CPU usage history open
    The above project now repeatedly overloads and playback halts in a given 8 bar section - with CPU at 80% most of the time
    I disconnected the external display, no shut down, I just let the machine switch to the built in 15".
    Started the same project, the same 8 bar section and hey presto - CPU usage back down to 40% to 60%
    The above was reflected in the CPU usage history with the graph showing CPU use down by about a half, when running this Logic project WITHOUT the external display.
    There is a very useful benchmark Logic project that has been used as a test by many users to gauge Logic performance on given Apple hardware.
    The project has about 100 tracks pre-configured with CPU intensive plugins, designed to tax the CPU.
    The idea is that you load up the project with tracks muted, press play and then unmute the tracks steadily until Logic us unable to play contiunously because of a system performance error.
    On my MBP, with the external monitor NOT attached, I can play back around 50 of the audio tracks in this benchmark project.
    With the monitor attached, I can get about 22 tracks playing.... which is actually a far worse a performance drop (-50% I think!?) than with the first example!
    I did also try with just the external monitor attached and not the MBP display and performance was about 10% better than with dual monitors - so still extremely poor, to say the least.
    This machine is the flagship MBP and has a dedicated AMD Radeon HD6750 GPU which should take care of most if not ALL graphics processing - I mean it's capable of running some pretty demanding games!
    Putting aside the issue of constant fan noise, there is no reason AT ALL, why using an external monitor should tax the i7 CPU this way - it's not as though Logic is graphically demanding... far from it.
    I am on 10.6.8, Logic 9.1.5, all apps up to date via "Software Update".
    I will of course, be contacting Apple...

  • Performance issues since upgrade

    I am on a late 2011 MacBook Pro and am having severs performance issues since upgrading to Mavericks. I fear my issues may be related to company installed anti-virus (which I cannot remove), but I was hoping someone could look over my EtreCheck for other potential solutions.
    One really odd issue I am having, which I cannot seem to find good information for on Google, is at least 4-5 times a day my Mac just stops. No beach ball, no anything, for about 1-5 minutes. Then it's fine. Maybe just me grasping at straws, but it seems related to a when webpage loads a bunch of images? I always use Safari btw, but testing other browsers, like Chrome & Firefox, it happens as well.
    I have also removed TotalFinder and have noticed no improvement and still have the above issue.
    Thanks in advance!
    Here is my EtreCheck:
    Problem description:
    slow performance on Mavericks
    EtreCheck version: 2.0.11 (98)
    Report generated November 11, 2014 at 8:51:26 AM EST
    Hardware Information: ℹ️
      MacBook Pro (17-inch, Late 2011) (Verified)
      MacBook Pro - model: MacBookPro8,3
      1 2.5 GHz Intel Core i7 CPU: 4-core
      8 GB RAM Upgradeable
      BANK 0/DIMM0
      4 GB DDR3 1333 MHz ok
      BANK 1/DIMM0
      4 GB DDR3 1333 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 3000 - VRAM: 512 MB
      AMD Radeon HD 6770M - VRAM: 1024 MB
      Color LCD 1920 x 1200
      LED Cinema Display 1920 x 1200
    System Software: ℹ️
      OS X 10.9.5 (13F34) - Uptime: 0:46:22
    Disk Information: ℹ️
      APPLE HDD HTS727575A9E362 disk0 : (750.16 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Macintosh HD (disk0s2) /  [Startup]: 749.30 GB (256.69 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      MATSHITADVD-R   UJ-8A8
    USB Information: ℹ️
      Apple Inc. FaceTime HD Camera (Built-in)
      Fitbit Inc. Fitbit Base Station
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple, Inc. Keyboard Hub
      Apple, Inc Apple Keyboard
      Tablet PTZ-630
      Logitech Logitech USB Headset
      Apple Inc. Display iSight
      Apple Inc. Apple LED Cinema Display
      Apple Inc. Display Audio
      Apple Computer, Inc. IR Receiver
    Firewire Information: ℹ️
      Iomega HDD unknown_device 800mbit - 800mbit max
      S.M.A.R.T. Status: Verified
      disk1s1 (disk1s1) <not mounted> : 32 KB
      Iomega HDD (disk1s3) /Volumes/Iomega HDD : 500.04 GB (22.88 GB free)
      Files (disk1s5) /Volumes/Files : 499.90 GB (416.87 GB free)
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Anywhere
    Kernel Extensions: ℹ️
      /Library/Application Support/Symantec/Protector
      [not loaded] com.symantec.kext.protector.panther (1.0f5) Support
      [not loaded] com.symantec.kext.protector.tigerplus (1.0f5) Support
      /Library/StartupItems/SymAutoProtect
      [loaded] com.Symantec.kext.SAVAPComm (11.0.6) Support
      /System/Library/Extensions
      [loaded] com.Cycling74.driver.Soundflower (1.5.1) Support
      [loaded] com.InnovationTechnology.driver.ComputerAudio (1.01 - SDK 10.7) Support
      [not loaded] com.cisco.nke.ipsec (2.0.1) Support
      [not loaded] com.wacom.kext.wacomtablet (6.3.7 - SDK 10.8) Support
    Startup Items: ℹ️
      CiscoVPN: Path: /System/Library/StartupItems/CiscoVPN
      NortonMissedTasks: Path: /Library/StartupItems/NortonMissedTasks
      SMC: Path: /Library/StartupItems/SMC
      SymAutoProtect: Path: /Library/StartupItems/SymAutoProtect
      SymProtector: Path: /Library/StartupItems/SymProtector
      Startup items are obsolete and will not work in future versions of OS X
    Launch Agents: ℹ️
      [not loaded] com.adobe.AAM.Updater-1.0.plist Support
      [loaded] com.adobe.CS5ServiceManager.plist Support
      [loaded] com.google.keystone.agent.plist Support
      [running] com.jamfsoftware.jamf.agent.plist Support
      [loaded] com.oracle.java.Java-Updater.plist Support
      [running] com.symantec.quickmenu.application.plist Support
      [running] com.wacom.wacomtablet.plist Support
      [running] net.juniper.pulsetray.plist Support
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist Support
      [running] com.fitbit.fitbitd.plist Support
      [running] com.fitbit.galileod.plist Support
      [loaded] com.google.keystone.daemon.plist Support
      [running] com.jamfsoftware.jamf.daemon.plist Support
      [not loaded] com.jamfsoftware.startupItem.plist Support
      [loaded] com.jamfsoftware.task.1.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
      [loaded] com.oracle.java.Helper-Tool.plist Support
      [loaded] com.oracle.java.JavaUpdateHelper.plist Support
      [loaded] com.rogueamoeba.instanton-agent.plist Support
      [running] net.juniper.AccessService.plist Support
      [loaded] net.juniper.UninstallPulse.plist Support
    User Launch Agents: ℹ️
      [loaded] com.valvesoftware.steamclean.plist Support
      [running] ws.agile.1PasswordAgent.plist Support
    User Login Items: ℹ️
      gfxCardStatus Application (/Users/[redacted]/Downloads/gfxCardStatus.app)
      Dropbox Application (/Applications/Dropbox.app)
      Microsoft Database Daemon Application (/Applications/Microsoft Office 2011/Office/Microsoft Database Daemon.app)
      cdn Volume (/Volumes/cdn)
      TotalFinder Application (/Applications/TotalFinder.app)
      SAVDiskMountNotify Application (/Library/Application Support/Symantec/AntiVirus/SAVDiskMountNotify.app)
      ScanNotification Application (/Library/Application Support/Symantec/AntiVirus/ScanNotification.app)
      SymSecondaryLaunch Application (/Library/Application Support/Norton Solutions Support/Scheduler/SymSecondaryLaunch.app)
    Internet Plug-ins: ℹ️
      OfficeLiveBrowserPlugin: Version: 12.3.6 Support
      Flash Player: Version: 15.0.0.189 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.223
      AdobePDFViewer: Version: 10.0.2 Support
      Unity Web Player: Version: UnityPlayer version 4.5.4f1 - SDK 10.6 Support
      googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
      AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 Support
      iPhotoPhotocast: Version: 7.0
      DirectorShockwave: Version: 11.5.9r620 Support
      QuickTime Plugin: Version: 7.7.3
      FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
      Silverlight: Version: 4.0.60310.0 Support
      MeetingJoinPlugin: Version: (null) - SDK 10.6 Support
      net.juniper.DSSafariExtensions: Version: (null) Support
      Default Browser: Version: 537 - SDK 10.9
      Flip4Mac WMV Plugin: Version: 2.3.1.2 Support
      o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
      WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 Support
      SharePointBrowserPlugin: Version: 14.4.5 - SDK 10.6 Support
      JavaAppletPlugin: Version: Java 7 Update 71 Check version
      WacomNetscape: Version: 2.1.0-1 - SDK 10.8 Support
    User Internet Plug-ins: ℹ️
      SOEWebInstaller: Version: 1.0 - SDK 10.5 Support
      Aspera Web 3.1.2.72265: Version: (null) - SDK 10.6 Support
    Safari Extensions: ℹ️
      1Password
      Adblock Plus
      Reddit Enhancement Suite
    3rd Party Preference Panes: ℹ️
      Flash Player  Support
      Flip4Mac WMV  Support
      Java  Support
      MacFUSE  Support
      SymAutoProtect
      Symantec\nQuickMenu  Support
      WacomTablet  Support
    Time Machine: ℹ️
      Skip System Files: NO
      Mobile backups: ON
      Auto backup: YES
      Destinations:
      Iomega HDD [Local]
      Total size: 500.04 GB
      Total number of backups: 37
      Oldest backup: 2014-10-14 14:11:11 +0000
      Last backup: 2014-11-11 13:27:48 +0000
      Size of backup disk: Excellent
      Backup size 500.04 GB > (Disk size 0 B X 3)
    Top Processes by CPU: ℹ️
          36% com.apple.WebKit.Plugin.64
          34% SymAutoProtect
          13% WindowServer
          9% Unity
          4% Activity Monitor
    Top Processes by Memory: ℹ️
      455 MB Safari
      361 MB com.apple.WebKit.Plugin.64
      292 MB Unity
      77 MB com.apple.WebKit.Networking
      77 MB com.apple.WebKit.WebContent
    Virtual Memory Information: ℹ️
      2.08 GB Free RAM
      2.39 GB Active RAM
      1.34 GB Inactive RAM
      1.40 GB Wired RAM
      1.11 GB Page-ins
      5.54 GB Page-outs

    Activity Monitor - Mavericks  also Yosemite
    Activity Monitor in Mavericks has significant changes
    Performance Guide
    Why is my computer slow
    Why your Mac runs slower than it should
    Slow Mac After Mavericks
    Things you can do to resolve slowdowns  see post by Kappy

  • [AMD Catalyst] problem with "major" file

    Hi, I'm using now the free driver xf86-video-ati for my [Radeon 9200 SE] card, and for several reasons, I want to switch to the proprietary driver, Catalyst.
    I followed all the steps of the wiki, but when I "startx", it display:
    ukiDynamicMajor = failed to open /proc/ati/major
    I would precise that the command "modprobe fglrx"  says "fglrx is not a valid expression". I hesitated to use aticonfig, but people say that creating one xorg.cong is bad; thus I have deleted this option.
    What I have done:
    pacman -S catalyst-hook catalyst-utils catalyst-libgl opencl-catalyst (install succeed)
    pacman -R xf86-video-intel xf86-input-evdev (uninstall succeed exept for xf86-input-evdev because of his dependence on xorg-server)
    modprobe fglrx (doesn't work)
    touch /etc/modules-load.d/catalyst.conf (the file already exist)
    less /etc/modules-load.d/catalyst.conf ("fglrx")
    touch /etc/X11/xorg-conf.d/20-catalyst.conf
    nano /etc/X11/xorg-conf.d/20-catalyst.conf
    [quote]
    Section "Device"
    Identifier "Card0"
    Driver "fglrx"
    VendorName "ATI Technologies Inc"
    BusID "PCI:1:00:1"
    EndSection
    [/quote]
    rnmod radeon (doesn't work => rnmod is not a valid program)
    touch /etc/modprobe.d/radeon_blacklist (sucessful)
    echo /etc/modprobe.d/radeon_blacklist "blacklist radeon"( sucessful)
    Config:
    uname -a
    Linux archlinux-desktop 3.14.3-1-ARCH #1 SMP PREEMPT Tue May 6 22:45:18 CEST 2014 i686 GNU/Linux
    lspci
    00:00.0 Host bridge: Silicon Integrated Systems [SiS] 645xx (rev 51)
    00:01.0 PCI bridge: Silicon Integrated Systems [SiS] AGP Port (virtual PCI-to-PCI bridge)
    00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] LPC Controller (rev 14)
    00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2/3 SMBus controller
    00:02.3 FireWire (IEEE 1394): Silicon Integrated Systems [SiS] FireWire Controller
    00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 IDE Controller
    00:02.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0)
    00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS7012 AC'97 Sound Controller (rev a0)
    00:03.0 USB controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
    00:03.1 USB controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
    00:03.2 USB controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
    00:03.3 USB controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
    00:0f.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
    01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV280 [Radeon 9200 SE] (rev 01)
    01:00.1 Display controller: Advanced Micro Devices, Inc. [AMD/ATI] RV280 [Radeon 9200 SE] (Secondary) (rev 01)
    dmesg 
    [    0.000000] Initializing cgroup subsys cpuset
    [    0.000000] Initializing cgroup subsys cpu
    [    0.000000] Initializing cgroup subsys cpuacct
    [    0.000000] Linux version 3.14.3-1-ARCH (nobody@var-lib-archbuild-testing-i686-tobias) (gcc version 4.9.0 (GCC) ) #1 SMP PREEMPT Tue May 6 22:45:18 CEST 2014
    [    0.000000] e820: BIOS-provided physical RAM map:
    [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
    [    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
    [    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
    [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffeffff] usable
    [    0.000000] BIOS-e820: [mem 0x000000001fff0000-0x000000001fff2fff] ACPI NVS
    [    0.000000] BIOS-e820: [mem 0x000000001fff3000-0x000000001fffffff] ACPI data
    [    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
    [    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
    [    0.000000] SMBIOS 2.3 present.
    [    0.000000] DMI: Packard Bell NEC 00000000000000000000000, BIOS F2 10/15/2003
    [    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [    0.000000] e820: last_pfn = 0x1fff0 max_arch_pfn = 0x100000
    [    0.000000] MTRR default type: uncachable
    [    0.000000] MTRR fixed ranges enabled:
    [    0.000000]   00000-9FFFF write-back
    [    0.000000]   A0000-BFFFF uncachable
    [    0.000000]   C0000-CAFFF write-protect
    [    0.000000]   CB000-EFFFF uncachable
    [    0.000000]   F0000-FFFFF write-through
    [    0.000000] MTRR variable ranges enabled:
    [    0.000000]   0 base 000000000 mask FE0000000 write-back
    [    0.000000]   1 base 0D0000000 mask FF8000000 write-combining
    [    0.000000]   2 disabled
    [    0.000000]   3 disabled
    [    0.000000]   4 disabled
    [    0.000000]   5 disabled
    [    0.000000]   6 disabled
    [    0.000000]   7 disabled
    [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [    0.000000] found SMP MP-table at [mem 0x000f5370-0x000f537f] mapped at [c00f5370]
    [    0.000000] Scanning 1 areas for low memory corruption
    [    0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
    [    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
    [    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [    0.000000]  [mem 0x00000000-0x000fffff] page 4k
    [    0.000000] init_memory_mapping: [mem 0x1f800000-0x1fbfffff]
    [    0.000000]  [mem 0x1f800000-0x1fbfffff] page 2M
    [    0.000000] init_memory_mapping: [mem 0x18000000-0x1f7fffff]
    [    0.000000]  [mem 0x18000000-0x1f7fffff] page 2M
    [    0.000000] init_memory_mapping: [mem 0x00100000-0x17ffffff]
    [    0.000000]  [mem 0x00100000-0x003fffff] page 4k
    [    0.000000]  [mem 0x00400000-0x17ffffff] page 2M
    [    0.000000] init_memory_mapping: [mem 0x1fc00000-0x1ffeffff]
    [    0.000000]  [mem 0x1fc00000-0x1ffeffff] page 4k
    [    0.000000] BRK [0x01798000, 0x01798fff] PGTABLE
    [    0.000000] RAMDISK: [mem 0x1efe2000-0x1f302fff]
    [    0.000000] ACPI: RSDP 000f7520 000014 (v00 GBT   )
    [    0.000000] ACPI: RSDT 1fff3000 00002C (v01 GBT    AWRDACPI 42302E31 AWRD 01010101)
    [    0.000000] ACPI: FACP 1fff3040 000074 (v01 GBT    AWRDACPI 42302E31 AWRD 01010101)
    [    0.000000] ACPI: DSDT 1fff30c0 003104 (v01 GBT    AWRDACPI 00001000 MSFT 0100000C)
    [    0.000000] ACPI: FACS 1fff0000 000040
    [    0.000000] ACPI: APIC 1fff6200 000068 (v01 GBT    AWRDACPI 42302E31 AWRD 01010101)
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] 0MB HIGHMEM available.
    [    0.000000] 511MB LOWMEM available.
    [    0.000000]   mapped low ram: 0 - 1fff0000
    [    0.000000]   low ram: 0 - 1fff0000
    [    0.000000] BRK [0x01799000, 0x01799fff] PGTABLE
    [    0.000000] Zone ranges:
    [    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
    [    0.000000]   Normal   [mem 0x01000000-0x1ffeffff]
    [    0.000000]   HighMem  empty
    [    0.000000] Movable zone start for each node
    [    0.000000] Early memory node ranges
    [    0.000000]   node   0: [mem 0x00001000-0x0009efff]
    [    0.000000]   node   0: [mem 0x00100000-0x1ffeffff]
    [    0.000000] On node 0 totalpages: 130958
    [    0.000000] free_area_init_node: node 0, pgdat c15fc600, node_mem_map dfbf0020
    [    0.000000]   DMA zone: 32 pages used for memmap
    [    0.000000]   DMA zone: 0 pages reserved
    [    0.000000]   DMA zone: 3998 pages, LIFO batch:0
    [    0.000000]   Normal zone: 992 pages used for memmap
    [    0.000000]   Normal zone: 126960 pages, LIFO batch:31
    [    0.000000] Using APIC driver default
    [    0.000000] ACPI: PM-Timer IO Port: 0x1008
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
    [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [    0.000000] IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
    [    0.000000] ACPI: IRQ0 used by override.
    [    0.000000] ACPI: IRQ2 used by override.
    [    0.000000] ACPI: IRQ9 used by override.
    [    0.000000] Using ACPI (MADT) for SMP configuration information
    [    0.000000] smpboot: Allowing 2 CPUs, 1 hotplug CPUs
    [    0.000000] nr_irqs_gsi: 40
    [    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
    [    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
    [    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
    [    0.000000] e820: [mem 0x20000000-0xfebfffff] available for PCI devices
    [    0.000000] Booting paravirtualized kernel on bare hardware
    [    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
    [    0.000000] PERCPU: Embedded 14 pages/cpu @dfbd0000 s33792 r0 d23552 u57344
    [    0.000000] pcpu-alloc: s33792 r0 d23552 u57344 alloc=14*4096
    [    0.000000] pcpu-alloc: [0] 0 [0] 1
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129934
    [    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=14bd8feb-04a9-4b92-b3cb-798729208c52 rw quiet
    [    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
    [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    [    0.000000] Initializing CPU#0
    [    0.000000] allocated 1048440 bytes of page_cgroup
    [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [    0.000000] Initializing HighMem for node 0 (00000000:00000000)
    [    0.000000] Memory: 507120K/523832K available (4446K kernel code, 470K rwdata, 1280K rodata, 568K init, 956K bss, 16712K reserved, 0K highmem)
    [    0.000000] virtual kernel memory layout:
        fixmap  : 0xfff15000 - 0xfffff000   ( 936 kB)
        pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
        vmalloc : 0xe07f0000 - 0xff7fe000   ( 496 MB)
        lowmem  : 0xc0000000 - 0xdfff0000   ( 511 MB)
          .init : 0xc160f000 - 0xc169d000   ( 568 kB)
          .data : 0xc1457c92 - 0xc160eb40   (1755 kB)
          .text : 0xc1000000 - 0xc1457c92   (4447 kB)
    [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [    0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [    0.000000] Preemptible hierarchical RCU implementation.
    [    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
    [    0.000000]     Dump stacks of tasks blocking RCU-preempt GP.
    [    0.000000]     RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
    [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
    [    0.000000] NR_IRQS:2304 nr_irqs:512 16
    [    0.000000] CPU 0 irqstacks, hard=df408000 soft=df40a000
    [    0.000000] Console: colour dummy device 80x25
    [    0.000000] console [tty0] enabled
    [    0.000000] tsc: Fast TSC calibration using PIT
    [    0.000000] tsc: Detected 2625.859 MHz processor
    [    0.003353] Calibrating delay loop (skipped), value calculated using timer frequency.. 5253.53 BogoMIPS (lpj=8752863)
    [    0.003360] pid_max: default: 32768 minimum: 301
    [    0.003378] ACPI: Core revision 20131218
    [    0.008679] ACPI: All ACPI Tables successfully acquired
    [    0.010020] Security Framework initialized
    [    0.010032] Yama: becoming mindful.
    [    0.010064] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.010069] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.010456] Initializing cgroup subsys memory
    [    0.010473] Initializing cgroup subsys devices
    [    0.010478] Initializing cgroup subsys freezer
    [    0.010482] Initializing cgroup subsys net_cls
    [    0.010485] Initializing cgroup subsys blkio
    [    0.010546] CPU0: Hyper-Threading is disabled
    [    0.010555] mce: CPU supports 4 MCE banks
    [    0.010568] CPU0: Thermal monitoring enabled (TM1)
    [    0.010592] Last level iTLB entries: 4KB 128, 2MB 128, 4MB 128
    Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64, 1GB 0
    tlb_flushall_shift: 6
    [    0.018898] ftrace: allocating 18912 entries in 37 pages
    [    0.026857] Enabling APIC mode:  Flat.  Using 1 I/O APICs
    [    0.027167] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [    0.062643] smpboot: CPU0: Intel(R) Celeron(R) CPU 2.60GHz (fam: 0f, model: 02, stepping: 09)
    [    0.063333] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
    [    0.063333] ... version:                0
    [    0.063333] ... bit width:              40
    [    0.063333] ... generic registers:      18
    [    0.063333] ... value mask:             000000ffffffffff
    [    0.063333] ... max period:             0000007fffffffff
    [    0.063333] ... fixed-purpose events:   0
    [    0.063333] ... event mask:             000000000003ffff
    [    0.076710] x86: Booted up 1 node, 1 CPUs
    [    0.076719] smpboot: Total of 1 processors activated (5253.53 BogoMIPS)
    [    0.077148] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [    0.077427] devtmpfs: initialized
    [    0.077889] PM: Registering ACPI NVS region [mem 0x1fff0000-0x1fff2fff] (12288 bytes)
    [    0.079963] pinctrl core: initialized pinctrl subsystem
    [    0.080103] RTC time: 16:19:41, date: 05/12/14
    [    0.080222] NET: Registered protocol family 16
    [    0.080459] cpuidle: using governor ladder
    [    0.080464] cpuidle: using governor menu
    [    0.080574] ACPI: bus type PCI registered
    [    0.080581] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [    0.092329] PCI: PCI BIOS revision 2.10 entry at 0xfb1c0, last bus=1
    [    0.092335] PCI: Using configuration type 1 for base access
    [    0.093965] bio: create slab <bio-0> at 0
    [    0.094273] ACPI: Added _OSI(Module Device)
    [    0.094279] ACPI: Added _OSI(Processor Device)
    [    0.094282] ACPI: Added _OSI(3.0 _SCP Extensions)
    [    0.094286] ACPI: Added _OSI(Processor Aggregator Device)
    [    0.098161] ACPI: Interpreter enabled
    [    0.098184] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
    [    0.098193] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
    [    0.098216] ACPI: (supports S0 S3 S4 S5)
    [    0.098220] ACPI: Using IOAPIC for interrupt routing
    [    0.098299] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
    [    0.098438] ACPI: No dock devices found.
    [    0.108047] ACPI: \_PR_.CPU1: failed to get CPU APIC ID.
    [    0.108184] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [    0.108198] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
    [    0.108210] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
    [    0.108371] acpi PNP0A03:00: host bridge window [io  0x0000-0x047f] (ignored)
    [    0.108378] acpi PNP0A03:00: host bridge window [io  0x0490-0x0cf7] (ignored)
    [    0.108381] acpi PNP0A03:00: host bridge window [io  0x0d00-0x0fff] (ignored)
    [    0.108385] acpi PNP0A03:00: host bridge window [io  0x1100-0xffff] (ignored)
    [    0.108389] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
    [    0.108393] acpi PNP0A03:00: host bridge window [mem 0x20000000-0xfebfffff] (ignored)
    [    0.108397] PCI: root bus 00: using default resources
    [    0.108402] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
    [    0.108726] PCI host bridge to bus 0000:00
    [    0.108736] pci_bus 0000:00: root bus resource [bus 00-ff]
    [    0.108741] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
    [    0.108746] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
    [    0.108768] pci 0000:00:00.0: [1039:0648] type 00 class 0x060000
    [    0.108783] pci 0000:00:00.0: reg 0x10: [mem 0xd0000000-0xd7ffffff]
    [    0.109012] pci 0000:00:01.0: [1039:0003] type 01 class 0x060400
    [    0.109196] pci 0000:00:02.0: [1039:0008] type 00 class 0x060100
    [    0.109281] pci 0000:00:02.0: Enabling SiS 96x SMBus
    [    0.109447] pci 0000:00:02.1: [1039:0016] type 00 class 0x0c0500
    [    0.109507] pci 0000:00:02.1: reg 0x20: [io  0x1400-0x141f]
    [    0.109684] pci 0000:00:02.3: [1039:7007] type 00 class 0x0c0010
    [    0.109711] pci 0000:00:02.3: reg 0x10: [mem 0xeb000000-0xeb000fff]
    [    0.109771] pci 0000:00:02.3: reg 0x30: [mem 0x00000000-0x0001ffff pref]
    [    0.109811] pci 0000:00:02.3: supports D1 D2
    [    0.109815] pci 0000:00:02.3: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.110016] pci 0000:00:02.5: [1039:5513] type 00 class 0x010180
    [    0.110085] pci 0000:00:02.5: reg 0x20: [io  0xf000-0xf00f]
    [    0.110284] pci 0000:00:02.6: [1039:7013] type 00 class 0x070300
    [    0.110311] pci 0000:00:02.6: reg 0x10: [io  0xd000-0xd0ff]
    [    0.110325] pci 0000:00:02.6: reg 0x14: [io  0xd400-0xd47f]
    [    0.110410] pci 0000:00:02.6: supports D1 D2
    [    0.110414] pci 0000:00:02.6: PME# supported from D3hot D3cold
    [    0.110506] pci 0000:00:02.6: System wakeup disabled by ACPI
    [    0.110605] pci 0000:00:02.7: [1039:7012] type 00 class 0x040100
    [    0.110631] pci 0000:00:02.7: reg 0x10: [io  0xd800-0xd8ff]
    [    0.110645] pci 0000:00:02.7: reg 0x14: [io  0xdc00-0xdc7f]
    [    0.110730] pci 0000:00:02.7: supports D1 D2
    [    0.110734] pci 0000:00:02.7: PME# supported from D3hot D3cold
    [    0.110907] pci 0000:00:03.0: [1039:7001] type 00 class 0x0c0310
    [    0.110929] pci 0000:00:03.0: reg 0x10: [mem 0xeb001000-0xeb001fff]
    [    0.111078] pci 0000:00:03.0: System wakeup disabled by ACPI
    [    0.111177] pci 0000:00:03.1: [1039:7001] type 00 class 0x0c0310
    [    0.111199] pci 0000:00:03.1: reg 0x10: [mem 0xeb002000-0xeb002fff]
    [    0.111356] pci 0000:00:03.1: System wakeup disabled by ACPI
    [    0.111454] pci 0000:00:03.2: [1039:7001] type 00 class 0x0c0310
    [    0.111475] pci 0000:00:03.2: reg 0x10: [mem 0xeb003000-0xeb003fff]
    [    0.111623] pci 0000:00:03.2: System wakeup disabled by ACPI
    [    0.111734] pci 0000:00:03.3: [1039:7002] type 00 class 0x0c0320
    [    0.111760] pci 0000:00:03.3: reg 0x10: [mem 0xeb004000-0xeb004fff]
    [    0.111850] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
    [    0.112045] pci 0000:00:0f.0: [10ec:8139] type 00 class 0x020000
    [    0.112070] pci 0000:00:0f.0: reg 0x10: [io  0xe000-0xe0ff]
    [    0.112083] pci 0000:00:0f.0: reg 0x14: [mem 0xeb005000-0xeb0050ff]
    [    0.112169] pci 0000:00:0f.0: supports D1 D2
    [    0.112173] pci 0000:00:0f.0: PME# supported from D1 D2 D3hot D3cold
    [    0.112437] pci 0000:01:00.0: [1002:5964] type 00 class 0x030000
    [    0.112464] pci 0000:01:00.0: reg 0x10: [mem 0xd8000000-0xdfffffff pref]
    [    0.112476] pci 0000:01:00.0: reg 0x14: [io  0xc000-0xc0ff]
    [    0.112488] pci 0000:01:00.0: reg 0x18: [mem 0xe9000000-0xe900ffff]
    [    0.112521] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
    [    0.112565] pci 0000:01:00.0: supports D1 D2
    [    0.112661] pci 0000:01:00.1: [1002:5d44] type 00 class 0x038000
    [    0.112682] pci 0000:01:00.1: reg 0x10: [mem 0xe0000000-0xe7ffffff pref]
    [    0.112695] pci 0000:01:00.1: reg 0x14: [mem 0xe9010000-0xe901ffff]
    [    0.112764] pci 0000:01:00.1: supports D1 D2
    [    0.112888] pci 0000:00:01.0: PCI bridge to [bus 01]
    [    0.112896] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
    [    0.112904] pci 0000:00:01.0:   bridge window [mem 0xe8000000-0xe9ffffff]
    [    0.112910] pci 0000:00:01.0:   bridge window [mem 0xd8000000-0xe7ffffff pref]
    [    0.112924] pci_bus 0000:00: on NUMA node 0
    [    0.113106] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
    [    0.113252] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
    [    0.113436] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
    [    0.113579] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    [    0.113723] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
    [    0.113876] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
    [    0.114026] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
    [    0.114178] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
    [    0.114969] ACPI: Enabled 2 GPEs in block 00 to 0F
    [    0.115202] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [    0.115209] vgaarb: loaded
    [    0.115211] vgaarb: bridge control possible 0000:01:00.0
    [    0.115301] PCI: Using ACPI for IRQ routing
    [    0.115309] PCI: pci_cache_line_size set to 64 bytes
    [    0.115368] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
    [    0.115373] e820: reserve RAM buffer [mem 0x1fff0000-0x1fffffff]
    [    0.115616] NetLabel: Initializing
    [    0.115622] NetLabel:  domain hash size = 128
    [    0.115624] NetLabel:  protocols = UNLABELED CIPSOv4
    [    0.115655] NetLabel:  unlabeled traffic allowed by default
    [    0.115740] Switched to clocksource refined-jiffies
    [    0.129136] pnp: PnP ACPI init
    [    0.129177] ACPI: bus type PNP registered
    [    0.129597] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    [    0.130147] system 00:01: [io  0x04d0-0x04d1] has been reserved
    [    0.130157] system 00:01: [io  0x0290-0x029f] has been reserved
    [    0.130162] system 00:01: [io  0x0800-0x0805] has been reserved
    [    0.130170] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.130207] pnp 00:02: [dma 4]
    [    0.130277] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [    0.130404] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
    [    0.130503] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
    [    0.130621] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
    [    0.130910] pnp 00:06: [dma 2]
    [    0.131028] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
    [    0.131556] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
    [    0.132089] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
    [    0.132675] pnp 00:09: [dma 3]
    [    0.132810] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
    [    0.133009] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
    [    0.133074] pnp: PnP ACPI: found 11 devices
    [    0.133080] ACPI: bus type PNP unregistered
    [    0.174911] Switched to clocksource acpi_pm
    [    0.174951] pci 0000:00:02.3: BAR 6: assigned [mem 0x20000000-0x2001ffff pref]
    [    0.174962] pci 0000:01:00.0: BAR 6: assigned [mem 0xe8000000-0xe801ffff pref]
    [    0.174969] pci 0000:00:01.0: PCI bridge to [bus 01]
    [    0.174975] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
    [    0.174983] pci 0000:00:01.0:   bridge window [mem 0xe8000000-0xe9ffffff]
    [    0.174989] pci 0000:00:01.0:   bridge window [mem 0xd8000000-0xe7ffffff pref]
    [    0.174999] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
    [    0.175003] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
    [    0.175007] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
    [    0.175010] pci_bus 0000:01: resource 1 [mem 0xe8000000-0xe9ffffff]
    [    0.175013] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xe7ffffff pref]
    [    0.175076] NET: Registered protocol family 2
    [    0.175437] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
    [    0.175457] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
    [    0.175477] TCP: Hash tables configured (established 4096 bind 4096)
    [    0.175521] TCP: reno registered
    [    0.175531] UDP hash table entries: 256 (order: 1, 8192 bytes)
    [    0.175541] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    [    0.175688] NET: Registered protocol family 1
    [    0.397112] pci 0000:01:00.0: Boot video device
    [    0.397124] PCI: CLS 32 bytes, default 64
    [    0.397238] Unpacking initramfs...
    [    0.517648] Freeing initrd memory: 3204K (defe2000 - df303000)
    [    0.517809] apm: BIOS not found.
    [    0.517886] Scanning for low memory corruption every 60 seconds
    [    0.518572] futex hash table entries: 512 (order: 3, 32768 bytes)
    [    0.533762] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [    0.536896] zbud: loaded
    [    0.537090] VFS: Disk quotas dquot_6.5.2
    [    0.537200] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [    0.537623] msgmni has been set to 996
    [    0.537789] Key type big_key registered
    [    0.538268] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [    0.538390] io scheduler noop registered
    [    0.538397] io scheduler deadline registered
    [    0.538493] io scheduler cfq registered (default)
    [    0.538712] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [    0.538757] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [    0.538862] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
    [    0.538866] vesafb: scrolling: redraw
    [    0.538870] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
    [    0.539366] vesafb: framebuffer at 0xd8000000, mapped to 0xe0800000, using 5120k, total 5120k
    [    0.646493] Console: switching to colour frame buffer device 160x64
    [    0.753177] fb0: VESA VGA frame buffer device
    [    0.753268] GHES: HEST is not enabled!
    [    0.753308] isapnp: Scanning for PnP cards...
    [    1.066034] isapnp: No Plug & Play device found
    [    1.066191] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [    1.086839] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
    [    1.107535] 00:08: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
    [    1.108786] rtc_cmos 00:03: RTC can wake from S4
    [    1.109049] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    [    1.109090] rtc_cmos 00:03: alarms up to one year, 242 bytes nvram
    [    1.109177] ledtrig-cpu: registered to indicate activity on CPUs
    [    1.109384] TCP: cubic registered
    [    1.109696] NET: Registered protocol family 10
    [    1.110235] NET: Registered protocol family 17
    [    1.110539] Using IPI No-Shortcut mode
    [    1.110887] registered taskstats version 1
    [    1.111374]   Magic number: 14:861:337
    [    1.111396] tty tty58: hash matches
    [    1.111477] rtc_cmos 00:03: setting system clock to 2014-05-12 16:19:42 UTC (1399911582)
    [    1.111561] PM: Hibernation image not present or could not be loaded.
    [    1.112337] Freeing unused kernel memory: 568K (c160f000 - c169d000)
    [    1.112374] Write protecting the kernel text: 4448k
    [    1.112407] Write protecting the kernel read-only data: 1284k
    [    1.132515] random: systemd-tmpfile urandom read with 0 bits of entropy available
    [    1.140455] systemd-udevd[40]: starting version 212
    [    1.240350] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    [    1.240356] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
    [    1.240605] serio: i8042 KBD port at 0x60,0x64 irq 1
    [    1.249861] Floppy drive(s): fd0 is 1.44M
    [    1.263944] FDC 0 is a post-1991 82077
    [    1.295454] SCSI subsystem initialized
    [    1.312358] ACPI: bus type USB registered
    [    1.312456] usbcore: registered new interface driver usbfs
    [    1.312497] usbcore: registered new interface driver hub
    [    1.316781] usbcore: registered new device driver usb
    [    1.317900] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    1.318313] ehci-pci: EHCI PCI platform driver
    [    1.319280] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    1.319680] ohci-pci: OHCI PCI platform driver
    [    1.327015] libata version 3.00 loaded.
    [    1.363547] firewire_ohci 0000:00:02.3: added OHCI v1.0 device as card 0, 4 IR + 6 IT contexts, quirks 0x0
    [    1.364218] ehci-pci 0000:00:03.3: EHCI Host Controller
    [    1.364240] ehci-pci 0000:00:03.3: new USB bus registered, assigned bus number 1
    [    1.364332] ehci-pci 0000:00:03.3: irq 23, io mem 0xeb004000
    [    1.373423] ehci-pci 0000:00:03.3: USB 2.0 started, EHCI 1.00
    [    1.373943] hub 1-0:1.0: USB hub found
    [    1.373981] hub 1-0:1.0: 6 ports detected
    [    1.375001] ohci-pci 0000:00:03.0: OHCI PCI host controller
    [    1.375023] ohci-pci 0000:00:03.0: new USB bus registered, assigned bus number 2
    [    1.375100] ohci-pci 0000:00:03.0: irq 20, io mem 0xeb001000
    [    1.429251] hub 2-0:1.0: USB hub found
    [    1.429296] hub 2-0:1.0: 2 ports detected
    [    1.429636] pata_sis 0000:00:02.5: version 0.5.2
    [    1.429683] pata_sis 0000:00:02.5: SiS 962/963 MuTIOL IDE UDMA133 controller
    [    1.437030] scsi0 : pata_sis
    [    1.443413] scsi1 : pata_sis
    [    1.443626] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
    [    1.443633] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
    [    1.444146] ohci-pci 0000:00:03.1: OHCI PCI host controller
    [    1.444168] ohci-pci 0000:00:03.1: new USB bus registered, assigned bus number 3
    [    1.444242] ohci-pci 0000:00:03.1: irq 21, io mem 0xeb002000
    [    1.453047] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [    1.499191] hub 3-0:1.0: USB hub found
    [    1.499232] hub 3-0:1.0: 2 ports detected
    [    1.499756] ohci-pci 0000:00:03.2: OHCI PCI host controller
    [    1.499778] ohci-pci 0000:00:03.2: new USB bus registered, assigned bus number 4
    [    1.499856] ohci-pci 0000:00:03.2: irq 22, io mem 0xeb003000
    [    1.520042] tsc: Refined TSC clocksource calibration: 2625.851 MHz
    [    1.552850] hub 4-0:1.0: USB hub found
    [    1.552893] hub 4-0:1.0: 2 ports detected
    [    1.603787] ata1.00: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133
    [    1.603796] ata1.00: 160086528 sectors, multi 16: LBA
    [    1.617092] ata1.00: configured for UDMA/133
    [    1.617362] scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6Y080L0   YAR4 PQ: 0 ANSI: 5
    [    1.733392] usb 1-4: new high-speed USB device number 3 using ehci-pci
    [    1.861345] hub 1-4:1.0: USB hub found
    [    1.861759] hub 1-4:1.0: 4 ports detected
    [    1.863604] firewire_core 0000:00:02.3: created device fw0: GUID 00000d610024cc70, S400
    [    1.906938] ata2.00: ATAPI: HL-DT-STDVD-ROM GDR8162B, 0017, max UDMA/66
    [    1.906951] ata2.01: ATAPI: LITE-ON DVD+RW LDW-401S, E9S3, max UDMA/33
    [    1.920261] ata2.00: configured for UDMA/66
    [    1.933596] ata2.01: configured for UDMA/33
    [    1.942307] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVD-ROM GDR8162B 0017 PQ: 0 ANSI: 5
    [    1.943253] scsi 1:0:1:0: CD-ROM            LITE-ON  DVD+RW LDW-401S  E9S3 PQ: 0 ANSI: 5
    [    1.968652] sd 0:0:0:0: [sda] 160086528 512-byte logical blocks: (81.9 GB/76.3 GiB)
    [    1.968905] sd 0:0:0:0: [sda] Write Protect is off
    [    1.968913] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    1.969022] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    1.979035] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
    [    1.979044] cdrom: Uniform CD-ROM driver Revision: 3.20
    [    1.979566] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [    1.991510] sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
    [    1.991993] sr 1:0:1:0: Attached scsi CD-ROM sr1
    [    2.009048]  sda: sda1 sda2 sda3 < sda5 sda6 >
    [    2.010569] sd 0:0:0:0: [sda] Attached SCSI disk
    [    2.143550] usb 2-1: new low-speed USB device number 2 using ohci-pci
    [    2.345412] hidraw: raw HID events driver (C) Jiri Kosina
    [    2.358710] usbcore: registered new interface driver usbhid
    [    2.358717] usbhid: USB HID core driver
    [    2.361517] input: HID 04d9:048e as /devices/pci0000:00/0000:00:03.0/usb2/2-1/2-1:1.0/0003:04D9:048E.0001/input/input1
    [    2.361837] hid-generic 0003:04D9:048E.0001: input,hidraw0: USB HID v1.10 Mouse [HID 04d9:048e] on usb-0000:00:03.0-1/input0
    [    2.407135] usb 1-4.4: new high-speed USB device number 4 using ehci-pci
    [    2.500521] usb-storage 1-4.4:1.0: USB Mass Storage device detected
    [    2.500774] scsi2 : usb-storage 1-4.4:1.0
    [    2.502128] usbcore: registered new interface driver usb-storage
    [    2.520155] Switched to clocksource tsc
    [    3.175339] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
    [    3.505428] scsi 2:0:0:0: Direct-Access              USB DISK 2.0     PMAP PQ: 0 ANSI: 4
    [    3.507279] sd 2:0:0:0: [sdb] 15273600 512-byte logical blocks: (7.82 GB/7.28 GiB)
    [    3.508020] sd 2:0:0:0: [sdb] Write Protect is off
    [    3.508029] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
    [    3.508769] sd 2:0:0:0: [sdb] No Caching mode page found
    [    3.509434] sd 2:0:0:0: [sdb] Assuming drive cache: write through
    [    3.513361] random: nonblocking pool is initialized
    [    3.514387] sd 2:0:0:0: [sdb] No Caching mode page found
    [    3.515049] sd 2:0:0:0: [sdb] Assuming drive cache: write through
    [    3.517301]  sdb: sdb1 sdb2
    [    3.520401] sd 2:0:0:0: [sdb] No Caching mode page found
    [    3.521391] sd 2:0:0:0: [sdb] Assuming drive cache: write through
    [    3.522153] sd 2:0:0:0: [sdb] Attached SCSI removable disk
    [    3.928631] systemd[1]: systemd 212 running in system mode. (+PAM -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ +SECCOMP -APPARMOR)
    [    3.929099] systemd[1]: Detected architecture 'x86'.
    [    3.937340] systemd[1]: Set hostname to <archlinux-desktop>.
    [    5.174046] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
    [    5.175398] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [    5.175650] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [    5.175707] systemd[1]: Starting Remote File Systems.
    [    5.175758] systemd[1]: Reached target Remote File Systems.
    [    5.175820] systemd[1]: Starting Encrypted Volumes.
    [    5.175867] systemd[1]: Reached target Encrypted Volumes.
    [    5.175954] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [    5.176267] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [    5.176359] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [    5.176504] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [    5.176555] systemd[1]: Starting Swap.
    [    5.176602] systemd[1]: Reached target Swap.
    [    5.176652] systemd[1]: Expecting device dev-disk-by\x2duuid-4e223aa4\x2d3894\x2d41bc\x2db82c\x2d955ae89b3eb2.device...
    [    5.176796] systemd[1]: Expecting device dev-disk-by\x2duuid-b7ca07ac\x2d5ceb\x2d40d6\x2db55c\x2ded651e31f452.device...
    [    5.176850] systemd[1]: Starting Root Slice.
    [    5.208364] systemd[1]: Created slice Root Slice.
    [    5.208422] systemd[1]: Starting User and Session Slice.
    [    5.209187] systemd[1]: Created slice User and Session Slice.
    [    5.209244] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [    5.209403] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [    5.209451] systemd[1]: Starting Delayed Shutdown Socket.
    [    5.209585] systemd[1]: Listening on Delayed Shutdown Socket.
    [    5.209635] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [    5.209740] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [    5.209789] systemd[1]: Starting LVM2 metadata daemon socket.
    [    5.209917] systemd[1]: Listening on LVM2 metadata daemon socket.
    [    5.209982] systemd[1]: Starting udev Kernel Socket.
    [    5.210180] systemd[1]: Listening on udev Kernel Socket.
    [    5.210249] systemd[1]: Starting udev Control Socket.
    [    5.210366] systemd[1]: Listening on udev Control Socket.
    [    5.210428] systemd[1]: Starting Journal Socket.
    [    5.210621] systemd[1]: Listening on Journal Socket.
    [    5.210717] systemd[1]: Starting System Slice.
    [    5.211489] systemd[1]: Created slice System Slice.
    [    5.211583] systemd[1]: Started File System Check on Root Device.
    [    5.211623] systemd[1]: Starting system-systemd\x2dfsck.slice.
    [    5.212405] systemd[1]: Created slice system-systemd\x2dfsck.slice.
    [    5.212459] systemd[1]: Mounting Temporary Directory...
    [    5.239615] systemd[1]: Starting system-getty.slice.
    [    5.240697] systemd[1]: Created slice system-getty.slice.
    [    5.240838] systemd[1]: Mounting Debug File System...
    [    5.279740] systemd[1]: Started Load Kernel Modules.
    [    5.296122] systemd[1]: Starting Apply Kernel Variables...
    [    5.297870] systemd[1]: Starting Setup Virtual Console...
    [    5.299634] systemd[1]: Mounting POSIX Message Queue File System...
    [    5.301446] systemd[1]: Mounting Configuration File System...
    [    5.344473] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    [    5.346155] systemd[1]: Mounted FUSE Control File System.
    [    5.346271] systemd[1]: Mounting Huge Pages File System...
    [    5.370976] systemd[1]: Starting Set Up Additional Binary Formats...
    [    5.372655] systemd[1]: Starting udev Coldplug all Devices...
    [    5.374485] systemd[1]: Starting Journal Service...
    [    5.376393] systemd[1]: Started Journal Service.
    [    5.926924] systemd-udevd[120]: starting version 212
    [    6.249395] EXT4-fs (sda5): re-mounted. Opts: data=ordered
    [    7.438155] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
    [    7.438167] ACPI: Power Button [PWRB]
    [    7.438350] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [    7.438360] ACPI: Power Button [PWRF]
    [    7.585684] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [    7.625549] parport_pc 00:09: reported by Plug and Play ACPI
    [    7.625639] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
    [    7.658989] Linux agpgart interface v0.103
    [    7.722256] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x1400
    [    7.809304] [drm] Initialized drm 1.1.0 20060810
    [    7.958917] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
    [    7.958969] 8139cp 0000:00:0f.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
    [    7.980566] mousedev: PS/2 mouse device common for all mice
    [    7.980931] 8139too: 8139too Fast Ethernet driver 0.9.28
    [    7.984132] 8139too 0000:00:0f.0 eth0: RealTek RTL8139 at 0xe1724000, 00:0d:61:22:1d:3c, IRQ 16
    [    7.985877] agpgart-sis 0000:00:00.0: SiS chipset [1039/0648]
    [    8.016252] agpgart-sis 0000:00:00.0: AGP aperture is 128M @ 0xd0000000
    [    8.116064] input: PC Speaker as /devices/platform/pcspkr/input/input4
    [    8.251837] microcode: CPU0 sig=0xf29, pf=0x4, revision=0x11
    [    8.261786] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [    8.279526] [drm] radeon kernel modesetting enabled.
    [    8.279631] checking generic (d8000000 500000) vs hw (d8000000 8000000)
    [    8.279639] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
    [    8.279680] Console: switching to colour dummy device 80x25
    [    8.301981] [drm] initializing kernel modesetting (RV280 0x1002:0x5964 0x1458:0x4032).
    [    8.302015] [drm] register mmio base: 0xE9000000
    [    8.302018] [drm] register mmio size: 65536
    [    8.302188] agpgart-sis 0000:00:00.0: AGP 3.5 bridge
    [    8.302214] agpgart-sis 0000:00:00.0: putting AGP V3 device at 0000:00:00.0 into 8x mode
    [    8.302220] agpgart-sis 0000:00:00.0: SiS delay workaround: giving bridge time to recover
    [    8.313685] agpgart-sis 0000:00:00.0: putting AGP V3 device at 0000:01:00.0 into 8x mode
    [    8.313704] radeon 0000:01:00.0: GTT: 128M 0xD0000000 - 0xD7FFFFFF
    [    8.313711] [drm] Generation 2 PCI interface, using max accessible memory
    [    8.313718] radeon 0000:01:00.0: VRAM: 128M 0x00000000D8000000 - 0x00000000DFFFFFFF (128M used)
    [    8.313742] [drm] Detected VRAM RAM=128M, BAR=128M
    [    8.313746] [drm] RAM width 64bits DDR
    [    8.318743] [TTM] Zone  kernel: Available graphics memory: 255446 kiB
    [    8.318750] [TTM] Initializing pool allocator
    [    8.318762] [TTM] Initializing DMA pool allocator
    [    8.318815] [drm] radeon: 128M of VRAM memory ready
    [    8.318821] [drm] radeon: 128M of GTT memory ready.
    [    8.321257] radeon 0000:01:00.0: WB disabled
    [    8.321270] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000d0000000 and cpu addr 0xe07fe000
    [    8.321276] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [    8.321278] [drm] Driver supports precise vblank timestamp query.
    [    8.321311] [drm] radeon: irq initialized.
    [    8.321340] [drm] Loading R200 Microcode
    [    8.337126] ppdev: user-space parallel port driver
    [    8.350382] [drm] radeon: ring at 0x00000000D0001000
    [    8.350414] [drm] ring test succeeded in 1 usecs
    [    8.350728] [drm] ib test succeeded in 0 usecs
    [    8.351298] [drm] Radeon Display Connectors
    [    8.351305] [drm] Connector 0:
    [    8.351307] [drm]   VGA-1
    [    8.351311] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
    [    8.351313] [drm]   Encoders:
    [    8.351315] [drm]     CRT1: INTERNAL_DAC1
    [    8.351317] [drm] Connector 1:
    [    8.351319] [drm]   SVIDEO-1
    [    8.351321] [drm]   Encoders:
    [    8.351322] [drm]     TV1: INTERNAL_DAC2
    [    8.481905] [drm] fb mappable at 0xD8040000
    [    8.481912] [drm] vram apper at 0xD8000000
    [    8.481914] [drm] size 8294400
    [    8.481916] [drm] fb depth is 24
    [    8.481918] [drm]    pitch is 7680
    [    8.482299] fbcon: radeondrmfb (fb0) is primary device
    [    8.535240] Console: switching to colour frame buffer device 240x67
    [    8.614028] systemd-udevd[135]: renamed network interface eth0 to enp0s15
    [    8.614028] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
    [    8.614034] radeon 0000:01:00.0: registered panic notifier
    [    8.614052] [drm] Initialized radeon 2.37.0 20080528 for 0000:01:00.0 on minor 0
    [    9.523376] intel8x0_measure_ac97_clock: measured 52701 usecs (2535 samples)
    [    9.523383] intel8x0: clocking to 48000
    [   10.264223] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: data=ordered
    [   10.529887] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: data=ordered
    [   10.688972] systemd-journald[112]: Received request to flush runtime journal from PID 1
    [   11.588053] 8139too 0000:00:0f.0 enp0s15: link up, 100Mbps, full-duplex, lpa 0x45E1
    [  130.919975] ISO 9660 Extensions: RRIP_1991A
    [ 1052.318149] perf samples too long (2508 > 2500), lowering kernel.perf_event_max_sample_rate to 50100
    [ 2771.015182] systemd[1]: Starting Journal Service...
    [ 2773.625872] systemd-journald[112]: Received SIGTERM from PID 1 (systemd).
    [ 2773.907874] systemd[1]: Unit systemd-journald.service entered failed state.
    [ 2773.921616] systemd[1]: systemd-journald.service has no holdoff time, scheduling restart.
    [ 2773.922423] systemd[1]: Stopping Journal Service...
    [ 2773.922521] systemd[1]: Starting Journal Service...
    [ 2773.924633] systemd[1]: Started Journal Service.
    [ 2774.243766] systemd-journald[860]: Received request to flush runtime journal from PID 1
    [ 2848.068160] perf samples too long (5003 > 4990), lowering kernel.perf_event_max_sample_rate to 25200
    [ 2932.591054] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
    [ 2932.591064] Disabling lock debugging due to kernel taint
    [ 2932.632805] <6>[fglrx] Maximum main memory to use for locked dma buffers: 427 MBytes.
    [ 2932.633428] <3>[fglrx:firegl_init_device_list] *ERROR* No supported display adapters were found
    [ 2932.633438] <3>[fglrx:firegl_init_module] *ERROR* firegl_init_devices failed
    [ 3146.754229] <6>[fglrx] Maximum main memory to use for locked dma buffers: 427 MBytes.
    [ 3146.754491] <3>[fglrx:firegl_init_device_list] *ERROR* No supported display adapters were found
    [ 3146.754495] <3>[fglrx:firegl_init_module] *ERROR* firegl_init_devices failed
    [ 3387.964180] <6>[fglrx] Maximum main memory to use for locked dma buffers: 427 MBytes.
    [ 3387.964434] <3>[fglrx:firegl_init_device_list] *ERROR* No supported display adapters were found
    [ 3387.964440] <3>[fglrx:firegl_init_module] *ERROR* firegl_init_devices failed
    I have already seen this link and he explain that installing from AUR has resolved his problem, but the wiki says:
    The second method you can use is the AUR; PKGBUILDs offered here are also made by Vi0L0 and are the same he uses to built packages for his repository. Lastly, you can install the driver directly from AMD.
    My aim is to install Catalyst
    Thank you for your help

    I don't think that card is supported by AMD Catalyst anymore, even by the legacy branch...

  • Windows 8.1 doesn't hibernate or sleep after installing amd catalyst driver

    hi i am using windows 8.1 64 bit but after installing a amd catalyst center windows behaviour changed it doesn't go for hibernate and sleep and after unstall it windows comes into normal position please refered me proper solution to install amd driver wihout any issue and also suggest me which version will be compatible with my device i have tried amd 14.9 and also 14.11 but issues didn't solve i am curretnly using intel Version10.18.10.3325 windows update show me amd  wddi 1.3 driver but it always failed not installing..
    Hp pavilion-15 n037tx Notebook
    core i5 4200U
    4gb ram
    This question was solved.
    View Solution.

    Hi @Ahmed-Aslam 
    I understand that you are have problems with hibernate and sleep on your notebook.
    I would review the attached document. I realize from your post that you have tried some of the things listed, but just check it and see if anything there was missed, perhaps the section on malware issues.
    Troubleshooting sleep and hibernate issues in Windows 8
    You can also try using system restore to roll back to before the software update to see if that resolves the issue.
    Using Microsoft System Restore (Windows 8)
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • 7 year, 100+ PC Veteran Stumped ! Power, and performance issues. Full detail included.

    Good morning everyone! (At least it's morning in wonderful Pennsylvania USA!)
    AMD Athlon 64 3200+ (New Castle)
    Thermaltake Venus 12 CPU Cooler w/ Manual Adjust
    MSI "K8T Neo-FIS2R" K8T800
    512MB x 2 Corsair TWINX1024-3200C2PT (Rated 2-3-3-6 1T)
    Antec TruePower 430w PS (+5V@36A +3.3V@28A +12V@20A)
    Gainward Dual DVI w/ VIVO GeForce FX5700 Ultra
    2x Viewsonic 19" VX900 LCD Monitors
    Creative SoundBlaster Audigy Platinum eX
    Plextor 712a Black 12x+/8x- DVD-RW
    Lite-On SOHD-167T Black 16x DVD-ROM
    Western Digital WD740GD 74GB 10,000rpm Raptor SATA
    Western Digital WD2500JB 250GB 7,200rpm 8MB IDE
    Seagate Barracuda ST3200822AS 200GB 7,200rpm 8MB IDE
    Lian-Li PC-65B Black Aluminum Case
    Vantech PCI Slot Fan
    CyberPower 825va Voltage Regulating UPS
    Windows XP Professional SP1a
         There we have it, I think that that is all you need to know to perhaps give opinions and advice. Allow me to elaborate on why I am posting today after browsing this wonderful forum for the last two weeks. (...and by the way, my hat's off to some of you knowledgeable regulars for helping out a lot of newbies and folks in trouble!) Without further adieu:
    Problem #1: POWER ISSUE
    When, or if, I remove AC Power from my PC for whatever reason I run into a problem in which after reconnecting the AC Power and attempting to turn on the computer it goes into a 3-5 second startup loop in which the PC does not post, but rather cycles power to all of the components indefinitely. I notice the LEDs on my optical drives cycling repeatedly ad infinitum until I power off using the 4-second hold method, and then press the power button again. At this point the PC boots up fine, and boots up fine going forward from all restarts and shut downs. How strange? I've never, EVER, encountered something like this before.
    Problem #2: PERFORMANCE ISSUE
    This PC has a handful of serious performace issues.
    3dMark03 scored horribly.
    Prime95 runs ridiculously slow although there are no erros! It runs much more quickly on my work PC which is a PIII 866mhz with 384MB of PC133 RAM.
    I receive, on no regular frequency, or while doing anything in particular, Explorer memory errors. Not BSOD's mind you, but "...blah blah blah referenced memory address xxxxx-xxxxx and could not be written". This causes Explorer to restart itself, blowing away the start menu, task bar, and any Explorer windows open. They reappear, of course, without incident.
    The most off performance issue of all is that when opening an Explorer window for either of my IDE HDs, designated D and E drives, I find that when using the highlighting rectangle tool the Explorer window freezes or lags. I can double-click and open or move/copy files without incident, but if I attempt to highlight by this method this halt or lag occurs.
    Also, since my update of the BIOS from 1.2 to 1.7, and then to 1.8 system startup times prior to Windows loading are HORRID. I have disabled just about everything, and yet the SATA BIOS loads for 5 seconds, and then I must wait 20 seconds for Windows itself to come to the login screen. No other BIOS related issues to report per se, but this is terrible for what should be a blazingly fast computer.
    Now let's see.. what have I tried to do to repair the issues?
    1) 2 BIOS flashes. First from 1.2->1.7, and then from 1.7->1.8. Ostensibly this was just "because". The power user need to have the latest! I noticed the incorrect CPU temperature being reported, however.. This led to me buying this massive ThermalTake HSF to replace my stocker. I also added more thermal goop than I ever have before, as well as a PCI slot fan before I became aware that it was a BIOS issue! GRRRR MSI.
    2) I thought perhaps for the one issue that one of the hard drives was an issue, and even perhaps for power, but I replaced each with new drives and tested all 4 on another PC. NO problems. Also I should perhaps mention that my IDE drives are all hooked up using Antec Cobra cables. Expensive yes, but why the hell not, right? I've never seen a hang-off grounding wire for IDE before. Decided not to use them as I could think of a great place to screw them in, nor have other PC using them had trouble skipping the ground wire.
    3) I unplugged every molex cable, the 4-pin CPU power, and the 20-pin ATX power and rerranged them all - as well as removed and then reinserted the RAM.
    4) I tried changing my memory timings and power management settings, etc in BIOS. Nothing seem to impact the issue. I didn't fiddle with the voltages, but I should not need to running the RAM at SPD or lower settings and without overclocking the system at all!
    5) Another issue that I had that seems to have vanished, come back, vanished, and then come back a "little bit" is my USB ports. When set to enable legacy devices in BIOS my USB items like my Logitech wireless keyboard would just cycle power and refuse to function. Also my UPS connected VIA USB seems to sometimes handshake with Windows and sometimes not. I've tried using all of the different ports, etc but the problem remains. I NEED 6 ports for my devices so it is all that I could do!
    6) I have an Enermax 550w EG651P-VE(FMA) with 36 amps on each voltage rail on it's way, and it should arrive tomorrow. Despite all of the crap regarding power supplies that I see on this board I am not confident that it's the problem. That Antec PSU should be able to hold it's on with 20 amps on the +12v channel. C'mon now. I build a nearly identical system with the same power supply for a customer and he has no problems at all. He also has 3 HDs, same motherboard, etc.. the only difference is he has but one optical drive and a 2800+ rather than a 3200+. That power difference should be decimal nature in amps needed.
    ...oh and the sound card is in PCI slot 3, for those that remember the glory days of sound card IRQ issues that Creative was once notorious for... oh, and I disable the ethernet boot device, etc so my slow startups should not be related. My serial ATA drive is also on connection 1 of the VIA controller.. Promise can kiss my a**.
    Soooo.. Show me what a n00b I am, oh great ones. I've built over 100 PCs since 1998 for myself, friends, families, and customers... and I've never seen an issue like this one! I'm no dummy, but please don't assume too much. Other pros on here know full well you can forget the most simple mundane detail in spite of experience! I want to solve this problem. I am on the verge of shelling out for a new motherboard and processor of the 939 pin variety.. and am now wary of MSI's long awaited socket 939 K8 Neo2 board despite it's awesome reviews. MSI has never really given me trouble before.. but I don't really want to spend money to the order of $200+ for that damned Gigabyte board. Gigabyte has always been good to me as well. Save my wallet! PLEASE!!!
    Thanks so much everyone, I tried very hard not to leave out any details!
    Az (Ian)
    You can reach me on Yahoo or AIM just about any time, and I will check here frequently.

    Quote
    Originally posted by AzaghalSEI
    Good morning everyone! (At least it's morning in wonderful Pennsylvania USA!)
    AMD Athlon 64 3200+ (New Castle)
    Thermaltake Venus 12 CPU Cooler w/ Manual Adjust
    MSI "K8T Neo-FIS2R" K8T800
    512MB x 2 Corsair TWINX1024-3200C2PT (Rated 2-3-3-6 1T)
    Antec TruePower 430w PS (+5V@36A +3.3V@28A +12V@20A)
    Gainward Dual DVI w/ VIVO GeForce FX5700 Ultra
    2x Viewsonic 19" VX900 LCD Monitors
    Creative SoundBlaster Audigy Platinum eX
    Plextor 712a Black 12x+/8x- DVD-RW
    Lite-On SOHD-167T Black 16x DVD-ROM
    Western Digital WD740GD 74GB 10,000rpm Raptor SATA
    Western Digital WD2500JB 250GB 7,200rpm 8MB IDE
    Seagate Barracuda ST3200822AS 200GB 7,200rpm 8MB IDE
    Lian-Li PC-65B Black Aluminum Case
    Vantech PCI Slot Fan
    CyberPower 825va Voltage Regulating UPS
    Windows XP Professional SP1a
         There we have it, I think that that is all you need to know to perhaps give opinions and advice. Allow me to elaborate on why I am posting today after browsing this wonderful forum for the last two weeks. (...and by the way, my hat's off to some of you knowledgeable regulars for helping out a lot of newbies and folks in trouble!) Without further adieu:
    Problem #1: POWER ISSUE
    When, or if, I remove AC Power from my PC for whatever reason I run into a problem in which after reconnecting the AC Power and attempting to turn on the computer it goes into a 3-5 second startup loop in which the PC does not post, but rather cycles power to all of the components indefinitely. I notice the LEDs on my optical drives cycling repeatedly ad infinitum until I power off using the 4-second hold method, and then press the power button again. At this point the PC boots up fine, and boots up fine going forward from all restarts and shut downs. How strange? I've never, EVER, encountered something like this before.
    Problem #2: PERFORMANCE ISSUE
    This PC has a handful of serious performace issues.
    3dMark03 scored horribly.
    Prime95 runs ridiculously slow although there are no erros! It runs much more quickly on my work PC which is a PIII 866mhz with 384MB of PC133 RAM.
    I receive, on no regular frequency, or while doing anything in particular, Explorer memory errors. Not BSOD's mind you, but "...blah blah blah referenced memory address xxxxx-xxxxx and could not be written". This causes Explorer to restart itself, blowing away the start menu, task bar, and any Explorer windows open. They reappear, of course, without incident.
    The most off performance issue of all is that when opening an Explorer window for either of my IDE HDs, designated D and E drives, I find that when using the highlighting rectangle tool the Explorer window freezes or lags. I can double-click and open or move/copy files without incident, but if I attempt to highlight by this method this halt or lag occurs.
    Also, since my update of the BIOS from 1.2 to 1.7, and then to 1.8 system startup times prior to Windows loading are HORRID. I have disabled just about everything, and yet the SATA BIOS loads for 5 seconds, and then I must wait 20 seconds for Windows itself to come to the login screen. No other BIOS related issues to report per se, but this is terrible for what should be a blazingly fast computer.
    Now let's see.. what have I tried to do to repair the issues?
    1) 2 BIOS flashes. First from 1.2->1.7, and then from 1.7->1.8. Ostensibly this was just "because". The power user need to have the latest! I noticed the incorrect CPU temperature being reported, however.. This led to me buying this massive ThermalTake HSF to replace my stocker. I also added more thermal goop than I ever have before, as well as a PCI slot fan before I became aware that it was a BIOS issue! GRRRR MSI.
    2) I thought perhaps for the one issue that one of the hard drives was an issue, and even perhaps for power, but I replaced each with new drives and tested all 4 on another PC. NO problems. Also I should perhaps mention that my IDE drives are all hooked up using Antec Cobra cables. Expensive yes, but why the hell not, right? I've never seen a hang-off grounding wire for IDE before. Decided not to use them as I could think of a great place to screw them in, nor have other PC using them had trouble skipping the ground wire.
    3) I unplugged every molex cable, the 4-pin CPU power, and the 20-pin ATX power and rerranged them all - as well as removed and then reinserted the RAM.
    4) I tried changing my memory timings and power management settings, etc in BIOS. Nothing seem to impact the issue. I didn't fiddle with the voltages, but I should not need to running the RAM at SPD or lower settings and without overclocking the system at all!
    5) Another issue that I had that seems to have vanished, come back, vanished, and then come back a "little bit" is my USB ports. When set to enable legacy devices in BIOS my USB items like my Logitech wireless keyboard would just cycle power and refuse to function. Also my UPS connected VIA USB seems to sometimes handshake with Windows and sometimes not. I've tried using all of the different ports, etc but the problem remains. I NEED 6 ports for my devices so it is all that I could do!
    6) I have an Enermax 550w EG651P-VE(FMA) with 36 amps on each voltage rail on it's way, and it should arrive tomorrow. Despite all of the crap regarding power supplies that I see on this board I am not confident that it's the problem. That Antec PSU should be able to hold it's on with 20 amps on the +12v channel. C'mon now. I build a nearly identical system with the same power supply for a customer and he has no problems at all. He also has 3 HDs, same motherboard, etc.. the only difference is he has but one optical drive and a 2800+ rather than a 3200+. That power difference should be decimal nature in amps needed.
    ...oh and the sound card is in PCI slot 3, for those that remember the glory days of sound card IRQ issues that Creative was once notorious for... oh, and I disable the ethernet boot device, etc so my slow startups should not be related. My serial ATA drive is also on connection 1 of the VIA controller.. Promise can kiss my a**.
    Soooo.. Show me what a n00b I am, oh great ones. I've built over 100 PCs since 1998 for myself, friends, families, and customers... and I've never seen an issue like this one! I'm no dummy, but please don't assume too much. Other pros on here know full well you can forget the most simple mundane detail in spite of experience! I want to solve this problem. I am on the verge of shelling out for a new motherboard and processor of the 939 pin variety.. and am now wary of MSI's long awaited socket 939 K8 Neo2 board despite it's awesome reviews. MSI has never really given me trouble before.. but I don't really want to spend money to the order of $200+ for that damned Gigabyte board. Gigabyte has always been good to me as well. Save my wallet! PLEASE!!!
    Thanks so much everyone, I tried very hard not to leave out any details!
    Az (Ian)
    You can reach me on Yahoo or AIM just about any time, and I will check here frequently.
    The startup problem might just be a screwy psu. Your antec *should* be able to power your stuff just fine, but maybe it is defective in some strange way.
    What is your 3dmark03 score? If it is 3000-4000, (approx perf. level of ati 9600xt), then it is fine.
    Check your memory using memtest86+, and try underclocking it to ddr333.
    UNplug usb devices, and see if it speeds up boot. Also, I would not recommend bios 1.8 since people seem to have some troubles with it.
    Also, try disabling agp fast writes, disabling spread spectrum, and maybe boosting ram voltage a tiny bit.
    Try booting without your audigy plugged in, and try booting barebones (nothing but 1 hard drive with os) and see what happens.
    I'm no expert, but you might get lucky trying these steps.

  • Mac OS X Lion and Java7 + JavaFX2.1 performance issues

    Currently I'm using the JavaFX 2.1 GA Build with Mac OS X Lion (10.7.3) on my MacBook Pro (2.33 GHz Intel Core 2 Duo, 4GB 667 MHz DDR2 SDRAM, ATI Radeon X1600 256 MB) an run into some performance and ui problems. The overall rendering framerate is arround ~30fps (which is normally 60fps on my desktop computer) and if I try to resize the main window the window starts to flicker and I get the following exception:
    Glass detected outstanding Java exception at -[GlassRunnable run]:src/com/sun/mat/ui/GlassApplication.m:163
    Exception in thread "AWT-AppKit" java.lang.NullPointerException
    at com.sun.glass.ui.mac.MacView._uploadPixels(MacView.java:72)
    at com.sun.glass.ui.View.uploadPixels(View.java:706)
    at com.sun.prism.j2d.J2DPresentable$Glass$1.run(J2DPresentable.java:99)So, how can I avoid the flickering and the performance drop? Any suggestions?

    2.1 system requirements =>
    http://docs.oracle.com/javafx/2/system_requirements_2-1/jfxpub-system_requirements_2-1.htm
    For JavaFX applications to take advantage of the new hardware acceleration pipeline provided by JavaFX, your system must feature one of a wide range of GPUs currently available in the market. Table 1 lists the graphics cards that have been tested with JavaFX. If your system does not support hardware acceleration, then JavaFX uses the Java2D software pipeline.
    For Mac OS X, the following standard Apple hardware graphics chips provide the required support:
    - Intel HD Graphics 3000 processor with 288MB of DDR3 SDRAM shared with main memory
    - AMD Radeon HD 6630M graphics processor with 256MB of GDDR5 memoryYour graphics card is not on that list, so JavaFX is falling back to a software pipeline, which does not work that well for you. You may not be able to resolve some performance issues when using a software pipline. You can log an issue at http://javafx-jira.kenai.com to request the NullPointerException be fixed - as that should not occur in any case and is a bug.

  • AMD catalyst

    Hi there
    I use amd catalyst propietary driver, performance is ok, but there are textures blinking using wine
    you may few examples:
    example, example, example
    I've tried catalyst-total-pxp and catalyst-test-pxp, both of them show the same result:
    Last edited by amenzhisnky (2014-01-15 19:45:09)

    shadow82 wrote:In catalyst control center tear free option is enabled?
    There's no this option there, I think that's because of hybrid graphics.
    Last edited by amenzhisnky (2014-01-16 14:09:04)

  • AMD Catalyst with Linux Mint

    Dear all,
    I ahve a Lenovo G10 laptop, which has an AMD RADEON R5 M230 graphic card. I have downloaded the linux drivers  AMD Catalyst for my OS (Linux mint 17.1) from their site but when I start the installation process said that "hardware doesnt support the drivers". If anyone has a solution let me know

    It's up to you to decide wheter it's enough or not ! If it works for you...
    As mentioned above you can use vgaswitcheroo to verify. For this you need to enable _early_ KMS. (Forgot the _early_ in above post.)
    What would be the advantage?
    Please learn to use the wiki etc. for your own research before asking! https://wiki.archlinux.org/index.php/ke … de_setting
    Don't forget to mark the thread solved, when this issue is resolved.[1]
    Regards
    [1] Edit: I meant the basic issue from your title. The thing is, I think, we try to have one issue per thread. Feel free to open another thread, when another problem/question arises (Of course after searching and trying hard to solve it by yourself first ).
    Last edited by rebootl (2014-03-10 19:48:38)

  • Performance issues using JavaFX on different notebooks

    Hello,
    unfortunately i feel forced to ask a question about performance issues. As far as i understood, most of the problems with JavaFX 2.0 that are discussed here or somewhere else seem to have there roots in a huge count of nodes and/or some kind of animations. In opposition to this I'm writing a business application for the desktop with JavaFX as a Swing-replacement. There are no permanent animations at all and the scene has all in all 200 nodes(measured it with ScenicView) yet. I use no WebView-Nodes.
    The application runs very well on my development computer with 16 GB of RAM, a Intel Corei7 2600K processor and a mid-class AMD grafics device. Also, there are no performance issues on a Core i3 Notebook. As soon as i start the application on my Thinkpad X220 with Core i7-2620M CPU, 8 GB RAM and Intel HD graphics it get's almost unusable. For example, there is a diagramm(see attached screenshot), which is situated in a scrollpane. As soon as i try to pan it, the panning extremely slow(i'd say 2-4 fps). Another example is that hovering buttons is not very responsive. Moving the mouse over a button causes the hover effect 0.3-0.5 seconds after it entered the button. Fading transitions that i use at some places are not smooth as well.
    I made sure that the app is running using a hardware renderer on each computer. Also, i tried to force a fallback to the software renderer using the "-Dprism.order=j2d" switch but it only performed worse.
    So my first question is: Are there known issues with mobile processors/graphic devices of the mentioned type?

    I just tested it with Java 8 ea build 61 and beside the fact that a small amount of css didn't work anymore, it runs very well with this version of Java(/FX). Damn...i hope that some of this performance fixes will be backported to some Java 7 update.

  • FFMPEG screencast is not working for WoW under Wine (AMD Catalyst)

    Hi all. I'm trying to record game video using ffmpeg, but each time when I actually switch my focus to the game window, the picture freezes. Here is the example: http://www.youtube.com/watch?v=r4kfKpgcTAE This is World of Warcraft running under wine. I use AMD Catalyst beta-driver from the unofficial repository (mentioned here) on x64 system (lib32-catalyst-utils also installed).
    I tried this:
    ffmpeg -f x11grab -r 30 -i :0.0 -f alsa -i hw:0,0 -acodec flac -vcodec ffvhuff test.mkv (from wiki)
    and some variations I found over the Internet:
    ffmpeg -f x11grab -r 30 -i :0.0 -f alsa -i hw:0,0 -acodec flac -vcodec ffvhuff test.mkv
    None of them worked.
    I guess it's due to driver, because when I tried recordMyDesktop tool a few days ago with xf86-video-ati driver it recorded wideo. But when I switched to proprietary drider, both ffmpeg and recordMyDesktop are not working. I'm not going to change video driver because it's performance in video-games, so I'm wondering if there is any solution to my problem (except windowed-mode!).
    Thanks.
    Last edited by ghostwolf (2013-07-19 05:02:16)

    Hi,
    I had similar problems when trying to record OpenGL games with FFMpeg CLI. I use the catalyst-test drivers for my AMD HD 6870.
    You could try downloading SimpleScreenRecorder via yaourt; get both, including the lib32-simplescreenrecorder.
    There will be some conflicts, but choosing to replace some files hasn't caused any problems.
    Make sure you have both  lib32-libpulse and lib32-alsa-plugins installed (pacman).
    Once everything is in set, open SSR (SimpleScreenRecorder); set audio input to:
    - Record Microphone
    - Backend: PulseAudio
    - Source: Monitor of Built-in Audio Analog Stereo
    I chose to output as MKV ; H.264 ; MP3 @128
    Select Start Recording and fire up WoW. I was able to playback the game-play video (full screen 1920x1080) with audio.
    You may need different settings from what I have, notably the audio, but it should record in full screen mode.
    Good luck !

  • Satellite L850 PSKACA: Win 8 AMD Catalyst Manager & Control Center instal

    Satellite L850 PSKACA-03S011
    Hi There
    After installing Windows8 pro upgrade I have the following issue and not sure how to fix this
    Was said I had to reinstall in windows 8
    AMD CATALYST INSTALL MANAGER & ATI CATALYST CONTROL CENTRE
    I need the info how to install these drivers AND LINK TO THE CORRECT DRIVERS TO DOWNLOAD
    Please if someone can help
    Tks Gill

    Hmm it seems that just few Win 8 drivers are released for this unit.
    Ive got another idea.
    Win 8 supports and provides an own repair and fix options.
    Here an useful and interesting information:
    +Windows 8 Recovery & Repair+
    http://aps2.toshiba-tro.de/kb0/TSB2A03ES0000R01.htm
    There are different ways to recover or repair a PC which are:
    1. Refresh
    2. Reset
    3. Recovering using a recovery media
    4. System Image Recovery
    5. System Restore
    6. Automatic Repair
    7. Command Line
    I would recommend trying the first option called *Refresh:*
    The "Refresh" option is primarily a repair method. It is a great method of returning your PC to a known good state while preserving your files and a great deal of your configuration. With the "Refresh your PC" option, user accounts, data files, and some settings are preserved on your PC without the need to create a backup, or make choices about what to keep or remove

  • Webi Performance Issues on XI 4.0

    Hello,
    We're running XI 4.0 on a VM (Windows 2008 R2) and have serious performance issues opening Webi reports. The java Query Panel takes 30-40 seconds to open. Reports take 15 seconds to open. The same reports displayed no issues whatsoever on XI 3.1 SP 3 FP 3.5.
    Could any of the following be the cause?
    1. Running it on a VM (VMWare 4.5)
    2. Using NAS for FRS?
    Also, would it help at all if we were to install the CMS db on the BO server itself ? tnsping to Oracle for the CMS db returns in 0ms right now.
    The environment we use is:
    Dual Quad-core running at AMD Opetron 2.3Ghz with 32 GB of RAM on 3 servers.
    Server 1: BOE full stack
    Server 2: BOE full stack
    Server 3: Explorer
    BO XI 4.0 (build 565)
    Windows 2008 R2 on VM
    Oracle 11G 64 bit.
    Tomcat 6
    Java 1.6.29
    I'd appreciate any help at all.
    Thank you,
    Srinivas

    Hi Dennis,
    Thanks for sharing the document it was really helpfull in understanding the new concepts.
    Tried tracing network did not find any latency. As we have whole application deployed on tomcat can we deploy the static content to apache or else should we redeploy to tomcat again. My other question is if we deployed in split mode will there be any performance improvement in webi applet load time, is there a way to load java from local machine. In our environment webi applet load time is taking more than two mins. we want to reduce the load time. Upon a friends suggestion we started experimenting on diffrent browsers and found that IE9 was giving approximately the same performance as 3.1, on report opening, the java load is still slow. So is there a way to improve applet load times.
    Thanks
    Reddy
    Edited by: reddygk on Feb 28, 2012 3:25 PM

Maybe you are looking for