AMD CPU with Vista cannot connect to WLAN using MS-PEAP with WEP-128

We have a notebook "HP Pavilion tx1000 (AMD Turion64 CPU with Vista 32bits)". The notebook is using Broadcom 802.11a/b/g chipset, running AMD and Vista. It cannot associate to WLAN using MS-PEAP and WEP-128. Also, it cannot associate to PEAP and WPA2-AES.
The AP's log shows:
Oct 11 15:35:20 CCT: %DOT11-7-AUTH_FAILED: Station xxxx.xxx.xxxx Authentication failed
The ACS's log shows:
"EAP-TLS or PEAP authentication failed during SSL handshake"
We do not validate the certificate in the wireless setup. Vista's WLAN AutoConfig is used to configure the wireless profile. We are running Autonomous AP with Switch-Based WDS (WLSM).
We have no issue with Intel Centrino on the above authentication and encryption scheme.
Have checked the CCX program, broadcom 802.11a/b/g chipset is supported only for windows 2000 and xp. There is no mentioning about support for vista. Could this be a compatibility issue?
Please advise and thks

Maybe look at this post: http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Wireless%20-%20Mobility&topic=WLAN%20Radio%20Standards&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddf9be9/5#selected_message

Similar Messages

Satellite A500-03P: Cannot connect to WLan using Win 7 + Event message

Hi all,
I very recently bought the Satellite A500 with the included offer of Windows7 when it was available end October 09.
So I got the DVD from Toshibe for the upgrade and followed the steps and upgraded from Visa home premium to Windows 7. I have two issues now.
1) I am getting a System Event Notification after start up, telling me about the system event log. The full message is below.
Failed to connect to a windows service
Windows could not connect to the System Event Notification Service service. This problem prevents limited users from logging on to the system. As an administrative user, you can review the System Event Log for details about why the service didn't respond
2) I was able to use this laptop for the internet PRIOR to the upgrade, both via a wireless USB drive as well at office via a modem ADSL.
Now I cannot access the internet after the Windows 7 upgarde!!
As an example the Optus dial up pop up box appears andwhen I click "connect" it does not connect.
Can anyone help please??
Thanks
C I

Hey buddy,
1)Have you checked the Service Configuration for this service? The start up type of System Event Notification Service must be always set to Automatic. This service is absolutely necessary for Windows and shouldnt be disabled or set to manual start type.
Check this!
2)To be honest I never heard about internet PRIOR but normally it should also be possible to access the Internet with Windows 7.
Make sure that the WLAN and/or LAN card is installed properly and check the TCP/IP settings. If you are missing some driver you can get it on the Toshiba page.

TV System Update hangs at 21% with message "Cannot connect to proxy server"

Hi,
just installed TVSU (latest version) on my Thinkpad T40 (with WinXP Pro SP3, German). Installs fine, runs perfect after reboot, recognises the correct model, initiates search for updates and then stops at 21% whilst displaying
"Downloading Packet Information: Lenovo Help Center (1 of 1)".
A few seconds later the error message
"Cannot connect to Proxy Server"
comes up with an OK-Box. Clicking OK terminates the entire update process, however TVSU continues to run properly and the process can be restarted with the identical result. This happens with Kaspersky Firewall on and off, no difference. Even rebooting the system w/o firewall and virus protection and starting afresh does not help either. Tried perhaps 15 times over the last 4 hours with same results. I assume that the error message refers to a proxy at Lenovo since in my local environment there is no proxy involved. The system is known to be free of viruses (clean installation yesterday and virus checked this morning).
Note:
The display/error message above were translated from German into English so the corresponding original English displays/messages may look slightly different.
Any ideas?
Regards from Germany...

I have discovered one other potential cause of this behaviour.
If your computer is attached to a Domain, ensure you are connected to the Domain using a profile that has administrator rights when attempting these upgrades.
I was using a local profile with administrative rights, on a network connection that was outside of the corporate LAN, and I was getting the "Cannot connect to proxy server" error.
When I connected to our Corporate LAN and logged on to the machine with an administrative profile, the Proxy Server error went away, and I was then able to connect and download my required updates.
Just an FYI if you are doing this inside a large, firewalled LAN running from Active Directory.

PI 7.11: Cannot connect to server using message server:...

Hello Guys,
we make the Application Management for a Customer PI System.
Scenario:
- the SAP Gui Connection to the ABAP Stack is routed via SAPRouter and Works fine.
SAP Gui -> our SAP Router -> VPN Box from Customer -> Firewall Customer -> ABAP Stack PI System
- WebAccess its working fine, the Customer use Webdispatcher on every PI Server...
Browser -> VPN Box from Customer -> Firewall Customer -> Java Stack (Port: 5xx00 btw. 81xx (Webdispatcher))
Problem:
Our Problem ist, we can not proceed the Integration Builder or the ESB, the Java Web Start works fine and open the Logon Screen Correctly -> but i fill the Logon Screen with my User name and Password and press Logon come the follwing Error:
"Cannot connect to server using message server: ms://<hostname>.<domain>:8134/P4"
In the Details from the Error Message:
"<hostname>.<domain>:53404 Reason: com.sap.engine.services.rmi_p4.P4IOException:
Cannot open connection to host: <IP-Adress of Central Instance> and Port: 53404"
The Customer says, the Firewall is open with the IP Adresses and P4 Port but i dont think so...
Can everybody help me, or have tips for me! I have checked a lot of OSS Messages (PI High Availabilty etc... its all correct on the System)
Sorry for my bad English
Best Regards,
Markus

Hi Markus,
did you check if the browser is using a proxy? (In this case your scenario unfortunately won't work).
P4-port should generally be routed via a proxy (described in the help.sap.com), but within the PI-Tools(JNLP) the proxy-usage is not implemented. There is even a SAP-note that describes how to check the JavaWebStart-Proxyconfiguration, but this won't help either.
If there is a proxy defined in the browser everything is working fine till you pass the logon-screen but even with the correct "javaws"-settings you won't be able to go on.
(This problem is pretty bad if you do have developers and the SAP-servers seperated because of security issues. I'm hoping that this malfunction will be solved with upcoming patches.)
Solution: Establish a connection without any proxy in between.
E.g.: a terminal server in the same network
It would be helpful to find more people with the same problem to force a fix from SAP for that.
If anyone else is having problems with this, please add a comment to this thread.
Best regards
Christian

Cannot connect to server using message server: ms://xiidhasoft:50004/P4

Hi SAP Guru's
When PISUPER or any any of the enduser is trying to login in the Integration Builder , they are getting error
Cannot connect to server using message server: ms://xiidhasoft:50004/P4
I have tryed to search in SDN and got below solution but no success
1. Exchange Profile of PI - http://host:port/exchangeProfile
2. Check with the rmi port number.
3. if rmi port number is empty or any number is present ( check with Tr code: SMICM - services - check for p4 port number - it will be ex: 5<nr>04)
4. fill the rmi port number as present in the P4.
OR
implement note 864268
I have Netweaver PI 7.1 .
Please suggest some alternative solution.
Thanks & Regards
Vinay Patel

You may check your local PC Java Network Setting.
Troubleshooting:
Probably Javau2122 WebStart does not detect the correct Proxy Settings. In this case please proceed as follows:
To change the Proxy Settings for Javau2122 Web Start:
1. Click Start --> Run and enter javaws. Press button OK.
2. Control Panel -> Programs ->Java -> Network Settings...
3. Select Direct Connection to switch off the proxy settings and press button OK.
If this still does not work, select Use proxy server to set manually the HTTP Proxy and Port.
Contact your network administrator for the correct settings.

HT5704 after updating to ios 6.1.3 seems my factory unlocked 3gs is not working, i cant even restore..the message displayed is "itunes software update server cannot be contacted" 'm using latest itunes with winows xp system...........please please help me

after updating to ios 6.1.3 seems my factory unlocked 3gs is not working, i cant even restore..the message displayed is "itunes software update server cannot be contacted" 'm using latest itunes with winows xp system...........please please help me

There is no such thing as a "Factory Unlocked iPhone "
They are either locked to a carrier who may at some stage offer unlocking
or sold direct to a user by Apple (from their own Stores or online .)
Those iPhones are NOT locked
Where did you get your iPhone
If from Apple try this
http://support.apple.com/kb/HT1808

Connect to wlan using eaptls

I prepared a configuration profile in ICU for authentication of my MAC in WLAN using EAP TLS with certificate. On MAC (Lion and Mountain Lion)
it works well. I applied the same profile to my iPhone (iOS 6.1.3) and Iphone does not join WLAN. On debug console I found
Jul 19 16:06:35 iPhone-JK eapolclient[14972] <Error>: Jul 19 16:06:35 SecTrustEvaluate [leaf ValidLeaf]
Jul 19 16:06:35 iPhone-JK eapolclient[14972] <Notice>: eaptls_handshake: SSLHandshake failed, errSSLPeerAccessDenied
Jul 19 16:06:35 iPhone-JK eapolclient[14972] <Notice>: en0 TLS: authentication failed with status 1001
Jul 19 16:06:35 iPhone-JK eapolclient[14972] <Notice>: en0 STOP
Jul 19 16:06:35 iPhone-JK wifid[14] <Error>: WiFi:[395935595.372837]: Failed to associate with AC: -369032215
Have anyone idea what should be a difference between ICU profile for MAC and iPhone/
Jerk55

Difference found A personal certificate in profile has expired while on Mac was renew.

Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

Some progess I see. To be honest, i would not waste your time with trying to connect using wireless.
You are likely to get poor connections and dropping out.
If its working using a cable, then there is no need to bother with giving me the network settings, bu see how it goes, because sometimes giving the TV a static IP address can give better results.
There is an example of a couple of powerline adapters on the diagram below. Just ignore the network switch unless you want to connect other devices which are near to the TV.
http://forumhelp.dyndns.info/networking/powerline3.jpg
I will monitor the subject line of this thread, should you want to post any more information.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Since a I have intalled OS X Lion I cannot connect internet mobile using my ZTE mobile pen

Since a I have intalled OS X Lion I cannot connect internet mobile using my ZTE mobile pen.

It sounds like you need updated drivers. They are hard to find for that thing. This is what I found on a cursory search:
http://studiofourfour.zendesk.com/entries/20305042-mac-os-x-lion-3-zte-usb-broad band-drivers
You should consider contacting the manufacturer or cell provider that sold you the modem for support.

I've tried to purchase Mountain Lion but when I click 'buy' I get the message, "We could not complete your purchase. OS X Mountain Lion is not compatible with this computer." I'm using an iMac with Lion OS on it, Why is it incompatible?

I've tried to purchase Mountain Lion but when I click 'buy' I get the message, "We could not complete your purchase. OS X Mountain Lion is not compatible with this computer." I'm using an iMac with Lion OS on it, Why is it incompatible?

Your Mac must be one of the following models:
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009)
From here > Apple - Upgrade your Mac to OS X Mountain Lion.

Satellite Pro M70: Cannot connect to WLan with ConfigFree

Hi in Forum.
I'm having trouble with a Satelite Pro M70, concerning gaining control of wireless conections.
When scanning with "The Radar" i ConfigFree for available wireless accesspoints, I get several points available, but is not able to connect to a single one of them. I can read their status and see their WEP encryption marker.
When I try to connect to any one of them, I get a pop up dialog box, which says (translated from danish) "Another suppliers software is in control of the wireless adapter". When trying to set up a connection through the classic windows way, windows states that "windows is not able to configure this wireless connection - if you have another program to administrate wireless connections you must use this". I suppose it refers to ConfigFree...?
Is the unnamed "other supplier" Windows related or maybe McAfee related (Security Suite 2007)?
If you're familiar with this problem or something like it I would be please to know.
By the way - where do I enter WEP encryption keys for my friends WLAN routers in ConfigFree?

> When trying to set up a connection through the classic windows way, windows states that "windows is not able to configure this wireless connection - if you have another program to administrate wireless connections you must use this". I suppose it refers to ConfigFree...?
It must be not a ConfigFree. Depending on you WLan card an Intel ProSet utility or a Atheros Client utility could controls the Wlan configuration!
Please check if one of the both tools controls the wlan and disable the function!
> where do I enter WEP encryption keys for my friends WLAN routers in ConfigFree
You should have three different tabs in the Configfree utility.
The second one Device settigns provides device list and there you should find Wireless network connection.
Choose it and use the button Network connections.
There you should find some encryption settings!
Please check also the Profile settings tab and the option called Security settings

Please, help me with the ''Cannot connect to iTunes store'' problem

The same common problem can't be fixed .. I tried every possible solution, none of them worked.I tried changing date and time, reset network settings.None of them worked with me
Please help me to solve this problem

Saw this on another post.
Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it! It's not happening to everyone however but they are looking into it, its really hit or miss.
In the meantime ...........
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
 Cheers, Tom

Cannot connect to wlan eap-peap athentication fail...

Hi all
I have A nokia N97 which I tried to connect to my work WLAN but I get eap-peap athentication failed. We do user a certificate which I have installed on the phone but it does not connect. It does not even promt for user name or password. I can connect to my home wireless which just ask for a security key which i enter and it works please please help.
Please help

I got it working please read my How to
/t5/Connectivity/How-to-connect-to-wlan-with-n97-using-ca-certificate/td-p/659372

Grid installtion failing with error Cannot connect to Node Manager. : Conf

I am trying to install Grid, however its failing with following error
I installed Weblogic server 10.3.4 and 11g R2 database
==============================================================
Code of Exception: Error occured while performing nmConnect : Cannot connect to Node Manager. : Configuration error while reading domain directory
Use dumpStack() to view the full stacktrace
Thu Mar 03 21:49:03 IST 2011
<traceback object at 1>
Connecting to Node Manager ...
This Exception occurred at Thu Mar 03 21:49:03 IST 2011.
Thu Mar 03 21:49:03 IST 2011
SEVERE: Exception: during stop of admin server
Thu Mar 03 21:49:03 IST 2011
Name of Exception: main.WLSTException
Thu Mar 03 21:49:03 IST 2011
Code of Exception: Error occured while performing nmConnect : Cannot connect to Node Manager. : Configuration error while reading domain directory
Use dumpStack() to view the full stacktrace
Thu Mar 03 21:49:03 IST 2011
<traceback object at 2>
Connecting to Node Manager ...
This Exception occurred at Thu Mar 03 21:49:03 IST 2011.
Thu Mar 03 21:49:03 IST 2011
Node Manager is not running
Mar 3, 2011 9:49:03 PM oracle.sysman.omsca.util.CoreOMSConfigAssistantUtil execCommand
INFO: error messages of the command :
weblogic.nodemanager.NMException: Configuration error while reading domain directory
at weblogic.nodemanager.client.NMServerClient.checkResponse(NMServerClient.java:301)
at weblogic.nodemanager.client.NMServerClient.checkResponse(NMServerClient.java:314)
at weblogic.nodemanager.client.NMServerClient.connect(NMServerClient.java:249)
at weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerClient.java:200)
at weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerClient.java:206)
at weblogic.nodemanager.client.NMServerClient.getVersion(NMServerClient.java:53)
at weblogic.management.scripting.NodeManagerService.verifyConnection(NodeManagerService.java:179)
at weblogic.management.scripting.NodeManagerService.nmConnect(NodeManagerService.java:173)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.python.core.PyReflectedFunction.__call__(Unknown Source)
at org.python.core.PyMethod.__call__(Unknown Source)
at org.python.core.PyObject.__call__(Unknown Source)
at org.python.core.PyObject.invoke(Unknown Source)
at org.python.pycode._pyx2.nmConnect$3(<iostream>:118)
at org.python.pycode._pyx2.call_function(<iostream>)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyFunction.__call__(Unknown Source)
at org.python.core.PyObject.__call__(Unknown Source)
at org.python.pycode._pyx41.stopManagedServer$6(/u02/oracle/Oracle/Middleware/oms11g/sysman/omsca/scripts/wls/start_server.py:142)
at org.python.pycode._pyx41.call_function(/u02/oracle/Oracle/Middleware/oms11g/sysman/omsca/scripts/wls/start_server.py)
at org.python.core.PyTableCode.call(Unknown Source)

I am still getting error, even after installing Weblogic server 10.3.2
ar 4, 2011 10:44:42 AM oracle.sysman.omsca.util.CoreOMSConfigAssistantUtil execCommand
INFO: error messages of the command :
weblogic.nodemanager.NMConnectException: Connection refused. Could not connect to NodeManager. Check that it is running at node1.slksoft.com:7,403.
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
at java.net.Socket.connect(Socket.java:525)
at weblogic.nodemanager.client.SSLClient.createSocket(SSLClient.java:38)
at weblogic.nodemanager.client.NMServerClient.connect(NMServerClient.java:227)
at weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerClient.java:199)
at weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerClient.java:205)
at weblogic.nodemanager.client.NMServerClient.getVersion(NMServerClient.java:52)
at weblogic.management.scripting.NodeManagerService.verifyConnection(NodeManagerService.java:175)
at weblogic.management.scripting.NodeManagerService.nmConnect(NodeManagerService.java:168)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.python.core.PyReflectedFunction.__call__(Unknown Source)
at org.python.core.PyMethod.__call__(Unknown Source)
at org.python.core.PyObject.__call__(Unknown Source)
at org.python.core.PyObject.invoke(Unknown Source)
and also i am getting below error.
oracle@node1 grid]$ export ORACLE_SID=prod
[oracle@node1 grid]$ emctl status agent
EM Configuration issue. /u01/oracle/product/11.2.0/db_1/node1.soft.com_prod not found.
[oracle@node1 grid]$

Cannot connect to Mac 10.8.4 with Edge Inspect

I have Edge Inspect CC installed on my Computer, in Chrome and on my iPHone. I am signed in to Inspect according to the icon in the menu bar. My phone can see my Computer but cannot connect using the IP address. The Chrome Extension however says to "please start Edge Inspect" and I am not seeing the Edge icon in the Dock. So I think the thing is not activating... I seem to have the latest CC install, but I don't see a way to uninstall with the app manager and resinstall...
BTW, I don't know how or which type of port to open or find out if access is available on in Airport. I'm on a local network. The computer is connected by ethernet to the router, the phone is connected via WiFi to the network, and I've turned of NetBarrier... .

Netstat does not show anyone trying to use that port.
Here is the Console message in CHrome
Uncaught SyntaxError: Unexpected token u background.html:1
Uncaught SyntaxError: Unexpected token u background.html:1
Uncaught SyntaxError: Unexpected token u background.html:1
Uncaught SyntaxError: Unexpected token u background.html:1
Uncaught SyntaxError: Unexpected token u background.html:1
Uncaught SyntaxError: Unexpected token u background.html:1
Uncaught SyntaxError: Unexpected token u inspect.js:224
Uncaught SyntaxError: Unexpected token u inspect.js:224Uncaught SyntaxError: Unexpected token u inspect.js:224Uncaught SyntaxError: Unexpected token u inspect.js:224Uncaught SyntaxError: Unexpected token u inspect.js:224Uncaught SyntaxError: Unexpected token u inspect.js:224Uncaught SyntaxError: Unexpected token u inspect.js:224Uncaught SyntaxError: Unexpected token u inspect.js:224Uncaught SyntaxError: Unexpected token u inspect.js:224Uncaught SyntaxError: Unexpected token u inspect.js:224Uncaught SyntaxError: Unexpected token u inspect.js:224Uncaught SyntaxError: Unexpected token u inspect.js:224Uncaught SyntaxError: Unexpected token u inspect.js:224// this line:
   this.receiveError = function (ev) {
        var message = JSON.parse(ev.data);
        // Pitch the error to the view?

AMD CPU with Vista cannot connect to WLAN using MS-PEAP with WEP-128

Similar Messages

Maybe you are looking for