Amd drives not installing on my g6-2123

pavilion g6-2123 us
windows 7 64 bit

Hi,
What is the complete product name or product number for your notebook? What you have posted is only a partial one.
Are you able to boot into Windows?
There is a Recovery Manager available from within Windows that contains all of the applicable drivers for the installed operating system. Windows orb-->HP-->Recovery Manager.
Choose the AMD driver from the available list and click on install. If your notebook has an AMD discrete module and an Intel HD onboard graphics chip the driver will install both.
You can also install the drivers by using the recovery disk set or recovery media that you should have created when you first setup your notebook.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Similar Messages

Amd driver not installing in any os

hello everyone,
about 6 months erlier my harddrive crashed so i changed it with a new 7200rpm version, after that my problems started. first i installed win 7 and tried my amd driver form hp website but it didnot work. whenever i start installation windows freezes and there is no other option for me other then swiching off my lappy by holding the powerbutten. i tried all short of software from amd and intel and i tried leshcatlabs drivers too but nothing worked. so i tried win 8 and 8.1 but the results are same. intel driver works perfectly so does all the other drivers exept the amd drive.
its extremely frustrating . if any1 else have faced the same issue or anyone have any solution please reply.

What is the installed operating system in the notebook?
How did you install the OS in the new hard disk?
Did you verify that all required drivers are installed?
Which CPU is installed in the notebook?
Help us to help you by posting the following information.
1. The complete Model Name. or Product Number. of the notebook - see This HP web document if you don't how to locate the model number and\or product number.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

AMD driver not starting (code 10) - iPhone not recognised iTunes

Hi,
I am having a real issue with trying to get my iPhone recognised on iTunes. I have read through and tried every solution I can find and none have resolved my issue. Here are a list of solutions I've tried:
1. Restart services, Reinstall itunes, Empty temp directory, disable security, delete incorrect registry keys - http://support.apple.com/kb/TS1363?viewlocale=en_US
2. Restarted ADM - http://support.apple.com/kb/TS1567
3. Reinstall Apple Mobile Device driver - http://support.apple.com/kb/ts1538
After doing all these things, I think I boiled the issue down to the fact the driver is not digitally signed by Windows 7 (64-bit) - http://discussions.info.apple.com/thread.jspa?messageID=12702147&tstart=0
So I tried using the ReadyDriver plus software to get around the signature which sorted that out, however now when I try and reinstall the driver I get the following error:
"Apple Mobile Device USB Driver
This device cannot start. (Code 10)"
After looking at other threads on how to fix this I cannot see a solution. Can anybody help me out? It would be massively appreciate if so, I've spent 2 days with this and this is my last hope!

I don't know about the code 10 error, but I was not able to get my iPhone to sync because I could not get the AMDS to download/install. According to Apple, it should download and install with the program you are downloading (in my case, iTunes), but it rolled back during the install. The reason AMDS was not installing on my machine was because even after uninstalling all Apple programs *in the appropriate order* (iTunes, QuickTime, Apple Software Update, Apple Mobile Device Support [not applicable, since it never installed], Bonjour, and then Apple Application Support) and then emptying the recycle bin and then restarting, there were still Apple components on my machine. So, AFTER doing the above removal of programs, I also did the following:
1. Backed up the iTunes folder containing my music, ringtones, etc. on an external drive (in my case this was the main iTunes folder in the My Music folder).
2. Deleted this iTunes folder.
3. Deleted any Apple/iTunes folders found in MyComputer > C: > Program Files and Program Files (x86).
4. Deleted any Apple/iTunes folders found in MyComputer > C: > Program Files > Common Files and Program Files (x86) > Common Files.
5. Emptied the recycle bin and restarted the computer.
6. Temporarily turned off my firewall and antivirus, went to Apple online, and downloaded and reinstalled the Apple components (in my case, reinstalling iTunes was all I needed to do).
7. Let iTunes start after the install, but then exited iTunes, removed the folder I backed up previously, and replaced it with the folder I backed up.
8. Restarted iTunes.
It's possible that the problem I experienced was only with the residual files in the Program Files folder (versus those in the Program Files (x86) folder or due to the firewall and antivirus), but like you I had spent a lot of time on this and so I wasn't taking any chances.
Note: You sound tech savvy, but just in case...If you cannot see the folders containing the files you need to delete, go to My Computer, then to the Tools menu, then Folder Options (or in Windows 7 go to the Control Panel and search for Folder Options) and then make sure the “Show hidden files and folders” is selected and make sure “Hide extensions for known filetypes” and “Hide protected operating system files (Recommended)” are both un-selected (unchecked).

Hp Officejet Pro 8600 on Windows 8.1 driver not installed

Using Windows 8.1 and HP Officejet pro 8600. The printer is installed on a wireless network. But on Device Manager, it says "driver not installed". Most printing tasks are successful, but for some I need to have the driver installed on the computer. I have tried troubleshooting, but am unsuccessful. I would appreciate help. Thanks

Hi emax,
Print a configuration page to get the printer's IP address. Printing a Network Configuration Page.
If you have a valid IP address for the printer then try and access the Embedded Web Server for the printer.
Type the IP address into your web browser's address bar. (Internet Explorer)
If it loads the printer's network page then the printer is on the network.
Power cycle the router, computer and printer.
Try printing again.
If the issue persists, add a new device if the IP address is valid.
Right-click the Start button () or the lower left corner of the screen, and then click Search.
In the Search box, type HP, and then click the icon for your printer. The printer software opens.
Click Utilities, and then click Printer Setup & Software Selection.
Click Connect a new printer.
Test the printer over the wireless network.
Please provide the following information so I can assist you better.
What is the printer's first 3 sets of numbers for the IPV4 address?
Could you access the printer's EWS?
Were you able to add a new device?
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How to deal with the "driver not installed" message?

My issue, and it seems many others here have it too, is how to install a printer driver in the face of the "driver not installed" message.
In my case, it's an HP4160 Rendevous printer. I've deleted the com.apple.print files in the Library, reinstalled the software, made sure that BDC package, or whatever it's called is installed, even downloaded and run the printer fix software from Fixamac.
Nothing works.
I have the feeling this isn't a printer or driver-specific issue, but is an OS problem. Does anyone have a suggestion?

It appears the Deskjet 4160 will not work with an Airport. Connected via USB, the driver installs normally and the the printer appears to run just fine, although I haven't done much with it yet.
It simply will not work on a wireless network through an Airport. Frustrating, but workable by bringing the laptop to the printer.

TCP / IP Protocol Driver - not installed (using Windows 7 Home Premium (64 bit) Service Pack 1

I am using a ThinkPad T520 laptop. Lenovo Solutions Center keeps referring me (with a yellow exclamation mark) to the Device Manager and alerting me to a "non-critical" error. The message is "TCP / IP Protocol Driver - not installed".
I have found numerous pieces of advice for Windows XP and Vista - but very little for Windows 7. I have however tried the Microsoft "Fix it" solution and it had no effect.
I am still able to connect to the internet via Ethernet cable and wifi. It is however worrying that the warning keeps being raised.
Does anyone know how I can fix it?

Hi Tripplec.
Thanks for the reply. I am away from home at present without my ThinkPad, so will try it at the weekend. I am an experienced computer user but this is a brand new machine and I have never had a laptop that produced error messages without providing any suggested fixes. It seems that Lenovo is not suitable for ordinary home users, but only for computer engineers. Sadly that is not me... so before I plunge in, can I just check some details?
1. You suggest removing the offending network adapters in device manager. Which are the offending adapters that cause a TCP/IP protocol driver error? I am nervous of removing the wrong things and making it worse!
2. You also suggest that I go to Network Connections via Control panel, properties of adapter, Install and select the desired Protocol(s) and install them. Is that an alternative fix to 1 above - or an essential follow-on after removing the offending adapters? (Last week I searched the machine and the Lenovo support page of drivers - and never found a TCP/IP protocol driver. If you know where one can be found, I would prefer to instal a new driver, rather than delete other devices and hope that the machine reinstalls them later!).
Much obliged for your assistance.
Fillet

Problems adding USB printer - "Driver not installed" - but it is

Apparently, 10.3.9 has some problems with USB printers. For the record, I had already installed this earlier prior to the upgrade and everything worked fine - but due to crashing due to a faulty power supply - I've had to re-configure everything.
I, and many others in this forum, have found a strange problem when trying to add a printer (And yes, other people have asked about this but I haven't seen any answers at all that are useful. The only possible solution seems to be "upgrade to 10.4" and that is unacceptable. Does Apple check these forums?).
After clicking "add printer" in the utility, the software finds the correct printer (so obviously the physical connection to the printer is OK) and displays it with a question mark over it's icon and "driver not installed" next to it. I can't select this image or text.
After searching for a couple of minutes, a dialogue box pops up saying "New drivers detected. Do you want to reload the browser?" (I assume the printer setup utility is the "browser"?).
I click yes and nothing happens. No PPDs show up in the list. This happens when I select USB as well as Apple Talk from the printer-type pull-down menu.
How can I start printing again?
iMac G5 17" Mac OS X (10.3.9)
iMac G5 17" Mac OS X (10.3.9)
iMac G5 17" Mac OS X (10.3.9)
iMac G5 17" Mac OS X (10.3.9)
iMac G5 17" Mac OS X (10.3.9)

First, welcome to the discussions.
For the record, Apple does not normally respond to these Forums.
You mention (Due to Crashing) Whenever you have an issue with your machine it can disrupt in almost any area, and is normally caused by SOMETHING.
As of right now it would appear you might be chasing your tail.
When you choose to upgrade your Operating System there is No Guarantee that your Printer and it's drivers will work on another completely different Operating System.
Your best bet at this point is to drag all of your printer related folders to the trash, empty your trash, and plug your USB Printer (What KIND) into your machine directly.
Shut your machine clear OFF for a minute or so and do the same to your printer, pull the power adapter from it.
Now plug in your printers Power Adapter, Plug in the USB to your Printer to your computer and restart it.
Take the Disc that came with your printer and re insert it and download the Installation Folder and any utility folder that may come with it.
After you have done this don't try to print, Go directly to your Printer Manufactures Web site and search for the latest updates to your printer and the Operating System you are using.
These will more often than not download to your desktop.
You must drag these to the setup folder and or the utilities folder and then double click them to launch them. after you have completed this your printer should work.
One other thing, If you have Classic and or OS9 on your machine you might have to do the same for OS9 Applications , and Utilities for it to print in Classic. Don

AMDS will not install as part of 10.7 upgrade. have reinstalled many times..even manually. cannot change permissions in windows\system32\driverstore\filerepository\usb.inf_amd64_neutral_153b489118ee3 7b8

I have reinstalled Itunes 10.7 many times...each time it comes back and says that it cannot recognize my iphone because AMDS is not installed...yet when I try to install it fails...and asks me to reinstall Itunes again. It seems as though it may be realated to the usb.inf file in usb.inf_amd64_neutral_153b489118ee37b8.
I have seen where others fix the issue by changing permissions on the folder and replacing the file...the file says it is 6kb...but when I open the file...there is nothing there. I cannot even change the permission on the folder...even as an administrator. Please help!!!

I have had this problem with Windows 7 and iTunes updates for some time. Each time it takes hours to solve but with the over the air upgrade to IOS6 on my iPhone and iPad, I was determined to solve and remember what I did, So here it is:
http://www.care4pcs.co.uk/2012/09/pear-shaped-apple-ios-6-for-iphone-ipad.html
I hope this helps you and any other users.

PSE Backup wouldn't work: "CD device driver not installed; install PSE" didn't fix problem; Win7

I'm trying to backup by photos for the first time! in Photoshop 5.0 on a Windows 7 system. I get to "Full Backup" option, and get a pop-up that says "CD device driver not installed; reinstall PSE". I put my PSE disk into my computer, select "Repair... installs... missing files"; PSE re-installs, but I get the same message again when I try to backup. How do I find a CD device driver? (My DVD is formatted, but PSE can't find it.)

I just found a photoshop elements 5.0.2 update "patcher" and installed it. The install was successful but I still got the same message saying "CD device driver not installed". Might there be a problem since I'm now on Windows 7 and no longer on XP? I have no need to buy a newer version since Elements 5.0 does everything I need to do. Any other suggestions?

AMDS WILL NOT INSTALL!!! HELP PLEASE

Hi everyone,
Thanks for looking. Any thoughts would be greatly appreciated.
-iTunes 9.0.2
-Windows 7 Professional 64-bit
-2 iPod Touch (Late 2009) v 3.1.2
I am unable to get Apple Mobile Device Support to install on the computer. I have tried downloading the drivers for AMDS from outside websites and unzipping them into the correct folder (C>Program Files x86>Common Files>Apple) but unfortunately even unzipping this to this location does not help because of the fact that I have not merged them into the reg edit. Don't really want to do that because of the risk of dumping the whole computer. I saved the setup64.exe to the desktop and attempted to install as normal, compatibility mode(as Windows Vista w/SP2, as Admin), and in safe boot. None of which will install the AMDS. I have also attempted to install 9.0.1 64-Bit with the same luck. I have spent about 8 hours in all trying to get this work. When I attempted the install as normal the iPods were not recognized, but when I installed in compatibility mode the iPod was recognized as a digital camera in computer and device manager as a USB Mass Storage Device. So I went into Start>Control Panel>Hardware and Sound>Auto Play>Choose Take no Action, But the device still shows as a digital camera in computer because of course there is no AMDS. If i go into device manager and right click the device and select update it says the best device drivers are currently installed. Have also put the iPod touch into recovery mode and it will pop the new driver software bubbles in the bottom right but then it displays that the device drivers were not installed correctly and the more details sections advised you that the drivers did not install because AMDS is not currently installed. I think I'm at the end of the road here and thoughts would be greatly appreciated. Thanks again.

Bump...Help Please?

HP Envy 14 1260se graphics driver not installing correctly

Recently my computer crashed and I had to reformat my hard drive. I was able to install Windows 7 with the SP1 and I have most of the drivers installed from HPs website. However, I'm having trouble installing my gaphics card (ATI Mobility Radeon HD 5650).
I go to Device Manager and it marks an error for the "Standard VGA Graphics Adapter" the device status is "This device cannot start. (Code 10). I've downloaded the driver from HPs website and I can begin the installing process. However, halfway through I get a BlueScreen, LocaleID: 1033, BCCode: 116.
I've tried almost everything I can think of. I've uninstalled the driver and installed it again. I've downloaded the driver from AMDs website and tried installing it that way and all methods have failed. Always during the installation process I get the BlueScreen and must restore my computer to before I tried installing the driver.
I don't know if this would be the reason, but in my Device Manager and under Display adapters I have "Intel(R) HD Graphics" and the "Standard VGA Graphics Adapter" (which should be the Radeon 5650). So maybe I can't install my Radeon driver because it conflicts with my Intel card. I really don't know. (Before the clean install, my computer could switch between the cards. I don't think I have that ability in my computer right now.)
My computer is fully functional except that I can't use my graphics card. I appreaciate any help or advice out there.

Hello @notarealninja,
Welcome to the HP Forums, I hope you enjoy your experience!
I understand that your notebook computer is not able to install the graphics drivers correctly, and I would be happy to assist you in this matter!
In order to further diagnose the error message displayed on your computer screen, I recommend following this document on Blue Screen BCCode 116. This should help install any necessary software to prevent the occurrence of another Blue Screen message.
Additionally, if the drivers still do not install correctly, I also suggest installing the original software and hardware drivers that came with your computer. This can be done by following this document on Using Recovery Manager to Restore Software and Drivers (Windows 7). To update these drivers, please follow this document on Using HP Support Assistant (Windows 7).
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Ipod 5th Generation 80 GB / Device Manager / Driver not Installed / Code 28

Well, where do I begin! Got my 1st Ipod 2 days ago & still unable to use it! I have installed & uninstalled the itunes 7 software numerous times. On phone w/ Apple for 1 hour...followed by online chat help w/ Dell.
I've tryed 4 different USB ports on my computer. The device Manager shows the Ipod w/ a ? and a ! in yellow. The add new hardware tells me, "Drivers for this device are not installed. Code 28." My computer reconizes that the ipod is plugged in, but will not do anything. There is no communication between the 2. Keeps telling me to insert cd for software for ipod.
Help! Does seem that other people are having similar issues. I think a software cd should of been provided w/ the ipod....not sure if that would of corrected my problem.

Hi,
Click Start > All Programs > Accessories > Run. the Run dialog appears,
Type %temp%, then click OK.
locate and enter into the HP Installation temporary folder, start with the 7Z characters.
If you can see several folders starting with 7Z, locate the latest one.
Click the Address bar area, then the full address path will appear,
Copy the full path location by clicking CTRL + P while the path is selected.
Enter the Device Manager.
Right click the printer name with the error mark, then click Update Driver.
Select the second option to manually locate the driver.
Paste the temporary folder path and click Next (Keep Include Sub Fulders marked), the driver should be updated.
Please let me know of any change,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Ethernet Controller - Driver not installed - Compaq Presario

Hello, I am new here so be gentle
I have just bought second hand a Compaq Presario 6240EA, motherboard is a Compaq 07D0h.
In the hardware - device manager, it shows 'Other devices' - Ethernet Controller, with a large yellow question mark and exclamation mark.
Details in properties show the following: drivers for this device are not installed (Code 28)
PCI\VEN_10DE&DEV_01C3&SUBSYS_00A80E11&REV_C2\3&13C0B0C5&0&20
I have search the HP and Compaq websites for driver downloads and have downloaded all the nVidia drivers available on the Compaq site, none of which improve the situation.
Would there be somewhere else to look, I am at my wits end with this, any help would be much appreciated.
Thank you in anticipation.
This question was solved.
View Solution.

Please start your own thread rather than opening old ones back up. Also provide your full model number particularly when asking about hardware function which may involve drivers. We have to know precisely what hardware we are dealing with. Like the posts above, you may want to include the hardware id of the affected device.

Wifi driver not installing for windows7 64 Bit edition

HI
i had replaced my operating system to windows ultimate Bit.
My laptop model no: G580 (20157)
after replacing my operating system all the drivers are installed successfully except network controller & USB 3.0 host controller.
then after i tried to reinstall my driver and installed my driver.but wifi is not working
please help me my wifi driver is installed but not working.i had installed energy management then from shortcut i turn on my wifi but it is not turningon.
and when i searched from CMD promt(c:\netsh wlan show drivers),it gives there is no wifi driver found.
please anyone suggest me wether there is any other driver for this problem....

Hi Slape84,
Welcome to Lenovo Community Forums!
I’m sorry to hear that the Wireless driver is not getting installed in your G580 laptop after re-installing OS (Operating System), I suggest you to check if the Wireless is enabled in BIOS first then try to install the drivers. Below is the steps to access BIOS and check if the Wireless is enabled or not:
To enter BIOS setup utility, press F2 when the Lenovo logo appears on the screen while the computer is starting up.
NOTE: To check how the BIOS menu looks and to explore its options click here.
Now select “Configuration” Tab and enable the “Wireless LAN Support” by clicking on Enter Key when you are on the option.
Then Click on “F10” Key and then YES to save the changes that are done in BIOS, the computer will automatically restart.
Now check installing the Wireless driver in the computer, but and while installing while installing the driver right click on the downloaded file and select “Run as administrator” option to get it installed without any error.
NOTE: Please click on "Select Product" then in "QUICK PATH" enter the model no. as G580 select the exact model.
Support Drivers & Software downloads
Do post us back if the issue still persists.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

W540 FaceTime HD Camera (Display) Driver Not Installed

My new W540 (11/10/2014) Lenovo Solution Center under the Check-up tab alerts me that the FaceTime HD Camera (Display) Driver is Not Installed. Such as it is, the camera, a 720P HD, works just fine. A search of resources does not uncover any comment or Driver on this issue. So, since there is no problem as near as I can determine, should I just ignore the lack of Driver issue, and if so, what is the procedure to stop the Solution Center from alerting me to this error? But if on the other hand I should install the Driver, where is that to be found?
MTM 20BG-CTOWW
Other comments not related to the Subject:
I'm using the W540 in the Ultra Dock with video on a second monitor, an Apple monitor, using a Thunderbolt cable. There is no Thunderbolt port in the Dock, so I use the W540 port which surprised me that it works.
FWIW, it is taking me a lot of time learning the location of programs and utilities having moved from my old W510 Win 7(64) setup to the W540 Win(64) 8.1 setup.
W540 20GBCTO, Ultra Dock, W520, 4270CTO, W510, 4318CTO; (2)T500, 2081CTO; Y560, 064657U, Y530, 405166U; T61p, 6465CTO, A31p, and L2461x Multi-touch Monitor, Mini Dock Plus Series 3
Solved!
Go to Solution.

It is not a problem with the ThinkPad's camera. It is the camera in the Apple monitor that you don't have drivers for.
Being Apple, they might not even make driver for Windows.
W540: i7-4700mq, K2100m, 8 GB DDR3L, 512 GB SSD
T510: i7-620m, NVS 3100m, 8 GB DDR3, 512 GB SSD

Amd drives not installing on my g6-2123

Similar Messages

Maybe you are looking for