AMD HD8530M OpenCL Accelaration

Hi everyone,
  I'm new on this comunity, I'm interested in buying a notebook with an internal AMD HD8530M Graphic Card, I've checked and it seems that this card support OpenCl 1.2, but on the Premiere Pro CC is not listed in the supported graphics card. Will i benefict of Hw accelaration in Premiere Pro CC with this card or even if it support OpenCl 1.2 I'll not get any accelaration?
Thanks to everyone.
M.

It turns out that this phenomenon was caused by bad drivers for an off-brand USB 3.0 Video Adapter I had tested several months ago and had forgotten about. Removing the drivers solved my problem instantly.  It was just double-bad luck that I had installed it on two nearly identical computers, making it look like an issue with the motherboard. Thankfully, both my Gigabyte-Thunderbolt motherboards work fine with Premiere.  As for the "White Video", while testing another configuration with one accelerated and one non-accelerated video card,  I did get the "White Video" when previewing to monitors attached to the non-accelerated cards, but I consider this a hardware problem, not software.  If anyone else has this problem, I would recommend cleaning their computers and making sure the cards they are using make sense for what they are doing. 

Similar Messages

  • Apple, Mac Pro, Amd vs Nvidia with cuda? Why, and what to buy for Premiere Pro?

    Mac Pro has dual Amd video cards installed, and does not offer Nvidia cards with Cuda in this line up, as far as I can tell. The iMacs offer nvidia cards which seem a better choice for Premiere Pro which uses the cuda rendering capabilities. Which would be best for Premiere Pro? The quad Mac Pro, or the top of the line iMac with double the ram, say 32gigs vs 16 in the Mac Pro?  Why did Apple put AMD cards in the Mac Pro line?

    jtopenshaw wrote:
    Why did Apple put AMD cards in the Mac Pro line?
    Apple believes that OpenCL, not CUDA, is the future of GPGPU computing.  CUDA is closed and proprietary to nVidia only.  OpenCL is, as the name says: open.
    As of the creation and planning of the Mac Pro, nVidia's GPUs were (and most of them still are) very poor performers when it comes to OpenCL.  I expect that, over time, nVidia will catch up to AMD regarding OpenCL.  But they're not quite there yet, across the board.
    Why are the GPUs in the iMac (and Macbook Pro) nVidia?  They make better and more efficient mobile GPUs at this point in time.  The GPU in the iMac is similar to the GPU in the Macbook Pro in that they're both mobile, not desktop GPUs.  AMD has a fairly poor representation in that market (so far), so Apple stuck with nVidia.
    It's likely that Apple doesn't see the iMac and Macbook Pro lineup as devices to be used for massive GPGPU processing.  The Mac Pro, on the other hand is where they see that being used heavily.  Perhaps when and if AMD decides to produce an efficient and powerful mobile GPU, Apple will cut (back) over to them.  But one can only guess, there.
    Ugio wrote:
    What I can tell you it's that the mixture between Mac Pro (2013) and the last Adobe Suite does not worth the money.
    That's fair and is your opinion.  I don't agree. :-)

  • Can SpeedGrade use GPU Acceleration in New Mac Pro?

    Good afternoon, I would like to know if Adobe SpeedGrade is able to take advantage of GPU acceleration AMD FirePro D500 installed in the brand new Mac Pro. Thanks in advance for your reply.
    Message was edited by: Kevin Monahan
    Reason: More searchable title

    Supported GPU technologies (Mac):
    - AMD/nVidia OpenCL for direct link in MacOS 10.8.5 and higher
    - OpenGL for SG native
    Supported GPU technologies (Win):
    - AMD OpenCL, nVidia Cuda for direct link in Win7,Win8, Win8.1
    - OpenGL for SG native
    Note: Although SG not utilises two GPU's, it should run fine on your new Mac Pro and use OpenCL for acceleration

  • Which video card should I get?

    Just got a BMPCC, and I shoot in raw. I color grade in Resolve and transfer it over to Premiere and I notice that Premiere and Resolve are laggin.
    My system:
    i7 3960x
    16 GB Ram
    nVidia 480 GTX
    3x raided SSD's (don't know the read our write speed on the top of my head)
    Never had problems with premiere till recently. I'm thinking it's the video card, and probably the rams (prob going to upgrade to 32 gb.)
    I'm willing to spend $200-$500. From what I've been reading on Google, Cuda works a lot better in premiere then AMD's OpenCL. Obviously, the less the price, the better. I bought the GTX 480 when it was about 2 generations old, but I bought it because of the price compared to performance.
    Also, looking to get into After Effects. So any card that is balanced between Premiere and Effects would be great.
    Any recommendations would be appreciated!
    edit: I'm using all Adobe CC programs.

    Read reply #1 in http://forums.adobe.com/thread/1366106?tstart=0 in the hardware forum

  • [SOLVED] OpenCL AMD/Radeon (amdstream) Missing Device Without X

    So I bought an AMD 6950 to do faster computing, since it seemed like the cheapest way to get a lot of stream processors. Unfortunately, I am having trouble getting the drivers to work. I have installed amdstream and libopencl from AUR.
    If X is running then the screen freezes (presumably because the video card is being shared), but if X isn't running, /opt/amdstream/bin/clinfo hangs, and so do any opencl programs that attempt to get a list of available platforms. Strace seems to indicate that the program is attempting to connect to X:
    http://paste.pocoo.org/show/463191/
    Any thoughts on this?
    Edit:
    Hanging was caused by iptables, I was blocking 127.0.0.1, which prevented ./clinfo from failing to connect to X, and thus the hang.
    Now the problem is that without X, my GPU doesn't show up, just my CPU:
    http://paste.pocoo.org/show/463204/
    http://paste.pocoo.org/show/463208/
    Last edited by yiuin (2011-08-24 01:38:18)

    Apparently X has to be running which is a little lame:
    http://developer.amd.com/support/Knowle … aspx?ID=19

  • OpenCL and CUDA. AMD 6870 or gtx 570. (Keeping the future in mind).

    What GPU would be better, the 6870 or the GTX 570 for After Effects and Premiere Pro. With Apple completely jumping onto AMD GPUs, what is the future of OpenCL?
    Should I get a AMD 6870  for 40$ or a GTX 570 for 50$?

    No doubt in my mind, The nVidia is generally twice as fast as equivalent AMD GPU's.  I have tested both brands.

  • AMD GPU acceleration unavailable. (OpenCL)

    Hello,
    I want to activate GPU acceleration for Premiere Pro CC 2014.2 however within project settings the bar is grayed out with 'Mercury Playback Engine Software Only' as the selected option.
    I contacted adobe chat support and they got me to do the following:
    1. Uninstall Premiere and remove preferences
    2. Uninstall all AMD drivers (including the OpenCL driver I installed)
    3. Restart my computer
    4. Re-install Amd drivers then Premiere.
    I also used GPU-Z to determine if my GPU is OpenCl enabled, which it is. (Screenshot: http://puu.sh/fsgBP.png)
    None of this worked and my problem is still the same.
    Computer specs:
    Intel i7-4790 CPU 3.60GHz
    16.0 GB RAM (15.8 GB usable)
    AMD Radeon R9 290 GPU 4096 MB VRAM
    Help pls

    I have just run into this problem.  A 4 camera multicam with Lumetri on 3 of the 4 cameras resulting in a straight Quicktime 422 render slowdown of approximately 60x (i.e., 11 minute clip took 11 hours to render).  I killed the Lumetri effects, replaced them with some manual (and simple) color correctors, and now the 11 minute clip renders in 11 minutes (give or take).  It is a shame that it took me a day to track down this information.  Perhaps Adobe should at least warn people that Lumetri and the AMD Radeon 6750M with OpenCL are a match made in hell.

  • MOVED: Problem with OpenCL - AMD R9 M290X

    This topic has been moved to MSI Notebooks & Netbooks.
    https://forum-en.msi.com/index.php?topic=182818.0

    I don't think that card is supported by AMD Catalyst anymore, even by the legacy branch...

  • AMD and Adobe Collaborate on Upcoming Version of Adobe Premiere Pro Software

    AMD and Adobe Collaborate on Upcoming Version of Adobe Premiere Pro Software to Enable Breakthrough Video Editing Performance through Open Standards
    AMD A-Series APU, Radeon and FirePro graphics technology work seamlessly with next version of Adobe Premiere Pro software to provide real-time editing, effects, compositing and color grading
    http://www.amd.com/us/press-releases/Pages/amd-and-adobe-2013apr5.aspx
    SUNNYVALE, Calif. —4/5/2013
    AMD (NYSE: AMD) today announced its collaboration with Adobe Systems Incorporated to deliver OpenCL™ hardware-accelerated video editing for the first time on the Microsoft Windows platform with the next version of Adobe® Premiere® Pro. This collaboration further demonstrates AMD’s commitment to enabling partner ecosystems with cross-platform open standards, empowering Adobe to amplify the editing experience for creative professionals everywhere. The combination of expanded support for open standards and the Adobe Creative Cloud™ brings unmatched access to the most up-to-date and powerful professional post-production tools anywhere.
    The next version of Adobe Premiere Pro has been optimized to take full advantage of a wider range of AMD professional- and consumer-class graphics processing units (GPUs) and accelerated processing units (APUs), delivering  unprecedented real-time editing with formats from DV to HD and 4K Ultra HD at high frame rates. Now Adobe and AMD extend this advanced OpenCL functionality to creative professionals running the Windows operating system. The expanded support on Windows and OSX complements the already popular Mac OSX OpenCL support available on Adobe Premiere Pro.
    “AMD and Adobe are dedicated to delivering professional- and consumer-level solutions that support open standards and provide artists everywhere with the ability to create at the speed of thought,” said Neal Robison, senior director, Software Alliances at AMD. “Through AMD’s strong relationship with Adobe, video editors no longer have to wait for the rendering of edits, effects and composites ─ most everything can now be achieved at high-quality in real-time.”
    Coupling AMD graphics hardware with the latest Adobe software, video professionals and prosumers alike will benefit from seamless, high-quality feedback. The next version of Adobe  Premiere Pro with support for OpenCL harnesses the power of discrete AMD graphics cards and AMD A-Series APU’s to enable real-time edits, application of dozens of effects, support for the new Lumetri deep-color engine, and multi-stream and mixed format accelerated workflows with AMD Eyefinity multi-display technology.
    From its APUs and notebook graphics cards to professional workstation cards like the AMD FirePro™ W-series, AMD technology works transparently with Adobe Premiere Pro to provide scalable GPU-accelerated editing solutions for inspired prosumers and creative professionals everywhere. The software is accelerated by OpenCL to efficiently harness the compute power of AMD APU and graphics products and achieve up to 4.3X faster exports from a source format with effects to a preferred final destination format for quick and easy distribution and publishing1.
    “We’re all about creating the best software possible, and at NAB we’re revealing some incredible enhancements to our video editing tools,” said Simon Williams, director of strategic relations at Adobe. “Our customers require powerful systems that enable them to work quickly and efficiently. While we already support OpenCL on the Mac, today’s announcement gives creative professionals the opportunity to tap into the massive compute resources of AMD APUs and GPUs on Windows-based PCs, broadening the type of accelerated experience they can have with our upcoming software.”
    Video professionals and enthusiasts utilizing the Adobe Creative Cloud gain a competitive advantage through immediate access to AMD hardware-accelerated features and functionality with the latest Adobe video production software. Adobe Creative Cloud offers an end-to-end, cross-platform tool kit with industry-leading software seamlessly integrated with all the hardware needed to create, collaborate and stay connected.
    At NAB, Adobe is previewing the next generation of its professional video and audio products (NAB Booth SL3910.) Learn more about the next versions of Adobe’s pro video and audio tools at: www.adobe.com/go/nab_reveal. More information about Adobe's upcoming new video tools will be unveiled at Adobe MAX, The Creativity Conference, May 4-8 in Los Angeles, Calif.
    Supporting Resources
    With Adobe Creative Cloud a simple monthly membership gives you the complete collection of Adobe creative desktop applications. Along with cloud storage, Creative Cloud members automatically get access to new tools and product updates as soon as they’re released.
    For more information about AMD and Adobe at NAB Show
    For more information about AMD Performance
    For more information about AMD and the new version of  Adobe Premiere Pro
    Details about AMD and Adobe
    For more information about AMD FirePro™ Graphics
    For more information about Adobe
    For more information about AMD
    About AMD
    AMD (NYSE: AMD) is a semiconductor design innovator leading the next era of vivid digital experiences with its groundbreaking AMD Accelerated Processing Units (APUs) that power a wide range of computing devices. AMD's server computing products are focused on driving industry-leading Cloud computing and virtualization environments. AMD's superior graphics technologies are found in a variety of solutions ranging from game consoles, PCs to supercomputers. For more information, visit http://www.amd.com.
    AMD, the AMD Arrow logo, FirePro and Radeon are trademarks of Advanced Micro Devices, Inc. Other names are for informational purposes only and may be trademarks of their respective owners.
    Testing was performed by AMD, test project used the “Three-way Color Corrector” effect with the NAB 2013 “sneak peek” build of Premiere Pro Next provided by Adobe, .MP4 video file, 17 seconds, 1920x1080, 24fps with .WAV audio file, 169 seconds, 1411 kb/s audio bitrate, 41 khz audio sample rate, export to Device – Apple TV, iPad, iPhone 4 and newer, 720p, 29.97 max render quality.  With OpenCL (GPU acceleration) enabled, the export took 46.6 seconds. With CPU only, the export took 246.1 seconds. Test system was a desktop PC configured with an AMD A10-6800K APU with AMD Radeon™ HD 8670D Graphics, 8GB DDR3-2133 running Window 8 Professional (x64) build 9200, video driver 12.102.0.0. RID-10

    CS7... or CS6.5?
    I don't have any links, but I remember a past discussion where the Adobe CEO said they would be going to an annual release cycle... with a .5 (paid) upgrade between the major version upgrades
    If that is still true, that means that what will come out this year will be CS6.5

  • AME takes a long time to start encoding when using GPU Acceleration (OpenCL)

    Have had this issue for a while not (current update as well as at least the previous one).
    I switched to using GPU Hardware Acceleration over Software Only rendering. The speed for the actual encoding on my Mac is much faster that software only rendering. However, more often than not, the encoding process seems to stick at 0% waiting to start for a long time, say anywhere from 1 minute to several minutes. Then it will eventually start.
    Can't seem to find what is causing this. Doesn't seem related to any particular project, codec, output format or anything else I can see. I'd like to keep using GPU Acceleration but it's pointless if it takes 5 times as long to even start as rendering by software-only would. It doesn't even pass any elapsed time while it's hanging or waiting. Says at 0 until it starts. Like I said, once it starts, it's a much faster render than what the software would take. Any suggestions? Thanks.
    using an iMac, 3.4Ghz, 24GB RAM, AMD Radeon HD 6970M 2048 MB

    Actually, I just discovered it doesn't seem to have anything to do with OpenCL. I just put the rendering back to software only and it is doing the same thing. hangs for a long time before it starts to run. Activity monitor shows it running 85-95% CPU, 17 threads and about 615 MB of memory. Activity Monitor doesn't say its not responding, it just seems kind of idle. It took almost 7 minutes for it to start rendering.
    1- Running version 7.2.2.29 of Media Encoder,
    version 7.2.2 (33) of Premiere.
    2- Yes, a premiere project of HD 1080 source shot with Canon 60D, output to H.264 YouTube 720, fps 23.976
    not sure what you are referring to by native rendering. The rendering setting i tried now is Mercury Playback Engine Software Only if that is what you are referring to. But OpenCL gives me the same issue now.
    3- H.264 YouTube 720, 23,976 - seems to happen on multiple output types
    4- In Premiere, I have my project timeline window selected. Command-M, selected the output location I wanted and what output codec, selected submit to Queue. Media Encoder comes up, the project loads and I select the run icon. It preps and shows the encoding process setup in the "Encoding" window, then just sits there with no "Elapsed" time occurring until almost 5-6 minutes later, then it kicks in.

  • Does OpenCL Work With ATI Radeon HD 4670?

    Some of the new iMacs have an ATI Radeon HD 4670 graphics card.
    On Apple's Snow Leopard technical specifications page, they list all of the graphics card that work with OpenCL. The ATI Radeon HD 4670 isn't one of them!
    What does this mean? Have Apple simply not updated the page, or do the new iMacs not support OpenCL?

    The answer is not clear.
    Other people (e.g., me) want to know THE answer also.
    I did some poking around and it appears that AMD is working on it. Note that I wrote "it appears".
    If you really want OpenCL support AND you must buy today AND you want that support guaranteed, then you must buy the $1999 iMac.

  • [AMD Catalyst] problem with "major" file

    Hi, I'm using now the free driver xf86-video-ati for my [Radeon 9200 SE] card, and for several reasons, I want to switch to the proprietary driver, Catalyst.
    I followed all the steps of the wiki, but when I "startx", it display:
    ukiDynamicMajor = failed to open /proc/ati/major
    I would precise that the command "modprobe fglrx"  says "fglrx is not a valid expression". I hesitated to use aticonfig, but people say that creating one xorg.cong is bad; thus I have deleted this option.
    What I have done:
    pacman -S catalyst-hook catalyst-utils catalyst-libgl opencl-catalyst (install succeed)
    pacman -R xf86-video-intel xf86-input-evdev (uninstall succeed exept for xf86-input-evdev because of his dependence on xorg-server)
    modprobe fglrx (doesn't work)
    touch /etc/modules-load.d/catalyst.conf (the file already exist)
    less /etc/modules-load.d/catalyst.conf ("fglrx")
    touch /etc/X11/xorg-conf.d/20-catalyst.conf
    nano /etc/X11/xorg-conf.d/20-catalyst.conf
    [quote]
    Section "Device"
    Identifier "Card0"
    Driver "fglrx"
    VendorName "ATI Technologies Inc"
    BusID "PCI:1:00:1"
    EndSection
    [/quote]
    rnmod radeon (doesn't work => rnmod is not a valid program)
    touch /etc/modprobe.d/radeon_blacklist (sucessful)
    echo /etc/modprobe.d/radeon_blacklist "blacklist radeon"( sucessful)
    Config:
    uname -a
    Linux archlinux-desktop 3.14.3-1-ARCH #1 SMP PREEMPT Tue May 6 22:45:18 CEST 2014 i686 GNU/Linux
    lspci
    00:00.0 Host bridge: Silicon Integrated Systems [SiS] 645xx (rev 51)
    00:01.0 PCI bridge: Silicon Integrated Systems [SiS] AGP Port (virtual PCI-to-PCI bridge)
    00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] LPC Controller (rev 14)
    00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2/3 SMBus controller
    00:02.3 FireWire (IEEE 1394): Silicon Integrated Systems [SiS] FireWire Controller
    00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 IDE Controller
    00:02.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0)
    00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS7012 AC'97 Sound Controller (rev a0)
    00:03.0 USB controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
    00:03.1 USB controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
    00:03.2 USB controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
    00:03.3 USB controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
    00:0f.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
    01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV280 [Radeon 9200 SE] (rev 01)
    01:00.1 Display controller: Advanced Micro Devices, Inc. [AMD/ATI] RV280 [Radeon 9200 SE] (Secondary) (rev 01)
    dmesg 
    [    0.000000] Initializing cgroup subsys cpuset
    [    0.000000] Initializing cgroup subsys cpu
    [    0.000000] Initializing cgroup subsys cpuacct
    [    0.000000] Linux version 3.14.3-1-ARCH (nobody@var-lib-archbuild-testing-i686-tobias) (gcc version 4.9.0 (GCC) ) #1 SMP PREEMPT Tue May 6 22:45:18 CEST 2014
    [    0.000000] e820: BIOS-provided physical RAM map:
    [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
    [    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
    [    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
    [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffeffff] usable
    [    0.000000] BIOS-e820: [mem 0x000000001fff0000-0x000000001fff2fff] ACPI NVS
    [    0.000000] BIOS-e820: [mem 0x000000001fff3000-0x000000001fffffff] ACPI data
    [    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
    [    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
    [    0.000000] SMBIOS 2.3 present.
    [    0.000000] DMI: Packard Bell NEC 00000000000000000000000, BIOS F2 10/15/2003
    [    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [    0.000000] e820: last_pfn = 0x1fff0 max_arch_pfn = 0x100000
    [    0.000000] MTRR default type: uncachable
    [    0.000000] MTRR fixed ranges enabled:
    [    0.000000]   00000-9FFFF write-back
    [    0.000000]   A0000-BFFFF uncachable
    [    0.000000]   C0000-CAFFF write-protect
    [    0.000000]   CB000-EFFFF uncachable
    [    0.000000]   F0000-FFFFF write-through
    [    0.000000] MTRR variable ranges enabled:
    [    0.000000]   0 base 000000000 mask FE0000000 write-back
    [    0.000000]   1 base 0D0000000 mask FF8000000 write-combining
    [    0.000000]   2 disabled
    [    0.000000]   3 disabled
    [    0.000000]   4 disabled
    [    0.000000]   5 disabled
    [    0.000000]   6 disabled
    [    0.000000]   7 disabled
    [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [    0.000000] found SMP MP-table at [mem 0x000f5370-0x000f537f] mapped at [c00f5370]
    [    0.000000] Scanning 1 areas for low memory corruption
    [    0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
    [    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
    [    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [    0.000000]  [mem 0x00000000-0x000fffff] page 4k
    [    0.000000] init_memory_mapping: [mem 0x1f800000-0x1fbfffff]
    [    0.000000]  [mem 0x1f800000-0x1fbfffff] page 2M
    [    0.000000] init_memory_mapping: [mem 0x18000000-0x1f7fffff]
    [    0.000000]  [mem 0x18000000-0x1f7fffff] page 2M
    [    0.000000] init_memory_mapping: [mem 0x00100000-0x17ffffff]
    [    0.000000]  [mem 0x00100000-0x003fffff] page 4k
    [    0.000000]  [mem 0x00400000-0x17ffffff] page 2M
    [    0.000000] init_memory_mapping: [mem 0x1fc00000-0x1ffeffff]
    [    0.000000]  [mem 0x1fc00000-0x1ffeffff] page 4k
    [    0.000000] BRK [0x01798000, 0x01798fff] PGTABLE
    [    0.000000] RAMDISK: [mem 0x1efe2000-0x1f302fff]
    [    0.000000] ACPI: RSDP 000f7520 000014 (v00 GBT   )
    [    0.000000] ACPI: RSDT 1fff3000 00002C (v01 GBT    AWRDACPI 42302E31 AWRD 01010101)
    [    0.000000] ACPI: FACP 1fff3040 000074 (v01 GBT    AWRDACPI 42302E31 AWRD 01010101)
    [    0.000000] ACPI: DSDT 1fff30c0 003104 (v01 GBT    AWRDACPI 00001000 MSFT 0100000C)
    [    0.000000] ACPI: FACS 1fff0000 000040
    [    0.000000] ACPI: APIC 1fff6200 000068 (v01 GBT    AWRDACPI 42302E31 AWRD 01010101)
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] 0MB HIGHMEM available.
    [    0.000000] 511MB LOWMEM available.
    [    0.000000]   mapped low ram: 0 - 1fff0000
    [    0.000000]   low ram: 0 - 1fff0000
    [    0.000000] BRK [0x01799000, 0x01799fff] PGTABLE
    [    0.000000] Zone ranges:
    [    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
    [    0.000000]   Normal   [mem 0x01000000-0x1ffeffff]
    [    0.000000]   HighMem  empty
    [    0.000000] Movable zone start for each node
    [    0.000000] Early memory node ranges
    [    0.000000]   node   0: [mem 0x00001000-0x0009efff]
    [    0.000000]   node   0: [mem 0x00100000-0x1ffeffff]
    [    0.000000] On node 0 totalpages: 130958
    [    0.000000] free_area_init_node: node 0, pgdat c15fc600, node_mem_map dfbf0020
    [    0.000000]   DMA zone: 32 pages used for memmap
    [    0.000000]   DMA zone: 0 pages reserved
    [    0.000000]   DMA zone: 3998 pages, LIFO batch:0
    [    0.000000]   Normal zone: 992 pages used for memmap
    [    0.000000]   Normal zone: 126960 pages, LIFO batch:31
    [    0.000000] Using APIC driver default
    [    0.000000] ACPI: PM-Timer IO Port: 0x1008
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
    [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [    0.000000] IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
    [    0.000000] ACPI: IRQ0 used by override.
    [    0.000000] ACPI: IRQ2 used by override.
    [    0.000000] ACPI: IRQ9 used by override.
    [    0.000000] Using ACPI (MADT) for SMP configuration information
    [    0.000000] smpboot: Allowing 2 CPUs, 1 hotplug CPUs
    [    0.000000] nr_irqs_gsi: 40
    [    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
    [    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
    [    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
    [    0.000000] e820: [mem 0x20000000-0xfebfffff] available for PCI devices
    [    0.000000] Booting paravirtualized kernel on bare hardware
    [    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
    [    0.000000] PERCPU: Embedded 14 pages/cpu @dfbd0000 s33792 r0 d23552 u57344
    [    0.000000] pcpu-alloc: s33792 r0 d23552 u57344 alloc=14*4096
    [    0.000000] pcpu-alloc: [0] 0 [0] 1
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129934
    [    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=14bd8feb-04a9-4b92-b3cb-798729208c52 rw quiet
    [    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
    [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    [    0.000000] Initializing CPU#0
    [    0.000000] allocated 1048440 bytes of page_cgroup
    [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [    0.000000] Initializing HighMem for node 0 (00000000:00000000)
    [    0.000000] Memory: 507120K/523832K available (4446K kernel code, 470K rwdata, 1280K rodata, 568K init, 956K bss, 16712K reserved, 0K highmem)
    [    0.000000] virtual kernel memory layout:
        fixmap  : 0xfff15000 - 0xfffff000   ( 936 kB)
        pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
        vmalloc : 0xe07f0000 - 0xff7fe000   ( 496 MB)
        lowmem  : 0xc0000000 - 0xdfff0000   ( 511 MB)
          .init : 0xc160f000 - 0xc169d000   ( 568 kB)
          .data : 0xc1457c92 - 0xc160eb40   (1755 kB)
          .text : 0xc1000000 - 0xc1457c92   (4447 kB)
    [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [    0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [    0.000000] Preemptible hierarchical RCU implementation.
    [    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
    [    0.000000]     Dump stacks of tasks blocking RCU-preempt GP.
    [    0.000000]     RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
    [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
    [    0.000000] NR_IRQS:2304 nr_irqs:512 16
    [    0.000000] CPU 0 irqstacks, hard=df408000 soft=df40a000
    [    0.000000] Console: colour dummy device 80x25
    [    0.000000] console [tty0] enabled
    [    0.000000] tsc: Fast TSC calibration using PIT
    [    0.000000] tsc: Detected 2625.859 MHz processor
    [    0.003353] Calibrating delay loop (skipped), value calculated using timer frequency.. 5253.53 BogoMIPS (lpj=8752863)
    [    0.003360] pid_max: default: 32768 minimum: 301
    [    0.003378] ACPI: Core revision 20131218
    [    0.008679] ACPI: All ACPI Tables successfully acquired
    [    0.010020] Security Framework initialized
    [    0.010032] Yama: becoming mindful.
    [    0.010064] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.010069] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.010456] Initializing cgroup subsys memory
    [    0.010473] Initializing cgroup subsys devices
    [    0.010478] Initializing cgroup subsys freezer
    [    0.010482] Initializing cgroup subsys net_cls
    [    0.010485] Initializing cgroup subsys blkio
    [    0.010546] CPU0: Hyper-Threading is disabled
    [    0.010555] mce: CPU supports 4 MCE banks
    [    0.010568] CPU0: Thermal monitoring enabled (TM1)
    [    0.010592] Last level iTLB entries: 4KB 128, 2MB 128, 4MB 128
    Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64, 1GB 0
    tlb_flushall_shift: 6
    [    0.018898] ftrace: allocating 18912 entries in 37 pages
    [    0.026857] Enabling APIC mode:  Flat.  Using 1 I/O APICs
    [    0.027167] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [    0.062643] smpboot: CPU0: Intel(R) Celeron(R) CPU 2.60GHz (fam: 0f, model: 02, stepping: 09)
    [    0.063333] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
    [    0.063333] ... version:                0
    [    0.063333] ... bit width:              40
    [    0.063333] ... generic registers:      18
    [    0.063333] ... value mask:             000000ffffffffff
    [    0.063333] ... max period:             0000007fffffffff
    [    0.063333] ... fixed-purpose events:   0
    [    0.063333] ... event mask:             000000000003ffff
    [    0.076710] x86: Booted up 1 node, 1 CPUs
    [    0.076719] smpboot: Total of 1 processors activated (5253.53 BogoMIPS)
    [    0.077148] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [    0.077427] devtmpfs: initialized
    [    0.077889] PM: Registering ACPI NVS region [mem 0x1fff0000-0x1fff2fff] (12288 bytes)
    [    0.079963] pinctrl core: initialized pinctrl subsystem
    [    0.080103] RTC time: 16:19:41, date: 05/12/14
    [    0.080222] NET: Registered protocol family 16
    [    0.080459] cpuidle: using governor ladder
    [    0.080464] cpuidle: using governor menu
    [    0.080574] ACPI: bus type PCI registered
    [    0.080581] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [    0.092329] PCI: PCI BIOS revision 2.10 entry at 0xfb1c0, last bus=1
    [    0.092335] PCI: Using configuration type 1 for base access
    [    0.093965] bio: create slab <bio-0> at 0
    [    0.094273] ACPI: Added _OSI(Module Device)
    [    0.094279] ACPI: Added _OSI(Processor Device)
    [    0.094282] ACPI: Added _OSI(3.0 _SCP Extensions)
    [    0.094286] ACPI: Added _OSI(Processor Aggregator Device)
    [    0.098161] ACPI: Interpreter enabled
    [    0.098184] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
    [    0.098193] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
    [    0.098216] ACPI: (supports S0 S3 S4 S5)
    [    0.098220] ACPI: Using IOAPIC for interrupt routing
    [    0.098299] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
    [    0.098438] ACPI: No dock devices found.
    [    0.108047] ACPI: \_PR_.CPU1: failed to get CPU APIC ID.
    [    0.108184] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [    0.108198] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
    [    0.108210] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
    [    0.108371] acpi PNP0A03:00: host bridge window [io  0x0000-0x047f] (ignored)
    [    0.108378] acpi PNP0A03:00: host bridge window [io  0x0490-0x0cf7] (ignored)
    [    0.108381] acpi PNP0A03:00: host bridge window [io  0x0d00-0x0fff] (ignored)
    [    0.108385] acpi PNP0A03:00: host bridge window [io  0x1100-0xffff] (ignored)
    [    0.108389] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
    [    0.108393] acpi PNP0A03:00: host bridge window [mem 0x20000000-0xfebfffff] (ignored)
    [    0.108397] PCI: root bus 00: using default resources
    [    0.108402] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
    [    0.108726] PCI host bridge to bus 0000:00
    [    0.108736] pci_bus 0000:00: root bus resource [bus 00-ff]
    [    0.108741] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
    [    0.108746] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
    [    0.108768] pci 0000:00:00.0: [1039:0648] type 00 class 0x060000
    [    0.108783] pci 0000:00:00.0: reg 0x10: [mem 0xd0000000-0xd7ffffff]
    [    0.109012] pci 0000:00:01.0: [1039:0003] type 01 class 0x060400
    [    0.109196] pci 0000:00:02.0: [1039:0008] type 00 class 0x060100
    [    0.109281] pci 0000:00:02.0: Enabling SiS 96x SMBus
    [    0.109447] pci 0000:00:02.1: [1039:0016] type 00 class 0x0c0500
    [    0.109507] pci 0000:00:02.1: reg 0x20: [io  0x1400-0x141f]
    [    0.109684] pci 0000:00:02.3: [1039:7007] type 00 class 0x0c0010
    [    0.109711] pci 0000:00:02.3: reg 0x10: [mem 0xeb000000-0xeb000fff]
    [    0.109771] pci 0000:00:02.3: reg 0x30: [mem 0x00000000-0x0001ffff pref]
    [    0.109811] pci 0000:00:02.3: supports D1 D2
    [    0.109815] pci 0000:00:02.3: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.110016] pci 0000:00:02.5: [1039:5513] type 00 class 0x010180
    [    0.110085] pci 0000:00:02.5: reg 0x20: [io  0xf000-0xf00f]
    [    0.110284] pci 0000:00:02.6: [1039:7013] type 00 class 0x070300
    [    0.110311] pci 0000:00:02.6: reg 0x10: [io  0xd000-0xd0ff]
    [    0.110325] pci 0000:00:02.6: reg 0x14: [io  0xd400-0xd47f]
    [    0.110410] pci 0000:00:02.6: supports D1 D2
    [    0.110414] pci 0000:00:02.6: PME# supported from D3hot D3cold
    [    0.110506] pci 0000:00:02.6: System wakeup disabled by ACPI
    [    0.110605] pci 0000:00:02.7: [1039:7012] type 00 class 0x040100
    [    0.110631] pci 0000:00:02.7: reg 0x10: [io  0xd800-0xd8ff]
    [    0.110645] pci 0000:00:02.7: reg 0x14: [io  0xdc00-0xdc7f]
    [    0.110730] pci 0000:00:02.7: supports D1 D2
    [    0.110734] pci 0000:00:02.7: PME# supported from D3hot D3cold
    [    0.110907] pci 0000:00:03.0: [1039:7001] type 00 class 0x0c0310
    [    0.110929] pci 0000:00:03.0: reg 0x10: [mem 0xeb001000-0xeb001fff]
    [    0.111078] pci 0000:00:03.0: System wakeup disabled by ACPI
    [    0.111177] pci 0000:00:03.1: [1039:7001] type 00 class 0x0c0310
    [    0.111199] pci 0000:00:03.1: reg 0x10: [mem 0xeb002000-0xeb002fff]
    [    0.111356] pci 0000:00:03.1: System wakeup disabled by ACPI
    [    0.111454] pci 0000:00:03.2: [1039:7001] type 00 class 0x0c0310
    [    0.111475] pci 0000:00:03.2: reg 0x10: [mem 0xeb003000-0xeb003fff]
    [    0.111623] pci 0000:00:03.2: System wakeup disabled by ACPI
    [    0.111734] pci 0000:00:03.3: [1039:7002] type 00 class 0x0c0320
    [    0.111760] pci 0000:00:03.3: reg 0x10: [mem 0xeb004000-0xeb004fff]
    [    0.111850] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
    [    0.112045] pci 0000:00:0f.0: [10ec:8139] type 00 class 0x020000
    [    0.112070] pci 0000:00:0f.0: reg 0x10: [io  0xe000-0xe0ff]
    [    0.112083] pci 0000:00:0f.0: reg 0x14: [mem 0xeb005000-0xeb0050ff]
    [    0.112169] pci 0000:00:0f.0: supports D1 D2
    [    0.112173] pci 0000:00:0f.0: PME# supported from D1 D2 D3hot D3cold
    [    0.112437] pci 0000:01:00.0: [1002:5964] type 00 class 0x030000
    [    0.112464] pci 0000:01:00.0: reg 0x10: [mem 0xd8000000-0xdfffffff pref]
    [    0.112476] pci 0000:01:00.0: reg 0x14: [io  0xc000-0xc0ff]
    [    0.112488] pci 0000:01:00.0: reg 0x18: [mem 0xe9000000-0xe900ffff]
    [    0.112521] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
    [    0.112565] pci 0000:01:00.0: supports D1 D2
    [    0.112661] pci 0000:01:00.1: [1002:5d44] type 00 class 0x038000
    [    0.112682] pci 0000:01:00.1: reg 0x10: [mem 0xe0000000-0xe7ffffff pref]
    [    0.112695] pci 0000:01:00.1: reg 0x14: [mem 0xe9010000-0xe901ffff]
    [    0.112764] pci 0000:01:00.1: supports D1 D2
    [    0.112888] pci 0000:00:01.0: PCI bridge to [bus 01]
    [    0.112896] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
    [    0.112904] pci 0000:00:01.0:   bridge window [mem 0xe8000000-0xe9ffffff]
    [    0.112910] pci 0000:00:01.0:   bridge window [mem 0xd8000000-0xe7ffffff pref]
    [    0.112924] pci_bus 0000:00: on NUMA node 0
    [    0.113106] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
    [    0.113252] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
    [    0.113436] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
    [    0.113579] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    [    0.113723] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
    [    0.113876] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
    [    0.114026] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
    [    0.114178] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
    [    0.114969] ACPI: Enabled 2 GPEs in block 00 to 0F
    [    0.115202] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [    0.115209] vgaarb: loaded
    [    0.115211] vgaarb: bridge control possible 0000:01:00.0
    [    0.115301] PCI: Using ACPI for IRQ routing
    [    0.115309] PCI: pci_cache_line_size set to 64 bytes
    [    0.115368] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
    [    0.115373] e820: reserve RAM buffer [mem 0x1fff0000-0x1fffffff]
    [    0.115616] NetLabel: Initializing
    [    0.115622] NetLabel:  domain hash size = 128
    [    0.115624] NetLabel:  protocols = UNLABELED CIPSOv4
    [    0.115655] NetLabel:  unlabeled traffic allowed by default
    [    0.115740] Switched to clocksource refined-jiffies
    [    0.129136] pnp: PnP ACPI init
    [    0.129177] ACPI: bus type PNP registered
    [    0.129597] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    [    0.130147] system 00:01: [io  0x04d0-0x04d1] has been reserved
    [    0.130157] system 00:01: [io  0x0290-0x029f] has been reserved
    [    0.130162] system 00:01: [io  0x0800-0x0805] has been reserved
    [    0.130170] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.130207] pnp 00:02: [dma 4]
    [    0.130277] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [    0.130404] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
    [    0.130503] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
    [    0.130621] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
    [    0.130910] pnp 00:06: [dma 2]
    [    0.131028] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
    [    0.131556] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
    [    0.132089] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
    [    0.132675] pnp 00:09: [dma 3]
    [    0.132810] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
    [    0.133009] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
    [    0.133074] pnp: PnP ACPI: found 11 devices
    [    0.133080] ACPI: bus type PNP unregistered
    [    0.174911] Switched to clocksource acpi_pm
    [    0.174951] pci 0000:00:02.3: BAR 6: assigned [mem 0x20000000-0x2001ffff pref]
    [    0.174962] pci 0000:01:00.0: BAR 6: assigned [mem 0xe8000000-0xe801ffff pref]
    [    0.174969] pci 0000:00:01.0: PCI bridge to [bus 01]
    [    0.174975] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
    [    0.174983] pci 0000:00:01.0:   bridge window [mem 0xe8000000-0xe9ffffff]
    [    0.174989] pci 0000:00:01.0:   bridge window [mem 0xd8000000-0xe7ffffff pref]
    [    0.174999] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
    [    0.175003] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
    [    0.175007] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
    [    0.175010] pci_bus 0000:01: resource 1 [mem 0xe8000000-0xe9ffffff]
    [    0.175013] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xe7ffffff pref]
    [    0.175076] NET: Registered protocol family 2
    [    0.175437] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
    [    0.175457] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
    [    0.175477] TCP: Hash tables configured (established 4096 bind 4096)
    [    0.175521] TCP: reno registered
    [    0.175531] UDP hash table entries: 256 (order: 1, 8192 bytes)
    [    0.175541] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    [    0.175688] NET: Registered protocol family 1
    [    0.397112] pci 0000:01:00.0: Boot video device
    [    0.397124] PCI: CLS 32 bytes, default 64
    [    0.397238] Unpacking initramfs...
    [    0.517648] Freeing initrd memory: 3204K (defe2000 - df303000)
    [    0.517809] apm: BIOS not found.
    [    0.517886] Scanning for low memory corruption every 60 seconds
    [    0.518572] futex hash table entries: 512 (order: 3, 32768 bytes)
    [    0.533762] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [    0.536896] zbud: loaded
    [    0.537090] VFS: Disk quotas dquot_6.5.2
    [    0.537200] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [    0.537623] msgmni has been set to 996
    [    0.537789] Key type big_key registered
    [    0.538268] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [    0.538390] io scheduler noop registered
    [    0.538397] io scheduler deadline registered
    [    0.538493] io scheduler cfq registered (default)
    [    0.538712] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [    0.538757] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [    0.538862] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
    [    0.538866] vesafb: scrolling: redraw
    [    0.538870] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
    [    0.539366] vesafb: framebuffer at 0xd8000000, mapped to 0xe0800000, using 5120k, total 5120k
    [    0.646493] Console: switching to colour frame buffer device 160x64
    [    0.753177] fb0: VESA VGA frame buffer device
    [    0.753268] GHES: HEST is not enabled!
    [    0.753308] isapnp: Scanning for PnP cards...
    [    1.066034] isapnp: No Plug & Play device found
    [    1.066191] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [    1.086839] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
    [    1.107535] 00:08: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
    [    1.108786] rtc_cmos 00:03: RTC can wake from S4
    [    1.109049] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    [    1.109090] rtc_cmos 00:03: alarms up to one year, 242 bytes nvram
    [    1.109177] ledtrig-cpu: registered to indicate activity on CPUs
    [    1.109384] TCP: cubic registered
    [    1.109696] NET: Registered protocol family 10
    [    1.110235] NET: Registered protocol family 17
    [    1.110539] Using IPI No-Shortcut mode
    [    1.110887] registered taskstats version 1
    [    1.111374]   Magic number: 14:861:337
    [    1.111396] tty tty58: hash matches
    [    1.111477] rtc_cmos 00:03: setting system clock to 2014-05-12 16:19:42 UTC (1399911582)
    [    1.111561] PM: Hibernation image not present or could not be loaded.
    [    1.112337] Freeing unused kernel memory: 568K (c160f000 - c169d000)
    [    1.112374] Write protecting the kernel text: 4448k
    [    1.112407] Write protecting the kernel read-only data: 1284k
    [    1.132515] random: systemd-tmpfile urandom read with 0 bits of entropy available
    [    1.140455] systemd-udevd[40]: starting version 212
    [    1.240350] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    [    1.240356] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
    [    1.240605] serio: i8042 KBD port at 0x60,0x64 irq 1
    [    1.249861] Floppy drive(s): fd0 is 1.44M
    [    1.263944] FDC 0 is a post-1991 82077
    [    1.295454] SCSI subsystem initialized
    [    1.312358] ACPI: bus type USB registered
    [    1.312456] usbcore: registered new interface driver usbfs
    [    1.312497] usbcore: registered new interface driver hub
    [    1.316781] usbcore: registered new device driver usb
    [    1.317900] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    1.318313] ehci-pci: EHCI PCI platform driver
    [    1.319280] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    1.319680] ohci-pci: OHCI PCI platform driver
    [    1.327015] libata version 3.00 loaded.
    [    1.363547] firewire_ohci 0000:00:02.3: added OHCI v1.0 device as card 0, 4 IR + 6 IT contexts, quirks 0x0
    [    1.364218] ehci-pci 0000:00:03.3: EHCI Host Controller
    [    1.364240] ehci-pci 0000:00:03.3: new USB bus registered, assigned bus number 1
    [    1.364332] ehci-pci 0000:00:03.3: irq 23, io mem 0xeb004000
    [    1.373423] ehci-pci 0000:00:03.3: USB 2.0 started, EHCI 1.00
    [    1.373943] hub 1-0:1.0: USB hub found
    [    1.373981] hub 1-0:1.0: 6 ports detected
    [    1.375001] ohci-pci 0000:00:03.0: OHCI PCI host controller
    [    1.375023] ohci-pci 0000:00:03.0: new USB bus registered, assigned bus number 2
    [    1.375100] ohci-pci 0000:00:03.0: irq 20, io mem 0xeb001000
    [    1.429251] hub 2-0:1.0: USB hub found
    [    1.429296] hub 2-0:1.0: 2 ports detected
    [    1.429636] pata_sis 0000:00:02.5: version 0.5.2
    [    1.429683] pata_sis 0000:00:02.5: SiS 962/963 MuTIOL IDE UDMA133 controller
    [    1.437030] scsi0 : pata_sis
    [    1.443413] scsi1 : pata_sis
    [    1.443626] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
    [    1.443633] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
    [    1.444146] ohci-pci 0000:00:03.1: OHCI PCI host controller
    [    1.444168] ohci-pci 0000:00:03.1: new USB bus registered, assigned bus number 3
    [    1.444242] ohci-pci 0000:00:03.1: irq 21, io mem 0xeb002000
    [    1.453047] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [    1.499191] hub 3-0:1.0: USB hub found
    [    1.499232] hub 3-0:1.0: 2 ports detected
    [    1.499756] ohci-pci 0000:00:03.2: OHCI PCI host controller
    [    1.499778] ohci-pci 0000:00:03.2: new USB bus registered, assigned bus number 4
    [    1.499856] ohci-pci 0000:00:03.2: irq 22, io mem 0xeb003000
    [    1.520042] tsc: Refined TSC clocksource calibration: 2625.851 MHz
    [    1.552850] hub 4-0:1.0: USB hub found
    [    1.552893] hub 4-0:1.0: 2 ports detected
    [    1.603787] ata1.00: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133
    [    1.603796] ata1.00: 160086528 sectors, multi 16: LBA
    [    1.617092] ata1.00: configured for UDMA/133
    [    1.617362] scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6Y080L0   YAR4 PQ: 0 ANSI: 5
    [    1.733392] usb 1-4: new high-speed USB device number 3 using ehci-pci
    [    1.861345] hub 1-4:1.0: USB hub found
    [    1.861759] hub 1-4:1.0: 4 ports detected
    [    1.863604] firewire_core 0000:00:02.3: created device fw0: GUID 00000d610024cc70, S400
    [    1.906938] ata2.00: ATAPI: HL-DT-STDVD-ROM GDR8162B, 0017, max UDMA/66
    [    1.906951] ata2.01: ATAPI: LITE-ON DVD+RW LDW-401S, E9S3, max UDMA/33
    [    1.920261] ata2.00: configured for UDMA/66
    [    1.933596] ata2.01: configured for UDMA/33
    [    1.942307] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVD-ROM GDR8162B 0017 PQ: 0 ANSI: 5
    [    1.943253] scsi 1:0:1:0: CD-ROM            LITE-ON  DVD+RW LDW-401S  E9S3 PQ: 0 ANSI: 5
    [    1.968652] sd 0:0:0:0: [sda] 160086528 512-byte logical blocks: (81.9 GB/76.3 GiB)
    [    1.968905] sd 0:0:0:0: [sda] Write Protect is off
    [    1.968913] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    1.969022] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    1.979035] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
    [    1.979044] cdrom: Uniform CD-ROM driver Revision: 3.20
    [    1.979566] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [    1.991510] sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
    [    1.991993] sr 1:0:1:0: Attached scsi CD-ROM sr1
    [    2.009048]  sda: sda1 sda2 sda3 < sda5 sda6 >
    [    2.010569] sd 0:0:0:0: [sda] Attached SCSI disk
    [    2.143550] usb 2-1: new low-speed USB device number 2 using ohci-pci
    [    2.345412] hidraw: raw HID events driver (C) Jiri Kosina
    [    2.358710] usbcore: registered new interface driver usbhid
    [    2.358717] usbhid: USB HID core driver
    [    2.361517] input: HID 04d9:048e as /devices/pci0000:00/0000:00:03.0/usb2/2-1/2-1:1.0/0003:04D9:048E.0001/input/input1
    [    2.361837] hid-generic 0003:04D9:048E.0001: input,hidraw0: USB HID v1.10 Mouse [HID 04d9:048e] on usb-0000:00:03.0-1/input0
    [    2.407135] usb 1-4.4: new high-speed USB device number 4 using ehci-pci
    [    2.500521] usb-storage 1-4.4:1.0: USB Mass Storage device detected
    [    2.500774] scsi2 : usb-storage 1-4.4:1.0
    [    2.502128] usbcore: registered new interface driver usb-storage
    [    2.520155] Switched to clocksource tsc
    [    3.175339] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
    [    3.505428] scsi 2:0:0:0: Direct-Access              USB DISK 2.0     PMAP PQ: 0 ANSI: 4
    [    3.507279] sd 2:0:0:0: [sdb] 15273600 512-byte logical blocks: (7.82 GB/7.28 GiB)
    [    3.508020] sd 2:0:0:0: [sdb] Write Protect is off
    [    3.508029] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
    [    3.508769] sd 2:0:0:0: [sdb] No Caching mode page found
    [    3.509434] sd 2:0:0:0: [sdb] Assuming drive cache: write through
    [    3.513361] random: nonblocking pool is initialized
    [    3.514387] sd 2:0:0:0: [sdb] No Caching mode page found
    [    3.515049] sd 2:0:0:0: [sdb] Assuming drive cache: write through
    [    3.517301]  sdb: sdb1 sdb2
    [    3.520401] sd 2:0:0:0: [sdb] No Caching mode page found
    [    3.521391] sd 2:0:0:0: [sdb] Assuming drive cache: write through
    [    3.522153] sd 2:0:0:0: [sdb] Attached SCSI removable disk
    [    3.928631] systemd[1]: systemd 212 running in system mode. (+PAM -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ +SECCOMP -APPARMOR)
    [    3.929099] systemd[1]: Detected architecture 'x86'.
    [    3.937340] systemd[1]: Set hostname to <archlinux-desktop>.
    [    5.174046] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
    [    5.175398] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [    5.175650] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [    5.175707] systemd[1]: Starting Remote File Systems.
    [    5.175758] systemd[1]: Reached target Remote File Systems.
    [    5.175820] systemd[1]: Starting Encrypted Volumes.
    [    5.175867] systemd[1]: Reached target Encrypted Volumes.
    [    5.175954] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [    5.176267] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [    5.176359] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [    5.176504] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [    5.176555] systemd[1]: Starting Swap.
    [    5.176602] systemd[1]: Reached target Swap.
    [    5.176652] systemd[1]: Expecting device dev-disk-by\x2duuid-4e223aa4\x2d3894\x2d41bc\x2db82c\x2d955ae89b3eb2.device...
    [    5.176796] systemd[1]: Expecting device dev-disk-by\x2duuid-b7ca07ac\x2d5ceb\x2d40d6\x2db55c\x2ded651e31f452.device...
    [    5.176850] systemd[1]: Starting Root Slice.
    [    5.208364] systemd[1]: Created slice Root Slice.
    [    5.208422] systemd[1]: Starting User and Session Slice.
    [    5.209187] systemd[1]: Created slice User and Session Slice.
    [    5.209244] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [    5.209403] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [    5.209451] systemd[1]: Starting Delayed Shutdown Socket.
    [    5.209585] systemd[1]: Listening on Delayed Shutdown Socket.
    [    5.209635] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [    5.209740] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [    5.209789] systemd[1]: Starting LVM2 metadata daemon socket.
    [    5.209917] systemd[1]: Listening on LVM2 metadata daemon socket.
    [    5.209982] systemd[1]: Starting udev Kernel Socket.
    [    5.210180] systemd[1]: Listening on udev Kernel Socket.
    [    5.210249] systemd[1]: Starting udev Control Socket.
    [    5.210366] systemd[1]: Listening on udev Control Socket.
    [    5.210428] systemd[1]: Starting Journal Socket.
    [    5.210621] systemd[1]: Listening on Journal Socket.
    [    5.210717] systemd[1]: Starting System Slice.
    [    5.211489] systemd[1]: Created slice System Slice.
    [    5.211583] systemd[1]: Started File System Check on Root Device.
    [    5.211623] systemd[1]: Starting system-systemd\x2dfsck.slice.
    [    5.212405] systemd[1]: Created slice system-systemd\x2dfsck.slice.
    [    5.212459] systemd[1]: Mounting Temporary Directory...
    [    5.239615] systemd[1]: Starting system-getty.slice.
    [    5.240697] systemd[1]: Created slice system-getty.slice.
    [    5.240838] systemd[1]: Mounting Debug File System...
    [    5.279740] systemd[1]: Started Load Kernel Modules.
    [    5.296122] systemd[1]: Starting Apply Kernel Variables...
    [    5.297870] systemd[1]: Starting Setup Virtual Console...
    [    5.299634] systemd[1]: Mounting POSIX Message Queue File System...
    [    5.301446] systemd[1]: Mounting Configuration File System...
    [    5.344473] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    [    5.346155] systemd[1]: Mounted FUSE Control File System.
    [    5.346271] systemd[1]: Mounting Huge Pages File System...
    [    5.370976] systemd[1]: Starting Set Up Additional Binary Formats...
    [    5.372655] systemd[1]: Starting udev Coldplug all Devices...
    [    5.374485] systemd[1]: Starting Journal Service...
    [    5.376393] systemd[1]: Started Journal Service.
    [    5.926924] systemd-udevd[120]: starting version 212
    [    6.249395] EXT4-fs (sda5): re-mounted. Opts: data=ordered
    [    7.438155] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
    [    7.438167] ACPI: Power Button [PWRB]
    [    7.438350] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [    7.438360] ACPI: Power Button [PWRF]
    [    7.585684] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [    7.625549] parport_pc 00:09: reported by Plug and Play ACPI
    [    7.625639] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
    [    7.658989] Linux agpgart interface v0.103
    [    7.722256] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x1400
    [    7.809304] [drm] Initialized drm 1.1.0 20060810
    [    7.958917] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
    [    7.958969] 8139cp 0000:00:0f.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
    [    7.980566] mousedev: PS/2 mouse device common for all mice
    [    7.980931] 8139too: 8139too Fast Ethernet driver 0.9.28
    [    7.984132] 8139too 0000:00:0f.0 eth0: RealTek RTL8139 at 0xe1724000, 00:0d:61:22:1d:3c, IRQ 16
    [    7.985877] agpgart-sis 0000:00:00.0: SiS chipset [1039/0648]
    [    8.016252] agpgart-sis 0000:00:00.0: AGP aperture is 128M @ 0xd0000000
    [    8.116064] input: PC Speaker as /devices/platform/pcspkr/input/input4
    [    8.251837] microcode: CPU0 sig=0xf29, pf=0x4, revision=0x11
    [    8.261786] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [    8.279526] [drm] radeon kernel modesetting enabled.
    [    8.279631] checking generic (d8000000 500000) vs hw (d8000000 8000000)
    [    8.279639] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
    [    8.279680] Console: switching to colour dummy device 80x25
    [    8.301981] [drm] initializing kernel modesetting (RV280 0x1002:0x5964 0x1458:0x4032).
    [    8.302015] [drm] register mmio base: 0xE9000000
    [    8.302018] [drm] register mmio size: 65536
    [    8.302188] agpgart-sis 0000:00:00.0: AGP 3.5 bridge
    [    8.302214] agpgart-sis 0000:00:00.0: putting AGP V3 device at 0000:00:00.0 into 8x mode
    [    8.302220] agpgart-sis 0000:00:00.0: SiS delay workaround: giving bridge time to recover
    [    8.313685] agpgart-sis 0000:00:00.0: putting AGP V3 device at 0000:01:00.0 into 8x mode
    [    8.313704] radeon 0000:01:00.0: GTT: 128M 0xD0000000 - 0xD7FFFFFF
    [    8.313711] [drm] Generation 2 PCI interface, using max accessible memory
    [    8.313718] radeon 0000:01:00.0: VRAM: 128M 0x00000000D8000000 - 0x00000000DFFFFFFF (128M used)
    [    8.313742] [drm] Detected VRAM RAM=128M, BAR=128M
    [    8.313746] [drm] RAM width 64bits DDR
    [    8.318743] [TTM] Zone  kernel: Available graphics memory: 255446 kiB
    [    8.318750] [TTM] Initializing pool allocator
    [    8.318762] [TTM] Initializing DMA pool allocator
    [    8.318815] [drm] radeon: 128M of VRAM memory ready
    [    8.318821] [drm] radeon: 128M of GTT memory ready.
    [    8.321257] radeon 0000:01:00.0: WB disabled
    [    8.321270] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000d0000000 and cpu addr 0xe07fe000
    [    8.321276] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [    8.321278] [drm] Driver supports precise vblank timestamp query.
    [    8.321311] [drm] radeon: irq initialized.
    [    8.321340] [drm] Loading R200 Microcode
    [    8.337126] ppdev: user-space parallel port driver
    [    8.350382] [drm] radeon: ring at 0x00000000D0001000
    [    8.350414] [drm] ring test succeeded in 1 usecs
    [    8.350728] [drm] ib test succeeded in 0 usecs
    [    8.351298] [drm] Radeon Display Connectors
    [    8.351305] [drm] Connector 0:
    [    8.351307] [drm]   VGA-1
    [    8.351311] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
    [    8.351313] [drm]   Encoders:
    [    8.351315] [drm]     CRT1: INTERNAL_DAC1
    [    8.351317] [drm] Connector 1:
    [    8.351319] [drm]   SVIDEO-1
    [    8.351321] [drm]   Encoders:
    [    8.351322] [drm]     TV1: INTERNAL_DAC2
    [    8.481905] [drm] fb mappable at 0xD8040000
    [    8.481912] [drm] vram apper at 0xD8000000
    [    8.481914] [drm] size 8294400
    [    8.481916] [drm] fb depth is 24
    [    8.481918] [drm]    pitch is 7680
    [    8.482299] fbcon: radeondrmfb (fb0) is primary device
    [    8.535240] Console: switching to colour frame buffer device 240x67
    [    8.614028] systemd-udevd[135]: renamed network interface eth0 to enp0s15
    [    8.614028] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
    [    8.614034] radeon 0000:01:00.0: registered panic notifier
    [    8.614052] [drm] Initialized radeon 2.37.0 20080528 for 0000:01:00.0 on minor 0
    [    9.523376] intel8x0_measure_ac97_clock: measured 52701 usecs (2535 samples)
    [    9.523383] intel8x0: clocking to 48000
    [   10.264223] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: data=ordered
    [   10.529887] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: data=ordered
    [   10.688972] systemd-journald[112]: Received request to flush runtime journal from PID 1
    [   11.588053] 8139too 0000:00:0f.0 enp0s15: link up, 100Mbps, full-duplex, lpa 0x45E1
    [  130.919975] ISO 9660 Extensions: RRIP_1991A
    [ 1052.318149] perf samples too long (2508 > 2500), lowering kernel.perf_event_max_sample_rate to 50100
    [ 2771.015182] systemd[1]: Starting Journal Service...
    [ 2773.625872] systemd-journald[112]: Received SIGTERM from PID 1 (systemd).
    [ 2773.907874] systemd[1]: Unit systemd-journald.service entered failed state.
    [ 2773.921616] systemd[1]: systemd-journald.service has no holdoff time, scheduling restart.
    [ 2773.922423] systemd[1]: Stopping Journal Service...
    [ 2773.922521] systemd[1]: Starting Journal Service...
    [ 2773.924633] systemd[1]: Started Journal Service.
    [ 2774.243766] systemd-journald[860]: Received request to flush runtime journal from PID 1
    [ 2848.068160] perf samples too long (5003 > 4990), lowering kernel.perf_event_max_sample_rate to 25200
    [ 2932.591054] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
    [ 2932.591064] Disabling lock debugging due to kernel taint
    [ 2932.632805] <6>[fglrx] Maximum main memory to use for locked dma buffers: 427 MBytes.
    [ 2932.633428] <3>[fglrx:firegl_init_device_list] *ERROR* No supported display adapters were found
    [ 2932.633438] <3>[fglrx:firegl_init_module] *ERROR* firegl_init_devices failed
    [ 3146.754229] <6>[fglrx] Maximum main memory to use for locked dma buffers: 427 MBytes.
    [ 3146.754491] <3>[fglrx:firegl_init_device_list] *ERROR* No supported display adapters were found
    [ 3146.754495] <3>[fglrx:firegl_init_module] *ERROR* firegl_init_devices failed
    [ 3387.964180] <6>[fglrx] Maximum main memory to use for locked dma buffers: 427 MBytes.
    [ 3387.964434] <3>[fglrx:firegl_init_device_list] *ERROR* No supported display adapters were found
    [ 3387.964440] <3>[fglrx:firegl_init_module] *ERROR* firegl_init_devices failed
    I have already seen this link and he explain that installing from AUR has resolved his problem, but the wiki says:
    The second method you can use is the AUR; PKGBUILDs offered here are also made by Vi0L0 and are the same he uses to built packages for his repository. Lastly, you can install the driver directly from AMD.
    My aim is to install Catalyst
    Thank you for your help

    I don't think that card is supported by AMD Catalyst anymore, even by the legacy branch...

  • OpenCL problems on macbook pro

    Hi everyone,
    I'm really excited about OpenCL but there are some problems which really get on my nerves. One problem is that most of the code my colleague wrote (which works perfectly on his NVIDIA card with linux) doesn't work on my machine. This wouldn't be such a problem if there were nice error messages. But the only thing I get is:
    cvmsErrorCompilerFailure: LLVM compiler has failed to compile a function.
    If I look at the log it tells me:
    Running pass 'AMDIL DAG->DAG Pattern Instruction Selection' on function '@test_kernel'
    abort() called
    Thread 0 Crashed:  Dispatch queue: com.apple.main-thread
    0   libSystem.B.dylib             0x00007fff85d1b5d6 __kill + 10
    1   libSystem.B.dylib             0x00007fff85dbbc7f __abort + 103
    2   libSystem.B.dylib             0x00007fff85dbbced abort_report_np + 0
    3   AMDil.dylib                   0x000000010273b660 (anonymous namespace)::AMDILDAGToDAGISel::Select_ISD_SRL_v2i64(llvm::SDValue const& + 0
    4   AMDil.dylib                   0x000000010274bc96 (anonymous namespace)::AMDILDAGToDAGISel::SelectCode(llvm::SDValue) + 742
    5   AMDil.dylib                   0x00000001027526d2 (anonymous namespace)::AMDILDAGToDAGISel::InstructionSelect() + 210
    Is it just one of many "known bugs" and if yes is there any way to get a newer version of the AMD driver on to my macbook? Or do I have to wait untill apple fixes it??
    Thanks,
    Nicholas

    With the Finder active, press the following key combinations, in this order:
    Shift-Command-H
    Command-3
    Command-I
    The Info window for your home folder will open. Click the lock icon to authenticate. In the Sharing & Permissions section, you should have read & write access. If not, make it so. Select "Apply to enclosed items" from the action (gear icon) menu.

  • Installing AMD Video Drivers - Windows 8.1 (Step-By-Step Tutorial)

    I am currently in the process of installing the latest AMD Video Drivers for Windows 8.1 (64-bit) on a Bootcamp partition.  I previously had three ATI Radeon HD2600XT Graphics cards (in CrossFire) installed in a 2008 Apple Mac Pro.
    I've run into several problems with trying to remove the Radeon HD2600XT graphics cards and install the latest drivers (for the Radeon R9 290 graphics card) in Windows 8.1 (64-bit), so I am creating this to be used as tutorial for others experiencing similar problems.
    1) First I created a new/clean system restore point in Windows 8.1 prior to starting this.
          Instructions can be found here:  http://www.intowindows.com/how-to-create-restore-point-in-windows-8-1/
    2) Second, I manually tried removing/uninstalling the AMD Software from add/remove programs in Windows 8.1 (Control Panel)
          In Computer Control Panel, select "uninstall a program" 
          Select AMD Install Manager (and any Catalyst Software) and remove/uninstall the software (choose "express uninstall all AMD software").
          Be sure to uninstall the AMD Install Manager.
    3) In my system, the hardware drivers for the three Radeon XT2600 graphics cards were not properly removed, and the drivers for the Radeon R9 290 were not properly installed.
    4) I tried running the AMD Driver Autodetect Tool
          It stated "We were unable to find your product or OS" (and failed to download or install any drivers)
          AMD Driver Autodetect displayed the following information:
    Graphics hardware:  0x1002 - 0x9588 PCIE
    Operating system: Windows 8.1 64-bit
    5) Since the latest software/drivers were not found with the AMD Driver Autodetect, I decided to manually download the latest Graphics card drivers from the AMD website for my graphics card and for my operating system (Windows 8.1 64-bit).  I created a folder called "C:\Drivers\AMD" and downloaded the latest AMD Graphics card drivers (Catalyst Software Suite 14.9) to that folder and unzipped the AMD drivers installation file.  I unzipped the file which included the following drivers/files:
          Catalyst Software Suite 14.9 includes the following files:
                AMD Display Driver ver. 14.301.1001
                              OpenCL(tm) Driver
                              Catalyst Control Center
                              HydraVision
    6) I downloaded and unzipped DDU v13.5.1.3 (downloaded from 3D Guru)
        I created a folder called "C:\Drivers\DDUv13.5.1.3" and unzipped the DDU installation files to that folder
    7) I ran DDU v13.5.1.3 (downloaded from 3D Guru)
          It displayed the following information:
    DDU Version:13.5.1.3
    GPU # 0000 Detected : ATI Radeon HD 2600 XT (Microsoft Corporation - WDDM v1.1)
    GPU DeviceId : pci\ven_1002&dev_9588
    Detected Driver(s) Version(s) : 8.97.10.6
    INF : oem55.inf
    INF Section : ati2mtag_RV630
    GPU # 0001 Detected : ATI Radeon HD 2600 XT (Microsoft Corporation - WDDM v1.1)
    GPU DeviceId : pci\ven_1002&dev_9588
    Detected Driver(s) Version(s) : 8.97.10.6
    INF : oem55.inf
    INF Section : ati2mtag_RV630
    GPU # 0002 Detected : AMD Radeon R9 200 Series
    GPU DeviceId : pci\ven_1002&dev_67b1
    Detected Driver(s) Version(s) : 13.251.9001.1001
    INF : oem63.inf
    INF Section : ati2mtag_Hawaii
    5) Based on the output above, it seems that some extremely old drivers are currently installed (v13.251.9001.1001), and I need to remove the old drivers for the hardware above, and try to install the latest AMD drivers (v14.9)
    6) I rebooted the computer into Windows 8.1 "Safe Mode". 
        Instructions can be found here:  http://www.7tutorials.com/5-ways-boot-safe-mode-windows-8-windows-81
    7) I went to the folder called "C:\Drivers\DDUv13.5.1.3" and ran DDU v13.5.1.3 and selected "Clean and restart" (in DDU 13.5.1.3) to remove ALL of the existing AMD drivers and to restart/reboot the computer.
      - After removing the current display drivers (in safe mode) with DDU v13.5.1.3 and after the system rebooted, I then tried to perform a "clean install" of the latest AMD drivers (v14.9)
    8) Now perform a "Clean Install" of the new AMD graphics drivers.  Steps for performing a "clean install" (from AMD's website) are listed below:
    To perform a 'clean install' of AMD graphics drivers:
    You should make a system restore point before attempting, just in case
    1. IMPORTANT: All Windows Updates should be current, including the 'optional/suggested' updates
    2. IMPORTANT: Disable all anti-virus/ad blockers/anti-malware/ anti-anything before trying to install
    3. IMPORTANT: Netframework is required and must be the latest version. (from Windows Update)
    Download the drivers for your computer to the desktop. Follow steps 1-5 ( http://support.amd.com/en-us/download ).
    Do not use 'auto-detect and install (it might not detect your graphics card or best drivers).
    Delete existing drivers from your computer:
    In computer control panel select 'uninstall a program'
    For computers with Intel processors:
    Select AMD install manager and choose 'express uninstall all AMD software'
    Including the install manager.
    For computers with AMD processors:
    Select AMD install manager and 'custom uninstall' the graphics drivers and CCC only.
    Reboot into 'safe mode'
    In safe mode run Guru 3D's DDU
    Reboot
    Install the new driver suite.
    9) I went to the folder called "C:\Drivers\AMD\AMD-Catalyst-14-9-win7-win8.1-64Bit-dd-ccc-whql" and ran setup.exe  (Catalyst Install Manager)
         I selected "Express Install" as the default installation (highly recommended).
    10) Rebooted the system after the Catalyst software and video driver installation.

    In the end, I found out that the latest/newest Radeon drivers do not support the older Apple Radeon 2600XT graphics cards, so I was forced to remove the older Radeon 2600XT graphics cards from the system (so the newest/latest Radeon Catalyst Drivers would work).  I was then able to boot directly into Windows 8.1 Pro, and the AMD Catalyst software and AMD Catalyst Drivers worked perfectly with the R9 290 graphics card (in Windows 8.1 Pro).
    The only problem is that the AMD R9 290 is not supported in OS X, and now I can't boot directly into OS X because the Apple OS X graphics card drivers are missing and don't exist.  Apple hasn't added AMD R9 290 graphics card support to the latest version of Apple OS X 10.10 Yosemite (or 10.9).
    I posted a thread here about needing the AMD R9 290 graphics display drivers, but Apple still hasn't added the latest AMD Radeon R9 290 graphics card drivers support to the latest Apple Mac OS X 10.10.1 Yosemite operating system.
    Another big Apple fail! 
    So now we have a wonderful new high-end AMD R9 290 graphics card and all we can do is use our Apple Mac Pro computers as Windows 8.1 Pro computers, because Apple has not updated their Apple OS X operating system to support the newest/latest AMD R9 290 graphics cards.  (So we're stuck with using our Apple Mac Pro as a Windows 8.1 Pro computer) because Apple refuses to add the newest/latest hardware drivers to their latest Apple OS X operating system.  Anytime you purchase an Apple computer you are stuck using really old hardware because Apple fails to update their operating system with the newest/latest hardware drivers for the latest AMD R9 290 graphics card hardware.
    The only way to use the latest/newest hardware is with a Microsoft Windows 8.1 Pro computer.  Hopefully Apple will get this fixed immediately, but it's already been close to a year now and Apple still hasn't fixed the problem.
    We tried to contact Sapphire, and AMD, but both of them have said that it's a problem with Apple's Mac OS X operating system, and that only Apple can fix the problem and add the proper hardware drivers to their operating system.

  • CS6 Not Responding - AMD Radeon 6630m issues

    I have been faced with an increasing number of CS6 freezes, primarliy when in the middle of some quick select editing on raw files, which appear to be the video card. Windows informs me that the "Display Driver AMD stopped responding and recovered" in the windows task bar. After this message shows Photoshop is frozen, and listed as not responding in task manager at which point I have to kill the process. Are there any known compatibility issues with this video card and\or drivers and Photoshop? I have the latest driver from HP (this is an Envy 14), which had the version 9.0.0.0 driver from AMD. I tried the latest beta drivers from AMDs site and it gave me an error saying that the hardware was not supported and to use the manufacturer provided drivers.
    Adobe Photoshop Version: 13.0.1 (13.0.1.2 20130522.r.24 2013/05/22:21:00:00) x64
    Operating System: Windows NT
    Version: 6.2
    System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
    Physical processor count: 4
    Logical processor count: 8
    Processor speed: 1995 MHz
    Built-in memory: 8140 MB
    Free memory: 6135 MB
    Memory available to Photoshop: 7173 MB
    Memory used by Photoshop: 60 %
    Image tile size: 128K
    Image cache levels: 4
    The GPU Sniffer crashed on 8/13/2013 at 9:21:27 PM
    OpenGL Drawing: Enabled.
    OpenGL Drawing Mode: Basic
    OpenGL Allow Normal Mode: True.
    OpenGL Allow Advanced Mode: True.
    OpenGL Allow Old GPUs: Not Detected.
    Video Card Vendor: ATI Technologies Inc.
    Video Card Renderer: Radeon (TM) HD 6630M
    Display: 1
    Display Bounds:=  top: 0, left: 0, bottom: 1050, right: 1680
    Video Card Number: 2
    Video Card: Intel(R) HD Graphics 3000
    OpenCL Unavailable
    Driver Version: 9.0.0.0
    Driver Date: 20120815000000.000000-000
    Video Card Driver: igdumd64.dll,igd10umd64.dll,igd10umd64.dll,igdumd32,igd10umd32,igd10umd32
    Video Mode: 1680 x 1050 x 4294967296 colors
    Video Card Caption: Intel(R) HD Graphics 3000
    Video Card Memory: 547968 MB
    Video Rect Texture Size: 16384
    Video Card Number: 1
    Video Card: Radeon (TM) HD 6630M
    OpenCL Unavailable
    Driver Version: 9.0.0.0
    Driver Date: 20120815000000.000000-000
    Video Card Driver: aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atiumd64.dll,atidxx64.d ll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll
    Video Mode:
    Video Card Caption: Radeon (TM) HD 6630M
    Video Card Memory: 547968 MB
    Video Rect Texture Size: 16384
    Serial number: 91198469304989699951
    Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
    Temporary file path: C:\Users\Kris\AppData\Local\Temp\
    Photoshop scratch has async I/O enabled
    Scratch volume(s):
      Startup, 465.7G, 54.7G free
    Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
    Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
    Additional Plug-ins folder: not set
    Installed components:
       A3DLIBS.dll   A3DLIB Dynamic Link Library   9.2.0.112  
       ACE.dll   ACE 2012/06/05-15:16:32   66.507768   66.507768
       adbeape.dll   Adobe APE 2012/01/25-10:04:55   66.1025012   66.1025012
       AdobeLinguistic.dll   Adobe Linguisitc Library   6.0.0  
       AdobeOwl.dll   Adobe Owl 2012/06/26-12:17:19   4.0.95   66.510504
       AdobePDFL.dll   PDFL 2011/12/12-16:12:37   66.419471   66.419471
       AdobePIP.dll   Adobe Product Improvement Program   6.0.0.1654  
       AdobeXMP.dll   Adobe XMP Core 2012/02/06-14:56:27   66.145661   66.145661
       AdobeXMPFiles.dll   Adobe XMP Files 2012/02/06-14:56:27   66.145661   66.145661
       AdobeXMPScript.dll   Adobe XMP Script 2012/02/06-14:56:27   66.145661   66.145661
       adobe_caps.dll   Adobe CAPS   6,0,29,0  
       AGM.dll   AGM 2012/06/05-15:16:32   66.507768   66.507768
       ahclient.dll    AdobeHelp Dynamic Link Library   1,7,0,56  
       aif_core.dll   AIF   3.0   62.490293
       aif_ocl.dll   AIF   3.0   62.490293
       aif_ogl.dll   AIF   3.0   62.490293
       amtlib.dll   AMTLib (64 Bit)   6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00)   1.000000
       ARE.dll   ARE 2012/06/05-15:16:32   66.507768   66.507768
       AXE8SharedExpat.dll   AXE8SharedExpat 2011/12/16-15:10:49   66.26830   66.26830
       AXEDOMCore.dll   AXEDOMCore 2011/12/16-15:10:49   66.26830   66.26830
       Bib.dll   BIB 2012/06/05-15:16:32   66.507768   66.507768
       BIBUtils.dll   BIBUtils 2012/06/05-15:16:32   66.507768   66.507768
       boost_date_time.dll   DVA Product   6.0.0  
       boost_signals.dll   DVA Product   6.0.0  
       boost_system.dll   DVA Product   6.0.0  
       boost_threads.dll   DVA Product   6.0.0  
       cg.dll   NVIDIA Cg Runtime   3.0.00007  
       cgGL.dll   NVIDIA Cg Runtime   3.0.00007  
       CIT.dll   Adobe CIT   2.0.5.19287   2.0.5.19287
       CoolType.dll   CoolType 2012/06/05-15:16:32   66.507768   66.507768
       data_flow.dll   AIF   3.0   62.490293
       dvaaudiodevice.dll   DVA Product   6.0.0  
       dvacore.dll   DVA Product   6.0.0  
       dvamarshal.dll   DVA Product   6.0.0  
       dvamediatypes.dll   DVA Product   6.0.0  
       dvaplayer.dll   DVA Product   6.0.0  
       dvatransport.dll   DVA Product   6.0.0  
       dvaunittesting.dll   DVA Product   6.0.0  
       dynamiclink.dll   DVA Product   6.0.0  
       ExtendScript.dll   ExtendScript 2011/12/14-15:08:46   66.490082   66.490082
       FileInfo.dll   Adobe XMP FileInfo 2012/01/17-15:11:19   66.145433   66.145433
       filter_graph.dll   AIF   3.0   62.490293
       hydra_filters.dll   AIF   3.0   62.490293
       icucnv40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615  
       icudt40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615  
       image_compiler.dll   AIF   3.0   62.490293
       image_flow.dll   AIF   3.0   62.490293
       image_runtime.dll   AIF   3.0   62.490293
       JP2KLib.dll   JP2KLib 2011/12/12-16:12:37   66.236923   66.236923
       libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)  
       libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0  
       LogSession.dll   LogSession   2.1.2.1640  
       mediacoreif.dll   DVA Product   6.0.0  
       MPS.dll   MPS 2012/02/03-10:33:13   66.495174   66.495174
       msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6910  
       msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       msvcp100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1  
       msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6910  
       msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       msvcr100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1  
       msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6910  
       msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       pdfsettings.dll   Adobe PDFSettings   1.04  
       Photoshop.dll   Adobe Photoshop CS6   CS6  
       Plugin.dll   Adobe Photoshop CS6   CS6  
       PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (64 bit)   3.0.0.383  
       PSArt.dll   Adobe Photoshop CS6   CS6  
       PSViews.dll   Adobe Photoshop CS6   CS6  
       SCCore.dll   ScCore 2011/12/14-15:08:46   66.490082   66.490082
       ScriptUIFlex.dll   ScriptUIFlex 2011/12/14-15:08:46   66.490082   66.490082
       tbb.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406  
       tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406  
       TfFontMgr.dll   FontMgr   9.3.0.113  
       TfKernel.dll   Kernel   9.3.0.113  
       TFKGEOM.dll   Kernel Geom   9.3.0.113  
       TFUGEOM.dll   Adobe, UGeom©   9.3.0.113  
       updaternotifications.dll   Adobe Updater Notifications Library   6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   6.0.0.24
       WRServices.dll   WRServices Friday January 27 2012 13:22:12   Build 0.17112   0.17112
       wu3d.dll   U3D Writer   9.3.0.113  
    Required plug-ins:
       Accented Edges 13.0
       Adaptive Wide Angle 13.0
       ADM 3.11x01
       Angled Strokes 13.0
       Average 13.0.1 (13.0.1.2 20130522.r.24 2013/05/22:21:00:00)
       Bas Relief 13.0
       BMP 13.0
       Camera Raw 8.1
       Camera Raw Filter 8.1
       Chalk & Charcoal 13.0
       Charcoal 13.0
       Chrome 13.0
       Cineon 13.0.1 (13.0.1.2 20130522.r.24 2013/05/22:21:00:00)
       Clouds 13.0.1 (13.0.1.2 20130522.r.24 2013/05/22:21:00:00)
       Collada 13.0.1 (13.0.1.2 20130522.r.24 2013/05/22:21:00:00)
       Color Halftone 13.0
       Colored Pencil 13.0
       CompuServe GIF 13.0
       Conté Crayon 13.0
       Craquelure 13.0
       Crop and Straighten Photos 13.0.1 (13.0.1.2 20130522.r.24 2013/05/22:21:00:00)
       Crop and Straighten Photos Filter 13.0
       Crosshatch 13.0
       Crystallize 13.0
       Cutout 13.0
       Dark Strokes 13.0
       De-Interlace 13.0
       Difference Clouds 13.0.1 (13.0.1.2 20130522.r.24 2013/05/22:21:00:00)
       Diffuse Glow 13.0
       Displace 13.0
       Dry Brush 13.0
       Eazel Acquire 13.0.1 (13.0.1.2 20130522.r.24 2013/05/22:21:00:00)
       Embed Watermark 4.0
       Extrude 13.0
       FastCore Routines 13.0.1 (13.0.1.2 20130522.r.24 2013/05/22:21:00:00)
       Fibers 13.0
       Film Grain 13.0
       Filter Gallery 13.0
       Fresco 13.0
       Glass 13.0
       Glowing Edges 13.0
       Grain 13.0
       Graphic Pen 13.0
       Halftone Pattern 13.0
       HDRMergeUI 13.0
       IFF Format 13.0
       Ink Outlines 13.0
       JPEG 2000 13.0
       Lens Blur 13.0
       Lens Correction 13.0
       Lens Flare 13.0
       Liquify 13.0
       Matlab Operation 13.0.1 (13.0.1.2 20130522.r.24 2013/05/22:21:00:00)
       Measurement Core 13.0.1 (13.0.1.2 20130522.r.24 2013/05/22:21:00:00)
       Mezzotint 13.0
       MMXCore Routines 13.0.1 (13.0.1.2 20130522.r.24 2013/05/22:21:00:00)
       Mosaic Tiles 13.0
       Multiprocessor Support 13.0.1 (13.0.1.2 20130522.r.24 2013/05/22:21:00:00)
       Neon Glow 13.0
       Note Paper 13.0
       NTSC Colors 13.0.1 (13.0.1.2 20130522.r.24 2013/05/22:21:00:00)
       Ocean Ripple 13.0
       Oil Paint 13.0
       OpenEXR 13.0
       Paint Daubs 13.0
       Palette Knife 13.0
       Patchwork 13.0
       Paths to Illustrator 13.0
       PCX 13.0.1 (13.0.1.2 20130522.r.24 2013/05/22:21:00:00)
       Photocopy 13.0
       Photoshop 3D Engine 13.0.1 (13.0.1.2 20130522.r.24 2013/05/22:21:00:00)
       Picture Package Filter 13.0.1 (13.0.1.2 20130522.r.24 2013/05/22:21:00:00)
       Pinch 13.0
       Pixar 13.0.1 (13.0.1.2 20130522.r.24 2013/05/22:21:00:00)
       Plaster 13.0
       Plastic Wrap 13.0
       PNG 13.0
       Pointillize 13.0
       Polar Coordinates 13.0
       Portable Bit Map 13.0.1 (13.0.1.2 20130522.r.24 2013/05/22:21:00:00)
       Poster Edges 13.0
       Radial Blur 13.0
       Radiance 13.0.1 (13.0.1.2 20130522.r.24 2013/05/22:21:00:00)
       Read Watermark 4.0
       Reticulation 13.0
       Ripple 13.0
       Rough Pastels 13.0
       Save for Web 13.0
       ScriptingSupport 13.0.1
       Shear 13.0
       Smart Blur 13.0
       Smudge Stick 13.0
       Solarize 13.0.1 (13.0.1.2 20130522.r.24 2013/05/22:21:00:00)
       Spatter 13.0
       Spherize 13.0
       Sponge 13.0
       Sprayed Strokes 13.0
       Stained Glass 13.0
       Stamp 13.0
       Sumi-e 13.0
       Targa 13.0
       Texturizer 13.0
       Tiles 13.0
       Torn Edges 13.0
       Twirl 13.0
       Underpainting 13.0
       Vanishing Point 13.0
       Variations 13.0.1 (13.0.1.2 20130522.r.24 2013/05/22:21:00:00)
       Water Paper 13.0
       Watercolor 13.0
       Wave 13.0
       WIA Support 13.0.1 (13.0.1.2 20130522.r.24 2013/05/22:21:00:00)
       Wind 13.0
       Wireless Bitmap 13.0.1 (13.0.1.2 20130522.r.24 2013/05/22:21:00:00)
       ZigZag 13.0
    Optional and third party plug-ins: NONE
    Plug-ins that failed to load: NONE
    Flash: NONE
    Installed TWAIN devices: NONE

    You need to update that old video card driver, from AMD's website (not Microsoft, and not the system builder).

Maybe you are looking for

  • Why aren't all incoming messages going to Gmail- Inbox, but they're in All Mail?

    Sorry if this has been answered, I haven't seen a suitable answer anywhere. I have lots of incoming emails I can only view in the All Mail folder nested under Gmail, but they never showed up in Inbox. Is there a reason or setting new emails are only

  • Video out after using Apple Video adapter.

    Hi, I have an Mac G5 17" iSight and after I mirror'd my screen to my TV using an Apple video adapter (something I've done hundreds of times before) the computer screen wouldn't change back to the general screen resolution (also something it used to d

  • Report on sales orders

    hi all, i need to develop a report which has Purchase order number, sold to party, sales order number, required delivery date and confirmed delivery date by system. i tried to to do this by sqvi, but here requirement is some group of users have to ru

  • Display slow to come on when waking from sleep.

    There have been quite a few entries of similar problems lately with no real answers that I found. I have a FW800 dp 1.42 machine running 10.4.11. When coming up from sleep the machine comes up but the display may say black for up to 5 min. This is wi

  • CS4 & CS5 Indy with same serial number

    Can CS4 & CS5 Indy with same serial number both be open on the same machine? Thanks!