AMD High Definition Graphics Driver_TR does not want to install

I have a HP Pavilion 17 Notebook, Product number: G4X63UA#ABA, with windows 8.1 64 bit that has a AMD Radeon HD 7640G Graphics card,
but the graphics driver update from HP (mentioned in the subject line) does not want to install?

Hello @Ebert1,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you are not able to install the AMD graphics driver on your notebook computer, and I would be happy to assist you in this matter!
To successfully install any missing software on your computer, I recommend installing the original software and hardware drivers that came with your notebook. This can be done by following this document on Using Recovery Manager to Restore Software and Drivers (Windows 8), as well as Using HP Support Assistant (Windows 8) to update your drivers.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Similar Messages

  • AMD High Definition Graphics Driver will not install

    HP Pavilion g6-1b59wm Special Edition Notebook PC. Windows 7 Home Premium 64-bit service pack 1. HP Support Assistant downloaded the AMD High Definition Graphics Driver it will not install. Have tried 3 times to install it.

    HP SA has been a bit wacky lately-even trying to install Windows 8 drivers on some Win 7 machines.Try downloading and installing manually from your driver page:
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategor​y?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5256​...
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • AMD High-Definition Graphics Driver Problem

    Hi
    Okay so I play a game called "The Sims 4", and if any of you are familiar with it then you know what I am talking about when I say I am testing mods out. I was doing this for a couple hours and came across some bad mods, so I delete them. Well I put a few more mods in my game and went in, everything seemed fine, then got out. When I went to go back in an error message came up saying "No AMD graphics driver is installed, or the AMD driver is not functioning properly. Please install the AMD driver appropriate for your AMD hardware." I then proceeded into my game which did not work. So I came onto this site to update my driver and downloaded the "AMD High-Definition Graphics Driver". There was two options both the same name and same description one was a few megabite larger. After then I restarted my computer tried my game out and it still did not work. I then took out the mods I put into my game right before this all went haywire, and my game worked....BUT VERYYYY LAGGY! I was so frustrated with this that I shut down my computer hoping a miricle would happen next time I turned it on....only to turn it on this morning and that SAME error message came up! SO NOW WHAT? How to I unistall the graphics driver I downloaded (becuase I think its making my game laggy and it did not solve the initial problem.
    Any help is appricated! - Lulejojo

    Thank you so much indeed,
    Could you please take some of your precious time out to really answer these questions below of mine?
    Firstly:: I really have run this Utility(amdcleanuputility) to remove all components of the prvious installation of AMD Radeon and Mobile Inte Graphics.
    I was propmted that  tool will do as it is shown below in the screen shot.
    I agreed. Then, it completed. Is 'AMD cleanup utility' recommended by you?
    Then, the graphics adapters in the device manager became as follows:
    Secondly: I think that it is now the point to reinstall AMD High-Definition Graphics Driver_Software Packaging Numbr(SP55092)_Driver Version 8.882.2.3000.
    Thirdly: Moreover, I would be saying that I lost the audio on my System once the (amdcleanuputility) has completed, although its icon is still intact(screen shot below)
    Must I need to reinstall IDT High-Definition (HD) Audio Driver_Sp55094_Version6.10.6345.0????
    Finally::  in your link about downloading the drivers for my product name. I found Driver-Graphics (5) . However, all what I need is the finall one which is an already-downloaded file with me. Could you please let me know what about the other four graphics drivers????????

  • Update for AMD High-Definition Graphics Driver

    I have a HP Pavilion g6 Notebook LW350UA#ABA 64 bit operating system Windows 7.  HP Assistant is offering me a update for AMD High-Definition Graphics Driver.  It goes through the check list with green checkmarks next to them all the way down to the download completion.  Then it goes through the installation but stops with a black X beside that.  I close out the HP Assistant and it shows on the Task Bar with a Red Exclamation Point still offering me the same update. I would appreciate any help in how to get this update installed.
    This question was solved.
    View Solution.

    Hi,
    It doesn't look like there are any recent AMD updates for your notebook, so this may be a configuration error with HP Support Assistant.
    Try the following.
    First of all, uninstall your current version of HP Support Assistant by using the Microsoft 'Fixit' on the following link - this is particularly useful in correcting issues that may prevent reinstallation on machines running a 64bit OS.
    http://support.microsoft.com/mats/Program_Install_and_Uninstall
    When this has completed, restart the notebook.
    Next download and install the latest version of HP Support Assistant from the page on the link below - the download links are towards the bottom of the page.
    http://h18021.www1.hp.com/helpandsupport/hp-support-assistant.html
    After the installation, restart the notebook again.
    Check if HPSA still offers the AMD update.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Flash Player 10 ActiveX, installed perfectly on FireFox but does not want to install on IE8

    I tried to install Flash Player 10 ActiveX but no luck
    operating system VISTA 32bit
    web browser and version IE8 32bit
    Flash Player version WIN 10,1,82,76
    is there anything in the security needs to be adjusted?
    It was running perfect before I do the latest upgrade
    It is running perfect on Fire Fox
    It is just not working on IE8
    Flash Player 10 ActiveX, installed perfectly on FireFox but does not want to install on IE8

    Hi, You might want to review the Troubleshooting Guide as it has been updated and a lot of new information is now included. If you prefer you can use the Manual Installer for IE which you'll see there. A lot of the questions that I would ask are listed also.
    http://kb2.adobe.com/cps/191/tn_19166.html
    Hope this is helpful for you.
    Thanks,
    eidnolb

  • Had installed the component of the Double Click Studio in my Flash CS6, but uninstalled it and now does not want to install.

    Had installed the component of the Double Click Studio in my Flash CS6, but uninstalled it and now does not want to install. Is in install mode screen and Extension Manager does not install. Help me!

    What you said confused me. You uninstalled it. You does not want to install. Why do you install it again? Could you explain it clearly?

  • Oracle 817 does not want to install on RH Linux (ORA-03113)

    I am trying to install Oracle 817 on RH Linux with kernel
    2.4.17. I have modified various recommended parameters
    as described in the doc and recompiled the kernel.
    But each time I try to create a database, I would be getting this error:
    ORA-03113: end-of-file on communication channel
    Please help!! My system has 512 MB of ram and 1GB of swap.
    It is a Pentium III about 700 MHZ.
    thanks
    --Vincent

    After Forms 6i it is only possible to run the Forms web based. Inside the the Developer Suite you can find an OC4J which allows you to run the Forms locally on the Development PC.
    There are setting in the formsweb.cfg which allows you to do some configuration. For instance the look and feel which is by default the green color. The size of your window which makes your current window smaller than your Form.
    At your last question. Do you want the other user to make use of your Forms or make use of your database. If you want him to make use of your Forms, the other user could call the locally installed OC4J with the http-address. If you want the user to make use of the database, the other pc should have a installed client software or make use a tool like SQL Developer to connect over JDBC.

  • Adobe acrobat x pro does not want to install on win7, 64bit

    Is there anyone that can help me?  I never managed to sucessfull install Adobe Acrobat x pro on my windows7, 64bit system - it just won't work

    Hi Nancynator,
    Please specify the error message during install.
    Regards,
    Romit Sinha

  • 9i patch does not want to install

    Hi,
    I installed patch 9.2.0.7.1 patch on 6 servers without problem. When I got to the PRD system, it fails with 'Applications running...stop before continuing'. No service or application is listed in the pop-up box.
    I shut down both App servers. Restarted DB server. Stopped the necessary services and just about all other services as well. STILL I get the pop-up telling me there are applications running.
    What could be the cause?

    on Windows 2003:
    open a command box and run following commands:
    <i>tasklist /m | findstr -i oci
    tasklist /m | findstr -i ora</i>
    if one of them is reporting files, rerun the command
    tasklist /m > opendlls.txt
    edit opendlls.txt and search for the DLL still loaded.
    you will find the process name and the process ID.
    If the process is started as a service you might find
    tasklist /svc
    helpfull which enables to you connect the process to a servicename.
    in most cases the Distributed Transaction Coordinator (Service) is the problem.
    regards
    Peter

  • Need assistance installing MindStorm NXT module on my desktop with Win XP and also my laptop which runs Win 7, software does not want to install?

    I need assistance to install LabView MindStorm NXT module in a Desktop system with Win XP and a Laptop with Win7. Both are 32 bit with all service packs applied. I purchased the academic version from a company called On-The-Hub.
    Attempted to install but seems to reject my serial number?

    Hi Rob,
    Thats really strange because the NXT Module 2010 and the NXT Module 2011 are free and don't require serial numbers. Where did you obtain the installer? The core LabVIEW installer requires a serial number but if you already have that installed, the NXT Module is just a free addon. Here are the links to the module for LabVIEW 2010 & 2011
    NXT Module 2011 : http://joule.ni.com/nidu/cds/view/p/id/2637/lang/e​n
    NXT Module 2010: http://joule.ni.com/nidu/cds/view/p/id/2551/lang/e​n

  • AMD High Definition Audio Device Not Plugged In (HP Pavilion dv6-6b09sa)

    I have just booted up my HP Pavilion dv6-6b09sa (running on Windows 7) laptop to find that the sound icon has a red cross next to it and it claims that 'No speakers or headphones are plugged in'. In the Control Panel it states that the AMD High Definition Audio Device is Not Plugged In. As far as I know, I've done nothing to cause this.I have already tried:System restore to yesterday at 10pm;Instalation of a TDI driver from the HP website, however I do not know how to edit/disable/delete the old driver. I'm completely clueless about these things. Please help, I'm at a complete loss.

    This happened to me too. I own an HP Pavilion dv7-1135nr (Windows Vista). The internal hard drive stopped working, I took it to a computer repair shop, they put in a new internal hard drive, asked Microsoft for a key code and jump started the laptop. I took it home with me yesterday, watched a few videos and wondered why the sound wasn't working. The volume light on the laptop base was indicated as red (which meant the volume was off, even when the volume on the laptop screen was on). The only way I was able to hear sounds from videos was when I put my ear phones on. 
    I read somebody say that this happened to them and they restarted/rebooted their computer. I did that and, expectedly, it didn't work.  I came across this page, opened up "Device Manager," opened up "Sound, Video and Game Controllers." Right-clicked the "IDT Device" and then uninstalled it. My laptop then restarted and thankfully the sound was back up. I didn't need to download anything or right click the "IDT Installer" or "Right click the speaker icon in the Taskbar and select Playback Devices.  Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button" or any of that. It thankfully came back without me having to do any of that. I restarted/rebooted my computer to see if it was a fluke, and thankfully it worked again.  Now I don't have to use my ear phones. My ears didn't like being pumped with sound, even when it was on low. My "Digital Display Audio" is still not checked green. It says that it's "not plugged in." But hopefully I won't run into this problem again in the future. Because if I'm a week or two or a month removed, the repair people I initially went to for my internal hard drive problem, will say that this was a separate issue caused by me and will charge me extra, when it was in fact caused by them (not maliciously of course, I guess this kind of thing happens when you replace a hard drive, as do a lot of other things which I'm not beginning to see). Thanks DavidPK.

  • "AMD HDMI Output -AMD High Definition Audio Device not plugged in

    i have an HP Pavilion dv6-6110us laptop. i have had this laptop for less than 1 month and the sound is not working at all. I checked to make sure nothing was muted, i uninstalled the soundcard and reinstalled it on Device Manager, and still, I cannot manage to get the sound back on. the audio settings says "AMD HDMI Output -AMD High Definition Audio Device not plugged in) ..but i have no clue how to "plug it in". Help!!!?

    Hey! You essentially have two sound cards, including the HDMI. First, make sure you're using the ATI graphics card, and not the Intel, when you want to use the HDMI.
    Next, go to Windows Control Panel\Sound
    On the playback tab (which shows by default), WHEN YOUR HDMI IS PLUGGED IN AND WORKING, you should see two playback devices: Your internal sound card/speakers, and the AMD HDMI. All you need to do is switch between the playback device you want the sound to be channelled to. You can switch this at any time. I do this when watching in the other room via my projector, or in my comp. room. Just select the HDMI sound device and choose the button on bottom-middle "Set Default". This will change the "default device" tag to below the HDMI playback device. To reset, either unplug the HDMI, or switch it here. This is always the first place you should look when you have sound issues.
    Because I switch quite often, I have a shortcut link on my desktop to this sound menu, for quick switching.
    If this doesn't work, make sure you have drivers for your ATI video card installed. Check you exact model and make sure your bios is up to date. They have made for switchable graphics now, which is much preferable to the previous auto-detect switch. The drivers are updated, as well. The latest HP drivers for the ATI were released in November. You can install these, then install the latest AMD/ATI Mobility Video Driver package over the top to make sure you have the latest video drivers. Either of these packages includes the HDMI audio driver, which you may not have installed.

  • AMD High Definition Audio Device Not Plugged In - h8-1070t

    Seeing this message in control panel/display drivers for HDMI on my video card.
    In short I will get sound occasionally out of my HDMI card which is plugged into my stereo. Randomly the sound wil cut out and I get this message: AMD High Definition Audio Device Not Plugged In
    Occasionally when I restart my computer it works again, but only for a short time. I have reinstalled the drivers from AMD with no luck.
    Stats below:
    Model: h8-1070t
    Product: LP028AV#ABA
    Video Card: AMD Radeon 6850
    Much appreciated for any help!

    I have the same problem and have just begun looking into it. I have my Radeon 7570 hooked up to a Panasonic TV with the HDMI connection. After a reboot of the computer and turning on the TV it works, but if I change the input on the TV to something else and then come back to the HDMI input the computer is connected to, the sound is lost. The computer then reports that the AMD device is not plugged in and it switches the default to the standard speakers.
    Elsewhere I've seen it reported that updated AMD drivers have corrected the problem for some, but when I used AMD's automated driver detector and downloader it complained that it couldn't identify the 7570. So HP's version of the 7570 doesn't seem to match AMD's. So it's up to HP to provide an updated video driver to correct this problem.
    Let's hope they do.

  • Installed graphics card does not support the opengl features recommended

    I've installed FCP6 on my PowerMac (PPC G4 DP 1.25GHz), and when I run it, I get a warning ("...installed graphics card does not support the opengl features recommended...") and the program ends. The graphics card is the ATI Radeon 9000 Pro (64MB)
    I'm looking for a definitive answer regarding my hardware compatibility with FCS2 (specifically, FCP6). I'm NOT looking for an answer along the lines of: your system is too old to run this.
    I've checked the minimum system requirements from the apple website (http://www.apple.com/finalcutstudio/specs/
    and http://www.apple.com/finalcutstudio/download/):
    * A Macintosh computer with a 1.25GHz or faster PowerPC G4, PowerPC G5, Intel Core Duo, or Intel Xeon processor
    * 1GB of RAM
    * An AGP or PCI Express Quartz Extreme graphics card (Final Cut Studio is not compatible with integrated Intel graphics processors)
    * A display with 1024-by-768 resolution or higher
    * Mac OS X v10.4.11 or later
    * QuickTime 7.3 or later
    * DVD drive for installation
    I have all that stuff. What I'd like is to know which component of my system is FCP6 complaining about (vis-a-vis the error message above), alternatively, if someone has had success with a similar configuration, I'd like to know anything they think might help.
    Thanks in advance for any helpful advice you may have.

    The minimum would probably be an nVidia Fx5200 or an ATI 9600...
    Patrick

  • After updating to lion installed graphics card does not meet minimum requirements for aperture

    Hello,
    I updated to OSX lion yesterday. and Apterture is given me this error message.  "The installed graphics card does not meet the minimum requirements for Aperture.   I tried the Option Command Open app thing to try rebuild the database.  But nothing happens when I try opeing the app using those combo key's  So I removed the app using mackeeper and tried reinstalling it. still same issue.
    I have following machine
    Model Name:          MacBook Pro
      Model Identifier:          MacBookPro8,2
      Processor Name:          Intel Core i7
      Processor Speed:          2.3 GHz
      Number of Processors:          1
      Total Number of Cores:          4
      L2 Cache (per Core):          256 KB
      L3 Cache:          8 MB
      Memory:          8 GB
      Boot ROM Version:          MBP81.0047.B0E
      SMC Version (system):          1.69f1
      Serial Number (system):          C02F94ETDMGG
      Hardware UUID:          132AE53D-0766-5E17-9F54-ED935D6F7AB3
      Sudden Motion Sensor:
      State:          Enabled
      Chipset Model:          AMD Radeon HD 6750M
      Type:          GPU
      Bus:          PCIe
      PCIe Lane Width:          x8
      VRAM (Total):          1024 MB
      Vendor:          ATI (0x1002)
      Device ID:          0x6741
      Revision ID:          0x0000
      ROM Revision:          113-C0170L-521
      gMux Version:          1.9.23
      EFI Driver Version:          01.00.521
      Displays:
    Color LCD:
      Resolution:          1680 x 1050
      Pixel Depth:          32-Bit Color (ARGB8888)
      Main Display:          Yes
      Mirror:          Off
      Online:          Yes
      Built-In:          Yes
    VX2245wm:
      Resolution:          1680 x 1050 @ 60 Hz
      Pixel Depth:          32-Bit Color (ARGB8888)
      Display Serial Number:          QD0064002266
      Mirror:          Off
      Online:          Yes
      Rotation:          Supported
      Adapter Type:          Apple Mini DisplayPort To VGA Adapter
      Adapter Firmware Version:          1.03
    Display Connector:
      Status:          No Display Connected

    HAve you tried disconnecting the external monitor rebooting and then runnig Aperture?

Maybe you are looking for