AMD Radeon Graphics Card Not Found! Please Help HP Envy M6...

When I head into device manager, it shows that I have only an Inter (R) HD Graphics 4000 graphics card even though the laptop is said to have an AMD Radeon built in... I've upgraded my version of Windows but it doesn't make sense, why does this driver go away? I've reinstalled every driver there is for the AMD series... I can't get my laptop to detect the graphics card, has anyone had this problem? I've seen this on threads too but the answers weren't helpful at all because they just redirected the user with a link to another thread which isn't relating to a graphics card. Is there any way I can fix this so my laptop can detect my graphics card?
Note: When I run AMD's 'automatic driver checker', it CANT EVEN DETECT IT ... Please help me, there's just one too many problems with this laptop aside from the fact that it overheats like crazy.
Thank you,
Shehryar.

This is the picture that I've taken, you can see that the Intel HD Graphics 4000 is indeed there however, I found an unknown device at the bottom. There is NO information of this device, here is the 'info' for the unknown device:
Device type : Other
Manufacturer : Unknown
Location : On PCI Express Root ComplexUpdate driver will not work. I'll look for more but that's really it... Thanks Shovon_Khan!

Similar Messages

Unable to Launch Adobe Premiere Pro CS6 using High-Performance on AMD Radeon Graphic Card

I have been unable to launch Adobe Premiere Pro since installing it with the error message "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again"
Here are my specs:
Lenovo Ideapad U400
Windows 7 (64bit)
Intel i5 2.5 ghz processor
AMD Radeon 6470M graphics card
The only occasion during which I have successfully launched Premiere Pro was after reverting to the default graphics card on my computer and uninstalling AMD Radeon, otherwise, I have tried to change Premiere Pro to run on High-Performance on Catalyst Control Center to no avail, I do not wish to revert to the Standard Graphics Card as it slows down my computers performance one hell of a lot, neither do I wish to have to constantly uninstall and reinstall my AMD Radeon Graphics Card when I use Premiere Pro. Thank you for your time.

Update:
- with Intel (R) HD Graphics Card disabled, Catalyst Control Center reports that no AMD Graphic card is installed
- using Device Manager under Control Panel, AMD Radeon 6470M was verified to be up-to-date
- Premiere Pro works so long as I disable the Intel card before launch, however, I re-enable it upon startup to get rid of the 800x600 resolution
- AMD Mobility Radeon Driver Verification Tool is unable to verify and update my driver, refers me to lenovo to update it.
- My graphics card is up-to-date as verified by lenovo
- Intel (R) HD Graphics Card now up-to-date
- Display currently mainly using Intel (R) HD Graphics Card (Possibly why it caps resolution at 1024x768 when disabled) I'm not sure how to switch the main Graphics Card used, Catalyst Control Center doesn't seem to have the option.
- when disabled, computer reverts to vgasave instead of Radeon
- Disabling Radeon does nothing to existing display
- After updating my Intel card, Catalyst Control Center reported CCC was not supported by the current display adapter
- CCC worked after rolling back Intel card
From what I infer, I believe the problem to root from my intel card being the main card used, if there is anyway to switch my radeon card to the default instead of the Intel card, do tell me, I believe this may solve the problem, I apologise for troubling you guys, and I'm starting to feel that I shouldn't be troubling Adobe with my problem with AMD, this discussion is probably really out of place but I hope it will help out others with a similar problem.

AMD Radeon Graphic Card 8670 not working on my Pavillion 15 notebook n259tx win8.1

i recently purchased the above notebook and tried to play some games but i am getting error that my graphic card drivers are either not installed properly or they are missing altogether, i had installed drivers from AMD's autodetect driver tool. Earlier i had installed AMD drivers from windows update but the problem still exists. In the game i am getting memory insufficient error, unable to change graphics and display settings. Game crashes giving me error message as to update my AMD graphic drivers.
My notebook specs are-(dxdiag)
System Model: HP Pavilion 15 Notebook PC
BIOS: F.42
Processor: Intel(R) Core(TM) i3-4010U CPU @ 1.70GHz (4 CPUs), ~1.7GHz
Memory: 4096MB RAM
Available OS Memory: 4026MB RAM
Display Devices-
Card name: Intel(R) HD Graphics Family
Manufacturer: Intel Corporation
Chip type: Intel(R) HD Graphics Family
Display Memory: 1792 MB
Dedicated Memory: 0 MB
Shared Memory: 1792 MB
Render-
Card name: Radeon (TM) HD 8670M
Manufacturer: Advanced Micro Devices, Inc. Chip type: AMD Radeon Graphics Processor (0x6660)
Display Memory: 3836 MB
Dedicated Memory: 2044 MB
Shared Memory: 1792 MB
I tried changing settings through BIOS setup, but no such (Advance/Display)setting were available??
I tried setting the app to high performance too through 'Configue Switchable Graphics' option but no success.
Please tell me which drivers i need to install or what i need to do to work my AMD Radeon Card.
This question was solved.
View Solution.

Hi DevangS,
If you are using GTA 4 then that would actually be the problem. According the PC System Requirements for GTA 4 it is only compatible with Windows Vista and Windows XP. Also the game requires a minimum of a 1.8 GHz processor and your model only has 1.7 GHz. You are trying to run an older game on the wrong operating system with hardware that doesn't meet the requirements for the game. Changing the BIOS or the NET framework isn't going to help with this issue.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Mac Pro 3.1 graphics card not found

SOS !!!
Last night I shuted down my Mac Pro ok.
This morning I power it on, it passes power on test (it makes the beep) , but the graphics card fun remains at full speed making noise and I have no signal on my display screen!
I connected to my Mac via teamviewer and opened system information where I see at graphics panel that there is no information for my card.
Does this means that I have to replace my graphics card, or it may be something else that causes problem to my graphics card?
The AASP store is far enough and transfer cost is expensive. I saved a copy of my S.I. named Mac Pro.spx. I also saved a copy of my console system log file named system.log and I uploaded them to a dropbox folder for anyone that interests to help me.
Link is https://www.dropbox.com/sh/ai3nqvk1mhjp9va/AADZpC2y_msah8ei2QrMlnYKa?dl=0
Mac Pro 3.1 ML 10.8.5

here are my photos of 8800GT... some dirty parts too... But now I leave next steps for tomorrow...! I'm tired and it's late for cleaning and baking!!!

Original files not found, please help.

I am running iTunes 8.0.1.11, and I have about 11.5 gigs or so of music. Today I fired up iTunes and started skimming through songs like I often do, only to start playing a song and have the "original file not found" message pop up. I took a deeper look, and the majority of my 3200 songs show this message. There is no common factor between these songs, some are from the iTunes Store, some are from CD's, and some are from various mp3 services. In some cases, a few of the songs from a CD are missing, while others are present. Under "iTunes Music" in "My Music", the music folders (ie "Linkin Park") are present, but it appears that all the music has been deleted from in them.
I am a little miffed at this, because I had quite a few rare albums and EPs in my collection, and none of them were backed up.
Is there any way to get them back? Perhaps the file paths were changed? I hope that the music is still on the HD somewhere, and that I don't have to hunt down all these albums again. Any help would be great.

Sadly, I've been looking around for around an hour for an answer to this problem, yet to just waste time.
I have the same problem and can't find an obvious way to fix it. Nothing works without asking me to locate the file in my music folders. On my iPhone I have roughly 35-40 artists listed, on iTunes I have 9 that are listed in the music folder, only about 15 of my 349 songs work. Sadly, I can't update my iPhone until this is fixed, thank goodness for the wall charger! I've noticed that it made the songs that were "Un-checked" go missing and the "Checked" songs are perfectly fine!
This problem has been around for ages, this happened to me like a year ago on a different version of iTunes. Yet, I haven't seen APPLE mention anything about it, at least acknowledge it! If I find an answer I won't waste anytime and will post it immediately, but as for now APPLE <insert phrase>(I'm going to use the phrase 'is lazy')!
Message was edited by: King21092
Also I would like to add that it seems like my songs have disappeared from my HDD, amazingly! That or they have been moved somewhere else. I originally had the songs on my old dell, copied the songs to my new HDD for my new PC. Then that HDD went bad, so I moved it to my other HDD, so I have back-ups.

SAXParser type declaration not found - PLEASE HELP!!

I am using XML to parse an incoming string of XML. I want to use an SAXParser to do this, but I cannot create an object of this type. I have the jar file jaxp.jar, xalan.jar, and crimson.jar in my classpath.
Is there anything else that I need to do in order to get the parser to work.
This is a very urgent need so any help is appreciated. Here is the error:
Class SAXParser not found in type declaration;

I have figured out the issue. Thanks for the help. I do have one more issue though. I am trying to parse a string of xml data and I need to pass my parse() method an InputSource object that I guess I will make from my incoming String.
Any thoughts on how to do this?

I download itunes it says its successfully installed. then when i try to open it it says "apple application support not found" PLEASE HELP!!

I download itunes it says its successfully installed but then when i try to open it is says "Apple Application Support not found"

Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Trouble downloading itunes 64 bit. when i click the link it says webpage not found. please help!

Having trouble downloading itunes 64 bit on windows 7. When i click download it brings me to a "webpage not available" page. Please help!

The servers are likely overloaded. Try again in a few hours.

Class not found********please help!

I'm trying to run my jsp application which imports two classes that i have saved in ROOT/WEB-INF/classes/business and ROOT/WEB-INF/classes/data. when I run the application by entering the url on the browser i get the following error. Does this mean the server cannot locate these two classes and what should i do to resolve this problem?
type Exception report
message Internal Server Error
description The server encountered an internal error (Internal Server Error) that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: Unable to compile class for JSP
/opt/jakarta/tomcat/work/localhost/_/replace$jsp.java:3: Package business not found in import.
import business.*;
^
/opt/jakarta/tomcat/work/localhost/_/replace$jsp.java:4: Package data not found in import.
import data.*;
^
2 errors
at org.apache.jasper.compiler.Compiler.compile(Compiler.java:284)
at org.apache.jasper.servlet.JspServlet.loadJSP(JspServlet.java:546)
at org.apache.jasper.servlet.JspServlet$JspServletWrapper.loadIfNecessary(JspServlet.java:177)
at org.apache.jasper.servlet.JspServlet$JspServletWrapper.service(JspServlet.java:189)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:382)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:474)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:243)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:201)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2344)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:164)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:170)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:170)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:462)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:163)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.connector.http.HttpProcessor.process(HttpProcessor.java:1011)
at org.apache.catalina.connector.http.HttpProcessor.run(HttpProcessor.java:1106)
at java.lang.Thread.run(Thread.java:479)

Sorry for taking long to reply but here is the code for both packages. The main aim is to write information captuired from a form into a file.
Package business
package business;
public class User{
private String Msisdn;
private String Nimsi;
public User(){}
public User(String msisdn, String nimsi){
Msisdn = msisdn;
Nimsi = nimsi;
public void setmsisdn(String m){
Msisdn = m;
public String getmsisdn() { return Msisdn; }
public void setnimsi(String n){
Nimsi = n;
public String getnimsi(){ return Nimsi; }
package data;
import java.io.*;
import business.*;
public class UserIO{
public synchronized static void addRecord(User user, String filename)
throws IOException{
PrintWriter out = new PrintWriter(
new FileWriter(filename, true));
out.println(user.getmsisdn()+ "|"
+ user.getnimsi());
out.close();
}

'Integration Class not found' - Please help

Hi Guys
My EM from browser stopped working unexpectedly.
What happens is when I start login in, I can't move over login screen, no error messages displayed on browser screen. I use IE.
Here is what I find in emoms.log:
1510 2006-10-30 14:42:32,062 [Orion Launcher] ERROR app.Co
ntextInitializer contextInitialized.256 - Integration Class n
ot found: oracle.sysman.ocs.mntr.target.OcsOvfIntegration
1511 2006-10-30 14:42:32,062 [Orion Launcher] ERROR app.Co
ntextInitializer contextInitialized.256 - Integration Class n
ot found: oracle.sysman.ocs.mntr.target.OcsWebconfIntegration
1512 2006-10-30 14:42:32,078 [Orion Launcher] ERROR app.Co
ntextInitializer contextInitialized.256 - Integration Class n
ot found: oracle.sysman.ocs.mntr.target.OcsWirelessIntg
1513 2006-10-30 14:42:32,078 [Orion Launcher] ERROR app.Co
ntextInitializer contextInitialized.256 - Integration Class n
ot found: oracle.sysman.ocs.mntr.target.OcsCalGrpIntegration
1514 2006-10-30 14:44:23,015 [HttpRequestHandler-6627600]
ERROR sec.auth doLogon.207 - Error logging on:
1515 java.lang.NumberFormatException: multiple points
1516 at java.lang.FloatingDecimal.readJavaFormatString(F
loatingDecimal.java:1067)
I tried to recompile package as it say in:
http://forums.oracle.com/forums/thread.jspa?threadID=337544&tstart=0&messageID=1356947#1356947
but only received message back:
ORA-04043: object MGMT_AUDIT_LOG does not exist
Is there anyway for me to fix this problem without database re-installation?
Thank you, Gene.

Hi guys
Thank you for your support.
Here is an answer on your question Ugonic.
( I use mks tools ksh port for windows 2k)
Here is an output: ls C:/oracle/10/Db_1/opmn/bin
ons.exe onsclient.dll
C:/oracle/10/Db_1/opmn/bin> ./ons -help
Usage: .\ons [-d]
-d Daemon mode: forks and detached OPMN server process
-a <admin command> Please type ".\ons -a" for usage
I guess ons is a replacement of opmnctl on version 10.
I could not find opmnctl on my SUSE installation neither.
Now, I tried to experiment with em by using different URLs:
http://127.0.0.1:5501/em this is a loopback ip
http://10.104.3.79:5501/em this is my current ip
http://n513gg0_d1:5501/em this is my pc name
on
netscape 8.1.2 ( by the way problem started when i - stupid me - upgraded it from 8.1 to 8.1.2)
ie 6.0.280
On netscape: all 3 commands do not work.
ie: first two commands work and display all em functionality and the last one which uses my pc name - does not.
I did not mention to you that my pc uses dhcp and from what I read em DOES NOT like it. It likes permanent address.
I beleive I came accross of 2 problems:
1. netscape 8.1.2 is an uncompatible browser for em application.
2. name resolution does not work well with em. The proof for the last is error when I use http://n513gg0_d1:5501/em on ie, it does not trunslate it to ip address.
I also went to page: http://n513gg0_d1:5501 and displayed page:
Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)
At the end of it I found test examples for:
JSP
servlets
Each group provides multiple exampls. It's interesting that no netscape neither ie are not able to work with all JSP examples.
For now I will be working with ie for em and I beleive problem is solved - you should be progmatic because dhcp/em/browser compatibility is too much to worry as long as it works.
My only concern - and I only study oracle - that I view it as a major architectural flaw in Oracle 10 - this dependence on em windows interface.
One can say: "you can do the same from command prompt" But how many of us who is learning Oracle or who used to use an old ie will be able to use command interface efficently specially when you need to react fast?
And, if Oracle provides such a great tool and wants you to use it heavily, don't they have to provide a separate installation option for just a re-installation of em itself ?
I was about to scratch my test installation and re-install it again. Would it be an option in production environment?
Thank you guys for your help and I with best to you.
Gene.

Graphics card fail ? (Please help)

Hi,
I got my macbook pro early 2011 15in i7 for like 2 years now and i have a problem since yesterday.
I tried to open an MP4 with VLC (1080p) and to my surprise the screen turns black after some stripes i reboot my mac and the loading screen has green stripes in it, but when it finishes loading it just stays gray and doesn't turn on.
I let it go for like 10 minutes nothing happened and it's just when i restarted it with a hard shut down that it worked again, i reset the PRAM and SMC too.
Today what it does is, when i try to open a game or a 1080p video with any player it just cashes and becomes wierd, even watching videos on youtube makes it crash.
I tried to reinstall Mac OS x Mountain Lion but it says that it can't be done because my disk is not on a GUID partition scheme which i tried to change but it didn't work.
And when i go to the recovery or to the windows partition it just turns blue with black stripes.
I did a lot of researches on this but i found nothing so if you could help me please that would be very nice here are some pictures that i took

I would love to but i can't do that right now because of some work i have to do on it, i haven't starded photoshop yet to see if it's gonna crash again but i also installed Adobe Air 3.8 yesterday and i wonder if that's what caused it to crash, i just uninstalled it from my computer i don't know if it's gonna do anything to it.

Build of DC fails libraries on classpath are not found - Please Help

HI Guys,
I am trying to build an ejb dc.
There are no errors showing up in NWDS but when doing an Development Component -> Build the Build fails with the errors here in the log - how can I make sure the libs are found at compiletime?????
DC Model check:
   All used DCs are available locally
   validating dependency to build plugin "sap.com/tc/bi/bp/ejbmodule"
   validating dependency to public part "default" of DC "sap.com/ejb20"
   validating dependency to public part "default" of DC "sap.com/jdbc20"
   validating dependency to public part "default" of DC "acdc.de/pinguin/service/dic"
   validating dependency to public part "default" of DC "sap.com/configuration"
   validating dependency to public part "default" of DC "sap.com/connector"
   validating dependency to public part "default" of DC "sap.com/mail"
   validating dependency to public part "compilation" of DC "acdc.de/pinguin/ext/lib"
   validating dependency to public part "default" of DC "sap.com/jms_provider"
   validating dependency to public part "default" of DC "sap.com/jmsconnector"
   validating dependency to public part "default" of DC "sap.com/jms"
   validating dependency to used DC "apotheker.com/cape/base/external/lib"
   validating dependency to used DC "apotheker.com/cape/base/utils"
   DC model check OK
Start build plugin:
   using build plugin: sap.com/tc/bi/bp/ejbmodule
   starting build plugin from : D:\usr\nwds\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP_BUILDT\DCs\sap.com\tc\bi\bp\ejbmodule\_comp\gen\default\public\ejb\
Build Plugin 'EJBModulePlugin', Version 7.00 SP 3 (NW701_03_REL, built on 2008-12-17 16:25:56 CET, CL51263)
   development component: pinguin/service/ejb (acdc.de)
      software component: MyComponents (demo.sap.com)
                location: local
                    type: J2EE, subtype EJBModule
           build variant: default
         output location: C:\Documents and Settings\user\.dtc\LocalDevelopment\DCs\acdc.de\pinguin\service\ejb\_comp\gen\default
       generation folder: C:\Documents and Settings\user\.dtc\LocalDevelopment\t\F77C06E96830A119E56EFB0EDB243F25
       plugin start time: 2011-12-02 18:28:55 GMT+01:00 (CET)
                 Java VM: Java HotSpot(TM) Client VM, 1.4.2_12-b03 (Sun Microsystems Inc.)
General options:
convert *.xlf to *.properties: yes
include sources for debugging: yes
Checking path lengths for sources
Path length checks finished in 0.016 seconds
Preparing data context..
No public part descriptor found for component "ejb20" (vendor "sap.com"), public part "default", using legacy mode.
No public part descriptor found for component "jms_provider" (vendor "sap.com"), public part "default", using legacy mode.
No public part descriptor found for component "jmsconnector" (vendor "sap.com"), public part "default", using legacy mode.
No public part descriptor found for component "jms" (vendor "sap.com"), public part "default", using legacy mode.
No 'default' JDK defined, will use running VM.
Data context preparation finished in 0.094 seconds
Creating Ant build file..
Creating output file: C:\Documents and Settings\user\.dtc\LocalDevelopment\DCs\acdc.de\pinguin\service\ejb\_comp\gen\default\logs\build.xml
Using Java class:     com.sap.tc.buildplugin.BuildEJBModule
Build file creation finished in 0.046 seconds
Starting Ant..
Using build file:     C:\Documents and Settings\user\.dtc\LocalDevelopment\DCs\acdc.de\pinguin\service\ejb\_comp\gen\default\logs\build.xml
Using build target:   build
Using Ant version:    1.6.2
compile:
      [echo] Start SQLJ Pre-processing
      [sqlj] Using catalog:xml/file/C:\Documents and Settings\user\.dtc\LocalDevelopment\DCs\acdc.de\pinguin\service\dic\_comp\gen\default\public\default\lib\java\acdc.de~pinguin~service~dic~default.jar;D:\usr\nwds\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP-JEE\DCs\sap.com\ejb20\_comp\gen\default\public\default\lib\java\ejb20.jar;D:\usr\nwds\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP-JEE\DCs\sap.com\jms_provider\_comp\gen\default\public\default\lib\java\sapjms.jar;D:\usr\nwds\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP-JEE\DCs\sap.com\jdbc20\_comp\gen\default\public\default\lib\java\jdbc.jar;D:\usr\nwds\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP-JEE\DCs\sap.com\jms\_comp\gen\default\public\default\lib\java\jms.jar;D:\usr\nwds\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\Documents and Settings\user\.dtc\LocalDevelopment\DCs\acdc.de\pinguin\ext\lib\_comp\gen\default\public\compilation\lib\java\acdc.de~pinguin~ext~lib~compilation.jar;C:\Documents and Settings\user\.dtc\LocalDevelopment\DCs\acdc.de\pinguin\ext\lib\_comp\gen\default\public\compilation\lib\java\paygate-1.0.2.jar;D:\usr\nwds\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP-JEE\DCs\sap.com\jmsconnector\_comp\gen\default\public\default\lib\java\jmsconnector.jar;D:\usr\nwds\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP-JEE\DCs\sap.com\servlet\_comp\gen\default\public\default\lib\java\servlet.jar
      [sqlj] translation finished
      [sqlj] 0 warnings
      [sqlj] 0 errors
     [timer] SQLJ Pre-processing finished in 0.828 seconds
      [echo] Starting Java compiler
      [echo] Settings:
      [echo]         debug: on
      [echo]      optimize: off
      [echo]   deprecation: default
      [echo]       verbose: default
      [echo]      encoding: UTF8
      [echo]        source: default
      [echo]        target: default
      [echo] source paths:
      [echo]       C:\Documents and Settings\user\.dtc\LocalDevelopment\DCs\acdc.de\pinguin\service\ejb\_comp\ejbModule
      [echo]       C:\Documents and Settings\user\.dtc\LocalDevelopment\t\F77C06E96830A119E56EFB0EDB243F25\gen_sqlj
      [echo]    class path:
      [echo]       C:\Documents and Settings\user\.dtc\LocalDevelopment\DCs\acdc.de\pinguin\service\dic\_comp\gen\default\compilation\lib\java\paygate-1.0.2.jar
      [echo]       D:\usr\nwds\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP-JEE\DCs\sap.com\jmsconnector\_comp\gen\default\public\default\lib\java\jmsconnector.jar
      [echo]       D:\usr\nwds\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP-JEE\DCs\sap.com\servlet\_comp\gen\default\public\default\lib\java\servlet.jar
      [echo]    output dir: C:\Documents and Settings\user\.dtc\LocalDevelopment\t\F77C06E96830A119E56EFB0EDB243F25\classes
     [javac] Compiling 163 source files to C:\Documents and Settings\user\.dtc\LocalDevelopment\t\F77C06E96830A119E56EFB0EDB243F25\classes
     [javac] ERROR: C:\Documents and Settings\user\.dtc\LocalDevelopment\DCs\acdc.de\pinguin\service\ejb\_comp\ejbModule\de\acdc\pinguin\facade\acdcPinguin001CustomFacade.java:21: package com.hp.cape.persistence.exception does not exist
     [javac] ERROR: import com.hp.cape.persistence.exception.FinderException;
     [javac] ERROR:                                          ^
     [javac] ERROR: C:\Documents and Settings\user\.dtc\LocalDevelopment\DCs\acdc.de\pinguin\service\ejb\_comp\ejbModule\de\acdc\pinguin\facade\acdcPinguin001CustomFacade.java:22: package com.hp.cape.persistence.exception does not exist
     [javac] ERROR: import com.hp.cape.persistence.exception.PersistenceException;
     [javac] ERROR:                                          ^
     [javac] ERROR: C:\Documents and Settings\user\.dtc\LocalDevelopment\DCs\acdc.de\pinguin\service\ejb\_comp\ejbModule\de\acdc\pinguin\facade\acdcPinguin001CustomFacade.java:23: package com.hp.cape.persistence.exception does not exist
     [javac] ERROR: import com.hp.cape.persistence.exception.RemoteServerException;
     [javac] ERROR:                                          ^
     [javac] ERROR: C:\Documents and Settings\user\.dtc\LocalDevelopment\DCs\acdc.de\pinguin\service\ejb\_comp\ejbModule\de\acdc\pinguin\facade\acdcPinguin001CustomFacade.java:24: package com.hp.cape.persistence.filter does not exist
     [javac] ERROR: import com.hp.cape.persistence.filter.FilterCondition;
     [javac] ERROR:                                       ^
     [javac] ERROR: C:\Documents and Settings\user\.dtc\LocalDevelopment\DCs\acdc.de\pinguin\service\ejb\_comp\ejbModule\de\acdc\pinguin\facade\acdcPinguin001CustomFacade.java:96: cannot resolve symbol
     [javac] ERROR: symbol : class RemoteServerException
     [javac] ERROR: location: class de.acdc.pinguin.facade.acdcPinguin001CustomFacade
     [javac] ERROR:   protected Object getHomeStub() throws RemoteServerException
     [javac] ERROR:                                         ^
     [javac] ERROR: C:\Documents and Settings\user\.dtc\LocalDevelopment\DCs\acdc.de\pinguin\service\ejb\_comp\ejbModule
     [javac] ERROR: symbol : class RemoteServerException
     [javac] ERROR: location: class de.acdc.pinguin.facade.acdcPinguin001Facade
     [javac] ERROR:   protected acdcPinguin001SB getacdcPinguin001SB() throws RemoteServerException
     [javac] ERROR:                                                   ^
     [javac] ERROR: C:\Documents and Settings\user\.dtc\LocalDevelopment\DCs\acdc.de\pinguin\service\ejb\_comp\ejbModule\de\acdc\pinguin\facade\acdcPinguin001Facade.java:192: cannot resolve symbol
     [javac] ERROR: symbol : class FinderException
     [javac] ERROR: location: class de.acdc.pinguin.facade.acdcPinguin001Facade
     [javac] ERROR:   public acdcPinguin001DTO findByPrimaryKey(BigDecimal id) throws FinderException, PersistenceException
     [javac] ERROR:                                                               ^
     [javac] ERROR: C:\Documents and Settings\user\.dtc\LocalDevelopment\DCs\acdc.de\pinguin\service\ejb\_comp\ejbModule\de\acdc\pinguin\facade\acdcPinguin001Facade.java:192: cannot resolve symbol
     [javac] ERROR: symbol : class PersistenceException
     [javac] ERROR: location: class de.acdc.pinguin.facade.acdcPinguin001Facade
     [javac] ERROR:   public acdcPinguin001DTO findByPrimaryKey(BigDecimal id) throws FinderException, PersistenceException
     [javac] ERROR:                                                                                ^
     [javac] ERROR: C:\Documents and Settings\user\.dtc\LocalDevelopment\DCs\acdc.de\pinguin\service\ejb\_comp\ejbModule
     [javac] ERROR:                                                                                ^
     [javac] ERROR: C:\Documents and Settings\user\.dtc\LocalDevelopment\DCs\acdc.de\pinguin\service\ejb\_comp\ejbModulePersistenceException
     [javac] ERROR:                                                                                ^
     [javac] ERROR: C:\Documents and Settings\user\.dtc\LocalDevelopment\DCs\acdc.de\pinguin\service\ejb\_comp\ejbModule\de\acdc\pinguin\facade\acdcPinguin002Facade.java:389: cannot resolve symbol
     [javac] ERROR: symbol : class PersistenceException
     [javac] ERROR: location: class de.acdc.pinguin.facade.acdcPinguin002Facade
     [javac] ERROR:   public acdcPinguin002DTO update(acdcPinguin002DTO data) throws PersistenceException
     [javac] ERROR:                                                          ^
     [javac] WARNING: Note: Some input files use or override a deprecated API.
     [javac] WARNING: Note: Recompile with -deprecation for details.
     [javac] 100 errors
Error: C:\Documents and Settings\user\.dtc\LocalDevelopment\DCs\acdc.de\pinguin\service\ejb\_comp\gen\default\logs\build.xml:158: Compile failed; see the compiler error output for details.
     at org.apache.tools.ant.taskdefs.Javac.compile(Javac.java:938)
     at org.apache.tools.ant.taskdefs.Javac.execute(Javac.java:758)
     at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
     at org.apache.tools.ant.Task.perform(Task.java:364)
     at org.apache.tools.ant.Target.execute(Target.java:341)
     at org.apache.tools.ant.Target.performTasks(Target.java:369)
     at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
     at com.sap.tc.buildplugin.techdev.ant.util.AntRunner.run(AntRunner.java:116)
     at com.sap.tc.buildplugin.DefaultAntBuildAction.execute(DefaultAntBuildAction.java:58)
     at com.sap.tc.buildplugin.DefaultPlugin.handleBuildStepSequence(DefaultPlugin.java:196)
     at com.sap.tc.buildplugin.DefaultPlugin.performBuild(DefaultPlugin.java:168)
     at com.sap.tc.buildplugin.DefaultPluginV3Delegate$BuildRequestHandler.handle(DefaultPluginV3Delegate.java:66)
     at com.sap.tc.buildplugin.DefaultPluginV3Delegate.requestV3(DefaultPluginV3Delegate.java:48)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.tc.buildtool.v2.impl.PluginHandler2.maybeInvoke(PluginHandler2.java:350)
     at com.sap.tc.buildtool.v2.impl.PluginHandler2.request(PluginHandler2.java:99)
     at com.sap.tc.buildtool.v2.impl.PluginHandler2.build(PluginHandler2.java:73)
     at com.sap.tc.buildtool.PluginHandler2Wrapper.execute(PluginHandler2Wrapper.java:59)
     at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:1750)
     at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:6004)
     at com.sap.ide.eclipse.component.provider.actions.dcproject.BuildAction.buildDCsForDevConfig(BuildAction.java:307)
     at com.sap.ide.eclipse.component.provider.actions.dcproject.BuildAction.access$200(BuildAction.java:58)
     at com.sap.ide.eclipse.component.provider.actions.dcproject.BuildAction$1.run(BuildAction.java:212)
     at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:101)
Ant runtime 1.265 seconds
Ant build finished with ERRORS
Compile failed; see the compiler error output for details.
Error: Build stopped due to an error: Compile failed; see the compiler error output for details.
Build plugin finished at 2011-12-02 18:28:56 GMT+01:00 (CET)
Total build plugin runtime: 1.562 seconds
Build finished with ERROR

Hi Saurabh Agarwal,
I have double checked this. removed and added the relevant libraries but no luck.
the build log says that it can not find
     [javac] ERROR: C:\Documents and Settings\admitsepedollhofer1\.dtc\LocalDevelopment\DCs\acdc\some\service\ejb\_comp\ejbModule\acdc\some\facade\AcDcSome001CustomFacade.java:21: package com.ap.cape.persistence.exception does not exist
     [javac] ERROR: import com.ap.cape.persistence.exception.FinderException;
Build Path looks like this:
<?xml version="1.0" encoding="UTF-8"?>
<classpath>
    <classpathentry kind="var" path="JRE_LIB" sourcepath="JRE_SRC"/>
    <classpathentry kind="src" path="ejbModule"/>
    <classpathentry kind="src" path="gen_sqlj"/>
    <classpathentry kind="src" path="/LocalDevelopmentcapebaseutilsap.com"/>
    <classpathentry kind="var" path="TSSAP_JAVAX_HOME/lib/ejb20.jar"/>
    <classpathentry kind="lib" path="D:/Projects/some/0/DCs/ap.com/cape/base/utils/_comp/gen/default/public/compilation/lib/java/ap.comcapebaseutilscompilation.jar"/>
    <classpathentry kind="var" path="SAP_LOGGING_LIB_HOME/lib/logging.jar"/>
    <classpathentry kind="var" path="SAP_SYSTEM_ADD_LIBS/comp/SAP-JEE/DCs/sap.com/com.sap.engine.client.lib/_comp/gen/default/public/default/lib/java/sapj2eeclient.jar"/>
    <classpathentry kind="src" path="/DV2_some_Dsomeservicedicacdc.de"/>
    <classpathentry kind="var" path="SAP_EXCEPTION_LIB_HOME/lib/exception.jar"/>
    <classpathentry kind="lib" path="/DV2_some_Dsomeextlibacdc.de/libraries/paygate-1.0.2.jar"/>
    <classpathentry kind="lib" path="/DV2_some_Dsomeextlibacdc.de/libraries/commonsNet.jar"/>
    <classpathentry kind="lib" path="/DV2_some_Dsomeextlibacdc.de/libraries/jakarta-oro-2.0.8.jar"/>
    <classpathentry kind="var" path="TSSAP_JAVAX_HOME/lib/jms.jar"/>
    <classpathentry kind="var" path="TSSAP_JAVAX_HOME/lib/mail.jar"/>
    <classpathentry kind="var" path="SQLJ_RUNTIME"/>
    <classpathentry kind="lib" path="D:/Projects/some/0/DCs/ap.com/cape/base/external/lib/_comp/gen/default/public/compilation/lib/java/CapeJ2eePersistence.jar"/>
    <classpathentry kind="lib" path="D:/Projects/some/0/DCs/ap.com/cape/base/external/lib/_comp/gen/default/public/compilation/lib/java/CapeUtilities.jar"/>
    <classpathentry kind="lib" path="D:/Projects/some/0/DCs/ap.com/cape/base/external/lib/_comp/gen/default/public/compilation/lib/java/Cape.jar"/>
    <classpathentry kind="output" path="bin"/>
</classpath>
How can I make sure that the libraries are included in the build process?

Every time I install itunes i get an error message that says apple application support not found. please help!e

Hi i hope someone can help

With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Method not found Please help!!

import java.sql.Connection;
import java.sql.Statement;
import java.sql.DriverManager;
import java.sql.SQLException;
import java.sql.ResultSet;
import java.io.*;
public class SnappyDriver
          public int j = 0;
public int number[];
public void main(String [] arguments)throws IOException
          Connection connection = null;
Statement statement = null;
          ResultSet rs = null;
          BufferedReader input = new BufferedReader(new InputStreamReader(System.in));
          try
// Load the database drievrs. An ODBC: JDBC bridge
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
System.out.println("Drivers loaded");
// Obtain connection to the database.
connection = DriverManager.getConnection("jdbc:odbc:Questions", "", "");
System.out.println("Connection established");
// Cerate statement to read and write to/from database.
statement = connection.createStatement();
System.out.println("Statement created");
               System.out.println(" ");
               for ( int i = 1; i < 11 ;i++)
                    int ran;
                    ran = ranCheck();
                    //int rnd = ((int) (Math.random ()*10)+1);
                    System.out.print (" " );
                    rs = statement.executeQuery("SELECT * FROM Questions WHERE [Index] = "+ran+" ");
                    rs.next();
                    //execute resultSet printout .
                    System.out.println(" ");
                    System.out.println(" ");
                    System.out.print ("Random no = " + ran );
                    System.out.print (" " );
                    System.out.println("QUESTION NO: " + rs.getString("Index"));
                    System.out.println("->->->-> : " + rs.getString("Questions"));
                    System.out.println("Answer A: " + rs.getString("A"));
                    System.out.println("Answer B: " + rs.getString("B"));
                    System.out.println("Answer C: " + rs.getString("C"));
                    rs.close();
                    System.out.print("Please enter your answer: ");
                    //char responce;// read in 1 byte
                    //char letter = (char) System.in.read();
                    String response = input.readLine();
// Close statement and conenction.
statement.close();
connection.close();
                    catch (ClassNotFoundException cnf)
                         System.out.println("Could not find class: " + cnf);
                    catch (SQLException sqle)
                         System.out.println("SQL problem: " + sqle);
          //The main does not rocognise thid method to produce random numbers
     public int ranCheck()
          // Random method
          while(j<10)
               int rnd = ((int) (Math.random ()*10)+1);
               for(int k=0;k<=j;k++)
                    if (number[k]== rnd)
                         j--;
                         number [j] = rnd;
                         j++;
                         return (rnd);

You still have some misplaced {'s and }'s in there. Look carefully trough your code, and find them. (No, I am not doing it for you. It's not a difficult job, but it's kind of boring :) )
If you always are careful with the indendation, this kind of error is easier it avoid and easier to detect.

New Portable HD not found - Please Help

Hi,
I just purchased an external portable hard drive that's supposed to be "plug and play" for both Mac & Windows OS but my Powerbook isn't even picking up the drive. When I insert the USB (after connecting the cable to the drive, per the instructions) nothing happens at all. I then tried it on my desktop running XP and it found the drive with no problems, installed the included drivers & back up software & it's ready to go.
I've seen in other threads here that Disk Utility or the "Finder" could show the drive even if it doesn't auto-mount to the desk top, but when I go to the finder, nothing there (Unless I'm looking in the wrong place?) and in Disk Utility, I see my PB hard drive but that's it. Here's what I've done so far:
-Tested on different system/OS & external HD works fine
-Tried external HD on both USB ports and neither recognize drive to mount (HD light does power on, however)
-Tested my USB ports on PB with flash drive (Cruzer 4GB)& this drive comes up perfectly as usual; as does my iPod and a laptop fan works as well.
The external HD is a Toshiba 320GB HDDR320E03X.
I'm running a Powerbook G4 1.25 Ghz w/ 10.3.9
If anyone has any ideas how I can get this drive to show up and/or reformat it for the Mac (I'm ok w/ not using it for the desktop now), I'd appreciate it.

Hi, Rolo. If your drive is spinning up, lighting up, making normal noises, etc., but not mounting on the desktop, your Powerbook doesn't supply enough USB bus power for your hard drive. This is a very common Powerbook problem for which there is no direct remedy. You will have to provide power to the drive from another source: a) an AC-powered USB hub; b) an AC adapter connected directly to the drive, if the drive has an input port for one, c) a USB 2 CardBus adapter that comes with its own AC adapter, or d) a "Y" cable such as this one that allows your drive to draw power from both of your Powerbook's USB ports instead of just one.

AMD Radeon Graphics Card Not Found! Please Help HP Envy M6...

Similar Messages

Maybe you are looking for