AMD's Athlon FX beats Intel's Pentium 4 3.2 GHz
Here is a little info hot off the press from The Inquirer. It is all about the new Athlon Processor which is based on the same core technology as the Athlon 64/Opteron:
AMD's Athlon FX beats Intel's Pentium 4 3.2 GHz in almost every way
All we need now is a nice shiny red nForce3 from MSI to go with it!
Take Care,
Richard
Here are the proper specs for your model iMac.
32 GB
Memory Slots
4 - 204-pin PC3-12800 (1600 MHz) DDR3 SO-DIMM
Nnot sure where you are located! but forget using Amazon and go right to the Crucial Memory site and use their memory selector to make sure you get the right memory.
Depemding on where you are from Crucial has four international web locations.
Also, I believe OWC (macsales.com) has international shipping and they have a few international resellers of the their RAM, too! You can call them toll free or by email to find out where to purchase their RAM, also.
Similar Messages
-
MSI K7D Master AMD Dual Athlon MP
OK so I've completed my first Dual Athlon and I'm getting some varied results. here's the specs:
MSI K7D Master AMD Dual Athlon MP Motherboard ATX
Dual 2400+
Antec 350W
various NVIDIA video cards
Kingston 266/512 64X64 DDR
I first tried a Wildcat 5110 but got no video, 3DLabs tells me this mobo has not been tested and cleared by them, so heads-up don't go with this mobo/video combo.
I went to NVIDIA and got video, I set the system jumper to 133MHz. I got a RAM error, change sticks (I have several of the same kind) but get the same result. After several attempts the machine boots and I install WinXP.
Now it is hit and miss sometimes I get the RAM error and the machine just sits there, sometimes it boots but the mouse doesn't work other times it seems to boot fine but the programs (3D Studio Max / Brazil) will just quit for no apparent reason. I set the BIOS to to check the RAM on start-up, it finds no errors.
I really appreciate hearing any ides or from anyone who has attempted this sort of thing before.
LiquidmanVery cool thank you.
Well I got a call back from MSI customer service, they said try going to 'Advanced chipset' and change the 'AGP Fastload' from whatever it is to the opposite state (enable vs disable) I think the default is enable. I tried that, but it was the same if not worse. I reset the BIOS, set the fsb to 100MHz flipped the 'AGP Fastload' and that, of all things worked. Giving credit to the cs department - it did not work without changeing the Fastload state.
I got the 3DS Max/serverrunning and here are some statistics:
Rendered with Brazil, tons pf polygons, reflection and refraction.
Athlon 2500XP (non-Barton) 1gig unbuffered MSI KM4M:
3 hours 15 minutes per frame.
Intel P4 2.4 533MHz fsb 1 gig unbuffered MSI 845GE (northwood)
2 hours 54 minutes minutes per frame.
K7D Master 100Mhz fsb (non-Barton) 1gig unbuffered value ram.
1 hour 15 minutes per frame.
I will try the ecc registered RAM next week. If the results are this good with the jumper set to 100MHz I really looking forward to checking out the 133MHz...
Any suggestions on brand/configuration ?
Liquidman -
Intel(R) Pentium(R) CPU G620 @ 2.60GHz
Hello guys.
Im having a some problems with my CPU.
Since my english is not fluent and im not really a PC Engineer ill try to explain the problem best i can.
Im using MSI Control Center and i think i have some issues with my motherboard / processor.
Frequencies of CPU are very oscilating, they ussualy work at x16.0 but is that good? I mean i see they can work at up to x27.0 so should i maybe set them at x26.0?
If i should do that, can u tell me how? I dont want to hurt my system by doing something that i dont really understand.
Also ive noticed that my iGPU is always at 0 MHz. I dont know what is iGPU exactly but i think this cant be good.
If anyone can tell me how can i make my CPU steady in few simple steps and how to enable iGPU please.
I would be very greatefull to you!
Thanks in advance.Quote from: XFM on 21-November-12, 08:47:56
What motherboard do you have? What other parts are in your system? So far all you tell us is what CPU you have and nothing else. Do you have a separate graphics card or are you using IGPU (Integrated Graphics Processing Unit)? CPU speed will vary depending on load, light load slower speed, heavy load higher speed. If you have a discrete video card then IGPU will be zero.
Since that is a LGA1156 CPU this is posted in the wrong section of the forum, it should be in Intel iX section.
Ive also forgot to mention that im getting Black Screen Bug while playing some games, League of Legends exactly. And i think its somehow related to my CPU, but im not sure.
After i start the game, whole screen goes black and im unable to do anything about it. I cant even ALT+TAB it so i ca see my CPU usage..completely cut off from my PC while this is hapening.
It does hapen always, each time i start the game and it lasts for about 1-2 minutes. Screen is blinking in black like its trying to refresh itself.
Here is complete DxDiag of my PC.
System Information
Time of this report: 11/21/2012, 02:14:37
Machine name: HAZE-PC
Operating System: Windows 7 Ultimate 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.120830-0333)
Language: Serbian (Latin) (Regional Setting: Serbian (Latin))
System Manufacturer: MSI
System Model: MS-7680
BIOS: BIOS Date: 01/13/12 16:03:15 Ver: 04.06.04
Processor: Intel(R) Pentium(R) CPU G620 @ 2.60GHz (2 CPUs), ~2.6GHz
Memory: 4096MB RAM
Available OS Memory: 4078MB RAM
Page File: 2523MB used, 5630MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7601.17514 32bit Unicode
[DXDiag rubbish deleted - Flobelix] -
MSI K8T + AMD 64 Athlon Processor + Corsair 3200, can anybody please help?
i recently have put together a system as follows...
MSI K8T Neo Mainboard
AMD 64 Athlon Processor
Corsair TWINx1024-3200c2pt
i experience random system crashes/reboots/lockups and sometimes on restart i get system message from windows xp saying that "this system has recovered from a serious error" and when i click to view the details of this error.. this is what follow..
C:\WINDOWS\Minidump\Mini123103-03.dmp
C:\DOCUME~1\robby\LOCALS~1\Temp\WER1.tmp.dir00\sysdata.xml
**windowsusername
i was wondering if anybody else has had any problems with this or perhaps if any of you know what could possibly be causing this.
i have all the latest BIOS drviers, Motherboard drivers, and amd chipset drivers.
can anybody help me with this?
thank you.ok heres what i know i have corsair 3200 value select with the same system MSI K8T athlon 64 3200
k just like 6 days ago i took out my motherboard and put in the rest of the motherboard risers the one by the ram had a plastic one in it and i put in all brass ones or whatever they are, and it started to bomb the on me drivers not installing correctly and stuff like what you guys are saying so i just took them back out last night and im gonna reinstall windows again to see if it helps( i reinstalled windows XP pro 5 times yesterday by the way trying to make my Radeon 9800XT work properly with the drivers and have 8x and fast write enabled cause that was messing up also) and i finally got it to where i could install most the drivers but 2 of my hard drives are missing so thats why im reinstalling, windows wont allow me to install the driver in any way so it might be somthing with the risers on the board
it was fine when it was missing the 3 on the end where the ide plugs are and i have my ram in slots 0 and 2 but that didnt seem to matter
so thats just my experience to right now -
Can I install a AMD 3700+ athlon processor in my pavilion zv5000v?
Hi, at the moment it has a 1.8ghz cpu and i want to install a faster one, just wanna know if this is possible. And i need to know what socket type it is before i buy anything! if anyone knows then I'd be grateful
zv5000z and it is a Socket 754 and I believe the fastest processor offered was the AMD 3700+. I had one with a 3400+ and it was a good laptop for me for over 2 years; a long time by my standards. The HP Part number is:
370498-001
http://www.ebay.com/itm/AMD-Mobile-Athlon-64-3700-CPU-socket-754-2-4GHz-1M-AMN3700BKX5BU-Great-/2509... -
K7T266 Pro2 won't recognize my AMD 1800 Athlon...
I just bought a K&T266 Pro2 V2.0 mobo and I have the latest bios V3.7 on it, it doesn't boot up with my AMD Athlon 1800 but did with an AMD 1333 Athlon. I tried clocking at 100 mhz and 133 mhz, but neither worked. Is the AMD Athlon 1800 an XP or not? I know the board only supports Athlons up to 1.4 ghz but a lot higher with XP cpu's. Thanks
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=28&kind=1
if thats your board
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=28
then you need to read this
K7T266pro2 with TBred CPU.... -
Help... my KM4M-L displays Athlon Xp 2000+ as AMD Mobile Athlon 800
Hi guys,
I'm using the motherboard KM4M-L (MS-6734) with CPU Athlon XP 2000+ but it always displays my CPU as AMD Mobile Athlon 800 MHz even though I've already set the jumpers for cpu speed to 133. When I tested setting the cpu speed to 100 it showed my cpu as AMD Mobile Athlon 600 MHz so I assum that the multiplier has been set to 6 from the factory. But wait... it doesn't have the jumpers for setting multiplier! Or the motherboard sets multiplier automatically? What's wrong with my motherboard or cpu? (I'm sure my cpu is Athlon XP 2000+, I've checked by installed it to my friend's machine and that machine displayed the cpu correctly). Could anyone pls help?I concur with Nick. I'm also running the KM4M-L with a 2500+ (pre-week 3/39 unlocked) and there's no way to set multi or FSB in the BIOS.
I've blown the 3rd and 5th L3 bridges on the chip which gives it a default multi of 13 instead of 11. Not much of an overclock, but 2.16Ghz (instead of 1.83Ghz) is about the best I'd expect from default vCore.
Also, just to point out, the Mobile chips (at least in the case of my 2400+) default to the 6x multi, even in my NF7-S 2.0 board. I believe due to the PowerNow technology, they are set to start out at a minimum of 6x multi and can throttle up to as high as 13.5 depending on temp and power settings. (ie. remaining battery life) -
Each time I use a USB,IPHOTO,DVD or VMware Fusion connection the desktop mouse pointer freezes regards Model Name: Regards John
Model Identifier:MacBookPro10.6.8, 2
Model Name: MacBook Pro 10.6.8
Model Identifier: MacBookPro 8.2
Processor Name: Intel Core i7
Processor Speed: 2 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 6 MB
Memory: 4 GB
Boot ROM Version: MBP81.0047.B27
SMC Version (system): 1.69f4
Serial Number (system): C2*******F8V
Hardware UUID: *****
Sudden Motion Sensor:
State: En
<Edited By Host>Hi Allan,
Thank you for your early response, I eventually managed to unZip the requested download, each time I tried the computer froze.
EtreCheck version: 1.9.12 (48)
Report generated 19 July 2014 19:27:23 GMT+01:00
Hardware Information:
MacBook Pro (15-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,2
1 2 GHz Intel Core i7 CPU: 4 cores
4 GB RAM
Video Information:
AMD Radeon HD 6490M - VRAM: 256 MB
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1440 x 900
System Software:
Mac OS X 10.6.8 (10K549) - Uptime: 0 days 0:4:34
Disk Information:
Hitachi HTS545050B9A302 disk0 : (465.76 GB)
- (disk0s1) : 200 MB
Macintosh HD (disk0s2) / : 465.44 GB (58.8 GB free)
MATSHITADVD-R UJ-898
USB Information:
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information:
Apple, Inc. MacBook Pro
Kernel Extensions:
com.NovatelWireless.driver.NovatelWirelessUSBCDCECMControl (3.0.13) Support
com.NovatelWireless.driver.NovatelWirelessUSBCDCECMData (3.0.13) Support
com.ZTE.driver.ZTEUSBCDCACMData (1.3.35) Support
com.ZTE.driver.ZTEUSBMassStorageFilter (1.3.35) Support
com.novamedia.driver.IceraUSB_MSD_Bypass (1.3.0) Support
com.novatelwireless.driver.3G (3.0.13) Support
com.novatelwireless.driver.3GData (3.0.13) Support
com.novatelwireless.driver.DisableAutoInstall (3.0.13) Support
com.option.driver.Option72 (2.15.0) Support
com.option.driver.OptionHS (3.26.0) Support
com.option.driver.OptionMSD (1.21.0) Support
com.option.driver.OptionQC (1.11.0) Support
com.rim.driver.BlackBerryUSBDriverInt (0.0.67) Support
com.rim.driver.BlackBerryUSBDriverVSP (0.0.67) Support
com.tomtom.driver.UsbEthernetGadget (1.0.0d1) Support
com.vmware.kext.vmci (3.1.2) Support
com.vmware.kext.vmioplug (3.1.2) Support
com.vmware.kext.vmnet (3.1.2) Support
com.vmware.kext.vmx86 (3.1.2) Support
com.vodafone.driver (3.0.9) Support
com.vodafone.driver.Data (3.0.9) Support
com.vodafone.driver.DisableAutoInstall (2.0.6) Support
com.zte.driver.cdc_ecm_qmi (1.0.26) Support
com.zte.driver.cdc_usb_bus (1.0.26) Support
de.novamedia.driver.NMSamsung (0.0.2) Support
de.novamedia.driver.NMSmartplugSCSIDevice (1.0.1) Support
de.novamedia.driver.NMUSBCDCACMControl (3.2.12) Support
de.novamedia.driver.NMUSBCDCACMData (3.2.12) Support
de.novamedia.oem.vodafone.vtp.huawei.cdc (0.0.2) Support
net.kromtech.kext.AVKauth (2.3.6 - SDK 10.8) Support
net.kromtech.kext.Firewall (2.3.6 - SDK 10.8) Support
Startup Items:
HWNetMgr: Path: /Library/StartupItems/HWNetMgr
HWPortDetect: Path: /Library/StartupItems/HWPortDetect
Problem System Launch Daemons:
de.novamedia.nmnetmgrd.plist Support
Launch Daemons:
com.adobe.fpsaud.plist Support
com.citrixonline.GoToMyPC.CommAgent.plist Support
com.trusteer.rooks.rooksd.plist Support
com.vmware.launchd.vmware.plist Support
com.zeobit.MacKeeper.AntiVirus.plist Support
Launch Agents:
com.citrixonline.GoToMyPC.LaunchAgent.plist Support
com.conduit.loader.agent.plist Support
com.epson.ews.launcher.plist Support
com.hp.devicemonitor.plist Support
com.hp.messagecenter.launcher.plist Support
com.trusteer.rapport.rapportd.plist Support
de.novamedia.VodafoneDeviceObserver.plist Support
User Launch Agents:
com.adobe.ARM.[...].plist Support
com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
com.google.keystone.agent.plist Support
com.zeobit.MacKeeper.Helper.plist Support
User Login Items:
VMCStatusMenu
Dropbox
Vodafone Mobile Broadband
HP Product Research
Internet Plug-ins:
Flip4Mac WMV Plugin: Version: 2.4.4.2 Support
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
JavaAppletPlugin: Version: 13.9.8 - SDK 10.6 Check version
AdobePDFViewerNPAPI: Version: 10.1.7 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Support
AdobePDFViewer: Version: 10.1.7 Support
QuickTime Plugin: Version: 7.6.6
Google Earth Web Plug-in: Version: 7.1 Support
GarminGpsControl: Version: 4.0.4.0 Release - SDK 10.6 Support
Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.7
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.2
3rd Party Preference Panes:
Flash Player Support
Flip4Mac WMV Support
GoToMyPC Preferences Support
Trusteer Endpoint Protection Support
Top Processes by CPU:
18% mdworker
7% WindowServer
2% Dock
2% Vodafone Mobile Broadband
1% SystemUIServer
Top Processes by Memory:
242 MB AntiVirus
78 MB Dropbox
53 MB WindowServer
45 MB rapportd
37 MB MacKeeper Helper
Virtual Memory Information:
2.00 GB Free RAM
864 MB Active RAM
182 MB Inactive RAM
995 MB Wired RAM
164 MB Page-ins
0 B Page-outs
I appreciate your assistance in this problem
Regards
John (omegajon) -
Temperature Range Of Pentium 4 3.0 GHz Northwood
Hi
I have been trying to find out what the safe operating temperatures are for my Pentium 4 3.0 GHz Northwood Processor (Socket 478 µPGA 130nm).
Can anyone help?
ThanksHi
Having had a complete disaster a couple of years ago with my Mobo and Processor failing I am now very nervous regarding operating voltages and temperatures. Despite the system supposedly shutting down when the temperatures rise to a dangerous level it didn't so I am now monitoring my PC (including the Processor) using Speedfan.
Since having the Mobo and Processor replaced I find that the processor rarely exceeds 30-40 °C with perhaps the occasional "blip" to 50 in some rare circumstances so have Speedfan set to sound an alarm at >50°C. I have no doubt that this is a very conservative figure but without any specification for the working temperature range for this processor I chose what appeared to be my all time high. From what you are suggesting I could well increase this threshold quite considerably.
Speedfan appears to be operating quite accurately as it seems to agree with the readings I get from SiSandra.
A definitive Intel specification for the operating temperature for my processor would therefore be most useful. -
have early 2007 MacBookPro, Intel core 2 duo, 2.16 GHz; six mos ago expanded memory to 3GB to upgrade software to Snow Leopard; can I install Mountain Lion on my hardware?
Supported
Models
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
Xserve (Early 2009)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer) -
iMac 24" iMac (iMac7,1), Intel Core 2 Duo 2,8 GHz Ram 4 MB running OS 10.6.8: impossible upgrade to Mac OSX Mavericks. Already created second account, according to apple online support, but still doesn't work. Thanks for help.
Your Mac is definitely one of the supported models? http://www.apple.com/uk/osx/specs/
If so, what happens when you try to download? Is it a case of nothing happens? If so, take a look at the suggestions under 'Stalled Download' in this link:
http://www.wired.com/gadgetlab/2013/10/mavericks-issues-and-fixes/#slideid-23477 1
Also, some usrs have found that logging out of the Mac App Store and then back in again and starting over has kick-started the download. It seems that the 5+gb download can take a long time to give any feedback as to what's happening. -
Is the os x Mavericks can be installed for my macbook pro (intel core 2 duo, 2.66 GHz, 4 GB ram?) ?
See: OS X Mavericks: System Requirements
-
I hav an iMac Intel Core 2 Duo 2.4 GHz 10.6.8 - I want to use th cloud - is this upgradable to Mountain Lion?
This page lists the compatible Macs - it depends on when you bought it:
http://www.apple.com/osx/specs/ -
Will Lion 10.7.x run on a 63-month old MacBook Pro 17", MacBook Pro 2,1 (2GB RAM) with Intel Core 2 Duo, 2.33 GHz ?
Currently running Leopard 10.5.8 and about to update to Snow Leopard.It will run, if that's what you want. I'd think twice though. If you want to try Lion, upgrade your RAM to the max: 4GB's(Apple says 3, but your machine will run 4), however only a little over 3GB's will be able to be addressed(limitation of your computer). IMO, Lion needs a minimum of 4GB's of RAM to function properly. In your case, you'd be a little shy. I'd suggest you go to SL & stay there.
-
Hi everyone. I have a MacBookPro3,1 Intel Core 2 Duo, 2.4 GHz with 4GB Ram — will it run Mountain Lion? My hard drive has 615 Gigs of free space. If so, is it worth it for me to upgrade? Will all the new features be available to me. Presently I am running Mac OS X Lion 10.7.4 (11E53). I heard that there is an update 8.1 out there with developers as of yesterday.
Thanks.Hi John.
Yes, an erase and install sounds like a good idea. I just need to check my Adobe CS5 software to see if I need to upgrade the suite. If that is the case, then I may need to put it off for a bit. Thanks so much for your help.
I have a newer MacBook Pro at work, but usually wait to upgrade it, till I've been running it at home on my personal computer for a while. Would hate for it to mess up my production schedule.
Thanks again and have a good evening.
Maybe you are looking for
-
As mentioned in link http://download.oracle.com/javase/6/docs/technotes/guides/jweb/mixed_code.html For applications and applets that are designed to allow unsigned components, the Trusted-Library attribute should be used. No warning dialog will be d
-
How to write select statement in XSL-FO type XML program
Hi All, Could you please anyone explain briefly how to write select statement in XSL-FO XML Program. Requirement: In the seeded program, OAF page is creating one XML file and through XSL-FO type XML Pulisher loading data and generating PDF output. as
-
Question to new MacBook owners
I've just got a MB and checking its Application/utilities folder I find the following files: iMac firmware updater iMac SMC firmware update I just find it strange that it would say iMac when it's MB. And I only get error messages when I try to run th
-
BT netprotect...updated yesterday and now won't ac...
Hi! During yesterday BT netprotect updated itself and I thought all was ok. Turned on the PC this morning to find a windows message saying security was at rislk and firewall and anti viral software were not turned on. Cliked 'turn on' and seemed OK b
-
Hi. I'm running the ODI Demo Environment. I'm trying to create a Data Server using settings: JDBC driver: oracle.jdbc.driver.OracleDriver JDBC URL: jdbc:oracle:thin:@localhost:1521:XE but I got the error: java.sql.SQLException: Io exception: The Netw