AME CC 2014 (latest) when I import a file, the last pre-set I used is automatically applied to the file

And I can't seem to find a way to stop this behavior.
If I control click on the preset below the file in the Queue Pane and select remove, it deletes the preset and the file from the Queue.
Any help appreciated.
thanks
MtD

I seem to recall the previously, when I imported a file into AME, no preset was applied until I selected one. Is that incorrect?
Or is the correct workflow to select the preset, then import the file?
As it is now, I have one extra step if I happen to not want the preset that was applied on import, I need to delete it - after adding the preset I do want. Seems an odd way to work to me.
MtD

Similar Messages

I am editing a video in MP4 in Premiere 2014 cc When I import to Indesign 2014 cc gives the error message.

I am editing a video in MP4 in Premiere 2014 cc When I import to Indesign 2014 cc gives the error message.

I'm sorry for a MOST obvious couple of questions, but we need to get them out of the way...
Exactly HOW are you switching layers? If by clicking with the mouse, exactly where on the layer panel are you clicking with the mouse?
-Noel

So I download photoshop cc (2014) and when I go to open the program, it gives me an error message and shuts the program down. It says," A problem cause the program to stop working correctly. Windows will close the program." Can someone help me please?

So I download photoshop cc (2014) and when I go to open the program, it gives me an error message and shuts the program down. It says," A problem cause the program to stop working correctly. Windows will close the program." Can someone help me please?

I've got the same issue and it affects all my adobe software. You are not alone as I have seen several postings looking for the answer to this help request.

I have a Nikon S6300 and when I import into iPhoto the photos don't show up in events or photos only in recent imports

I just purchased a Nikon S6300 camera and when I import into iPhoto the photos don't show up in either photos or events only in recent imports.
I have Snow Leopard on my MacMini.

Control-click one of the photos under the Recent import and select "Show Event" in the contextual menu. Or you can use the View ➙ Sort Events menu in the Events mode to reset the sort order so the new import will be either at the top or bottom of the list.
OT

The new event are created when i import photo in the top. Before they where put in the end. All my event are classified. Where i can set the event at the end ? Thank's.

The new event are created when i import photo in the top.
Before they where put in the end.
All my event (around 600) are classified on the top the old and a the end the new.
Where i can set the event at the end ?
Thank's.

View menu ==> sort events
LN

Im trying to make a simple 360 rotation for a 3d logo in CC 2014 but when i tried to create the 1st key frame the image when out axis

im trying to make a simple 360 rotation for a 3d logo in CC 2014 but when i tried to create the 1st key frame the image when out axis

I find that if you have multiple 3d object they must be merged into a single 3d layer their positions reset to align to the same axises then sized and positioned along them. The layer should then be able to be animated well around an axis like the y axis. Here a Sphere, Cylinder and ring. http://www.mouseprints.net/old/dpr/McAssey-CC.mp4

After Effects CC: When I import .MOD video, the right side is cut off in the viewer.

After Effects CC: When I import .MOD video, the right side is cut off in the viewer. I've tried everything. Any suggestions?

I just started using After Effects, so I'm new to all of this. All I can find on the media player is "fit to window".

When I import my files only the audio plays back not the video. If I export the sequence its there?

When I import my files only the audio plays back not the video. If I export the sequence its there?
I am new to Premiere having just downloaded the 30 day trial yesterday, I jumped straight in and imported all of my files from my video camera however in Premiere only the audio plays back with the displays just showing a black space.
Out of curiosity I dragged three or four shots into the sequence editor and then exported them and played this through VLC and the video was there?
As I said I am completely new to Premiere having only spent around 3 or 4 hours with it in the past, I read a few forum threads around similar issues but couldn't find any solutions and as I am trying to edit together a short film for a college project due in soon I need to try and find a way to fix this A.S.A.P
Any help would be appreciated and if theres any more info I can provide please let me know.
Thanks
Drew

Being new, I'm sure you don't know about the NEW ITEM process, so click/read about that at this link
CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923
Also, More information needed for someone to help... please click below and provide the requested information
-PPro Information FAQ http://forums.adobe.com/message/4200840
What is your exact brand/model graphics adapter (ATI or nVidia or ???)
What is your exact graphics adapter driver version?
Have you gone to the vendor web site to check for a newer driver?
For Windows, do NOT rely on Windows Update to have current driver information
-you need to go direct to the vendor web site and check updates for yourself
ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
Exactly what are you editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

When I import a ablum the songs show up as albums

When I import a ablum the songs show up as albums how do add all the song as an ablum

Generally all you need to do is fill in an appropriate Album Artist. For more details see my article on Grouping Tracks Into Albums, in particular the topic One album, too many covers.
tt2

When I import PSD file then Catalyst stopped working why?

HI,
When I import PSD file then Catalyst stopped working .why? it's a BUG?
Please find the attached image

I'm an a mac, and I haven't had the problem, so I'm not the best for advice. That said, I am sure FC on the pc can import .psd file. I would check the psd for anything "abnormal". If it is a complicated file, simplify as much as possible, flatten effects especially.
**Upload the psd, I could try to import it and upload a fxp

When I import .jpg files they sparodically turn to black. Any suggestions?

I am using Premier Pro CS3. When I import .jpg files, they suddenly turn to black. Any suggestions?

Dan Isaacs wrote:
I also think that JPEGs themselves can be sometimes problematic in CS3. You may also want to try converting them to PSD or BMP.
As I remember from discussions on the old forum...
Depending on how the JPG was created (which software and/or which camera) there is sometimes "extra" information inside the file header that confuses Premiere since it is not part of the basic file specification
Solution was to open in Photoshop (or, rarely, a non-Adobe program) and save to a new name or, as Dan says, to a different format

Artifacts when I import .avi file to After Effects (and Premiere)

Hi,
I'm having some issues with After Effects that I can't figure out. I've got a video file in .avi that loads and plays fine by itself, but when I import it to edit in After Effects 5.5, I get strange artifacts during playback, and they even translate to the final export. I get the same issue when I try to import and render in Premiere. I have the sequence matching what the video file is, and even right clicked the file,and interpreted the footage for the project to match the video file to be sure, but with no successes at figuring it out. Can anyone tell me what I'm doing wrong here?
I get the same issue regardless of me being on my desktop or laptop. I'm using Windows 7 on both computers.
Per the questions I should ask:
What exact version of After Effects? Include the minor version number---e.g., After Effects CC (12.2.1) or After Effects CS6 (11.0.4). Do not just say "After Effects with the latest updates" or "After Effects CC"; give the specific version number. 10.5.0.253
Have you installed the recent updates? (If not, you should. They fix a lot of problems.) Yes
What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac". Windows 7
If you are getting error message(s), what is the full text of the error message(s)? No messages.
What were you doing when the problem occurred? What is the exact sequence of steps that you are taking? Importing and test ram preview and or rendering.
Has this ever worked before? If this worked before by doesn't work now, what has changed on your computer in the intervening time? First time i've tried this.
Tell us about your computer hardware. Include CPU type and number of processor cores, amount of RAM installed, GPU, number and sizes of connected monitors, number of disk drives, and how any external drives are connected. Intel i5 2500k 3.3GHz, 8GB ram, 64b OS, 2 monitors, 3 hard drives. AMD Radion 6900
What versions of drivers for your graphics hardware do you have installed (including CUDA driver and driver for display adapter)? 13.12
Do you have any third-party I/O hardware (e.g., AJA, Matrox, Blackmagic, MOTU)? No
What kind(s) of source footage? When telling about your source footage, tell us about the codecs, not just the container types. For example, "H.264 in a .mov container", not just "QuickTime". .avi
Do you have QuickTime installed. (You should.) If so, what version? The answer should be specific, such as "QuickTime 7.6.2". yes, 7.7.5
What other software are you running? none
Do you have any third-party effects or codecs installed? none that I know of.
Are you using OpenGL features in After Effects? I think so, it's enabled.
Does the problem only happen with your final output, RAM preview, or both? both
Are you using Render Multiple Frames Simultaneously multiprocessing? no
Are you using the ray-traced 3D renderer? no
If the problem is with output, give your exact output settings (both render setting and output module settings). Screenshots help. 2014-11-13_1514 - Tetra84's library
Here is a screenshot of the issue that I'm talking about:
glitch - Tetra84's library
2014-11-13_1514 - Tetra84's library

See this thread on the Camtasia forums in which one of the Camtasia software engineers recommends against using the TSC2 codec for use in applications outside of their suite:
https://feedback.techsmith.com/techsmith/topics/avis_created_with_camtasia_studio_8_do_not _play_on_other_computers
I'd ask on the Camtasia forums what codec they do recommend and how they recommend transcoding your existing TSC2 files.

When I import a cd the files are written into separate folders. I want all the tunes in one folder. How do I do that?

How do I get all the files on a cd into a single folder when I import them in iTunes? It seems to be a wild horse, splitting a cd up into files with one, two, three, or accasionally all of the tunes in one files.

No, that doesn't do it. I just tried to import an opera aria album, all tracks by the same tenor, and he is listed on each. iTunes split it into four albums. On earlier versions I could join tracks, but I don't see any way of doing that in the latest version of iTunes. The help section says to mark all the tracks and then click on the options button and a menu allowing join tracks will appear. It doesn't.
Here's another problem: iTunes consistently truncates the first two tracks, i.e. it eliminates them altogether. Help.

Why does my itunes stop working when I import a file?

I can now only start iTunes in safe mode, and if I import a file, it stops working. Help/

iTunes is not fully functional when operating in Safe Mode, so its possible that the component that supports Audible content is not running. If iTunes will only run in Safe Mode then there's an issue with your installation - see Turingtest2's tutorial Troubleshooting issues with iTunes for Windows updates, in particular the section on removing all components of iTunes before installing the latest version.
I have Audible .aa files on a 2nd gen iPod Nano so there shouldn't be an issue with age ...

After Effects CS5.5 Stops responding when I import .mov files from VideoCopilot

Okay so I have a personal movie project that is in my mind so I opened After Effects and wanted to import an explosion.mov file to the video clip from Action Essentials. It worked a month ago but now for some reason right when I import the .mov clip, it crashes... I have After Effects CS4 and CS5.5 and when I import the same exact .mov file to CS4, it works. I have the latest version of quicktime, can anyone help me? Here is a video link for the problem: http://www.youtube.com/watch?v=60JqDeMJBmo&feature=youtu.be

First off, my system specs:
CPU: Intel Core i7 2600k CPU @ 3.40 GHz (8 CPUs)
Memory: 12 GB Corsair Vengeance 12288MB RAM
GPU: Nvidia GTX 580 Superclocked SLI (x2)
DirectX: DirectX11
OS: Windows 7 Ultimate
After Effects CS5.5 Version 10.5, I installed all the recent updates, the footage I was using was from video copilot, I didn't get any error messages when I put the footage in, After Effects just freezes up when I put the footage in. I was using Adobe Bridge in the background to import the clips, but I also tried importing in a different way by just plainly dragging and dropping the clips from the folder, I have not downloaded any third party codecs.
I've tried the troubleshooting, all of the solutions in the link you gave me, but none of them worked, I turned off the firewall. You can see what happens when I import the .mov clips in After Effects in the video link on the very first post of this thread. But suprisingly, the .mov files work in CS4 but not in CS5.5.

AME CC 2014 (latest) when I import a file, the last pre-set I used is automatically applied to the file

Similar Messages

Maybe you are looking for