AME CC 2014 Rendering with only One Core

This seems to have just begun recently (within the past month) where AME CC 2014 is only using 1 core (out of 12) to render video. No, this is not the CPU Parking issue - I have made the regedit tweaks and also changed my Power option to Performance, all with no difference in AME. Premiere Pro CC 2014 renders the same video just fine using all 12 cores, so it seems this problem lies not with Windows software, nor Premiere Pro, but just AME CC 2014. Was there a recent AME update that might have included this bug?
Adobe, please look into this and resolve it ASAP. Not being able to queue up video renders is killing my productivity.

I just installed Premiere Pro CC 2014 this week and had the same problem, my media encoding time tripled (3 times longer).
The same sequence in Premiere Pro CC (Old Media Encoder ) still encoded at its normal fast speed.
Only one of my eight cores was running during encoding in Premiere Pro CC 2014.
After making the registry changes (below) all eight cores were running and Premiere Pro CC 2014 Encoder was back to normal speed.
Read Below:
I did a search and found this link below.
Go to this link below and read.
https://forums.adobe.com/thread/1506298
After you have read the Adobe Forum link above, go to this link below.
This registry change is for Windows 7, I'm not sure about Windows 8
The registry link may be different but you can still look.
Than call Adobe and have their tech go to this link below.
Than have them suggest what to do.
I did call Adobe back and told them it fixed my problem and they were appreciative and said they would pass it on to all their techs.
http://ultimatecomputers.net/forum/viewtopic.php?f=7&t=3644
Just a note,
I was in touch with Adobe earlier this week with this same problem.
I gave them control of my computer (from India) and after an hour the tech concluded it must be my video card causing the problem.
I am using a Nvidia GTX 560Ti, which is not a certified card. I preformed the card hack.
After getting off the phone with them I did some additional test and found that my old AME rendered my sequences with all eight cores.
The new AME CC 2014 was only using one core.
This registry change above keeps all the cores running.
After I made the change all the cores were running during encoding and the speed was back to normal.
Hope this helps,
The Video Guy

Similar Messages

Issue with only one client - The client version 5.00.7958.1000 does not match the MP version 5.00.7711.0000. The client will not be installed.

Below issue is with only one client in that untrusted domain. So boundary is not the issue.
Env -
mydom.com has SCCM PRI site (MP, DP as well).
Client is in untrusted forest.
Please help.
Thanks
MP 'mysccm.mydom.com' is compatible ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Retrieved 1 MP records from AD for site 'pri' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Retrived site version '5.00.7958.1000' from AD for site 'pri' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
SiteCode:         pri ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
SiteVersion:      5.00.7958.1000 ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Ccmsetup is being restarted due to an administrative action. Installation files will be reset and downloaded again. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Deleted file C:\Windows\ccmsetup\client.msi ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Only one MP mysccm.mydom.com is specified. Use it. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Searching for DP locations from MP(s)... ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Current AD site of machine is Default-First-Site-Name LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
Local Machine is joined to an AD domain LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
Current AD forest name is staging.local, domain name is staging.local LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
DhcpGetOriginalSubnetMask entry point is supported. LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
Begin checking Alternate Network Configuration LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
Finished checking Alternate Network Configuration LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
Sending message body '<ContentLocationRequest SchemaVersion="1.00">
<AssignedSite SiteCode="pri"/>
<ClientPackage/>
<ClientLocationInfo LocationType="SMSPACKAGE" DistributeOnDemand="0" UseProtected="0" AllowCaching="0" BranchDPFlags="0" AllowHTTP="1" AllowSMB="0" AllowMulticast="0"
UseInternetDP="0">
    <ADSite Name="Default-First-Site-Name"/>
    <Forest Name="staging.local"/>
    <Domain Name="staging.local"/>
    <IPAddresses>
<IPAddress SubnetAddress="10.72.117.0" Address="10.72.117.134"/>
<IPAddress SubnetAddress="10.72.117.0" Address="10.72.117.142"/>
    </IPAddresses>
</ClientLocationInfo>
</ContentLocationRequest>
' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Sending message header '<Msg SchemaVersion="1.1"><ID>{5B972249-B931-4739-9EFA-A9FDE29C351A}</ID><SourceHost>STAGINGSRVR07</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:STAGINGSRVR07:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>mysccm.mydom.com</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-11-04T17:14:55Z</SentTime><Body
Type="ByteRange" Offset="0" Length="1264"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
CCM_POST 'HTTP://mysccm.mydom.com/ccm_system/request' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Content boundary is '--aAbBcCdDv1234567890VxXyYzZ' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Received header '<Msg SchemaVersion="1.1">
<ID>{D4EF0A4D-A000-4697-9AFA-B1317B09931D}</ID>
<SourceID>GUID:21298681-5080-4365-B614-F0C8DF67452B</SourceID>
<SourceHost>pri1SCCM02</SourceHost>
<TargetAddress>direct:STAGINGSRVR07:LS_ReplyLocations</TargetAddress>
<ReplyTo>MP_LocationManager</ReplyTo>
<CorrelationID>{00000000-0000-0000-0000-000000000000}</CorrelationID>
<Priority>3</Priority>
<Timeout>600</Timeout>
<TargetHost>STAGINGSRVR07</TargetHost><TargetEndpoint>LS_ReplyLocations</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-11-04T17:14:55Z</SentTime><Body Type="ByteRange"
Offset="0" Length="2408"/><Hooks><Hook3 Name="zlib-compress"/><Hook Name="authenticate"><Property Name="Signature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roperty><Property
Name="AuthSenderMachine">pri1SCCM02;mysccm.mydom.com;</Property><Property Name="MPSiteCode">pri</Property></Hook></Hooks><Payload Type="inline"/></Msg>' ccmsetup 11/4/2014 12:14:55
PM 4816 (0x12D0)
Received reply body '<ContentLocationReply SchemaVersion="1.00"><ContentInfo PackageFlags="16777216"><ContentHashValues/></ContentInfo><Sites><Site><MPSite SiteCode="pri" MasterSiteCode="pri"
SiteLocality="LOCAL" IISPreferedPort="80" IISSSLPreferedPort="443"/><LocationRecords><LocationRecord><URL Name="http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002"
Signature="<ADSite">http://mysccm.mydom.com/SMS_DP_SMSSIG$/pri00002"/><ADSite Name="CSSG-Mount-Laurel"/><IPSubnets><IPSubnet Address="10.72.117.0"/><IPSubnet
Address=""/></IPSubnets><Metric Value=""/><Version>7958</Version><Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities><ServerRemoteName>mysccm.mydom.com</ServerRemoteName><DPType>SERVER</DPType><Windows
Trust="0"/><Locality>LOCAL</Locality></LocationRecord></LocationRecords></Site></Sites><ClientPackage FullPackageID="pri00002" FullPackageVersion="2" FullPackageHash="03CFD97C8FB5F7E7E9F177FD6D30D6F25ED106E517E69B715695A0E81DB1D9AF"
MinimumClientVersion="5.00.7958.1000" RandomizeMaxDays="7" ProgramEnabled="false" LastModifiedTime="30388855;1262113920" SiteVersionMatch="true" SiteVersion="5.00.7958.1000" EnablePeerCache="true"/><RelatedContentIDs/></ContentLocationReply>'
ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Found local location 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Discovered 1 local DP locations. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
PROPFIND 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Got 401 challenge Retrying with Windows Auth... ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
PROPFIND 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Failed to correctly receive a WEBDAV HTTP request.. (StatusCode at WinHttpQueryHeaders: 401) ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Failed to check url http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002. Error 0x80004005 ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Enumerated all 1 local DP locations but none of them is good. Fallback to MP. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
GET 'HTTP://mysccm.mydom.com/CCM_Client/ccmsetup.cab' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
C:\Windows\ccmsetup\ccmsetup.cab is Microsoft trusted. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Successfully extracted manifest file C:\Windows\ccmsetup\ccmsetup.xml from file C:\Windows\ccmsetup\ccmsetup.cab. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Loading manifest file: C:\Windows\ccmsetup\ccmsetup.xml ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Successfully loaded ccmsetup manifest file. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Checking if manifest version '5.00.7958.1000' is newer than the ccmsetup version '5.0.7958.1000' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Running from temp downloaded folder or manifest is not newer than ccmsetup. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Adding file 'HTTP://mysccm.mydom.com:80/CCM_Client/x64/client.msi' to BITS job, saving as 'C:\Windows\ccmsetup\client.msi'. ccmsetup 11/4/2014 12:14:56 PM 4816 (0x12D0)
Starting BITS download for client deployment files. ccmsetup 11/4/2014 12:14:56 PM 4816 (0x12D0)
Successfully completed BITS download for client deployment files. ccmsetup 11/4/2014 12:14:57 PM 4816 (0x12D0)
Successfully downloaded client files via BITS. ccmsetup 11/4/2014 12:14:57 PM 4816 (0x12D0)
Validated file 'C:\Windows\ccmsetup\client.msi' hash 'A5732CE24F2B1545E9FBA458971E0A5504093E0F743CA9E8BD9C047582902878' ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
Retrieved client version '5.00.7958.1000' and minimum assignable site version '5.00.7845.1000' from client package ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
Checking compatibility of site version '5.00.7958.1000', expect newer than '5.00.7845.1000' ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
Site version '5.00.7958.1000' is compatible. Client deployment will continue. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
An MP exists on this machine. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
The client version 5.00.7958.1000 does not match the MP version 5.00.7711.0000. The client will not be installed. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
A Fallback Status Point has not been specified. Message with STATEID='318' will not be sent. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
InstallFromManifest failed 0x80004005 ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
CcmSetup failed with error code 0x80004005 ccmsetup 11/4/2014 12:14:58 PM 3680 (0x0E60)

Why two primary that is 'coz geographically based server support and workstation. You can think it as a data center to data center split.
That doesn't make sense and aren't valid reasons for 2012 (not that you can necessarily change it now).
This line jumps out at me in the log file though: "An MP exists on this machine".
That looks like the system you are installing on previously had an MP on it. I would delete the ccm namespace in WMI, cleanup all reference to ccm and Configuratin Manager from the registry, and then try again.
Jason | http://blog.configmgrftw.com | @jasonsandys

Oracle utilizes only one core out of 8 core's.

Dear Team ,
We have noticed that, in oracle database server Oracle processes uses only one core and that goes to 100% usage remains are at idle possition thats the reason the Oracle performance is very poor some time system haults and needs to be started
Please suggest if you can have best solution,
waiting for your valueable response.
Regards,
Naveed Amir

860707 wrote:
We have noticed that, in oracle database server Oracle processes uses only one core and that goes to 100% usage remains are at idle possition thats the reason the Oracle performance is very poor some time system haults and needs to be startedNot unusual. It is often slower running processes across CPUs (e.g. 5 processes on 5 CPUs with 15% CPU utilisation per CPU), than running these processes on the same CPU (e.g. 5 processes on 1 CPU for a 75% CPU utilisation). See Non Uniformed Memory Access (NUMA) for some details on why this is the case.
The kernel deals with CPU scheduling. It decides which process/thread to execute on which CPU. From a s/w perspective, one can code "processor affinity" into your s/w to bind a process or thread to a specific CPU. Oracle only does this with Oracle XE - as this is one of limitation of the free version of Oracle's database s/w. Oracle uses default kernel scheduling for Standard Edition and Enterprise Edition versions.
Oracle uses the number of CPUs/cores to determine the processor load it can create. It does not force its processes to run on a single specific CPU (with XE being the exception).
So "blaming" Oracle for what you are seeing? You are blaming the wrong layer in the s/w stack. You are also very likely misinterpreting what you are seeing.
The #1 reason for poor Oracle performance is shoddy code. Code that you and your cohorts write and run in Oracle. And that is a far likelier candidate to blame for shoddy performance, than blaming Oracle and the kernel's process scheduling across CPUs.
And you have provided not a single shred of evidence that points to a SMP scheduling issue across multiple CPUs/cores.

Second mac in cluster uses only one core

Hello all. For some reason the second computer in my render farm is using only one core out of eight.
I'm using 2 Mac Pros linked together directly via giga ethernet wire. Mac one is a Quad Core 3ghz. Mac two is a Octo Core 2009 model. Both computers have the same version of FCS3 with different serial numbers.
In the Qmaster preferance pane: Mac one is set to "Quickcluster with services" with the check boxes for Share and Managed next to "Distributed processing for Compressor" checked. 4 instances selected and "Include unmanaged services from other computers" checked. Mac two is set to "Services only" with check box for Share next to "Distributed processing for Compressor" checked. 8 instances selected and "Include unmanaged services from other computers" checked.
I hit submit in Compressor, select the name of the cluster from Mac one, then in the Batch Monitor I see the video divied into 10 sections with Mac one handling 4 and Mac two handling one. On Mac two I see that the cores aren't fired up 100%, more like 30% on average.
I did a test earlier with a dual core mbp, and again only one core. How do I get my Octo core to use all 8 cores?

Solved the problem. The solution was simple, but somehow went under my radar. On Mac two in the Qmaster preferance pane next to the "Options for selected service" button, the selected service was set to off.
Duh

SQL Server 2012 Undetected Deadlock in a table with only one row

We have migrated our SQL 2000 Enterprise Database to SQL 2012 Enterprise few days ago.
This is our main database, so most of the applications access it.
The day after the migration, when users started to run tasks, the database access started to experiment a total failure.
That is, all processes in the SQL 2k12 database were in lock with each other. This is a commom case of deadlock, but the Database Engine was unable to detect it.
After some research, we found that the applications were trying to access a very simple table with only one row. This table has a number that is restarted every day and is used to number all the transactions made against the system. So, client
applications start a new transaction, get the current number, increment it by one and commit the transaction.
The only solution we found was to kill all user processes in SQL Server every time this situation occurs (no more than 5 minutes when all clients are accessing the database).
No client application was changed in this migration and this process was working very well for the last 10 years.
The problem is that SQL 2k12 is unable to handle this situation compared to SQL 2k.
It seems to occurs with other tables too, but as this is an "entry table" the problem occurs with it first.
I have searched internet and some suggest some workarounds like using table hints to completely lock the table at the begining of the transaction, but it can't be used to other tables.
Does anyone have heard this to be a problem with SQL 2k12? Is there any fixes to make SQL 2k12 as good as SQL 2k?

First off re: "Unfortunatelly, this can't be used in production environment as exclusive table lock would serialize the accesses to tables and there will be other tables that will suffer with this problem."
This is incorrect.
Using a table to generate sequence numbers like this is a bad idea exactly because the access must be serialized. Since you can't switch to a SEQUENCE object, which is the correct solution, the _entire goal_ of this exercise to find a way to properly
serialize access to this table. Using exclusive locking will not be necessary for all the tables; just for the single-row table used for generating sequence values with a cursor.
I converted the sample program to VB.NET:
Public Class Form1
Private mbCancel As Boolean = False
Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
Dim soConn As ADODB.Connection
Dim soRst As ADODB.Recordset
Dim sdData As Date
Dim slValue As Long
Dim slDelay As Long
'create database vbtest
'go
' CREATE TABLE [dbo].[ControlNumTest](
' [UltData] [datetime] NOT NULL,
' [UltNum] [int] NOT NULL,
' CONSTRAINT [PK_CorreioNumTeste] PRIMARY KEY CLUSTERED
' [UltData] Asc
' )WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON, FILLFACTOR = 80) ON [PRIMARY]
' ) ON [PRIMARY]
mbCancel = False
Do
' Configure the Connection object
soConn = New ADODB.Connection
With soConn
.ConnectionString = "Provider=SQLNCLI11;Initial Catalog=vbtest;Data Source=localhost;trusted_connection=yes"
.IsolationLevel = ADODB.IsolationLevelEnum.adXactCursorStability
.Mode = ADODB.ConnectModeEnum.adModeReadWrite
.CursorLocation = ADODB.CursorLocationEnum.adUseServer
.Open()
End With
' Start a new transaction
Call soConn.BeginTrans()
' Configure the RecordSet object
soRst = New ADODB.Recordset
With soRst
.ActiveConnection = soConn
.CursorLocation = ADODB.CursorLocationEnum.adUseServer
.CursorType = ADODB.CursorTypeEnum.adOpenForwardOnly
.LockType = ADODB.LockTypeEnum.adLockPessimistic
.Open("SELECT * FROM dbo.ControlNumTest")
End With
With soRst
sdData = .Fields!UltData.Value ' Read the last Date (LOCK INFO 1: See comments bello
slValue = .Fields!UltNum.Value ' Read the last Number
If sdData <> Date.Now.Date Then ' Date has changed?
sdData = Date.Now.Date
slValue = 1 ' Restart number
End If
.Fields!UltData.Value = sdData ' Update data
.Fields!UltNum.Value = slValue + 1 ' Next number
End With
Call soRst.Update()
Call soRst.Close()
' Ends the transaction
Call soConn.CommitTrans()
Call soConn.Close()
soRst = Nothing
soConn = Nothing
txtUltNum.Text = slValue + 1 ' Display the last number
Application.DoEvents()
slDelay = Int(((Rnd * 250) + 100) / 100) * 100
System.Threading.Thread.Sleep(slDelay)
Loop While mbCancel = False
If mbCancel = True Then
Call MsgBox("The test was canceled")
End If
Exit Sub
End Sub
Private Sub Button2_Click(sender As Object, e As EventArgs) Handles Button2.Click
mbCancel = True
End Sub
End Class
And created the table
CREATE TABLE [dbo].[ControlNumTest](
[UltData] [datetime] NOT NULL,
[UltNum] [int] NOT NULL,
CONSTRAINT [PK_CorreioNumTeste] PRIMARY KEY CLUSTERED
[UltData] Asc
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = on, FILLFACTOR = 80) ON [PRIMARY]
) ON [PRIMARY]
go insert into ControlNumTest values (cast(getdate()as date),1)
Then ran 3 copies of the program and generated the deadlock:
<deadlock>
<victim-list>
<victimProcess id="processf27b1498" />
</victim-list>
<process-list>
<process id="processf27b1498" taskpriority="0" logused="0" waitresource="KEY: 35:72057594039042048 (a01df6b954ad)" waittime="1970" ownerId="3181" transactionname="implicit_transaction" lasttranstarted="2014-02-14T15:49:31.263" XDES="0xf04da3a8" lockMode="X" schedulerid="4" kpid="9700" status="suspended" spid="51" sbid="0" ecid="0" priority="0" trancount="2" lastbatchstarted="2014-02-14T15:49:31.267" lastbatchcompleted="2014-02-14T15:49:31.267" lastattention="1900-01-01T00:00:00.267" clientapp="vbt" hostname="DBROWNE2" hostpid="21152" loginname="NORTHAMERICA\dbrowne" isolationlevel="read committed (2)" xactid="3181" currentdb="35" lockTimeout="4294967295" clientoption1="671088672" clientoption2="128058">
<executionStack>
<frame procname="adhoc" line="1" stmtstart="80" sqlhandle="0x020000008376181f3ad0ea908fe9d8593f2e3ced9882f5c90000000000000000000000000000000000000000">
UPDATE [dbo].[ControlNumTest] SET [UltData]=@Param000004,[UltNum]=@Param000005 </frame>
<frame procname="unknown" line="1" sqlhandle="0x0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000">
unknown </frame>
</executionStack>
<inputbuf>
(@Param000004 datetime,@Param000005 int)UPDATE [dbo].[ControlNumTest] SET [UltData]=@Param000004,[UltNum]=@Param000005 </inputbuf>
</process>
<process id="processf6ac9498" taskpriority="0" logused="10000" waitresource="KEY: 35:72057594039042048 (a01df6b954ad)" waittime="1971" schedulerid="5" kpid="30516" status="suspended" spid="55" sbid="0" ecid="0" priority="0" trancount="1" lastbatchstarted="2014-02-14T15:49:31.267" lastbatchcompleted="2014-02-14T15:49:31.267" lastattention="1900-01-01T00:00:00.267" clientapp="vbt" hostname="DBROWNE2" hostpid="27852" loginname="NORTHAMERICA\dbrowne" isolationlevel="read committed (2)" xactid="3182" currentdb="35" lockTimeout="4294967295" clientoption1="671156256" clientoption2="128058">
<executionStack>
<frame procname="adhoc" line="1" sqlhandle="0x020000003c6309232ab0edbe0a7790a816a09c4c5ac6f43c0000000000000000000000000000000000000000">
FETCH API_CURSOR0000000000000001 </frame>
<frame procname="unknown" line="1" sqlhandle="0x0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000">
unknown </frame>
</executionStack>
<inputbuf>
FETCH API_CURSOR0000000000000001 </inputbuf>
</process>
</process-list>
<resource-list>
<keylock hobtid="72057594039042048" dbid="35" objectname="vbtest.dbo.ControlNumTest" indexname="PK_CorreioNumTeste" id="lockff6e6c80" mode="U" associatedObjectId="72057594039042048">
<owner-list>
<owner id="processf6ac9498" mode="S" />
<owner id="processf6ac9498" mode="U" requestType="wait" />
</owner-list>
<waiter-list>
<waiter id="processf27b1498" mode="X" requestType="convert" />
</waiter-list>
</keylock>
<keylock hobtid="72057594039042048" dbid="35" objectname="vbtest.dbo.ControlNumTest" indexname="PK_CorreioNumTeste" id="lockff6e6c80" mode="U" associatedObjectId="72057594039042048">
<owner-list>
<owner id="processf27b1498" mode="U" />
<owner id="processf27b1498" mode="U" />
<owner id="processf27b1498" mode="X" requestType="convert" />
</owner-list>
<waiter-list>
<waiter id="processf6ac9498" mode="U" requestType="wait" />
</waiter-list>
</keylock>
</resource-list>
</deadlock>
It's the S lock that comes from the cursor read that's the villian here. U locks are compatible with S locks, so one session gets a U lock and another gets an S lock. But then the session with an S needs a U, and the session with a U needs an
X. Deadlock.
I'm not sure what kind of locks were taken by this cursor code on SQL 2000, but on SQL 2012, this code is absolutely broken and should deadlock.
The right way to fix this code is to add (UPDLOCK,SERIALIZABLE) to the cursor
.Open("SELECT * FROM dbo.ControlNumTest with (updlock,serializable)")
So each session reads the table with a restrictive lock, and you don't mix S, U and X locks in this transaction. This resolves the deadlock, but requires a code change.
I tried several things that didn't require a code, which did not resolve the deadlock;
1) setting ALLOW_ROW_LOCKS=OFF ALLOW_PAGE_LOCKS=OFF
2) SERIALIZABLE isolation level
3) Switching OleDB providers from SQLOLEDB to SQLNCLI11
Then I replaced the table with a view containing a lock hint:
CREATE TABLE [dbo].[ControlNumTest_t](
[UltData] [datetime] NOT NULL,
[UltNum] [int] NOT NULL,
CONSTRAINT [PK_CorreioNumTeste] PRIMARY KEY CLUSTERED
[UltData] Asc
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = on, FILLFACTOR = 80) ON [PRIMARY]
) ON [PRIMARY]
go
create view ControlNumTest as
select * from ControlNumTest_t with (tablockx)
Which, at least in my limited testing, resovlved the deadlock without any client code change.
David
David http://blogs.msdn.com/b/dbrowne/

T440s - i7-4600U CPU - ONLY ONE core operating :((

Hi,
I am an owner of Thinkpad T440s ultrabook, which has Intel i7 4600U CPU installed (exact model is 20AQ006BMC - the one with GeForce 730M graphic card).
Regarding to the documentation on Intel website, this CPU should have 2 cores and 4 threads (Hyperthreading). But when I start CPU-Z utility, it shows me, that I have only one core and two threads available. Same thing displays my process manager in Windows 8.1 - 1 core and 2 logical processors.
Any ideas, what could cause this problem?
Thank you.
Link to image 1
Link to image 2
Moderator note: large image(s) converted to link(s): About Posting Pictures In The Forums
Solved!
Go to Solution.

I have found review of exact same model (as I know, they differ in few other details like 3G modem etc.): http://www.notebookcheck.net/Lenovo-ThinkPad-T440s-20AQ006BGE-Ultrabook-Review-Update.120211.0.html
And there is also screenshot from CPU-Z utility and there it shows correctly 2 cores and 4 threads:
So any idea, what could be an issue? Should I use warranty service? because it looks to me like a broken CPU

Equium A110 - 252 (PSAB2E) - Only one core is working

Have a Equim A110-252 running Vista Home premium. Only one core working. BIOS set to core multi-processing enabled.
Bios version V5.20
Any ideas?
Regards

It appears this model came with XP. Did you install Vista or upgrade to Vista?
Perhaps you need to install or update the Intel Chipset Driver, or install the Value Added Package.

Motion 5 using only one core

Why is motion 5 using only one core during heavy renders, even when all other apps are closed?
Version 5.0.3

coz it uses the GPU to do all the graphics stuff. The cores are only used to process project data.
adam

I was trying to add an itunes library to my computer, and now my itunes library can not be found. An ipod can be synced with only one iTunes library at a time. How can I find my Itunes library, complete with playlists ?

I was trying to add an itunes library to my computer, and now my itunes library can not be found. An ipod can be synced with only one iTunes library at a time. How can I find my Itunes library, complete with playlists ?

I have the same problem too and tried alot of things like time zone , restarting or changing DNS of wifi connection to 8.8.8.8 still nothing happens .. !!
iPhone 5s, iOS 8.3

HT204088 How how can I synch my ipod + iphone music to my new computer? I get the same error "my ipod or iphone is synched with another itunes library.An Ipod can be synched with only one itunes library at a time. What would I like to do Erase and Synch

How can I synch my ipod & iphone music (purchased from itunes on my old laptop) to my new laptop? I keep getting the same message on my itunes on my new laptop: " The ipod/Iphone is synched with another itunes library. An ipod/iphone can be synched with only one itunes library at a time. What would you like to do - Erase and Synch or Transfer Purchases?" What do I do?
A couple of other items:
1) I am guessing Apple does not keep a history of all my music purchases? As I did not have my entire library backed-up anywhere, and relying on the music I have on my ipod and my iphone as my only source of itunes music....I have lost over 500 songs!!!
2) I used to have an Apple account under another account name, and since have switched to a new account name. Is there anyway to find the history of purchases from my old Apple account name and transfer these over to my new account name and onto my new laptop?
I hope someone can help, I am having a very difficult time trying to obtain answers. Angie

The iphone/ipod is NOT a storage/backup device. Not maintaining a backup copy is a big mistake.
You can transfer itunes purchases from your iphone/ipod to your computer:
Authorize your computer for all accounts and then click File>Transfer Purchases

How to connect many devices with only one FW800 port in iMac?

Hi,
I am upgrading to a new Intel iMac from a 2004 vintage Dual2.0GHz PowerMac. I currently have 8x d2 Quadra drives chained by FW800, and 2x Iomega drives connected vis FW400 hub which also connects HD cams.
My questions is that with only one FW800 port in iMac, I think my devices connectivity is the following?
(1) Get a FW 800 hub (I can only find 2 port ones at the Apple store and BestBuy)
(2) Connect the d2 Quadras to one port of the FW800 hub
(3) Get a FW 800 to FW 400 cable
(4) Connect my 6 port FW400 hub to the 2nd port of the FW800 hub
Thanks for reviewing this solution, and I would also appreciate other suggestions or hear about your experiences if you have a similar set-up.
Will

In addition to your listed considerations, you should consider the following.
Many storage needs do not required FireWire 800 speed. For example, USB 2.0 works fine for your Time Machine backup drive. If you are just storing user data such as your iPhoto or iTunes media files, USB 2.0 is more than fast enough. So, as much as possible, if any of those external drives have USB 2.0 connections and the data storage does not need FireWire 800 speed, offload as much as possible to USB 2.0. I used to be a +FireWire snob+, but since getting an Intel iMac, I find that USB 2.0 works quite well for most data storage purposes.
There are new hard drives that are power efficient and as large as 2TB. Consolidate your data storage needs onto a smaller number of very large drives, partitioned as needed. This will make your setup more reliable (smaller number drives), and save reduce power consumption. If any of your current externals are SATA, you can probably replace the existing drive with an extra large one.
So, I think you setup should be, extra large FireWire 800 drive connected to the FireWire 800 port directly. Using a 9-pin to 6-pin cable, connect the FireWire 400 hub. Connect any non-storage FireWire 400 devices there. Do some data transfer testing to make sure having the 400 hub there on the chain does not cause the 800 connection to slow down.
Connect other drives as needed using USB 2.0, existing or new. Retire the smaller of your external drives.

HT4527 an iphone can be synced with only one itunes library at a time error on same pc

an iphone can be synced with only one itunes library at a time error on same pc why?

Damaged library... See Empty/corrupt library after upgrade/crash.
tt2

An iPhone can be synced with only one iTunes library at a time

I recently bought a MacBook Pro, and I figured it would be pretty simple to move my iPhone to sync with iTunes on the Mac from iTunes on my pc, afterall it is the same program and both are designed for the iPhone.
I have been successful in getting the Contacts and Calendar to sync, but the Music, Applications, Video and a few other things give me this message when I check the sync box:
"The iPhone is synced with another iTunes library. Do you want to erase the iPhone and sync with this iTunes library? An iPhone can be synced with only one iTunes library at a time. Erasing and syncing replaces the contents of this iPhone with the contents of this iTunes library."
Obviously, I don't want to erase everything. Actually, I don't care about Music, Videos, Podcasts or Ringtones as I don't have any, but I do care about Photos and Applications. Actually Photos I can reload too, but I don't want to loose the apps I have purchased with the iTunes App Store.
I even tried going back to the PC and unchecking the Sync boxes on it, hoping this might disassociate it from the phone, but now even on that PC I get the same message.
How do I disconnect phone from the old iTunes and be able to sync it to the new iTunes? This should be simple right?

I made an appointment with a Mac Genius and I will say that while it was better than getting to talk to India on a poor quality phone call it was just about as helpful. Sure she was cute and friendly, but I left without my issue resolved and was surprised that I didn't even get a followup from anyone asking about my experience (hence my venting here)
Anyway, I found a solution for my issue here: http://tinyfish.net/2008/07/18/how-to-sync-iphone-with-multiple-computers/
This is a real solution to the issue, and has the benefit that I can do this to as many machines as I need and sync at any of them instead of just one. Hopefully, Apple doesn't delete my response since it truly is the answer to the problem and others might be looking for the same solution.

I got a new pc and I am getting this message: The ipod 'harms ipod' is synced with another itunes library Do you want to erace this Ipod and synce with this itunes library? An Ipod can only be synced with only one itunes library at a time. Erasing and

The ipod 'harms ipod' is synced with another itunes library.Do you want to erase this ipod and sync with this itunes library? An ipod can be synced with only one itunes library at a time. Erasing and syncing replace the contents of this ipod with the contents of this itunes library.
I don't know what to do? I should save my library before I replace the contents, but I don't know how to do that! HELP!!

See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

I bought a MAC for the first time and plugged my Itouch into it to download my music on it, but is says The iPod "Rick's IPOD" is synced with another iTunes library. An iPod can be synced with only one iTunes library at a time. What should I do?

I bought a MAC for the first time and plugged my Itouch into it to download my music on it, but is says The iPod “Rick's IPOD” is synced with another iTunes library. An iPod can be synced with only one iTunes library at a time. What should I do?

Same as you would if you bought a pc; copy everything from your old computer to your new one. Then you can just sync everything from the new computer, as you did with the old one.

AME CC 2014 Rendering with only One Core

Similar Messages

Maybe you are looking for