AME CC can't see files for render

Hi!
When I try to export a short sequence from Adobe Premiere Pro CC I hit queue button and AME CC opened with current sequence prepared for rendering. When I hit green arrow to start render it opens a pop up window and said: "Offline material is present in this export and will be encoded using the Offline Media graphic" ?! What offline material? All media is online. I go back to Adobe Premiere Pro CC and hit export button, and everything was OK. With Adobe Premiere Pro CC everything was renderd as it should be and with AME CC i got rendered Offline Media graphic when I hit continue in a warning pop up window. Everything was the same (settings, files, location for rendered files, all media is loaded correctly...) different is just the rendering software.
Anyone have an idea why is that happening?
Thank you!

Hi Thomas,
My sequence is to long for provide a copy. The total lenght is 1 hour 15 min. and it's a wedding movie. So if yoy don't mind. I think the problem was one of my MOV clips or the combi between MOV and MTS files.
So if my sequence was shorter and no wedding movie it was no problem.
I hope you have something a about the info a give you..
Regards,
Quint

Similar Messages

Vi error on nfs mount; E212: Can't open file for writing

Hi all,
I've setup a umask of 0 for testing on both NFS client (Centos 5.2) and NFS server (OSX 10.5.5 server).
I can create files as one user and edit/save out as another user w/o issue when directly logged into the server via ARD.
However, when I attempt the same from an NFS mount on a client machine, even as root I get the following error using vi;
"file" E212: Can't open file for writing
Looking at the system.log file on the server, I see;
kernel[0]: add_fsevent: no name hard-link! dropping the event. (event 2 vp == 0xa5db510 (-UNKNOWN-FILE)).
This baffles me. My umask is 0 meaning files I create and attempt to edit as other users are 777, but I cannot save out edits unless I do a wq! in vi. At that point, the owner of the file changes to whomever did the vi.
This isn't just a vi issue as it happens using any editor, but I like to use vi.
Any help is greatly appreciated. Hey, beer is on me!

Hi all,
Thanks for the replies
I've narrowed it down to a Centos client issue.
Everything works fine using other Linux based OS's as clients.
Since we have such a huge investment in Centos, I must figure out a workaround. Apple support wasn't much help as usual however they were very nice.
There usual response is "its unsupported".
If Apple really wants to play in the enterprise of business space, they really need to change there philosophy. I mean telling me that I shouldn't mount home directories via NFS is completely rediculus.
What am I supposed to use then, Samba of AFP? No, I don't think so. No offense to Microsoft but why would I use a Windows based file sharing protocol to mount network shares in a Nix env???

Can't see files that are backedup

I have a G4 iMac that has both an internal (small) and external (large) drive that I use for data. I am using a time capsule to backup the whole system.
When I run Time Machine it appears to backup both disks, the log file shows both drives having many GBs of data being transferred without any errors.
However, when I go into the TM application, I can only see files that are on the internal drive. I can only see my external 'LaCie HFS' in the Now view, going back in time that drive is greyed out.
If I use the finder when the TC is mounted, I can traverse into 'Backup.backupdb/iMac/2009-08-074700' and I can see the 'LaCie HFS' folder and in it are all my backed up files.
I have looked through the FAQ and various postings but cannot find an answer.
The closest thing that I can see as being a potential problem is that my old internal drive uses an Apple Partition Map while my new external drive uses a GUID Partition Table.
Why would backupd created backups that Time Machine cannot see?

Hi, and welcome to the forums.
Try this: Open a Finder window and press ShiftCmdC (or select your computer name in the Finder Sidebar).
Then +Enter Time Machine.+
On the first Finder window in the "cascade," labelled Now, you'll see all the volumes currently attached to your Mac.
Select the Finder window for any backup, and you'll see a folder for each drive/volume that was backed-up, including any that are no longer connected. Navigate from there to whatever you're looking for.

Can i see logfile for oracle-xe on RHEL4 ( redhat OS ) ?

Can i see logfile for oracle-xe on RHEL4 ( redhat OS ) ?
Where the logfile store ?
i want to see if i got problem like
:can't connect oracle-xe
:can't access htmldb
:can't run complete
and others.
Thank you very much
pratchaya

Hello:
What logfiles are you refering to?
database logs (i.e.: alert.log... user dumps?)?
Their location can be queried from sqplus:
XE>show parameter dump_dest
NAME                                 TYPE        VALUE
background_dump_dest                 string      /usr/lib/oracle/xe/app/oracle/
                                                 admin/XE/bdump
core_dump_dest                       string      /usr/lib/oracle/xe/app/oracle/
                                                 admin/XE/cdump
user_dump_dest                       string      /usr/lib/oracle/xe/app/oracle/
                                                 admin/XE/udumpListener's log can be queried with 'lsnrctl status' command:
$ lsnrctl status
LSNRCTL for Linux: Version 10.2.0.1.0 - Beta on 12-JAN-2006 09:07:15
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost.localdomain)(PORT=1521)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for Linux: Version 10.2.0.1.0 - Beta
Start Date                12-JAN-2006 08:10:45
Uptime                    0 days 0 hr. 56 min. 30 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      ON
Default Service           XE
Listener Parameter File   /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/listener.ora
Listener Log File         /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
Listening Endpoints Summary...If your client can't connect, you should have a message with reason why (i.e.: TNS-xxxxx) and client side log.
Do you have any specific issue?
Let us know,
Andrea

How can I see file with chinese name in Sunray USB storage?

hi, All
I installed Sunray4u3 on Solaris0805. the application server is win2003EE.
I accessed usb storage from win2003, but I can only see files with English name , and could not see files with chinese name. Why? who can help?
best regards
xiong wei

You might want to make sure your credit card is listed in the billing information associated with your Apple ID (see http://support.apple.com/kb/ht1918).
Also, to change the From name that appears when you address emails on and iOS device, go to Settings>Mail,Contacts,Calendars...tap your iCloud email account, tap you iCloud account at the top, tap Mail at the bottom, then enter the name you want to use in the Name field at the top.
To change the From name on your Mac Mail, go to icloud.com, sign into your account, open Mail, click the gear shaped icon on the bottom left and choose Preferences, go to the Accounts tab and enter the name you want to use in the Full Name field and click Done. Then quit Mail on your Mac and re-open it. Your new From name should now appear in the drop-down list when you compose a new email.

HT1766 Can the backup file for a IPAD be stored and accessed on an external drive?

Can the backup file for a IPAD be stored on an external drive to free up space on a computer?

There are some wireless external hard drives that can be used with the iPad.
The Kingston Wi-Drive, which costs $50 for the 16 Gigabyte, and then $30 more for every 16 gigs more. It works by you turning it on and then accessing the files on it from an app that you download on your iDevice. You can access music, movies, and other stuff. No connections or anything, it works like a WiFi connection, you connect to it from the setting on the iPad under wireless networks.
Then there is the Seagate GoFlex, which some would recommend over the Wi-Drive. But this one costs $199 and had 500 Gigabytes of storage. It works the sameway as the Kingston: no wires, runs over its wireless connection. You can actually fit up to 300 HD movies on it.
Another option:
Expand your iPad's storage capacity with HyperDrive
http://www.macworld.com/article/1153935/hyperdrive.html
On the road with a camera, an iPad, and a Hyperdrive
http://www.macworld.com/article/1160231/ipadhyperdrive.html
Mac - How to Move the iPhone & iPad iTunes Backup folder to an External Hard Drive
http://osxdaily.com/2011/03/05/how-to-move-the-iphoneipad-itunes-backup-folder-t o-an-external-hard-drive/
Windows - Change iPad default backup location
http://apple-ipad-tablet-help.blogspot.com/2010/07/change-ipad-default-backup-lo cation.html
Windows - Changing IPhone and iPad backup location
http://goodstuff2share.wordpress.com/2011/05/22/changing-iphone-and-ipad-backup- location/
 Cheers, Tom

Where can i see Invoices for a Real Estate Contract ?

Hi Guys,
Where can i see Invoices for a Real Estate Contract ? let me also know relevant tables also. All i know is i can see Contact in Tcode RECN.
Thanks
Regards

hi,
Go to SE80, choose the Repository Information System, and search within ABAP Dictionary -> Database Tables for tables belonging to application component RE-FX. which fetches you the relevant tables /.....
Regards,
Santosh

AME Bug: Creates new CFA file for each clip queued!

Here is my workflow: I have a 60 minute sequence of a dance performance of about 20 dances. I queued in AME 20 exports to H.264 files by moving the workspace to the segment I want to export, adding it to the queue with a file name, and repeating for the next section (dance).
For each queued export I make a copy so I have a low and high resolution export (40 in total). Finally, the last queued export is a MPEG DVD file for Encore.
The issue is that when I start the queue, the first thing AME does is conform the ENTIRE SEQUENCE'S AUDIO (not just the clip). Then it starts the export. On my computer (Core i7-2600, 24GB RAM), it takes over 15 minutes to conform a 60 minute sequence (the CFA ends being close to 2GB). While it's conforming the CPU load never goes above 10%. The export starts for the first clip and that takes less than 90 seconds with all 8 cores pegged at 100% and the GPU over 50%.
Then AME startes the conforming AGAIN FOR THE ENTIRE SEQUENCE instead of re-using the CFA file it just conformed!
Why doesn't it re-use the CFA file? Or, why does it conform the entire sequence if all I'm exporting is a portion?
And why isn't conforming a multi-threaded process?
At this rate, it will take all night and consume close to 50 GB of disk space in CFA files.
Here is what my queue looks like:

Actually, I think it's working as designed when it conforms upon export. See the online help HERE.
It says, in part:
Premiere Pro does conform audio in uncompressed clips when you use them in sequences with non-matching sample rates. However no conforming is done until you export the sequences or create audio preview files.
The audio in my Canon MXF file is uncompressed 16-bit Linear PCM, so when I bring in the MXF files all PPr does is create PEK files. This is really nice since I don't have to wait for conforming to begin editing. Creating PEK files is really fast compared to conforming. There is a caviat, though...
The max file size from my camera is about 2GB. Anything longer will span multiple files. If I copy the contents of the CF card from the camera to my computer, the browse to the files using PPr, it will find all the spanned clips and interpret them as one longer video file. Not problem, and that's how it's supposed to work. BUT, since PPr is treating all these spanned files as one longer video clip, it WILL conform the audio.
So to speed things up, I just bring in all the spanned files separately, then sort them and insert them into a sequence in order. It works fine, and no conforming.
My problem with AME is when it DOES finally conform, it's not re-using the CFA file. In my particular case, I'm taking one long sequence and exporting different portions of it as separate exports. I would think that AME would conform the whole sequence once, then re-use it. But no, it sees each as a separate export, so each export gets its own identical (but different named) CFA file.
So now my current workflow is:
Import in all the video as separate MXF files.
Import audio from digital recorder (house audio).
Mark the clapper sync points on the video and audio files.
Add video clips to a sequence in ascending order
Add to the sequence the audio track and align the sync markers
Balance the audio tracks with the mixer
Create a new sequence
Add to the new sequence the first sequence
Render and replace audio so I can get a waveform (it helps find edit points) and conformed audio
Add titles as needed
Edit the timeline, transitions, add Encore chapters, etc.
Export clips to AME queue
Save early and save often!

Can't see file code

I'm using DW 8.0.2 on this computer (30-day trial of full
version CD I
have). On my home computer I have DW MX 6.1. I am trying to
edit existing
website files from a website that I didn't design. It has
".htm" files,
."html" files, and ".asp" files.
At home (with DW MX 6.1), I can access the website files,
download them, see
the html and edit the code, and upload them to the website.
This works for
all file types (htm, html, asp).
On this computer (with DW 8.0.2), I can access the website
files and
download them. But I can't see the html code for some of them
in order to
edit the code. All I see when I open those files is jibberish
symbols.
This is true for all 3 file types -- in other words, some of
the html files
work, some of the asp files work, and some of the htm files
work. By
"work", I mean I can see the code when I open them.
I just reinstalled DW 8.0.2 and HomeSite, and Extension
something, and
ColdFusion hoping somehow that would fix things. What
happened is that now
I can "see" some of the files whereas before I couldn't see
any.
Any ideas what else I could try?
I'm using Windows XP Pro.

Okay, thanks. I'll have to try that.
"Murray *ACE*" <[email protected]> wrote
in message
news:[email protected]...
> DW would do that if you used it to validate the page, I
believe.
>
> --
> Murray --- ICQ 71997575
> Adobe Community Expert
> (If you *MUST* email me, don't LAUGH when you do so!)
> ==================
>
http://www.dreamweavermx-templates.com
- Template Triage!
>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
> ==================
>
>
> "Newbie56" <[email protected]> wrote in message
> news:[email protected]...
>> Thanks again. I appreciate you taking the time to
explain things. I am
>> the type of person that finds it helpful to
understand the concept and
>> underlying reasoning involved in how things work.
That helps me apply
>> the concepts to other situations.
>>
>> I know this is probably overkill or too much to
expect, but I wonder if
>> it would be possible (and practical) for future
versions of DW to build
>> in error messages when certain syntax errors are
encountered instead of
>> just producing a blank page or producing a page with
all unrecognizable
>> gibberish.
>>
>> For example, if DW encountered a problem with an
unrecognized code in the
>> charset=whatever coding, maybe it could produce an
error message that
>> says "error in reading charset command" or
"unrecognized charset" in line
>> "charset=whatever". So, if someone accidentally
entered UTF-61 (a typo)
>> instead of UTF-16, the unrecognized charset error
message could appear.
>>
>> Or, in the common error you described, maybe DW
could produce an error
>> message that says "error -- multiple or conflicting
<body> tags found,
>> unable to proceed".
>>
>> Or, in general, "unknown error(s) in code detected ,
unable to proceed".
>>
>> I'm sure it can't accommodate every coding error,
but maybe some are
>> common enough that DW could provide a feedback
message for them.
>>
>>
>> "Alan" <[email protected]>
wrote in message
>>
news:C0EC64F9.29AFB2%[email protected]...
>>>
>>>
>>>> Thanks. That makes sense and it helps me
understand what the problem
>>>> was.
>>>
>>> no problem and good luck with things.
>>>
>>> suggestion- you could do a Find and Replace, or
just a Find for
>>> charset=unicode sitewide
>>>
>>> a difficult to understand thing that seems like
a contradiction at
>>> first, is
>>> that with each new version of dreamweaver, as
features and capabilities
>>> are
>>> added; it gets less tolerant of code syntax that
isn't just right.
>>> That's
>>> why folks ask to see the page/code. Dw can't be
as tolerant or failure
>>> resistant as a browser can be- a browser just
has to display something.
>>> Dw
>>> has to know exactly what the code is and where
the cursor is in the tree
>>> of
>>> syntax so it can decide what's proper code to
insert in the current
>>> cursor
>>> location.
>>>
>>> it's probably a weekly occurrence of someone who
says design view is
>>> blank
>>> YET the page renders fine in browsers- when the
page is checked they are
>>> using SSI includes where the included files are
complete html docs with
>>> <head> and <body> tags. Browsers
render the page because the browser
>>> programmers can code it to to deal with
imperfect pages- but dreamweaver
>>> sees multiple body tags and gives up trying to
make sense of it.
>>>
>>
>>
>
>

Cifs - need to connect to share server (can see folders but can't see files)

This is driving me nuts...
CASE ONE:
before the upgrade, i could view folders and files on the shareserver (at a company). but after the upgrade, things went downhill...
we can no longer use "smb://ServerName" so we are forced to use "cifs://ServerName". Fine, fine. but i can only see folders...not files.
ive looked everywhere on the internets for a solution but find nerdy, tech lingo. I found only one that had the solution, but they simply said "nevermind, i found the solution...".. jesh,,, at least leave a solution for us....
does someone have a work-around or a solution to this bug?
CASE TWO:
Dealing with Outlook 2011 and sharing caledars using the Exchange, i can see my co-workers email and statuses...but i can no longer see their schedules/availability.
does anyone have a solution to this???
Rule #1: do not say "its an Outlook issue" cause they already told me to ask you.
Rule #2: do not say "you are posting in the wrong place". just help, for Pete's sake...
Rule#3: do not say "$**%()*$ and preliminary connection hub 5583HHFer, BS...." we dont need nerdy lingo...we need help...
others including myself would very much appreciate your help in the above 2 matters.
Kindly,

Hi there,
You may want to take a look at some of the troubleshooting steps found in the article below.
Troubleshooting Home Sharing
http://support.apple.com/kb/ts2972
Hope that helps,
Griff W.

My Mac Can't See Files on External Hard Drive

Hi,
I'm having some trouble with my iMac today. It can't see any files on my NTFS External Hard Drive after a sharing change, I'm using Paragon NTFS for Mac OSX v8.0.0.
Yesterday evening I tried to share the drive over my network by clicking System Preferences / Sharing / File Sharing and then adding the drive as a shared folder. It is since doing this that I cannot see my files on this external HD. I have a second NTFS HD here which I connected and I can see the files on that drive so I don't think it's a software issue.
I have tried a few things to try and fix it but to no avail.
1. I have tried removing it from the shared folder list but that hasn't solved the problem. I tried adding it a second time just in case but that didn't do anything either.
2. I have repaired the disk permissions via disk utility
3. I have tried "defaults write com.apple.finder AppleShowAllFiles TRUE
killall Finder" to show hidden files but they still don't appear. I have reversed this so hidden files are no longer visible.
If I connect the drive to my Windows 7 laptop I can see and access all of the files.
I hope someone can help out with this issue. If you need any other information just let me know.
Kind regards,
Kim
System Details
iMac 24" Early 2008 Model
Core 2 Duo - 3.06Ghz
4GB RAM
OSX 10.7.2
iomega 1TB External Hard Drive
Formatted NTFS
Paragon NTFS for Mac OSX v8.0.0

I had the same problem but only after I upgraded to Lion. I could see the files on my external drive on other Macs using older software. It seems that Lion wasn't seeing old files on the external drive. So we accessed the files on a Mac using Snow Leopard, copied all the files into one new folder on the same external hard drive and now they're there on Lion. Problem solved! I hope this helps

Can't see files in document / downloads folder on dmg disk image

So my last update OSX 10.6.8 crapped out and i couldnt boot the system anymore... So i decided to install a new system, before i did that i backed up my whole HDD with disk utility into a compressed DMG file. I went ahead and installed OSX 10.7 new mounted the DMG file, problem is i can't see any files in my document or in my downloads folder anyone has a solution for this or know what causes this problem. Please let me know.

A warm welcome to the forums Sue!
The Finder is a bit lackadaisical about updating itself, you can click back & forth enough times, closing folders, opening folders and eventually it'll be in touch, or you can try something like "A Better Finder Attributes", for it's "force the Finder to update stale information about your files" feature.
http://www.versiontracker.com/dyn/moreinfo/macosx/18736
Possibly this would help too, but haven't tried it...
http://www.finderpop.com/

Can't see files in folders

I have one user who cannot see any files in folders on Sharepoint. She can see the folders themselves, and any file not in a folder, but gets a 'page cannot be displayed' when she clicks on any folder.
We have granted her full access but still the problem presists. No other users have this problem.
Any thoughts?

Hi Gordi,
If the user tries to click the folder from other computer, can he see the file in the folder?
The Limited Access permission level is designed to be combined with fine-grained permissions to give users access to a specific list, document library, item, or document, without giving them access to the entire site. For example, if you grant user access to an item in a list and they do not have access to the list itself, you will see “limited access”.
As we don’t know the permission configuration on your entire site, I would suggest you remove the user from the whole site collection and re-add her again to see if it will work.
Hope this helps.
Lu Zou
TechNet Subscriber Support in forum
If you have any feedback on our support, please contact [email protected]

Mac OS 10 can't see files on HD coming from OS 9 and vice versa?

Hello, all! Got a TiBook 1Ghz with a 255 GB HD which I've partitioned in half, one for Tiger/OS 9 and one for Leopard. Problem: Any file placed on Vol 2 in OSX is invisible in OS 9 and vice versa, so one writes over the other. Vol 1 works fine. Tried reformatting, disk repair, DiskWarrior 9 and 10, re-installing all the operating systems. Suggestions? Thanks!

Hi, kennethfromtoronto & BGreg! I do know that OS 9 is not supported by Leopard, however I'm not talking about running 9 in Classic. This TiBook will run 9 by itself, but when I run OS 9 it is from Volume 1 which also has Tiger installed. I can boot from Tiger or from OS 9 from Volume 1 and they both run just fine.
The problem is that when do I boot from OS 9, it can't see the files on Volume 2 that were placed there under OS X Tiger. Conversely, when I run Tiger, the files I put on Vol 2 while running OS 9 are not visible. It's like I'm running a parallel universe. Unfortunately, this allows one system to overwrite whatever was put on the volume from the other system, and vice versa, with the net effect that I don't dare run OS 9 for fear of overwriting data on Volume 2.
Also when I do run Leopard from the second volume, it also cannot see any files on Volume 2 that were put there under OS 9.
Note that with Volume 1 there is no visibility problem, no matter which of the three systems is running. It happens with the second volume, whether it has an operating system installed on it or not.
Usually I am good at figuring this stuff out, but you see how confusing this is... My thinking is there might be a bug in the Apple formatting software? I used the Disk Utility from my external hard drive which runs Leopard.
Makes a good puzzle to solve, anyway... Thanks for the help!
DQM

" is missing - FCP can't see file name to reconnect it

I have moved a large amount of files assuming I could easily reconnect using media manager. It now says " is missing and seems unable to see that I have 100s of named files to import. The only solution I have is going through each file one by one and manually locating it.
Anyone know this issue and a fix?!

Yes, do a search in this forum and you will find a few threads about it.
As far as I know there's no solution yet.
Can you give us more detail about your setup (version FCP etc) and the kind of Files you are using? (XDCam, DV, Prores, etc)
Maybe we can find a common denominator which causes this problem.
It also might be helpfull if you exactly did with those files.
for exemple: Was FCP running while you moved them?
Was the disk disconnected while you opened this project? etc
Please be accurate.
Also send your problem as detailed as possible to apple feedback. Follow this link: [FCP Feedback Page|http://www.apple.com/feedback/finalcutpro.html]
For now: Keep on reconnecting...manually. Sorry
Rienk
Message was edited by: Rienk (repaired the link)

AME CC can't see files for render

Similar Messages

Maybe you are looking for