AME CS6 Fails while while loading

My PC crashed (blue screen) while encoder was exporting a vid.
After restarting pc, encoder now fails to load at the splash screen. When it's loading the plugins etc it freezes when it gets to thelastproject I worked on.
What I've tried:
Deleting the "Watch Folder Info" file in "C:\Users\AppData\Roaming\Adobe\Adobe Media Encoder\6.0"
Deleting the whole 6.0 folder in "C:\Users\AppData\Roaming\Adobe\Adobe Media Encoder\6.0"
Deleting all temp files relating to the project in "C:\Users\AppData\Local\Temp"
System:
Win 7 Ultimate x64
16GB Ram
nVidia 560 Ti
Intel i7 2600 CPU

Great report and an admirable effort at troubleshooting the issue.
Try deleting (or renaming*) three more folders from C:\Users\AppData\Roaming\Adobe\:
\Common : this contains an AME folder as well as the media cache, which could have a corrupt file from the BSOD
\dynamiclinkmanager\6.0 : This is an executable that AME uses to read sequences from PPRO and comps from AE.
\PProHeadless\6.0 : This is basically a version of PPRO that DynamicLink uses to render frames from a sequence that AME is encoding.
*I recommend renaming these folders, which effectively hides them from AME, rather than deleting them. That way, you don't lose anything in case the step doesn't help--just delete the new folder and rename the old one to its orginal name.

Similar Messages

Data load failed while loading data from one DSO to another DSO..

Hi,
On SID generation data load failed while loading data from Source DSO to Target DSO.
Following are the error which is occuuring--
Value "External Ref # 2421-0625511EXP " (HEX 450078007400650072006E0061006C0020005200650066
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0BBP
So, i'm not getting WHY in one DSO i.e Source it got successful but in another DSO i.e. Target its got failed??
While analyzing all i check that SIDs Generation upon Activation is ckecked in source DSO but not in Target DSO..so it is reason its got failed??
Please explain..
Thanks,
Sneha

Hi,
I hope your data flow has been designed in such a way where the 1st DSO as a staging Device and all transformation rules and routine are maintained in between 1st to 2nd dso and sid generation upon activation maintained in 2nd DSO. By doing so you will be getting your data 1st DSO same as your source system data since you are not doing any transformation rules and routine etc.. which helps to avoid data load failure.
Please analyze the following
Have you loaded masterdata before transaction data ... if no please do it first
go to the property of first dso and check whether there maintained sid generation up on activation (it may not be maintained I guess)
Goto the property of 2nd Dso and check whether there maintained sid generation up on activation (It may be maintained I hope)
this may be the reason.
Also check whether there is any special char involvement in your transaction data (even lower case letter)
Regards
BVR

InfoPackage fails while loading to 0PM_C05

Hi,
While loading the InfoPackage under datasource 0PM_PRM_PLCS_1, it fails to retrieve data with the below message:
"_Extraction of Cube 0PM_C05 requires customizing of table T_PMC05_"
The data flows from Datasource to DSO 0PM_DS07 and then to InfoCube 0PM_C05. But the data load is failing at initial level only.
Has anybody encountered this error and managed to resolve this ? Please reply and <removed_by_moderator>
Regards,
Amogh
Edited by: Amogh on Oct 28, 2010 9:56 AM
Edited by: Pravender on Nov 1, 2010 12:16 PM

Hi Amogh,
I guess your data flow is like 0PM_PRM_PLCS_1(DS) --> 0PM_DS07(DSO) --> 0PM_C05(Cube)
1)First check the Data flow.
2)Goto RAS3(Extraction checker) in R/3 system and check whther you are able to see the records
3)If you are able to see the records in RSA3, then Check the Datasource , replicate it again and then activate it.
4)Now execute the Info package and check.
5)If you are not able to see the records in RSA3/ if you are gettign any short dumps while executing, then try to debug it.

ORA-22288:file or LOB operation FILEOPEN failed while loading XML file.

Hello all,
I am getting the following error messages while loading XML file to Oracle 9i table.
declare
ERROR at line 1:
ORA-22288: file or LOB operation FILEOPEN failed
No such file or directory
ORA-06512: at "SYS.DBMS_LOB", line 504
ORA-06512: at line 10
The script I am using is all follows:-
1. Created a file ldxmldata.sh on unix server directory
dd conv=ucase if=$1|sed 's/<?XML/<?xml/'|sed 's/VERSION/version/'|sed 's
/RECORD/ROW/'|sed 's/DATE/TRANSDATE/'|sed 's/&/-/'|sed 's/\/DATE>// TRANSDATE>/'>$1.UCASE
sqlplus sales/sales@rac @upld.sql $1.UCASE
2. Created SQL file upld.sql on unix server
set serveroutput on
exec DBMS_JAVA.SET_OUTPUT(1000000);
@ldxml.sql bsl.xml.UCASE
commit;
exit
3. Created sql file ldxml.sql on unix server
declare
insCtx DBMS_XMLSave.ctxType;
rows number;
file bfile := bfilename('XML_DIR','&1');
charContent CLOB := ' ';
targetFile bfile;
warning number;
begin
targetFile := file;
DBMS_LOB.fileopen(targetFile, DBMS_LOB.file_readonly);
DBMS_LOB.loadfromFile(charContent,targetFile,DBMS_LOB.getLength(tar
getFile),1,1);
insCtx := DBMS_XMLSave.newContext('sales.s_price');
rows := DBMS_XMLSave.insertXML(insCtx,charContent);
DBMS_XMLSave.closeContext(insCtx);
DBMS_LOB.fileclose(targetFile);
end;
4. As Sys,
Created a directory XML_DIR and assigned it the path of Unix server directory
where the script files reside.
Granted read priviledge on XML_DIR to user sales.
I am getting the above error messages. Kindly help with some possible solution.
Arun Patodia
Bokaro Steel City

Hi guys,
Sybrand, aplogoies, the second line of the error stack was on one line in the first post, full error stack below:
ORA-22288: file or LOB operation FILEOPEN failed
The program issued a command but the command length is incorrect.
ORA-06512: at "SYS.DBMS_LOB", line 716
ORA-06512: at "JLMS.LOAD_DATA_UTIL", line 417
ORA-06512: at line 2I have looked at that error code as you mentioned, but the second line here doesn't really help much.
Hoek, i took your advice and tried to replace FILEOPEN with OPEn but got the same error.
Just to clarify as well, I am not using UNC or relative file paths as I know that these can cause problems.
Rgds
Dan

Flash CS6 crashes while loading

Hi everyone,
I have problem with loading fresh installed Flash CS6.
Yesterday I reinstalled system (win7, 64bit), and start downloading and installing Adobe programs. Everything worked fine, Flash started, I made few banners, and gone to sleep.
Today, when I started computer, I got notification that there are some updates, also for Flash.
After installing that I can't start Flash. I'm clicking on icon, I see welcome screen, and while 'Initializing fonts' everything just dissapear. No error, no alert, nothing.
Any idea?
Thanks,
Pawel

Hello,
The logs can be found at:
Win: Program Files\Common files\Adobe\Installers or \Documents and Settings\<user>\Local Settings\ApplicationData\Adobe\AAMUpdater\1.0\
Mac: /Library/Logs/Adobe/Installers or ~/ Library/ApplicationSupport/Adobe/AAMUpdater/1.0/
Regards,
Suhas Yogin

Weblogic Start script fails while Loading trusted certificates from jks

Hi,
I have a Weblogic Portal 10.3.2 installation on a Solaris Unix box. There is one Admin server and two Managed servers. I am trying to deploy an EJB based application on one of the Managed servers. Note that this application has been working fine in the Weblogic 9.2 environment.
When the Managed Server is started, I get the below messages in the Weblogic console log. We have an internal SSO authentication system, which is integrated with this application. When this integration is removed, we are able to login to the application without any issues. When it is turned on, the redirection from SSO to the application fails - most likely because of the below SSL related errors.
I have accessed the below link and accordingly set the property -Dweblogic.ssl.JSSEEnabled=true. But it didn't help.
http://justasg.blogspot.com/2012/04/tlsssl-certificate-errors-and-warnings.html
Please let me know if you have any suggestions.
<Jun 4, 2012 4:51:59 PM MEST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file /data/applications/norkom/BEA103/wlserver_10.3/server/lib/DemoTrust.jks.>
<Jun 4, 2012 4:51:59 PM MEST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file /opt/jdk1.6.0_32/jre/lib/security/cacerts.>
<Jun 4, 2012 4:51:59 PM MEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=Entrust Root Certification Authority - G2,OU=(c) 2009 Entrust\, Inc. - for authorized use only,OU=See www.entrust.net/legal-terms,O=Entrust\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Jun 4, 2012 4:51:59 PM MEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Jun 4, 2012 4:51:59 PM MEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Jun 4, 2012 4:51:59 PM MEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Jun 4, 2012 4:51:59 PM MEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Jun 4, 2012 4:51:59 PM MEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Jun 4, 2012 4:51:59 PM MEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Jun 4, 2012 4:51:59 PM MEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Jun 4, 2012 4:51:59 PM MEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Jun 4, 2012 4:51:59 PM MEST> <Error> <Server> <BEA-002606> <Unable to create a server socket for listening on channel "DefaultSecure[1]". The address 127.0.0.1 might be incorrect or another process is using port 7022: java.net.BindException: Address already in use.>
<Jun 4, 2012 4:51:59 PM MEST> <Error> <Server> <BEA-002606> <Unable to create a server socket for listening on channel "DefaultSecure". The address 10.228.12.24 might be incorrect or another process is using port 7022: java.net.BindException: Address already in use.>
<Jun 4, 2012 4:51:59 PM MEST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.228.12.24:7020 for protocols iiop, t3, ldap, snmp, http.>
<Jun 4, 2012 4:51:59 PM MEST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 127.0.0.1:7020 for protocols iiop, t3, ldap, snmp, http.>
<Jun 4, 2012 4:51:59 PM MEST> <Notice> <WebLogicServer> <BEA-000332> <Started WebLogic Managed Server "NCA_Server" for domain "norkom" running in Development Mode>
<Jun 4, 2012 4:52:01 PM MEST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Jun 4, 2012 4:52:01 PM MEST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
<WSEE:27>Warning: JMS queue 'weblogic.wsee.DefaultQueue' is not found, as a result, Web Service async responses via jms transport is not supported. If the target service uses JMS transport, the responses will not be able to come back.<JmsQueueListener.connect:287>
<WSEE:27>Warning: JMS queue 'weblogic.wsee.DefaultQueue' is not found, as a result, Web Service async responses via jms transport is not supported. If the target service uses JMS transport, the responses will not be able to come back.<JmsQueueListener.connect:287>
<WSEE:27>Warning: JMS queue 'weblogic.wsee.DefaultQueue' is not found, as a result, Web Service async responses via jms transport is not supported. If the target service uses JMS transport, the responses will not be able to come back.<JmsQueueListener.connect:287>
<WSEE:27>Warning: JMS queue 'weblogic.wsee.DefaultQueue' is not found, as a result, Web Service async responses via jms transport is not supported. If the target service uses JMS transport, the responses will not be able to come back.<JmsQueueListener.connect:287>
<WSEE:27>Warning: JMS queue 'weblogic.wsee.DefaultQueue' is not found, as a result, Web Service async responses via jms transport is not supported. If the target service uses JMS transport, the responses will not be able to come back.<JmsQueueListener.connect:287>
<WSEE:27>Warning: JMS queue 'weblogic.wsee.DefaultQueue' is not found, as a result, Web Service async responses via jms transport is not supported. If the target service uses JMS transport, the responses will not be able to come back.<JmsQueueListener.connect:287>
Note: We have another Solaris Unix box, with the same installation of Weblogic with the same SSO redirection, but another EJB application is deployed. Also, there is no Managed and the application is deployed on the Admin server itself. But when the server is started, I don't see any attempts to load any certificates and also there are no issues.
So either please suggest how this certificate loading can be rectified or suggest a way to disable the certificate loading (if at all its an option).
Please let me know if you need any further details.

Firstly,
938767 wrote:
<Jun 4, 2012 4:51:59 PM MEST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file /opt/jdk1.6.0_32/jre/lib/security/cacerts.>
<Jun 4, 2012 4:51:59 PM MEST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=Entrust Root Certification Authority - G2,OU=(c) 2009 Entrust\, Inc. - for authorized use only,OU=See www.entrust.net/legal-terms,O=Entrust\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>I don't think that this will be your problem... Unless you are actually using some of those certificates you can ignore those messages.
But the following looks suspicious, I guess 7022 is your SSL port...
<Jun 4, 2012 4:51:59 PM MEST> <Error> <Server> <BEA-002606> <Unable to create a server socket for listening on channel "DefaultSecure[1]". The address 127.0.0.1 might be incorrect or another process is using port 7022: java.net.BindException: Address already in use.>
<Jun 4, 2012 4:51:59 PM MEST> <Error> <Server> <BEA-002606> <Unable to create a server socket for listening on channel "DefaultSecure". The address 10.228.12.24 might be incorrect or another process is using port 7022: java.net.BindException: Address already in use.>Hope that helps.
Cheers,
Vlad
Give points - it is good etiquette to reward an answerer points (5 - helpful; 10 - correct) for their post if they answer your question. If you think this answer is helpful, please consider giving points.

[SOLVED] Arch Linux Boot from USB fails while loading kernel

I am attempting to get arch linux booting off my usb. I use cfdisk to create a /dev/sdb1 partition then use mkfs.ext4 /dev/sdb1, mount the usb, pacstrap it, use install-syslinux_update -iam, generate fstab and then attempt to boot from it.
The boot extracts the kernel but then complains that DEVICE is missing in the option APPEND root=DEVICE (in syslinux.cfg). I looked in /dev/disk (on the temporary filesystem shell), it showed my ssd and cd drive but not the usb. Does anyone know what could be causing the USB to not load in that particular section of the kernel?
Last edited by afree10 (2013-12-11 14:28:14)

afree10 wrote:
Due to my situation I have to type the file in from scratch so I will only type uncommented lines:
MODULES=""
BINARIES=""
FILES=""
HOOKS="base udev autodetect modconf block filesystems keyboard fsck"
I will reboot and get that lsmod output.
Since you'll probably want to boot from different computers (portable USB system), you want to remove 'autodetect' from that line. This is the same as always booting the initramfs-linux-fallback.img image. To save some space, you could remove 'autodetect' from the configuration file, disable the fallback image in /etc/mkinitcpio.d/linux.preset and delete initramfs-linux.img (otherwise, you'll get two identical images).
Of course, run mkinitcpio -P when you're done.

AME CS6 painfully slow loading large quantities of clips.

I'm using AME CS6 to transcode clips to prepare clips for delivery to a client that will only accept OP1a MXF's. I have hundreds of clips to transcode and AME CS6 is unbearably slow loading them. Usually I set up a watch folder but in this case I have two batches to run, one with about 750 individual clips and one with about 450. Using watch folders just completely brought AME to it's knees trying to transcode a file while updating the queue. I've just spent two hours loading the clips into AME by dragging/dropping them into the queue (that time includes time spent waiting while AME hangs while trying to change the codec/output setting).
Earlier versions of AME were no where near as slow as this. Even just scrolling up/down the queue that used to be fluid is now a click, wait, update..click, wait update process. I could have copied the files from drive to drive in less time than this took to load/index. Is there anything that can be done to speed up this process?
FYI
Supermicro workstation
Win7/64
Dual Xeon X5650
48Gb RAM
nVidia Quadro 4000
2x nVidia GTX 580
Red Rocket
SSD (OS)
RAID-0 (media-internal)
RAID-0 (render-external)

lasvideo, thanks but that's not the same problem I am having. Appreciate you chiming in though!
Stephen, thanks for writing. It's a pretty massive project and because clips often criss-cross between segments I have been working everything inside the same edit. I also wanted to see just how hard I could push Premiere (I've been using Premiere for 7 years now). Mind you once everything loads it still does just fine. Edits like a champ. Just was a bit frustrating with the load time.
On #1, I don't have time machine set-up anymore as I ate up all my space.
On #2 this is an interesting suggestion. I'm letting project manager analyze my project right now. I've never used project manager to break off individual edits so this should be interesting. Yes, just me on one machine. I'm shooting and editing at the same time and also doing graphics so I reckon by December. I have two full backups of all footage and edit files and save to a new edit file every couple of days (plus I have auto-save rolling).
And for whatever reason, today when I opened a different project and then went back to the large project, suddenly the problem dissappeared. Weird but there it is. All 20,000 clips now load again under 4 minutes.
Thanks for the assistance.
Best, Dare

Failure while loading into cube

I am doing loading into Headcount cube on daily basis through a process chain from two different datasources.
The system is 3.5
But it fails while loading and it ends up with dump in ST22 with the exception ADD_PARTITION_FAILED.
Can anybody help regarding what needs to be done to overcome this issue?
Thanks.

Hi,
This thread solves ur problem
error while loading data into cube
Tarak

Load fails while running a Process Chain even before loading to the PSA.

Hi Experts,
We are working on BI 7.0 and ECC 6.0 on an IS-U Project.
We are loading Transaction Data using Process Chains. Data load is failing even before loading to the PSA and the error message is as below:
Error message during processing in BI
Diagnosis
An error occurred in BI while processing the data. The error is documented in an error message.
System Response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Inbound Processing
Procedure
Check the error message (pushbutton below the text).
Select the message in the message dialog box, and look at the long text for further information.
Follow the instructions in the message.
Had anyone come across this type of error, if so, what could be the reason of failure and probable solution.
Your time is very much appreciated.
Thanks in Advance.
Best Regards,
Chandu.

Hi,
It might be a network connection between the source system and BW? Can you get your Basis colleague to look into the connection?
Hope this helps.
Cheers,
Gimmo

While loading ITunes Igot this messege, Service "Apple Mobile Device" failed to start. Verify that you have sufficient privileges to start system services. My question is, How do I verify if I have sufficient privileges?

While loading ITunes I got this messege, Service "Apple Mobile Device" failed to start. Verify that you have sufficient privileges to start system services. My question is, How do I verify if I have sufficient privileges?

Hello hurleygirl63,
Thank you for the details of the issue you are experiencing with iTunes. I recommend following the steps in the article below:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
Thank you for using Apple Support Communities.
Best,
Sheila M.

Install RAC failed with root.sh error while loading shared libraries: libst

Hi ,
I install rac under vmware workstation using this atricle .
http://www.oracle-base.com/articles/10g/OracleDB10gR2RACInstallationOnCentos4UsingVMware.php
everything work smoothly but I faced error with root.sh
Failed to upgrade Oracle Cluster Registry configuration
I found metlalink talk about missing compat-libstdc++-33-3.2.3-47.3.ia64.rpm and must be installed according to
that .
The probelm rasied when run
/u01/app/oracle/product/10.2.0/crs/bin/crsctl.bin: error while loading shared libraries: libstdc++.so.5: cannot
open shared object file: No such file or directory
Failure initializing entries in /etc/oracle/scls_scr/rac2.
Linux version is RHE4
[oracle@rac1 bin]$ uname -a
Linux rac1.localdomain 2.6.9-55.ELsmp #1 SMP Fri Apr 20 17:03:35 EDT 2007 i686 i686 i386 GNU/Linux
when install this package it does not work
[root@rac1 RPMS]# rpm -Uvh compat-libstdc++-33-3.2.3-47.3.ia64.rpm
warning: compat-libstdc++-33-3.2.3-47.3.ia64.rpm: V3 DSA signature: NOKEY, key ID b38a8516error: Failed
dependencies:
libc.so.6.1()(64bit) is needed by compat-libstdc++-33-3.2.3-47.3.ia64 libc.so.6.1(GLIBC_2.2)(64bit)
is needed by compat-libstdc++-33-3.2.3-47.3.ia64 libc.so.6.1(GLIBC_2.3)(64bit) is needed by compat-
libstdc++-33-3.2.3-47.3.ia64 libgcc_s.so.1()(64bit) is needed by compat-libstdc++-33-3.2.3-47.3.ia64
libgcc_s.so.1(GCC_3.0)(64bit) is needed by compat-libstdc++-33-3.2.3-47.3.ia64 libgcc_s.so.1(GCC_3.3)(64bit)
is needed by compat-libstdc++-33-3.2.3-47.3.ia64 libgcc_s.so.1(GLIBC_2.0)(64bit) is needed by compat-
libstdc++-33-3.2.3-47.3.ia64 libm.so.6.1()(64bit) is needed by compat-libstdc++-33-3.2.3-47.3.ia64
compat-libstdc++ = 7.3-2.96.128 is needed by (installed) compat-libstdc++-devel-7.3-2.96.128.i386 compat-
libstdc++ = 7.3 is needed by (installed) compat-gcc-c++-7.3-2.96.128.i386[root@rac1 RPMS]#
My probelm cannot install this packages ? What shoudl I do .

user12010537 wrote:
Hi ,
I found metlalink talk about missing compat-libstdc++-33-3.2.3-47.3.ia64.rpm and must be installed according to
Linux version is RHE4
[root@rac1 RPMS]# rpm -Uvh compat-libstdc++-33-3.2.3-47.3.ia64.rpm
warning: compat-libstdc++-33-3.2.3-47.3.ia64.rpm: V3 DSA signature: NOKEY, key ID b38a8516error: Failed
dependencies:
libc.so.6.1()(64bit) is needed by compat-libstdc++-33-3.2.3-47.3.ia64
My probelm cannot install this packages ? What shoudl I do .
Hi,
You need to install the dependency package first like glibc, etc
also see the output from runcluvfy, it should show which packages need to installed
Cheers

While loading master data to infoobject Load failed due to Duplicate record

Hi Experts,
While loading master data to the infoobject load failed .
The error it is showing is 24 Duplicate record found. 23 recordings used in table.
Pls help me to solve this issue
Thanks in Advance.
Regards,
Gopal.

In infopackage settings u will find a checkbox for 'delete duplicate records'.
I think it appears beside the radio button for 'To PSA',and also tick checkbox for 'subsequent update to data targets'.
This will remove the duplicate records(if any) from the PSA before they are processed further by transfer and update rules.
Use this and reload master data.
cheers,
Vishvesh

Flash Pro CS6 fails to load

Flash Pro CS6 loads and suddenly disappear while "loading fonts". I found similar discussions, and their solution suggests to find fontinfo.txt and edit it, but i fail to find the fontinfo.txt but found a missfont.map.
Help needed, thanks in advance..

Hi,
The fontinfo.txt file can be found at:
C:\Users\«YourUserName»\AppData\Local\Adobe\Flash CS6\en_US\Configuration
Firstly, let me know if you are able find the fontinfo.txt file at the said location. Secondly, if you manage find it, empty the .txt file, save as Read Only (you need to ENABLE this option, not Disable as in your post), and then try restarting Flash.
Please see if it works for you. These are steps as described in the forum discussion Ned referred, and I would request you try these to see if the issue still persists.
Regards,
Suhas Yogin

Error while Loading Budgets Using AMG

Error while Loading Budgets Using AMG
Dear All,
I am trying to load Budgets into ORACLE Projects using AMG API's..
I have developed PL/SQL which uses below procedures of pa_budget_pub package.
init_budget;
load_budget_line;
execute_draft_budget;
baseline_budget;
Procedure execute_create_draft_budget fails with following error message.
error message: Please enter a valid product code for this project.
error message: You entered an invalid API parameter.Please enter valid parameter and try again. Parameter Name: Resource List Parameter Value: 1446
error message: Project: AC044. Please specify a valid resource list.
error message: Project: AC044. Please specify a valid resource list.
Could somebody explain me how to resolve this error message and load the budget lines.
Thanks in Advance.
Afsal Basha.

What I'm saying is, verify the column name. Dont post if not possible.
Example follows, with one table intentionally "hidden".
SQL> create table "tEsT" ("MaxNumber" float, "MaxnumbeR" number);
SQL> select table_name,column_name from user_tab_columns where table_name like 't%';
TABLE_NAME                     COLUMN_NAME
tEsT                           MaxNumber
tEsT                           MaxnumbeR
teST                           iD
teST                           MaxNumberHth,
Fredrik

AME CS6 Fails while while loading

Similar Messages

Maybe you are looking for