AME CS6 will not import Avid QT Ref files

It says they're corrupt. CS5.5 worked fine. We just updated to CS6 (finally) because Adobe Encore wouldn't work with our new HP Z820 systems. Fixed one problem, now we have another. No matter what I do, Quicktime Reference files out of Avid Version 6.5.2 on Z820 will not import or encode a reference file. This is our workflow. Takes way too long to create self-contained QT files. All applications are updated to current version.

No, no luck. There is no black in my sequence, and if there was - I tell Avid to fill blank space with black. This was never an issue before, still saying files are corrupt. I took all updates, no help. I don't think they're addressing this. I remember in CS5, I had to beg them to get the audio to work in AME with QT reference files from Avid. They finally fixed it, maybe someone can address this? I saw another post a while back on this forum for the same issue.

Similar Messages

After effects cs6 will not import swf files...

after effects cs6 will not import swf files...keeps saying it's unsupported. why would this be? what do i need to change?

What SWF file? What source? How was it generated? SWF generated by Flex/ Flash Server may contain constructs that are incompatible and SWFs that render all their elements dynamically using Flash drawing primitives and use lots of ActionScript may also not work...
Mylenium

HT201408 My iPad version 6.1.3 will not import Nikon RAW (.NEF) files. Can anyone tell me why I just get red exclamation points and no imports? Discussion areas indicate that RAW files can be imported.

I am unable to import RAW Nikon (.NEF) files into my iPad version 6.1.3. Can anyone explain to me how to import RAW files? I continually get a red exclamation point with RAW files while jpegs have no problem. Other discussions indicate that RAW files can be imported. Many thanks for yur help.

D40X support should be available in ACR 4.1. Availability should be by the end of the week, according to dpreview. See
http://www.dpreview.com/news/0705/07052901adobecameraraw41.asp
John

CS6 will not import PSD, JPEG or TILL (all created in Photoshop)

When I try to import the files I get 'The importer reported a generic error'.
I have the latest CS6 version of Premiere Pro and Photoshop.
I have rebooted the computer.
Just about to reinstall PP but would rather now.
Ben

Picture must be RGB not CMYK (CYMK?) http://forums.adobe.com/thread/1081681

LR3 will not import any type of file from my HD

LRv3.6. OS10.7.4. 9GB RAM. 700GB freespace.
I'm used to easily importing RAW, Tiff and jpeg into LR3. For a reason unknown to me, LR3 now rejects all import requests.
Recent RAW files are shot on 5d mk3 into Capture One Pro 6.4.3-64bit. I thought it would be the camera so I tried to import historic files from jobs that I had already proccessed in LR3 but still no luck.
Tried importing regular tiffs, no joy either.
Do any of you good people have any ideas?

What error message are you getting?
If LR says the files could not be read, the problem is probably that you don't have write permission for where you're copying the files to when you try to import. Yes, I know that the error message is backwards.
Try importing with Add, so the files aren't moved or copied.
If that isn't your problem, come back with a description of what is happening.
Hal

LR suddenly will not import my Nikon D600 files.

I was import some file off my Nikon D600, then I changed destination subfolder and sudden LR4.4 won't import my D600 NEF raw files. The more I use this product the more dis-enchanted I become with it.

Do you try to import directly from the camera or do you use a cardreader?
What OS are you using, can you make a screenshot of your Import screen?
I do use Lightroom since it's very first beta version and I'm getting everyday happier with it, especially with my new D600

Dreamweaver CS6 will not recognize existing site definition files

Neither does CC, naturally. These are sites I haven't edited for about a year. I can't find any information about reloading sites by importing the contents, only by opening the STE files... which in this case, won't open.

Are you attempting to simply open the .ste, or are you going to Site > Manage Sites > Import?
If you are tring to import them correctly (second option above) and they aren't importing, the .ste files may be corrupt. To create new site definitions from your existing content...
1. Go to Site > New Site
2. For the "Local Site Folder" browse to one of your current site folders on your HD
3. Add a server and FTP credentials obtained from your hosting company (if you don't have them)
4. Save
5. Repeat for each site
EDIT: If you don't have the site's files locally, do the same as above (setting the local site folder to an empty folder on your HD) and, once you add the FTP info, click the Get button (down arrow) in the Files window to download your entire site onto your machine.

Lightroom 4.4 still will not import Fuji X100S .raf files

I'm on OSX latest version...

According to here: http://www.adobe.com/uk/products/photoshop/extend.html your camera is supported.

HT3290 Video will not import after updating my iMovie from '09 to '11

I updated my imovie '09 to '11 and now my video files from my camcorder JVC (model GZ_MG330HU) will not import. The video files show up in my iMovie library but when I try to create a project or movie and then share what I have created the files are listed as still on my camera and it says that I need to reimport. It says to go the File Menu and click "Reimport from camera archive" but there is no such option.
I used to import my files with my old iMovie version and create mini home videos but now even those video files are not listed. I would like to reload the old version. How can I do that? Will iMovie '11 get fixed?
Help!

If there are problems with importing the IE Favorites in Firefox then export the favorites in IE to an HTML file and import that file in the Firefox Bookmarks Manager.
If you do not have the menu bar in IE then right-click the toolbar at the top to enable the Menu Bar.
*Export the favorites in IE to an HTML file (bookmarks.html):<br>File > Import and Export
*Import the HTML file in Firefox:<br>Bookmarks > Show All Bookmarks > Import & Backup > Import Bookmarks from HTML
See "Import from another browser" and "Import from file":
*http://kb.mozillazine.org/Import_bookmarks

Adobe LR3 will not import image files. Running on Mac OS 10.6.4

When I try to import images into LR3 I get the errors show on attached screenshots. Anyone know how to fix this?

I'm having the same problem and I'm running LR3 on Mac OS 10.6.4 as well.
I put my SD card into my iMac's SD card slot, and tried to import into LR3, but got an error that all of my new files were not imported because they "...could not be read (17)". They can be read just fine by GraphicConverter. I shoot RAW+JPG and LR3 will not import either version (e.g., if I remove the .CR2 files from the SD card, LR3 won't read the .jpgs either). I also put the SD card into a reader (instead of into the iMac's SD card slot) and that didn't work.
I copied the RAWs to the Desktop and tried to import from there, but in that case I get a message that the import operations were not performed because "a file could not be copied to the requested location (34)".
I imported images from this SD card on the 5th, and I haven't formatted it since then. The only thing that's changed that I know of is the Mac OS update, but I would expect that if that were the problem, I wouldn't be able to read these files anywhere (i.e., GraphicConverter).
Any suggestions?
Update: I've now tried another SD card, and a CF card, and LR3 will not import any of the files on them - I get the same "...could not be read (17)" error. I have repaired disk permissions, and I've trashed the Lightroom 3 preferences.
Update #2: I've deleted and re-installed Lightroom 3, and I still cannot import any new images. Lightroom 2 imports just fine. This is becoming infuriating.
Anyone have any suggestions yet?

Lightroom 3 will not import any images

[I replied to another thread, but it doesn't seem to be coming up at the top of the post list when I update my information, so I'm reposting in the hopes that someone will notice and offer some helpful advice, as this is rapidly becoming infuriating.]
I'm running LR3 on Mac OS 10.6.4.
I put my SD card into my iMac's SD card slot, and tried to import into LR3, but got an error that all of my new files were not imported because they "...could not be read (17)". They can be read just fine by GraphicConverter and Lightroom 2. I shoot RAW+JPG and LR3 will not import either version (e.g., if I remove the .CR2 files from the SD card, LR3 won't read the .jpgs either). I also put the SD card into a reader (instead of into the iMac's SD card slot) and that didn't work.
I copied the RAWs to the Desktop and tried to import from there, but in that case I get a message that the import operations were not performed because "a file could not be copied to the requested location (34)".
I imported images from this SD card on the 5th, and I haven't formatted it since then. The only thing that's changed that I know of is the Mac OS update, but I would expect that if that were the problem, I wouldn't be able to read these files anywhere (i.e., GraphicConverter).
Update: I've now tried another SD card, and a CF card, and LR3 will not import any of the files on them - I get the same "...could not be read (17)" error. I have repaired disk permissions, and I've trashed the Lightroom 3 preferences.
Update #2: I've deleted and re-installed Lightroom 3, and I still cannot import any new images. Lightroom 2 continues to import just fine.
Anyone have any suggestions?

OK, I _think_ I have the cause & cure.
Cause:
Canon says the software [firmware?] bundled with the Canon Rebel XT "is not fully compatible with the latest version of OSX." I can continue to automatically bring up iPhoto or use ImageCapture, in any case. Thanks, but I want LR3. Canon recommended that I set the controls in ImageCapture to specify opening LR3 when a camera is detected. I did, but it was doing this before, so I saw no difference. Also, I'm not sure it was doing it reliably, before or after this change.
This software incompatibility might explain why the Canon Rebel XT was not loading into LR3, but would not explain why it was not recognized by the Finder to add to the Devices list. The Canon wouldn't get added to the Devices list in OSX 10.4.11, either.
ImageCapture could easily see the images on the camera, and could copy them to a HD without difficulty. But it's not LR3, and nothing convinced the Finder to add the camera to the Devices.
Cure:
What I did find, eventually, as a method for persuading LR3 to import properly is this:
I set ImageCapture to open itself when it recognizes a camera.
I jack in the camera, and ImageCapture opens.
THEN I open LR3. It comes up with the present images in the library.
I _click_ on the Import button (lower left), OR use the keyboard command (cmd-shift-I). It opens the import display, _with_ the images from the camera.
I set the LR3 import settings as I want them - I Copy the files, change file names, presets, etc. as desired. (I make a habit not to erase the camera files, until all is said and done, and the camera is disconnected from the computer.)
I click the Import button, and it does!
SUCCESS!
If I have it open ImageCapture first, that seems to persuade LR3 that images are on the camera.
Sometimes iPhoto accomplishes the same end, but I'd rather not launch that - subsidiary issues.
I went through this sequence a number of times, starting from neither software open. I tried different sequences - LR3 then ImageCapture, camera first or last, etc. The above sequence worked reliably; the others' responses confused me.
Those of you with similar Canon uploading problems, see if this helps any. If you don't have ImageCapture, try it with iPhoto instead. Just open it first.
sandrift71, does this answer your original question & resolve the problem for you?
Message text clarified - edited by: Jay_Warner

My PS CS6 with camera raw 8.4 will not open Nikon D4s NEF files-

I have just upgraded from CS 5.1 to CS6. The initial installation went smoothly and everything seems to work as it should. The CR was version 7. I then installed all of the updates using the Check Updates option from the menu. That went fine also and the CR was updated to version 8.4.0.199 as reported under the About Plug ins. It will still open my old nef files (Nikon D700) but it will not open files from the D4s, suggesting that I upgrade camera raw. Now I have also downloaded and installed the latest DNG converter version 8.4. That will show and convert the older D700 files but will not even show the D4s files In the same folder. I uninstalled CS6 according to the uninstall instructions and then deleted the folder (Plug ins?) from the Common/Adobe location as instructed, and then reinstalled. No improvement resulted. This is on windows 7 64 bit system with all updates.

Glad to be of help. But I'm curious (not critical of what you are doing) to know why so many people like to use Nikon Transfer to transfer their files to the computer. It is still necessary to import them into Lightroom. And, from my perspective, it seems simpler and maybe even a little quicker to use the Lightroom import dialog. I have Nikon cameras, and have never even installed the Nikon Transfer utility. What is so unique about it?

Premiere Pro CC will not import .mov files

Having issues with Premiere Pro CC, I cannot import .MOV files created with my Canon 6D.
If I try to import the files, I get a very generic "File format not supported" error msg.
This is a new install of Premiere CC on a new computer. I was able to import them using Premiere Pro CC on the old computer.
Quicktime will play these files fine on my new computer.
Premiere Pro CS6 will import these files on the new computer.
Premiere Pro CC would open them fine on my old computer.
I'm not even sure where to start. Any help would be appreciated.
Here are my system details:
OSX 10.9.3
new Mac Pro
3Ghz 8-Core Xeon E5
64 GB RAM
Files are on external G-Tech Thunderbolt drive.

That was I was thinking at first, but if Premiere CS6 (installed on the same computer) imports and plays them, they must be on the system, no?
I really do not want to transcode. I have an existing project that uses the videos and the project on the new system will not import them or re-link to the videos. Really trying to get away from having to re-create the project and re-edit.
Thanks!

Adobe Bridge CS6 will not open

Just started trial of Adobe Photoshop CC ( CS6 and Bridge CS 6)
Photoshop downloaded ok but Bridge CS6 will not open after installation.
I have used Adobe Bridge with CS2 before but since removing CS2 and installing CS6 and Adobe Bridge 6 64Bit Adobe Bridge will not open.
Help
watchet7

CS2 seems to conflict with CS6. One user found this to work. AppData is a hidden folder in case you try this.
I finally got it to launch via instructions from another web page. In my case, I am running Win 7 Professional 64-bit and previously loaded Photoshop and Bridge versions CS2 (along with Illustrator and InDesign CS2), which might have been part of the problem. The solution for me was to create an empty "Bridge CS2" folder in the C:\Users\[your user name]\AppData\Roaming\Adobe\. Worked like a charm.
You might have to use the Adobe Script Cleaner to get rid of traces of the CR2 files.

Lightroom will not import my photos. It did up to a week ago. I have changed cards and cameras (both worked two weeks ago). I can import the photos to Picasa and iPhoto

Lightroom will not import my photos. It did up to a week ago. I have changed cards and cameras (both worked two weeks ago). I can import the photos to Picasa and iPhoto. I get the following error message:
Some import operations were not performed.
The following files were not imported because they could not be read [followed by a list of the files I wanted to import]
Thumbnails show up. LR just will not import them.
Any idea what is going wrong?

If the Import button is not clickable, that means that Lightroom thinks you have no new photos to import (one possible reason is that they are duplicates)
So, you need to figure out why Lightroom thinks that. The way I would do this is to search your Library module for at least one of the photos, by file name. To do this, you would follow all 4 of these steps in sequence:
Click on All Photographs in the Catalog Panel on the left of the Library Module
Turn off all Filters (Ctrl-L or Cmd-L once or twice)
Expand all stacks: Photo->Stacking->Expand All Stacks
Search for one or more of the photos using the Filter Bar (press backslash), search by File Name

AME CS6 will not import Avid QT Ref files

Similar Messages

Maybe you are looking for