AME CS6 won't even start

I have an issue where AME won't start on a win7 system, it doesn't even show the startup splashscreen.
It will show up very briefly in the task manager processes and then it just disappears. I have tried the usual remedy (which helped once before with AME 5.5), deleting the AME preferences folder inside the appdata folder, but that doesn't help at all, AME still doesn't start.
I think this has something to do with the 6.0.3 update, AME did work without a problem before I applied the update. Everything else works
Any ideas?

It's possible you simply have a defective battery. Try going down to your local Apple Store and try one of their batteries in your MBP. If it works then simply replace it.

Similar Messages

X6 errors, now it won't even start anymore

Hei!
I've had the X6 now for about a month and a half and while I was updating the software something went wrong. It couldn't reinstall the backup.
Ever since that moment my phone has been doing weird stuff.. The touchscreen sometimes doesn't respond or just fades away and the phone restarts.
I get errormessages that the memorycard can't be found (I have the 32gb version) and properties disappear.
Now the phone won't even start when I have my simcard inserted. It gives the error message 'Selftest failed, contact the reseller'.
I can't do anything with it, the message disappears when I take out the battery but when I start it up again the same message appears..
Who can help me? It's really urgent!

A hard reset (x6, 5800 and 5230 only) is done by the following (warning, this deletes all data on your phone):
1.) Turn off the phone and remove battery for 5min
2.) Reinsert battery
3.) Press and hold the green, red and camera buttons. DO NOT LET GO.
4.) While holding the three buttons, press the power key to boot the phone up.
5.) Keep on pressing until you see the country selection screen.
A correctly done hard reset would show you that everything on the phone (contacts, messages, calendar entries, etc) would be deleted. So it is advisable to back them up. Upon restoration, do not restore settings or files if possible.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

GTA Vice City won't even start?

So i just downloaded GTA vice city and it took enough to install so when it finished i tried to start it and at the same second it turns on and then off, basiclly won't even start. Has anyone gotten the app already and tried it out? Maybe solution for my problem?

It's possible you simply have a defective battery. Try going down to your local Apple Store and try one of their batteries in your MBP. If it works then simply replace it.

Download won't even start (Adobe Flashplayer)

Hello, I am using Macbook Pro - Lion Version 10.8.2. I have tried downloading/uninstalling the previous version and downloading again. But the download for the latest Adobe Flashplayer won't even start. The page just loads but the download does not start. I tried restarting my com and did all that's said in the forum.. But it seem I'm the only one facing this problem. I have made sure that I'm downloading the correct version for it, just FYI. Any one knows how I can solve it? Thanks!

Can you check to see if you have "enable plug-ins" checked in Safari's preferences dialog, under the security tab? If not, enable it and check.
It seems to be a browser specific issue. Try a different browser like chrome or firefox, it should work.
For fixing Safari, lets follow below suggestions :
Run the Flash Player Uninstaller as applicable for your machine(i.e.Windows or MAC) and remove flash player.
For MAC : http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html
Restart the machine.
Download and Re-install Flash Player.
Restart the browser and check.
[Moved the discussion to Flash Player Forum]

How do I unlock an iphone 4 when it won't even start up?

How do I unlock an iphone 4 when it won't even start up?

http://support.apple.com/kb/TS3281

Won't even start

My MBP which is just over a year old won't even start up now, I press 'Power' then it tries but just switches itself off.
Recently i started noticing that it was not charging properly as well.
Since I am out of warranty will it be a long costly procedure to determine the problem?
Your thoughts please.
Thanks.

It's possible you simply have a defective battery. Try going down to your local Apple Store and try one of their batteries in your MBP. If it works then simply replace it.

Here Drive won't even start on Lumia 520

Hello
Here Drive app is not even starting. It shows me the app logo and then throws me back to menu. Restoring factory settings did not help.

http://discussions.nokia.com/t5/HERE-Location-based-services/Nokia-Lumia-620-not-running-here-produc...
same prob

ISync won't even start up

At first, I used isync to sync my Sony Clie, but then it turns out that Palm Desktop actually works better. Now Palm Desktops will not sync. So I decided to do a backup with Isync and it wont even start, it quits out on me. I try to Reopen, but it stays looping.
Please help,
Paul

There are several issues in play here.
To begin with, have you applied the Mac OS X 10.4.9 Update? If so, did iSync 2.3 work before you applied the OS update?

New Lumia 520 won't even Start!!!!

Hi All,
My roommate just received a Nokia Lumia 520 which he ordered online a couple of days ago.
The thing is, the phone won't even boot up. The Nokia logo appears, stays, disappears for a few seconds and then gets back on again.
This has been going on for about 2.5 hours, which seems excessively long. We have tried the reset key-combo (Vol down + Lock), but I don't think there is anything to reset in this phone. My laptop was unable to install the driver for the device, reporting that the device was disconneted in between - my guess is its turning on and off again and again.
He called up the Nokia Care Hotline,and they said that the phone may take about 30-40 minutes to boot up the first time, but I think he was over-estimating, considering it took nowhere near as long for my Lumia 510 to boot up the first time.
Tough luck for the guy, but do you guys think there is something we can try to do for ourselves or do we have to get a replacement or something?
Looking forward to your responses on this post,
Thanks!

OK... final bit of info for Paul and Rayhipkiss.
While we are certain that this phone has a firmware defect, the Combo that Ray suggested is using an extra key. The actual key combo for restart the phone is Volume Down + Power.
In order to reset the phone, which I did try on this particular one, you need to bring it into Reset mode. This is done using the Volume Down key on the rocker. When successful, you see an exclamation mark. Now, you press the following keys in the mentioned sequence:
Vol Up + Vol Down + Power Key + Vol Down.
As the phone resets (Phone purges to Factory settings), two gears appear on the screen, rotating.
When done, the phone should have reset itself to normal. Unfortunately for this phone, SN=AFU.

My CS6 upgrade won't even start!

I have downloaded the CS6 Master Collection upgrade from CS4. But when I tried to open it up, its says the archieve archieve part of CS6 Master Collection is mising. I have taken screenshots of them for references:
http://pikadon92.deviantart.com/gallery/?catpath=scraps#/d5dtnk7
http://pikadon92.deviantart.com/gallery/?catpath=scraps#/d5dtnk9
http://pikadon92.deviantart.com/gallery/?catpath=scraps#/d5dtnk1
Especially on the thrid link, are there more than 4 items to download?

First of all, thanks for the screenshots.
As per the above screenshots, you MC CS6 download was not complete, either it was in process or was interrupted. This is because, if you see all the 3 screenshots, you will see the MasterCollection_CS6_LS16.7z.crdownload. Here .crdownload means the download is in process.
So, try downloading it again on the Desktop screen and make sure the download completes successfully(without the .crdownload extension) and then try installing CS6.
It should work.

AI CS6 won't run start

I've downloaded and installed AI CS6 on my Windows Vista machine using the App Manager (Cloud). The exe file starts, then closes without opening the software. I don't receive any error messages. Any suggestions?

Adobe doesn't officially supported Vista, but I can run it. I downloaded the 30 day test version of CS6 right after my problem and that runs fine on my computer. I got an Adobe Cloud membership yesterday and the version downloaded from the Cloud (using Adobe Application Manager)won't open on my computer. I tried again through the Cloud to download a different software, too (InDesign), and it does the same thing: I click on the exe, it shows up in my processes window, then disappears again without having opened anything. I never get any error messages for either software. Has anyone else using the Cloud had similar problems?

AME CS6 won't launch

I upgraded from CS5.5 to CS6 Creative and all programs work but AME. When trying to launch I get a spinning activity icon for a second and then nothing. No processes start and it does not launch. I have tried the following:
Opening as Admin
Using a different User profile
Trashing all preferences
Deleting Adobe User xml files
Launching from Premiere, launching independently with Premiere running and with Premiere closed
Copying the AME folder to a different drive. Renaming the old and putting the copied folder back into place (something that was suggested on a thread)
Uninstalling and re-installing (twice with a CS cleaner tool each time)
I am able to encode from Premiere but not to queue.
I am running Window 7 Premium on a 64bit on an Intel 2.7ghz i7 Quad Core with 9gig of RAM. Again no issues with other programs in suite.
Any help or thoughts are appreciated. Thanks in advance.

I see 21 people have viewed this but no responses. Anyone have any ideas?

Safari won't even start since update to 3.2

I am having the same problem as lots of others I am reading about here. Since I upgraded to 3.2, Safari won't open at all. Just gives me the message that Safari "unexpectedly quit" before it even opens. I have been reading the posts and have tried deleting all the plugins (although I didn't seem to have the ones that were causing others trouble) I deleted all except bookmark.plist in user/library/safari. I even called Apple. She had me delete Quicktime, clear Cache, clear cookies. Nothing worked. She wants me to Archive & Install. Last time I did that I had a very bad experience (and it turned out it wasn't really necessary, anyway) so I am avoiding that.
So for now I am just using Firefox and hoping that someone will come up with an answer that will work for me.
Thanks

She had me delete Quicktime
An Apple employee told you that? You should never do that. Quicktime is a fully integrated part of the operating system and should not be deleted.
Rather than attempt a reinstall of bits and pieces I would also recommend an Archive and Install.
How to Archive & Install:
http://docs.info.apple.com/article.html?artnum=107120
This document explains how to correctly reinstall a prior version of Mac OS X in the event that other troubleshooting does not resolve an issue:
http://docs.info.apple.com/article.html?artnum=25404
BUT: Don't install older versions of Mac OS than what comes with your computer:
http://docs.info.apple.com/article.html?artnum=25497
Once your operating system is functioning properly again you, and you have installed all security and Quicktime updates relevant to your system, this might help:
If your Safari keeps crashing, or if you are updating Safari (or just have):
N.B. Never delete Safari, never run it under Rosetta, don't use proxy settings.
(If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Safari 3.2 for download can be found here:
http://www.apple.com/safari/download/
Make sure you download the correct version for your system.
Also, observe the standard procedure for installing software: repair permissions and close all applications, install, then repair permissions again.)
Input Managers and other plug-ins from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 used Safari 3.0.4 which was not a beta and which was updated to v.3.1.2, and now both Tiger and Leopard uses Safari 3.2. If Safari 3.2 is not the fastest browser you have ever used, then something is wrong!
(Trying to revert to a previous version of Safari can have repercussions, as Safari 3.x uses a completely different webkit on which other applications like iChat, Mail, Dashboard Widgets etc also rely, but if you really want to do this post back for instructions on the safe way to do so.)
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on. Add-ons that have been frequently mentioned here, among others, for causing such problems are Piclens, Saft, AcidSearch and Pithhelmet. If you have them, trash them and go the developer's sites to see if new versions are available for Safari 3.2.
You should also ensure that you have downloaded and installed the correct version for your Mac of Security Updates up to 2008-007, which is required for Safari 3.2. Like all security updates, these require a restart and a permission repair. Note that 2008-007 is a combo update: if you have missed a couple of updates this one will suffice.
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
• Hard Disk/Library/InputManagers
• Home/Library/InputManagers
especially prior to system updates and updates to Safari (they can always be added back one-by-one later).

AME CS6 hangs upon clicking "start"

Hello all,
Forgive me if this has been discussed previously. I have searched the forum and come up empty handed.
I am running OS X Snow Leopard with AME CS 6 and Premiere CS 6. I encounter problems when I try to queue files from Premiere, or even when I plain import them from finder. I choose my settings (often H. 264 / DV Widescreen 24p) and click start. The screen hangs with no motion and the "encoding" bar doesn't budge. Strangely, I can still cancel the job from within the program. It is not completely frozen.
This problem occurred after 48 hours successful use of the utility, and I changed nothing in the process. I have reinstalled AME and Premiere, and performed preference resetting by holding shift upon AME startup.
Can anyone else suggest a solution? Thank you so much.

Server-side user profiles, references to previously opened files on network volumes, all other network stuff you can imagine. AI is notoriously inept at most of that. Beyond that anything from color profiles, fonts, printers and other configuration stuff can have similar effects. Also you may need deal with that PDF stuff that Apple hide/ suppress on newer versions of OSX. Not a current Mac user, though, just throwing out recollections from things I've read here and there...
Mylenium

T61 - Blue screen error message (nv4_disp) - Now computer won't even start!

Hi I have a Lenovo T61 (Type: 7662-CTO) Windows XP.
A couple days ago, all of sudden my screen turned in a yellowish hue, started flickering intensely and froze; I had to manually shut it off (by pushing the power button).
Next day, I started my computer and it worked fine until I had the exact same flickering and freezing issue, but this time, the screen didn't turn in a yellowish hue. Once again, I manually shut it off and went to bed.
This morning, however, when I started my computer, my screen went totally blank, though I could hear my computer running. I hooked it up to my TV to see if anything comes up and that's when I got this blue screen of error message.
It says:
================================================================================
Problem has been detected and windows has been shut down to prevent damage to your computer.
Problem seems to be caused by the following file: nv4_disp
If this is the first time you’ve seen this stop error screen, restart your computer.
If this screen appears again, follow these steps:
The device driver got stuck in an infinite loop. This usually indicates problem with the device itself or with the device driver programming the hardware incorrectly.
Please check with your hardware device vendor for any driver updates.
Technical information:
** STOP: 0x000000EA (0x8A4803C8, 0x88FFD500, 0xBA4EFCBC, 0x00000001)
nv4_disp
beginning dump of physical memory
physical memory dump complete.
contact your system administrator or technical support group for further assistance.
==================================================================================
It would show this blue screen very briefly and rebooted by itself (without letting me log in windows), so I had to once again manually shut it off.
I thought perhaps cleaning a fan might help, so I opened up my laptop, cleaned the fan, keyboard, palm rest etc and assembled it back together.
When I turned on my computer, now I'm getting NOTHING. Not even a blue screen. Computer would start, but very briefly after (just a few seconds after), it would just shut it off by itself.
Someone please tell me what's wrong with my computer and if I can revive it at all.
Also, would you recommend me to bring it to the local Lenovo repair center (http://bplocator.lenovo.com/)?
Thanks so much for reading a long message.

marissa07, welcome to the forum,
marissa07 wrote:
......snip..
================================================================================
The device driver got stuck in an infinite loop. This usually indicates problem with the device itself or with the device driver programming the hardware incorrectly.
Please check with your hardware device vendor for any driver updates.
==================================================================================
Have you tried updating your graphics driver?
Error message in Windows XP: "STOP 0x000000EA THREAD_STUCK_IN_DEVICE_DRIVER"
You can find the latest driver for your system here. Another option would be to run ThinkVantage System Update, which is hopefully on your system, if not you can find it here.
I'm not saying this is the solution or ruling out a hardware problem, (which the flickering suggests), but it's a good place to start
Let us know
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

AME CS6 won't even start

Similar Messages

Maybe you are looking for