AME for Custom Workflow

Hi
I have created a custom workflow and I want to implement approvals as well in that workflow. I want to use AME for that because AME will give following functionalities
1. Return for Correction
2. Update Action
3. Adding ad-hoc approvers
Is there any document that refer to workflow and AME integration ?
Do all above functions (1,2,3) will automatically exist in AME or I have to implement those functions

Gaurav,
AME and WF work hand in hand. I believe ML Doc 378312.1 (What are the ramifications of implementing AME with workflow already set up?) will answer your questions.
Pl also refer to ML Doc 431815.1 (Frequently asked Questions on AME)
HTH
Srini

Similar Messages

Quote Approval Workflow (ASOAPPRV) setup for customized workflow initiation

Hi,
We have customized Quote Approval Workflow (ASOAPPRV) XXXASOAPPRV, would like to understand how to setup that custom workflow XXXASOAPPRV will be triggered for Quote Approval process, when we submit the Quote for approval from Quotes screen.
Appreciate your help on this.
Regards,
Ram

Pl see your duplicate post here - Quote Approval Workflow (ASOAPPRV) setup for customized workflow initiation
Srini

Creation of system object for customized workflow

Hi Experts,
I am required to define a System Object with system alias, for creation of UWL to trigger Customized work flow's.
What WAS properties and Connection Properties and ITS Properties i should maintain in newly created System Object?
how do create UWL so that it triggers Customized workflow instead of standard workflow in R/3?
I have similarly total 3 Customized workflow so do i need to create three UWL's for each one?
Please help me out!
Regards,
Siva

Hi Shabir,
I am new to EP can you please let me know how to create custom connector? that triggers three custom developed workflow?
and Please let me know what parameters to pass to create system object(like WAS Properties, ITS Properties etc)
Thanks in advance!
Regards,
Siva

UWL modification for Custom Workflow

Hello ,
We are implementing Expense Approval on EP7.0 via UWL....there is a custom workflow in the ECC system which was being used earlier in ITS....we want the same Inbox entries on portal and give managers the option to Approve from there....they are able to Approve .....but the "Approve with Changes" button is not working ....it just says "Successful" at the top but does not actually approve it ....do we need to make changes in the UWL XML file for this...?
Any help would be highly appreciated.

Hi Saurabh,
try to add your custom attribute in your view com.sap.pct.erp.mss.myOpenTasksTimeAp how <DisplayAttributes>.
Example:
<View name=...........
<DisplayAttributes>
<DisplayAttribute name="REQ_ID" type="string" width="" sortable="yes" format="default" referenceBundle="decision" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes"/>
<DisplayAttribute name="VERS_NO" type="string" width="" sortable="yes" format="default" referenceBundle="decision" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes"/>
</DisplayAttributes>
Change the type and the other property of displayattribute as you want.
Regards,
Rocco
Edited by: Rocco P. on Oct 20, 2011 10:39 AM

Event Linkage for custom Workflow and Custom BO

Hi Friends,
I have created one Custom Module Pool, Business Object and Workflow Definition. In Business Object I have created one Business Event and the event is triggered from Custom Module Pool using function module SWE_EVENT_CREATE. I have created event linkage in transaction SWETYPV and receiver type given Workflow Template No: (WS*) and receiver function Module SWW_WI_CREATE_VIA_EVENT_IBF and checked Event Linkage Active checkbox. Finally I have activated the Triggering Event in the Workflow basic data section. But the Workflow is not getting triggered. Can anyone of you give me a solution for this or tell whether i missed any of the setting for the workflow?
Regards
Sujith

Hi Sujith,
Did you include a commit work statement after the call to SWE_EVENT_CREATE?
Regards
Gareth

WD application is not opening in UWL for custom workflow

Hi,
I have created entries in SWFVISU, and webflow connecter also has entries for my custom task .
I can see work item in UWL but as soon as I click on workitem I am not able to see application or workitem .
Kindly check screenshot.
Regards,
Vijay

Hi Vijay,
As prashanth said please activate the services in the SICF and generate the error once again and check the log in nwa-->trouoble shooting-->logs and traces -->developer traces and check the error their.
Regards,
Anil

Code for Custom Workflow to auto approve the task

Hi All,
Can any body help me with the java code to complete the Auto Approval Task.in OIM 11.1.1.5.
Thank you

1. Get the requester information from the payload. (In the Oracle sample the request Id is brought from the payload, similarly you can get the requester id and etc).
2. Get the target user information from the payload along with target user's manager.
3. Set the data from the two above into global variables and copy them into your .task variables.
4. In the task use two serial stages and inside the stage use the skip rule condition with the variables from step 3.
-Bikash

Custom Workflow - Reports

Hi,
How do we define a custom workflow to generate a report? The report is to get all the users and there attributes from LDAP. I do understand a form also has to be associated with the WF. I have no clue how to head start with custom reporting,
Please update me or also if possible provide some sample custom workflow , forms , rule for custom workflow reports.
Thanks

Hello All,
Did anyone got this working?
I have a requirement wherein i have to get the report results back into a wf and use it for further tasks.
Can someone help or provide inputs regarding Process View. Or how to call a report from a wf?
Thanks in advance.

How to use position hierarchy for approval in custom workflow ?

Dear All,
I have created a custom workflow which fires when ever a new supplier site is created.
Now I want to add approval hierarchy in this flow. For that I want to use Position Hierarchy.
I have not find useful resources for doing that. Can you please help me?
Regards,
Rubayat

Hi;
Please review:
How to Create a New Position Hierarchy [ID 437489.1]
Adding Positions to a Hierarchy from Another Business Group [ID 356127.1]
How To Determine Position Controlled Organizations In The Hierarchy? [ID 549628.1]
How Does One Create and/or Update Position and Position Hierarchy in HR Using an API? [ID 736443.1]
Using AME, How To Create Approval Routing To a Certain Position In HR Position Hierarchy [ID 1501433.1]
Regard
Helios

Customizing request for a workflow

Dear experts,
I have created a workflow. I want to move the workflow from one client to other for testing it. For this i need to transport workbench and customizing requests of my workflow. Can you please tell me how to find the workbench and customizing request of my workflow. Is there any option in SWDD which will show the specific workflow & customizing request for that workflow.

Hi,
se01 will help you find the transport with your workflow but not the any other transports which may be part of your workflow project.
se10 transaction can be used to see transports by user. Check off both customizing and workbench requests since you will have both types of transports. The user id needs to be that of the developer that created the transport. Modified vs Released - select both if you are not sure if the transports have been released or not.
Paul.

Need Help: Workflow Decision Task not visible in NWBC for customer Task

Hello All,
I am new to NWBC configuration , need ur expert knowledge for the below issue. I have checked the treat . Approve/Reject button for SRM Approval for RFx response ,but not able to get the exact steps for the configurations in NWBC.
Requirement.
     We are working on SLM/SRM module, where we have requirement to create a custom workflow with custom Task for which we have executed below actions.
Created the Custom Workflow.
Created the custom Task with custom ZCLASS and ZEVET.
Created   Event linkages in SWE2.
After doing this we are getting the workitem in the NWBC, currently we don’t have the Portal system in place, so we are using the NWBC for all our testing.
What is the issue?
     When we select the workitem in the NWBC (UML) inbox , the Decision Task ie “Approve” or “Reject” button are not visible , where as for SAP standard Task buttons are visible.
What help we need?
When we cross check the SCN/IBM portal, found that we need to do the XML file configurations. Can you any one kindly let us know the steps we need to follow to achieve our functionality.
Thanks a lot in advance.
Thanks and Regards
Channa

You need to share the details of what Inbox you are using, configuration steps depend on it. If you aren't using portal, you aren't using UWL and there is no UML inbox. You need to get your facts straight. Most likely you are using the Business Workflow Inbox (SWF_WORKPLACE) or the Lean Inbox (IBO_WDA_INBOX). Both are based on Web Dynpro ABAP and POWL but the configuration is different. Regardless, you posted this in the wrong space. Correct space is either SAP NetWeaver Business Client or Web Dynpro ABAP.

Custom Workflow for sending Remainder mail in MS CRM 2013/2015 online

Hi All,
We have a requirement to send a remainder email before 5 days,3 days and on the same day of the M/TC date in lead form. To achieve this we tried using Custom Workflow. Below is the logic tried but in the highlighted line
not able to retrieve the "M/TC date" value, this results in no output.
Kindly suggest where we are going wrong or a best approach to do this.
Parameters:
[RequiredArgument]
        [Input("InputEntity")]
        [ReferenceTarget("lead")]
public
InArgument<EntityReference>inputlead
{ get;
set; }
        [Output("TaskCreated")]
        [ReferenceTarget("task")]
public
OutArgument<EntityReference>
taskCreated { get;
set; }
code:
   try
           Entity lead
= (Entity)service.Retrieve("lead",
context.PrimaryEntityId, new ColumnSet(newString[]
{ "new_mtcdate" })); // (unable to
retrieve the mtcdate)
                  Guid leadId
= this.inputlead.Get(executionContext).Id;
                if(lead.Contains("new_mtcdate"))
                  {  DateTime date
= DateTime.Now;
                      DateTime mtcdate
= (DateTime)lead["new_mtcdate"];
                      TimeSpan elapsed
= date.Subtract(mtcdate);
                      double days
= elapsed.TotalDays;
                      Entity task
= new Entity();
                      task.LogicalName = "task";
                      if (days
== 5)
                      {task["subject"]
= "Five days more for the Meeting";
                          task["regardingobjectid"]=new EntityReference("lead",leadId);
                           Guid taskId
= service.Create(task);
                        this.taskCreated.Set(executionContext,new EntityReference("task",
taskId));}
                      if (days
== 3)
                      {task["subject"]
= "Three days more for the Meeting";
                          task["regardingobjectid"]=new EntityReference("lead",leadId);
                           Guid taskId
= service.Create(task);
                        this.taskCreated.Set(executionContext,new EntityReference("task",
taskId));}
                      if (days
== 0)
                      {task["subject"]
= "Today you have Meeting";
                          task["regardingobjectid"]=new EntityReference("lead",leadId);
                           Guid taskId
= service.Create(task);
                        this.taskCreated.Set(executionContext,new EntityReference("task",
taskId));
Regards, Rekha.J

Hi,
Try with replacing
Entity lead = service.Retrieve("lead", context.PrimaryEntityId, new ColumnSet(new string[] { "new_mtcdate" }));
also make it confirm, you are getting EntityId.
Also check  Link

Custom workflow for Fiori Approve Timesheets

Hello All,
I am investigating complexity of adding custom workflow to Approve Timesheets.
There is BADI SRA010_BADI_TIMESHEET_APV.
Any experiences/advices ?

Hi Lukasz,
How do you change approver using data from Ztable in the current system?
If you are talking about workflow approver determination logic, it is a job for Workflow Engine and not for Fiori.
Regards, Masa
SAP Customer Experience Group - CEG

Sharepoint 2013 Custom Workflow - Email link to EditForm.aspx for Workflow Task

I have created a custom workflow which starts a task with one or two users once a form is submitted. These users receive an email with a link to the task that has been created. The problem is it doesn't open the edit form for the task it just
links to the displaypage.asp for the task. This is causing all sorts of confusion so I just wanted to change the link to the edit form instead.
It seems simple enough but I just cant find a way to do it?! I am a beginner in this stuff so I have no visual studio experience and have designed all this using SPD 2013.
Is there an easy way around this? Any help would be greatly appreciated!

Hi KM, see the following link for a step-by-step process:
https://support.office.com/en-in/article/Send-e-mail-in-a-workflow-11d5f9dd-955f-412c-b70f-cde4214204f4?ui=en-US&rs=en-IN&ad=IN#bm5
cameron rautmann

Debug background task in custom workflow for PO change

Hi,
We are on ECC 6.0 EHP7.
I have a custom workflow for PO object type(delegated to std object type BUS2012).
There is a background task which has some custom code written and I need to debug this code.
Can someone please let me know how to debug a background task?
Thanks.

As suggested by ronen we can debug through swo1 but we have to pass values manually for importing parameters, by using sm50 also we can do debug and there is one more way to debug
if its custom task change background task to fore ground and change business object method also change it to fore ground and activate the work flow.
now change any po then it will stop at that step now take that work item id in swi1 and go to swia and execute after putting break point in that method of business object.
But best way to debug through infinite loop i.e sm50.
suri

AME for Custom Workflow

Similar Messages

Maybe you are looking for