AME locking up with new multi-band audio processor in Pr CC

The AME locks up when I insert the new multi- band processor in Pr CC. The Legacy one does not create this issue... Any thoughts??

I'm not seeing that here. The effect works fine. Let's start with this:
FAQ: What information should I provide when asking a question on this forum?

Similar Messages

V. Slow transfer speeds with new dual band Airport Extreme

I have a new Airport Extreme (late 2009, dual band, full 'N' spec) which I am using to replace an older Airport Extreme (early 2008, 5Ghz, 'draft' N).
I have a USB disk attached and was interested in benchmarking the transfer speed of the new Extreme, compared to the previous version. The results are puzzling / alarming.
Shown below are transfer speeds (file copied to the attached USB drive) under different connection standards (2.4Ghz / 5Ghz & a/b/g/n)
'Old' Airport Extreme
5Ghz - 'draft' N : ~5-7 Mb/sec
'New' Airport Extreme
2.4Ghz - b/g : ~3-5 Mb/sec
5.0Ghz - a : ~3-7 Mb/sec
5.0Ghz - N : ~200 Kb/sec
Hence transfer speeds appear to collapse when I try to make use of the 'N' spec with the latest Extreme. I have tried altering items such as - wide channels (on / off), interference robustness (on / off), 5Ghz channel (manual, instead of auto), with no upside.
I seem to be at the point of concluding that either
1. I have a 'broken' Airport Extreme
2. The WiFi card on my early 2008 iMac (which implements I guess the 'draft' N standard) is 'incompatible' with new the Airport Extreme under a 'N' connection.
Any thoughts ?

Since all devices in my wireless network are capable of latest 802.11n protocol, I really do not need older and slower 802.11a/b/g protocols. To achieve above 200 Mbit/sec, 5GHz band with wide channel option turned on is really necessary. Thus I really wish I can turn off the 2.4GHz radio band (seems Apple has set this band as default) of my new dual band Airport Extreme to avoid unwanted bandwidth degradation. Unfortunately this is not possible with radio mode setting in Airport Utility.
The best I can do to force connection with 5GHz radio band (with quite consistent result) is as follows:
On Airport Extreme through [Airport Utility>Wireless] :
Radio Mode: 802.11n only (5Ghz) - 802.11b/g/n
More Options>Wireless Network Option>Transmit Power: 100%
More Options>Wireless Network Option>Use Wide Channels: checked
More Options>Wireless Network Option>5 GHz Network Name:
checked and same network name with extra suffix "(5 GHz)"
On 27" iMac through [System Preferences>Network>AirPort>Advanced>AirPort]:
Preferred Networks:
Create only one profile in Preferred Networks for the above network name with suffix "(5GHz)"
Uncheck the option [Remember networks this computer has joined] to ensure there is only one profile under Preferred Networks .
Once all above settings are done, restart Airport Extreme in Airport Utility. Your computer should connect wirelessly to the base station through 5GHz band after booting most of the time. Even when it is not occasionally, simply go to the Airport icon in main menu bar and click on the network name with suffix "(5GHz)" in dropped-down list to connect manually. With all these settings, I have achieved 300 Mbit/sec bandwidth on my iMac most of the time for fast Time Machine backup.
How I wish feature for better radio mode control by end user will be implemented in next update of Airport Utility. Apple should trust end user's brain better than artificial intelligence (or ignorance ?) in wireless network implementation. Wireless traffic between the two radio bands and among various wireless devices should be segregated specifically in Airport Utility by end users whenever dual band Airport base stations are in use.

Issue with new dual band APE

I am having an issue keeping a good connection on the 5ghz channel with my new dual band airport extreme. Let me explain my current network. I just purchased a new APE. Airport utility shows it as AirPort Extreme Dual Band II with 7.5.1 firmware. I have it running a 2.4ghz G network and a 5ghz N network. In the basement I have my older APE which is a Airport Extreme N with gigabit ethernet (7.4.2 firmware). It is set to join 5ghz network from the dual band and then acts as a hub to my gaming Windows PC, ps3, and xbox. The 5ghz network is very spotty, it will work fine and I can browse away for about a minute and then it will just stop. My laptop and ipad will still show full signal strength, safari will just end up timing out while waiting. If I move them over to the 2.4ghz G network everything works fine, except of course file transfers which are slow because of being on the G network. Also should the older router be on a higher version number of firmware? I have tried checking for updates on both.

+Something seems off.+
Absolutely.
At 2.4 GHz, the high noise level indicates that you are experiencing interference from another wireless network (do you see other networks in iStumbler?), cordless phones (could be yours or your neighbors', a nearby wireless security system, microwave interference...lots of possibilities.
iStumber may not display "hidden" networks. Most modern routers (Apple included) allow users to "hide" their network, so it's possible that you may be experiencing interference from a wireless network that you cannot "see".
If you have cordless phones, you might want to pick a time when you can power them and their base stations completely down for a few hours to see if the wireless signal improves and noise drops on your network. Not much you can do about a neighbor's cordless phone or security system.
Experiment with different channel settings on your 2.4 GHz wireless as well.
Most cordless phone will not interfere with 5 GHz. I can't explain why your 5 GHz signal is so low..and the noise high..if you are close to the router and have line of sight between devices. Try a few different channel settings on 5 GHz as well.
Let us know what you find.

BSOD / Lock-ups with new Q9550 in P965 Platinum

MSI P965 Platinum Mobo
E6700 CPU, recently upgraded to Q9550
Zalman Cu heat sink + fan.
4GB Corsair 6400 C4 (4-4-4-12 800 MHz)
MSI 8800 GTX graphics
Auzentech Meridian sound
2 x 36GB Raptors RAID 0 (System)
2 x 250 GB Western Digital Caviar WD2500KS RAID 0 (Data)
Corsair HX620W PSU
All drives attached to the ICH8R Intel RAID controller.
BIOS: 1.8 (latest)
Vista Ultimate 32 bit SP1 + latest patches
Intel Matrix Storage Manager v8.6
Hi all,
I have run with the above hardware specification since Jan 2007 without experiencing any hardware problems at all. Two weeks ago I upgraded the CPU from an E6700 dual-core to a Q9550 quad. I was a little concerned about doing this, because the P965 supports a max FSB of 1066 and the Q9550 is rated at 1333. In any case, I Googled around and found that some flavours of the Q9550 had been tested on my mobo (http://www.cpu-upgrade.com/mb-MSI/P965_Platinum_(MS-238).html) and also MSI list the Q9550 stepping C1 as being compatible so I took the leap.
Early indications were good - Vista detected the new chip and I rebooted when prompted. However, in the space of two weeks I have experienced around one or two BSODs per day STOP 101 or 124 codes. Hmm!
I have switched back to my trusty E6700 chip and the system is then as solid as a rock. I see 3 possibilities here:
1.The Mobo website (MSI P965) lists the Q9550 stepping type C1 as being compatible. There is no mention of E0 or C0 which seem to be the other two variants. I have no idea which stepping type mine is as the product numbers for the Q9550 chips are all the same (EU80569PJ073N or BX80569Q9550) regardless of whether it is a C0, C1 or E0 stepping. Is there any way to tell which on I have - I tried with CPU-Z but didn't spot the stepping type? In any case, could this be the problem or am I off-base?
2. It's possible I have a faulty chip. How likely is this do you think? I could ask for a swap with Novatech but could be back in the same boat, and they will reject the return unless it is 'proven faulty'.
3. I need to mod the clocking on my rig to support the Q9550. If so, can anyone advise on what I should do?
I doubt the problem is caused by an OS factor as I ran some tested in an XP pre-boot environmet and still got the lock-ups.
What should I do? i don't really want to ebay the chip at say a £50 loss if i can help it.
Many thanks in advance.

Quote
I have no idea which stepping type mine is as the product numbers for the Q9550 chips are all the same (EU80569PJ073N or BX80569Q9550) regardless of whether it is a C0, C1 or E0 stepping.
No, the OEM Order Code is different, and the sSpec Number also.
Have a look at these links
Q9550=SLAWQ=C1--> http://processorfinder.intel.com/details.aspx?sSpec=SLAWQ
Q9550=SLB8V=E0 --> http://processorfinder.intel.com/details.aspx?sSpec=SLB8V

IPod Won't Update with New Playlists and Audio Only

My iPod will not update new playlists that have been created or add any audio files from iTunes. Videos come over just fine. Powerbook 12" G4 with 10.4.4, iTunes 6.0.2. Latest iPod software, 0106, deleted the old iPod updates. Also, did a hard reset on the iPod.
Under my administrator test login, playlists and songs come over fine, but I can't seem to get it to work in my regular account. Any idea what do do without reformatting my hard drive and reloading software?

I also just started having this trouble on my 6 month old nano. I have it set to automatically update selected playlists only. I update the songs in those playlists in itunes, then I connect my ipod to my PC. The ipod and itunes say it is updating, but when done the same old songs are on the playlists in the ipod. Itunes does show the correct playlists with the update songs, they just don't seem be updating on the ipod, even though there seems to be a good connection and the ipod says it is updating when plugged into the PC. Any thoughts?

Itunes locking up with new ipod

I have a ipod video and an older 20G, I just brought a 2G nano, and yes I have the updated 7.0 itunes. My itunes locks up every time that I place the newer nano onto the computer. I have restored the nano, and still nothing. Only thing that I can tell you is that the itunes is telling me that it is updating my nano everytime that I connect it. But it isn't. I have gone into an apple store and they told me to restore the nano and update to the 7.0 version of itunes. I have done this all and I would simply like to be able to go running with my nano~! Thanks for any help, really!
Nano 2G Windows XP Pro updated itunes 7.0

I don't know. I'm simply suggesting some troubleshooting steps to take. If you can isolate the fault to the iPod itself then you can go from there.

IPhone will not wake from sleep and locks up with new MMS update

Hey everyone,
Has anyone had these problems with their new update as well?
1) Sometimes my iPhone will not wake from sleep mode, I have to hold down both buttons for it to restart...I do this about 5 times a day!
2) I cannot send SMS messages and when I send more than one sometimes the iPhone locks up and will not unfreeze.
Does anyone know if this is an Apple update issue or if it is an AT&T issue? And if this is being addressed?
Apple, if you read this could there be an update to all members what is going on?

I am experiencing the same issue with iPhone 3GS. After yesterday update to 3.1.2, it is a bit better in the sense that I can restart the iPhone slightly faster but still getting frozen screen during a call. I will try to call support once more. I don't believe that the problem is solved in the new update.

LOCK REMOTELY WITH NEW PASSCODE

Hi,
we need to lock our devices remotely with a new passcode we create it not
the existing one.
this is more secure especially when you lose your device in your home.
regards.

I just want to add that I am able to print wirelessly from my computer but not when I am remoting in to my work computer.

Audio Problem with new Apple TV: Audio Optical (Toslink) to RCA

Hi guys,
I just set up my new Apple TV but don't have any audio so far (picture works).
It's probably because I connected the HDMI to DVI, as my Sony TV only has DVI.
Now I am thinking about getting audio by connecting the optical audio of the Apple TV to my stereo receiver to solve this issue.
Problem: my Sony STR-D315 receiver only has RCA connectors ( looking like this: http://media.photobucket.com/image/receiver%20rca/xyphon112/IMG_1701.jpg not sure if this is digital or analog)
Now I figured out that there would be converters:
http://www.canadacomputers.com/advancedsearchresult.php?keywords=toslink+converter&sid=moqhnqo7m5eup531h3dp3l62g4
Do you think this could solve my problem? I am little confused atm, but would I need the "toslink to digital coaxial(RCA)" or the "digital coaxial (RCA) to toslink" product?
My shopping list atm would basically be:
- the converter
- optical cable ( http://store.apple.com/us/product/TR841LL/A )
- this RCA cable ( http://www.daydeal.com/files/images3/blkrcacable.jpg )
Do you think this might work?
My goal is only to get sound, doesn't need to be super quality
Feedback from a cable expert would be very much appreciated.
Thank you very much in advance!!!
Martin

Jim, thank you so much for your answer.
That's what I was worrying about, I also think that the audio inputs of my Sony STR-D315 receiver are only analog. My Sony TV has audio input but unfortuntately it's not optical
A "TOSLINK to analog RCA converter" really sounds like the only solution. Would this be an appropriate one?
http://www.canadacomputers.com/productinfo.php?cPath=5_72_73&itemid=032471
I really like the new Apple TV but want to avoid buying a new receiver (or even TV). So thanks a lot for your help.
Have a good evening & all the best,
Martin

Is there a way to take the camera off lock screen with new 4s update? Or make it so you can't see my pictures?

This is the one thing about the update that I just can't stand. There needs to be a way to fix this problem because I don't want anyone who happens to pick up my phone to be able to see my pictures. Also it's kind of annoying.

If you set the Require Passcode to Immediately in Settings>General>Passcode Lock>Require Passcode>Immediately the iPhone cannot be accessed even if the camera was opened accidentally and subsequently neither could your photos as a message would appear stating Your iPhone is Locked.

Acrobat XI Pro performance with new Intel Core M processor

EDIT 21-Feb-2015: the issue seems to be with the power limitation of the new Intel Core M Broadwell processor. Enabling it in "full performance" mode significantly increases the performance. Nonetheless, in whichever power mode the computer is set, Microsoft Reader has no issue with any of the operations listed below.
Hi,
I'm running Acrobat XI Pro on Windows 8.1 64-bit with high-res display (3200x1800, Lenovo Yoga 3 Pro), which uses the new Intel Core M Broadwell processor.
Zooming in and out and panning on the main application is very laggy, and full screen is EXTREMELY laggy. Also very noticeable delays in scrolling and page to page.
The computer is brand new, out of the box, no viruses or other software dragging the system down. Also, if I open the same files on the Microsoft Reader app, there is no lag at all in doing these operations.
I have found on the forum that some people have had lag and disabled Protected View and Enhanced Security. However, Protected View is not enabled on my installation, and disabling Enhanced Security has no effect.
Right now I would say that the zoom/pan performance is worse even than on Reader on a 5 year old Windows XP machine I tried to compare to.
Is there some other settings in Acrobat XI that could cause this issue?
Thanks!
P.S. I couldn't find a more appropriate group other than "Acrobat Installation & Update Issues" as I didn't find a troubleshooting group or anything like that, but can re-categorize.

Hi Antonio,
You might want to file a Bug report at: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&loc=en
Regards,
Rave

New G4 (Digital Audio) processor cooling fan?

The OEM processor fan on my 800 MHz G4 is kind of annoying and the SilenX fans have worked out pretty well for me but I don't know the dimensions of the processor fan and how much CFM it puts out. I don't want to lose any airflow. Does anyone know?

Remove the fan and read its label. Google the exact part number from the underlying manufacturer, such as Sunon \[not the Apple part number]. You can usually find the specs for the fan, along with the realization that exact replacements are only available in the handy 10,000-pack.
You should learn:
air moved in cfm
noise generated in dB
type of bearing provided
If you do not learn the size, measure the housing in mm, e.g. 60 mm square by 25 mm deep.
If you find a nice fan with a third yellow wire, that is an RPM output. You can leave it disconnected and just connect the red and yellow wires, and nothing bad will happen.

Need help with the new Multi-cam feature in CC

Hi,
I'm trying to use the Multi-cam feature in CC and have a few questions, so would be happy with help/advice for any of the issues below. The platform is Windows 7 Pro 64bit.
The first question is what am I doing wrong? This question relates to the fact I'm trying to use Multi-cam and encountering a lot of frustrating glitches, as sometimes it seems to work and at others it doesn't.
The video I'm trying to edit comes from a dance show so I created a sequence called Act 1. I then highlighted the six clips of Act 1 with Cam 01 at the top, as I wanted the audio from this clip and made a Multi-cam feature using the audio synch. I dragged it to the sequence, set the prog window to Multi-cam and was amazed at how well it had synchronised all clips, as I could see all six clips with great audio synch from Cam 01. So far so good and after thinking how brilliant it was, things went downhill from there
I started by using ripple delete to drag to the start of Act one and then tried editing with Multi-cam. That's where I encountered the first problem, as sometimes it seemed to toggle between cams but didn't put edit points in and the selected cam had a yellow border and not a red one. At other times it inserted edit points when I changed cams and the selected cam has a red border. I can't work out what I'm doing, or not doing for this to happen. Can anyone help please?
The second question is how do I cut audio and video at exactly the same point, as I want to edit out pauses in between the different elements of the actual dance show. When I use the razor tool in Multi-cam it only cuts the video. I tried highliting audio and video using shift, but to no effect. If it matters audio and video are shown as linked when I right click. I thought I might get it to work if I revealed all original clips within the MC nest using the technique shown in "Adobe Learn." This was Ctrl double click, but it resulted in the third problem.
When I tried Ctrl double click I ended up with only Cam 02 showing in the V2 track and after some frustrating attempts at resolving this issue I decided to start all over again. I deleted the PP project and created a new one, importing everything again. I followed exactly the same procedure as I originally did to create a Multi-cam nest, but when I dragged it to the new sequence I saw Cam 02 in V2 of the sequence, which is the same as it was before I deleted the original project. Premiere Pro seems to have annoyingly remembered the actions that went wrong, so please can anyone tell me how to tell Premiere Pro not to do this?
Thanks if anyone can help me on any of the issues.

In Premiere Pro, multi-camera is accomplished by nesting a sequence. There's a new, more automated way of doing this in CC. View the steps here: http://blogs.adobe.com/premierepro/2013/04/a-quick-walkthrough-of-editing-a-multi-camera-s equence-with-clips-synchronized-by-audio.html
HOWEVER, you must be warned that multi-cam in CC is currently broken. A patch is in the works, but until it is released you should not use multi-cam in CC.

Multicam editing with multi-track audio?

Does anyone know how to do multicam editing with multi-track audio? Apparently, the multicam editor can only see Audio Track #1 in the Source Sequence. I tried mixing my original audio tracks #1, #2, and #3 (submixes) to the master audio track in the Source Sequence and if I listen to the new Multicam Sequence (the nested Source Sequence) all 3 original audio tracks are there (combined), but when I go to do the multicam edit in the multicam monitor window, I"m back to just Audio Track #1 of the Source Sequence and audio tracks #2 and #3 are missing ??? Thanks for your help!

I have run the gambit of different techniques. The one that is most efficient is listed in Colin Brougham's response number 9
There's a far easier way to do this: after you sync your angles, hold down Alt/Opt and select or lasso just the video portions of the clips, and nest those. The audio stays put, but the video moves into the nest, and you can then enable Multicam on the nested sequence.
One of the best things about this is that it circumvents Premiere Pro's totally BS "Render Required Files" nonsense.
I must admit the ALT lasso tip was one of the best features I have seen. Like a revelation when I discovered it some months ago while watching a tutorial about something not related. As far as the "Rendering required files" That was kicking my but for a while doing multicam editing. If you do edit both audio and video in multicam you might find the "Rendering required files" issue. Basically the problem stems from having a lot of cuts to process at the same time both audio and video. 1080P is a huge amount of data when you multiply it by four cameras plus multiple audio cuts and effects ,(audio gain, Deessing etc.) So Pre-rendering the audio by clicking in the main sync timeline and then at the top Click Sequence/Render Audio.This takes care of the issue when you are cutting multiple tracks at once. It is a good practice to work from a main sync sequence and then copy that to a new sequence preserving the main sequence as unchanged. I found the solution is to "render audio" only in the master sync sequence this will then pass through to all subsequent copies that are made "downstream" allowing you to easily clean up anything. If you make a mistake you can always start from the main sync sequence and not lose too much time. Takes a little bit of time to render but once that is done you can cut all tracks video and audio like butter. I have been doing a lot of 1080p multicam editing over this past year and had quite learning curve. Most of the work I do is multicam editing by choice it is much faster for me to edit this way because I am used to working in live events where we need to look at all shots at the same time make a "best choice" and keep rolling. Have fun with it!

My grandsons new Apple refurbed 35g ipad keeps locking up with a black screen amd nothing else. I have reset it many times pressing the home and off buttons together but uit keeps locking up. Help,please!

My grandsons new Apple refurbed 35g ipad keeps locking up with a black screen amd nothing else. I have reset it many times pressing the home and off buttons together but it keeps locking up. Help,please!

Thank you for trying to help. I followed your instructions, it took 6 hours to download, and then said it could not solve the problem (something to do with error 9?). It will have to go back to Apple - its only 3 days since it came out of the package and its very disappointing for him. Looks like I have to hang around in the Apple store in Plymouth all tomorrow until they can fix it, or will change it. Thanks for your help.

AME locking up with new multi-band audio processor in Pr CC

Similar Messages

Maybe you are looking for