AME reboots PC when starting encode of AVI = mpg2-DVD or h.264???

I'm encoding SD avi files for DVD.
Whether I use "export" from Premier, or to the queue for AME, my PC simply reboots.   No error. no warning... nothing.  However; I CAN export to avi, no problem.
The source content is VHS tape transfer using Premier CC which capture in avi.  Sequence setting is the preset for DV-NTSC.
The PC is brand new, purpose-built, Intel i7, 16GB of ram, 512BG Intel SSD, Win7(SP2).
There is no other software installed.  I suspected a faulty mainboard (I got it thru AMAZON - and it had clearly be re-packaged), so I had it replaced with factory sealed mainboard of the same type and model
(Gigabyte GA-Z97X-UD5H), But the exact same problem occurred.
I ran a full suite of Memtest tests (10 repetitions) with no errors from the CPU or RAM.
I completely reformatted the SSD and re-installed Win7 and  Premiere Pro.
Adobe provides NO chat support or phone support for AME or Premiere ...THANKS A LOT ADOBE .
I have to edit the sequences and do some assembling,
I'd appreciate any ideas on this problem, or in the alternative, a way to encode without AME.

Just curious if I posted this in the right area.  Would the Premiere Pro forum be a better choice?
BJBBJB1

Similar Messages

  • AME bogs down when encoding

    I have a fairly edit-intense file that I've been trying to encode (using Adobe Media Encoder) for YouTube. The first part of the video (a little over 5 minutes total length) is pretty straight-forward video and chugs along just fine. Then it hits a section which is heavily edited - a bunch of green screen video with some effects and it understandably slows down. The problem I'm getting is that when it gets through that section to something less intensive, it continues to be VERY slow to render frames. It's like the tough part made it tired and it just doesn't have the energy anymore. I've tried several different output options, all with the same results.
    What's most frustrating is that during editing, I have saved versions of this which did not bring the encoding to a halt. In fact, the most recent successful encoding was making a DVD ISO in Encore which also included an additional video and menu screen. Yet that worked as expected in a reasonable amount of time. What could have changed?
    I started this project and wrote to DVD in CS6. My first attempt at the YouTube output was also CS6. Thinking the upgrade to CC might fix the problem, I upgraded, but it's reacting in the same way.
    I appreciate any help - thanks!

    Now, to make things worse. Since I couldn't figure out the issue, I just let the sequence run. I happened to be at my computer for the last few frames (watching it render in AME's output preview) at roughly the 45 hour mark! I was happy that even though it took forever, at least it was done. But I noticed the progress bar was only about 1/2 way through... and then the video started over! It didn't save the file, it just kept on rendering a second time through.
    How could that be? Is there a "repeat" setting I might have accidentally changed? This has been so frustrating.

  • AME stops responding when second file added to queue

    I'm running CS5 on a 64-bit Windows 7 system.
    Today, AME stops responding whenever I try to add a second file to the encoding/transcoding queue. I can add an .avi or a Premiere project timeline (either exported from Premiere or added straight into AME) but if I try to duplicate that item or add a second version, I instantly see the spinner and it the application goes to "not responding."
    I have no idea where to start looking. Any ideas?
    Thanks for the help.

    I have now done an uninstall and reinstall of the entire CS5 Master Collection suite. At first, the problem seemed to have persisted, or gotten worse.
    AME was able to launch and load, and could get to the point of selecting a Premiere Pro project timeline to import, without issue. However, AME would hang if I dragged an MPEG-2 into the queue or selected a timeline to import, and then quickly go to "not responding."
    I have an watch folder in my AME queue and I thought I'd delete it to see if I could do anything in AME. I was able to delete it without issue. I then tried dragging an MPEG-2 into the queue again and, predictably, it hung, went non-responsive and I killed AME. However, when I re-launched AME the watch folder was again in the queue. So I deleted the folder, exited AME and relaunched it. I was then able to import an After Effects comp and successfully encode it, as well as drag in some small MPEG-2s. Finally I risked importing a small Premiere Pro project timeline and it worked.
    Right now, AME is happily encoding a timeline from an old, large and messy project that gets messier every couple of weeks.
    My guess is that there was something wrong with way one of the files or projects I tried to import earlier and, since AME wasn't getting shut down, the troublesome item was persisting (and the problem possibly compounding) every time I launched AME.

  • Quality problems when exporting mini DV AVI clips CS6 ...

    I'm working with some SD footage that was captured from a Sony miniDV consumer camcorder (using VideoStudio).   Files are stored in .avi format; 720x480; 29.97; PAR .9091; Gspot reports codec dvsd, DVC/DV Video.    My PC is newer with an i7 3930, 32GB, GTX 670, WD Caviar Black RAID 0.   
    When I play the original AVI files on my PC they look ok in Windows Media Player.  If I export a clip or two from PP using the AVI format that resultant file plays/looks ok too -  I can't tell a difference from the original although my wife claimed she could see a minor degradation in the result.   However, if I export to any other format the resultant encoding looks absolutely terrible - particularly where there is motion.   I've tried MPEG-2, MPEG-DVD, MPEG I-Frame, and H.264 formats.  I realize there is a quality loss from encoding and these other formats are more compressed, but the results are absolutely horrible.  
    I cannot play an .avi file natively on my PS3, but I did play all the other encodings natively on my PS3 off a flash drive and they look terrible there too. 
    I took the MPEG-DVD encoding and built a DVD with Encore.  Encore correctly did not transcode again.   Then I played the DVD on my PS3 and same situation - terrible.
    I then took an AVI encoding exported from PP and loaded it into Encore to make another DVD, which obviously transcoded in this case.   When I play the DVD on my PS3, it looks ok.
    What is going wrong here?   Did I miss something on the video settings on export for these other formats?  Or are these results expected? 
    Thanks,
    Jon

    On the workflow notes, I went through those posts that John Smith mentioned, especially the video which I had seen prior.   I had done what was suggested creating a sequence from the clip.  However, PP set the sequence up as progressive.  Is that to be expected?   Or did I miss something here?   Anyway, in the future I will pop over to the Settings panel and sanity check.
    Regarding the Modify->Interpret and determining interlaced vs. progressive, here is a screen shot.   I can see Progressive is grayed out, so I assume that is how to tell it is interlaced, although why doesn't it tell you the field order?  In practical terms, do people just know what they are dealing with from the start in most cases?

  • PE3: Hangs when starting to burn DVD

    Hi
    When burning DVD, at the final stage, after encoding successfully, consistently fails to start to burn. Unable to stop by " Cancel" Have to "end task". When hanging, CPU is spending 50% running PE3.Opening and closing DVD drawer to possibly raise an interrupt didn't help.
    I have searched extensively the various help areas and I think I have done all I can. See below. This is a third of a video which is a mixture of slides and short video clips. The other two work fine. They are all about the same length ( 20 mins). The video is fully rendered.
    Environment
    XP
    Dual core 3G cpu
    3G Ram
    Cleaned up and just defragged C drive, 50% of 160G free, and 50% of 0.5Tb external hard drive.
    All software up to date
    No other activity at all on system
    Tried straight after system restart
    I am aware I could use the AVI route bur when I did this I didn't get the initial menu screen.

    Steve
    Steve
    Thanks again.
    I checked and when I made it before, it was by "Export movie" route to folder as AVI and then reimporting that to Timeline in a new project,which I found somewhere in Help. That route missed off the Menu.But it did work otherwise.If all else fails I will have to stick at that .
    BUT this morning I tried the Burn to Folder option in Burn DVD window(not quite same dialogue as you said) This also hung after about half the time, having done the encoding Ok. Again no error, and couldn't "Cancel" had to end task. And again 50% CPU to Adobe.Looked identical to when trying to do direct to DVD.
    Also when it hung trying to burn directly, the DVD was " being used by PE" as I checked by trying to do things to it from Control panel( format)
    Chris

  • Error when starting Java(TM) ME Platform SDK 3.0

    hey guys, I get this error when starting Java(TM) ME Platform SDK 3.0. When I installed it it installed 'successfully' and then I double clicked the file on the desktop (I'm using Windows Vista 32bit Home premium) and it gave me the following error when saying 'Starting Modules':-------------------------------------------------------------------------------
    Log Session: Sunday, February 13, 2011 1:52:25 PM GMT
    System Info:   Product Version         = Java(TM) ME Platform SDK 3.0
      Operating System        = Windows Vista version 6.0 running on x86
      Java; VM; Vendor        = 1.6.0_23; Java HotSpot(TM) Client VM 19.0-b09; Sun Microsystems Inc.
      Runtime                 = Java(TM) SE Runtime Environment 1.6.0_23-b05
      Java Home               = C:\Program Files\Java\jdk1.6.0_23\jre
      System Locale; Encoding = en_GB (cdctoolbar); Cp1252
      Home Directory          = C:\Users\Molten Ice
      Current Directory       = C:\Program Files\Java\Java_ME_platform_SDK_3.0\bin
      User Directory          = C:\Users\Molten Ice\javame-sdk\toolbar\3.0
      Installation            = C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\javamesdk1
                                C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\ide10
                                C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\java2
                                C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\mobility8
                                C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\profiler2
                                C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\platform9
      Boot & Ext. Classpath   = C:\Program Files\Java\jdk1.6.0_23\jre\lib\resources.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\rt.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\sunrsasign.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\jsse.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\jce.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\charsets.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\modules\jdk.boot.jar;C:\Program Files\Java\jdk1.6.0_23\jre\classes;C:\Program Files\Java\jdk1.6.0_23\jre\lib\ext\dnsns.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\ext\localedata.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\ext\sunjce_provider.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\ext\sunmscapi.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\ext\sunpkcs11.jar
      Application Classpath   = C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\platform9\lib\boot.jar;C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\platform9\lib\org-openide-modules.jar;C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\platform9\lib\org-openide-util.jar;C:\Program Files\Java\jdk1.6.0_23\lib\dt.jar;C:\Program Files\Java\jdk1.6.0_23\lib\tools.jar
      Startup Classpath       = C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\platform9\core\core.jar;C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\platform9\core\org-openide-filesystems.jar;C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\javamesdk1\core\locale\core_cdctoolbar.jar
    WARNING [org.netbeans.core.projects.cache]: Inefficient to include an empty layer in a module: jar:file:/C:/Program%20Files/Java/Java_ME_platform_SDK_3.0/toolbar/javamesdk1/modules/org-netbeans-modules-javame-common.jar!/org/netbeans/modules/javame/common/resources/layer.xml
    WARNING [org.netbeans.core.projects.cache]: Inefficient to include an empty layer in a module: jar:file:/C:/Program%20Files/Java/Java_ME_platform_SDK_3.0/toolbar/javamesdk1/modules/org-netbeans-modules-e2e.jar!/org/netbeans/modules/e2e/layer.xml
    WARNING [org.openide.filesystems.Ordering]: Not all children in Services/MIMEResolver/ marked with the position attribute: [org-netbeans-modules-javame-netmon-data-NetMonDataResolver.xml], but some are: [org-netbeans-modules-java-mime-resolver.xml, org-apache-tools-ant-module-mime-resolver.xml, org-netbeans-modules-editor-settings-storage-mime-resolver.xml, org-netbeans-modules-url-mime-resolver.xml, org-netbeans-modules-pdf-mime-resolver.xml, org-netbeans-modules-jar-mime-resolver.xml, org-netbeans-modules-editor-codetemplates-mime-resolver.xml]
    WARNING [org.openide.filesystems.Ordering]: Not all children in Services/MIMEResolver/ marked with the position attribute: [org-netbeans-modules-javame-netmon-data-NetMonDataResolver.xml], but some are: [org-netbeans-modules-java-mime-resolver.xml, org-apache-tools-ant-module-mime-resolver.xml, org-netbeans-modules-editor-settings-storage-mime-resolver.xml, org-netbeans-modules-url-mime-resolver.xml, org-netbeans-modules-pdf-mime-resolver.xml, org-netbeans-modules-jar-mime-resolver.xml, org-netbeans-modules-editor-codetemplates-mime-resolver.xml]
    [      0]   INFO - ootstrap.PropertyEditorManager - Registering custom property editors
    [    117]   INFO - bootstrap.ObjectGraphProcessor - Consolidating dependencies...
    [    217]   INFO - bootstrap.ObjectGraphProcessor - Consolidated dependencies...
    [    317]   INFO - bootstrap.ObjectGraphProcessor - Calculating order...
    [    417]   INFO - bootstrap.ObjectGraphProcessor - Calculated order
    [    523]   INFO - un.jme.toolkit.bootstrap.Batch - Initializing objects...
    [    627]   INFO - un.jme.toolkit.bootstrap.Batch - Applying I18N
    [    732]   INFO - un.jme.toolkit.bootstrap.Batch - Initialized objects
    [    832]   INFO - un.jme.toolkit.bootstrap.Batch - Calling create() methods...
    [    932]   INFO - un.jme.toolkit.bootstrap.Batch - Calling start() methods...
    [   1032]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
    [   2166]   WARN - mpl.ObjectServerConnectionImpl - Remote object server is not running at service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
    [   2268]   INFO - l.process.GenericProcessRunner - Starting process: C:\Program Files\Java\Java_ME_platform_SDK_3.0/bin/device-manager.exe
    [   3384]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
    [   5476]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
    [   7576]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
    [   9677]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
    [  11777]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
    [  13877]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
    [  15977]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
    [  18077]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
    [  20177]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
    [  22277]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
    [  23379]  ERROR - un.jme.toolkit.bootstrap.Batch - Problem calling start() on DeviceManagerConnection
    java.lang.reflect.InvocationTargetException
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at com.sun.jme.toolkit.bootstrap.Batch.invoke(Unknown Source)
         at com.sun.jme.toolkit.bootstrap.Batch.tryInvoke(Unknown Source)
         at com.sun.jme.toolkit.bootstrap.Batch.startObjects(Unknown Source)
         at org.netbeans.modules.javame.common.container.Module.start(Module.java:21)
         at org.netbeans.modules.javame.common.container.ContainerSupport.startModule(ContainerSupport.java:67)
         at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.getDeviceManagerConnection(DevicemanagerHelper.java:41)
         at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.ensureConnected(DevicemanagerHelper.java:48)
         at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.getDeviceManager(DevicemanagerHelper.java:84)
         at org.netbeans.modules.javame.platform.jme_sdk.autoinstaller.AutoInstaller.ensureDMStarted(AutoInstaller.java:292)
         at org.netbeans.modules.javame.platform.jme_sdk.autoinstaller.AutoInstaller.restored(AutoInstaller.java:63)
         at org.netbeans.core.startup.NbInstaller.loadCode(NbInstaller.java:421)
         at org.netbeans.core.startup.NbInstaller.load(NbInstaller.java:342)
         at org.netbeans.ModuleManager.enable(ModuleManager.java:906)
         at org.netbeans.core.startup.ModuleList.installNew(ModuleList.java:428)
         at org.netbeans.core.startup.ModuleList.trigger(ModuleList.java:364)
         at org.netbeans.core.startup.ModuleSystem.restore(ModuleSystem.java:276)
         at org.netbeans.core.startup.Main.getModuleSystem(Main.java:165)
         at org.netbeans.core.startup.Main.start(Main.java:312)
         at org.netbeans.core.startup.TopThreadGroup.run(TopThreadGroup.java:110)
         at java.lang.Thread.run(Thread.java:662)
    Caused by: java.io.IOException: Failed to retrieve RMIServer stub: javax.naming.ServiceUnavailableException [Root exception is java.rmi.ConnectException: Connection refused to host: 127.0.0.1; nested exception is:
         java.net.ConnectException: Connection refused: connect]
         at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:338)
         at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:248)
         at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.connect(Unknown Source)
         at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.start(Unknown Source)
         ... 24 more
    Caused by: javax.naming.ServiceUnavailableException [Root exception is java.rmi.ConnectException: Connection refused to host: 127.0.0.1; nested exception is:
         java.net.ConnectException: Connection refused: connect]
         at com.sun.jndi.rmi.registry.RegistryContext.lookup(RegistryContext.java:101)
         at com.sun.jndi.toolkit.url.GenericURLContext.lookup(GenericURLContext.java:185)
         at javax.naming.InitialContext.lookup(InitialContext.java:392)
         at javax.management.remote.rmi.RMIConnector.findRMIServerJNDI(RMIConnector.java:1886)
         at javax.management.remote.rmi.RMIConnector.findRMIServer(RMIConnector.java:1856)
         at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:257)
         ... 27 more
    Caused by: java.rmi.ConnectException: Connection refused to host: 127.0.0.1; nested exception is:
         java.net.ConnectException: Connection refused: connect
         at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:601)
         at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:198)
         at sun.rmi.transport.tcp.TCPChannel.newConnection(TCPChannel.java:184)
         at sun.rmi.server.UnicastRef.newCall(UnicastRef.java:322)
         at sun.rmi.registry.RegistryImpl_Stub.lookup(Unknown Source)
         at com.sun.jndi.rmi.registry.RegistryContext.lookup(RegistryContext.java:97)
         ... 32 more
    Caused by: java.net.ConnectException: Connection refused: connect
         at java.net.PlainSocketImpl.socketConnect(Native Method)
         at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
         at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
         at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
         at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
         at java.net.Socket.connect(Socket.java:529)
         at java.net.Socket.connect(Socket.java:478)
         at java.net.Socket.<init>(Socket.java:375)
         at java.net.Socket.<init>(Socket.java:189)
         at sun.rmi.transport.proxy.RMIDirectSocketFactory.createSocket(RMIDirectSocketFactory.java:22)
         at sun.rmi.transport.proxy.RMIMasterSocketFactory.createSocket(RMIMasterSocketFactory.java:128)
         at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:595)
         ... 37 more
    SEVERE [org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper]: Cannot connect to device manager
    java.net.ConnectException: Connection refused: connect
         at java.net.PlainSocketImpl.socketConnect(Native Method)
         at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
         at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
         at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
         at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
         at java.net.Socket.connect(Socket.java:529)
         at java.net.Socket.connect(Socket.java:478)
         at java.net.Socket.<init>(Socket.java:375)
         at java.net.Socket.<init>(Socket.java:189)
         at sun.rmi.transport.proxy.RMIDirectSocketFactory.createSocket(RMIDirectSocketFactory.java:22)
         at sun.rmi.transport.proxy.RMIMasterSocketFactory.createSocket(RMIMasterSocketFactory.java:128)
         at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:595)
    Caused: java.rmi.ConnectException: Connection refused to host: 127.0.0.1; nested exception is:
         java.net.ConnectException: Connection refused: connect
         at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:601)
         at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:198)
         at sun.rmi.transport.tcp.TCPChannel.newConnection(TCPChannel.java:184)
         at sun.rmi.server.UnicastRef.newCall(UnicastRef.java:322)
         at sun.rmi.registry.RegistryImpl_Stub.lookup(Unknown Source)
         at com.sun.jndi.rmi.registry.RegistryContext.lookup(RegistryContext.java:97)
    Caused: javax.naming.ServiceUnavailableException [Root exception is java.rmi.ConnectException: Connection refused to host: 127.0.0.1; nested exception is:
         java.net.ConnectException: Connection refused: connect]
         at com.sun.jndi.rmi.registry.RegistryContext.lookup(RegistryContext.java:101)
         at com.sun.jndi.toolkit.url.GenericURLContext.lookup(GenericURLContext.java:185)
         at javax.naming.InitialContext.lookup(InitialContext.java:392)
         at javax.management.remote.rmi.RMIConnector.findRMIServerJNDI(RMIConnector.java:1886)
         at javax.management.remote.rmi.RMIConnector.findRMIServer(RMIConnector.java:1856)
         at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:257)
    Caused: java.io.IOException: Failed to retrieve RMIServer stub
         at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:338)
         at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:248)
         at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.connect(Unknown Source)
         at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.start(Unknown Source)
    Caused: java.lang.reflect.InvocationTargetException
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at com.sun.jme.toolkit.bootstrap.Batch.invoke(Unknown Source)
         at com.sun.jme.toolkit.bootstrap.Batch.tryInvoke(Unknown Source)
         at com.sun.jme.toolkit.bootstrap.Batch.startObjects(Unknown Source)
         at org.netbeans.modules.javame.common.container.Module.start(Module.java:21)
         at org.netbeans.modules.javame.common.container.ContainerSupport.startModule(ContainerSupport.java:67)
         at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.getDeviceManagerConnection(DevicemanagerHelper.java:41)
         at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.ensureConnected(DevicemanagerHelper.java:48)
    [catch] at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.getDeviceManager(DevicemanagerHelper.java:84)
         at org.netbeans.modules.javame.platform.jme_sdk.autoinstaller.AutoInstaller.ensureDMStarted(AutoInstaller.java:292)
         at org.netbeans.modules.javame.platform.jme_sdk.autoinstaller.AutoInstaller.restored(AutoInstaller.java:63)
         at org.netbeans.core.startup.NbInstaller.loadCode(NbInstaller.java:421)
         at org.netbeans.core.startup.NbInstaller.load(NbInstaller.java:342)
         at org.netbeans.ModuleManager.enable(ModuleManager.java:906)
         at org.netbeans.core.startup.ModuleList.installNew(ModuleList.java:428)
         at org.netbeans.core.startup.ModuleList.trigger(ModuleList.java:364)
         at org.netbeans.core.startup.ModuleSystem.restore(ModuleSystem.java:276)
         at org.netbeans.core.startup.Main.getModuleSystem(Main.java:165)
         at org.netbeans.core.startup.Main.start(Main.java:312)
         at org.netbeans.core.startup.TopThreadGroup.run(TopThreadGroup.java:110)
         at java.lang.Thread.run(Thread.java:662)
    [  23598]   INFO - bootstrap.ObjectGraphProcessor - Consolidating dependencies...
    [  23698]   INFO - bootstrap.ObjectGraphProcessor - Consolidated dependencies...
    [  23798]   INFO - bootstrap.ObjectGraphProcessor - Calculating order...
    [  23898]   INFO - bootstrap.ObjectGraphProcessor - Calculated order
    [  23998]   INFO - un.jme.toolkit.bootstrap.Batch - Initializing objects...
    [  24098]   INFO - un.jme.toolkit.bootstrap.Batch - Applying I18N
    [  24198]   INFO - un.jme.toolkit.bootstrap.Batch - Initialized objects
    [  24298]   INFO - un.jme.toolkit.bootstrap.Batch - Calling create() methods...
    [  24398]   INFO - un.jme.toolkit.bootstrap.Batch - Calling start() methods...
    [  24498]   INFO - un.jme.toolkit.bootstrap.Batch - Objects started
    [  24600]   INFO - bootstrap.ObjectGraphProcessor - Consolidating dependencies...
    [  24700]   INFO - bootstrap.ObjectGraphProcessor - Consolidated dependencies...
    [  24800]   INFO - bootstrap.ObjectGraphProcessor - Calculating order...
    [  24900]   INFO - bootstrap.ObjectGraphProcessor - Calculated order
    [  25000]   INFO - un.jme.toolkit.bootstrap.Batch - Initializing objects...
    [  25100]   INFO - un.jme.toolkit.bootstrap.Batch - Applying I18N
    [  25202]   INFO - un.jme.toolkit.bootstrap.Batch - Initialized objects
    [  25302]   INFO - un.jme.toolkit.bootstrap.Batch - Calling create() methods...
    [  25402]   INFO - un.jme.toolkit.bootstrap.Batch - Calling start() methods...
    [  25502]   INFO - un.jme.toolkit.bootstrap.Batch - Objects started
    [  25602]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
    [  26699]   WARN - mpl.ObjectServerConnectionImpl - Remote object server is not running at service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
    [  26799]   INFO - l.process.GenericProcessRunner - Starting process: C:\Program Files\Java\Java_ME_platform_SDK_3.0/bin/device-manager.exe
    [  27914]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
    [  30005]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
    [  32106]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
    [  34206]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
    [  36306]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
    [  38406]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
    [  40506]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
    [  42607]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
    [  44706]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
    [  46806]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
    SEVERE [org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper]: Cannot connect to device manager
    java.net.ConnectException: Connection refused: connect
         at java.net.PlainSocketImpl.socketConnect(Native Method)
         at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
         at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
         at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
         at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
         at java.net.Socket.connect(Socket.java:529)
         at java.net.Socket.connect(Socket.java:478)
         at java.net.Socket.<init>(Socket.java:375)
         at java.net.Socket.<init>(Socket.java:189)
         at sun.rmi.transport.proxy.RMIDirectSocketFactory.createSocket(RMIDirectSocketFactory.java:22)
         at sun.rmi.transport.proxy.RMIMasterSocketFactory.createSocket(RMIMasterSocketFactory.java:128)
         at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:595)
    Caused: java.rmi.ConnectException: Connection refused to host: 127.0.0.1; nested exception is:
         java.net.ConnectException: Connection refused: connect
         at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:601)
         at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:198)
         at sun.rmi.transport.tcp.TCPChannel.newConnection(TCPChannel.java:184)
         at sun.rmi.server.UnicastRef.newCall(UnicastRef.java:322)
         at sun.rmi.registry.RegistryImpl_Stub.lookup(Unknown Source)
         at com.sun.jndi.rmi.registry.RegistryContext.lookup(RegistryContext.java:97)
    Caused: javax.naming.ServiceUnavailableException [Root exception is java.rmi.ConnectException: Connection refused to host: 127.0.0.1; nested exception is:
         java.net.ConnectException: Connection refused: connect]
         at com.sun.jndi.rmi.registry.RegistryContext.lookup(RegistryContext.java:101)
         at com.sun.jndi.toolkit.url.GenericURLContext.lookup(GenericURLContext.java:185)
         at javax.naming.InitialContext.lookup(InitialContext.java:392)
         at javax.management.remote.rmi.RMIConnector.findRMIServerJNDI(RMIConnector.java:1886)
         at javax.management.remote.rmi.RMIConnector.findRMIServer(RMIConnector.java:1856)
         at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:257)
    Caused: java.io.IOException: Failed to retrieve RMIServer stub
         at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:338)
         at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:248)
         at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.connect(Unknown Source)
         at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.start(Unknown Source)
         at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.lookupMBean(Unknown Source)
         at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.findObject(Unknown Source)
    [catch] at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.openConnection(DevicemanagerHelper.java:53)
         at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.getDeviceManager(DevicemanagerHelper.java:86)
         at org.netbeans.modules.javame.platform.jme_sdk.autoinstaller.AutoInstaller.ensureDMStarted(AutoInstaller.java:292)
         at org.netbeans.modules.javame.platform.jme_sdk.autoinstaller.AutoInstaller.restored(AutoInstaller.java:63)
         at org.netbeans.core.startup.NbInstaller.loadCode(NbInstaller.java:421)
         at org.netbeans.core.startup.NbInstaller.load(NbInstaller.java:342)
         at org.netbeans.ModuleManager.enable(ModuleManager.java:906)
         at org.netbeans.core.startup.ModuleList.installNew(ModuleList.java:428)
         at org.netbeans.core.startup.ModuleList.trigger(ModuleList.java:364)
         at org.netbeans.core.startup.ModuleSystem.restore(ModuleSystem.java:276)
         at org.netbeans.core.startup.Main.getModuleSystem(Main.java:165)
         at org.netbeans.core.startup.Main.start(Main.java:312)
         at org.netbeans.core.startup.TopThreadGroup.run(TopThreadGroup.java:110)
         at java.lang.Thread.run(Thread.java:662)
    [  48018]   INFO - bootstrap.ObjectGraphProcessor - Consolidating dependencies...
    [  48118]   INFO - bootstrap.ObjectGraphProcessor - Consolidated dependencies...
    [  48218]   INFO - bootstrap.ObjectGraphProcessor - Calculating order...
    [  48318]   INFO - bootstrap.ObjectGraphProcessor - Calculated order
    [  48418]   INFO - un.jme.toolkit.bootstrap.Batch - Initializing objects...
    [  48518]   INFO - un.jme.toolkit.bootstrap.Batch - Applying I18N
    [  48618]   INFO - un.jme.toolkit.bootstrap.Batch - Initialized objects
    [  48718]   INFO - un.jme.toolkit.bootstrap.Batch - Calling create() methods...
    [  48818]   INFO - un.jme.toolkit.bootstrap.Batch - Calling start() methods...
    [  48918]   INFO - un.jme.toolkit.bootstrap.Batch - Objects started
    [  49018]   INFO - bootstrap.ObjectGraphPI did install Nokia's SDK with NetBeans and this works perfectly.
    I went through with everything recommended here: http://blogs.sun.com/javamesdk/entry/first_aid_when_emulator_doesn
    But nothing worked.
    Any help appreciated!
    Thanks.

    Note: This thread was originally posted in the [Sun Java Wireless Toolkit|http://forums.sun.com/forum.jspa?forumID=82] forum, but moved to this forum for closer topic alignment.

  • Doesn't start when starting as administrator. Error Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system.

    Update firefox, it asked me to update flash, I tried to update flash but it said I had to close firefox. A box came up and said the Flash install would continue when I closed firefox. I closed all firefox windows and no update of flash occurred. I tried relaunching firefox but got the "Doesn't start when starting as administrator. Error Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system." message. I rebooted the system, no improvement. I tried to run firefox as administrator and got the same message. Either I find a fix or I won't be able to use firefox and will have to go back to ie.

    -> press '''CTRL''' + '''SHIFT''' + '''ESC''' to Open Task Manager -> Processes tab -> right-click '''firefox.exe''' and click '''End Process Tree''' -> close Task Manager
    Troubleshooting extensions and themes
    * https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
    Troubleshooting plugins
    * https://support.mozilla.com/en-US/kb/Troubleshooting%20plugins
    Check and tell if its working.

  • Unable to create the temporary folder. Error 183 when starting Distiller

    New information discovered - see end of message!
    Full error message is (window title is Acrobat Distiller):
    "Unable to create the temporary folder
    Error: 183 - cannot create a file when that file already exists."
    I have no idea what file or what folder it is referring to. This is on an x86 Vista notebook and the message comes up when starting the notebook and also if you manually start Distiller 8. Updating did not help, nor did turning off the UAC, or running Distiller as Administrator. In the latter case, Distiller will open correctly, but the next time you need to use it, it fails. With the UAC turned off, the behavior is for it to show the Distiller window for a fraction of a second and close immediately. I also gave the user full rights to the C:\Program Files\Adobe folder and lower. Made no difference.
    Coincidental with this is that the PDFMOfficeAddIn.dll add-in will not enable in Word - when it is checked, and I hit OK, I get the message:
    "The connected state of Office Add-Ins registered in HKEY_LOCAL_MACHINE cannot be changed."
    All of this is going on when logged in as an administrator. I have seen folks post about this issue, but no answers that actually fiux the problem, just suggest what I have already tried. Anyone seen this one?
    The user is highly mobile, so I am not going to have a chance to work on her computer again until next week.
    NEW INFO
    I tried removing and reinstalling as administrator and the problem remains. However while trying to troubleshoot, I discovered some more details.
    The message is being thrown when acrotray.exe is started as a process in HKLM\Software\Microsoft\Windows\Current Control Set\Run and then tries to run acrodist.exe (which fails, BTW). If I don't let it run there and run acrotray,exe as administrator, then acrodist.exe runs as a process without an error. Additionally, stopping it from running in the registry, and then starting MS Word, the Acrobat add-in does load and even though there is an error thown, it still creates the PDF! I have other Vista 32 notebooks running various Acrobat versions with no problems.
    Another key thing I found out is that Acrobat started throwing the error after an HP Scanjet 8400 and its software were installed. I tried explicitly giving the user (already an administrator) full rights to the Acrobat, HP and Read IRIS directories. Did not help the problem. I have to think that there is some interaction there, but sure don't know what it is.

    what i did to eliminate that error message, i don't think it eliminated th
    e problem but now i can reboot and log in OK, was 2 things:
    i went into my system registry and unchecked to start at startup and then disavled it.
    i also had to go to each adobe icon, right click, go to properites, and than make all selections set to be administator.

  • I keep getting the error: "Menu Encoding Error... need to stop burning process" when I attempt to burn a DVD

    Very frustrating... I'm trying to burn a DVD and I've done it about 100 times before.  I've checked the mapping for errors and found none.  When I attempt to burn a DVD, the error mentioned above appears after a few minutes.  I've tried to update all software, restart the computer, and use other DVRs.  Any adivice would be most helpful.  Thanks in advance!

    Hi
    To be able to help we need more exact information and that You try out every suggestion as precise as possibly.
    First step is as always - separate encoding from burn-process - By Save as a DiskImage from File menu in iDVD (as suggested by Old Toad)
    If problem persists in encoding part then
    • iDVD got a corrupted pref file - very common problem
    • Space on Start-Up (Mac OS) hard disk get's too low to be able to store the temp. files from iDVD and Mac OS (can not be stored elsewhere)
    • Material feed into iDVD - can not be digested as strange video codecs and audio files in .mp3 .wma and other exotic formats.
    iDVD pref file - to find out if this is the problem - Easiest and most secure way is to - Create a new User-account and log into this. Re-try iDVD - If it now works OK then the problem is very close to 100% in the pref file. Either do Your work in the new Account or go back and trash the old pref file.
    Space on Start-Up HD - I never go under 25Gb to let iDVD and Mac OS run OK
    Material - Here You need to supply specific information
    • Video - from what Camera - in what codec - If You can open a video file in QuickTime-Player then here open Inspector and read Video format/Codec: nnnnnnnn, size and frame rate - and tell us
    • Audio - All audio I use is in .aiff 16-bit 48kHz (as from my miniDV Camera or 44.1 kHz as from Audio-CDs all other is converted to this. iTunes is even more problematic. Here I collect all needed audio into a new PlayList and this I BURN out as a standard Audio-CD (.aiff) (never .mp3) and in my movie projects I use the files from this CD.
    Yours just trying and Guessing Bengt W

  • Errors when starting tomcat5.5

    Errors when starting tomcat5.5
    I found below errors message when starting tomcat5.5 every time, does anyone know what cause it?
    Thanks in advance.
    JDK 1.5.0 & Struts 1.2 were installed on my machine, running on win XP home edition.
    validation.xml file is here:
    <?xml version="1.0" encoding="iso-8859-1"?>
    <!DOCTYPE form-validation PUBLIC
              "-//Apache Software Foundation//DTD Commons Validator Rules Configuration 1.1.3//EN"
              "http://jakarta.apache.org/commons/dtds/validator_1_1_3.dtd">
    <form-validation>
         <formset>            
              <form name="loginFormBean">
                     <field property="userId" depends="required">
                       <msg name="required" key="loginFormBean.error.userId.missing"/>     
                     </field> 
                     <field property="password" depends="required">
                       <msg name="required" key="loginFormBean.error.password.missing"/>     
                     </field> 
              </form>       
         </formset>  
    </form-validation>
    Error message:
    INFO: Loading validation rules file from '/WEB-INF/validation.xml'
    Nov 18, 2005 9:26:37 AM org.apache.commons.digester.Digester error
    SEVERE: Parse Error at line 39 column 17: Document is invalid: no grammar found.
    org.xml.sax.SAXParseException: Document is invalid: no grammar found.
         at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.createSAXParseException(
    ErrorHandlerWrapper.java:236)
         at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.error(ErrorHandlerWrapper.
    java:172)
         at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(XMLErrorReporter.
    java:382)
         at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(XMLErrorReporter.
    java:316)
         at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.scanStartElement(
    XMLNSDocumentScannerImpl.java:177)
         at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl$NSContentDispatcher.
    scanRootElementHook(XMLNSDocumentScannerImpl.java:779)
         at com.sun.org.apache.xerces.internal.impl.
    XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(XMLDocumentFragmentScannerImpl.
    java:1794)
         at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(
    XMLDocumentFragmentScannerImpl.java:368)
         at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.
    java:834)
         at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.
    java:764)
         at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:148)
         at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse(AbstractSAXParser.java
    :1242)
         at org.apache.commons.digester.Digester.parse(Digester.java:1591)
         at org.apache.commons.validator.ValidatorResources.<init>(ValidatorResources.java:159)
         at org.apache.struts.validator.ValidatorPlugIn.initResources(ValidatorPlugIn.java:237)
         at org.apache.struts.validator.ValidatorPlugIn.init(ValidatorPlugIn.java:162)
         at org.apache.struts.action.ActionServlet.initModulePlugIns(ActionServlet.java:869)
         at org.apache.struts.action.ActionServlet.init(ActionServlet.java:336)
         at javax.servlet.GenericServlet.init(GenericServlet.java:211)
         at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1091)
         at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:925)
         at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3857)
         at org.apache.catalina.core.StandardContext.start(StandardContext.java:4118)
         at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:759)
         at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:739)
         at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:524)
         at org.apache.catalina.startup.HostConfig.deployDirectory(HostConfig.java:894)
         at org.apache.catalina.startup.HostConfig.deployDirectories(HostConfig.java:857)
         at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:475)
         at org.apache.catalina.startup.HostConfig.start(HostConfig.java:1102)
         at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:311)
         at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119)
         at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1020)
         at org.apache.catalina.core.StandardHost.start(StandardHost.java:718)
         at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1012)
         at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:442)
         at org.apache.catalina.core.StandardService.start(StandardService.java:450)
         at org.apache.catalina.core.StandardServer.start(StandardServer.java:683)
         at org.apache.catalina.startup.Catalina.start(Catalina.java:537)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:271)
         at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:409)
    Nov 18, 2005 9:26:37 AM org.apache.commons.digester.Digester error
    SEVERE: Parse Error at line 39 column 17: Document root element "form-validation", must match DOCTYPE
    root "null".
    org.xml.sax.SAXParseException: Document root element "form-validation", must match DOCTYPE root "
    null".
         at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.createSAXParseException(
    ErrorHandlerWrapper.java:236)
         at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.error(ErrorHandlerWrapper.
    java:172)
         at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(XMLErrorReporter.
    java:382)
         at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(XMLErrorReporter.
    java:316)
         at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.scanStartElement(
    XMLNSDocumentScannerImpl.java:183)
         at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl$NSContentDispatcher.
    scanRootElementHook(XMLNSDocumentScannerImpl.java:779)
         at com.sun.org.apache.xerces.internal.impl.
    XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(XMLDocumentFragmentScannerImpl.
    java:1794)
         at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(
    XMLDocumentFragmentScannerImpl.java:368)
         at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.
    java:834)
         at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.
    java:764)
         at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:148)
         at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse(AbstractSAXParser.java
    :1242)
         at org.apache.commons.digester.Digester.parse(Digester.java:1591)
         at org.apache.commons.validator.ValidatorResources.<init>(ValidatorResources.java:159)
         at org.apache.struts.validator.ValidatorPlugIn.initResources(ValidatorPlugIn.java:237)
         at org.apache.struts.validator.ValidatorPlugIn.init(ValidatorPlugIn.java:162)
         at org.apache.struts.action.ActionServlet.initModulePlugIns(ActionServlet.java:869)
         at org.apache.struts.action.ActionServlet.init(ActionServlet.java:336)
         at javax.servlet.GenericServlet.init(GenericServlet.java:211)
         at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1091)
         at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:925)
         at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3857)
         at org.apache.catalina.core.StandardContext.start(StandardContext.java:4118)
         at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:759)
         at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:739)
         at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:524)
         at org.apache.catalina.startup.HostConfig.deployDirectory(HostConfig.java:894)
         at org.apache.catalina.startup.HostConfig.deployDirectories(HostConfig.java:857)
         at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:475)
         at org.apache.catalina.startup.HostConfig.start(HostConfig.java:1102)
         at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:311)
         at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119)
         at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1020)
         at org.apache.catalina.core.StandardHost.start(StandardHost.java:718)
         at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1012)
         at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:442)
         at org.apache.catalina.core.StandardService.start(StandardService.java:450)
         at org.apache.catalina.core.StandardServer.start(StandardServer.java:683)
         at org.apache.catalina.startup.Catalina.start(Catalina.java:537)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:271)
         at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:409)

    I have not done anything myself, but our desktops do have group policy settings and software/updates do get downloaded sometimes.

  • When starting iTunes I always get the message "Do you want the application"... My firewall is on and incoming connections are allowed

    When starting Itunes the following message appears every thime:
    Do you want the application "iTunes.app" to accept incoming network connections?
    I always click on Allow, but it doesn't help.
    I'm not using the root user to work on my mac and turned the firewall on.
    As mentioned on a website I already removed the /Library/Preferences/com.apple.alf.plist file, but it didn't help.

    Found the solution:
    I checked iTunes by executing the following command in a terminal window:
    codesign -vvv /Applications/iTunes.app
    I reinstalled iTunes because my result was different from the expected output:
    /Applications/iTunes.app/: valid on disk
    /Applications/iTunes.app/: satisfies its Designated Requirement
    I logged in as a root user.
    In /Library/Preferences/ I deleted
    - com.apple.alf.plist
    - com.apple.alf.plist.lockfile
    (although I could not empty the trash bin due to the lockfile, you can after a reboot)
    I clicked on the iTunes.app application and pressed command+i
    In that window I allowed everyone to read/write
    I've moved the application to the trash bin.
    After rebooting the mac and logging in as a root user, I could empty the trash bin.
    I made sure that my firewall was started again, and downloaded the latest version of
    iTunes (currently 10.5.1).
    Launching iTunes doesn't give any warnings anymore because it's auto-trusted by mac.
    Hope this helps others.

  • Firefox does not appear on screen when started from the start menu, but task manager says the process is running

    Firefox does not appear on screen when started from the start menu or the shortcuts, but task manager says the process is running.

    No - I get the message basically saying "Can't run program while Firefox is running. Please close down Firefox & try again".
    I rebooted my computer and it all works now - but that's weird it was happening before. Kinda weirded out that it happened at all.
    To avoid that happening again, I still wanna know what to do to avoid it or fix it for next time. Thanks

  • 240 Gt with Cuda enabled and I can't get AME (6.0.1) to encode the file

    I have 240 Gt with Cuda enabled and I can't get AME (6.0.1) to encode the file, when I switch to software only it will encode. Any help on how to get to encode in Cuda mode? 

    That is not a card that any Adobe software will use for CUDA acceleration.
    See the system requirements for Premiere Pro CS6:
    http://www.adobe.com/products/premiere/tech-specs.html

  • Start encoding on startup?

    I think this question boils down to: what is the window name of FMLE 3 in Vista?
    I want to setup a machine whose sole purpose is to live encode a single camera input. No problem. But I want it to automatically start encoding when the computer boots up, such as after a power outage.
    I have the Vista machine setup to automatically log in. I have a .vbs that opens FMLE. But the FMLE window does not receive focus so the scripted {Enter} doesn't start the encoder.
    My script is below (essentially from http://forum.egypt.com/enforum/articles-f176/how-programmatically-control-flash-media-enco der-34.html)
    Option Explicit
    Set objShell = WScript.CreateObject("WScript.Shell")
    objShell.Run """C:\Program Files (x86)\Adobe\Flash Media Live Encoder.exe"" /p ""C:\script\camera.xml""", 9
    WScript.Sleep 8000
    objShell.AppActivate "Adobe Flash Media Live Encoder 3"
    objShell.SendKeys "{ENTER}"
    The {ENTER} doesn't do anything since the FMLE window isn't activated.
    Oh, and here is another public request to provide live HD support for the BlackMagic Intensity Pro card!

    Nevermind.
    The window name is "Adobe Media Flash Live Encoder". I had tried that before with no luck but it is magically working now.
    I'm leaving this thread up in case anyone can use the information.

  • Acrobat 7 crashes when started

    Hi,
    Before system restore (Windows XP), Acrobat 7 had been working correctly for the past 2-3 years. I had to restore my system back and, afterwards, Acrobat crashes when started. No significant error message reported. I've uninstalled and reinstalled Acrobat but still crashes when started. I've reinstalled updates and still crashes. I've repeated the above procedure (uninstall/reinstall/update) a number of times but Acrobat still crashes when started. BTW I managed to "preserve my registration" since I was reinstalling Acrobat on same computer. So, what's going on? Need help to resolve this problem.

    Hi pelletie,
    Please try the following basic troubleshooting steps :
    > Remove Acrobat by using the Acrobat Cleaner tool ( Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs )
    > Disable all Non-Microsoft Startup Services. (Ref : http://helpx.adobe.com/x-productkb/global/disable-startup-items-services-windows.html )
    > Disable all the Antivirus softwares like CA, Norton,Mc Afee etc. temporarily from the computer.
    Reboot and try installing and check.
    Regards,
    Rave

Maybe you are looking for

  • Changing my Apple ID - what happens to my iTunes purchases

    I am getting rid of an old email account that is by default became my Apple ID (and username for the iTunes/App store). Will my purchases from the App store and iTunes get wiped out from my devices? 

  • Playing video from MacBook Pro to TV (Like iPod)

    Hi, I have an iPod Video, with the cables that I can plug from the 3.5mm jack to the a/v ports on my tv and play video on my iPod... I'm just wondering if there's anyway to just use this cable to plug from my MacBook Pro straight to my TV a/v ports a

  • Need to see raw thumbnails for Canon 5D MkIII

    Using Snow Leopard 10.6.8 - I want to stay with this version of the OS!! All cameras up until the new Canon 5D MkIII were showing thumbnails images of RAW photos in the FINDER. Now there is generic icon and no thumbnail. I need to use the finder for

  • Migrating Security In Oracle BI 11g - Project Amelia

    We'd like to introduce an open source project that assists with the migration of basic security from an OBI 11g (FMW) source environment to a target environment. The project generates a WLST script that executes a security artifact migration process.

  • Downloaded and installed Flash Bios and for some reason an error occured, not computer wont boot!

    http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=136412... THeres what i downloaded, shortly after i tried to restart my comp but it was all frozen. I used the button to turn it off and when i turn it back