AME will not update to the new release
AME will not update to the new release. Tried from the help menu in both AME and Premiere. It Fails each time I try. Is this a known issue. I was not able to update AE or Premiere from the CC app manager. I had to update those both from the update item in the help menus of each program. What is going on?
There are two steps in patching via creative cloud or from within the application.
1. download the patch
2 apply the patch
Which stage failed for you?
I did run into download issue yesterday where CC tried to download patches for a few apps at the same time and it failed to download. I suspect the servers that patches reside on were busy. When I tried it a few hours later, it worked.
You can download the manual patchers from these locations:
http://www.adobe.com/support/downloads/product.jsp?product=160&platform=Macintosh
http://www.adobe.com/support/downloads/product.jsp?product=160&platform=Windows
Similar Messages
-
I have the iPhone 5s. I synced it with my Mac and got all the old apps from my old phone. I was not able to update any of the apps on the old phone and they will not update on the new iPhone 5s either! What can I do?
Hey there rmflint,
It sounds like you are wanting to update the Apps that were synced over from your computer to your new iPhone 5s. If you are clicking Updates in the App Store in the bottom right corner, would you mind clarifying what happens when you are trying to update them?
App Store at a glance
http://help.apple.com/iphone/7/#/iph3dfd8c19
Thank you for using Apple Support Communities.
Take care,
Sterling -
TS3988 my iphone will not update to the new email and password
my iphone will not update with the new email and password
Is your phone signed into an old iCloud ID of yours in Settings>iCloud?
-
HT4623 My iphone 4 will not update to the new ios 6. My husbands phone did update.
My iphone 4 will not update to ios6. It keeps saying there is an error. My husband has the same phone purchased at thesame time and his updated just fine.
Same thing, but even worse because there also is not enough space to do the restore. I think I am screwed and lost everything. I HATE these updates, seems like there are always major issues!
-
Apple TV will not update to the new credit card that is on file with I tunes. Help please
Had to update the credit card on my itunes account. I did and this was done correctly. But my apple TV won't update to the new credit card. I have rebooted, have downloaded the latest software. so therefore I am unable to purchase any movies, etc.
Have you tried restoring?
-
Since the new iTouch has come out I do not get any more updates to my OS or apps. When connected to iTunes to update OS I am told my software is up to date. My OS is 4.1.3. Do I have to get a new iTouch? I shouldn't have too.
Connect the iPod to your computer and update via iTunes
iTunes 10 for Windows: Update and restore software on iPod, iPhone, or iPad
A 2G to 4.2.1. Requires iTunes version 10.X. That requires a Mac with OSX 10.5.8 or later. With 1OSX 10.4.11 you can only go to iTunes 9.X which gets you as high as iOS 4.1
A 3G to 5.1.1 Requires iTunes version 10.5 or later
A 4G to 6 Requires iTunes version 10.7 or later. That requires a Mac with OSX 10.6.8 or later
Identifying iPod models -
Update for iOS 7 locked up my iphone 5
You need to connect your iPhone to a computer and launch iTunes to restore the device.
If you can restore, tap Settings > General > About
Make sure Available indicates at least 3GB. -
My safari will not open with the new iphone update
my safari will not open with the new iphone update...help
Hi Robin,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
I would first suggest you restart your iPhone to see if the issue persists.
iOS: Connecting to Wi-Fi
http://support.apple.com/kb/HT5569?viewlocale=en_US
Cheers,
- Judy -
Updated to IOS6 and now my apps will not update on the Ipad2. I have to delete them and then re-install. But I have several hundred apps and this is cumbersome. Seems the new software is too buggy. I am telling people not to update software yet.
Basic troubleshooting from the Users Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
-
My iPhone blacked out, and will not turn on. I did not update to the new software! So what is my Apple iPhone 5s problem?
A lot of issues with iPhones lately, maybe apple has an issue developing and implementing their inovations.Hi InUtero,
Welcome to the Apple Support Communities!
I can understand your frustration if your iPhone is not turning on as expected. The first thing I would suggest in this situation is a reset. Please use the following article for instructions on how to reset your iPhone. Please be sure to let me know if you need further assistance.
Turn your iOS device off and on (restart) and reset
Have a great day,
Joe -
I was running KeyPassFox with Firefox 8.0.1, but the plugin does not work in the new release (9) . Is there a way to restore my previous version with all of my bookmarks intact? I do not mind if I have to restore the plugins myself.
The plugin shows on the list as enabled and functioning, yet the tool does not show on the toolbar. It would appear that I need to restore the previous version of Firefox and wait until a newer release of the plugin is available before upgrading the browser.I copied the iTunes file from the external drive and it's in both places. I thought all I would need is the iTunes program (which I downloaded to new computer) and my iTunes library file. There must be something else that's missing. My iTunes library looks the same on the new computer as it does when I open it on the external drive. If I click on an iTunes library song from my new computer, it will only play if I have the external drive plugged in.
My back-up drive is a mess. I have multiple copies of music, video, photo, and document files and I don't know how that happened. ={ Obviously, I don't know how to back up stuff properly and there are back-up files extending over a 6- to 8-year period. I think all I did was just drag and drop the main folders from the back-up drive to the same main folders on the C: drive. Also (and I'm kind of fuzzy on this) Windows used to automatically save music files in a folder within my document files (which makes no sense to me). As my Jewish friends would say, "Oy Vey!" -
Itunes will not update to a newer version.
Itunes will not update to a newer version. The error received sates an older version could not be removed.
The error is specifically an older version of Itunes could not be removed.
Many thanks, alex. We'll first try the iTunes variation of my standard instructions, then.
Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly now?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.) -
I can not update to the new OS x Mountain Lion. I get an error that says it has timed out then "102". WHy can't I get it update??
Thanks for your help.Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
Documents that are park in FBV0 do not update with the new user name when
Hi,
I need to find out why documents that are park in FBV0 do not update with the new user name when any changes are made. Also when we park using MIR7 and make changes to the documents at a later time the document updates with the new users name.
Requesting you to please suggest what could be the reason.
Earliest reply will be highly appreciated,
With regards,
RjHi,
I have checked this in system. I posted one Parked invoice using T.code FV60 and there i appeared my name because i created. But after some time one of my collegue changed the reference and text field with his login i.d. But still in the invoice it is showing as my name whereas if we go to the environmnet, there in the changes we can see what are the changes done and it is appearing my collegues user i.d. But in the main invoice it is still appearing my name.
Regards,
Rj. -
Folder Redirection did not update to the new server
hello guys, I had migrated quite some time ago to a new server.
I thought everything works fine, basically the server functionality DNS, Replication and other stuff works fine.
But I notice that some of the workstation did not actually update its folder redirection to the new server.
Their desktop and my documents still points to the old server.
So their offline files, is becoming larger and larger.
I have some workaround but it's a lot of work. Question is, why those Win 7 workstation folder redirection did not update to the new server.
What should be the best practice? During the migration process from the old server to the new server, all workstation should be turned on?
Or any tools to update those workstation to the new server without losing their files?
Basically, just editing the registry to point to the new server will help. But it means losing their current files and whatever old stuff that is on the server will be the one that will be shown on their desktop and documents.
any inputs is greatly appreciated.
Every second counts..make use of it. Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
IT Stuff Quick BytesHi biswajeetpattnaik, before migration it was Windows 2003.
Then I introduce Windows 2008.
Then I introduce a new Windows 2012.
Now Windows 2012 is the main DC.
Actually, everything is under control right now. As what I said on my first post, I manage to do some work around.
The only question I have on mind, is how on earth this thing happen.
I was assuming, that the workstation will be able to point to the new server, without any glitch since everything is working fine.
And the GPO was applying on the workstation. If I type gpresult /v on the workstation is it being applied. Even if I run GP Modelling it is also shows on the result that the folder redirection is being applied.
But to my surprise the folder redirection still points to old server, if I have not discovered it then it would be difficult if some files will get lost.
Thanks for your reply.
Every second counts..make use of it. Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
IT Stuff Quick Bytes
Maybe you are looking for
-
How do I make a new album in iPhoto for iPad?
Maybe I'm missing something obvious but I can't figure out how to make a new album or event in iPhoto. Is there a key somewhere?
-
I am using iMovie 09 with a Canon HFS100 vid cam. Movies download fine, edited flawlessly with iMovie, and converted to iDVD. I burned the DVD. But when I play the disk on my home DVD player to a wide screen Sony HD 1080 TV it cuts off the edges of t
-
At bottom of my screen where desktop Icons are I have a picture of a key and like soundwaves and a red circle with an x in it. When this comes on I can't open a lot of my programs. I am a real novice and am not sure what to do.
-
Hr report category custom with from, to date and current period
I have created custom hr report category of type 'Payroll report category'. But it showing from and to date like it showing in 'master data infotype'. How to add that functionality to 'Payroll report category' custom report. thank you
-
Set File Open dialog path in Acrobat
Hi forum, Is there a way to set the path for the File Open dialog that shows in Acrobat? The situation I have is that the navigation up and down folders to Watermarks and files to be inserted is a painful process. I would like to add buttons to the a