Amending the mic upper lower limits at the time of RR

Hi, Please advise how to change the upper lower limit of the mic during resultts recording? Also advise how to cancel the recorded values of the results recording so that the lot status becomes REL? Can we change REL to CRTD status. Thank you every one supporting the beginners.

please advise how to change the upper lower limit of the mic during resultts recording?
Its really not possible
Also advise how to cancel the recorded values of the results recording so that the lot status becomes REL?
You can not cancel but change the values .This is possible if you declare all char as "Long term " char in control indicator.
This will give status LTIN to char which allows you to change the RR values at any times
Can we change REL to CRTD status.
In QA02-->click on "Reset"-->save -->this will change status from REL to CRTD.
but this is only possible when UD is not taken

Similar Messages

I need help resolving the issue of all channels being "clipped" by the (high and low limits) on the AI-Config sub-vi

No matter what values I put in the corresponding channel index, all channels appear to be using the 'first' index of the limit cluster. I am using a PCI-6110E 5Ms board and LabVIEW 5.0. Has anyone else encountered this problem?

If you want to have different input limits for the different channels, you need to make sure the channels are listed in separate Channel indexes as well. For example, if your channel array index 0 reads "0:7", then channels 0 through 7 will all use the input limit settings in the input limit array's index 0.
Instead, enter "0" in Channel Array index 0,
"1" in Channel Array index 1, etc.

Define upper/lower limits for shipment cost condition

Hi people, help please!
How can I define upper/lower limit for shipment cost conditions?.
The transaction TK11 has the functionality for upper/lower limits, but I can't find how to define it in customizing.
I follow the path Logistic Execution>Transportation>Pricing>Pricing Control>Define Condition Types, but is not like the transaction for pricing elements in condition types for sales.
How can I do it?
Regards.

The problem is on the class condition import limits.
I cant customize upper and lower prices for the shipment cost class condition and i cant find how define it or what else can I do.
The customizing transaction for shipment cost lass condition is not like sales price class condition, please look this:
For the shipment cost class condition follow the path SPRO>Logistic Execution>Transportation>Shipment Cost>Pricing>Pricing Control>Define Condition Types.
For the sales price class condition follow the path SPRO>Sales and Distribution>Basic Function>Pricing>Pricing Control>Define Condition Types, and take a look in Define upper/lower limits for conditions.
So then, when I go to functional transaction VK11 for the sales price condition y cant assign an import out of the limits defined. I need the same for shipment cost condition, transaction TK11, but I cant find where define the limits, as result, user can load any import without limits.
I hope the explanation is useful.

Generic delta - upper & lower limits

Can someone explain the upper & lower limits in generic delta for all the 3 delta-fields - time-stamp, calday & num.pointer with examples?
Points guaranteed for clear illustrations.
Regards,
R.Ravi

Ravi,
The detailed illustration has given below for all the delta mechanisms in Generic in a simpler way to understand... Please go through....
1. If delta field is Date (Record Create Date or change date), then use Upper Limit of 1 day. This will load Delta in BW as of yesterday. Leave Lower limit blank.
2. If delta field is Time Stamp, then use Upper Limit of equal to 1800 Seconds (30 minutes). This will load Delta in BW as of 30 minutes old. Leave Lower limit blank.
3. If delta field is a Numeric Pointer i.e. generated record # like in GLPCA table, then use Lower Limit. Use count 10-100. Leave upper limit blank. If value 10 is used then last 10 records will be loaded again. If a record is created when load was running, those records may get lost. To prevent this situation, lower limit can be used to backup the starting sequence number. This may result in some records being processed more than once.
For more information you can access to:
http://help.sap.com/saphelp_nw2004s/helpdata/en/3f/548c9ec754ee4d90188a4f108e0121/frameset.htm
COPA timestamps vs Generic timestamps
Re: process chains/partitioning in modeling
Hope it helps...
Assign Points if it helps...
Regards,
Gattu

Condition type upper lower limits

Hello Experts,
As we know, condition types can be set upper and lower limits.
Lets say a condition type has 3 scales : 2% , 3% , 4% for discount, for example.
And if the lower and upper limits are : 0% , 5% respectively, i do not see how effective these limits are.
I mean, the condition will not derive a value for 0% or 5%. If the value is 0%, there is nothing in the scale matching 0% also.
So, i do not understand what is the use of the upper and lower limit when the limits are not found in the scales.
regards
Tom

Hi,
The lower and upper limit does not have a significance, when you want only certain specific percentages as discounts. However when you want to provide a range of allowed percentage discount, then the limits are meaningful; e.g. if anything from 10% to 20% discount is allowed, you have to maintain 20% as lower limit and 10% as upper limit as discounts are negative; else you may get error message as "10.000 exceeds the limit 20.000 in the condition record".
Kindly award points if you find the information useful.
Thanks & Regards,

Why is the video in the preview af lower quality than the original video?

I have a question about the quality of the video seen in the preview. This is not as good as the original and also not as good as the original video seen with fe mediaplayer.
I already read some similar discussions and I have tried some things:
Starting a new project with other settings (PAL HD 1080i, 25fps), this does not help.
Rendering the video if necessary, this does also not help.
Some information:
The video's are from a PanasonicHDC-SDT750 full HD camera. Setting 1920HA.
Output files are MPEG imagesize 1920x1080, 25 fps, 48 kHz
Computer: Inte(R)l core (TM) i7-3632QM CPU 2.20 GHz 8 Gb RAM
AMD High definition audio devise
I hope this information is enough to help me, any help is surely appreciated.

carla68
Thanks for the follow up. Let us go through the check list to make sure what you are seeing should be the best possible
1. Project preset....Based on the Panasonic HA setting, the camera should be expected to be recording 1080i (in your case, 1920 x 1080 @25 interlaced frames per second). Either you (manually) or the project (automatically) should be setting the project preset to match those video properties, using
PAL
AVCHD
Full 1080i25
When you import that source into the Expert workspace and drag it to the Timeline, there should be no colored line over its content indicating that the file needs to be Timeline rendered to get the best possible preview. In fact, with no colored line, if you press Render, you will get file playback and not Timeline render.
Are we OK on this so far.
2. Right click the Edit area monitor, select Playback Quality, and then compare the set for Automatic versus Highest.
3. Go to Edit Menu/Preferences/General and the option there
"Timeline render quality (valid for HD projects)" and determine if it is set for "High quality, Slow Speed". If not, set it to that choice.
4. The bitrate for your source is 17 Mbps. If you have exported
Publish+Share
Computer
MPEG2
with Presets = MPEG2 1920 x 1080i25 High Quality
you should be OK bitrate wise since the defaults for the preset are
Minimum 18 Mbps
Target 25 Mbps
Maximum 30 Mbps
Have you looked at the export of
Publish+Share
Computer
AVCHD
with Presets = MP4 - H.264 1920 x 1080p25?
5. Is your computer's video card/graphics card driver version up to date according to the web site of the manufacturer of the card?
Please review and consider the above.
Thank you.
ATR

Microphone on 2011 iMac 21.5 i5 not working. It will not pick up any other sound, except when I scratch near the mic or tap the frame. If I wanted to replace the mic, is it part of the camera module?

I have tried things like, resetting PRAM, making sure internal mic is selected, etc. It is just really odd that it only picks up scratching and tapping of the iMac frame. I can clap and yell, but it will not even pick that up. I don't know what else to do

patrickfromnew brockton wrote:
I should get it there somehow. Good idea though. No other ideas on actually fixing/solving it myself?
Do a Google search for your model iMac for take apart step by step instructions. Then do further research on the iFixit website as well as YouTube's "How to" tutorials.
http://support.apple.com/kb/HT1758 How to identify iMac models
http://support.apple.com/manuals User & DIY (Do-It-Yourself) Manuals

My macpro gets very hot on the underside upper left is it the fan and how do I test it

My Mac pro has started to get very hot when I am using on my knee. It gets hot on the upper left and only when I am viewing a film. Seems ok when writting docs etc.

Also try an SMC reset
SMC Reset
http://support.apple.com/kb/HT3964

I have an iPhone 6, i bhouth one month ago and Now i Want to talking using the earphone but i cant because the mic is not working, but the earphone is good i used in other iPhone and i got to talk normaly, the problem is on device or configuration

H

Hello JD_NINJA,
Thanks for using Apple Support Communities.
Error 9006 when restoring your iOS device indicates that there is security software on your computer which is preventing connection to the Apple server or your device. To troubleshoot this issue please follow the directions below.
Check your security software
Related errors: 2, 4, 6, 9, 1611, 9006. Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
Get help with iOS update and restore errors - Apple Support
When restoring your iPhone, please make sure to follow the directions in the link below to properly restore.
Restore your device from an iCloud or iTunes backup - Apple Support
Take care,
Alex H.

Upper/lower limits of Math.random

Hi,
I currently have applied a random range to my Mouse Cursor. So it fluctuates on the Y axis.
However it obviously takes any value between 0 and 10.
I would like it to either take 0 or 10. I know you can use math.round / ceil, but does anyone know how I could achieve this?
Thanks.
var mouseposy = mouseY;
          var mouseposx = mouseX;
const DURATION:Number = 1;
const VERTICAL_RANGE:Number = 10;
var timer:Timer = new Timer( 50, DURATION * 20 );
timer.addEventListener( TimerEvent.TIMER, onTimer );
timer.addEventListener( TimerEvent.TIMER_COMPLETE, onTimerComplete );
timer.start();
function onTimer( $event:TimerEvent ):void
    myCursor.y = mouseposy - (VERTICAL_RANGE * ( Math.random() * 5 ));
          myCursor.x = mouseposx
          stage.removeEventListener(MouseEvent.MOUSE_MOVE, mouseMoveHandler);
          myCursor.visible = true;
function onTimerComplete( $event:TimerEvent ):void
    x = y = 0;
          stage.addEventListener(MouseEvent.MOUSE_MOVE, mouseMoveHandler);

try replacing with these lines
const VERTICAL_RANGE:Number = 1
myCursor.y = mouseposy - ((VERTICAL_RANGE * Math.ceil( Math.random() * 2 ))* 10);

Sales price upper/lower conditions

hi,
I would like to know if it's possible to set a warning message, if we set a sales prices upper or lower (in % or not) then a default value.
I have already defined upper/lower limits for the sales conditions but does not work.
Thank you very much
Pedro Barros

Hey Ines,
LSMW is probably your best bet. The only tricky part is ensuring your key combination string e.g. Sales Area, Customer, Article is included for SAP to figure out which pricing table to update. If you create an LSMW object using a recording, it calls tcode VK15 (for what its worth...).
The other option you could try is CATT (Computer Aided Test Tool). You can access that via transaction SCAT. That will do the trick for as well.
Good luck!
Cheers,
Paul...

Graph of Multiple Numeric Result displaying measurements and upper and lower limits

Is there a way with your graph control to show all the measured values against upper and lower limits in the same graph?. I can display individual lines, but would like to show all the data on the one graph. The woefully cryptic help files you provide with the graph control in TestStand seriously needs attention (Give examples!) also axis labelling, how is that achieved?

Hey Brian,
I'm not sure I understand what you're wanting to see with the data plotted on the graph--would it be possible for you to show us an example, even if it's just a drawn mockup of what the graph would look like? I'd like to look into it a bit and confirm that there is not a way to display the data.
Also, could you provide a bit of detail about the problems you've run into with using external languages with the ATML and XML reports? I'd like to understand that issue a bit better as well to determine how we could address it.
One thing you might be interested in is that we can currently embed images in the report by inserting HTML code linking to the image. I've seen cases where a LabVIEW VI plotted some data onto a custom graph, saved a picture of the control, and linked the image into the report. Here is a KnowledgeBase article which describes how the linking process works: http://digital.ni.com/public.nsf/allkb/D98A271E30431C9D86256C230079843A?OpenDocument
I'll look forward to your reply about what you're hoping to see, and perhaps we can think of the best way to accomplish it with the reporting mechanism in TestStand. As Chiara mentioned, if there are features you would like to see that are not currently possible with our reports, the Idea Exchange will be a great place to post that.
Thanks!
Daniel E.
TestStand Product Support Engineer
National Instruments

How do I turn on my wireless keyboard and make it 'discoverable'? I got a message that the batteries were low, so I changed them for new ones and now the keyboard doesn't work.

I got a message saying that the batteries were low, so changed them for new ones and now the keyboard cannot be 'found'. There seems to be no way to turn it on and make it 'discoverable' to the system. At the moment I'm typing this on a spare keyboard plugged into the back of my mac via a USB. Please help!

Have you checked to make sure the batteries are inserted the correct way? Have you tried to turn it on by pushing the right upper (round) edge of the keyboard - if you do that, do you see a tiny little green light? Since you have a wired keyboard, can you get to the Bluetooth setup/preference pane so you can manually try to sync the keyboard?
PS - posting duplicate posts is not helpful - it makes things too confusing, so I've asked the hosts to remove your other (identical) post.

Why Would Upper Field Dominance Change The Quality Of My SD So Much?

I did a shoot in SD and edited it as such of course. The thing is when I was done, all of my slow motion looked echoy (a plague of mine if you're not familiar with my posts) and generally looked a bit lower quality then even SD usually gives. So I freaked out (finally) and found a guy on line that suggested changing the field dominance to Upper and to make sure that I have my Video Processing set to "Fastest Linear". Now this was a guy that has had this posted for a couple of years, so it wasn't like he actually told me this directly.
Well, it worked. The video looks good, slow motion is nice and smooth. Just for fun, plus the fact that I don't have a clue what I'm doing, I decided to see what it would look like leaving the processing the to Fastest and change the dominance to lower, and behold, the cruddy video plague of mine returned. It seems like everywhere else I look, people say not to do this, but it worked. Why? I do know what the dominance of upper and lower are, I'm just not smart enough to know why it worked and I want to learn this badly. For example, would I do this same dominance for HD?
Thanks again guys,
Crayton

I filmed it in SD on my Sony HDV-AU1 camera. What is killing me is if I choose upper then the footage looks fine, but then what I have done is add some jpeg images that I created in photoshop on a PC. they are simple images of text that say "Round 1" or "Round 2" in between the fights. I have them spin into view using one of the transitions in FCP, but when I get it to dvd, they look horrible, echoy, just like the footage looked like before I changed it to upper field. So as it looks now, I can't have both look good i guess. This doesn't make sense to me!! It is incredibly frustrating especially since I'm out of money and almost out of time on this project (it has to be done by next week). I keep re-doing the project, re-building it, re-setting it in one type of sequence after another and it's not looking good at all. what am I doing wrong?

Mic Placement/Sound Proofing The Mic Area

Hey guys,im having trouble with my vocals getting lost in the mix of my songs..i think one reason is that my mic (U87) has no sort of sound proofing around it..i usually sit the mic in a corner of the room and record vocals just like that..but now im wondering should i sound proof that area and maybe i would get a better vocal sound..im running my mic into the Focurite Trackmaster Pro,out of that into my M-Box..levels are pretty good before i record so i dont think its a level problem. i always fing my self playing(fader fighter) when im mixing..i cut the vocal up now the snare sounds to low,i cut the snare up now the vocal sounds to low..help please!!

Unless you're noticing some odd ambience being recorded with the vocal then I'm not sure sound "treatment" will be the thing you need.
(Sound proofing is to stop leakage of sound in or out of the room, treatment is aligning the sound within the room.)
Sounds more like you need to look at the way you're mixing, and/or recording the vocal. If you're having problems with the vocal taking away from the snare and vice versa, then maybe look at the way you treat the two sounds, try making them fit into more different frequency ranges to separate them more. Or try treating them with different ambiences. They're such different instruments I don't quite see how they should cause a problem in the mix. I can't say I've ever thought "man that snare gets in the way of the vocal." that's like saying, "turn the hi hat down it's ruining the bass part."
Think about how you're equing the vox/snare and how you are compressing them if at all, as well.
Also maybe try monitoring differently try listening to your mix in the car or at a friends to compare how it sounds in different places.
You will have to automate the levels of the vocal unless it's VERY consistently performed thats just the nature of a human voice.

Amending the mic upper lower limits at the time of RR

Similar Messages

Maybe you are looking for