Ammature lookng for good memory

I'm an kinda an ammature looking for a little help with finding some good memory for the compter a friend built for me. It's an nVia K7N2 Delta. Ive been hunting around for a few days now to get an idea about what memory is going to work the best within my system. I realize i'm limited to PC3200 in terms of speed but are there some brands of memory that are going to work better with my athlon processor and MSI motherboard?
Unfortunatly, the test report site on the MSI's homepage seems to be gone (guess the motherboards too old) so i would greatly appreciate any suggestions!

K7N2 Delta Series Test Report
This is the AMD Nvidia 64 Forum you'll find more help here AMD nVidia/AMD/SiS SocketA based board
Luck

Similar Messages

Ive deleted contacts from my contacts list but they still pop up when i go to text and type in the name of a current contact. . How can i delete them off my phones memory for good?

Ive deleted contacts from my contacts list but they still pop up when i go to text and type in the name of a current contact. . How can i delete them off my phones memory for good? iPhone 4S

At the present time, the only way to clear that is to restore the phone as new. Perhaps a future iOS update will give us the option to clear that cache.

What is the slot order for mixing memory

I have a new Mac Pro (8 core) and I installed 4 4-gig memory modules (slots 1,2,5,6). I also have 6 1-gig modules that I removed to make room for the 4-gig modules. I thought I could use 4 on the 1-gig modules in the empty bays for a total of 20 gigs. However, when I install the 1-gig modules I get a blinking power light and the machine never boots.
Am I placing the modules in the wrong slots, or is it not possible to mix modules like this?

Apple seemed to think mixing wouldn't be a problem, unless the real world is different. Did you follow the placement shown in this PDF? Might still want to try putting in only two 1 gbs though, you'll still have plenty of RAM and, according to this Apple quote,
"For optimal memory bandwidth, all six memory channels should be used, and memory should be balanced across the six channels.".
"Populating slot 4 or 8 slightly drops maximum memory bandwidth, but depending on the applications used, overall system performance may benefit from the larger amount of memory".
http://manuals.info.apple.com/enUS/Mac_Pro_Early2009_Memory_DIMMDIY.pdf
Shouldn't hurt to try... Per the manual, if your Mac blows up, Apple would have to replace it.
If you can get all your RAM to completely show up, the 4gb RAM, that's the time to monitor things and test without the added sticks. Once the Mac runs smoothly for awhile and the RAM consistently shows up, then I think that might be the best time to try the other sticks and see what happens..
Really have to make sure that RAM is seated well, and it wouldn't be a bad idea to do a SMC reset while you're in there. It sometimes unsticks, sticky RAM.
Good luck.
http://support.apple.com/kb/HT1806

Looking for a memory that is reliable!!!

Hello fellas,
I'd like to upgrade my current memory Ram( from 1GB to 2GB),
but i'm quite corncened in prices, is there any place out there who sales as Good Quality RAM as Apple but with a reasanable price? I mean i don't wanna screw up my MB with something that will never work as it should!
Thanks in advance.

The quality is probably good, but I've never used that memory before, so I can't be sure. In the past, I have had issues with quirky behavior in my PowerBooks if the added memory isn't closely matched to the existing bank of memory. Several people on various forums pointed me to Crucial, and since I have been buying from them, I have never had a problem.
The memory you are looking at is much cheaper than what I buy from Crucial, and it might be just as good. There's no way I can be sure of that, though. Unless someone else here confirms that it will be a good match for the memory already in the MacBook, you'll just have to order it and try it. Then you will be the authority.

The Firefoks without any plug-ins - 220 mb !!!! It is not normal for good programm!!!

The Firefoks without any plug-ins - 220 mb !!!! It is not normal for good programm!!! I`d like to see the 10-20 Mb in the Task Manager. It is normal for good browser. How i can decide this problem? Every plug-ins in the OFF position.

hello, this is a very normal value for a modern browser. it is impossible to reduce the memory footprint ten-fold as you'd like it...
in independent tests firefox has generally been found to be the lightest browser in regards to memory usage among the major competitors: http://lifehacker.com/browser-speed-tests/

Looking for internal memory card ready

Looking for internal memory card ready for dual 450mhz g4 (gigabit)
Want to put it in the 3.5" slot the ZIP® drive was in.
Anybody know of any good/compatable ones?
thanks

I have never seen an internal media card reader designed to fit in a Mac. Most are designed for the PC to fit in a 5.25" optical drive bay. If you could somehow modify one of those units to fit in your machine, you would still need a USB card with an internal connection to service the card reader.
-Douggo

What's your strategy for in-memory databases?

The recent Lattanze Center research study identified trends that you cannot afford to ignore. Dr. Elliot King will present the latest research during an informative webinar entitled: u201CIn-Memory Database Adoption is Gaining Momentum. Whatu2019s your strategy?u201D
For more information: http://bit.ly/kDpsfH
When:                June 2 at 10:30 AM PDT.
Duration:     45 Minutes
Cost:               Free
Location:          At your computer
Space is limited, so register now @ http://bit.ly/ilgFot
Besides learning about the latest trends within In-Memory Database technologies, youu2019ll also receive a free copy of a new White Paper, u201CMaking the Business Case for In-Memory Databasesu201D and the Executive Summary of the recent research from the Lattanze Center for Business Excellence.
Thursday, June 2, 10:30 AM PDT. Register now @ http://bit.ly/ilgFot Space is limited!

Well, it seems like most of you simply read the
various texts and try the vendors' examples. I'm
surprised that no one mentioned ever having bought a
prototype application from the onset. "bought"? What's that mean? You don't buy prototypes. You download evaluation versions, maybe.
I try to find sample code and tweak it to see the effects. Otherwise, I start writing small sample code an build on that.
I consider myself a reasonably competent core Java
programmer, but I had serious difficulty configuring
and merging its related technologies. There were so
many disjointed pieces of instructional information
that the additional research time really hurt our
budget severely. Not an uncommon thing, I'm sure. There's a lot of stuff. But don't bother learning all of it. Not in detail, at least. It's a good idea to familiarize yourself with the names of packages/libraries and what they do. But only really learn what you need to learn for what you need to do. The next project you will probably need other things, so you learn them then.
bsampieri,
I've setup Tomcat and tried the examples--in fact, I
normally follow tutorials for all products I hope to
use. Problem is, the examples and tutorials never
address my specific needs. So, I usually inch toward
my goal by spending weeks or months in forums to
continue where the tutorials leave off. Anything complex is going to not be there.... the trick is to identify pieces that you can pull out to build more complex apps. And the fact that JSP/servlets have the issue of being compounded by all the HTML/CSS/JS and HTTP protocol ... I don't want to say limitiations, exactly... Well, it just makes things more complex and harder to know what you need.
Perhaps you guys are much faster and smarter than
I...or you have a much bigger budget :)Probably not... on either account.

Source for 2GB Memory for NB100-12A

Can anyone tell me where I can obtain the 2GM memory upgrade for my NB100-12A? How much does it cost? To install it, do I have to remove existig 1GM and replace with new memory or what is the procedure?

First, a question - are you running the pre-installed version of Windows XP? If so, I'm not sure it will support 2GB of RAM - does anyone know for sure? +Officially+ the NB100 only supports 1GB, so I'd check before spending any money...
Assuming your OS +does+ support 2GB, I'd suggest you try Crucial - good memory, good service and a fair price. If you go to the following link, you can enter the details of your netbook and it will provide a link to the correct memory:
[Crucial memory|http://www.crucial.com/uk/netbook/index.aspx]
It looks like it's about £20 at the moment - prices have risen lately :( You could get memory that's +slightly+ cheaper, but then you'd have the hassle of working out exactly what to get.
In terms of fitting, you need to remove the cover on the bottom of the NB100 (it's secured by a single screw). Remove the existing RAM and fit the new stick. Re-attach the cover and reboot - job done :)

Automatic sync is only available for external memory?

Hi. I am using Windows Media Player 12 on Windows 7 with an 8 GB Clip+ fitted with a 32 GB memory card. The USB mode is set to MTP. I have set up automatic sync in WMP for the externeal memory. However the option to "Start sync when device connects" is greyed-out for internal memory. Am I doing something wrong? Thanks.

I'll leave matters to the sync gurus--I'm an old-fashioned drag-and-drop/copy-and-paste guy.
As to MTP mode--I agree with you, it sounds attractive. But there can be glitches with it, unfortunately, including its renaming of files--yuck. In contrast, MSC mode just works and is easy to use. And pretty much everything that you can do with MTP mode can be done with MSC mode, apart from the play of DRM-protected files such as some library items (if you need that, stay with MTP--or, I guess, switch when you need it).
Recommended that you clean away whatever user files you have on your player placed there under MTP mode, set to MSC mode, and reload your content. (Reason: your computer can only see the files on your player that were put there under the USB mode that you are now connected to your player under. Hence, a good reason to use a single USB mode and not switch, as well as not to use the "Auto" mode which indeed can switch between USB modes, without your knowledge.)

Different GOGS GL account for goods issue

Hello SAP export,
The F&A department requests to generate different COGS GL account based on Customer Account Assignment Group when goods issue (or billing). Customer Account Assignment Group field name is KNVV-KTGRD. The solution is NOT possible at T-CODE OBYC (with GBB transaction (MM FI configuration for goods issue) because we are using the same materials. (All materials are with same valuation class in MATERIAL master).
I had posted this question in SD forums but the export suggests me to post in FI forum.
If you know any workable solution, please help.
Great thanks in the advance!

Hi,
Check the link for how to have default a G/L account on a Purchase Order account assignment for an inventory item & how to post to a separate G/L account for inventory item by having GR posting
http://www.bluemarlinsys.com/ns/0603-03.asp
OR
you can have a thought of having different valuation grouping codes where you can have different G/L posting with respect to plant for same materiel
valuation grouping code........valuation area
0001......................................P001(plant-1)
0002----
P002(plant-2)
Regards,
Biju K

Report for vendor no., vendor name for good receipt documents on KSB1

Hello,
My client needs vendors on KSB1 report. I told them about offseting account, but it doesn't show vendor for good receipt documents.
Is there any place else they can view vendor, vendor name for those good receipt documents .
Any MM report or AP report .
Thanks,
T.G

Hi,
Please go to FBL1N, In Dynamic Selection give document as "WE", this will give and enable Purchase Order Number
This will give you Vendor Name, Purchase Order and FI Document number or u can try MB51, there you will not get Vendor Name, but you will get Vendor Code, Material Document Number and Purchase Order Number
Br,Vivek
Edited by: View_taurian on Oct 22, 2011 12:01 AM

Source for Good Pro-Quality Custom Greeting Cards

hello all:
i'm interested to know if anyone has found a source in the US for good, reliable, pro-quality greeting cards that can be made from digital photo files. i've been getting a lot of inquiries from clients about posing for family portraits to be used as holiday greeting cards. this is a service i've yet to offer as part of my growing portrait biz.
importing selected picks into iPhoto and ordering through there seems like a reasonable workflow, however, the prices for iPhoto's cards are kinda high.
thanks,
scott
PowerMac G5 2.5GHz Mac OS X (10.4.7) MacBook Pro 2.0GHz

White House Custom Colour has excellent press-printed products such as greeting cards, business cards, etc.
www.whcc.com

Smart form for Goods issue

I am facing a problem with smartform. I am creating a smartform for good issue
This is the smartform Z_SMB40_MMGI1_L and this is the print program Z_SMB40_M07DR
For ME application i have assigned the output type wlb1 and the above said form in nace.
I am picking the document number from mb51 based on the movement type 309
in mb02 for each document i am trying to assigning the output type wlb1
i was able to assign the output type for only one document number for rest it is showing warnings and also for few documents i am receiving error
Express document "Update was terminated" received from author "xxxxx"
how do i assign for all documents at a stretch (in which t code).
in mb90 i am trying to view the form but it is throwing the error
START_FORM is invalid, OPEN_FORM is missing,
even though i have removed the script name.
can u please help me out by providing the corresponding print program and smartform for above said scenario
<MOVED BY MODERATOR TO THE CORRECT FORUM>
Edited by: Alvaro Tejada Galindo on Dec 23, 2008 3:47 PM

Hi,
Go to Nace .The application for Goods Issues is
ME - Inventory Management -> select and click on output types ->select wa03 output type and click on processing routines here you can find the form name and the driver program name.So while printing select wa03 as the output type.
<REMOVED BY MODERATOR - REQUEST OR OFFER POINTS ARE FORBIDDEN>
Regards,
Harini.S
Edited by: Alvaro Tejada Galindo on Dec 23, 2008 3:46 PM

Error in customized smartform for goods recipt

Hi experts
I have created a customized smartform for goods recipt .
I have used form entry_we01 inside my zprogram and basically fetching the material document no from NAST-objky
The problem is when i assign my program in TXN NACE
it prevents the update of material document no MBLNR in the
MSEG table .
I get an express document as soon as I try to display the goods recipt stating " UPDATE HAS BEEN TERMINATED".
and although material document has been generated it is not updated in the MSEG table.
By the way this error does not happen when i use the standard driver program and standard form (SAPSCRIPT).
Please suggest a solution

Hi,
Your problem may not be related with what you done in NACE.......Check for any other recent changes made in the System...

I have an older iPod that no longer shows up in iTunes or appears to be charging. When I press the Menu and Select buttons, the Apple logo appears and then an icon of a battery with an exclamation point. Is it dead for good?

I have an older iPod that no longer shows up in iTunes or appears to be charging. When I press the Menu and Select buttons, the Apple logo appears and then an icon of a battery with an exclamation point. Is it dead for good?

If it is otherwise working, you can change the battery. If you want to do it yourself, you can buy the part on eBay and other online sources. Just make sure you know the type of iPod you have so that you get the right part.
http://support.apple.com/kb/HT1353
There are online guides, including the ones on this web site
http://www.ifixit.com/Device/iPod
(Note: Most replacement batteries come with plastic/nylon tools seen in the guides.)
You can also have a repair business do the work.
If it is just the battery, if you do a Reset (using the Menu and Select buttons) while it is connect to your computer, I think it should still be recognized by iTunes.

Ammature lookng for good memory

Similar Messages

Maybe you are looking for