Amount downloaded exceeds total size of file?

I'm trying to download a few files from one certain site. None complete because once the size of the file downloaded matches the file's actual size, both 'download speed' and 'est. time remaining' turn to 'unknown' while the amount downloaded doesn't stop; eg 4.0 MB of 3.0 MB completed. Is this the site's problem, and not an issue with Firefox? All downloads from other sites run normally.
== URL of affected sites ==
http://

Hard to say what the problem might be caused by. Could be that one download server, or it might be the FireDownload addon that you are using. Or it could be Firefox itself.
Do you have that problem with that particular download server with Firefox running in the Firefox SafeMode, or with that addon disabled?
[http://support.mozilla.com/en-US/kb/Safe+Mode]
Or you ask about that problem at the support pages for that FireDownload addon.
http://www.fireaddons.com/support/

Similar Messages

How can i see the total size of files which i have been selected?

I want move my files including movies and photo to the tumpdrive.
But, my tumpdrive told me which was only 500MB space.
Therefore, i decided that choose some movies and photo to there.
When i chose the files i don't know how much of the total size which i've been selected.
if above 500MB, i could move.

With them selected, press the Option, Command, and I keys.
(75125)

Problem in Rolling to new a log file only when it exceeds max size (Log4net library)

Hello,
I am using log4net library to create log files.
My requirement is roll to a new log file with name appended with timestamp only when file size exceeds max size (file name ex: log_2014_12_11_12:34:45 etc).
My config is as follow
<appender name="LogFileAppender"
type="log4net.Appender.RollingFileAppender" >
<param name="File" value="logging\log.txt" />
<param name="AppendToFile" value="true" />
<rollingStyle value="Size" />
<maxSizeRollBackups value="2" />
<maximumFileSize value="2MB" />
<staticLogFileName value="true" />
<lockingModel type="log4net.Appender.FileAppender+MinimalLock" />
<layout type="log4net.Layout.PatternLayout">
<param name="ConversionPattern"
value="%-5p%d{yyyy-MM-dd hh:mm:ss} – %m%n" />
<conversionPattern
value="%newline%newline%date %newline%logger
[%property{NDC}] %newline>> %message%newline" />
</layout>
</appender>
Issue is date time is not appending to file name.
But if i set "Rolling style" as "Date or composite", file name gets appended with timestamp, but new file gets created before reaching max file size.(Because file gets created whenever date time changes, which i dont want) .
Please help me in solving this issue?
Thanks

Hello,
I'd ask the logfornet people: http://logging.apache.org/log4net/
Or search on codeproject - there may be some tutorials that would help you.
http://www.codeproject.com/Articles/140911/log-net-Tutorial
http://www.codeproject.com/Articles/14819/How-to-use-log-net
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

F-48 - Withholding tax amount exceeds total bank line item amounts.

Dear all
In F-48 i am getting following error msg,
Withholding tax amount exceeds total bank line item amounts.
Message no. 7Q320
All Config settings or ok.
Kindly suggest with suitable solution.
With thanks
Jai

Dear,
Select Relevant to cash flow field for Bank GL you are using for making down payment.
Regards,
Chintan Joshi
Edited by: Chintan Joshi on Jan 21, 2010 10:21 AM

Withholding tax amount exceeds total bank line item amounts

Dear Sir,
While I am trying to make down payment to the WHT vendor I have found the above error. Can anybody help. I am not giving any base amount in WHT information while down payment. It is picking automatically tax code P9. I am trying to post the down payment 10000/- and P9 tax code amount is 2.266%.
BSR

HI,
If the Error is 7Q 320 'Withholding tax amount exceeds total bank line item amounts'
then follow
Kindly check in the relevant bank GL account master whether you have
activated the field "relevant to cash flow" in the create/bank/interest
tab in the GL account master FS02. Also refer the SAP Note 198368.
Reg
Madhu M

ALBPM 6.0 : The maximum size for file uploads has been exceeded.

Hi,
I use AquaLogic BPM Entreprise server to deploy my Process. When I try to publish a process on my server I get the following error:
An unexpected error ocurred.
The error's technical description is:
"javax.servlet.jsp.JspException: null"
Possible causes are:
The maximum size for file uploads has been exceeded.
If you are trying to publish an exported project you should publish it using the remote project option.
If you are trying to upload the participant's photo you should choose a smaller one.
An internal error has ocurred, please contact support attaching this page's source code.
Has someone resolve it?
Thank's.

Hi,
Sure you've figured this out by now, but when you get the "Maximum size for file uploads" error during publish consider:
1. if your export project file is over 10mb, use "Remote Project" (instead of "Exported Project") as the publication source. That way when you select the remote project, you will point to ".fpr" directory of the project you are trying to publish.
Most times your project is not on a network drive that the server has access to. If this is the case, upload the .exp file to the machine where the Process Administrator is running, then expand it in any directory (just unzip the file). Then, from the Process Administrator, use the option to publish a Remote Project by entering the path to the .fpr directory you just created when unzipping the project.
2. Check to see if you have cataloged any jars and marked them as non-versionable. Most of the times the project size is big just because of the external jar files. So as a best practice, when you do a project export select the option "include only-versionable jars", that will get reduce the project size considerably (usually to Kb's). Of course you have to manually copy the Jar files to your Ext folder.
hth,
Dan

How to find total size of RMAN backup files?

Hi there
env: Oracle 10gR2, RHEL 64bit
My client has a production database where rman backups are taken: Level-0 backup every Sunday and Level-1 Monday thru Saturday.
I have very limited access to this production database because it is being managed by third party and they won't provide me my required info (not sure why). I do not have access to their rman repository. To connect to the database I have to login to an intermediate server and then login to the database server. I have no access to Enterprise Manager. So in short, my access is limited. I want to gather the information on total size of rman backup files - both for a Level-0 and Level-1 backups separately. I understand that this info can be retrieved from rman repository. Are there any data dictionary views/tables where I may get this info?
Best regards

Hi,
Have you searched in forum check this:https://forums.oracle.com/thread/1097939
HTH

Get Total DB size , Total DB free space , Total Data & Log File Sizes and Total Data & Log File free Sizes from a list of server

how to get SQL server Total DB size , Total DB free space , Total Data & Log File Sizes and Total Data & Log File free Sizes from a list of server

Hi Shivanq,
To get a list of databases, their sizes and the space available in each on the local SQL instance.
dir SQLSERVER:\SQL\localhost\default\databases | Select Name, Size, SpaceAvailable | ft -auto
This article is also helpful for you to get DB and Log File size information:
Checking Database Space With PowerShell
I hope this helps.

Zip files Exceedingly compressed size message of 30 megabytes are quarantined

I get this message when I received a zip file over 30 megabytes.
FILE QUARANTINED
The original contents of this file have been replaced with
this message because of its characteristics.
File name: '172-16-1-4-04SEP14.ZIP'
Malware name: 'Exceedingly compressed size'
I have 3 question
1. How do I turn off the function in Exchange 2013 of blocking ZIPs over 30 megabytes?
2. Where is the "quarantine" located that the error message is referring to?
3. If I want to how can I raise the value to 50 megabytes?
Please do not post information about Forefront on this. This is not a Forefront problem
Moses Hull of Alexant Systems

Hi,
Please check if the below information helps.
Maximum attachment size in Transport rules that apply to all Mailbox servers in the organization can be created, set and viewed using below command
Cmdlets to set: New-TransportRule, Set-TransportRule
Cmdlets to Get: Get-TransportRule
Parameter: AttachmentSizeOver
Or in EAC
Mail flow > Rules > Add
or
Edit .
Use the predicate Apply this rule if > Any attachment >
is greater than or equal to
Use the predicate Apply this rule if > The message >
size is greater than or equal to
Refer
http://technet.microsoft.com/en-us/library/bb124345(v=exchg.150).aspx

I bought creative suite cs6 design standard student and teacher edition and the download did not work properly - files appear incomplete/ or damaged - none of the program items work at all. File size for installation seems very small for a product of this

I bought creative suite cs6 standard student and teacher edition and the download did not work properly - files appear incomplete/ or damaged. File size seems very small for a product of this size. Can you assist with download issue or provision of software ?

Lalalaladog where did you download CS6 from? I would recommend downloading the installation files for Creative Suite 6 Design Standard at Download CS6 products

TS1398 I have recently updated my iphone 5 to ios 6.0.2 but wi-fi is still slow. It takes a lot of time to download the files. But web browsing is OK. I have downloaded an app size 8 MB but it take around 15 minutes on my wifi. Please help Apple.

I have recently updated my iphone 5 to ios 6.0.2 but wi-fi is still slow. It takes a lot of time to download the files. But web browsing is OK. I have downloaded an app size 8 MB but it take around 15 minutes on my wifi. Please help Apple.

I couldn't find the edit button on my original post so I am posting an update here.
I have gone through more apps and have had good luck on all but one more. And it's not that the app doesn't work, I am talking about the Yahoo Weather app, It works fine, but when you swipe between cities the screen lags a bit and it sometimes doesn't move between pages the way it should. On iOS 7.1.2 it was smooth as butter but on iOS 8.0, not so much. I will post a note in the app store to let them know. I really like the Yahoo app better than the new stock app.
I have been going through my games and they all work fine. Angry Birds (Original and Stella), Canabalt, Minecraft, Bejeweled 2, Silly Walks, PopWords, Doodle Jump, Deep Green all seem to work just fine.
Starbucks app works as it should.
I will stop back again next week after I have had the weekend to play with it in detail and post my thoughts again.

Have been trying all weekend to upload Jpegs- either Send does not work or shows files uploading then shows error- never had this problem with Send Now-16 images total size 92MB-largest image 13MB

Have been trying all weekend to upload Jpegs- either Send does not work or shows files uploading then shows error- never had this problem with Send Now-16 images total size 92MB-largest image 13MB

Hi Ciaran19,
Are you sending files from the Adobe Send interface, Adobe Reader, or the Outlook plug-in?
Have you checked to see whether the files that you're sending appear in the Recent Files/Sent Files list when you're logged on to https://cloud.acrobat.com? (It could be that they're uploading, but not being sent.)
It would also be worthwhile to send the files in smaller batches, to see whether a particular file or files is problematic, and causing the error.
Please let us know how it goes. If you're still having trouble, please let us know where you're sending from, and whether you're able to send the files in smaller batches. It would also be helpful to know the exact error message that you're receiving.
Best,
Sara

How to find total size of selected items in library

My library contains much more than my 2GB Nano can hold. I frequently change the content of the Nano with songs and books. How can I keep track of the total size of items I'm selecting for the next Nano update to speed my update? Presently I can only guess what to unselect if the selections are of greater size than my Nano will hold.

There is no direct way to accumulate total file size when selecting a subset of songs within the Library or a Playlist.
The only way you can manage this is to create an empty Playlist that you can drag songs into. It will accumulate the total size of the songs as you deposit them into it (as described by StarDeb above).
If you get to a size greater than the nano will hold, then remove one or more songs from that Playlist.
There is no 'running-total' of only the selected items like Windows Explorer does. Sorry.

I recently upgraded to Yosemite. Yesterday when I opened up the iPhoto (which I have it in my external drive due to the size of file) I get the message that it is not compatible with the new system(or something like that) and ask me to upgrade so I d

I recently upgraded to Yosemite. Yesterday when I opened up the iPhoto (which I have it in my external drive due to the size of file) I get the message that it is not compatible with the new system(or something like that) and ask me to upgrade so I did. Then another message pops ups and asked for rebuilding the Thumbnails. So I clicked rebuild. Next it asked me to do one of three things(I can't remember all of them) so I chose the last one which is to download a photo to iPhoto. Now I only have that photo I downloaded in iPhoto file but not the rest of my pictures. The iPhoto library which is stored in my EHD shows it has 349GB but it only show one thumbnail of the last picture I downloaded after the rebuild process. What can I do to recover the rest of the file?
Thanks for your help.
George Kyaw
<Email Edited by Host>

I recently upgraded to Yosemite. Yesterday when I opened up the iPhoto (which I have it in my external drive due to the size of file) I get the message that it is not compatible with the new system(or something like that) and ask me to upgrade so I did. Then another message pops ups and asked for rebuilding the Thumbnails. So I clicked rebuild. Next it asked me to do one of three things(I can't remember all of them) so I chose the last one which is to download a photo to iPhoto. Now I only have that photo I downloaded in iPhoto file but not the rest of my pictures. The iPhoto library which is stored in my EHD shows it has 349GB but it only show one thumbnail of the last picture I downloaded after the rebuild process. What can I do to recover the rest of the file?
Thanks for your help.
George Kyaw
<Email Edited by Host>

How do I calculate the total size of selected folders?

Hello
My question is:
How do I calculate the total size of selected folders?
Thank you

It does show the aggregate size.
Command-Option-I opens the Inspector window. (Or open the File menu and hold the Option key. Get Info turns into Show Inspector.) The Inspector is similar to the Get Info window but it shows aggregate info for multiple selections. It is also dynamic — if you change the selection while the Inspector is open, the info changes to reflect the current selection.

Amount downloaded exceeds total size of file?

Similar Messages

Maybe you are looking for