Amount for production order goods receipt

How does the system determine the amount of the product order goods receipt for make to order product that uses variant configuration?
Meaning during sales order, the components are selected to make up that product.

It is using Sales Order cost estimate because it is only calculated when the items are selected in sales order.
If there are changes to the sales order, e.g. options are removed or added...
how do I make sure the GR take the new value?
I did the following test in QAS:
- Production order is created but work not started. Production order deleted.
- Make changes in sales order.
- Re-do cost estimate in sales order. I do see that the calculated cost has changed.
- Recreate production order and as per normal production steps
- When do production order goods receipt, the value remains the old value and not the new one.
Did I missed out or do the wrong step?
However, that also does not help to explain why the value ended up as only $0.01 as same as MM costing view.

Similar Messages

BADI for MIGO ( Material document change for Production Order goods Receipt

Hey experts,
I am actually stuck up with MIGO BADI.
There are many BADI's available but i dont think any one would suit my requirement.
here goes my requirement.
When a Production Order is created in transaction CO01 , the system picks the value of the moving material and multiplies it with the quantity .
But when the production order is being confirmed thru CO11N , again the system picks the present moving price of the material and multiplies it with the quantity. This goods receipt is done through MIGO transaction by selecting goods receipt for order that is 101 movement type. I have been asked to get the value of the material at the time of production order create and then change the dmbtr value of MSEG table, this can be done in the badi at the time of creation of material document number but the BADI's MB_DOCUMENT_BEFORE_UPDATE, MB_DOCUMENT_UPDATE do not allow me to change the values .
The BADI MB_DOCUMENT_BEFORE_UPDATE does not allow any changes to be made for XMSEG table
and MB_DOCUMENT_UPDATE is passed by value and hence the changes are not affected after it comes out of the method.
Guys please help me as this creating a hell lot of problem here and i would surely reward the max points if answered.
here is the example to be more precise.
Material : Pen
Quantity : 10.
date : 01.06.2008.
TYransaction co01.
lets say at the time of creation the value of the material was 5 rs
a material document would be created with the value : 50 rs.
Now for this prod. order goods receipt is being done on 01.07.2008.
Let the value be 4 rs now.
so the Material document would be created with a value of 40 rs.
I need to make this 50 rs.
I have got all the data to do it but i am not gettin the coreect BADI, i just want the BADI name to change the DMBTR value at the time of creation of material Document.
Thanks in Advance.

User-exit /BADI to change mseg during migo
https://forums.sdn.sap.com/click.jspa?searchID=-1&messageID=5435559
try this links

Production Order Goods Receipt in Mass

Hi Frds,
My client need production order Goods Receipt in mass i e at time number of production orders with batch creation,
Could any light on this issue,
Thanks
Mohan M

Dear,
There is no T. code to do the GR in mass you need to use the BAPI BAPI_GOODSMVT_CREATE.
Regards,
R.Brahmankar

Automatic batch management for Production order receipt

Hello ,
I have a requirement to setup & activate Batch Management only for Production order Good Receipt . I am looking out for what all configuration / data setup will be required to complete this .
To start with I have following questions .
1. Whether such activation is possible only for Production order Good receipt - 101 mov.type
2. IF yes , is Batch management activation status be at material or plant level .
3. As I need automatic assignment , should I be selecting Internal batch management .
4. What should be selected for valuation for Goods movement in Inventory management.
5. Is it necessary to have batch determination by maintaining Condition tables / Access sequence
6. What would be standard Class / characteristics to be maintained for automatic determination.
Also I will have to work with the running system where Material are already active and have stock in system . What precautions will I have take if I have to activate the Batch Management in a running system.
Appreciate all your expert advise.
Regards,
Lawrei

Thanks Adler for your comments .
With reference to your point , need further clarifications
1. If batch management is selected to material , this means that it will be active for all movement types for Inventory and cannot be restricted to 101 mov.type .
I see that in config node
+Define Batch Creation for Goods Movements+
    +Using this function, you can define for each movement type whether a new+
    +batch is created for a goods receipt and how it is created.+
Can I not restrict batch creation only for 101 movement , but again here I don't have options to select only for Good receipt for order - Tran/Ev type - WF .
& what about below config node
+Define Batch Creation for Production Order / Process Order+
    +In this step you can make the following settings in batch management for+
    +the existing production control profiles:+
Is it possible in this node .
Please advise.
Regards.
Lawrei

Goods receipt not marked for production order trigger from sales order

Hi all,
In MTO scenario, where requirement trigger from Inquiry -> Quotatation -> Sales Order -> Plan Order -> Production Order, goods receipt indicator in production order was not checked if requirement is triggering from sales order, however it is ticked if requirement trigger from inquiry, therefore we are not able to do confirmation. Appreciate if anyone able to assist us as soon as possible.
Thanks in advanced.

Hi,
I understood that---
If u r creating Sales order directly without Quotation u r not able to do the GR.
If u create from Quotation, u r able to do GR. right?
I think, Problem with Settlement. Please Look into that.
Kiran.

Error during goods receipt of Finished goods for production order

hi friends
pls help me iam struggle this issue and mentioned the issue .
when i do goods receipt for production order system getting error like
No price could be determined for material/batch FG/ plant ZTP
     Message no. CK 465
Diagnosis
     The system could not calculate a price for material/batch FG/ in plant
     ZTP for valuation view 0, because none of the valuation strategies in
     valuation variant 007 was successful.
System Response
     User-defined error management enables you to specify whether the message
     is an error message, a warning message or an information message.
     o   If you have defined the message as a warning message or an
         information message, the costing item will be entered in the cost
         estimate with a value of zero.
If you have defined the message as an error message, the cost
estimate contains an error or errors.
-   In the case of a material cost estimate, the system sets the
    status KF.
-   If it is a cost estimate without quantity structure, or base
    object cost estimate (that is, a unit cost estimate), the
    system cannot proceed with costing until you have corrected the
    errors.
If the system issues a termination message, the cost estimate cannot
be processed, and processing is terminated.
procedure
    o   Check the master data for material/batch FG/ in plant ZTP.
    o   If you have authorization for Customizing, check the valuation
        strategy for materials in valuation variant 007.
    Note
    If the message is a warning message or an information message, there is
    a danger that materials with errors will be ignored by the system.
    If, because of this, you issue a warning message and at the same time
    include materials with a zero value in cost estimates, you can make the
    following settings for these materials in the costing view of the
    material master:
1. Enter a very low price in the planned price 1, 2 or 3 fields
      manually, for instance 0.01 USD. These prices are used for costing
      purposes only; they are not read by other applications.
2. Enter the highest price unit possible, for example 10000.
      Note: If you enter a new price unit that is higher than the costing
      lot size, the system increases the costing lot size accordingly.
3. Change the valuation strategy, such as strategy 4, where you could
      enter the planned price field in which you entered the low price.
      The system now costs as follows:
      Using the valuation strategy, the system finds planned price 1, 2 or
      3. Due to the low price and high price unit, the system rounds the
      value to zero. However, the cost estimate still obtains status KA
      (free of errors), and no error message is issued.
      This procedure can be used for all materials that have caused error
      message CK465 to be issued.
with regards
dinesh
Edited by: code acess on Nov 8, 2010 4:06 AM

hi ragavendra,
this is dinesh .i maintained the costing view and planned price. but again i have same error.so please reply me where i missed the data
with regards
dinesh
Edited by: code acess on Nov 9, 2010 4:01 AM

Early Inspection for a Goods Receipt for production order

Dear Experts,
This is with respect Early Inspection for a Goods Receipt for inspction type 04.( 03 is also active in material master)
We made partial confirmation 250 qty for production order using t code co11n ( total qty of production order is 1000).
made the usage decision with an acceptance and posted all open stocks. to unrestricted.
Now in second partial confirmation prodn order of 250 qty was made . This suppose to be rejected . but sytem will add this 250 qty directly to unrestricted stock . how to over come this .
Regards
Sandeep

Don't make the UD until all stock has been receipted?
You basically approved the batch. So why wouldn't the system put the stock to unrestricted?
Why would you make a UD when you still have stock to be posted anyway? You can post stock without without making a UD so why not just post some if you need it, and wait on making the UD?
Craig

Error during Goods Receipt for Production Order

Hi All,
When using MIGO to post Goods Receipt for a Production Order, I got a customize message saying that the posting is only available between 2010.08.25 to 2010.08.27. I have checked in Business Add-in using SE19 but there are no implementation present. I know that in Logistic Verification MIRO there is a transaction OMRM to set messages. I would like to ask is there anything similar for MIGO.
Or is there any other place in Configuration which allows me to add these Customize message.
Thanks.
Edited by: jamison2004 jordan2004 on Jul 9, 2010 9:09 AM

Hello Jiaul,
Sorry I may have mislead you. The actual error message is "Goods Receipt for Production Order XXXX can only be made on 2010.08.25 to 2010.08.27". These two dates are the Start Date and FInish Date for the Production Order in CO03,
The Basic Start Date for the current Production Order is 2010.08.25
The Basic Finish Date for the current Production Order is 2010.08.27
I think what it means is that you can only Post Goods Receipt for the Production Order only after the Basic Start Date of the Production Order. Do you know where I can find the configuration for this message?
Thanks

Automatic Batch determination at time of Goods receipt for production order

Hi SAP experts,
Greetings to you all. I wish to ask a query that how batch is determined automatically at the time of goods receipt for production order .
I have done the following settings:
1.Specified batch level at material level
2.External batch number assignment
3.Defined production order condition table '501' (plant/material)
4.Defined production order access sequence (order type-plant -material)
5.Defined Production Order Strategy type.
6.Defined Batch search procedure in Production Order.
7.Assigned Batch search procedure to Production order type for a particular plant , batch check not activated.
Please let me know of any more settings to be checked for the same.
For example, a production order is being confirmed for a quatity of 5 nos . at a time . However, the GI movement (261 movement type) for the production order components is taking place for 1 EA qty. from 5 different batches.
So now, how the system will define the GR (movement type 101) for the production order header material for the qty. 5 nos. EA ?
It is desired that the system should do GR for the qty. 1 EA of the header material for the 5 different batches (batches which were automatically deteremined for the Goods issue of the components).
Thanks in advance. good day.
Best regards,
RB

HI Rahul,
As explained earlier, for e.g., if the GR is taking place for the production order for qty. 5 nos. , and in that , if the component qty. is 1 EA for 1EA of header material ; then , the GR for the header material should take place for the same different batches from which the order components were issued for the order and not for the other batches in stock for the header material as well as components.
I am not sure if i understand your requirement 100%.
But let me explain you standard behaviour.
When Confirmation for production order happens and GR is posted during confirmation , All the GR happens agaist same batch number which i sassigned in production order assignment screen.
So for all the order qty single batch would be fixed. Say batch A1 is created for Header material for 100 qty.
Now during components issue to production order, If 100 qty needs to be issued for compoenent B it is possible to use multiple batches of componenets ( using splilt batch functionality /or manual batch number entry agaist componenet in goods movement screen) but header batch remains the same.
Check and Revert,
Santosh Sarda

Bins problem while creating goods receipt for production order.

Hi All,
          I am facing a problem with selection of bins while creating goods receipt for production order in transaction MB31 and MBBE.
The order of filling bins is with respect to storage Unit not by document no, Please suggest something.
The scene is like that.
The bins are not filled in the proper sequence, the system checks for the empty bins and filled those later on.
like this,.
Typ StorageBin SC SS    Stock Avail.st BUn GR Date    DocumentNo Storage Unit         Time
SLoc Batch      Re IA PutawayS Pick qty Cert. No.
VN1 106A088                 0        0 CS 01/25/2010    4739297 1005721391           10:00:59
100 0001020069            60        0
VN1 107B076                 0        0 CS 01/25/2010    4739298 1005721392           10:01:01
100 0001020069            60        0
VN1 108B076                 0        0 CS 01/25/2010    4739299 1005721393           10:01:04
100 0001020069            60        0
VN1 109A077                 0        0 CS 01/25/2010    4739300 1005721394           10:01:06
100 0001020069            60        0
VN1 110B079                 0        0 CS 01/25/2010    4739301 1005721395           10:01:08
100 0001020069            60        0
VN1 106B088                 0        0 CS 01/25/2010    4739302 1005721403           10:01:11
100 0001020069            60        0
VN1 123B158                 0        0 CS 01/25/2010    4739303 1005721389           10:01:13
100 0001020069            60        0
VN1 124A160                 0        0 CS 01/25/2010    4739304 1005721390           10:01:15
100 0001020069            60        0
VN1 118A133                 0        0 CS 01/25/2010    4739305 1005721396           10:01:17
100 0001020069            60        0
VN1 119A128                 0        0 CS 01/25/2010    4739306 1005721397           10:01:20
100 0001020069            60        0
VN1 120B162                 0        0 CS 01/25/2010    4739307 1005721398           10:01:22
100 0001020069            60        0
VN1 121B159                 0        0 CS 01/25/2010    4739308 1005721399           10:01:24
100 0001020069            60        0
VN1 122B159                 0        0 CS 01/25/2010    4739309 1005721400           10:01:26
100 0001020069            60        0
VN1 123B159                 0        0 CS 01/25/2010    4739310 1005721401           10:01:29
100 0001020069            60        0
VN1 124B160                 0        0 CS 01/25/2010    4739311 1005721402           10:01:31
100 0001020069            60        0
Thnks you,
Anmol.
Edited by: anmol112 on Jan 25, 2010 10:34 PM

no replay, clossing threat.

Batch derivation in goods receipt for production order

Hi all,
i have set up batch derivation for the event 'goods receipt for production order'. The field derived is HSDAT (date of manufacture) /minimum. Although in the batch derivation monitor I can see tha the derivation was performed OK and the correct date (oldest of the components) is selected the field in the Batch is not updated. Can anyone help??

Hi Vagia,
Your problem sounds like derivation type issue.
Please check your derivation type to be static for the 400 event.
Let us know if this helped.
Regards.
St.Pan.

Good receipt for production order

Hi experts,
When good receipt for production order 60003408 , it shows error "No valid order items exist for order 60003408" like this how to resolve this...
In diagnosis they were specified as change into good receipt in production order screen but in default it shows GR Non-valuated.
Thanks

Hi,
You can create production order directly from sale order at CO08.
You can create the production order without material in CO07.
CO07 specially meant for Rework order (Production order without material)
Hope claer to you.
Regards,
R.Brahmankar

Price change for material with Goods Receipt with out Order reference?

hi all,
Our client company have some finished products produced from raw materials. But we are not using Production planning module. So in MM we are receiving these products with Goods receipt with out order reference(521).
The issue is, the price for this product will change monthly. This new price will affect the existing stock as moving average price calculation.
ex:
                                 Quantity             Price             Value
Stock balanace        100To                 2.00/To         200
Newly produced      100To                 2.20/To         220
after the GRN for newly produced is done. The price also need to change as below.
Total                         200To                 2.10/To         420
This is easy if we receive goods with PO price, as moving average price will updae in the master record.
But here no reference. So only quantity updated with existing price.
So how to achieve the change of price ? Please help.
Thanks,
Aravind

Hi Bijay,
Thanks for the reply. I will use the posting method suggested by you.
but how you are arriving newly produced material quantity & price!
The reply for your comment is,
Every month My client company revise the price of the produced material based on various factors including the
raw material purchase cost.
The price will be fixed for the whole month.
While posting the GRN, the accounts updated are,
Dr Material account
Cr Production Cost
Please let me know what you have asked is answered or not.
So that i can brief more. This is my initial project. So your feedback is very helpful to me.
Thanks,
Aravind

How to restrict the GR for Production Order when Goods Issue is not done

Hi Gurus
How to restrict the GR for Production Order when all the required components for production order are not issued with all required quantity. Even for partial issue system should not allow GR with 101. The user status with RMWA, RMWF & CGFB is not working.
Pls suggest best solution.
Abhijit.

Hi,
You can club together the GI nad GR at the time of confirmation..
I.e Backflush for the components and auto GR for the Product.
So that you can stream line the Process.
The best Option would be to use the User Exit:
Enhancement - MBCF0002
Functional Module - EXIT_SAPMM07M_001
Include - ZXMBCU02
Refer below link for further details..
How to stop the goods receipt before issueing the goods for production orde
Regards,
Siva

Error while doing Good Issue for Production Order using BAPI

Hi All,
I am facing an error like 'u2018Content of order 1011907: MDT218AJ10 transferred to interface (IMSEG): T-86410-71".
I have written the code as below. Please let me know what is missing when using the BAPI 'BAPI_GOODSMVT_CREATE'. What is the cause of this error ?
*Action in Transaction (GM_CODE)
*GM Code for Goods Issue for Production Order is 03
gs_gmcode-gm_code = '03'.
*Header Data
*Posting date
gs_header-pstng_date = sy-datum.
*Document date
gs_header-doc_date   = sy-datum.
*Item Data
*Material
gs_item-material = zptp_s_rf_migo_261-matnr1.
*Movement Type
gs_item-move_type = '261'.
*Movement Indicator
gs_item-mvt_ind   = 'F'.
*Stock Type
gs_item-stck_type = 'F'.
*Plant
gs_item-plant     = gv_plant.
*Storage Location
gs_item-stge_loc = gv_str_loc.
*Quantity
gs_item-entry_qnt = zptp_s_rf_migo_261-menge2.
*Unit
gs_item-entry_uom = gv_uom.
*ISO code for unit of measurement
gs_item-entry_uom_iso = gv_uom.
*Order Number
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
    EXPORTING
      input = zptp_s_rf_migo_261-aufnr
    IMPORTING
      output = gs_item-orderid.
*Reservation Number
gs_item-reserv_no = gv_resv_num.
*Reservation Item
gs_item-res_item = gv_resv_itm.
*Reservation Type
gs_item-res_type = gv_resv_type.
APPEND gs_item TO gt_item.
Calling BAPI_GOODSMVT_CREATE to create the Material Document Number
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
    EXPORTING
      goodsmvt_header       = gs_header
      goodsmvt_code         = gs_gmcode
    IMPORTING
      goodsmvt_headret      = gs_headret
    TABLES
      goodsmvt_item         = gt_item
      goodsmvt_serialnumber = gt_serial
      return                = gt_return.
Thanks in Advance.

hi,
did you look at message ?
System says, there are differences between the interface data and the order data. It can be anything. I think you should check
data in the interface .
this is the long explanation of your message :
Diagnosis
When calling the function module MB_CREATE_GOODS_MOVEMENT or the BAPI GoodsMovement.CreateFromData (BAPI_GOODSMVT_CREATE) to post a goods receipt for a production order, there are differences between the interface data and the order data.
Example: The order was created for plant 0001, but plant 0002 is passed on in the interface.
The system checks this for the material and the order item.
System response
Due to this difference, the system cannot post the goods receipt.
Procedure
Check the data in the interface (IMSEG-WERKS, IMSEG-AUFNR). If necessary, correct the plant or the order number in the interface.
<< Moderator message - Point begging removed >>
Edited by: Rob Burbank on Feb 6, 2012 11:24 AM

Amount for production order goods receipt

Similar Messages

Maybe you are looking for