Amount has moved one decimal place in the report

Hi,
I am looking in to a report at present, Transaction amount has moved one decimal place, while the local amount stays the same. Any one could tell me the possible reason for this?
Thanks in advance
RN

Hi,
Check this link,
http://sap.ittoolbox.com/groups/technical-functional/sap-bw/key-figure-in-cube-is-multiplied-by-100-when-displayed-in-bex-report-743076
same issue find in this.
Hope it will help you.
Thanks,
Hema

Similar Messages

Rounding a quantity field to one decimal place. PLEASE URGENT

I have a quantity field with three decimal places. I have to print this field with only one decimal place. This is in a smartform.
suppose: qty = 45.678
I want it to be printed as 45.7
Thanks in advance.

Hi Riki,
I think you can use Function Module ROUND to round off the value...
REPORT ZTEST_SHAIL4 .
data: out type p decimals 1,
inp type f.
inp = '45.678'.
CALL FUNCTION 'ROUND'
EXPORTING
DECIMALS =
input = inp
SIGN = ' '
IMPORTING
OUTPUT = out
EXCEPTIONS
INPUT_INVALID = 1
OVERFLOW = 2
TYPE_INVALID = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Now use the variable 'out' to display the rounded off value...
Regards,
SP.

Quantity field to one decimal place. PLEASE URGENT

I have a quantity field with three decimal places. I have to print this field with only one decimal place. This is in a smartform.
suppose: qty = 45.678
I want it to be printed as 45.7
Thanks in advance.

Create one more variable in Global definitions with only 1 decimal place.
Assign value of qty to this new variable.
SAP automatically takes care of the rounding.
And then print this new variable rather than qty.
You can write all these in a code block.

Formatting decimal places in the X Axis

I’m having trouble limiting the number of decimal places in my X Axis on a 2 Axis plot.
I am running a script file (SUD) that sets all the other parameters in the Plot. The “Report “ file is called up and then the script controls the functions.
This is only a small section of the code. I haven’t found a command to set the Decimal place in the “help” page.
ie: Call GraphObjOpen("2DAxis1_XAxis1")
    D2AxisXFormat    = " "
    D2AxisXAng       = 0
    D2AxisXRelPos    = "bottom"
    D2AxisXFont      = ""
    D2AxisXSize      = 2
    D2AxisXColor     = "blue"
    D2AxisXColorRGB = 50266112
    D2AxisXAutoColor = 0
    D2AxisXBold      = 0
    D2AxisXItal      = 0
    D2AxisXUndl      = 0
    D2AxisXStrOut    = 0
    D2AxisXFrame     = 0
Call GraphObjClose("2DAxis1_XAxis1")
And:
When I open the “Curve and Axis Definition” window of the graph on the report page ,and set the “Format:” function to display “d.dd” It seems the script is overwriting the format that I set.
This is what I have now and would like to display only 2 decimal places in the X Axis. Can you help?
Thanks!
SJD
Solved!
Go to Solution.
Attachments:
X-Axis Decimal places.jpg ‏17 KB

Thanks Brad for you quick response.
It kind of worked... I think I might have something else going on. Not sure what though.
With the changes made in the script you suggested, the X-Axis has changed to two digits but now it displays " 1.dd "
Any thoughts where else I might have gone wrong?
Thanks again
SJD
Attachments:
2013-03-13_151027.JPG ‏12 KB

I need help moving a decimal place

Good morning all. I have the following that needs
manipulating. The first set of numbers is the raw data I have
access too.
Latitude: 3.13929
Longitude: -8.14461
I need it formatted like this:
Latitude: 31.3929
Longitude: -81.4461
I need to move that decimal place to the right one spot. Any
ideas? I have thought of REPLACE, create new value and insert but
my head hurts. I just need some ideas.
Thanks
Terry

Multiply it by 10:
<cfset Latitude = 3.13929>
<cfset NewLatitude = Latitude * 10>
<cfset Longitude = -8.14461>
<cfset NewLongitude = Longitude * 10>
Ken Ford
Adobe Community Expert Dreamweaver/ColdFusion
Adobe Certified Expert - Dreamweaver CS3
Fordwebs, LLC
http://www.fordwebs.com
"WhozitsPop" <[email protected]> wrote in
message
news:ga3elo$1ju$[email protected]..
> Good morning all. I have the following that needs
manipulating. The
> first set
> of numbers is the raw data I have access too.
>
> Latitude: 3.13929
> Longitude: -8.14461
>
> I need it formatted like this:
>
> Latitude: 31.3929
> Longitude: -81.4461
>
> I need to move that decimal place to the right one spot.
Any ideas? I
> have
> thought of REPLACE, create new value and insert but my
head hurts. I just
> need
> some ideas.
>
> Thanks
> Terry
>
>

TS3276 Having trouble sending jpeg images as attachments in Mac email.....they go thru as images and PC users can't see the SAVE or QUICK LOOK boxes that Mac mail has. One friend scrolled over the image, right clicked on it and saved as a PNG file.

Having trouble sending jpeg images as attachments in Mac email.....they go thru as images and PC users can't see the SAVE or QUICK LOOK boxes that Mac mail has. One friend scrolled over the image, right clicked on it and saved as a PNG file.

Apple Mail isn't going to change the format of any of your attachments. it isn't going to corrupt them either.
Exchange is a transport protocol and server. The issue you describe is not related to Exchange.
There are many different versions of Microsoft Outlook in use and they all have e-mail bugs. Different versions have different bugs. Some Apple Mail hack to get around a bug in Outlook 2003 may cause the same message to be problematic in Outlook 2000. Fix them both and another issue will cause trouble in Outlook 2007. You can't fix this. Apple can't fix this. Microsoft can and has but that is irrelevant if your recipients are using older versions.
One specific problem is that Apple Mail always sends image attachments inline, as images, not as iconized files. You can change this with Attachment Tamer. Just be aware that use of this software will break other things such as Stationery. E-mail is just a disaster. To date, no one outside of Apple has ever implemented the e-mail standards from 1993. Apple has continually changed its e-mail software to be more compatible with the de-facto standards that Netscape and Microsoft have unilaterally defined and people documented as "standards" after the fact. The e-mail messages that Apple Mail sends are 100% correct and do not violate any of the original standards from 1993 or the Microsoft/Netscape modifications. The problem is entirely bugs and limitations in various versions of Outlook.

Increase decimal places in the PO quantity and Price

Hi All,
Can the decimal places in the PO( ME21N) creation be increased more than 3 decimal places in quantity and price?
I did changes in UOM's in CUNI, I increased the decimal places upto 14 but still it does not take more than three i-e., 0.001 maximum.
Is there any other way to handle this?
Request inputs on this.
Note 569326 - ME9F: Customized decimal places are not taken into account........ found this OSS but this correction instruction is not for our pack level ECC 6.0
Best regards,
Sridhar

hi
In case if you are already working in production remember that decimal places should not change. It will affect all previous data.
For your problem best solution is make order unit as 1000. So that your problem will solve
e.g. instead of 2.009 inr for 1 Unit use 2009 inr for 1000 unit.

Decimal places on the result row is incorrect

Dear Expert,
I met a problem that decimal places on the result row is incorrect.Anyone can help me?
On key figure balance,we do the currencies translation,also we set the key figure should have two decimal places.
We set a fomular to calculate the total result of Account A,B,C.
(Total result = account Aaccount Baccount C).
If we manually sum up the balance of account A,B,C displayed on analyzer,which are rounded to 2 decimal places,the result should be 601.25(100.61200.38300.26),but the actual total result executed by query is 601.24.
In fact we need the result 601.25 instead of 201.24.
I take the example as following:
Account Balance
Account A 100.61
Account B 200.38
Account C 300.26
Total result 601.24
Thank you in advance.
Best Regards,
Maggie
Edited by: Maggie Ma on Sep 25, 2008 9:17 AM

your "problem" is, that BEx is not totalling the "displayed" values but the real values
try a summation on the following in Excel:
100,605
200,375
300,26
then format the cells to show 2 decimal places only
do you see the result changing?

How to add 2 decimal places if the number is whole number(Integer)

Hi Gurus- I had a requirement to add the zeros for two decimal places even the number is an whole number.
Example: I had a column which i gave the datatype as Number(8,2) .While Inserting from the flat file to the custom table column,i am rounding it to 2 decimal places.But if its the whole number i want that also to be rounded to 2 decimal places.
1) 3456.89675 It's getting inserted as 3456.89
2) 123 It's getting inserted as 123 (Instead i want this to be inserted as 123.00)
3) 123.50000 It's getting inserted as 123.5 (Instead i want this to be inserted as 123.50)
Can you please let me know how can i achieve it to insert any number(decimal or whole number) from the flat file as 2 decimal places in the custom table column.
Thanks in advance.

Please do not post duplicates -- To update the date for the first of the month

'File in Use' message is received when one user is in the report and another user tries to open the Excel template

‘File in Use’ message is received when one user is in the report and another user tried to open the excel template. how to make excel template shared for multiple users so the users don’t see the ‘File in Use’ message?

Hi Febin,
In addition to others’ replies, we can create a shared workbook and place it on a network location where several people can
edit the contents simultaneously. For example, if the people in your work group each handle several projects and need to know the status of each other's projects, the group can use a shared workbook to track the status of the projects. All persons involved
can then enter the information for their projects in the same workbook.
Regarding how to do this,
the following article can be referred to reference.
Use a shared workbook to collaborate
http://office.microsoft.com/en-in/excel-help/use-a-shared-workbook-to-collaborate-HP010096833.aspx
Best regards,
Frank Shen

Report header disappered for one user for all the reports

Hello All,
For one of my user the report header is disappered - for all reports he will execute.
for all other users - they can see the header.
How to solve this issue ?
Thanks and Regards
JJ

it was related to SAP GUI - solution was to reinstall SAP GUI

Changing the Decimal places in the currency

Hi all
we are using the currecy SAR. Decimal places was set to 4, now that they want to revert back to 2 decimal places. i understand that by doing so they would be inconsistencies in the data allready recorded. how to avoid that?
is there any programmes / reports that would fix such inconsistencies?
any OSS notes?
thanks and regards
gkk

HI,
You should NOT change the decimal places in a productive system.
If you would do, the correction of the posted documents afterwards would be a remote consulting issue. Which you have to pay for SAP.
You see, all posting you have done until now, would get displayed in a wrong way, and the new posting wouldn't compare to the others.
Please check the note 137626 describes this.
If you really need to change the decimals, you should create a new currency type, for example your current is SAR, and now you should create a SA2. Then you should enter new rations and exchange rates for it, and work with the new one.
Also if you want to set the decimals to two digits from four, youshould not enter an entry in the OY04(TCURX).
In this table you can only enter a value, that discriminate from 2 decimals. If there is no entry in the table, it means the currency has two decimals.
Please assign points if it useful.
Regards
Ravinagh Boni

How to change the decimal places in the value axis of a chart in WAD?

Hello,
The key figure in my chart has 2 decimal places and I want the value axis to show the same. How to do that?
Thanks in advance, Nathalie

Hi,
change the Format property of the ValueAxis-Line to 0.00
Then the axis displays its values including two digits after the decimal.
Regards, Kai

HT201441 i got a iphone 4s and the owner show me working i updated it and asking for id but he has moved over seas as in the army help please

hi need to turn off find my phone on my iphone 4s i got off friend who has moved over seas because of army help please

I'm afraid no one can help you but the previous owner, who must erase the phone and remove it from their account as explained here: http://support.apple.com/kb/TS4515. All you can do is keep trying to contact the friend you gave it to you.

B1 Query returning truncated decimal places when the CASE statement is used

Hi All,
Perhaps this is a friday thing.
In B1 the price setting is for 5 decimal places. I have a query the run a business process looking at the data in the Special Prices Tables. When I run the Query in SQL, the output show the correct number of decimal places. However, when the Query is then saved and run in B1, the output is truncated to 2 decimal places. Any ideas as to how I can prevent this for happening?
T0: Points to teh OSPP Table
T1: Points to the OSP1 Table
The portion of the query causing the issue is as follows:
case
   when (T1.price is not null) then
         T1.price
   else
       T0.price
end

Hi Earl
Seems you are right, I have tested with a few different formats and each time get a 2 decimal result. In SQL help I found the following which may explain why:
Result Types
Returns the highest precedence type from the set of types in result_expressions and the optional else_result_expression. For more information, see Data Type Precedence (Transact-SQL).
Even tried it in SQL with a stored procedure storing to a temp table and it shows the full decimals, but executing the SP in SAP Business One results in 2 decimals again.
This is indeed a strange occurrence and I a not sure how you are going to solve it! You can use NVARCHAR for example except that it right aligns the values returned, but at least it doesn't drop the decimals.
Kind regards
Peter Juby

Amount has moved one decimal place in the report

Similar Messages

Maybe you are looking for