AMOUNT IN BACK GROUND

Hi friends, i got some problem in alv grid while i am running it in back ground.
my report contains some currency(amount) field in out put. when i am removing the amount field it is good result in back ground. but when it consist of amount field it is giving error. it indicating some string length problem. and error analysis as follows.
Error analysis
In statement
"STRLEN( obj )..."
the argument "obj" can only take a character-type data object.
In this case, the operand "obj" has the non-character type "P".
pls tell me can't we run amount field in back ground. if s how to solve my error. pls give me some ideas.
Kumar.

Hi,
     Refer the below theard and see the answer of <b>Charles Folwell</b>
https://forums.sdn.sap.com/click.jspa?searchID=4021002&messageID=209473
<b>Reward points</b>
Regards

Similar Messages

  • ALV Grid in back ground

    Hi friends,  i got some problem in alv grid while i am running it in back ground.
      my report contains some currency(amount)  field in out put. when i am removing the amount field it is good result in back ground. but when it consist of amount field it is giving error. it indicating some string length problem. and error analysis as follows.
    Error analysis
    In statement
       "STRLEN( obj )..."
    the argument "obj" can only take a character-type data object.
    In this case, the operand "obj" has the non-character type "P".
      pls tell me can't we run amount field in back ground. if  s  how to solve my error. pls give me some ideas.
                                      Kumar.

    Hi
    Many a times there is a requirement to display ALV Grid (not ALV List) in the background Job. I have checked the SDN Forum for the same and it has been mentioned that ALV Grid cannot be displayed in Background, but the list output of ALV is possible. So user won’t have the actual Grid interface but the List interface.
    There is a workaround to display ALV Grid in Background Job. The only restriction is you can’t schedule the job through SM36. You need to execute the transaction of the report program, fill in the selection screen data and hit Execute.
    The job would be executed in background. User will be able to see the Job Log and Job Status after executing the program. User doesn’t have to go to SM37 to view the job status/log. Once the Job Status is changed to “COMPLETED”, user can click on “DISPLAY SPOOL” to view the ALV Grid.
    /people/prashant.patil12/blog/2007/02/20/displaying-alv-grid-in-background-job

  • Back ground job - report, is scheduled 49 hrs ago, still ACTIVE??

    Hi Experts,
    Pls. clarify one of my simple doubt that, Weather a report(which has only one SELECT statement, with key in WHERE clause) wuld take 49 hours to execute? bcoz, I scheduled a back ground job for my_report, 49 hours ago, its still ACTIVE, OR does it went to infinitive loop?
    thanq

    Hi
    no one select query won't take that mucj of time
    may be that program went in infinite loop
    please check with that
    reward if useful
    <b>below is the best way to write a select query</b>
    Ways of Performance Tuning
    1.     Selection Criteria
    2.     Select Statements
    •     Select Queries
    •     SQL Interface
    •     Aggregate Functions
    •     For all Entries
    Select Over more than one Internal table
    Selection Criteria
    1.     Restrict the data to the selection criteria itself, rather than filtering it out using the ABAP code using CHECK statement. 
    2.     Select with selection list.
    Points # 1/2
    SELECT * FROM SBOOK INTO SBOOK_WA.
      CHECK: SBOOK_WA-CARRID = 'LH' AND
             SBOOK_WA-CONNID = '0400'.
    ENDSELECT.
    The above code can be much more optimized by the code written below which avoids CHECK, selects with selection list
    SELECT  CARRID CONNID FLDATE BOOKID FROM SBOOK INTO TABLE T_SBOOK
      WHERE SBOOK_WA-CARRID = 'LH' AND
                  SBOOK_WA-CONNID = '0400'.
    Select Statements   Select Queries
    1.     Avoid nested selects
    2.     Select all the records in a single shot using into table clause of select statement rather than to use Append statements.
    3.     When a base table has multiple indices, the where clause should be in the order of the index, either a primary or a secondary index.
    4.     For testing existence , use Select.. Up to 1 rows statement instead of a Select-Endselect-loop with an Exit. 
    5.     Use Select Single if all primary key fields are supplied in the Where condition .
    Point # 1
    SELECT * FROM EKKO INTO EKKO_WA.
      SELECT * FROM EKAN INTO EKAN_WA
          WHERE EBELN = EKKO_WA-EBELN.
      ENDSELECT.
    ENDSELECT.
    The above code can be much more optimized by the code written below.
    SELECT PF1 PF2 FF3 FF4 INTO TABLE ITAB
        FROM EKKO AS P INNER JOIN EKAN AS F
          ON PEBELN = FEBELN.
    Note: A simple SELECT loop is a single database access whose result is passed to the ABAP program line by line. Nested SELECT loops mean that the number of accesses in the inner loop is multiplied by the number of accesses in the outer loop. One should therefore use nested SELECT loops  only if the selection in the outer loop contains very few lines or the outer loop is a SELECT SINGLE statement.
    Point # 2
    SELECT * FROM SBOOK INTO SBOOK_WA.
      CHECK: SBOOK_WA-CARRID = 'LH' AND
             SBOOK_WA-CONNID = '0400'.
    ENDSELECT.
    The above code can be much more optimized by the code written below which avoids CHECK, selects with selection list and puts the data in one shot using into table
    SELECT  CARRID CONNID FLDATE BOOKID FROM SBOOK INTO TABLE T_SBOOK
      WHERE SBOOK_WA-CARRID = 'LH' AND
                  SBOOK_WA-CONNID = '0400'.
    Point # 3
    To choose an index, the optimizer checks the field names specified in the where clause and then uses an index that has the same order of the fields . In certain scenarios, it is advisable to check whether a new index can speed up the performance of a program. This will come handy in programs that access data from the finance tables.
    Point # 4
    SELECT * FROM SBOOK INTO SBOOK_WA
      UP TO 1 ROWS
      WHERE CARRID = 'LH'.
    ENDSELECT.
    The above code is more optimized as compared to the code mentioned below for testing existence of a record.
    SELECT * FROM SBOOK INTO SBOOK_WA
        WHERE CARRID = 'LH'.
      EXIT.
    ENDSELECT.
    Point # 5
    If all primary key fields are supplied in the Where condition you can even use Select Single.
    Select Single requires one communication with the database system, whereas Select-Endselect needs two.
    Select Statements           contd..  SQL Interface
    1.     Use column updates instead of single-row updates
    to update your database tables.
    2.     For all frequently used Select statements, try to use an index.
    3.     Using buffered tables improves the performance considerably.
    Point # 1
    SELECT * FROM SFLIGHT INTO SFLIGHT_WA.
      SFLIGHT_WA-SEATSOCC =
        SFLIGHT_WA-SEATSOCC - 1.
      UPDATE SFLIGHT FROM SFLIGHT_WA.
    ENDSELECT.
    The above mentioned code can be more optimized by using the following code
    UPDATE SFLIGHT
           SET SEATSOCC = SEATSOCC - 1.
    Point # 2
    SELECT * FROM SBOOK CLIENT SPECIFIED INTO SBOOK_WA
      WHERE CARRID = 'LH'
        AND CONNID = '0400'.
    ENDSELECT.
    The above mentioned code can be more optimized by using the following code
    SELECT * FROM SBOOK CLIENT SPECIFIED INTO SBOOK_WA
      WHERE MANDT IN ( SELECT MANDT FROM T000 )
        AND CARRID = 'LH'
        AND CONNID = '0400'.
    ENDSELECT.
    Point # 3
    Bypassing the buffer increases the network considerably
    SELECT SINGLE * FROM T100 INTO T100_WA
      BYPASSING BUFFER
      WHERE     SPRSL = 'D'
            AND ARBGB = '00'
            AND MSGNR = '999'.
    The above mentioned code can be more optimized by using the following code
    SELECT SINGLE * FROM T100  INTO T100_WA
      WHERE     SPRSL = 'D'
            AND ARBGB = '00'
            AND MSGNR = '999'.
    Select Statements       contd…           Aggregate Functions
    •     If you want to find the maximum, minimum, sum and average value or the count of a database column, use a select list with aggregate functions instead of computing the aggregates yourself.
    Some of the Aggregate functions allowed in SAP are  MAX, MIN, AVG, SUM, COUNT, COUNT( * )
    Consider the following extract.
                Maxno = 0.
                Select * from zflight where airln = ‘LF’ and cntry = ‘IN’.
                 Check zflight-fligh > maxno.
                 Maxno = zflight-fligh.
                Endselect.
    The  above mentioned code can be much more optimized by using the following code.
    Select max( fligh ) from zflight into maxno where airln = ‘LF’ and cntry = ‘IN’.
    Select Statements    contd…For All Entries
    •     The for all entries creates a where clause, where all the entries in the driver table are combined with OR. If the number of entries in the driver table is larger than rsdb/max_blocking_factor, several similar SQL statements are executed to limit the length of the WHERE clause.
         The plus
    •     Large amount of data
    •     Mixing processing and reading of data
    •     Fast internal reprocessing of data
    •     Fast
         The Minus
    •     Difficult to program/understand
    •     Memory could be critical (use FREE or PACKAGE size)
    Points to be must considered FOR ALL ENTRIES
    •     Check that data is present in the driver table
    •     Sorting the driver table
    •     Removing duplicates from the driver table
    Consider the following piece of extract
    Loop at int_cntry.
           Select single * from zfligh into int_fligh
    where cntry = int_cntry-cntry.
    Append int_fligh.
    Endloop.
    The above mentioned can be more optimized by using the following code.
    Sort int_cntry by cntry.
    Delete adjacent duplicates from int_cntry.
    If NOT int_cntry[] is INITIAL.
                Select * from zfligh appending table int_fligh
                For all entries in int_cntry
                Where cntry = int_cntry-cntry.
    Endif.
    Select Statements    contd…  Select Over more than one Internal table
    1.     Its better to use a views instead of nested Select statements.
    2.     To read data from several logically connected tables use a join instead of nested Select statements. Joins are preferred only if all the primary key are available in WHERE clause for the tables that are joined. If the primary keys are not provided in join the Joining of tables itself takes time.
    3.     Instead of using nested Select loops it is often better to use subqueries.
    Point # 1
    SELECT * FROM DD01L INTO DD01L_WA
      WHERE DOMNAME LIKE 'CHAR%'
            AND AS4LOCAL = 'A'.
      SELECT SINGLE * FROM DD01T INTO DD01T_WA
        WHERE   DOMNAME    = DD01L_WA-DOMNAME
            AND AS4LOCAL   = 'A'
            AND AS4VERS    = DD01L_WA-AS4VERS
            AND DDLANGUAGE = SY-LANGU.
    ENDSELECT.
    The above code can be more optimized by extracting all the data from view DD01V_WA
    SELECT * FROM DD01V INTO  DD01V_WA
      WHERE DOMNAME LIKE 'CHAR%'
            AND DDLANGUAGE = SY-LANGU.
    ENDSELECT
    Point # 2
    SELECT * FROM EKKO INTO EKKO_WA.
      SELECT * FROM EKAN INTO EKAN_WA
          WHERE EBELN = EKKO_WA-EBELN.
      ENDSELECT.
    ENDSELECT.
    The above code can be much more optimized by the code written below.
    SELECT PF1 PF2 FF3 FF4 INTO TABLE ITAB
        FROM EKKO AS P INNER JOIN EKAN AS F
          ON PEBELN = FEBELN.
    Point # 3
    SELECT * FROM SPFLI
      INTO TABLE T_SPFLI
      WHERE CITYFROM = 'FRANKFURT'
        AND CITYTO = 'NEW YORK'.
    SELECT * FROM SFLIGHT AS F
        INTO SFLIGHT_WA
        FOR ALL ENTRIES IN T_SPFLI
        WHERE SEATSOCC < F~SEATSMAX
          AND CARRID = T_SPFLI-CARRID
          AND CONNID = T_SPFLI-CONNID
          AND FLDATE BETWEEN '19990101' AND '19990331'.
    ENDSELECT.
    The above mentioned code can be even more optimized by using subqueries instead of for all entries.
    SELECT * FROM SFLIGHT AS F INTO SFLIGHT_WA
        WHERE SEATSOCC < F~SEATSMAX
          AND EXISTS ( SELECT * FROM SPFLI
                         WHERE CARRID = F~CARRID
                           AND CONNID = F~CONNID
                           AND CITYFROM = 'FRANKFURT'
                           AND CITYTO = 'NEW YORK' )
          AND FLDATE BETWEEN '19990101' AND '19990331'.
    ENDSELECT.
    1.     Table operations should be done using explicit work areas rather than via header lines.
    2.     Always try to use binary search instead of linear search. But don’t forget to sort your internal table before that.
    3.     A dynamic key access is slower than a static one, since the key specification must be evaluated at runtime.
    4.     A binary search using secondary index takes considerably less time.
    5.     LOOP ... WHERE is faster than LOOP/CHECK because LOOP ... WHERE evaluates the specified condition internally.
    6.     Modifying selected components using “ MODIFY itab …TRANSPORTING f1 f2.. “ accelerates the task of updating  a line of an internal table.
    Point # 2
    READ TABLE ITAB INTO WA WITH KEY K = 'X‘ BINARY SEARCH.
    IS MUCH FASTER THAN USING
    READ TABLE ITAB INTO WA WITH KEY K = 'X'.
    If TAB has n entries, linear search runs in O( n ) time, whereas binary search takes only O( log2( n ) ).
    Point # 3
    READ TABLE ITAB INTO WA WITH KEY K = 'X'. IS FASTER THAN USING
    READ TABLE ITAB INTO WA WITH KEY (NAME) = 'X'.
    Point # 5
    LOOP AT ITAB INTO WA WHERE K = 'X'.
    ENDLOOP.
    The above code is much faster than using
    LOOP AT ITAB INTO WA.
      CHECK WA-K = 'X'.
    ENDLOOP.
    Point # 6
    WA-DATE = SY-DATUM.
    MODIFY ITAB FROM WA INDEX 1 TRANSPORTING DATE.
    The above code is more optimized as compared to
    WA-DATE = SY-DATUM.
    MODIFY ITAB FROM WA INDEX 1.
    7.     Accessing the table entries directly in a "LOOP ... ASSIGNING ..." accelerates the task of updating a set of lines of an internal table considerably
    8.    If collect semantics is required, it is always better to use to COLLECT rather than READ BINARY and then ADD.
    9.    "APPEND LINES OF itab1 TO itab2" accelerates the task of appending a table to another table considerably as compared to “ LOOP-APPEND-ENDLOOP.”
    10.   “DELETE ADJACENT DUPLICATES“ accelerates the task of deleting duplicate entries considerably as compared to “ READ-LOOP-DELETE-ENDLOOP”.
    11.   "DELETE itab FROM ... TO ..." accelerates the task of deleting a sequence of lines considerably as compared to “  DO -DELETE-ENDDO”.
    Point # 7
    Modifying selected components only makes the program faster as compared to Modifying all lines completely.
    e.g,
    LOOP AT ITAB ASSIGNING <WA>.
      I = SY-TABIX MOD 2.
      IF I = 0.
        <WA>-FLAG = 'X'.
      ENDIF.
    ENDLOOP.
    The above code works faster as compared to
    LOOP AT ITAB INTO WA.
      I = SY-TABIX MOD 2.
      IF I = 0.
        WA-FLAG = 'X'.
        MODIFY ITAB FROM WA.
      ENDIF.
    ENDLOOP.
    Point # 8
    LOOP AT ITAB1 INTO WA1.
      READ TABLE ITAB2 INTO WA2 WITH KEY K = WA1-K BINARY SEARCH.
      IF SY-SUBRC = 0.
        ADD: WA1-VAL1 TO WA2-VAL1,
             WA1-VAL2 TO WA2-VAL2.
        MODIFY ITAB2 FROM WA2 INDEX SY-TABIX TRANSPORTING VAL1 VAL2.
      ELSE.
        INSERT WA1 INTO ITAB2 INDEX SY-TABIX.
      ENDIF.
    ENDLOOP.
    The above code uses BINARY SEARCH for collect semantics. READ BINARY runs in O( log2(n) ) time. The above piece of code can be more optimized by
    LOOP AT ITAB1 INTO WA.
      COLLECT WA INTO ITAB2.
    ENDLOOP.
    SORT ITAB2 BY K.
    COLLECT, however, uses a hash algorithm and is therefore independent
    of the number of entries (i.e. O(1)) .
    Point # 9
    APPEND LINES OF ITAB1 TO ITAB2.
    This is more optimized as compared to
    LOOP AT ITAB1 INTO WA.
      APPEND WA TO ITAB2.
    ENDLOOP.
    Point # 10
    DELETE ADJACENT DUPLICATES FROM ITAB COMPARING K.
    This is much more optimized as compared to
    READ TABLE ITAB INDEX 1 INTO PREV_LINE.
    LOOP AT ITAB FROM 2 INTO WA.
      IF WA = PREV_LINE.
        DELETE ITAB.
      ELSE.
        PREV_LINE = WA.
      ENDIF.
    ENDLOOP.
    Point # 11
    DELETE ITAB FROM 450 TO 550.
    This is much more optimized as compared to
    DO 101 TIMES.
      DELETE ITAB INDEX 450.
    ENDDO.
    12.   Copying internal tables by using “ITAB2[ ] = ITAB1[ ]” as compared to “LOOP-APPEND-ENDLOOP”.
    13.   Specify the sort key as restrictively as possible to run the program faster.
    Point # 12
    ITAB2[] = ITAB1[].
    This is much more optimized as compared to
    REFRESH ITAB2.
    LOOP AT ITAB1 INTO WA.
      APPEND WA TO ITAB2.
    ENDLOOP.
    Point # 13
    “SORT ITAB BY K.” makes the program runs faster as compared to “SORT ITAB.”
    Internal Tables         contd…
    Hashed and Sorted tables
    1.     For single read access hashed tables are more optimized as compared to sorted tables.
    2.      For partial sequential access sorted tables are more optimized as compared to hashed tables
    Hashed And Sorted Tables
    Point # 1
    Consider the following example where HTAB is a hashed table and STAB is a sorted table
    DO 250 TIMES.
      N = 4 * SY-INDEX.
      READ TABLE HTAB INTO WA WITH TABLE KEY K = N.
      IF SY-SUBRC = 0.
      ENDIF.
    ENDDO.
    This runs faster for single read access as compared to the following same code for sorted table
    DO 250 TIMES.
      N = 4 * SY-INDEX.
      READ TABLE STAB INTO WA WITH TABLE KEY K = N.
      IF SY-SUBRC = 0.
      ENDIF.
    ENDDO.
    Point # 2
    Similarly for Partial Sequential access the STAB runs faster as compared to HTAB
    LOOP AT STAB INTO WA WHERE K = SUBKEY.
    ENDLOOP.
    This runs faster as compared to
    LOOP AT HTAB INTO WA WHERE K = SUBKEY.
    ENDLOOP.

  • What happens in the back ground when you schedule a Sales Order?

    Gurus,
    What happens in the back ground when you schedule a Sales Order?
    Assemble to Order scenario.
    Edited by: 792050 on May 17, 2011 3:24 AM
    Edited by: 792050 on May 17, 2011 3:24 AM

    If I merge libraries and then back the merged libraries up onto an external drive or DVD, do I just back up the libraries themselves, or do I also back up the original files?
    If you're running a Managed Library, then backing up the Library also backs up the original files.
    I ask because my HDD is getting pretty full. I want to reduce the amount of stuff on it, and the iPhoto libraries are the biggest single consumer of space at the moment (Nearly 100GB).
    1. Quit iPhoto
    2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
    Regards
    TD
    P.s. If you're running a Managed library, then it's the default setting, and iPhoto copies files into the iPhoto Library when Importing
    If you're running a Referenced Library, then you made a change at iPhoto -> Preferences -> Advanced and iPhoto is NOT copying the files into the iPhoto Library when importing.

  • How To Handle With Back Ground JOB From WEBUI When Click On "Appove"

    Hi
    How To Scheduled A Job Through ABAP Report In back end  Of CRM when i click on "Approve" Button in WEBUI  From result list.
    As per My requirement I have a Search View and Result View
    In Search View I have  Below Fields
    ITC Vendor ID    
    Claim Status
    User status (date status changed)
    Model
    Serial Number
    Date completed of Service Completion
    Based on Search Criteria I will get Result In Result View.(Suppose 10 Records I got In Result View)
    In the Result View I need to Add one Button As "Approve"
    When i Click On Approve button One Pop up Message Need to Open And In that popup window I need to Display Below Text
    "Approve  Claim Job Has Started In Background  
    Note: Only Claims Which are in Submitted  Status  Will be  Approved. you May Close This Window"
    In SAP CRM System  Back Ground Job Need To Start When Click On "Approve" Button In WEBUI .
    In the Back Ground ABAP Report which will validate based on Result List Records"
    In the Result List we may have all types of Claims which are status in "Submitted" "Pending" "Rejected" "Approve".
    I need to collect all records from Result list and validate Those Records who's Status in "Submitted
    1)Sort all the claims based on ITC Vendor ID.
    2)Grouped all the submitted claims against each ITC Vendor ID from the search result
    3)Change the status of the selected submitted claims to Approved.
    4)Displays information messages as mentioned whenever a claim is approved, the same message will be captured in the job log.
    ‘Claims <ClaimID 1>,…<ClaimID N> now approved for ITC Vendor ID’.
    5)Sending Email to each IRC.
    6)Capture all the approved claims in the below format (Format Attached "Screen Shot Attachment")
    7)Store the file in the Application Server AL11 in .csv format
    Please Find Attachement For Reference.
    1)ITC Claim Screen Shot
    2)Screen Shot For Attachment
    Thanks
    Raj

    Hi,
    You can add the following code in on approve method to show popup to the user,
    IF req_edit IS NOT BOUND. " gloabl attribute in impl class of the view
        REFRESH lt_buttons.
        lss_button-id  = 'btnyes'.
        lss_button-text = 'YES'.
        lss_button-on_click = 'YES'.
        APPEND lss_button TO lt_buttons.
        CLEAR lss_button.
        lss_button-id  = 'btnno'.
        lss_button-text = 'NO'.
        lss_button-on_click = 'NO'.
        APPEND lss_button TO lt_buttons.
        CLEAR lss_button.
        CALL METHOD comp_controller->window_manager->create_popup_2_confirm
          EXPORTING
            iv_title          = 'ATTENTION'
            iv_text           = 'Are you sure you want to edit this document?'
            iv_btncombination = '99'
            iv_custombuttons  = lt_buttons
          RECEIVING
            rv_result         = req_edit.
        req_edit->set_on_close_event( iv_event_name = 'EDIT' iv_view = me ). "#EC NOTEXT
        req_edit->open( ).
        RETURN.
      ELSE.
        lr_node ?= req_edit->get_context_node( 'OUTPUTNODE' ).
        lv_outbound = lr_node->get_event_name( ).
    *  CLEAR ptc_pricing_status.
    *    lv_outbound = req_edit->get_fired_outbound_plug( ).
        IF lv_outbound = 'YES'.
    you can use the submit report code here and you can al the validations here
        ELSE. " No
    if user clicks no nothing to do..
        ENDIF.
        CLEAR req_edit.
      ENDIF.
    Best Regards,
    Dharmakasi.

  • How to find the back ground job details

    Hi All,
       I have a back ground  job running from many days, now we would like to know when this job was created on what date this job actvlly created and schuduled.
               Please informe me how to check this.
    Thanks & Regards,
    Muralikrishna

    On SM37 screen there is plenty of options are there:
    This is what i got from SAP help
    Explanation for each selection field:                                                                               
    o   Jobname: Name of the job as an identifier.                                                                               
    o   Username: Name of the user who designed and planned the job.                                                                               
    o   Start date: The start condition of the job, which could be a time 
    frame or an event that the job is waiting for. Specifying both will   
    yield jobs whose starting condition is  either of the two             
    conditions.                                                                               
    ABAP program step: Name of an ABAP program that acts as a step in a   
    job.                                                                               
    Status selection: The current status of the job. By default, the      
    SCHEDULED option is not marked. To see the scheduled jobs, you must   
    explicitly check this.
    also give the proper values in Job Satus also.

  • Any restictions on back ground job when submit the session?

    Hello friends
    below is my code part. problem is when i execute this program in back ground the data is not picking from APQI. but in fore ground it is picking . for this SESSION submission in back ground am i missing any thing here. please suggest me , any restiction is their in back ground? if possible please send a sample code to submit SESSION automatically in background.
        SUBMIT rsbdcsub AND RETURN
                        USER sy-uname
                        WITH mappe    =  p_group
                        WITH von      =  sy-datum
                        WITH bis      =  sy-datum
                        WITH z_verarb =  'X' .
          SELECT userid credate groupid qstate FROM apqi
             INTO TABLE it_apqi
             WHERE userid  = sy-uname
             AND   credate = sy-datum
             AND   groupid = p_group
             AND   qstate  = 'E'.              "Only look for 'Error' status
       DESCRIBE TABLE it_apqi[] LINES temp.

    Codes for Submitting the session through RSBDCSUB (via Job)...
    " The function module JOB_OPEN is called to create the job.
        call function 'JOB_OPEN'
             exporting
                  delanfrep        = 'X'  "Delete job after execution
                  jobname        = fv_jobname  "Job name
             importing
                  jobcount         = fv_jobcount  "Internally generated
             exceptions
                  cant_create_job  = 1
                  invalid_job_data = 2
                  jobname_missing  = 3
                  others           = 4.
        if sy-subrc = 0.
          submit rsbdcsub
                 with       mappe = v_filec
                 with            von = sy-datum      "From
                 with            bis = sy-datum      "To
                 with     z_verarb = 'X'
                 with         fehler = ' '
                 with      batchsys = space
                 with         logall = ' '
                 via  job          fv_jobname
                      number       fv_jobcount
                 and return.
          call function 'JOB_CLOSE'
               exporting
                    jobcount             = fv_jobcount
                    jobname              = fv_jobname
                    strtimmed            = 'X'
               exceptions
                    cant_start_immediate = 1
                    invalid_startdate    = 2
                    jobname_missing      = 3
                    job_close_failed     = 4
                    job_nosteps          = 5
                    job_notex            = 6
                    lock_failed          = 7
                    others               = 8.
    Hope this helps!
    Edited by: Vin on Jun 4, 2009 10:58 AM

  • Problem in Back Ground Job

    Hi Experts,
    I want to execute a program in Back ground but my program has selectionscreen.
    I don't want to Provide Variant for this screen that's why i am passing these values Thru INITILIZATION event.
    But Background is not moving forward. It is waiting for I/p.
    Can you please help me on this.
    Thanks,
    Murali Krishna K

    Murali,
    For a program to be executed in background you need to create a variant and provide the variant name in the def. of the background job. giving the values at INITIALIZATION  will NOT work.
    On the second thought, you might have declared your parameters as OBLIGATORY. Take out that and make them optional. Now you schedule this in background without a variant and give the values in the INITILIZATION event.
    Regards,
    Ravi
    Note : Please close the thread of the issue is resolved.
    Message was edited by: Ravikumar Allampallam

  • Scheduling Back Ground job

    Hi All,
    I need to schedule a daily background job for MB52 transaction and need to save the output of MB52 in a specified directory .
    Can any one tell me whether it is possible to save back ground job output in specified directory?
    Thanks & Regards
    k.Nirmala

    Hi Nirmala,
    Set up variant at MB52 transaction and use SM37 and Sm36 transaction to schedule job.
    Define job at Sm36 and use program - RM07MLBS and use your variant.
    schedule job and set up time and date for periodcally.
    and it will run and you can see the status at SM37 Transaction .
    the background job will create spool and which will contain your output.
    if you want to download your output ,then you need to write custom program to get spool information from TSP01 table and use open dataset command to down load specifi directory.
    Reward Points if it is helpful
    Thanks
    Seshu

  • Set back ground color to a particular cell in table view

    hi,
        iam working on a jspDynpage and have a htmlb table view for which i need a way to set back ground color to a particular cell in table view, the color has to be set based on a value..is there a way to do it without using an iterator...well iam using a  cellRenderer for the table but cant find a way to set the colors...if anyone does have a way please do reply...regards

    You can mention the color in <b>textview</b> as well as <b>Label as follows:</b>
          <htmlb:textView     text          = "<span style='background-color: #00FF00'>My Textview</span>"
                              design        = "EMPHASIZED" />
          <htmlb:label for =  "MyLabel"
                       text = "<span style='background-color: #00FF00'>Label </span>"
                       encode = "false"/>
    Reward each helpful answer
    Raja T
    Message was edited by:
            Raja Thangamani

  • How to Run a Custom Transaction in Back Ground after give the Input?

    Hi,
        I have problem that how to execute a Custom Transaction in Back Ground after end user will save a variant for input. In my Transaction there is no menu to save a Variant & to Execute in Back Ground.
    Please suggest me how to do this in my Custom Transaction.

    Hi Ramana,
    what kind of report you want to  execute? the report is Executable Report or Modulepool prog. ??
    if it is a executable program so when u execute (F8) from SE38 when u find the selection-screen in the menu bar ->Program ->Execute in Background( F9) option exits there u can schedule your report in Background or else use toce SM36 ( Define Background Job).
    Why you want to run it in background with transaction code if you have this options?
    Regards,
    Sunil kairam.

  • ERROR IN BDC SESSION BACK GROUND ( USING PP03 T.CODE)

    Hi Experts,
    When i am executing the session ( pp03 T.Code) ,it is working fine in fore ground as well as in display errors mode. But it is not working in back ground mode.
    it is raising the exception ( cntl-system-error).
    I used flat file which is in the presentation server . I accessed it by gui_upload Function Module.
    <b> I am also getting the error using data sets . After upload the presentation server data into one internal table .I sent it to application server using open data set ( transfer ) , after that i read the application server data using open dataset ( read )
    into another internal table ( i declared with same structure of flat file ) .</b>
    But this time also it is giving same error ( runtime exception).
    Please tell me how can i handle using datasets .  Its Very urgentttttttt
    Please any body help meee ( If any one worked on this (pp03 T.code) ) .
    Send the code  or Inform the full detailsss as soon as possibleeee
    regards ,
    dattu malge.

    Hi,
    Go to the transaction SM35 and select your session and then click the Process Button.
    Here you select the Processing Mode as "Background".
    It is not possible to execute the same session by more than one user at a same time.
    RSBDCSUB is used to automate the processing of Batch input session.
    Cheers,
    Hakim

  • Error while activating ODS is not caught in the back ground job..

    Hi All,
    We have a back ground job to load data to ODS and to activate it..If there is any error while loading or activating the data, back ground job is going into loop instead of cancelling the job..As the job is going into loop we are unable to trace the error unless we cancel the job manually and checking it..We have switched off displaying any messages while doing the back ground job...also we can not set any time limit for the job as it always depends on the volume of the data.
    My requirement is , back ground job must get cancelled if there is any error while loading the ODS..Can anybody suggest any idea on this..
    Thanks for reading.
    Umamaheswar kumar

    Hi Uma,
    A few hints for running and schedule and monitoring process chains:
    - always schedule the process chain in tcode RSPC
    - check the log in RSPC for error messages, or
    - check BW monitor for the ODS concerned (tcode RSMO, tab Details)
    if anything is not working fine, the status of the corresponding load will show you the errors, warnings ...
    either in RSPC - log or RSMO.
    hope it helps.
    Regards,
    Lilly

  • BAPI_DOCUMENT_CREATE2 - Document upload to DMS - Back ground

    Hi,
    We are trying to uploda a file into DMS(CV01N) from SAP R/3, BAPI 'BAPI_DOCUMENT_CREATE2'. This works fine in foregroung but when we ececute it in background, we get an error saying 'Error while checking in and storing'.
    Could anyone please suggest me if we can sucessfully execute in back ground mode?
    Thanks,
    Ranjith Singh.

    it is not possible to download in background to a presentation server (your local PC) hence it is not possbile to upload either.
    when you submit the program to the background thenthe session is no longer attached to the PC that created it.
    Because of this you have to go via the application server.
    compare hundred of threads by searcing the ABAP forum with keywords +download +background
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0901cba-f49e-2910-748c-d7ce4c0c4c1c

  • Error in Back Ground processing of a report.

    Hi All,
    I have a report wherein I need to schedule it in background. Its an ALV report and it has got user defined GUI status. But for one of the selection options, only output is being displayed. Can this be scheduled in Back Ground?

    Hi all,
    Thanks for your reply.
    I  got the solution. When a program is scheduled in background, if it is written in classes and ALV grid display is used, we get this error. I am able to schedule when I change the function module to LIST_DISPLAY.

Maybe you are looking for