Amount in Local Currency Field not showing up under PO history tab

Hi Freinds,
I have faced a strange situation where one of the Business user can see the field Amount in Local currency under PO history tab , however the other user can not see this field.
When the second user( who can not see this field) checked for the Layout Settings, the field Amount in Local currency is not present there also.
Kindly guide me what needs to be done for the second user to be able to see the needed field.
A quick reply will be highly appreciated
Thanks& Regards,
Anshul

Hi Jain,
The issue was realted to authorisation, if you have chekced the layout and it doesnt concern the layout settings then ask BASIS to provide authorisation to the user who is not able to see amoutn in local currency field under PO History tab
Cheers,
Anshul

Similar Messages

My downloaded text sounds do not show up under the sounds tab in settings after installing 8.1.1. can someone help me please?

i downloaded a couple text tones and since installing 8.1.1, they will not show up under the sounds tab. in fact, they do not show up in my recent purchases on itunes, but when i go to buy them again, it says that i have already bought this tone. I just want to use the tones i paid for as the tones on my phone. not asking much.... thanks for the help. i hope someone can help me get the tones working. thank you.

This was happening to me too but only for some of my songs. I have a mac so I dunno about PCs, but for most of my ringtones I had to create an ACC version in itunes to make them short enough then turn that into a m4r and those all worked fine. But if the song was already short enough and I didn't create an ACC version and just turned the original into a m4r, then it wouldn't appear in my itunes.
so if you're on a mac:
1. go to get info, options, pick when you want the song to start and end.
     Has to be pretty short to work, 30 second or less is good
     if it's already short enough that's fine
2. right click and click 'create ACC version'
     a copy with the length you put in will appear, drag that into a folder or whatever and just type in m4r where m4a would be
     still make an ACC version even if it's the right length
Hopefully this helps someone else.

I am trying to download previously purchased music from iTunes, it show "purchased" in iTunes Store but does not show up under previous purchase tab

There are several albums that I've previously purchased that somehow were deleted from my computer & iPad. When I go to download available purchases on PC it say that all available punches have been downloaded. When I check iTunes Store it show as "purchased". When I try to check & download from iCloud via either iPad or PC these items do not show up under items purchased.
I can't even re-purchase the item, which I've tried since it shows as purchased in iTunes Store. This is very troublesome because there is no way for me to access these previous purchases. I have been using iTunes & various Apple products with the iTunes Store for several years & there is a lot of money invested in these previous purchases, that there is no way for me to access. As mentioned, I'd even be willing to re-purchase some of these items (though this should be unnecessary). But, the iTunes Store won't let me, because the items show up as purchased in store, but not on any of my devices!!!
Help!

Hey innerev2003,
Thanks for the question, and welcome to Apple Support Communities.
If, while searching through your past purchases, items are unavailable to download and show a "Purchased" button, they are still on your computer. It may be best to search your iTunes library by clicking Music, then use the search bar at the top right.
If you are completely sure the items are no longer in your library, try signing out of the iTunes Store, and then back in.
iTunes 11 for Windows: Manage your iTunes Store account
http://support.apple.com/kb/PH12507
Thanks,
Matt M.

IPhoto08 Events not showing up under the photo tab in iTunes7.4.2

hi, I just bought the ipod touch and would like to sync some of the events I had organized in my iPhoto7.1. However, all my events are not there in my iTunes. The only syncing options i have are 'Last 12 months' and 'Last Import'. How can I have all the individual events display in iTunes so I can choose the ones I want to sync over to my ipod touch. Pls help. Thanks.
And one more thing, is 'lyrics' no longer supported in the touch? I couldn't find a way to access lyrics in ipod touch...

you just have to make an album and it will show in itunes.

Why is an artist not showing in under the Artists tab on my ipod yet I can choose individual songs on the Songs tab

I would like to listen to my entire Alice in Chains playlist. When I go to the Artists tab to find them, Alice in Chains does not appear. However, if I look for a specific song by them using the Songs tab, I can find each song individually. I am not sure of this is happening with other artists as well, this is the only one I have noticed so far. Not having the search function on this new ipod model is a huge detriment to its functionality, otherwise I could have just searched for Alice in Chains to find their playlist.
As a note: I believe it is something to do with the ipod itself because I have the same songs synched to my Gen 5 ipod and I have no problem pulling Alice in Chains up as an Artist.
Thank you for the help!

Make sure the songs have Artist and album info in the ID tags.

SCCM 2012 Console not showing Updates under Monitoring\Deployments tab

Howdie,
Has anyone ran into this problem? When I go to Monitoring -> Deployments tab in SCCM 2012 console it will show only applications and programs. Update ones are displayed only after 6-8 minutes. The issue is the same in all of our locations
around the world, any hint or this?
Thanks in advance for help

Hi,
You could run the DBCC Showcontig to validate the current fragmentation.
Reference:
http://blogs.technet.com/b/smartinez/archive/2014/03/28/talking-database-in-configmgr.aspx
(Now I cannot unpropose the answer too-unexpected error.)
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Amount in Local Currency not updating when using BAPI_INCOMINGINVOICE_PARK

Hi all,
I am using BAPI_INCOMINGINVOICE_PARK for parking a credit memo. Eventhough the credit memo is parked with amount in document currency, amount in local currency field is not updating.I am passing the amount to item_amount field in the item data table.
Can anyone tell me one solution for this.
Thanks
-Sajith

Hello Chelsea,
I am not sure about your coding. If you are intrested you can try AC_DOCUMENT_DIRECT_INPUT FM it is having many many fields and also having local and global currency fields where you can pass the value.
Thanks,
Amit
Message was edited by: Amit Gupta

"Amount in Local Currency" in MIGO

Hi Experts!
I want to enter value in "Amount in Local Currency" field, in MIGO during Goods Receipt against Purchase Order (101 movement type). "Amount in Local Currency" field is not visible in "Quantity" tab of MIGO during GR. But after GR is posted, in display of material document, it is showing in "Quantity" tab.
I tried to add this filed to movement type 101 in SPRO-MM-IM-Settings for Enjoy Transactions-Field selection per Mvt type. But there is no provision to add "EXBWR" to 101 Mvt type.
Can anyone suggest a solution for this.
Thanks in advance.
Regards,
Sree

Hi Guys,
Thank you very much for your replies.
The requirement is during MIGO (101), system should valuate the stocks with a different price other than the PO price. For this purpose, I want to use the filed "Amount in Local currency" in MIGO. If this field is in input mode during MIGO, we can enter the required price and then stocks will be valuated at this price (like in case of mov type 561, we have the same option). Can we get this filed in MIGO in input mode through any configuration or not? If not through configuraton, any Exit/Badi etc ? Kindly suggest the solution.
Thanks in advance.
Regards,
Sree.

Local currency is not posted into SAP

Hi,
I am using the program 'RFBIBL00' for postings into SAP from leagacy file after validations. For this I am facing one issue.
CURRENCY - USD
AMOUNT - 12345.12 (example)
for this postings , the amount in local currency is not posting into SAP and the amount in local currency is recalculated by SAP at the exchange of system.
Please help me for this how to post local currency into SAP.
regards
SVR

Hi,
Which field in BBSEG structure you are passing the amount field to? Did you use BBSEG-DMBTR?
Regds,
Rudra

Table for Amount in local currency(DMSHB)

hi,
Tell me the table where we can find DMSHB(Amount in local currency) field....
Actually am able to find it in BSIK as DMBTR...... But the values vary....
Is there any other table that has DMSHB....
NOTE: DMSHB is a field in FBL3N screen....
I have to create a report for this screen....
Am not able to find the table for this field...
Can anyone help me?

Moderator message - please open only one thread on the same subject.
Thread locked.
Rob

Amount in local currency in vtbfhapo

dear all,
i realized a new custom program.
In this program i display for each transaction the amount in document and local currency. The amount in local currency in table vtbfhapo related to not posted transaction is = 0.
Could you tell me if there is another field that i can use ?
thanks
Elena

Hi,
Its a standard behaviour. Amount in local currency field is not updated due to technical reasons. You can use TRDV_TRANS_FLOW for getting amount in local currency for relevant transaction number.
Regards
Prasad AV

Amount in local currency showing different value

Hi,
I have one issue where document currency and local currency are same(USD).
After posting the customer document in USD say 1000.00, when i goto FBL5N to check the open items the report is showing the difference of 0.44 (1000.44) in Amount in Local Currency column.
I received payment of 1000.00 usd from the customer.
At the time of clearing the system showing 0.44 difference.
Please guide me how to resolve this issue.
Regards,
Krishna Kishore

Hi,
Not yet. Temporarily i am charging off this difference to expense account.
Regards,
Krishna Kishore

F-03: Amt in doc currency & local currency does not tally

Hello Friends,
When doing clearing using F-03 for GL Account 137500 in SGD (document currency), The amount
does not tally with Amount in local currency (USD) and the selected items
clearing lines not generated automatically. Why is this happening.
I found that this is not due to exchange rate
Please help to resolve.
Ramu

There are too many questions..let us take it one at a time
a. I am using tcode f-03 for clearing GL Account - OK
b. When i process the open items and select the items for clearing OK
c. When posting the difference of the selected items OK
d. the amount in local currency(USD) does not tally with the amount in document currency (SGD)
Response: This will not as the exchange rates are not 1:1 that is One USD will not get you One SGD. The difference will remain.
e. this is not due to the exchange rate, for example the figure in amount in local currency is 100 USD, the figure in the field amount in document currency is showing as 300 SGD,
Response: In all likelihood look at the GL master data `(FS00) and check the values in the `Control Tab`
f. and also automatic generation of lines (debit & credit) for the sum of selected open items are missing
Response:* As in (e) please check if the line item display is checked in the same tab.
Cheers
tkvishwa

TDS Amount in Local currency and document currency

Dear All,
When we deduct TDS amount on Vendor Transactions in foreign currency, the TDS amount is dispalyed only in document curreny(Foreign currency) in T.Code "FBL1N".
Now We want to see the TDS amount in local currency in T.Code "FBL1N". layout when we post TDS transactions in foreign currency(USD). B,caz there is no such fields "Withholding tax amount in local currency" in the change layout.
So, Plz advise me whether it is possible or not ? If Yes, explain me.
If you have any query, plz do let me know.
Thanks in Advance.
Regards,
Kumar.D

Hi Prasad,
In Logistics Invoice Verification, when you enter an invoice in foreign
currency, the system automatically translates the foreign currency
amounts to local currency. The system calculates the exchange rate using
the following rule:
1.If the buyer entered a fixed exchange rate in the purchase order, the
system uses this rate to translate the amounts to local currency.
2.If an exchange rate was entered in Invoice Verification, the system
uses this rate to translate the amounts to local currency.
3.If an exchange rate was entered neither in the purchase order nor in
Invoice Verification, the system uses the exchange rate pre-defined in
Customizing for Financial Accounting valid for the posting date.
Exchange Rate Differences
If a purchase order is entered in foreign currency,the amounts are
translated from foreign currency into local currency at goods receipt.
If you enter the invoice for the purchase order in the foreign currency,
this can lead to currency translation differences between the goods
receipt and the invoice receipt.
How these differences are posted depends on how your system is
configured in Customizing for Invoice Verification
Exchange Rate Rounding Differences
When an invoice is posted in a foreign currency, the amounts are translated into local currency.Since the system rounds off the amounts in each posting line, this can lead to rounding differences due to the currency translation.
These differences are posted to an expense or income account.
Addition in transaction OB22 for the second local currency, it should be defined 'Translation taking transaction currency as a basis' is defined.
Pls. also refer to note:335608 Trnsln of 2nd and 3rd lcl crcy fm 1st lcl/trns crcy.
I hope the above information helps you out......
Best Regards,
Gladys Xing

FB50 - Amount in Local Currency

Gurus,
When we use the transaction FB50, on the first screen the field u2018Amount in local currencyu2019 is grayed out. This field becomes editable when we double-click the entered line item. Since this involves additional steps, our requirement is to make the field editable in the first screen itself (like when we use transaction F-02).
Is this possible and if yes, how. I have tried transaction FB00 but could not make the field editable in the first screen.
Thanks & Regards,
Sameer S. Gupte

Hello,
It is not possible
Based on the Currency and Amount in document currency that you have entered in FB50, the amount is local currency gets calculated.
Regards,
Ravi

Amount in Local Currency Field not showing up under PO history tab

Similar Messages

Maybe you are looking for