Amount is double in query but correct in DSO

Good morning
Please assist with the following?
I am extracting data vir DB Connect.
Amounts for certain records in query doubles!
I have checked the PSA and amounts for the records are correct.
I have checked the active table in the DSO, the amounts are correct
When I run a query on DSO data, the amounts for a few records are duplicated.
I have run the query from RSRT and the amounts for these records are still doubled...but for most of the records...correct.
I have changed the cache settings, rerun the query, deleted the cache etc..still doubled amounts.
Can any one perhaps guide me where to check?
Thanks in advance.
Cj

Good morning everybody..
Thanks for all the anwers received, you were really helpfull.
What an investigation!!! I have established that the master data on the Oracle database from where I extrcat the data has been changed by business without informing the BW team. This causes the amounts to duplicate in certain cases as certain contracts now can have 2 VIN numbers. If I remove the applicable master data field (VIN) from the query, then the amounts are correct.
Amount are only duplicated in those cases where a VIN number has changed.
Thanks again!
Have a nice day!
Cj

Similar Messages

Sum of amount field in the Query

Hello folks,
I have a amount field in the query, along with the amount field I also need to show sum of all the rows for this amount fields, can some one guide which is best way of doing it?
Thanks,
KK

Thanks for the response's...Rama, Prasad and Sandesh!
I have changed the Property of the Amount field (SAP Standard Infoobject) to Calculated Result as 'Summation' but when I tried to save the changes in Query designer I am getting following error
runtime error '91'
Object variable or with block variable not set
runtime error '4XX'
ActiveX component can't create object
And its disconnecting from BEX Server...how can I resolve this error?
Thanks,
KK
Edited by: kumar K on Aug 21, 2008 10:46 AM

CHAR's value in the query but not in the report??

Hi all,
I loaded master data and crm transaction data from ODS to Cube. The data is in the cube but there is no value in my report when running it. EX: there are some CHARs in my report, I checked those CHARs have value in the query but it shows 'not assign' in my report when I run it. What happen?
Thanks.
J.

Please see below text and also the sent link..
If a navigation attribute is used in an aggregate, this aggregate has to be adjusted using a change run as soon as new values are loaded for the navigation attribute (when master data for the characteristic belonging to the navigation attribute is loaded.) This change run is usually one of the processes that are critical to the system performance of a production BW system. This is why, by avoiding using navigation attributes or not using navigation attributes in aggregates, you can improve the performance of this process. On the other hand, not using navigation attributes in aggregates can lead to poor query response times. The data modeler needs to find the right balance.
http://help.sap.com/saphelp_nw04/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm
cheers,
Vishvesh

Multiple copies of podcasts appear in iTunes on my computer, but correctly on my iPhone 4S. How do eliminate multiple copies in iTunes on my PC?

Multiple copies of podcasts appear in iTunes on my computer, but correctly on my iPhone 4S. How do eliminate multiple copies in iTunes on my PC?

Hi AkMat.
Have you actually opened these files to see what they are yet? The few Apps I've downloaded (not from iTunes) typically come with a few files. The actual app, the instructions/help/TOU and sometimes an uninstall.
mwn
Message was edited by: much wiser now

A charicteristic exists in a query,but i can't find it in the cube from

Hi:
There is a charicteristic in a query, but i can't find it in the char list in the multiinfocube from which the query retrieve data. so why did the charicteristic exist in the char list of the query?

Hi Guixin,
A navigational attribute allows you to include data from this attribute independantly in the query and use it in all navigation functions. It behaves exactly like a characteristic in a query, but unlike a characteristic, the values for the navigational attribute are not stored in the InfoCube; the values are pulled from the master data tables. Lets say you have Customer info coming in as transactional data and have Customer included in your cube. Now you also want to filter by country of Customer, but Country is not provided in the transactional data. You can include Country from the Customer attributes (navigational) as a navigational attribute in your cube, and use it in your queries.
Hope this helps...

I bought a team license for two computers, the purchase was recorded on the credit card and the amount recorded in the making, but was unable to validate the association staff . I received an email stating that Adobe could not release the payment and that

I bought a team license for two computers, the purchase was recorded on the credit card and the amount recorded in the making, but was unable to validate the association staff .
I received an email stating that Adobe could not release the payment and that I should validate the method of payment , tried to insert another card number but the system does not accept the security VAT reporting error message. How do I validate my license with association staff and confirm the payment card?

Hi Daniel,
For any sort of payment related matter, kindly contact our support team via: http://helpx.adobe.com/in/contact.html?step=CCSN_adobe-id-signing-in_stillNeedHelp
If you are unable to use chat option kindly try below mentioned steps.
Try different browser.
Delete cookies and cache
If you are still not able to chat, Kindly reply with the below mentioned information.
OS version:
Browser Version:
You can also try: http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
Thanks,
Atul Saini

Spry Tabbed Panels - not correct in IE but correct in Chrome and MF

Hi,
I'm having problems with an extension I used for a client, so I want to use the Spry tabbed panels form dreamweaver, but they in IE8 it puts all the content under each other in the first tab ??
In Chrome and MF its correct. Do you know about this problem or is it because I did something wrong?
see: www.zorgfilosofie.nl/index2
The other pages where made with an extension but with that script my client can't edit with contribute. That's why I want to implement Dreamweaver Spry Tabbed Panels.
Thanks for answering!
Carla

Hello there from down under J
Het was mooi weer, maar vandaag regent het.
Toch zijn hier in deze kamer veel zonnestralen, want het probleem is opgelost!
I searched the whole evening for alternative but it did’t work with templates.
With the js files the problem is solved.
I don’t understand why the js file was not correct, because I just bought CS5.5
Where do I have to put de file so the problem will not happen again when I make another site?
Thanks a lot!
Best regards and take some sun with you!
Carla
Van: altruistic gramps [email protected]
Verzonden: woensdag 5 oktober 2011 2:16
Aan: Carla Leliveld
Onderwerp: Spry Tabbed Panels - not correct in IE but correct in Chrome and MF
Re: Spry Tabbed Panels - not correct in IE but correct in Chrome and MF
created by altruistic gramps <http://forums.adobe.com/people/altruistic+gramps> in Spry Framework for Ajax - View the full discussion <http://forums.adobe.com/message/3954185#3954185

HT3702 My bank was charge me the following amount of USD 1. But i do not have any purchase of USD1. Please check and refund.

My bank was charged me the following amount of USD 1. But i do not have any purchase of USD1. Please check and refund.

We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple.
The HT3702 page that you posted from tells you what it is :
As with many other merchants, the iTunes Store and Mac App Store places an authorization hold on your payment card account for the approximate amount of any purchase you make. If you update your billing information, the iTunes Store or Mac App Store will place an authorization hold on your payment card account, usually in the amount of 1 USD or the local currency equivalent, to verify your account information.
Authorization holds are removed by your financial institution shortly after your purchase clears. The time it takes to remove authorization requests varies by financial institution.

The same query but different plan?

Hi all
I don't understand why the same query but Oracle use different plan
explain plan for select far.id,fab.id
from agent_body fab
INNER JOIN agent_ref far ON (far.bodyid = fab.id)
WHERE fab.id=72449;
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time | Pstart| Pstop |
| 0 | SELECT STATEMENT | | 1 | 18 | 2 (0)| 00:00:01 | | |
| 1 | NESTED LOOPS | | 1 | 18 | 2 (0)| 00:00:01 | | |
| 2 | PARTITION HASH SINGLE | | 1 | 6 | 1 (0)| 00:00:01 | 4 | 4 |
|* 3 | INDEX UNIQUE SCAN | PK_AGENT_BODY | 1 | 6 | 1 (0)| 00:00:01 | 4 | 4 |
| 4 | PARTITION HASH ALL | | 1 | 12 | 1 (0)| 00:00:01 | 1 | 4 |
| 5 | TABLE ACCESS BY LOCAL INDEX ROWID| AGENT_REF | 1 | 12 | 1 (0)| 00:00:01 | 1 | 4 |
|* 6 | INDEX RANGE SCAN | IXAGRAD | 1 | | 1 (0)| 00:00:01 | 1 | 4 |
Predicate Information (identified by operation id):
3 - access("FAB"."ID"=72449)
6 - access("FAR"."BODYID"=72449)
AND
explain plan for select far.id,fab.id
from agent_ref far,agent_body fab
where fab.id=far.bodyid and far.id=2219306;
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time | Pstart| Pstop |
| 0 | SELECT STATEMENT | | 1 | 18 | 2 (0)| 00:00:01 | | |
| 1 | NESTED LOOPS | | 1 | 18 | 2 (0)| 00:00:01 | | |
| 2 | PARTITION HASH SINGLE | | 1 | 12 | 1 (0)| 00:00:01 | 3 | 3 |
| 3 | TABLE ACCESS BY LOCAL INDEX ROWID| AGENT_REF | 1 | 12 | 1 (0)| 00:00:01 | 3 | 3 |
|* 4 | INDEX UNIQUE SCAN | PK_AGENT_REF | 1 | | 1 (0)| 00:00:01 | 3 | 3 |
| 5 | PARTITION HASH ITERATOR | | 3348K| 19M| 1 (0)| 00:00:01 | KEY | KEY |
|* 6 | INDEX UNIQUE SCAN | PK_AGENT_BODY | 3348K| 19M| 1 (0)| 00:00:01 | KEY | KEY |
Predicate Information (identified by operation id):
4 - access("FAR"."ID"=2219306)
6 - access("FAB"."ID"="FAR"."BODYID")
Can anyone explain to me?
Thanks

user554265 wrote:
Hi all
I don't understand why the same query but Oracle use different plan
explain plan for select far.id,fab.id
from agent_body fab
INNER JOIN agent_ref far ON (far.bodyid = fab.id)
WHERE fab.id=72449;
AND
explain plan for select far.id,fab.id
from agent_ref far,agent_body fab
where fab.id=far.bodyid and far.id=2219306;
Can anyone explain to me?Perhaps this makes a difference...
WHERE fab.id=72449; and
and far.id=2219306; Essentially the two queries ARE different.

How to compare two amount colomns in the query ?

Hi,
I need to compare two amount colomns in the query and based on that i need to change the color of the colomn
Is it possible by using exceptions.if yes please tell me how to do it.
Regards
Ansari

Hi,
you can give this a try:
1) Create a formula keyfigure (Keyfigure A> Keyfigure B)* 1+(Keyfigure A< Keyfigure B)* 0, so here you get value as either 0 or 1,
2) Hide this Formula Keygiure for display in the report, and create a exception on this Formula keyfigure for its value 0 or 1 with the desired colors.
3) While defining the exception on the 3rd tab we get the option to specify the Columns for implication of this exception, their you can specify the desired 2 Keyfigures to be highlighted with the colors.
Hope this helps ..
Regards,
Umesh.

HT4859 I have iCloud for my iPhone, my daughters iphone and 2 of my ipads and have purchased the max amount of storage I can but still get a message saying i don't have enough space to store anymore. Do I need to put each device on their own account?

I have iCloud for my iPhone, my daughters iphone and 2 of my ipads and have purchased the max amount of storage I can but still get a message saying i don't have enough space to store anymore. Do I need to put each device on their own account?

adkennon wrote:
And maybe you don't talk to too many people but I've been on many forums on different websites where people have had similar problems and a lot of people in the store were having battery problems where they were draining too fast. What I learned is that all the people who did not download the updates are good. There phone is working the same. The people who have, they're having battery problems
I have downloaded every update and my battery life is better than any previous iPhone I have ever owned. I see posts from hundreds of people every day, and this is not a commonly reported problem. While there are a few random reports of battery problems, it is no more than I have seen for any other model or any other version of iOS in almost 8 years. Usually problems of rapid battery drain can be traced to bad apps (FaceBook is the worst offender) or corrupt data being synced from iCloud or other sources (gmail, Windows Live, Yahoo, etc).
The simple test is to restore the phone as New. Do not create any email accounts. Do not install any apps. Do not enable FaceTime or iMessage. Do not enable Twitter or any other social networking app. Use it for a day and check the battery usage. You will find that it is working well.
And also see this: http://www.overthought.org/blog/2014/the-ultimate-guide-to-solving-ios-battery-d rain. It is the best treatise I have seen on the subject of battery usage.

I was filing TAX thru TurboTax. While filing TurboTAx changed full amount which wen to iTunes but TurboTax app says "payment didn't go thru'. TurboTax suggest to contact iTunes Support to dismiss purchase or fix the problem.

I was filing TAX thru TurboTax. While filing TurboTAx changed full amount which wen to iTunes but TurboTax app says “payment didn’t go thru’. TurboTax suggest to contact iTunes Support to dismiss purchase or fix the problem.

you have paid for app and when app purchase will be approved then ony you should able to make payment for your TAX.
I had same problem. I called apple guys and got my money back than I use web version ofn turbo tax.
that works perfectly well.
problme with app is that you can not see your tax paper next year as web and app does not have any sync link.
use web version.

I have subscribed to the student package and I also received a confirmation SMS saying that the amount has been deducted. But when I sign in through creative cloud, it shows that I am still running on a trial version. Why is that?

I have subscribed to the student package and I also received a confirmation SMS saying that the amount has been deducted. But when I sign in through creative cloud, it shows that I am still running on a trial version. Why is that?

Sign in, activation, or connection errors | CS5.5 and later, Acrobat DC
Mylenium

App store showing wrong apple id when trying to update but correct id in settings

App store is showing the wrong apple id when trying to do an update but correct id in settings. How do I fix?

I had the same problem. After syncing my phone, my husband's ID was popping up for app updates. Apparently they were downloaded through his account to begin with, so deleting them and redownloading fixed my problem.

The query is correct but jdbc modify it !!

my query is
SELECT o.ID_pagamento, SUM (m.valore) FROM operazioni o, movimenti_magazzino m WHERE m.ID_operazioni = o.ID AND m.quantita < 0 GROUP BY o.ID_pagamento
but jdbc automatically executes a second query:
SELECT COUNT(*), O.ID_PAGAMENTO, SUM (M.VALORE) FROM OPERAZIONI O, MOVIMENTI_MAGAZZINO M WHERE M.ID_OPERAZIONI = O.ID AND M.QUANTITA < 0
without the "GROUP BY" the query is wrong
what can I do?
(I use jdk 1.3)

huh?
So the only thing that you are doing is the first query. You are not creating the second one nor are you using a 3rd party library that creates it.
Then it has nothing to do with your first query. And so it doesn't matter whether it is wrong or not.
Now it could be that you are doing something in your java code that causes this. For example trying 'count' the number of rows returned by using 'last'. If so it suggests there is a bug in the driver.
But that doesn't matter. Obviously doing its own query. So you are saving nothing by using the last() method. So you might as well do the query yourself and do it correctly.

Amount is double in query but correct in DSO

Similar Messages

Maybe you are looking for